hledger-1.5: hledger.info
This is hledger.info, produced by makeinfo version 6.5 from stdin.
File: hledger.info, Node: Top, Next: EXAMPLES, Up: (dir)
hledger(1) hledger 1.5
**********************
This is hledger's command-line interface (there are also curses and web
interfaces). Its basic function is to read a plain text file describing
financial transactions (in accounting terms, a general journal) and
print useful reports on standard output, or export them as CSV. hledger
can also read some other file formats such as CSV files, translating
them to journal format. Additionally, hledger lists other hledger-*
executables found in the user's $PATH and can invoke them as
subcommands.
hledger reads data from one or more files in hledger journal,
timeclock, timedot, or CSV format specified with '-f', or
'$LEDGER_FILE', or '$HOME/.hledger.journal' (on windows, perhaps
'C:/Users/USER/.hledger.journal'). If using '$LEDGER_FILE', note this
must be a real environment variable, not a shell variable. You can
specify standard input with '-f-'.
Transactions are dated movements of money between two (or more) named
accounts, and are recorded with journal entries like this:
2015/10/16 bought food
expenses:food $10
assets:cash
For more about this format, see hledger_journal(5).
Most users use a text editor to edit the journal, usually with an
editor mode such as ledger-mode for added convenience. hledger's
interactive add command is another way to record new transactions.
hledger never changes existing transactions.
To get started, you can either save some entries like the above in
'~/.hledger.journal', or run 'hledger add' and follow the prompts. Then
try some commands like 'hledger print' or 'hledger balance'. Run
'hledger' with no arguments for a list of commands.
* Menu:
* EXAMPLES::
* OPTIONS::
* QUERIES::
* COMMANDS::
* ADD-ON COMMANDS::
File: hledger.info, Node: EXAMPLES, Next: OPTIONS, Prev: Top, Up: Top
1 EXAMPLES
**********
Two simple transactions in hledger journal format:
2015/9/30 gift received
assets:cash $20
income:gifts
2015/10/16 farmers market
expenses:food $10
assets:cash
Some basic reports:
$ hledger print
2015/09/30 gift received
assets:cash $20
income:gifts $-20
2015/10/16 farmers market
expenses:food $10
assets:cash $-10
$ hledger accounts --tree
assets
cash
expenses
food
income
gifts
$ hledger balance
$10 assets:cash
$10 expenses:food
$-20 income:gifts
--------------------
0
$ hledger register cash
2015/09/30 gift received assets:cash $20 $20
2015/10/16 farmers market assets:cash $-10 $10
More commands:
$ hledger # show available commands
$ hledger add # add more transactions to the journal file
$ hledger balance # all accounts with aggregated balances
$ hledger balance --help # show detailed help for balance command
$ hledger balance --depth 1 # only top-level accounts
$ hledger register # show account postings, with running total
$ hledger reg income # show postings to/from income accounts
$ hledger reg 'assets:some bank:checking' # show postings to/from this checking account
$ hledger print desc:shop # show transactions with shop in the description
$ hledger activity -W # show transaction counts per week as a bar chart
File: hledger.info, Node: OPTIONS, Next: QUERIES, Prev: EXAMPLES, Up: Top
2 OPTIONS
*********
* Menu:
* General options::
* Command options::
* Command arguments::
* Argument files::
* Special characters::
* Input files::
* Smart dates::
* Report start & end date::
* Report intervals::
* Period expressions::
* Depth limiting::
* Pivoting::
* Cost::
* Market value::
* Combining -B and -V::
* Regular expressions::
File: hledger.info, Node: General options, Next: Command options, Up: OPTIONS
2.1 General options
===================
To see general usage help, including general options which are supported
by most hledger commands, run 'hledger -h'.
General help options:
'-h --help'
show general usage (or after COMMAND, command usage)
'--version'
show version
'--debug[=N]'
show debug output (levels 1-9, default: 1)
General input options:
'-f FILE --file=FILE'
use a different input file. For stdin, use - (default:
'$LEDGER_FILE' or '$HOME/.hledger.journal')
'--rules-file=RULESFILE'
Conversion rules file to use when reading CSV (default: FILE.rules)
'--alias=OLD=NEW'
rename accounts named OLD to NEW
'--anon'
anonymize accounts and payees
'--pivot FIELDNAME'
use some other field or tag for the account name
'-I --ignore-assertions'
ignore any failing balance assertions
General reporting options:
'-b --begin=DATE'
include postings/txns on or after this date
'-e --end=DATE'
include postings/txns before this date
'-D --daily'
multiperiod/multicolumn report by day
'-W --weekly'
multiperiod/multicolumn report by week
'-M --monthly'
multiperiod/multicolumn report by month
'-Q --quarterly'
multiperiod/multicolumn report by quarter
'-Y --yearly'
multiperiod/multicolumn report by year
'-p --period=PERIODEXP'
set start date, end date, and/or reporting interval all at once
using period expressions syntax (overrides the flags above)
'--date2'
match the secondary date instead (see command help for other
effects)
'-U --unmarked'
include only unmarked postings/txns (can combine with -P or -C)
'-P --pending'
include only pending postings/txns
'-C --cleared'
include only cleared postings/txns
'-R --real'
include only non-virtual postings
'-NUM --depth=NUM'
hide/aggregate accounts or postings more than NUM levels deep
'-E --empty'
show items with zero amount, normally hidden
'-B --cost'
convert amounts to their cost at transaction time (using the
transaction price, if any)
'-V --value'
convert amounts to their market value on the report end date (using
the most recent applicable market price, if any)
'--auto'
apply automated posting rules to modify transactions.
'--forecast'
apply periodic transaction rules to generate future transactions,
to 6 months from now or report end date.
When a reporting option appears more than once in the command line,
the last one takes precedence.
Some reporting options can also be written as query arguments.
File: hledger.info, Node: Command options, Next: Command arguments, Prev: General options, Up: OPTIONS
2.2 Command options
===================
To see options for a particular command, including command-specific
options, run: 'hledger COMMAND -h'.
Command-specific options must be written after the command name, eg:
'hledger print -x'.
Additionally, if the command is an addon, you may need to put its
options after a double-hyphen, eg: 'hledger ui -- --watch'. Or, you can
run the addon executable directly: 'hledger-ui --watch'.
File: hledger.info, Node: Command arguments, Next: Argument files, Prev: Command options, Up: OPTIONS
2.3 Command arguments
=====================
Most hledger commands accept arguments after the command name, which are
often a query, filtering the data in some way.
File: hledger.info, Node: Argument files, Next: Special characters, Prev: Command arguments, Up: OPTIONS
2.4 Argument files
==================
You can save a set of command line options/arguments in a file, one per
line, and then reuse them by writing '@FILENAME' in a command line. To
prevent this expansion of '@'-arguments, precede them with a '--'
argument. For more, see Save frequently used options.
File: hledger.info, Node: Special characters, Next: Input files, Prev: Argument files, Up: OPTIONS
2.5 Special characters
======================
Option and argument values which contain problematic characters should
be escaped with double quotes, backslashes, or (best) single quotes.
Problematic characters means spaces, and also characters which are
significant to your command shell, such as less-than/greater-than. Eg:
'hledger register -p 'last year' "accounts receivable
(receivable|payable)" amt:\>100'.
Characters which are significant both to the shell and in regular
expressions sometimes need to be double-escaped. These include
parentheses, the pipe symbol and the dollar sign. Eg, to match the
dollar symbol, bash users should do: 'hledger balance cur:'\$'' or
'hledger balance cur:\\$'.
