hledger-1.9: hledger.txt
hledger(1) hledger User Manuals hledger(1)
NAME
hledger - a command-line accounting tool
SYNOPSIS
hledger [-f FILE] COMMAND [OPTIONS] [ARGS]
hledger [-f FILE] ADDONCMD -- [OPTIONS] [ARGS]
hledger
DESCRIPTION
hledger is a cross-platform program for tracking money, time, or any
other commodity, using double-entry accounting and a simple, editable
file format. hledger is inspired by and largely compatible with
ledger(1).
Tested on unix, mac, windows, hledger aims to be a reliable, practical
tool for daily use.
This is hledger's command-line interface (there are also curses and web
interfaces). Its basic function is to read a plain text file describ-
ing financial transactions (in accounting terms, a general journal) and
print useful reports on standard output, or export them as CSV.
hledger can also read some other file formats such as CSV files, trans-
lating them to journal format. Additionally, hledger lists other
hledger-* executables found in the user's $PATH and can invoke them as
subcommands.
hledger reads data from one or more files in hledger journal, time-
clock, timedot, or CSV format specified with -f, or $LEDGER_FILE, or
$HOME/.hledger.journal (on windows, perhaps
C:/Users/USER/.hledger.journal). If using $LEDGER_FILE, note this must
be a real environment variable, not a shell variable. You can specify
standard input with -f-.
Transactions are dated movements of money between two (or more) named
accounts, and are recorded with journal entries like this:
2015/10/16 bought food
expenses:food $10
assets:cash
For more about this format, see hledger_journal(5).
Most users use a text editor to edit the journal, usually with an edi-
tor mode such as ledger-mode for added convenience. hledger's interac-
tive add command is another way to record new transactions. hledger
never changes existing transactions.
To get started, you can either save some entries like the above in
~/.hledger.journal, or run hledger add and follow the prompts. Then
try some commands like hledger print or hledger balance. Run hledger
with no arguments for a list of commands.
EXAMPLES
Two simple transactions in hledger journal format:
2015/9/30 gift received
assets:cash $20
income:gifts
2015/10/16 farmers market
expenses:food $10
assets:cash
Some basic reports:
$ hledger print
2015/09/30 gift received
assets:cash $20
income:gifts $-20
2015/10/16 farmers market
expenses:food $10
assets:cash $-10
$ hledger accounts --tree
assets
cash
expenses
food
income
gifts
$ hledger balance
$10 assets:cash
$10 expenses:food
$-20 income:gifts
--------------------
0
$ hledger register cash
2015/09/30 gift received assets:cash $20 $20
2015/10/16 farmers market assets:cash $-10 $10
More commands:
$ hledger # show available commands
$ hledger add # add more transactions to the journal file
$ hledger balance # all accounts with aggregated balances
$ hledger balance --help # show detailed help for balance command
$ hledger balance --depth 1 # only top-level accounts
$ hledger register # show account postings, with running total
$ hledger reg income # show postings to/from income accounts
$ hledger reg 'assets:some bank:checking' # show postings to/from this checking account
$ hledger print desc:shop # show transactions with shop in the description
$ hledger activity -W # show transaction counts per week as a bar chart
OPTIONS
General options
To see general usage help, including general options which are sup-
ported by most hledger commands, run hledger -h.
General help options:
-h --help
show general usage (or after COMMAND, command usage)
--version
show version
--debug[=N]
show debug output (levels 1-9, default: 1)
General input options:
-f FILE --file=FILE
use a different input file. For stdin, use - (default:
$LEDGER_FILE or $HOME/.hledger.journal)
--rules-file=RULESFILE
Conversion rules file to use when reading CSV (default:
FILE.rules)
--alias=OLD=NEW
rename accounts named OLD to NEW
--anon anonymize accounts and payees
--pivot FIELDNAME
use some other field or tag for the account name
-I --ignore-assertions
ignore any failing balance assertions
General reporting options:
-b --begin=DATE
include postings/txns on or after this date
-e --end=DATE
include postings/txns before this date
-D --daily
multiperiod/multicolumn report by day
-W --weekly
multiperiod/multicolumn report by week
-M --monthly
multiperiod/multicolumn report by month
-Q --quarterly
multiperiod/multicolumn report by quarter
-Y --yearly
multiperiod/multicolumn report by year
-p --period=PERIODEXP
set start date, end date, and/or reporting interval all at once
using period expressions syntax (overrides the flags above)
--date2
match the secondary date instead (see command help for other
effects)
-U --unmarked
include only unmarked postings/txns (can combine with -P or -C)
-P --pending
include only pending postings/txns
-C --cleared
include only cleared postings/txns
-R --real
include only non-virtual postings
-NUM --depth=NUM
hide/aggregate accounts or postings more than NUM levels deep
-E --empty
show items with zero amount, normally hidden (and vice-versa in
hledger-ui/hledger-web)
-B --cost
convert amounts to their cost at transaction time (using the
transaction price, if any)
-V --value
convert amounts to their market value on the report end date
(using the most recent applicable market price, if any)
--auto apply automated posting rules to modify transactions.
--forecast
apply periodic transaction rules to generate future transac-
tions, to 6 months from now or report end date.
When a reporting option appears more than once in the command line, the
last one takes precedence.
Some reporting options can also be written as query arguments.
Command options
To see options for a particular command, including command-specific
options, run: hledger COMMAND -h.
Command-specific options must be written after the command name, eg:
hledger print -x.
Additionally, if the command is an addon, you may need to put its
options after a double-hyphen, eg: hledger ui -- --watch. Or, you can
run the addon executable directly: hledger-ui --watch.
Command arguments
Most hledger commands accept arguments after the command name, which
are often a query, filtering the data in some way.
Argument files
You can save a set of command line options/arguments in a file, one per
line, and then reuse them by writing @FILENAME in a command line. To
prevent this expansion of @-arguments, precede them with a -- argument.
For more, see Save frequently used options.
Special characters
Option and argument values which contain problematic characters should
be escaped with double quotes, backslashes, or (best) single quotes.
Problematic characters means spaces, and also characters which are sig-
nificant to your command shell, such as less-than/greater-than. Eg:
hledger register -p 'last year' "accounts receivable (receiv-
able|payable)" amt:\>100.
Characters which are significant both to the shell and in regular
expressions sometimes need to be double-escaped. These include paren-
theses, the pipe symbol and the dollar sign. Eg, to match the dollar
symbol, bash users should do: hledger balance cur:'\$' or hledger bal-
ance cur:\\$.
When hledger is invoking an addon executable (like hledger-ui), options
and arguments get de-escaped once more, so you might need triple-escap-
ing. Eg: hledger ui cur:'\\$' or hledger ui cur:\\\\$ in bash. (The
number of backslashes in fish shell is left as an exercise for the
reader.)
Inside a file used for argument expansion, one less level of escaping
is enough. (And in this case, backslashes seem to work better than
quotes. Eg: cur:\$).
If in doubt, keep things simple:
o run add-on executables directly
o write options after the command
o enclose problematic args in single quotes
o if needed, also add a backslash to escape regexp metacharacters
If you're really stumped, add --debug=2 to troubleshoot.
