prettyprinter-1: src/Data/Text/Prettyprint/Doc.hs
-- |
-- Module : Data.Text.Prettyprint.Doc
-- Copyright : Daan Leijen (c) 2000, http://www.cs.uu.nl/~daan
-- Max Bolingbroke (c) 2008, http://blog.omega-prime.co.uk
-- David Luposchainsky (c) 2016, http://github.com/quchen
-- License : BSD-style (see the file LICENSE.md)
-- Maintainer : David Luposchainsky <dluposchainsky (λ) google>
-- Stability : experimental
-- Portability : portable
--
-- = Overview
--
-- This module defines a prettyprinter to format text in a flexible and
-- convenient way. The idea is to combine a 'Doc'ument out of many small
-- components, then using a layouter to convert it to an easily renderable
-- 'SimpleDocStream', which can then be rendered to a variety of formats, for
-- example plain 'Text'.
--
-- The documentation consists of several parts:
--
-- 1. Just below is some general information about the library.
-- 2. The actual library with extensive documentation and examples
-- 3. Migration guide for users familiar with (ansi-)wl-pprint
--
-- == Starting out
--
-- As a reading list for starters, some of the most commonly used functions in
-- this module include '<>', 'hsep', '<+>', 'vsep', 'align', 'hang'. These cover
-- many use cases already, and many other functions are variations or
-- combinations of these.
--
-- = Simple example
--
-- Let’s prettyprint a simple Haskell type definition. First, intersperse @->@
-- and add a leading @::@,
--
-- >>> let prettyType = align . sep . zipWith (<+>) ("::" : repeat "->")
--
-- The 'sep' function is one way of concatenating documents, there are multiple
-- others, e.g. 'vsep', 'cat' and 'fillSep'. In our case, 'sep' space-separates
-- all entries if there is space, and newlines if the remaining line is too
-- short.
--
-- Second, prepend the name to the type,
--
-- >>> let prettyDecl n tys = pretty n <+> prettyType tys
--
-- Now we can define a document that contains some type signature:
--
-- >>> let doc = prettyDecl "example" ["Int", "Bool", "Char", "IO ()"]
--
-- This document can now be printed, and it automatically adapts to available
-- space. If the page is wide enough (80 characters in this case), the
-- definitions are space-separated,
--
-- >>> putDocW 80 doc
-- example :: Int -> Bool -> Char -> IO ()
--
-- If we narrow the page width to only 20 characters, the /same document/
-- renders vertically aligned:
--
-- >>> putDocW 20 doc
-- example :: Int
-- -> Bool
-- -> Char
-- -> IO ()
--
-- Speaking of alignment, had we not used 'align', the @->@ would be at the
-- beginning of each line, and not beneath the @::@.
--
-- = General workflow
--
-- @
-- ╭───────────────╮ ╭───────────────────╮
-- │ 'vsep', 'pretty', │ │ 'Doc' │
-- │ '<+>', 'nest', ├─────▷│ (rich document) │
-- │ 'align', … │ ╰─────────┬─────────╯
-- ╰───────────────╯ │
-- │ Layout algorithms
-- │ e.g. 'layoutPretty'
-- ▽
-- ╭───────────────────╮
-- │ 'SimpleDocStream' │
-- │ (simple document) │
-- ╰─────────┬─────────╯
-- │
-- │ Renderers
-- │
-- ╭───────────────────┼───────────────────╮
-- │ │ │
-- ▽ ▽ ▽
-- ╭───────────────╮ ╭───────────────╮ ╭───────────────╮
-- │ Plain 'Text' │ │ ANSI terminal │ │ other/custom │
-- ╰───────────────╯ ╰───────────────╯ ╰───────────────╯
-- @
--
-- = How the layout works
--
-- There are two key concepts to laying a document out: the available width, and
-- 'group'ing.
--
-- == Available width
--
-- The page has a certain maximum width, which the layouter tries to not exceed,
-- by inserting line breaks where possible. The functions given in this module
-- make it fairly straightforward to specify where, and under what
-- circumstances, such a line break may be inserted by the layouter, for example
-- via the 'sep' function.
--
-- There is also the concept of /ribbon width/. The ribbon is the part of a line
-- that is printed, i.e. the line length without the leading indentation. The
-- layouters take a ribbon fraction argument, which specifies how much of a line
-- should be filled before trying to break it up. A ribbon width of 0.5 in a
-- document of width 80 will result in the layouter to try to not exceed @0.5*80 =
-- 40@ (ignoring current indentation depth).