When hledger is invoking an addon executable (like hledger-ui),
options and arguments get de-escaped once more, so you might need
_triple_-escaping. Eg: 'hledger ui cur:'\\$'' or 'hledger ui cur:\\\\$'
in bash. (The number of backslashes in fish shell is left as an
exercise for the reader.)
Inside a file used for argument expansion, one less level of escaping
is enough. (And in this case, backslashes seem to work better than
quotes. Eg: 'cur:\$').
If in doubt, keep things simple:
* run add-on executables directly
* write options after the command
* enclose problematic args in single quotes
* if needed, also add a backslash to escape regexp metacharacters
If you're really stumped, add '--debug=2' to troubleshoot.
File: hledger.info, Node: Input files, Next: Smart dates, Prev: Special characters, Up: OPTIONS
2.6 Input files
===============
hledger reads transactions from a data file (and the add command writes
to it). By default this file is '$HOME/.hledger.journal' (or on
Windows, something like 'C:/Users/USER/.hledger.journal'). You can
override this with the '$LEDGER_FILE' environment variable:
$ setenv LEDGER_FILE ~/finance/2016.journal
$ hledger stats
or with the '-f/--file' option:
$ hledger -f /some/file stats
The file name '-' (hyphen) means standard input:
$ cat some.journal | hledger -f-
Usually the data file is in hledger's journal format, but it can also
be one of several other formats, listed below. hledger detects the
format automatically based on the file extension, or if that is not
recognised, by trying each built-in "reader" in turn:
Reader: Reads: Used for file extensions:
----------------------------------------------------------------------------
'journal' hledger's journal format, also '.journal' '.j'
some Ledger journals '.hledger' '.ledger'
'timeclock' timeclock files (precise time '.timeclock'
logging)
'timedot' timedot files (approximate time '.timedot'
logging)
'csv' comma-separated values (data '.csv'
interchange)
If needed (eg to ensure correct error messages when a file has the
"wrong" extension), you can force a specific reader/format by prepending
it to the file path with a colon. Examples:
$ hledger -f csv:/some/csv-file.dat stats
$ echo 'i 2009/13/1 08:00:00' | hledger print -ftimeclock:-
You can also specify multiple '-f' options, to read multiple files as
one big journal. There are some limitations with this:
* directives in one file will not affect the other files
* balance assertions will not see any account balances from previous
files
If you need those, either use the include directive, or concatenate
the files, eg: 'cat a.journal b.journal | hledger -f- CMD'.
File: hledger.info, Node: Smart dates, Next: Report start & end date, Prev: Input files, Up: OPTIONS
2.7 Smart dates
===============
hledger's user interfaces accept a flexible "smart date" syntax (unlike
dates in the journal file). Smart dates allow some english words, can
be relative to today's date, and can have less-significant date parts
omitted (defaulting to 1).
Examples:
'2009/1/1', '2009/01/01', '2009-1-1', '2009.1.1' simple dates, several separators allowed
'2009/1', '2009' same as above - a missing day or month defaults to 1
'1/1', 'january', 'jan', 'this year' relative dates, meaning january 1 of the current year
'next year' january 1 of next year
'this month' the 1st of the current month
'this week' the most recent monday
'last week' the monday of the week before this one
'lastweek' spaces are optional
'today', 'yesterday', 'tomorrow'
File: hledger.info, Node: Report start & end date, Next: Report intervals, Prev: Smart dates, Up: OPTIONS
2.8 Report start & end date
===========================
Most hledger reports show the full span of time represented by the
journal data, by default. So, the effective report start and end dates
will be the earliest and latest transaction or posting dates found in
the journal.
Often you will want to see a shorter time span, such as the current
month. You can specify a start and/or end date using '-b/--begin',
'-e/--end', '-p/--period' or a 'date:' query (described below). All of
these accept the smart date syntax. One important thing to be aware of
when specifying end dates: as in Ledger, end dates are exclusive, so you
need to write the date _after_ the last day you want to include.
Examples:
'-b 2016/3/17' begin on St. Patrick's day 2016
'-e 12/1' end at the start of december 1st of the current year (11/30 will be the last date included)
'-b thismonth' all transactions on or after the 1st of the current month
'-p thismonth' all transactions in the current month
'date:2016/3/17-' the above written as queries instead
'date:-12/1'
'date:thismonth-'
'date:thismonth'
File: hledger.info, Node: Report intervals, Next: Period expressions, Prev: Report start & end date, Up: OPTIONS
2.9 Report intervals
====================
A report interval can be specified so that commands like register,
balance and activity will divide their reports into multiple subperiods.
The basic intervals can be selected with one of '-D/--daily',
'-W/--weekly', '-M/--monthly', '-Q/--quarterly', or '-Y/--yearly'. More
complex intervals may be specified with a period expression. Report
intervals can not be specified with a query, currently.
File: hledger.info, Node: Period expressions, Next: Depth limiting, Prev: Report intervals, Up: OPTIONS
2.10 Period expressions
=======================
The '-p/--period' option accepts period expressions, a shorthand way of
expressing a start date, end date, and/or report interval all at once.
Here's a basic period expression specifying the first quarter of
2009. Note, hledger always treats start dates as inclusive and end
dates as exclusive:
'-p "from 2009/1/1 to 2009/4/1"'
Keywords like "from" and "to" are optional, and so are the spaces, as
long as you don't run two dates together. "to" can also be written as
"-". These are equivalent to the above:
'-p "2009/1/1 2009/4/1"'
'-p2009/1/1to2009/4/1'
'-p2009/1/1-2009/4/1'
Dates are smart dates, so if the current year is 2009, the above can
also be written as:
'-p "1/1 4/1"'
'-p "january-apr"'
'-p "this year to 4/1"'
If you specify only one date, the missing start or end date will be
the earliest or latest transaction in your journal:
'-p "from 2009/1/1"' everything after january 1, 2009
'-p "from 2009/1"' the same
'-p "from 2009"' the same
'-p "to 2009"' everything before january 1, 2009
A single date with no "from" or "to" defines both the start and end
date like so:
'-p "2009"' the year 2009; equivalent to "2009/1/1 to 2010/1/1"
'-p "2009/1"' the month of jan; equivalent to "2009/1/1 to 2009/2/1"
'-p "2009/1/1"' just that day; equivalent to "2009/1/1 to 2009/1/2"
The argument of '-p' can also begin with, or be, a report interval
expression. The basic report intervals are 'daily', 'weekly',
'monthly', 'quarterly', or 'yearly', which have the same effect as the
'-D','-W','-M','-Q', or '-Y' flags. Between report interval and
start/end dates (if any), the word 'in' is optional. Examples:
'-p "weekly from 2009/1/1 to 2009/4/1"'
'-p "monthly in 2008"'
'-p "quarterly"'
Note that 'weekly', 'monthly', 'quarterly' and 'yearly' intervals
will always start on the first day on week, month, quarter or year
accordingly, and will end on the last day of same period, even if
associated period expression specifies different explicit start and end
date.
For example:
'-p "weekly from 2009/1/1 to 2009/4/1"' - starts on 2008/12/29, closest preceeding Monday
'-p "monthly in 2008/11/25"' - starts on 2018/11/01
'-p "quarterly from 2009-05-05 to 2009-06-01"' - starts on 2009/04/01, ends on 2009/06/30, which are first and last days of Q2 2009
'-p "yearly from 2009-12-29"' - starts on 2009/01/01, first day of 2009
The following more complex report intervals are also supported:
'biweekly', 'bimonthly', 'every day|week|month|quarter|year', 'every N
days|weeks|months|quarters|years'.
All of these will start on the first day of the requested period and
end on the last one, as described above.
Examples:
'-p "bimonthly from 2008"' - periods will have boundaries on 2008/01/01, 2008/03/01, ...