Input files
hledger reads transactions from a data file (and the add command writes
to it). By default this file is $HOME/.hledger.journal (or on Windows,
something like C:/Users/USER/.hledger.journal). You can override this
with the $LEDGER_FILE environment variable:
$ setenv LEDGER_FILE ~/finance/2016.journal
$ hledger stats
or with the -f/--file option:
$ hledger -f /some/file stats
The file name - (hyphen) means standard input:
$ cat some.journal | hledger -f-
Usually the data file is in hledger's journal format, but it can also
be one of several other formats, listed below. hledger detects the
format automatically based on the file extension, or if that is not
recognised, by trying each built-in "reader" in turn:
Reader: Reads: Used for file extensions:
-----------------------------------------------------------------------------
journal hledger's journal format, also .journal .j .hledger
some Ledger journals .ledger
timeclock timeclock files (precise time .timeclock
logging)
timedot timedot files (approximate time .timedot
logging)
csv comma-separated values (data .csv
interchange)
If needed (eg to ensure correct error messages when a file has the
"wrong" extension), you can force a specific reader/format by prepend-
ing it to the file path with a colon. Examples:
$ hledger -f csv:/some/csv-file.dat stats
$ echo 'i 2009/13/1 08:00:00' | hledger print -ftimeclock:-
You can also specify multiple -f options, to read multiple files as one
big journal. There are some limitations with this:
o directives in one file will not affect the other files
o balance assertions will not see any account balances from previous
files
If you need those, either use the include directive, or concatenate the
files, eg: cat a.journal b.journal | hledger -f- CMD.
Smart dates
hledger's user interfaces accept a flexible "smart date" syntax (unlike
dates in the journal file). Smart dates allow some english words, can
be relative to today's date, and can have less-significant date parts
omitted (defaulting to 1).
Examples:
2009/1/1, 2009/01/01, simple dates, several sep-
2009-1-1, 2009.1.1 arators allowed
2009/1, 2009 same as above - a missing
day or month defaults to 1
1/1, january, jan, relative dates, meaning
this year january 1 of the current
year
next year january 1 of next year
this month the 1st of the current
month
this week the most recent monday
last week the monday of the week
before this one
lastweek spaces are optional
today, yesterday, tomorrow
Report start & end date
Most hledger reports show the full span of time represented by the
journal data, by default. So, the effective report start and end dates
will be the earliest and latest transaction or posting dates found in
the journal.
Often you will want to see a shorter time span, such as the current
month. You can specify a start and/or end date using -b/--begin,
-e/--end, -p/--period or a date: query (described below). All of these
accept the smart date syntax. One important thing to be aware of when
specifying end dates: as in Ledger, end dates are exclusive, so you
need to write the date after the last day you want to include.
Examples:
-b 2016/3/17 begin on St. Patrick's day
2016
-e 12/1 end at the start of decem-
ber 1st of the current
year (11/30 will be the
last date included)
-b thismonth all transactions on or
after the 1st of the cur-
rent month
-p thismonth all transactions in the
current month
date:2016/3/17- the above written as
queries instead
date:-12/1
date:thismonth-
date:thismonth
Report intervals
A report interval can be specified so that commands like register, bal-
ance and activity will divide their reports into multiple subperiods.
The basic intervals can be selected with one of -D/--daily,
-W/--weekly, -M/--monthly, -Q/--quarterly, or -Y/--yearly. More com-
plex intervals may be specified with a period expression. Report
intervals can not be specified with a query, currently.
Period expressions
The -p/--period option accepts period expressions, a shorthand way of
expressing a start date, end date, and/or report interval all at once.
Here's a basic period expression specifying the first quarter of 2009.
Note, hledger always treats start dates as inclusive and end dates as
exclusive:
-p "from 2009/1/1 to 2009/4/1"
Keywords like "from" and "to" are optional, and so are the spaces, as
long as you don't run two dates together. "to" can also be written as
"-". These are equivalent to the above:
-p "2009/1/1 2009/4/1"
-p2009/1/1to2009/4/1
-p2009/1/1-2009/4/1
Dates are smart dates, so if the current year is 2009, the above can
also be written as:
-p "1/1 4/1"
-p "january-apr"
-p "this year to 4/1"
If you specify only one date, the missing start or end date will be the
earliest or latest transaction in your journal:
-p "from 2009/1/1" everything after january
1, 2009
-p "from 2009/1" the same
-p "from 2009" the same
-p "to 2009" everything before january
1, 2009
A single date with no "from" or "to" defines both the start and end
date like so:
-p "2009" the year 2009; equivalent
to "2009/1/1 to 2010/1/1"
-p "2009/1" the month of jan; equiva-
lent to "2009/1/1 to
2009/2/1"
-p "2009/1/1" just that day; equivalent
to "2009/1/1 to 2009/1/2"
The argument of -p can also begin with, or be, a report interval
expression. The basic report intervals are daily, weekly, monthly,
quarterly, or yearly, which have the same effect as the -D,-W,-M,-Q, or
-Y flags. Between report interval and start/end dates (if any), the
word in is optional. Examples:
-p "weekly from 2009/1/1 to 2009/4/1"
-p "monthly in 2008"
-p "quarterly"
Note that weekly, monthly, quarterly and yearly intervals will always
start on the first day on week, month, quarter or year accordingly, and
will end on the last day of same period, even if associated period
expression specifies different explicit start and end date.
For example:
-p "weekly from 2009/1/1 to 2009/4/1" -
starts on 2008/12/29, closest preceed-
ing Monday
-p "monthly in 2008/11/25" - starts on
2018/11/01
-p "quar-
terly from 2009-05-05 to 2009-06-01" -
starts on 2009/04/01, ends on
2009/06/30, which are first and last
days of Q2 2009
-p "yearly from 2009-12-29" - starts on
2009/01/01, first day of 2009
The following more complex report intervals are also supported:
biweekly, bimonthly, every day|week|month|quarter|year,
every N days|weeks|months|quarters|years.
All of these will start on the first day of the requested period and
end on the last one, as described above.
Examples:
-p "bimonthly from 2008" - periods will
have boundaries on 2008/01/01,
2008/03/01, ...
-p "every 2 weeks" - starts on closest
preceeding Monday
-p "every 5 month from 2009/03" - peri-
ods will have boundaries on 2009/03/01,
2009/08/01, ...
If you want intervals that start on arbitrary day of your choosing and
span a week, month or year, you need to use any of the following:
every Nth day of week, every <weekday>, every Nth day [of month],
every Nth weekday [of month], every MM/DD [of year],
every Nth MMM [of year], every MMM Nth [of year].
Examples:
-p "every 2nd day of week" - periods
will go from Tue to Tue
-p "every Tue" - same
-p "every 15th day" - period boundaries
will be on 15th of each month
-p "every 2nd Monday" - period bound-
aries will be on second Monday of each
month
-p "every 11/05" - yearly periods with
boundaries on 5th of Nov
-p "every 5th Nov" - same
-p "every Nov 5th" - same
Show historical balances at end of 15th each month (N is exclusive end
date):
hledger balance -H -p "every 16th day"
Group postings from start of wednesday to end of next tuesday (N is
start date and exclusive end date):
hledger register checking -p "every 3rd day of week"
Depth limiting
With the --depth N option (short form: -N), commands like account, bal-
ance and register will show only the uppermost accounts in the account
tree, down to level N. Use this when you want a summary with less
detail. This flag has the same effect as a depth: query argument (so
-2, --depth=2 or depth:2 are basically equivalent).
Pivoting
Normally hledger sums amounts, and organizes them in a hierarchy, based
on account name. The --pivot FIELD option causes it to sum and orga-
nize hierarchy based on the value of some other field instead. FIELD
can be: code, description, payee, note, or the full name (case insensi-
tive) of any tag. As with account names, values containing colon:sepa-
rated:parts will be displayed hierarchically in reports.
