Cabal revisions of accelerate-llvm-ptx-1.0.0.0
Hackage metadata revisions edit the .cabal file after upload; each diff below is one revision.
revision 1
-name: accelerate-llvm-ptx-version: 1.0.0.0-cabal-version: >= 1.10-tested-with: GHC == 7.8.*-build-type: Simple--synopsis: Accelerate backend generating LLVM-description:- This library implements a backend for the /Accelerate/ language which- generates LLVM-IR targeting CUDA capable GPUs. For further information,- refer to the main /Accelerate/ package:- <http://hackage.haskell.org/package/accelerate>--license: BSD3-license-file: LICENSE-author: Trevor L. McDonell-maintainer: Trevor L. McDonell <tmcdonell@cse.unsw.edu.au>-bug-reports: https://github.com/AccelerateHS/accelerate/issues-category: Compilers/Interpreters, Concurrency, Data, Parallelism----- Configuration flags--- ---------------------Flag nvvm- Default: False- Description: Use the NVVM library to generate optimised PTX--Flag debug- Default: False- Description:- Enable debug tracing message flags. Note that 'debug' must be enabled in the- base 'accelerate' package as well. See the 'accelerate' package for usage- and available options.--Flag bounds-checks- Default: True- Description: Enable bounds checking--Flag unsafe-checks- Default: False- Description: Enable bounds checking in unsafe operations--Flag internal-checks- Default: False- Description: Enable internal consistency checks----- Build configuration--- ---------------------Library- exposed-modules:- Data.Array.Accelerate.LLVM.PTX- Data.Array.Accelerate.LLVM.PTX.Foreign-- other-modules:- Data.Array.Accelerate.LLVM.PTX.Analysis.Device- Data.Array.Accelerate.LLVM.PTX.Analysis.Launch- Data.Array.Accelerate.LLVM.PTX.Array.Data- Data.Array.Accelerate.LLVM.PTX.Array.Prim- Data.Array.Accelerate.LLVM.PTX.Array.Remote- Data.Array.Accelerate.LLVM.PTX.Array.Table- Data.Array.Accelerate.LLVM.PTX.Context- Data.Array.Accelerate.LLVM.PTX.Debug- Data.Array.Accelerate.LLVM.PTX.State- Data.Array.Accelerate.LLVM.PTX.Target-- Data.Array.Accelerate.LLVM.PTX.Execute- Data.Array.Accelerate.LLVM.PTX.Execute.Async- Data.Array.Accelerate.LLVM.PTX.Execute.Stream- Data.Array.Accelerate.LLVM.PTX.Execute.Stream.Reservoir-- Data.Array.Accelerate.LLVM.PTX.CodeGen- Data.Array.Accelerate.LLVM.PTX.CodeGen.Base- Data.Array.Accelerate.LLVM.PTX.CodeGen.Fold- Data.Array.Accelerate.LLVM.PTX.CodeGen.FoldSeg- Data.Array.Accelerate.LLVM.PTX.CodeGen.Generate- Data.Array.Accelerate.LLVM.PTX.CodeGen.Loop- Data.Array.Accelerate.LLVM.PTX.CodeGen.Map- Data.Array.Accelerate.LLVM.PTX.CodeGen.Permute- Data.Array.Accelerate.LLVM.PTX.CodeGen.Queue- Data.Array.Accelerate.LLVM.PTX.CodeGen.Scan-- Data.Array.Accelerate.LLVM.PTX.Compile- Data.Array.Accelerate.LLVM.PTX.Compile.Link- Data.Array.Accelerate.LLVM.PTX.Compile.Libdevice-- Data.Array.Accelerate.LLVM.PTX.Execute.Environment- Data.Array.Accelerate.LLVM.PTX.Execute.Event- Data.Array.Accelerate.LLVM.PTX.Execute.Marshal-- build-depends:- base >= 4.7 && < 4.10- , accelerate == 1.0.*- , accelerate-llvm == 1.0.