'-p "every 2 weeks"' - starts on closest preceeding Monday
'-p "every 5 month from 2009/03"' - periods will have boundaries on 2009/03/01, 2009/08/01, ...
If you want intervals that start on arbitrary day of your choosing
and span a week, month or year, you need to use any of the following:
'every Nth day of week', 'every <weekday>', 'every Nth day [of
month]', 'every Nth weekday [of month]', 'every MM/DD [of year]', 'every
Nth MMM [of year]', 'every MMM Nth [of year]'.
Examples:
'-p "every 2nd day of week"' - periods will go from Tue to Tue
'-p "every Tue"' - same
'-p "every 15th day"' - period boundaries will be on 15th of each month
'-p "every 2nd Monday"' - period boundaries will be on second Monday of each month
'-p "every 11/05"' - yearly periods with boundaries on 5th of Nov
'-p "every 5th Nov"' - same
'-p "every Nov 5th"' - same
Show historical balances at end of 15th each month (N is exclusive
end date):
'hledger balance -H -p "every 16th day"'
Group postings from start of wednesday to end of next tuesday (N is
start date and exclusive end date):
'hledger register checking -p "every 3rd day of week"'
File: hledger.info, Node: Depth limiting, Next: Pivoting, Prev: Period expressions, Up: OPTIONS
2.11 Depth limiting
===================
With the '--depth N' option (short form: '-N'), commands like account,
balance and register will show only the uppermost accounts in the
account tree, down to level N. Use this when you want a summary with
less detail. This flag has the same effect as a 'depth:' query argument
(so '-2', '--depth=2' or 'depth:2' are basically equivalent).
File: hledger.info, Node: Pivoting, Next: Cost, Prev: Depth limiting, Up: OPTIONS
2.12 Pivoting
=============
Normally hledger sums amounts, and organizes them in a hierarchy, based
on account name. The '--pivot FIELD' option causes it to sum and
organize hierarchy based on the value of some other field instead.
FIELD can be: 'code', 'description', 'payee', 'note', or the full name
(case insensitive) of any tag. As with account names, values containing
'colon:separated:parts' will be displayed hierarchically in reports.
'--pivot' is a general option affecting all reports; you can think of
hledger transforming the journal before any other processing, replacing
every posting's account name with the value of the specified field on
that posting, inheriting it from the transaction or using a blank value
if it's not present.
An example:
2016/02/16 Member Fee Payment
assets:bank account 2 EUR
income:member fees -2 EUR ; member: John Doe
Normal balance report showing account names:
$ hledger balance
2 EUR assets:bank account
-2 EUR income:member fees
--------------------
0
Pivoted balance report, using member: tag values instead:
$ hledger balance --pivot member
2 EUR
-2 EUR John Doe
--------------------
0
One way to show only amounts with a member: value (using a query,
described below):
$ hledger balance --pivot member tag:member=.
-2 EUR John Doe
--------------------
-2 EUR
Another way (the acct: query matches against the pivoted "account
name"):
$ hledger balance --pivot member acct:.
-2 EUR John Doe
--------------------
-2 EUR
File: hledger.info, Node: Cost, Next: Market value, Prev: Pivoting, Up: OPTIONS
2.13 Cost
=========
The '-B/--cost' flag converts amounts to their cost at transaction time,
if they have a transaction price specified.
File: hledger.info, Node: Market value, Next: Combining -B and -V, Prev: Cost, Up: OPTIONS
2.14 Market value
=================
The '-V/--value' flag converts reported amounts to their current market
value. Specifically, when there is a market price (P directive) for the
amount's commodity, dated on or before today's date (or the report end
date if specified), the amount will be converted to the price's
commodity.
When there are multiple applicable P directives, -V chooses the most
recent one, or in case of equal dates, the last-parsed one.
For example:
# one euro is worth this many dollars from nov 1
P 2016/11/01 € $1.10
# purchase some euros on nov 3
2016/11/3
assets:euros €100
assets:checking
# the euro is worth fewer dollars by dec 21
P 2016/12/21 € $1.03
How many euros do I have ?
$ hledger -f t.j bal euros
€100 assets:euros
What are they worth on nov 3 ? (no report end date specified,
defaults to the last date in the journal)
$ hledger -f t.j bal euros -V
$110.00 assets:euros
What are they worth on dec 21 ?
$ hledger -f t.j bal euros -V -e 2016/12/21
$103.00 assets:euros
Currently, hledger's -V only uses market prices recorded with P
directives, not transaction prices (unlike Ledger).
File: hledger.info, Node: Combining -B and -V, Next: Regular expressions, Prev: Market value, Up: OPTIONS
2.15 Combining -B and -V
========================
Using -B/-cost and -V/-value together is currently allowed, but the
results are probably not meaningful. Let us know if you find a use for
this.
File: hledger.info, Node: Regular expressions, Prev: Combining -B and -V, Up: OPTIONS
2.16 Regular expressions
========================
hledger uses regular expressions in a number of places:
* query terms, on the command line and in the hledger-web search
form: 'REGEX', 'desc:REGEX', 'cur:REGEX', 'tag:...=REGEX'
* CSV rules conditional blocks: 'if REGEX ...'
* account alias directives and options: 'alias /REGEX/ =
REPLACEMENT', '--alias /REGEX/=REPLACEMENT'
hledger's regular expressions come from the regex-tdfa library. In
general they:
* are case insensitive
* are infix matching (do not need to match the entire thing being
matched)
* are POSIX extended regular expressions
* also support GNU word boundaries (\<, \>, \b, \B)
* and parenthesised capturing groups and numeric backreferences in
replacement strings
* do not support mode modifiers like (?s)
Some things to note:
* In the 'alias' directive and '--alias' option, regular expressions
must be enclosed in forward slashes ('/REGEX/'). Elsewhere in
hledger, these are not required.
* In queries, to match a regular expression metacharacter like '$' as
a literal character, prepend a backslash. Eg to search for amounts
with the dollar sign in hledger-web, write 'cur:\$'.
* On the command line, some metacharacters like '$' have a special
meaning to the shell and so must be escaped at least once more.
See Special characters.
File: hledger.info, Node: QUERIES, Next: COMMANDS, Prev: OPTIONS, Up: Top
3 QUERIES
*********
One of hledger's strengths is being able to quickly report on precise
subsets of your data. Most commands accept an optional query
expression, written as arguments after the command name, to filter the
data by date, account name or other criteria. The syntax is similar to
a web search: one or more space-separated search terms, quotes to
enclose whitespace, prefixes to match specific fields, a not: prefix to
negate the match.
We do not yet support arbitrary boolean combinations of search terms;
instead most commands show transactions/postings/accounts which match
(or negatively match):
* any of the description terms AND
* any of the account terms AND
* any of the status terms AND
* all the other terms.
The print command instead shows transactions which:
* match any of the description terms AND
* have any postings matching any of the positive account terms AND
* have no postings matching any of the negative account terms AND
* match all the other terms.
The following kinds of search terms can be used. Remember these can
also be prefixed with *'not:'*, eg to exclude a particular subaccount.
*'REGEX'*
match account names by this regular expression. (No prefix is
equivalent to 'acct:').
*'acct:REGEX'*
same as above
*'amt:N, amt:<N, amt:<=N, amt:>N, amt:>=N'*
match postings with a single-commodity amount that is equal to,
less than, or greater than N. (Multi-commodity amounts are not
tested, and will always match.) The comparison has two modes: if N
is preceded by a + or - sign (or is 0), the two signed numbers are
compared. Otherwise, the absolute magnitudes are compared,
ignoring sign.