--pivot is a general option affecting all reports; you can think of
hledger transforming the journal before any other processing, replacing
every posting's account name with the value of the specified field on
that posting, inheriting it from the transaction or using a blank value
if it's not present.
An example:
2016/02/16 Member Fee Payment
assets:bank account 2 EUR
income:member fees -2 EUR ; member: John Doe
Normal balance report showing account names:
$ hledger balance
2 EUR assets:bank account
-2 EUR income:member fees
--------------------
0
Pivoted balance report, using member: tag values instead:
$ hledger balance --pivot member
2 EUR
-2 EUR John Doe
--------------------
0
One way to show only amounts with a member: value (using a query,
described below):
$ hledger balance --pivot member tag:member=.
-2 EUR John Doe
--------------------
-2 EUR
Another way (the acct: query matches against the pivoted "account
name"):
$ hledger balance --pivot member acct:.
-2 EUR John Doe
--------------------
-2 EUR
Cost
The -B/--cost flag converts amounts to their cost at transaction time,
if they have a transaction price specified.
Market value
The -V/--value flag converts reported amounts to their current market
value. Specifically, when there is a market price (P directive) for
the amount's commodity, dated on or before today's date (or the report
end date if specified), the amount will be converted to the price's
commodity.
When there are multiple applicable P directives, -V chooses the most
recent one, or in case of equal dates, the last-parsed one.
For example:
# one euro is worth this many dollars from nov 1
P 2016/11/01 $1.10
# purchase some euros on nov 3
2016/11/3
assets:euros 100
assets:checking
# the euro is worth fewer dollars by dec 21
P 2016/12/21 $1.03
How many euros do I have ?
$ hledger -f t.j bal euros
100 assets:euros
What are they worth on nov 3 ? (no report end date specified, defaults
to the last date in the journal)
$ hledger -f t.j bal euros -V
$110.00 assets:euros
What are they worth on dec 21 ?
$ hledger -f t.j bal euros -V -e 2016/12/21
$103.00 assets:euros
Currently, hledger's -V only uses market prices recorded with P direc-
tives, not transaction prices (unlike Ledger).
Combining -B and -V
Using -B/-cost and -V/-value together is currently allowed, but the
results are probably not meaningful. Let us know if you find a use for
this.
Output destination
Some commands (print, register, stats, the balance commands) can write
their output to a destination other than the console. This is con-
trolled by the -o/--output-file option.
$ hledger balance -o - # write to stdout (the default)
$ hledger balance -o FILE # write to FILE
Output format
Some commands can write their output in other formats. Eg print and
register can output CSV, and the balance commands can output CSV or
HTML. This is controlled by the -O/--output-format option, or by spec-
ifying a .csv or .html file extension with -o/--output-file.
$ hledger balance -O csv # write CSV to stdout
$ hledger balance -o FILE.csv # write CSV to FILE.csv
Regular expressions
hledger uses regular expressions in a number of places:
o query terms, on the command line and in the hledger-web search form:
REGEX, desc:REGEX, cur:REGEX, tag:...=REGEX
o CSV rules conditional blocks: if REGEX ...
o account alias directives and options: alias /REGEX/ = REPLACEMENT,
--alias /REGEX/=REPLACEMENT
hledger's regular expressions come from the regex-tdfa library. In
general they:
o are case insensitive
o are infix matching (do not need to match the entire thing being
matched)
o are POSIX extended regular expressions
o also support GNU word boundaries (\<, \>, \b, \B)
o and parenthesised capturing groups and numeric backreferences in
replacement strings
o do not support mode modifiers like (?s)
Some things to note:
o In the alias directive and --alias option, regular expressions must
be enclosed in forward slashes (/REGEX/). Elsewhere in hledger,
these are not required.
o In queries, to match a regular expression metacharacter like $ as a
literal character, prepend a backslash. Eg to search for amounts
with the dollar sign in hledger-web, write cur:\$.
o On the command line, some metacharacters like $ have a special mean-
ing to the shell and so must be escaped at least once more. See Spe-
cial characters.
QUERIES
One of hledger's strengths is being able to quickly report on precise
subsets of your data. Most commands accept an optional query expres-
sion, written as arguments after the command name, to filter the data
by date, account name or other criteria. The syntax is similar to a
web search: one or more space-separated search terms, quotes to enclose
whitespace, prefixes to match specific fields, a not: prefix to negate
the match.
We do not yet support arbitrary boolean combinations of search terms;
instead most commands show transactions/postings/accounts which match
(or negatively match):
o any of the description terms AND
o any of the account terms AND
o any of the status terms AND
o all the other terms.
The print command instead shows transactions which:
o match any of the description terms AND
o have any postings matching any of the positive account terms AND
o have no postings matching any of the negative account terms AND
o match all the other terms.
The following kinds of search terms can be used. Remember these can
also be prefixed with not:, eg to exclude a particular subaccount.
REGEX match account names by this regular expression. (No prefix is
equivalent to acct:).
acct:REGEX
same as above
amt:N, amt:<N, amt:<=N, amt:>N, amt:>=N
match postings with a single-commodity amount that is equal to,
less than, or greater than N. (Multi-commodity amounts are not
tested, and will always match.) The comparison has two modes: if
N is preceded by a + or - sign (or is 0), the two signed numbers
are compared. Otherwise, the absolute magnitudes are compared,
ignoring sign.
code:REGEX
match by transaction code (eg check number)
cur:REGEX
match postings or transactions including any amounts whose cur-
rency/commodity symbol is fully matched by REGEX. (For a par-
tial match, use .*REGEX.*). Note, to match characters which are
regex-significant, like the dollar sign ($), you need to prepend
\. And when using the command line you need to add one more
level of quoting to hide it from the shell, so eg do:
hledger print cur:'\$' or hledger print cur:\\$.
desc:REGEX
match transaction descriptions.
date:PERIODEXPR
match dates within the specified period. PERIODEXPR is a period
expression (with no report interval). Examples: date:2016,
date:thismonth, date:2000/2/1-2/15, date:lastweek-. If the
--date2 command line flag is present, this matches secondary
dates instead.
date2:PERIODEXPR
match secondary dates within the specified period.
depth:N
match (or display, depending on command) accounts at or above
this depth
note:REGEX
match transaction notes (part of description right of |, or
whole description when there's no |)
payee:REGEX
match transaction payee/payer names (part of description left of
|, or whole description when there's no |)
real:, real:0
match real or virtual postings respectively
status:, status:!, status:*
match unmarked, pending, or cleared transactions respectively
tag:REGEX[=REGEX]
match by tag name, and optionally also by tag value. Note a
tag: query is considered to match a transaction if it matches
any of the postings. Also remember that postings inherit the
tags of their parent transaction.
The following special search term is used automatically in hledger-web,
only:
inacct:ACCTNAME
tells hledger-web to show the transaction register for this
account. Can be filtered further with acct etc.
Some of these can also be expressed as command-line options (eg depth:2
is equivalent to --depth 2). Generally you can mix options and query
arguments, and the resulting query will be their intersection (perhaps
excluding the -p/--period option).
COMMANDS
hledger provides a number of subcommands; hledger with no arguments
shows a list.
If you install additional hledger-* packages, or if you put programs or
scripts named hledger-NAME in your PATH, these will also be listed as
subcommands.
Run a subcommand by writing its name as first argument (eg
hledger incomestatement). You can also write one of the standard short
aliases displayed in parentheses in the command list (hledger b), or
any any unambiguous prefix of a command name (hledger inc).