*- , bytestring >= 0.9- , containers >= 0.5 && <0.6- , cuda >= 0.7- , directory >= 1.0- , dlist >= 0.6- , fclabels >= 2.0- , filepath >= 1.0- , hashable >= 1.2- , llvm-hs >= 3.9- , llvm-hs-pure >= 3.9- , mtl >= 2.2.1- , pretty >= 1.1- , time >= 1.4- , unordered-containers >= 0.2-- default-language:- Haskell2010-- ghc-options: -O2 -Wall -fwarn-tabs-- if impl(ghc >= 8.0)- ghc-options: -Wmissed-specialisations-- if flag(nvvm)- cpp-options: -DACCELERATE_USE_NVVM- build-depends:- nvvm >= 0.7.5-- if flag(debug)- cpp-options: -DACCELERATE_DEBUG-- if flag(bounds-checks)- cpp-options: -DACCELERATE_BOUNDS_CHECKS-- if flag(unsafe-checks)- cpp-options: -DACCELERATE_UNSAFE_CHECKS-- if flag(internal-checks)- cpp-options: -DACCELERATE_INTERNAL_CHECKS---source-repository head- type: git- location: https://github.com/AccelerateHS/accelerate-llvm.git--source-repository this- type: git- tag: 1.0.0.0- location: https://github.com/AccelerateHS/accelerate-llvm.git-+name: accelerate-llvm-ptx +version: 1.0.0.0 +x-revision: 1 +cabal-version: >= 1.10 +tested-with: GHC == 7.8.* +build-type: Simple + +synopsis: Accelerate backend generating LLVM +description: + This library implements a backend for the /Accelerate/ language which + generates LLVM-IR targeting CUDA capable GPUs. For further information, + refer to the main <http://hackage.haskell.org/package/accelerate accelerate> + package. + . + [/Dependencies/] + . + Haskell dependencies are available from Hackage. The following external + libraries are alse required: + . + * <http://llvm.org LLVM> + . + * <https://developer.nvidia.com/cuda-downloads CUDA> + . + [/Installing LLVM/] + . + /Homebrew/ + . + Example using Homebrew on macOS: + . + > brew install llvm-hs/homebrew-llvm/llvm-4.0 + . + /Debian & Ubuntu/ + . + For Debian/Ubuntu based Linux distributions, the LLVM.org website provides + binary distribution packages. Check <http://apt.llvm.org apt.llvm.org> for + instructions for adding the correct package database for your OS version, + and then: + . + > apt-get install llvm-4.0-dev + . + /Building from source/ + . + If your OS does not have an appropriate LLVM distribution available, you can + also build from source. Detailed build instructions are available on + <http://releases.llvm.org/4.0.0/docs/CMake.html LLVM.org>. Make sure to + include the cmake build options + @-DLLVM_BUILD_LLVM_DYLIB=ON -DLLVM_LINK_LLVM_DYLIB=ON@ so that the @libLLVM@ + shared library will be built. Also ensure that the @LLVM_TARGETS_TO_BUILD@ + option includes the @NVPTX@ target (if not specified all targets are built). + . + [/Installing accelerate-llvm/] + . + To use @accelerate-llvm@ it is important that the @llvm-hs@ package is + installed against the @libLLVM@ shared library, rather than statically + linked, so that we can use LLVM from GHCi and Template Haskell. This is the + default configuration, but you can also enforce this explicitly by adding + the following to your @stack.yaml@ file: + . + > flags: + > llvm-hs: + > shared-llvm: true + . + Or by specifying the @shared-llvm@ flag to cabal: + . + > cabal install llvm-hs -fshared-llvm + . + +license: BSD3 +license-file: LICENSE +author: Trevor L. McDonell +maintainer: Trevor L. McDonell <tmcdonell@cse.unsw.edu.au> +bug-reports: https://github.com/AccelerateHS/accelerate/issues +category: Compilers/Interpreters, Concurrency, Data, Parallelism + + +-- Configuration flags +-- ------------------- + +Flag nvvm + Default: False + Description: Use the NVVM library to generate optimised PTX + +Flag debug + Default: False + Description: + Enable debug tracing message flags. Note that 'debug' must be enabled in the + base 'accelerate' package as well. See