*'code:REGEX'*
match by transaction code (eg check number)
*'cur:REGEX'*
match postings or transactions including any amounts whose
currency/commodity symbol is fully matched by REGEX. (For a partial
match, use '.*REGEX.*'). Note, to match characters which are
regex-significant, like the dollar sign ('$'), you need to prepend
'\'. And when using the command line you need to add one more
level of quoting to hide it from the shell, so eg do: 'hledger
print cur:'\$'' or 'hledger print cur:\\$'.
*'desc:REGEX'*
match transaction descriptions.
*'date:PERIODEXPR'*
match dates within the specified period. PERIODEXPR is a period
expression (with no report interval). Examples: 'date:2016',
'date:thismonth', 'date:2000/2/1-2/15', 'date:lastweek-'. If the
'--date2' command line flag is present, this matches secondary
dates instead.
*'date2:PERIODEXPR'*
match secondary dates within the specified period.
*'depth:N'*
match (or display, depending on command) accounts at or above this
depth
*'note:REGEX'*
match transaction notes (part of description right of '|', or whole
description when there's no '|')
*'payee:REGEX'*
match transaction payee/payer names (part of description left of
'|', or whole description when there's no '|')
*'real:, real:0'*
match real or virtual postings respectively
*'status:, status:!, status:*'*
match unmarked, pending, or cleared transactions respectively
*'tag:REGEX[=REGEX]'*
match by tag name, and optionally also by tag value. Note a tag:
query is considered to match a transaction if it matches any of the
postings. Also remember that postings inherit the tags of their
parent transaction.
The following special search term is used automatically in
hledger-web, only:
*'inacct:ACCTNAME'*
tells hledger-web to show the transaction register for this
account. Can be filtered further with 'acct' etc.
Some of these can also be expressed as command-line options (eg
'depth:2' is equivalent to '--depth 2'). Generally you can mix options
and query arguments, and the resulting query will be their intersection
(perhaps excluding the '-p/--period' option).
File: hledger.info, Node: COMMANDS, Next: ADD-ON COMMANDS, Prev: QUERIES, Up: Top
4 COMMANDS
**********
hledger provides a number of subcommands; 'hledger' with no arguments
shows a list.
If you install additional 'hledger-*' packages, or if you put
programs or scripts named 'hledger-NAME' in your PATH, these will also
be listed as subcommands.
Run a subcommand by writing its name as first argument (eg 'hledger
incomestatement'). You can also write one of the standard short aliases
displayed in parentheses in the command list ('hledger b'), or any any
unambiguous prefix of a command name ('hledger inc').
Here are all the builtin commands in alphabetical order. See also
'hledger' for a more organised command list, and 'hledger CMD -h' for
detailed command help.
* Menu:
* accounts::
* activity::
* add::
* balance::
* balancesheet::
* balancesheetequity::
* cashflow::
* check-dates::
* check-dupes::
* equity::
* help::
* import::
* incomestatement::
* prices::
* print::
* print-unique::
* register::
* register-match::
* rewrite::
* stats::
* tags::
* test::
File: hledger.info, Node: accounts, Next: activity, Up: COMMANDS
4.1 accounts
============
Show account names. Alias: a.
'--tree'
show short account names, as a tree
'--flat'
show full account names, as a list (default)
'--drop=N'
in flat mode: omit N leading account name parts
This command lists all account names that are in use (ie, all the
accounts which have at least one transaction posting to them). With
query arguments, only matched account names are shown.
It shows a flat list by default. With '--tree', it uses indentation
to show the account hierarchy.
In flat mode you can add '--drop N' to omit the first few account
name components.
Examples:
$ hledger accounts --tree
assets
bank
checking
saving
cash
expenses
food
supplies
income
gifts
salary
liabilities
debts
$ hledger accounts --drop 1
bank:checking
bank:saving
cash
food
supplies
gifts
salary
debts
$ hledger accounts
assets:bank:checking
assets:bank:saving
assets:cash
expenses:food
expenses:supplies
income:gifts
income:salary
liabilities:debts
File: hledger.info, Node: activity, Next: add, Prev: accounts, Up: COMMANDS
4.2 activity
============
Show an ascii barchart of posting counts per interval.
The activity command displays an ascii histogram showing transaction
counts by day, week, month or other reporting interval (by day is the
default). With query arguments, it counts only matched transactions.
$ hledger activity --quarterly
2008-01-01 **
2008-04-01 *******
2008-07-01
2008-10-01 **
File: hledger.info, Node: add, Next: balance, Prev: activity, Up: COMMANDS
4.3 add
=======
Prompt for transactions and add them to the journal.
'--no-new-accounts'
don't allow creating new accounts; helps prevent typos when
entering account names
Many hledger users edit their journals directly with a text editor,
or generate them from CSV. For more interactive data entry, there is the
'add' command, which prompts interactively on the console for new
transactions, and appends them to the journal file (if there are
multiple '-f FILE' options, the first file is used.) Existing
transactions are not changed. This is the only hledger command that
writes to the journal file.
To use it, just run 'hledger add' and follow the prompts. You can
add as many transactions as you like; when you are finished, enter '.'
or press control-d or control-c to exit.
Features:
* add tries to provide useful defaults, using the most similar recent
transaction (by description) as a template.
* You can also set the initial defaults with command line arguments.
* Readline-style edit keys can be used during data entry.
* The tab key will auto-complete whenever possible - accounts,
descriptions, dates ('yesterday', 'today', 'tomorrow'). If the
input area is empty, it will insert the default value.
* If the journal defines a default commodity, it will be added to any
bare numbers entered.
* A parenthesised transaction code may be entered following a date.
* Comments and tags may be entered following a description or amount.
* If you make a mistake, enter '<' at any prompt to restart the
transaction.
* Input prompts are displayed in a different colour when the terminal
supports it.
Example (see the tutorial for a detailed explanation):
$ hledger add
Adding transactions to journal file /src/hledger/examples/sample.journal
Any command line arguments will be used as defaults.
Use tab key to complete, readline keys to edit, enter to accept defaults.
An optional (CODE) may follow transaction dates.
An optional ; COMMENT may follow descriptions or amounts.
If you make a mistake, enter < at any prompt to restart the transaction.
To end a transaction, enter . when prompted.
To quit, enter . at a date prompt or press control-d or control-c.
Date [2015/05/22]:
Description: supermarket
Account 1: expenses:food
Amount 1: $10
Account 2: assets:checking
Amount 2 [$-10.0]:
Account 3 (or . or enter to finish this transaction): .
2015/05/22 supermarket
expenses:food $10
assets:checking $-10.0
Save this transaction to the journal ? [y]:
Saved.
Starting the next transaction (. or ctrl-D/ctrl-C to quit)
Date [2015/05/22]: <CTRL-D> $
File: hledger.info, Node: balance, Next: balancesheet, Prev: add, Up: COMMANDS
4.4 balance
===========
Show accounts and their balances. Aliases: b, bal.
'--change'
show balance change in each period (default)
'--cumulative'
show balance change accumulated across periods (in multicolumn
reports)
'-H --historical'
show historical ending balance in each period (includes postings
before report start date)
'--tree'
show accounts as a tree; amounts include subaccounts (default in
simple reports)
'--flat'
show accounts as a list; amounts exclude subaccounts except when
account is depth-clipped (default in multicolumn reports)
'-A --average'
show a row average column (in multicolumn mode)
'-T --row-total'
show a row total column (in multicolumn mode)
'-N --no-total'
don't show the final total row
'--drop=N'
omit N leading account name parts (in flat mode)
'--no-elide'
don't squash boring parent accounts (in tree mode)
'--format=LINEFORMAT'
in single-column balance reports: use this custom line format
'-O FMT --output-format=FMT'
select the output format. Supported formats: txt, csv.