Here are all the builtin commands in alphabetical order. See also
hledger for a more organised command list, and hledger CMD -h for
detailed command help.
accounts
Show account names. Alias: a.
--declared
show account names declared with account directives
--used show account names posted to by transactions
--tree show short account names and their parents, as a tree
--flat show full account names, as a list (default)
--drop=N
in flat mode: omit N leading account name parts
This command lists account names, either declared with account direc-
tives (-declared), posted to (-used), or both (default). With query
arguments, only matched account names and account names referenced by
matched postings are shown. It shows a flat list by default. With
--tree, it uses indentation to show the account hierarchy. In flat
mode you can add --drop N to omit the first few account name compo-
nents. Account names can be depth-clipped with --depth N or depth:N.
Examples:
$ hledger accounts --tree
assets
bank
checking
saving
cash
expenses
food
supplies
income
gifts
salary
liabilities
debts
$ hledger accounts --drop 1
bank:checking
bank:saving
cash
food
supplies
gifts
salary
debts
$ hledger accounts
assets:bank:checking
assets:bank:saving
assets:cash
expenses:food
expenses:supplies
income:gifts
income:salary
liabilities:debts
activity
Show an ascii barchart of posting counts per interval.
The activity command displays an ascii histogram showing transaction
counts by day, week, month or other reporting interval (by day is the
default). With query arguments, it counts only matched transactions.
$ hledger activity --quarterly
2008-01-01 **
2008-04-01 *******
2008-07-01
2008-10-01 **
add
Prompt for transactions and add them to the journal.
--no-new-accounts
don't allow creating new accounts; helps prevent typos when
entering account names
Many hledger users edit their journals directly with a text editor, or
generate them from CSV. For more interactive data entry, there is the
add command, which prompts interactively on the console for new trans-
actions, and appends them to the journal file (if there are multiple
-f FILE options, the first file is used.) Existing transactions are not
changed. This is the only hledger command that writes to the journal
file.
To use it, just run hledger add and follow the prompts. You can add as
many transactions as you like; when you are finished, enter . or press
control-d or control-c to exit.
Features:
o add tries to provide useful defaults, using the most similar recent
transaction (by description) as a template.
o You can also set the initial defaults with command line arguments.
o Readline-style edit keys can be used during data entry.
o The tab key will auto-complete whenever possible - accounts, descrip-
tions, dates (yesterday, today, tomorrow). If the input area is
empty, it will insert the default value.
o If the journal defines a default commodity, it will be added to any
bare numbers entered.
o A parenthesised transaction code may be entered following a date.
o Comments and tags may be entered following a description or amount.
o If you make a mistake, enter < at any prompt to restart the transac-
tion.
o Input prompts are displayed in a different colour when the terminal
supports it.
Example (see the tutorial for a detailed explanation):
$ hledger add
Adding transactions to journal file /src/hledger/examples/sample.journal
Any command line arguments will be used as defaults.
Use tab key to complete, readline keys to edit, enter to accept defaults.
An optional (CODE) may follow transaction dates.
An optional ; COMMENT may follow descriptions or amounts.
If you make a mistake, enter < at any prompt to restart the transaction.
To end a transaction, enter . when prompted.
To quit, enter . at a date prompt or press control-d or control-c.
Date [2015/05/22]:
Description: supermarket
Account 1: expenses:food
Amount 1: $10
Account 2: assets:checking
Amount 2 [$-10.0]:
Account 3 (or . or enter to finish this transaction): .
2015/05/22 supermarket
expenses:food $10
assets:checking $-10.0
Save this transaction to the journal ? [y]:
Saved.
Starting the next transaction (. or ctrl-D/ctrl-C to quit)
Date [2015/05/22]: <CTRL-D> $
balance
Show accounts and their balances. Aliases: b, bal.
--change
show balance change in each period (default)
--cumulative
show balance change accumulated across periods (in multicolumn
reports)
-H --historical
show historical ending balance in each period (includes postings
before report start date)
--tree show accounts as a tree; amounts include subaccounts (default in
simple reports)
--flat show accounts as a list; amounts exclude subaccounts except when
account is depth-clipped (default in multicolumn reports)
-A --average
show a row average column (in multicolumn mode)
-T --row-total
show a row total column (in multicolumn mode)
-N --no-total
don't show the final total row
--drop=N
omit N leading account name parts (in flat mode)
--no-elide
don't squash boring parent accounts (in tree mode)
--format=LINEFORMAT
in single-column balance reports: use this custom line format
-O FMT --output-format=FMT
select the output format. Supported formats: txt, csv, html.
-o FILE --output-file=FILE
write output to FILE. A file extension matching one of the
above formats selects that format.
--pretty-tables
use unicode to display prettier tables.
--sort-amount
sort by amount instead of account code/name (in flat mode).
With multiple columns, sorts by the row total, or by row average
if that is displayed.
--invert
display all amounts with reversed sign
--budget
show performance compared to budget goals defined by periodic
transactions
--show-unbudgeted
with -budget, show unbudgeted accounts also
The balance command displays accounts and balances. It is hledger's
most featureful and versatile command.
$ hledger balance
$-1 assets
$1 bank:saving
$-2 cash
$2 expenses
$1 food
$1 supplies
$-2 income
$-1 gifts
$-1 salary
$1 liabilities:debts
--------------------
0
More precisely, the balance command shows the change to each account's
balance caused by all (matched) postings. In the common case where you
do not filter by date and your journal sets the correct opening bal-
ances, this is the same as the account's ending balance.
By default, accounts are displayed hierarchically, with subaccounts
indented below their parent. At each level of the tree, accounts are
sorted by account code if any, then by account name. Or with
-S/--sort-amount, by their balance amount.
"Boring" accounts, which contain a single interesting subaccount and no
balance of their own, are elided into the following line for more com-
pact output. (Not yet supported in tabular reports.) Use --no-elide to
prevent this.
Account balances are "inclusive" - they include the balances of any
subaccounts.
Accounts which have zero balance (and no non-zero subaccounts) are
omitted. Use -E/--empty to show them.
A final total is displayed by default; use -N/--no-total to suppress
it:
$ hledger balance -p 2008/6 expenses --no-total
$2 expenses
$1 food
$1 supplies
Flat mode
To see a flat list of full account names instead of the default hierar-
chical display, use --flat. In this mode, accounts (unless
depth-clipped) show their "exclusive" balance, excluding any subaccount
balances. In this mode, you can also use --drop N to omit the first
few account name components.
$ hledger balance -p 2008/6 expenses -N --flat --drop 1
$1 food
$1 supplies
Depth limited balance reports
With --depth N, balance shows accounts only to the specified depth.
This is very useful to show a complex charts of accounts in less
detail. In flat mode, balances from accounts below the depth limit
will be shown as part of a parent account at the depth limit.
