hslua-1.1.2: CHANGELOG.md

## Changelog

### 1.1.2

Released 2020-06-02

- Revert signature of function `pushList` to it's proper 1.1
  value. This fixes a mistake which made caused the 1.1.1 release
  to be in violation of the PVP versioning policy.

- Module Foreign.Lua.Peek: add function `pushKeyValuePairs` (Alex
  Loomis).

### 1.1.1

Released 2020-06-02

*WARNING*: This version does not conform to the PVP versioning
policy, due to a unintended signature change of function
`pushList`. It is recommended not to use this version.

- New module Foreign.Lua.Push: provides functions which marshal
  and push Haskell values onto Lua's stack.

  Most functions in Foreign.Lua.Types.Pushable are now defined
  using functions from this module.

- New module Foreign.Lua.Peek: provides functions which unmarshal
  and retrieve Haskell values from Lua's stack. Contrary to `peek`
  from Foreign.Lua.Types.Peekable, the peeker functions in this
  module will never throw errors, but use an `Either` type to
  signal retrieval failure.

  The error type `PeekError` should not be considered final and
  will likely be subject to change in later versions.

- Module Foreign.Lua.Utf8: never throw errors when decoding UTF-8
  strings. Invalid UTF-8 input bytes no longer cause exceptions,
  but are replaced with the Unicode replacement character U+FFFD.

- Fixed missing and faulty Haddock documentation.

- Fixed a bug which caused unnecessary use of strings to represent
  floating point numbers under certain configurations.

### 1.1.0

Released 2020-03-25.

**WARNING:** The changes in this release are experimental. It is
recommended to skip this release unless the newly introduced
features are required.

- Allow custom error handling: conversion of Lua errors to
  Haskell exceptions and back is made configurable. Users can
  define their own exception/error handling strategies, even
  opening up the option to pass arbitrary exceptions through Lua.

    - New types exported from `Foreign.Lua.Types`:

        - `ErrorConversion`: defines the ways in which exceptions
          and errors are handled and converted.
        - `LuaEnvironment`: environment in which Lua computations
          are evaluated. Contains the Lua interpreter state and
          the error conversion strategy.

    - The environment of the `Lua` type is changed from a plain
      Lua `State` to the above mentioned `LuaEnvironment`.

    - New functions `run'` is exported from `Foreign.Lua.Util`
      and `Foreign.Lua`: it is analogous to `run`, but allows to
      run computations with a custom error conversion strategy.

    - New function `runWithConverter` exported from
      `Foreign.Lua.Core.Types` and `Foreign.Lua.Core`; like
      `run'`, but takes a custom state.

    - New function `unsafeRunWith` exported from
      `Foreign.Lua.Core.Types` and `Foreign.Lua.Core`; runs a
      computation without proper error handling.

    - New function `errorConversion` exported from
      `Foreign.Lua.Core.Types` and `Foreign.Lua.Core`: extract
      the error conversion strategy from the Lua type.

    - New function `throwErrorAsException` exported from
      `Foreign.Lua.Core.Error` and `Foreign.Lua.Core`: throws a
      Lua error as Haskell exception, using the current error
      conversion strategy.

- Function `runWith` is moved from module `Foreign.Lua.Core` to
  `Foreign.Lua.Util`.

- The module `Foreign.Lua.Utf8` is now exported.


### 1.0.3.2

Released 2019-08-21.

- Added flag to use hardcoded values for registry keys: The names
  of the registry keys used to store package information are
  available as CPP values from file lauxlib.h since Lua 5.3.4;
  compiling HsLua against older Lua versions was not possible, as
  those values were expected to exist.

  The respective values are now hardcoded into HsLua, and a new
  flag `hardcode-reg-key` is introduced, which will cause the use
  of these hardcoded values instead of those defined in
  lauxlib.h. Using this flag makes it possible to compile hslua
  against all Lua 5.3.* versions.

- Added missing C files for benchmarking to list of
  *extra-source-files*.

### 1.0.3.1

Released 2019-05-08.

- Prevent filenames being treated as strings in debug messages.
  Lua's `loadbuffer` takes a `source` description as an argument,
  which is used for debug messages. The `loadfile` function now
  adds a special prefix (`@`) to `source`, thus marking it as a
  filename.

### 1.0.3

Released 2019-05-04.

- New module `Foreign.Lua.Module`, containing helper functions to
  define and load modules from Haskell.

- Improve documentation of `open<lib>` (many thanks to Christian
  Charukiewicz.)

### 1.0.2

Released 2019-01-05.