'-o FILE --output-file=FILE'
write output to FILE. A file extension matching one of the above
formats selects that format.
'--pretty-tables'
use unicode to display prettier tables.
'--sort-amount'
sort by amount instead of account name (in flat mode). With
multiple columns, sorts by the row total, or by row average if that
is displayed.
'--budget'
show performance compared to budget goals defined by periodic
transactions
'--show-unbudgeted'
with -budget, show unbudgeted accounts also
The balance command displays accounts and balances. It is hledger's
most featureful and versatile command.
$ hledger balance
$-1 assets
$1 bank:saving
$-2 cash
$2 expenses
$1 food
$1 supplies
$-2 income
$-1 gifts
$-1 salary
$1 liabilities:debts
--------------------
0
More precisely, the balance command shows the _change_ to each
account's balance caused by all (matched) postings. In the common case
where you do not filter by date and your journal sets the correct
opening balances, this is the same as the account's ending balance.
By default, accounts are displayed hierarchically, with subaccounts
indented below their parent. "Boring" accounts, which contain a single
interesting subaccount and no balance of their own, are elided into the
following line for more compact output. (Use '--no-elide' to prevent
this. Eliding of boring accounts is not yet supported in multicolumn
reports.)
Each account's balance is the "inclusive" balance - it includes the
balances of any subaccounts.
Accounts which have zero balance (and no non-zero subaccounts) are
omitted. Use '-E/--empty' to show them.
A final total is displayed by default; use '-N/--no-total' to
suppress it:
$ hledger balance -p 2008/6 expenses --no-total
$2 expenses
$1 food
$1 supplies
* Menu:
* Flat mode::
* Depth limited balance reports::
* Multicolumn balance reports::
* Budgets::
* Custom balance output::
* Colour support::
* Output destination::
* CSV output::
File: hledger.info, Node: Flat mode, Next: Depth limited balance reports, Up: balance
4.4.1 Flat mode
---------------
To see a flat list of full account names instead of the default
hierarchical display, use '--flat'. In this mode, accounts (unless
depth-clipped) show their "exclusive" balance, excluding any subaccount
balances. In this mode, you can also use '--drop N' to omit the first
few account name components.
$ hledger balance -p 2008/6 expenses -N --flat --drop 1
$1 food
$1 supplies
File: hledger.info, Node: Depth limited balance reports, Next: Multicolumn balance reports, Prev: Flat mode, Up: balance
4.4.2 Depth limited balance reports
-----------------------------------
With '--depth N', balance shows accounts only to the specified depth.
This is very useful to show a complex charts of accounts in less detail.
In flat mode, balances from accounts below the depth limit will be shown
as part of a parent account at the depth limit.
$ hledger balance -N --depth 1
$-1 assets
$2 expenses
$-2 income
$1 liabilities
File: hledger.info, Node: Multicolumn balance reports, Next: Budgets, Prev: Depth limited balance reports, Up: balance
4.4.3 Multicolumn balance reports
---------------------------------
With a reporting interval, multiple balance columns will be shown, one
for each report period. There are three types of multi-column balance
report, showing different information:
1. By default: each column shows the sum of postings in that period,
ie the account's change of balance in that period. This is useful
eg for a monthly income statement:
$ hledger balance --quarterly income expenses -E
Balance changes in 2008:
|| 2008q1 2008q2 2008q3 2008q4
===================++=================================
expenses:food || 0 $1 0 0
expenses:supplies || 0 $1 0 0
income:gifts || 0 $-1 0 0
income:salary || $-1 0 0 0
-------------------++---------------------------------
|| $-1 $1 0 0
2. With '--cumulative': each column shows the ending balance for that
period, accumulating the changes across periods, starting from 0 at
the report start date:
$ hledger balance --quarterly income expenses -E --cumulative
Ending balances (cumulative) in 2008:
|| 2008/03/31 2008/06/30 2008/09/30 2008/12/31
===================++=================================================
expenses:food || 0 $1 $1 $1
expenses:supplies || 0 $1 $1 $1
income:gifts || 0 $-1 $-1 $-1
income:salary || $-1 $-1 $-1 $-1
-------------------++-------------------------------------------------
|| $-1 0 0 0
3. With '--historical/-H': each column shows the actual historical
ending balance for that period, accumulating the changes across
periods, starting from the actual balance at the report start date.
This is useful eg for a multi-period balance sheet, and when you
are showing only the data after a certain start date:
$ hledger balance ^assets ^liabilities --quarterly --historical --begin 2008/4/1
Ending balances (historical) in 2008/04/01-2008/12/31:
|| 2008/06/30 2008/09/30 2008/12/31
======================++=====================================
assets:bank:checking || $1 $1 0
assets:bank:saving || $1 $1 $1
assets:cash || $-2 $-2 $-2
liabilities:debts || 0 0 $1
----------------------++-------------------------------------
|| 0 0 0
Multi-column balance reports display accounts in flat mode by
default; to see the hierarchy, use '--tree'.
With a reporting interval (like '--quarterly' above), the report
start/end dates will be adjusted if necessary so that they encompass the
displayed report periods. This is so that the first and last periods
will be "full" and comparable to the others.
The '-E/--empty' flag does two things in multicolumn balance reports:
first, the report will show all columns within the specified report
period (without -E, leading and trailing columns with all zeroes are not
shown). Second, all accounts which existed at the report start date
will be considered, not just the ones with activity during the report
period (use -E to include low-activity accounts which would otherwise
would be omitted).
The '-T/--row-total' flag adds an additional column showing the total
for each row.
The '-A/--average' flag adds a column showing the average value in
each row.
Here's an example of all three:
$ hledger balance -Q income expenses --tree -ETA
Balance changes in 2008:
|| 2008q1 2008q2 2008q3 2008q4 Total Average
============++===================================================
expenses || 0 $2 0 0 $2 $1
food || 0 $1 0 0 $1 0
supplies || 0 $1 0 0 $1 0
income || $-1 $-1 0 0 $-2 $-1
gifts || 0 $-1 0 0 $-1 0
salary || $-1 0 0 0 $-1 0
------------++---------------------------------------------------
|| $-1 $1 0 0 0 0
# Average is rounded to the dollar here since all journal amounts are
File: hledger.info, Node: Budgets, Next: Custom balance output, Prev: Multicolumn balance reports, Up: balance
4.4.4 Budgets
-------------
With '--budget' and a report interval, all periodic transactions in your
journal with that interval, active during the requested report period,
are interpreted as recurring budget goals for the specified accounts
(and subaccounts), and the report will show the difference between
actual and budgeted balances.