$ hledger balance -N --depth 1
$-1 assets
$2 expenses
$-2 income
$1 liabilities
Multicolumn balance reports
With a reporting interval, multiple balance columns will be shown, one
for each report period. There are three types of multi-column balance
report, showing different information:
1. By default: each column shows the sum of postings in that period, ie
the account's change of balance in that period. This is useful eg
for a monthly income statement:
$ hledger balance --quarterly income expenses -E
Balance changes in 2008:
|| 2008q1 2008q2 2008q3 2008q4
===================++=================================
expenses:food || 0 $1 0 0
expenses:supplies || 0 $1 0 0
income:gifts || 0 $-1 0 0
income:salary || $-1 0 0 0
-------------------++---------------------------------
|| $-1 $1 0 0
2. With --cumulative: each column shows the ending balance for that
period, accumulating the changes across periods, starting from 0 at
the report start date:
$ hledger balance --quarterly income expenses -E --cumulative
Ending balances (cumulative) in 2008:
|| 2008/03/31 2008/06/30 2008/09/30 2008/12/31
===================++=================================================
expenses:food || 0 $1 $1 $1
expenses:supplies || 0 $1 $1 $1
income:gifts || 0 $-1 $-1 $-1
income:salary || $-1 $-1 $-1 $-1
-------------------++-------------------------------------------------
|| $-1 0 0 0
3. With --historical/-H: each column shows the actual historical ending
balance for that period, accumulating the changes across periods,
starting from the actual balance at the report start date. This is
useful eg for a multi-period balance sheet, and when you are showing
only the data after a certain start date:
$ hledger balance ^assets ^liabilities --quarterly --historical --begin 2008/4/1
Ending balances (historical) in 2008/04/01-2008/12/31:
|| 2008/06/30 2008/09/30 2008/12/31
======================++=====================================
assets:bank:checking || $1 $1 0
assets:bank:saving || $1 $1 $1
assets:cash || $-2 $-2 $-2
liabilities:debts || 0 0 $1
----------------------++-------------------------------------
|| 0 0 0
Multi-column balance reports display accounts in flat mode by default;
to see the hierarchy, use --tree.
With a reporting interval (like --quarterly above), the report
start/end dates will be adjusted if necessary so that they encompass
the displayed report periods. This is so that the first and last peri-
ods will be "full" and comparable to the others.
The -E/--empty flag does two things in multicolumn balance reports:
first, the report will show all columns within the specified report
period (without -E, leading and trailing columns with all zeroes are
not shown). Second, all accounts which existed at the report start
date will be considered, not just the ones with activity during the
report period (use -E to include low-activity accounts which would oth-
erwise would be omitted).
The -T/--row-total flag adds an additional column showing the total for
each row.
The -A/--average flag adds a column showing the average value in each
row.
Here's an example of all three:
$ hledger balance -Q income expenses --tree -ETA
Balance changes in 2008:
|| 2008q1 2008q2 2008q3 2008q4 Total Average
============++===================================================
expenses || 0 $2 0 0 $2 $1
food || 0 $1 0 0 $1 0
supplies || 0 $1 0 0 $1 0
income || $-1 $-1 0 0 $-2 $-1
gifts || 0 $-1 0 0 $-1 0
salary || $-1 0 0 0 $-1 0
------------++---------------------------------------------------
|| $-1 $1 0 0 0 0
# Average is rounded to the dollar here since all journal amounts are
Budgets
With --budget and a report interval, all periodic transactions in your
journal with that interval, active during the requested report period,
are interpreted as recurring budget goals for the specified accounts
(and subaccounts), and the report will show the difference between
actual and budgeted balances.
For example, you can take average monthly expenses in the common
expense categories to construct a minimal monthly budget:
;; Budget
~ monthly
income $2000
expenses:food $400
expenses:bus $50
expenses:movies $30
assets:bank:checking
;; Two months worth of expenses
2017-11-01
income $1950
expenses:food $396
expenses:bus $49
expenses:movies $30
expenses:supplies $20
assets:bank:checking
2017-12-01
income $2100
expenses:food $412
expenses:bus $53
expenses:gifts $100
assets:bank:checking
You can now see a monthly budget performance report:
$ hledger balance -M --budget
Balance changes in 2017/11/01-2017/12/31:
|| 2017/11 2017/12
=======================++=================================================
<unbudgeted>:expenses || $20 $100
assets:bank:checking || $-2445 [99% of $-2480] $-2665 [107% of $-2480]
expenses:bus || $49 [98% of $50] $53 [106% of $50]
expenses:food || $396 [99% of $400] $412 [103% of $400]
expenses:movies || $30 [100% of $30] 0 [0% of $30]
income || $1950 [98% of $2000] $2100 [105% of $2000]
-----------------------++-------------------------------------------------
|| 0 0
You can roll over unspent budgets to next period with --cumulative:
$ hledger balance -M --budget --cumulative
Ending balances (cumulative) in 2017/11/01-2017/12/31:
|| 2017/11/30 2017/12/31
=======================++=================================================
<unbudgeted>:expenses || $20 $120
assets:bank:checking || $-2445 [99% of $-2480] $-5110 [103% of $-4960]
expenses:bus || $49 [98% of $50] $102 [102% of $100]
expenses:food || $396 [99% of $400] $808 [101% of $800]
expenses:movies || $30 [100% of $30] $30 [50% of $60]
income || $1950 [98% of $2000] $4050 [101% of $4000]
-----------------------++-------------------------------------------------
|| 0 0
Accounts with no budget goals (not mentioned in the periodic transac-
tions) will be aggregated under <unbudgeted>, unless you add the
--show-unbudgeted flag to display them normally:
$ hledger balance --budget --show-unbudgeted
Balance changes in 2017/11/01-2017/12/31:
|| 2017/11 2017/12
======================++=================================================
assets:bank:checking || $-2445 [99% of $-2480] $-2665 [107% of $-2480]
expenses:bus || $49 [98% of $50] $53 [106% of $50]
expenses:food || $396 [99% of $400] $412 [103% of $400]
expenses:gifts || 0 $100
expenses:movies || $30 [100% of $30] 0 [0% of $30]
expenses:supplies || $20 0
income || $1950 [98% of $2000] $2100 [105% of $2000]
----------------------++-------------------------------------------------
|| 0 0
Note -budget first arrived in hledger in 1.5 and is still pretty young;
join the discussions on mail list and issue tracker to help us refine
it.
For more examples, see Budgeting and Forecasting.
Custom balance output
You can customise the layout of simple (non-tabular) balance reports
with --format FMT:
$ hledger balance --format "%20(account) %12(total)"
assets $-1
bank:saving $1
cash $-2
expenses $2
food $1
supplies $1
income $-2
gifts $-1
salary $-1
liabilities:debts $1
---------------------------------
0
The FMT format string (plus a newline) specifies the formatting applied
to each account/balance pair. It may contain any suitable text, with
data fields interpolated like so:
%[MIN][.MAX](FIELDNAME)
o MIN pads with spaces to at least this width (optional)
o MAX truncates at this width (optional)
o FIELDNAME must be enclosed in parentheses, and can be one of:
o depth_spacer - a number of spaces equal to the account's depth, or
if MIN is specified, MIN * depth spaces.
o account - the account's name
o total - the account's balance/posted total, right justified
Also, FMT can begin with an optional prefix to control how multi-com-
modity amounts are rendered:
o %_ - render on multiple lines, bottom-aligned (the default)
o %^ - render on multiple lines, top-aligned
o %, - render on one line, comma-separated
There are some quirks. Eg in one-line mode, %(depth_spacer) has no
effect, instead %(account) has indentation built in.
Experimentation may be needed to get pleasing results.
Some example formats:
o %(total) - the account's total
o %-20.20(account) - the account's name, left justified, padded to 20
characters and clipped at 20 characters
o %,%-50(account) %25(total) - account name padded to 50 characters,
total padded to 20 characters, with multiple commodities rendered on
one line
o %20(total) %2(depth_spacer)%-(account) - the default format for the
single-column balance report
This command also supports output destination and output format selec-
tion.