- Fixed cross-compilation: placement of C import declarations
  were fixed, thereby resolving issues with cross-compilation.
  (Vanessa McHale and Faraz Maleknia)

- Added .gitattributes file, fixing the wrong language
  classification of the GitHub repository. (Vanessa McHale)

- Improved `toHaskellFunction` documentation. The documentation
  is now more specific on which Haskell exceptions are caught and
  which will lead to crashes.


### 1.0.1

- Exposed more functions from Lua's `lauxlib` library:

  + `getmetafield`,
  + `getmetatable'`,
  + `getsubtable`, and
  + `traceback`.

  The function `getsubtable` is a reimplementation instead of a wrapper
  to the C function for simplicity (thereby avoiding additional C
  wrappers).

- Fixed tests for GHC 8.6 by no longer depending on failable pattern
  matching.


### 1.0.0

#### New features

- Error handling at language borders has been vastly improved and is now
  mostly automatic. Haskell's `Foreign.Lua.Exception`s are transformed
  into Lua errors and *vice versa*. Lua-side wrappers are no longer
  necessary.

- Haskell functions are no longer pushed as userdata by
  `pushHaskellFunction`, but as C functions. This simplifies tasks where
  Lua expects true function objects object (for example when looking for
  module loaders).

- Added stack instance for

  + Data.Set.Set,
  + Integer,
  + Int,
  + Float, and
  + Double.

  Instances for numbers fall back to strings when the
  representation as a Lua number would cause a loss of precision.

- Haskell functions pushed with `pushHaskellFunction` can now be
  garbage collected by Lua without having to call back into
  Haskell. The callback into Haskell by the GC had previously
  caused programs to hang in some situations.

- Bindings to more Lua C API functions and macros: `isinteger`, `load`,
  `loadbuffer`, and `pushglobaltable`.

- Any Haskell value can be pushed to the Lua stack as userdata via
  `pushAny` and retrieved via `peekAny`. Additional functions are
  provided to setup the userdata metatable.

- The C preprocessor constants `LUA_LOADED_TABLE` and
  `LUA_PRELOAD_TABLE` are made available as
  `loadedTableRegistryField` and `preloadTableRegistryField`,
  respectively.

- Additional small helper functions:

  + `peekRead` -- read value from a string.
  + `popValue` -- peek value at the top of the Lua stack, then
    remove it from the stack regardless of whether peeking was
    successful or not.

#### Naming

- The *Lua* prefix was removed from types (`State`, `Integer`, `Number`,
  `Exception`) and the respective infix from functions (`try`, `run`,
  `runWith`, `runEither`). HsLua should be imported qualified to avoid
  name collisions.

- Terminology now consistently uses *exception* to refer to Haskell
  exceptions, and *error* for Lua errors; function names changed
  accordingly (`throwException`, `catchException`,
  `withExceptionMessage`).

- Module *Foreign.Lua.Api* was renamed to *Foreign.Lua.Core*.

- *Foreign.Lua.lerror* was renamed to *Foreign.Lua.error*.

- Typeclass *ToLuaStack* was renamed to *Pushable*.

- Typeclass *FromLuaStack* was renamed to *Peekable*.

- Cabal flag *use-pkgconfig* was renamed to *pkg-config* (which is the
   flag name used by other projects such a zlib).


#### Type signatures

- The return value of `lua_newuserdata` is *CSize* (was *CInt*).

- Table index parameter in `rawgeti` and `rawseti` must be of type
  *LuaInteger*, but were of type *Int*.

- The number of upvalues passed to `pushcclosure` must be of type
  *NumArgs*.

- `Lua.error` has type *Lua NumResults*, simplifying its use in
    HaskellFunctions.

- Retrieval functions which can fail, i.e. `tocfunction`, `tointeger`,
  `tonumber`, `tostring`, `tothread`, and `touserdata`, use the *Maybe*
  type to indicate success or failure, avoiding the need to perform
  additional checks.

#### Removed Features

- Support for Lua versions before 5.3 has been dropped.

- Support for GHC 7.8 has been dropped.

- `wrapHaskellFunction` has been made internal and is no longer
   exported.

#### Changed behavior

- Peekable instances for numbers and strings became more forgiving.
  Peeking of basic types now follows Lua's default conversion rules:

  + numbers can be given as strings, and *vice versa*;
  + any value can be converted into a boolean -- only `nil` and `false`
    are peeked as `False`, all other as `True`.

#### Other

- Many internal improvements and additions such as a benchmarking suite,
  code cleanups, better tests, etc.

### 0.9.5.{1,2}

- Relaxed upper bound on *exceptions*.