For example, you can take average monthly expenses in the common
expense categories to construct a minimal monthly budget:
;; Budget
~ monthly
income $2000
expenses:food $400
expenses:bus $50
expenses:movies $30
assets:bank:checking
;; Two months worth of expenses
2017-11-01
income $1950
expenses:food $396
expenses:bus $49
expenses:movies $30
expenses:supplies $20
assets:bank:checking
2017-12-01
income $2100
expenses:food $412
expenses:bus $53
expenses:gifts $100
assets:bank:checking
You can now see a monthly budget performance report:
$ hledger balance -M --budget
Balance changes in 2017/11/01-2017/12/31:
|| 2017/11 2017/12
=======================++=================================================
<unbudgeted>:expenses || $20 $100
assets:bank:checking || $-2445 [99% of $-2480] $-2665 [107% of $-2480]
expenses:bus || $49 [98% of $50] $53 [106% of $50]
expenses:food || $396 [99% of $400] $412 [103% of $400]
expenses:movies || $30 [100% of $30] 0 [0% of $30]
income || $1950 [98% of $2000] $2100 [105% of $2000]
-----------------------++-------------------------------------------------
|| 0 0
You can roll over unspent budgets to next period with '--cumulative':
$ hledger balance -M --budget --cumulative
Ending balances (cumulative) in 2017/11/01-2017/12/31:
|| 2017/11/30 2017/12/31
=======================++=================================================
<unbudgeted>:expenses || $20 $120
assets:bank:checking || $-2445 [99% of $-2480] $-5110 [103% of $-4960]
expenses:bus || $49 [98% of $50] $102 [102% of $100]
expenses:food || $396 [99% of $400] $808 [101% of $800]
expenses:movies || $30 [100% of $30] $30 [50% of $60]
income || $1950 [98% of $2000] $4050 [101% of $4000]
-----------------------++-------------------------------------------------
|| 0 0
Accounts with no budget goals (not mentioned in the periodic
transactions) will be aggregated under '<unbudgeted>', unless you add
the '--show-unbudgeted' flag to display them normally:
$ hledger balance --budget --show-unbudgeted
Balance changes in 2017/11/01-2017/12/31:
|| 2017/11 2017/12
======================++=================================================
assets:bank:checking || $-2445 [99% of $-2480] $-2665 [107% of $-2480]
expenses:bus || $49 [98% of $50] $53 [106% of $50]
expenses:food || $396 [99% of $400] $412 [103% of $400]
expenses:gifts || 0 $100
expenses:movies || $30 [100% of $30] 0 [0% of $30]
expenses:supplies || $20 0
income || $1950 [98% of $2000] $2100 [105% of $2000]
----------------------++-------------------------------------------------
|| 0 0
For more examples and details, see Budgeting and Forecasting.
File: hledger.info, Node: Custom balance output, Next: Colour support, Prev: Budgets, Up: balance
4.4.5 Custom balance output
---------------------------
In simple (non-multi-column) balance reports, you can customise the
output with '--format FMT':
$ hledger balance --format "%20(account) %12(total)"
assets $-1
bank:saving $1
cash $-2
expenses $2
food $1
supplies $1
income $-2
gifts $-1
salary $-1
liabilities:debts $1
---------------------------------
0
The FMT format string (plus a newline) specifies the formatting
applied to each account/balance pair. It may contain any suitable text,
with data fields interpolated like so:
'%[MIN][.MAX](FIELDNAME)'
* MIN pads with spaces to at least this width (optional)
* MAX truncates at this width (optional)
* FIELDNAME must be enclosed in parentheses, and can be one of:
* 'depth_spacer' - a number of spaces equal to the account's
depth, or if MIN is specified, MIN * depth spaces.
* 'account' - the account's name
* 'total' - the account's balance/posted total, right justified
Also, FMT can begin with an optional prefix to control how
multi-commodity amounts are rendered:
* '%_' - render on multiple lines, bottom-aligned (the default)
* '%^' - render on multiple lines, top-aligned
* '%,' - render on one line, comma-separated
There are some quirks. Eg in one-line mode, '%(depth_spacer)' has no
effect, instead '%(account)' has indentation built in. Experimentation
may be needed to get pleasing results.
Some example formats:
* '%(total)' - the account's total
* '%-20.20(account)' - the account's name, left justified, padded to
20 characters and clipped at 20 characters
* '%,%-50(account) %25(total)' - account name padded to 50
characters, total padded to 20 characters, with multiple
commodities rendered on one line
* '%20(total) %2(depth_spacer)%-(account)' - the default format for
the single-column balance report
File: hledger.info, Node: Colour support, Next: Output destination, Prev: Custom balance output, Up: balance
4.4.6 Colour support
--------------------
The balance command shows negative amounts in red, if:
* the 'TERM' environment variable is not set to 'dumb'
* the output is not being redirected or piped anywhere
File: hledger.info, Node: Output destination, Next: CSV output, Prev: Colour support, Up: balance
4.4.7 Output destination
------------------------
The balance, print, register and stats commands can write their output
to a destination other than the console. This is controlled by the
'-o/--output-file' option.
$ hledger balance -o - # write to stdout (the default)
$ hledger balance -o FILE # write to FILE
File: hledger.info, Node: CSV output, Prev: Output destination, Up: balance
4.4.8 CSV output
----------------
The balance, print and register commands can write their output as CSV.
This is useful for exporting data to other applications, eg to make
charts in a spreadsheet. This is controlled by the '-O/--output-format'
option, or by specifying a '.csv' file extension with
'-o/--output-file'.
$ hledger balance -O csv # write CSV to stdout
$ hledger balance -o FILE.csv # write CSV to FILE.csv
File: hledger.info, Node: balancesheet, Next: balancesheetequity, Prev: balance, Up: COMMANDS
4.5 balancesheet
================
Show a balance sheet. Alias: bs.
'--change'
show balance change in each period, instead of historical ending
balances
'--cumulative'
show balance change accumulated across periods (in multicolumn
reports), instead of historical ending balances
'-H --historical'
show historical ending balance in each period (includes postings
before report start date) (default)
'--tree'
show accounts as a tree; amounts include subaccounts (default in
simple reports)
'--flat'
show accounts as a list; amounts exclude subaccounts except when
account is depth-clipped (default in multicolumn reports)
'-A --average'
show a row average column (in multicolumn mode)
'-T --row-total'
show a row total column (in multicolumn mode)
'-N --no-total'
don't show the final total row
'--drop=N'
omit N leading account name parts (in flat mode)
'--no-elide'
don't squash boring parent accounts (in tree mode)
'--format=LINEFORMAT'
in single-column balance reports: use this custom line format
'--sort-amount'
sort by amount instead of account name
This command displays a simple balance sheet. It currently assumes
that you have top-level accounts named 'asset' and 'liability' (plural
forms also allowed.)
$ hledger balancesheet
Balance Sheet
Assets:
$-1 assets
$1 bank:saving
$-2 cash
--------------------
$-1
Liabilities:
$1 liabilities:debts
--------------------
$1
Total:
--------------------
0
With a reporting interval, multiple columns will be shown, one for
each report period. As with multicolumn balance reports, you can alter
the report mode with '--change'/'--cumulative'/'--historical'. Normally
balancesheet shows historical ending balances, which is what you need
for a balance sheet; note this means it ignores report begin dates.
File: hledger.info, Node: balancesheetequity, Next: cashflow, Prev: balancesheet, Up: COMMANDS
4.6 balancesheetequity
======================
Show a balance sheet including equity. Alias: bse.
Other than showing the equity accounts, this command is exactly the
same as the command balancesheet. Please refer to it for the available
options.
This command displays a balancesheet. It currently assumes that you
have top-level accounts named 'asset', 'liability' and 'equity' (plural
forms also allowed.)
$ hledger balancesheetequity
Balance Sheet With Equity
Assets:
$-2 assets
$1 bank:saving
$-3 cash
--------------------
$-2
Liabilities:
$1 liabilities:debts
--------------------
$1
Equity:
$1 equity:owner
--------------------
$1
Total:
--------------------
0
File: hledger.info, Node: cashflow, Next: check-dates, Prev: balancesheetequity, Up: COMMANDS
4.7 cashflow
============
Show a cashflow statement. Alias: cf.