Colour support
The balance command shows negative amounts in red, if:
o the TERM environment variable is not set to dumb
o the output is not being redirected or piped anywhere
balancesheet
This command displays a simple balance sheet, showing historical ending
balances of asset and liability accounts (ignoring any report begin
date). It assumes that these accounts are under a top-level asset or
liability account (case insensitive, plural forms also allowed). Note
this report shows all account balances with normal positive sign (like
conventional financial statements, unlike balance/print/register)
(experimental). (bs)
--change
show balance change in each period, instead of historical ending
balances
--cumulative
show balance change accumulated across periods (in multicolumn
reports), instead of historical ending balances
-H --historical
show historical ending balance in each period (includes postings
before report start date) (default)
--tree show accounts as a tree; amounts include subaccounts (default in
simple reports)
--flat show accounts as a list; amounts exclude subaccounts except when
account is depth-clipped (default in multicolumn reports)
-A --average
show a row average column (in multicolumn mode)
-T --row-total
show a row total column (in multicolumn mode)
-N --no-total
don't show the final total row
--drop=N
omit N leading account name parts (in flat mode)
--no-elide
don't squash boring parent accounts (in tree mode)
--format=LINEFORMAT
in single-column balance reports: use this custom line format
--sort-amount
sort by amount instead of account code/name
Example:
$ hledger balancesheet
Balance Sheet
Assets:
$-1 assets
$1 bank:saving
$-2 cash
--------------------
$-1
Liabilities:
$1 liabilities:debts
--------------------
$1
Total:
--------------------
0
With a reporting interval, multiple columns will be shown, one for each
report period. As with multicolumn balance reports, you can alter the
report mode with --change/--cumulative/--historical. Normally bal-
ancesheet shows historical ending balances, which is what you need for
a balance sheet; note this means it ignores report begin dates.
This command also supports output destination and output format selec-
tion.
balancesheetequity
Just like balancesheet, but also reports Equity (which it assumes is
under a top-level equity account).
Example:
$ hledger balancesheetequity
Balance Sheet With Equity
Assets:
$-2 assets
$1 bank:saving
$-3 cash
--------------------
$-2
Liabilities:
$1 liabilities:debts
--------------------
$1
Equity:
$1 equity:owner
--------------------
$1
Total:
--------------------
0
cashflow
This command displays a simple cashflow statement, showing changes in
"cash" accounts. It assumes that these accounts are under a top-level
asset account (case insensitive, plural forms also allowed) and do not
contain receivable or A/R in their name. Note this report shows all
account balances with normal positive sign (like conventional financial
statements, unlike balance/print/register) (experimental). (cf)
--change
show balance change in each period (default)
--cumulative
show balance change accumulated across periods (in multicolumn
reports), instead of changes during periods
-H --historical
show historical ending balance in each period (includes postings
before report start date), instead of changes during each period
--tree show accounts as a tree; amounts include subaccounts (default in
simple reports)
--flat show accounts as a list; amounts exclude subaccounts except when
account is depth-clipped (default in multicolumn reports)
-A --average
show a row average column (in multicolumn mode)
-T --row-total
show a row total column (in multicolumn mode)
-N --no-total
don't show the final total row (in simple reports)
--drop=N
omit N leading account name parts (in flat mode)
--no-elide
don't squash boring parent accounts (in tree mode)
--format=LINEFORMAT
in single-column balance reports: use this custom line format
--sort-amount
sort by amount instead of account code/name
Example:
$ hledger cashflow
Cashflow Statement
Cash flows:
$-1 assets
$1 bank:saving
$-2 cash
--------------------
$-1
Total:
--------------------
$-1
With a reporting interval, multiple columns will be shown, one for each
report period. Normally cashflow shows changes in assets per period,
though as with multicolumn balance reports you can alter the report
mode with --change/--cumulative/--historical.
This command also supports output destination and output format selec-
tion.
check-dates
Check that transactions are sorted by increasing date. With a query,
only matched transactions' dates are checked.
check-dupes
Report account names having the same leaf but different prefixes. An
example: http://stefanorodighiero.net/software/hledger-dupes.html
close
Print closing/opening transactions that bring some or all account bal-
ances to zero and back. Can be useful for bringing asset/liability
balances across file boundaries, or for closing out income/expenses for
a period. This was formerly called "equity", as in Ledger, and that
alias is also accepted. See close -help for more.
help
Show any of the hledger manuals.
The help command displays any of the main hledger manuals, in one of
several ways. Run it with no argument to list the manuals, or provide
a full or partial manual name to select one.
hledger manuals are available in several formats. hledger help will
use the first of these display methods that it finds: info, man,
$PAGER, less, stdout (or when non-interactive, just stdout). You can
force a particular viewer with the --info, --man, --pager, --cat flags.
$ hledger help
Please choose a manual by typing "hledger help MANUAL" (a substring is ok).
Manuals: hledger hledger-ui hledger-web hledger-api journal csv timeclock timedot
$ hledger help h --man
hledger(1) hledger User Manuals hledger(1)
NAME
hledger - a command-line accounting tool
SYNOPSIS
hledger [-f FILE] COMMAND [OPTIONS] [ARGS]
hledger [-f FILE] ADDONCMD -- [OPTIONS] [ARGS]
hledger
DESCRIPTION
hledger is a cross-platform program for tracking money, time, or any
...
import
Read new transactions added to each FILE since last run, and add them
to the main journal file.
--dry-run
just show the transactions to be imported
The input files are specified as arguments - no need to write -f before
each one. So eg to add new transactions from all CSV files to the main
journal, it's just: hledger import *.csv
New transactions are detected in the same way as print -new: by assum-
ing transactions are always added to the input files in increasing date
order, and by saving .latest.FILE state files.
The -dry-run output is in journal format, so you can filter it, eg to
see only uncategorised transactions:
$ hledger import --dry ... | hledger -f- print unknown --ignore-assertions
incomestatement
This command displays a simple income statement, showing revenues and
expenses during a period. It assumes that these accounts are under a
top-level revenue or income or expense account (case insensitive, plu-
ral forms also allowed). Note this report shows all account balances
with normal positive sign (like conventional financial statements,
unlike balance/print/register) (experimental). (is)
--change
show balance change in each period (default)
--cumulative
show balance change accumulated across periods (in multicolumn
reports), instead of changes during periods
-H --historical
show historical ending balance in each period (includes postings
before report start date), instead of changes during each period
--tree show accounts as a tree; amounts include subaccounts (default in
simple reports)
--flat show accounts as a list; amounts exclude subaccounts except when
account is depth-clipped (default in multicolumn reports)
-A --average
show a row average column (in multicolumn mode)
-T --row-total
show a row total column (in multicolumn mode)
-N --no-total
don't show the final total row
--drop=N
omit N leading account name parts (in flat mode)
--no-elide
don't squash boring parent accounts (in tree mode)
--format=LINEFORMAT
in single-column balance reports: use this custom line format
--sort-amount
sort by amount instead of account code/name
This command displays a simple income statement. It currently assumes
that you have top-level accounts named income (or revenue) and expense
(plural forms also allowed.)
$ hledger incomestatement
Income Statement
Revenues:
$-2 income
$-1 gifts
$-1 salary
--------------------
$-2
Expenses:
$2 expenses
$1 food
$1 supplies
--------------------
$2
Total:
--------------------
0
With a reporting interval, multiple columns will be shown, one for each
report period. Normally incomestatement shows revenues/expenses per
period, though as with multicolumn balance reports you can alter the
report mode with --change/--cumulative/--historical.
This command also supports output destination and output format selec-
tion.
prices
Print all market prices from the journal.
print
Show transactions from the journal. Aliases: p, txns.