### 0.9.5

- Provide Optional as a replacement for OrNil. Exports of the latter
  have been fixed.
- Provide utility function `raiseError`: Its argument will be thrown as
  an error in Lua.
- Add `modifyLuaError`: The function lives in Foreign.Lua.Error and
  allows to alter error messages. This is most useful for amending
  errors with additional information.
- Fixed a bug in `toList` which left a element on the stack if
  deserializing that element lead to an error. This also affected the
  FromLuaStack instance for lists.
- Fixed a bug in `pairsFromTable` which left a key-value pair on the
  stack if either of them could not be read into the expected type. This
  also affected the FromLuaStack instance for Map.

### 0.9.4

- Make Lua an instance of MonadMask: MonadMask from Control.Monad.Catch
  allows to mask asynchronous exceptions. This allows to define a
  finalizer for Lua operations.
- Add functions and constants to refer to stack indices: The functions
  `nthFromBottom`, `nthFromTop` as well as the constants `stackTop` and
  `stackBottom` have been introduced. Numeric constants are less clear,
  and named constants can aid readability.
- Add type OrNil: This type can be used when dealing with optional
  arguments to Lua functions.
- Add function absindex: it converts the acceptable index `idx` into an
  equivalent absolute index (that is, one that does not depend on the
  stack top). The function calls `lua_absindex` when compiled with Lua
  5.2 or later; for Lua 5.1, it is reimplemented in Haskell.
- Functions in `tasty` which have been deprecated have been replaced
  with non-deprecated alternatives.


### 0.9.3

- Re-export more FunctionCalling helpers in `Foreign.Lua`: The typeclass
  `ToHaskellFunction` and the helper function `toHaskellFunction` are
  useful when working with functions. Importing them separately from
  `Foreign.Lua.FunctionCalling` was an unnecessary burden; they are
  therefor now re-exported by the main module.
- Export registry-relatd constants `refnil` and `noref`: The constants
  are related to Lua's registry functions (`ref` and `unref`).
- Add helper to convert functions into CFunction: A new helper
  `wrapHaskellFunction` is provided. It expects a
  HaskellImportedFunction userdata (as produced by
  `pushHaskellFunction`) on top of the stack and replaces it with a C
  function. The new function converts error values generated with
  `lerror` into Lua errors, i.e. it calls `lua_error`.
- Add utility function `setglobal'`: It works like `setglobal`, but
  works with packages and nested tables (dot-notation only).

### 0.9.2

- Add cabal flag 'export-dynamic': Default behavior is to include all symbols in
  the dynamic symbol table, as this enables users to load dynamic lua libraries.
  However, it is sometimes desirable to disable, e.g., when compiling a fully
  static binary. See jgm/pandoc#3986.

### 0.9.1

- Increase user-friendlyness of error messages: The error message returned by
  `toHaskellFunction` hinted at the fact that the failing function is a Haskell
  function. This is mostly unnecessary information and might have confused
  users.

### 0.9.0

- Added cabal flag to allow fully safe garbage collection: Lua garbage
  collection can occur in most of the API functions, even in those usually not
  calling back into haskell and hence marked as optimizable. The effect of this
  is that finalizers which call Haskell functions will cause the program to
  hang. A new flag `allow-unsafe-gc` is introduced and enabled by default.
  Disabling this flag will mark more C API functions as potentially calling back
  into Haskell. This has a serious performance impact.
- `FromLuaStack` and `ToLuaStack` instances for lazy ByteStrings are added.
- None-string error messages are handled properly: Lua allows error messages to
  be of any type, but the haskell error handlers expected string values. Tables,
  booleans, and other non-string values are now handled as well and converted to
  strings.

### 0.8.0

- Use newtype definitions instead of type aliases for LuaNumber and LuaInteger.
  This makes it easier to ensure the correct numeric instances in situations
  where Lua might have been compiled with 32-bit numbers.
- Instances of `FromLuaStack` and `ToLuaStack` for `Int` are removed. The
  correctness of these instances cannot be guaranteed if Lua was compiled with a
  non-standard integer type.

### 0.7.1

- The flag `lua_32bits` was added to allow users to compile Lua for 32-bit
  systems.
- When reading a list, throw an error if the lua value isn't a table instead of
  silently returning an empty list.