'--change'
show balance change in each period (default)
'--cumulative'
show balance change accumulated across periods (in multicolumn
reports), instead of changes during periods
'-H --historical'
show historical ending balance in each period (includes postings
before report start date), instead of changes during each period
'--tree'
show accounts as a tree; amounts include subaccounts (default in
simple reports)
'--flat'
show accounts as a list; amounts exclude subaccounts except when
account is depth-clipped (default in multicolumn reports)
'-A --average'
show a row average column (in multicolumn mode)
'-T --row-total'
show a row total column (in multicolumn mode)
'-N --no-total'
don't show the final total row (in simple reports)
'--drop=N'
omit N leading account name parts (in flat mode)
'--no-elide'
don't squash boring parent accounts (in tree mode)
'--format=LINEFORMAT'
in single-column balance reports: use this custom line format
'--sort-amount'
sort by amount instead of account name
This command displays a simple cashflow statement It shows the change
in all "cash" (ie, liquid assets) accounts for the period. It currently
assumes that cash accounts are under a top-level account named 'asset'
and do not contain 'receivable', ':A/R' or ':fixed'.
$ hledger cashflow
Cashflow Statement
Cash flows:
$-1 assets
$1 bank:saving
$-2 cash
--------------------
$-1
Total:
--------------------
$-1
With a reporting interval, multiple columns will be shown, one for
each report period. Normally cashflow shows changes in assets per
period, though as with multicolumn balance reports you can alter the
report mode with '--change'/'--cumulative'/'--historical'.
File: hledger.info, Node: check-dates, Next: check-dupes, Prev: cashflow, Up: COMMANDS
4.8 check-dates
===============
Check that transactions are sorted by increasing date. With a query,
only matched transactions' dates are checked.
File: hledger.info, Node: check-dupes, Next: equity, Prev: check-dates, Up: COMMANDS
4.9 check-dupes
===============
Report account names having the same leaf but different prefixes. An
example: http://stefanorodighiero.net/software/hledger-dupes.html
File: hledger.info, Node: equity, Next: help, Prev: check-dupes, Up: COMMANDS
4.10 equity
===========
Print closing/opening transactions that bring some or all account
balances to zero and back. Can be useful for bringing account balances
across file boundaries.
File: hledger.info, Node: help, Next: import, Prev: equity, Up: COMMANDS
4.11 help
=========
Show any of the hledger manuals.
The 'help' command displays any of the main hledger manuals, in one
of several ways. Run it with no argument to list the manuals, or
provide a full or partial manual name to select one.
hledger manuals are available in several formats. hledger help will
use the first of these display methods that it finds: info, man, $PAGER,
less, stdout (or when non-interactive, just stdout). You can force a
particular viewer with the '--info', '--man', '--pager', '--cat' flags.
$ hledger help
Please choose a manual by typing "hledger help MANUAL" (a substring is ok).
Manuals: hledger hledger-ui hledger-web hledger-api journal csv timeclock timedot
$ hledger help h --man
hledger(1) hledger User Manuals hledger(1)
NAME
hledger - a command-line accounting tool
SYNOPSIS
hledger [-f FILE] COMMAND [OPTIONS] [ARGS]
hledger [-f FILE] ADDONCMD -- [OPTIONS] [ARGS]
hledger
DESCRIPTION
hledger is a cross-platform program for tracking money, time, or any
...
File: hledger.info, Node: import, Next: incomestatement, Prev: help, Up: COMMANDS
4.12 import
===========
Read new transactions added to each FILE since last run, and add them to
the main journal file.
'--dry-run'
just show the transactions to be imported
The input files are specified as arguments - no need to write -f
before each one. So eg to add new transactions from all CSV files to
the main journal, it's just: 'hledger import *.csv'
New transactions are detected in the same way as print -new: by
assuming transactions are always added to the input files in increasing
date order, and by saving '.latest.FILE' state files.
The -dry-run output is in journal format, so you can filter it, eg to
see only uncategorised transactions:
$ hledger import --dry ... | hledger -f- print unknown --ignore-assertions
File: hledger.info, Node: incomestatement, Next: prices, Prev: import, Up: COMMANDS
4.13 incomestatement
====================
Show an income statement. Alias: is.
'--change'
show balance change in each period (default)
'--cumulative'
show balance change accumulated across periods (in multicolumn
reports), instead of changes during periods
'-H --historical'
show historical ending balance in each period (includes postings
before report start date), instead of changes during each period
'--tree'
show accounts as a tree; amounts include subaccounts (default in
simple reports)
'--flat'
show accounts as a list; amounts exclude subaccounts except when
account is depth-clipped (default in multicolumn reports)
'-A --average'
show a row average column (in multicolumn mode)
'-T --row-total'
show a row total column (in multicolumn mode)
'-N --no-total'
don't show the final total row
'--drop=N'
omit N leading account name parts (in flat mode)
'--no-elide'
don't squash boring parent accounts (in tree mode)
'--format=LINEFORMAT'
in single-column balance reports: use this custom line format
'--sort-amount'
sort by amount instead of account name
This command displays a simple income statement. It currently
assumes that you have top-level accounts named 'income' (or 'revenue')
and 'expense' (plural forms also allowed.)
$ hledger incomestatement
Income Statement
Revenues:
$-2 income
$-1 gifts
$-1 salary
--------------------
$-2
Expenses:
$2 expenses
$1 food
$1 supplies
--------------------
$2
Total:
--------------------
0
With a reporting interval, multiple columns will be shown, one for
each report period. Normally incomestatement shows revenues/expenses
per period, though as with multicolumn balance reports you can alter the
report mode with '--change'/'--cumulative'/'--historical'.
File: hledger.info, Node: prices, Next: print, Prev: incomestatement, Up: COMMANDS
4.14 prices
===========
Print all market prices from the journal.
File: hledger.info, Node: print, Next: print-unique, Prev: prices, Up: COMMANDS
4.15 print
==========
Show transactions from the journal. Aliases: p, txns.
'-m STR --match=STR'
show the transaction whose description is most similar to STR, and
is most recent
'--new'
show only newer-dated transactions added in each file since last
run
'-x --explicit'
show all amounts explicitly
'-O FMT --output-format=FMT'
select the output format. Supported formats: txt, csv.
'-o FILE --output-file=FILE'
write output to FILE. A file extension matching one of the above
formats selects that format.
$ hledger print
2008/01/01 income
assets:bank:checking $1
income:salary $-1
2008/06/01 gift
assets:bank:checking $1
income:gifts $-1
2008/06/02 save
assets:bank:saving $1
assets:bank:checking $-1
2008/06/03 * eat & shop
expenses:food $1
expenses:supplies $1
assets:cash $-2
2008/12/31 * pay off
liabilities:debts $1
assets:bank:checking $-1
The print command displays full journal entries (transactions) from
the journal file in date order, tidily formatted. print's output is
always a valid hledger journal. It preserves all transaction
information, but it does not preserve directives or inter-transaction
comments
Normally, the journal entry's explicit or implicit amount style is
preserved. Ie when an amount is omitted in the journal, it will be
omitted in the output. You can use the '-x'/'--explicit' flag to make
all amounts explicit, which can be useful for troubleshooting or for
making your journal more readable and robust against data entry errors.
Note, '-x' will cause postings with a multi-commodity amount (these can
arise when a multi-commodity transaction has an implicit amount) will be
split into multiple single-commodity postings, for valid journal output.
With '-B'/'--cost', amounts with transaction prices are converted to
cost using that price. This can be used for troubleshooting.
With '-m'/'--match' and a STR argument, print will show at most one
transaction: the one one whose description is most similar to STR, and
is most recent. STR should contain at least two characters. If there
is no similar-enough match, no transaction will be shown.
With '--new', for each FILE being read, hledger reads (and writes) a
special state file ('.latest.FILE' in the same directory), containing
the latest transaction date(s) that were seen last time FILE was read.