-m STR --match=STR
show the transaction whose description is most similar to STR,
and is most recent
--new show only newer-dated transactions added in each file since last
run
-x --explicit
show all amounts explicitly
-O FMT --output-format=FMT
select the output format. Supported formats: txt, csv.
-o FILE --output-file=FILE
write output to FILE. A file extension matching one of the
above formats selects that format.
$ hledger print
2008/01/01 income
assets:bank:checking $1
income:salary $-1
2008/06/01 gift
assets:bank:checking $1
income:gifts $-1
2008/06/02 save
assets:bank:saving $1
assets:bank:checking $-1
2008/06/03 * eat & shop
expenses:food $1
expenses:supplies $1
assets:cash $-2
2008/12/31 * pay off
liabilities:debts $1
assets:bank:checking $-1
The print command displays full journal entries (transactions) from the
journal file in date order, tidily formatted. print's output is always
a valid hledger journal. It preserves all transaction information, but
it does not preserve directives or inter-transaction comments
Normally, the journal entry's explicit or implicit amount style is pre-
served. Ie when an amount is omitted in the journal, it will be omit-
ted in the output. You can use the -x/--explicit flag to make all
amounts explicit, which can be useful for troubleshooting or for making
your journal more readable and robust against data entry errors. Note,
-x will cause postings with a multi-commodity amount (these can arise
when a multi-commodity transaction has an implicit amount) will be
split into multiple single-commodity postings, for valid journal out-
put.
With -B/--cost, amounts with transaction prices are converted to cost
using that price. This can be used for troubleshooting.
With -m/--match and a STR argument, print will show at most one trans-
action: the one one whose description is most similar to STR, and is
most recent. STR should contain at least two characters. If there is
no similar-enough match, no transaction will be shown.
With --new, for each FILE being read, hledger reads (and writes) a spe-
cial state file (.latest.FILE in the same directory), containing the
latest transaction date(s) that were seen last time FILE was read.
When this file is found, only transactions with newer dates (and new
transactions on the latest date) are printed. This is useful for
ignoring already-seen entries in import data, such as downloaded CSV
files. Eg:
$ hledger -f bank1.csv print --new
# shows transactions added since last print --new on this file
This assumes that transactions added to FILE always have same or
increasing dates, and that transactions on the same day do not get
reordered. See also the import command.
This command also supports output destination and output format selec-
tion. Here's an example of print's CSV output:
$ hledger print -Ocsv
"txnidx","date","date2","status","code","description","comment","account","amount","commodity","credit","debit","posting-status","posting-comment"
"1","2008/01/01","","","","income","","assets:bank:checking","1","$","","1","",""
"1","2008/01/01","","","","income","","income:salary","-1","$","1","","",""
"2","2008/06/01","","","","gift","","assets:bank:checking","1","$","","1","",""
"2","2008/06/01","","","","gift","","income:gifts","-1","$","1","","",""
"3","2008/06/02","","","","save","","assets:bank:saving","1","$","","1","",""
"3","2008/06/02","","","","save","","assets:bank:checking","-1","$","1","","",""
"4","2008/06/03","","*","","eat & shop","","expenses:food","1","$","","1","",""
"4","2008/06/03","","*","","eat & shop","","expenses:supplies","1","$","","1","",""
"4","2008/06/03","","*","","eat & shop","","assets:cash","-2","$","2","","",""
"5","2008/12/31","","*","","pay off","","liabilities:debts","1","$","","1","",""
"5","2008/12/31","","*","","pay off","","assets:bank:checking","-1","$","1","","",""
o There is one CSV record per posting, with the parent transaction's
fields repeated.
o The "txnidx" (transaction index) field shows which postings belong to
the same transaction. (This number might change if transactions are
reordered within the file, files are parsed/included in a different
order, etc.)
o The amount is separated into "commodity" (the symbol) and "amount"
(numeric quantity) fields.
o The numeric amount is repeated in either the "credit" or "debit" col-
umn, for convenience. (Those names are not accurate in the account-
ing sense; it just puts negative amounts under credit and zero or
greater amounts under debit.)
print-unique
Print transactions which do not reuse an already-seen description.
register
Show postings and their running total. Aliases: r, reg.
--cumulative
show running total from report start date (default)
-H --historical
show historical running total/balance (includes postings before
report start date)
-A --average
show running average of posting amounts instead of total
(implies -empty)
-r --related
show postings' siblings instead
-w N --width=N
set output width (default: terminal width or COLUMNS. -wN,M
sets description width as well)
-O FMT --output-format=FMT
select the output format. Supported formats: txt, csv.
-o FILE --output-file=FILE
write output to FILE. A file extension matching one of the
above formats selects that format.
The register command displays postings, one per line, and their running
total. This is typically used with a query selecting a particular
account, to see that account's activity:
$ hledger register checking
2008/01/01 income assets:bank:checking $1 $1
2008/06/01 gift assets:bank:checking $1 $2
2008/06/02 save assets:bank:checking $-1 $1
2008/12/31 pay off assets:bank:checking $-1 0
The --historical/-H flag adds the balance from any undisplayed prior
postings to the running total. This is useful when you want to see
only recent activity, with a historically accurate running balance:
$ hledger register checking -b 2008/6 --historical
2008/06/01 gift assets:bank:checking $1 $2
2008/06/02 save assets:bank:checking $-1 $1
2008/12/31 pay off assets:bank:checking $-1 0
The --depth option limits the amount of sub-account detail displayed.
The --average/-A flag shows the running average posting amount instead
of the running total (so, the final number displayed is the average for
the whole report period). This flag implies --empty (see below). It
is affected by --historical. It works best when showing just one
account and one commodity.
The --related/-r flag shows the other postings in the transactions of
the postings which would normally be shown.
With a reporting interval, register shows summary postings, one per
interval, aggregating the postings to each account:
$ hledger register --monthly income
2008/01 income:salary $-1 $-1
2008/06 income:gifts $-1 $-2
Periods with no activity, and summary postings with a zero amount, are
not shown by default; use the --empty/-E flag to see them:
$ hledger register --monthly income -E
2008/01 income:salary $-1 $-1
2008/02 0 $-1
2008/03 0 $-1
2008/04 0 $-1
2008/05 0 $-1
2008/06 income:gifts $-1 $-2
2008/07 0 $-2
2008/08 0 $-2
2008/09 0 $-2
2008/10 0 $-2
2008/11 0 $-2
2008/12 0 $-2
Often, you'll want to see just one line per interval. The --depth
option helps with this, causing subaccounts to be aggregated:
$ hledger register --monthly assets --depth 1h
2008/01 assets $1 $1
2008/06 assets $-1 0
2008/12 assets $-1 $-1
Note when using report intervals, if you specify start/end dates these
will be adjusted outward if necessary to contain a whole number of
intervals. This ensures that the first and last intervals are full
length and comparable to the others in the report.
Custom register output
register uses the full terminal width by default, except on windows.
You can override this by setting the COLUMNS environment variable (not
a bash shell variable) or by using the --width/-w option.
The description and account columns normally share the space equally
(about half of (width - 40) each). You can adjust this by adding a
description width as part of -width's argument, comma-separated:
--width W,D . Here's a diagram:
<--------------------------------- width (W) ---------------------------------->
date (10) description (D) account (W-41-D) amount (12) balance (12)
DDDDDDDDDD dddddddddddddddddddd aaaaaaaaaaaaaaaaaaa AAAAAAAAAAAA AAAAAAAAAAAA
and some examples:
$ hledger reg # use terminal width (or 80 on windows)
$ hledger reg -w 100 # use width 100
$ COLUMNS=100 hledger reg # set with one-time environment variable
$ export COLUMNS=100; hledger reg # set till session end (or window resize)
$ hledger reg -w 100,40 # set overall width 100, description width 40
$ hledger reg -w $COLUMNS,40 # use terminal width, and set description width
This command also supports output destination and output format selec-
tion.
register-match
Print the one posting whose transaction description is closest to DESC,
in the style of the register command. Helps ledger-autosync detect
already-seen transactions when importing.
rewrite
Print all transactions, adding custom postings to the matched ones.
stats
Show some journal statistics.