--
-- == Grouping
--
-- A document can be 'group'ed, which tells the layouter that it should attempt
-- to collapse it to a single line. If the result does not fit within the
-- constraints (given by page and ribbon widths), the document is rendered
-- unaltered. This allows fallback definitions, so that we get nice results even
-- when the original document would exceed the layout constraints.
module Data.Text.Prettyprint.Doc (
-- * Documents
Doc,
-- * Basic functionality
Pretty(..),
emptyDoc, nest, line, line', softline, softline', hardline, group, flatAlt,
-- * Alignment functions
--
-- | The functions in this section cannot be described by Wadler's original
-- functions. They align their output relative to the current output
-- position - in contrast to @'nest'@ which always aligns to the current
-- nesting level. This deprives these functions from being \'optimal\'. In
-- practice however they prove to be very useful. The functions in this
-- section should be used with care, since they are more expensive than the
-- other functions. For example, @'align'@ shouldn't be used to pretty print
-- all top-level declarations of a language, but using @'hang'@ for let
-- expressions is fine.
align, hang, indent, encloseSep, list, tupled,
-- * Binary functions
(<>), (<+>),
-- * List functions
-- | The 'sep' and 'cat' functions differ in one detail: when 'group'ed, the
-- 'sep's replace newlines wich 'space's, while the 'cat's simply remove
-- them. If you're not sure what you want, start with the 'sep's.
concatWith,
-- ** 'sep' family
--
-- | When 'group'ed, these will replace newlines with spaces.
hsep, vsep, fillSep, sep,
-- ** 'cat' family
--
-- | When 'group'ed, these will remove newlines.
hcat, vcat, fillCat, cat,
-- ** Others
punctuate,
-- * Reactive/conditional layouts
--
-- | Lay documents out differently based on current position and the page
-- layout.
column, nesting, width, pageWidth,
-- * Filler functions
--
-- | Fill up available space
fill, fillBreak,
-- * General convenience
--
-- | Useful helper functions.
plural, enclose, surround,
-- * Bracketing functions
--
-- | Enclose documents in common ways.
squotes, dquotes, parens, angles, brackets, braces,
-- * Named characters
--
-- | Convenience definitions for common characters
lparen, rparen, langle, rangle, lbrace, rbrace, lbracket, rbracket, squote,
dquote, semi, colon, comma, space, dot, slash, backslash, equals, pipe,
-- ** Annotations
annotate,
unAnnotate,
reAnnotate,
unAnnotateS,
reAnnotateS,
-- * Optimization
--
-- Render documents faster
fuse, FusionDepth(..),
-- * Layout
--
-- | Laying a 'Doc'ument out produces a straightforward 'SimpleDocStream'
-- based on parameters such as page width and ribbon size, by evaluating how
-- a 'Doc' fits these constraints the best. There are various ways to render
-- a 'SimpleDocStream'. For the common case of rendering a 'SimpleDocStream'
-- as plain 'Text' take a look at "Data.Text.Prettyprint.Doc.Render.Text".
SimpleDocStream(..),
PageWidth(..), LayoutOptions(..), defaultLayoutOptions,
layoutPretty, layoutCompact, layoutSmart,
-- * Migration guide
--
-- $migration
) where
import Data.Semigroup
import Data.Text.Prettyprint.Doc.Internal
-- $setup
--
-- (Definitions for the doctests)
--
-- >>> :set -XOverloadedStrings
-- >>> import Data.Text.Prettyprint.Doc.Render.Text
-- >>> import Data.Text.Prettyprint.Doc.Util
-- $migration
--
-- If you're already familiar with (ansi-)wl-pprint, you'll recognize many
-- functions in this module, and they work just the same way. However, a couple
-- of definitions are missing:
--
-- - @char@, @string@, @double@, … – these are all special cases of the
-- overloaded @'pretty'@ function.
-- - @\<$>@, @\<$$>@, @\</>@, @\<//>@ are special cases of
-- @'vsep'@, @'vcat'@, @'fillSep'@, @'fillCat'@ with only two documents.
-- - If you need 'String' output, use 'T.unpack' on the generated renderings.
-- - The /display/ functions are moved to the rendering submodules, for
-- example conversion to plain 'Text' is in the
-- "Data.Text.Prettyprint.Doc.Render.Text" module.
-- - The /render/ functions are called /layout/ functions.
-- - @SimpleDoc@ was renamed to @'SimpleDocStream'@, in order to make it
-- clearer in the presence of @SimpleDocTree@.
-- - Instead of providing an own colorization function for each
-- color\/intensity\/layer combination, they have been combined in 'color',
-- 'colorDull', 'bgColor', and 'bgColorDull' functions.