the 'accelerate' package for usage + and available options. + +Flag bounds-checks + Default: True + Description: Enable bounds checking + +Flag unsafe-checks + Default: False + Description: Enable bounds checking in unsafe operations + +Flag internal-checks + Default: False + Description: Enable internal consistency checks + + +-- Build configuration +-- ------------------- + +Library + exposed-modules: + Data.Array.Accelerate.LLVM.PTX + Data.Array.Accelerate.LLVM.PTX.Foreign + + other-modules: + Data.Array.Accelerate.LLVM.PTX.Analysis.Device + Data.Array.Accelerate.LLVM.PTX.Analysis.Launch + Data.Array.Accelerate.LLVM.PTX.Array.Data + Data.Array.Accelerate.LLVM.PTX.Array.Prim + Data.Array.Accelerate.LLVM.PTX.Array.Remote + Data.Array.Accelerate.LLVM.PTX.Array.Table + Data.Array.Accelerate.LLVM.PTX.Context + Data.Array.Accelerate.LLVM.PTX.Debug + Data.Array.Accelerate.LLVM.PTX.State + Data.Array.Accelerate.LLVM.PTX.Target + + Data.Array.Accelerate.LLVM.PTX.Execute + Data.Array.Accelerate.LLVM.PTX.Execute.Async + Data.Array.Accelerate.LLVM.PTX.Execute.Stream + Data.Array.Accelerate.LLVM.PTX.Execute.Stream.Reservoir + + Data.Array.Accelerate.LLVM.PTX.CodeGen + Data.Array.Accelerate.LLVM.PTX.CodeGen.Base + Data.Array.Accelerate.LLVM.PTX.CodeGen.Fold + Data.Array.Accelerate.LLVM.PTX.CodeGen.FoldSeg + Data.Array.Accelerate.LLVM.PTX.CodeGen.Generate + Data.Array.Accelerate.LLVM.PTX.CodeGen.Loop + Data.Array.Accelerate.LLVM.PTX.CodeGen.Map + Data.Array.Accelerate.LLVM.PTX.CodeGen.Permute + Data.Array.Accelerate.LLVM.PTX.CodeGen.Queue + Data.Array.Accelerate.LLVM.PTX.CodeGen.Scan + + Data.Array.Accelerate.LLVM.PTX.Compile + Data.Array.Accelerate.LLVM.PTX.Compile.Link + Data.Array.Accelerate.LLVM.PTX.Compile.Libdevice + + Data.Array.Accelerate.LLVM.PTX.Execute.Environment + Data.Array.Accelerate.LLVM.PTX.Execute.Event + Data.Array.Accelerate.LLVM.PTX.Execute.Marshal + + build-depends: + base >= 4.7 && < 4.10 + , accelerate == 1.0.* + , accelerate-llvm == 1.0.* + , bytestring >= 0.9 + , containers >= 0.5 && <0.6 + , cuda >= 0.7 + , directory >= 1.0 + , dlist >= 0.6 + , fclabels >= 2.0 + , filepath >= 1.0 + , hashable >= 1.2 + , llvm-hs >= 3.9 + , llvm-hs-pure >= 3.9 + , mtl >= 2.2.1 + , pretty >= 1.1 + , time >= 1.4 + , unordered-containers >= 0.2 + + default-language: + Haskell2010 + + ghc-options: -O2 -Wall -fwarn-tabs + + if impl(ghc >= 8.0) + ghc-options: -Wmissed-specialisations + + if flag(nvvm) + cpp-options: -DACCELERATE_USE_NVVM + build-depends: + nvvm >= 0.7.5 + + if flag(debug) + cpp-options: -DACCELERATE_DEBUG + + if flag(bounds-checks) + cpp-options: -DACCELERATE_BOUNDS_CHECKS + + if flag(unsafe-checks) + cpp-options: -DACCELERATE_UNSAFE_CHECKS + + if flag(internal-checks) + cpp-options: -DACCELERATE_INTERNAL_CHECKS + + +source-repository head + type: git + location: https://github.com/AccelerateHS/accelerate-llvm.git + +source-repository this + type: git + tag: 1.0.0.0 + location: https://github.com/AccelerateHS/accelerate-llvm.git + -- vim: nospell
revision 2
name: accelerate-llvm-ptx version: 1.0.0.0 -x-revision: 1 +x-revision: 2 cabal-version: >= 1.10 tested-with: GHC == 7.8.* build-type: Simple , fclabels >= 2.0 , filepath >= 1.0 , hashable >= 1.2 - , llvm-hs >= 3.9 - , llvm-hs-pure >= 3.9 + , llvm-hs == 4.0.* + , llvm-hs-pure == 4.0.* , mtl >= 2.2.1 , pretty >= 1.1 , time >= 1.4