-o FILE --output-file=FILE
write output to FILE. A file extension matching one of the
above formats selects that format.
$ hledger stats
Main journal file : /src/hledger/examples/sample.journal
Included journal files :
Transactions span : 2008-01-01 to 2009-01-01 (366 days)
Last transaction : 2008-12-31 (2333 days ago)
Transactions : 5 (0.0 per day)
Transactions last 30 days: 0 (0.0 per day)
Transactions last 7 days : 0 (0.0 per day)
Payees/descriptions : 5
Accounts : 8 (depth 3)
Commodities : 1 ($)
The stats command displays summary information for the whole journal,
or a matched part of it. With a reporting interval, it shows a report
for each report period.
This command also supports output destination and output format selec-
tion.
tags
List all the tag names used in the journal. With a TAGREGEX argument,
only tag names matching the regular expression (case insensitive) are
shown. With additional QUERY arguments, only transactions matching the
query are considered.
test
Run built-in unit tests.
$ hledger test
Cases: 74 Tried: 74 Errors: 0 Failures: 0
This command runs hledger's built-in unit tests and displays a quick
report. With a regular expression argument, it selects only tests with
matching names. It's mainly used in development, but it's also nice to
be able to check your hledger executable for smoke at any time.
ADD-ON COMMANDS
hledger also searches for external add-on commands, and will include
these in the commands list. These are programs or scripts in your PATH
whose name starts with hledger- and ends with a recognised file exten-
sion (currently: no extension, bat,com,exe, hs,lhs,pl,py,rb,rkt,sh).
Add-ons can be invoked like any hledger command, but there are a few
things to be aware of. Eg if the hledger-web add-on is installed,
o hledger -h web shows hledger's help, while hledger web -h shows
hledger-web's help.
o Flags specific to the add-on must have a preceding -- to hide them
from hledger. So hledger web --serve --port 9000 will be rejected;
you must use hledger web -- --serve --port 9000.
o You can always run add-ons directly if preferred:
hledger-web --serve --port 9000.
Add-ons are a relatively easy way to add local features or experiment
with new ideas. They can be written in any language, but haskell
scripts have a big advantage: they can use the same hledger (and
haskell) library functions that built-in commands do, for command-line
options, journal parsing, reporting, etc.
Here are some hledger add-ons available:
Official add-ons
These are maintained and released along with hledger.
api
hledger-api serves hledger data as a JSON web API.
ui
hledger-ui provides an efficient curses-style interface.
web
hledger-web provides a simple web interface.
Third party add-ons
These are maintained separately, and usually updated shortly after a
hledger release.
diff
hledger-diff shows differences in an account's transactions between one
journal file and another.
iadd
hledger-iadd is a curses-style, more interactive replacement for the
add command.
interest
hledger-interest generates interest transactions for an account accord-
ing to various schemes.
irr
hledger-irr calculates the internal rate of return of an investment
account.
Experimental add-ons
These are available in source form in the hledger repo's bin/ direc-
tory; installing them is pretty easy. They may be less mature and doc-
umented than built-in commands. Reading and tweaking these is a good
way to start making your own!
autosync
hledger-autosync is a symbolic link for easily running ledger-autosync,
if installed. ledger-autosync does deduplicating conversion of OFX
data and some CSV formats, and can also download the data if your bank
offers OFX Direct Connect.
chart
hledger-chart.hs is an old pie chart generator, in need of some love.
check
hledger-check.hs checks more powerful account balance assertions.
ENVIRONMENT
COLUMNS The screen width used by the register command. Default: the
full terminal width.
LEDGER_FILE The journal file path when not specified with -f. Default:
~/.hledger.journal (on windows, perhaps C:/Users/USER/.hledger.jour-
nal).
FILES
Reads data from one or more files in hledger journal, timeclock, time-
dot, or CSV format specified with -f, or $LEDGER_FILE, or
$HOME/.hledger.journal (on windows, perhaps
C:/Users/USER/.hledger.journal).
BUGS
The need to precede addon command options with -- when invoked from
hledger is awkward.
When input data contains non-ascii characters, a suitable system locale
must be configured (or there will be an unhelpful error). Eg on POSIX,
set LANG to something other than C.
In a Microsoft Windows CMD window, non-ascii characters and colours are
not supported.
In a Cygwin/MSYS/Mintty window, the tab key is not supported in hledger
add.
Not all of Ledger's journal file syntax is supported. See file format
differences.
On large data files, hledger is slower and uses more memory than
Ledger.
TROUBLESHOOTING
Here are some issues you might encounter when you run hledger (and
remember you can also seek help from the IRC channel, mail list or bug
tracker):
Successfully installed, but "No command `hledger' found"
stack and cabal install binaries into a special directory, which should
be added to your PATH environment variable. Eg on unix-like systems,
that is ~/.local/bin and ~/.cabal/bin respectively.
I set a custom LEDGER_FILE, but hledger is still using the default file
LEDGER_FILE should be a real environment variable, not just a shell
variable. The command env | grep LEDGER_FILE should show it. You may
need to use export. Here's an explanation.
"Illegal byte sequence" or "Invalid or incomplete multibyte or wide
character" errors
In order to handle non-ascii letters and symbols (like ), hledger needs
an appropriate locale. This is usually configured system-wide; you can
also configure it temporarily. The locale may need to be one that sup-
ports UTF-8, if you built hledger with GHC < 7.2 (or possibly always,
I'm not sure yet).
Here's an example of setting the locale temporarily, on ubuntu
gnu/linux:
$ file my.journal
my.journal: UTF-8 Unicode text # <- the file is UTF8-encoded
$ locale -a
C
en_US.utf8 # <- a UTF8-aware locale is available
POSIX
$ LANG=en_US.utf8 hledger -f my.journal print # <- use it for this command
Here's one way to set it permanently, there are probably better ways:
$ echo "export LANG=en_US.UTF-8" >>~/.bash_profile
$ bash --login
If we preferred to use eg fr_FR.utf8, we might have to install that
first:
$ apt-get install language-pack-fr
$ locale -a
C
en_US.utf8
fr_BE.utf8
fr_CA.utf8
fr_CH.utf8
fr_FR.utf8
fr_LU.utf8
POSIX
$ LANG=fr_FR.utf8 hledger -f my.journal print
Note some platforms allow variant locale spellings, but not all (ubuntu
accepts fr_FR.UTF8, mac osx requires exactly fr_FR.UTF-8).
REPORTING BUGS
Report bugs at http://bugs.hledger.org (or on the #hledger IRC channel
or hledger mail list)
AUTHORS
Simon Michael <simon@joyful.com> and contributors
COPYRIGHT
Copyright (C) 2007-2016 Simon Michael.
Released under GNU GPL v3 or later.
SEE ALSO
hledger(1), hledger-ui(1), hledger-web(1), hledger-api(1),
hledger_csv(5), hledger_journal(5), hledger_timeclock(5), hledger_time-
dot(5), ledger(1)
http://hledger.org
hledger 1.9 March 2018 hledger(1)