### 0.7.0

- Tuples from pairs to octuples have been made instances of `FromLuaStack` and
  `ToLuaStack`.
- New functions `dostring` and `dofile` are provided to load and run strings and
  files in a single step.
- `LuaStatus` was renamed to `Status`, the *Lua* prefix was removed from its
  type constructors.
- The constructor `ErrFile` was added to `Status`. It is returned by `loadfile`
  if the file cannot be read.
- Remove unused FFI bindings and unused types, including all functions unsafe to
  use from within Haskell and the library functions added with 0.5.0. Users with
  special requirements should define their own wrappers and raw bindings.
- The module *Foreign.Lua.Api.SafeBindings* was merge into
  *Foreign.Lua.Api.RawBindings*.
- FFI bindings are changed to use newtypes where sensible, most notably
  `StackIndex`, `NumArgs`, and `NumResults`, but also the newly introduced
  newtypes `StatusCode`, `TypeCode`, and `LuaBool`.
- Add functions `tointegerx` and `tonumberx` which can be used to get and check
  values from the stack in a single step.
- The signature of `concat` was changed from `Int -> Lua ()` to
  `NumArgs -> Lua ()`.
- The signature of `loadfile` was changed from `String -> Lua Int` to
  `String -> Lua Status`.
- The type `LTYPE` was renamed to `Type`, its constructors were renamed to
  follow the pattern `Type<Typename>`. `LuaRelation` was renamed to
  `RelationalOperator`, the *Lua* prefix was removed from its constructors.
- Add function `tolist` to allow getting a generic list from the stack without
  having to worry about the overlapping instance with `[Char]`.


### 0.6.0

* Supported Lua Versions now include Lua 5.2 and Lua 5.3. LuaJIT and Lua 5.1
  remain supported as well.
* Flag `use-pkgconfig` was added to allow discovery of library and include paths
  via pkg-config. Setting a specific Lua version flag now implies `system-lua`.
  (Sean Proctor)
* The module was renamed from `Scripting.Lua` to `Foreign.Lua`. The code is now
  split over multiple sub-modules. Files processed with hsc2hs are restricted to
  Foreign.Lua.Api.
* A `Lua` monad (reader monad over LuaState) is introduced. Functions which took
  a LuaState as their first argument are changed into monadic functions within
  that monad.
* Error handling has been redesigned completely. A new LuaException was
  introduced and is thrown in unexpected situations. Errors in lua which are
  leading to a `longjmp` are now caught with the help of additional C wrapper
  functions. Those no longer lead to uncontrolled program termination but are
  converted into a LuaException.
* `peek` no longer returns `Maybe a` but just `a`. A LuaException is thrown if
  an error occurs (i.e. in situtations where Nothing would have been returned
  previously).
* The `StackValue` typeclass has been split into `FromLuaStack` and
  `ToLuaStack`. Instances not satisfying the law `x == push x *> peek (-1)` have
  been dropped.
* Documentation of API functions was improved. Most docstrings have been copied
  from the official Lua manual, enriched with proper markup and links, and
  changed to properly describe hslua specifics when necessary.
* Example programs have been moved to a separate repository.
* Unused files were removed. (Sean Proctor)

### 0.5.0

* New raw functions for `luaopen_base`, `luaopen_package`, `luaopen_string`,
  `luaopen_table`, `luaopen_math`, `luaopen_io`, `luaopen_os`, `luaopen_debug`
  and their high-level wrappers (with names `openbase`, `opentable` etc.)
  implemented.
* Remove custom versions of `loadfile` and `loadstring`.
* Drop support for GHC versions < 7.8, avoid compiler warnings.
* Ensure no symbols are stripped when linking the bundled lua interpreter.
* Simplify `tostring` function definition. (Sean Proctor)
* Explicitly deprecate `strlen`. (Sean Proctor)
* Add links to lua documentation for functions wrapping the official lua C API.
  (Sean Proctor).

### 0.4.1

* Bugfix(#30): `tolist` wasn't popping elements of the list from stack.

### 0.4.0

* `pushstring` and `tostring` now uses `ByteString` instead of `[Char]`.
* `StackValue [Char]` instance is removed, `StackValue ByteString` is added.
* `StackValue a => StackValue [a]` instance is added. It pushes a Lua array to
  the stack. `pushlist`, `islist` and `tolist` functions are added.
* Type errors in Haskell functions now propagated differently. See the
  `Scripting.Lua` documentation for detailed explanation. This should fix
  segfaults reported several times.
* `lua_error` function is removed, it's never safe to call in Haskell.

Related issues and pull requests: #12, #26, #24, #23, #18.

### 0.3.14

* Pkgconf-based setup removed. Cabal is now using `extra-libraries` to link with Lua.
* `luajit` flag is added to link hslua with LuaJIT.

### 0.3.13

* Small bugfix related with GHCi running under Windows.

### 0.3.12

* `pushrawhsfunction` and `registerrawhsfunction` functions are added.
* `apicheck` flag is added to Cabal package to enable Lua API checking. (useful for debugging)

### 0.3.11

* `luaL_ref` and `luaL_unref` functions are added.