When this file is found, only transactions with newer dates (and new
transactions on the latest date) are printed. This is useful for
ignoring already-seen entries in import data, such as downloaded CSV
files. Eg:
$ hledger -f bank1.csv print --new
# shows transactions added since last print --new on this file
This assumes that transactions added to FILE always have same or
increasing dates, and that transactions on the same day do not get
reordered. See also the import command.
The print command also supports output destination and CSV output.
Here's an example of print's CSV output:
$ hledger print -Ocsv
"txnidx","date","date2","status","code","description","comment","account","amount","commodity","credit","debit","posting-status","posting-comment"
"1","2008/01/01","","","","income","","assets:bank:checking","1","$","","1","",""
"1","2008/01/01","","","","income","","income:salary","-1","$","1","","",""
"2","2008/06/01","","","","gift","","assets:bank:checking","1","$","","1","",""
"2","2008/06/01","","","","gift","","income:gifts","-1","$","1","","",""
"3","2008/06/02","","","","save","","assets:bank:saving","1","$","","1","",""
"3","2008/06/02","","","","save","","assets:bank:checking","-1","$","1","","",""
"4","2008/06/03","","*","","eat & shop","","expenses:food","1","$","","1","",""
"4","2008/06/03","","*","","eat & shop","","expenses:supplies","1","$","","1","",""
"4","2008/06/03","","*","","eat & shop","","assets:cash","-2","$","2","","",""
"5","2008/12/31","","*","","pay off","","liabilities:debts","1","$","","1","",""
"5","2008/12/31","","*","","pay off","","assets:bank:checking","-1","$","1","","",""
* There is one CSV record per posting, with the parent transaction's
fields repeated.
* The "txnidx" (transaction index) field shows which postings belong
to the same transaction. (This number might change if transactions
are reordered within the file, files are parsed/included in a
different order, etc.)
* The amount is separated into "commodity" (the symbol) and "amount"
(numeric quantity) fields.
* The numeric amount is repeated in either the "credit" or "debit"
column, for convenience. (Those names are not accurate in the
accounting sense; it just puts negative amounts under credit and
zero or greater amounts under debit.)
File: hledger.info, Node: print-unique, Next: register, Prev: print, Up: COMMANDS
4.16 print-unique
=================
Print transactions which do not reuse an already-seen description.
File: hledger.info, Node: register, Next: register-match, Prev: print-unique, Up: COMMANDS
4.17 register
=============
Show postings and their running total. Aliases: r, reg.
'--cumulative'
show running total from report start date (default)
'-H --historical'
show historical running total/balance (includes postings before
report start date)
'-A --average'
show running average of posting amounts instead of total (implies
-empty)
'-r --related'
show postings' siblings instead
'-w N --width=N'
set output width (default: terminal width or COLUMNS. -wN,M sets
description width as well)
'-O FMT --output-format=FMT'
select the output format. Supported formats: txt, csv.
'-o FILE --output-file=FILE'
write output to FILE. A file extension matching one of the above
formats selects that format.
The register command displays postings, one per line, and their
running total. This is typically used with a query selecting a
particular account, to see that account's activity:
$ hledger register checking
2008/01/01 income assets:bank:checking $1 $1
2008/06/01 gift assets:bank:checking $1 $2
2008/06/02 save assets:bank:checking $-1 $1
2008/12/31 pay off assets:bank:checking $-1 0
The '--historical'/'-H' flag adds the balance from any undisplayed
prior postings to the running total. This is useful when you want to
see only recent activity, with a historically accurate running balance:
$ hledger register checking -b 2008/6 --historical
2008/06/01 gift assets:bank:checking $1 $2
2008/06/02 save assets:bank:checking $-1 $1
2008/12/31 pay off assets:bank:checking $-1 0
The '--depth' option limits the amount of sub-account detail
displayed.
The '--average'/'-A' flag shows the running average posting amount
instead of the running total (so, the final number displayed is the
average for the whole report period). This flag implies '--empty' (see
below). It is affected by '--historical'. It works best when showing
just one account and one commodity.
The '--related'/'-r' flag shows the _other_ postings in the
transactions of the postings which would normally be shown.
With a reporting interval, register shows summary postings, one per
interval, aggregating the postings to each account:
$ hledger register --monthly income
2008/01 income:salary $-1 $-1
2008/06 income:gifts $-1 $-2
Periods with no activity, and summary postings with a zero amount,
are not shown by default; use the '--empty'/'-E' flag to see them:
$ hledger register --monthly income -E
2008/01 income:salary $-1 $-1
2008/02 0 $-1
2008/03 0 $-1
2008/04 0 $-1
2008/05 0 $-1
2008/06 income:gifts $-1 $-2
2008/07 0 $-2
2008/08 0 $-2
2008/09 0 $-2
2008/10 0 $-2
2008/11 0 $-2
2008/12 0 $-2
Often, you'll want to see just one line per interval. The '--depth'
option helps with this, causing subaccounts to be aggregated:
$ hledger register --monthly assets --depth 1h
2008/01 assets $1 $1
2008/06 assets $-1 0
2008/12 assets $-1 $-1
Note when using report intervals, if you specify start/end dates
these will be adjusted outward if necessary to contain a whole number of
intervals. This ensures that the first and last intervals are full
length and comparable to the others in the report.
* Menu:
* Custom register output::
File: hledger.info, Node: Custom register output, Up: register
4.17.1 Custom register output
-----------------------------
register uses the full terminal width by default, except on windows.
You can override this by setting the 'COLUMNS' environment variable (not
a bash shell variable) or by using the '--width'/'-w' option.
The description and account columns normally share the space equally
(about half of (width - 40) each). You can adjust this by adding a
description width as part of -width's argument, comma-separated:
'--width W,D' . Here's a diagram:
<--------------------------------- width (W) ---------------------------------->
date (10) description (D) account (W-41-D) amount (12) balance (12)
DDDDDDDDDD dddddddddddddddddddd aaaaaaaaaaaaaaaaaaa AAAAAAAAAAAA AAAAAAAAAAAA
and some examples:
$ hledger reg # use terminal width (or 80 on windows)
$ hledger reg -w 100 # use width 100
$ COLUMNS=100 hledger reg # set with one-time environment variable
$ export COLUMNS=100; hledger reg # set till session end (or window resize)
$ hledger reg -w 100,40 # set overall width 100, description width 40
$ hledger reg -w $COLUMNS,40 # use terminal width, and set description width
The register command also supports the '-o/--output-file' and
'-O/--output-format' options for controlling output destination and CSV
output.
File: hledger.info, Node: register-match, Next: rewrite, Prev: register, Up: COMMANDS
4.18 register-match
===================
Print the one posting whose transaction description is closest to DESC,
in the style of the register command. Helps ledger-autosync detect
already-seen transactions when importing.
File: hledger.info, Node: rewrite, Next: stats, Prev: register-match, Up: COMMANDS
4.19 rewrite
============
Print all transactions, adding custom postings to the matched ones.
File: hledger.info, Node: stats, Next: tags, Prev: rewrite, Up: COMMANDS
4.20 stats
==========
Show some journal statistics.
'-o FILE --output-file=FILE'
write output to FILE. A file extension matching one of the above
formats selects that format.
$ hledger stats
Main journal file : /src/hledger/examples/sample.journal
Included journal files :
Transactions span : 2008-01-01 to 2009-01-01 (366 days)
Last transaction : 2008-12-31 (2333 days ago)
Transactions : 5 (0.0 per day)
Transactions last 30 days: 0 (0.0 per day)
Transactions last 7 days : 0 (0.0 per day)
Payees/descriptions : 5
Accounts : 8 (depth 3)
Commodities : 1 ($)
The stats command displays summary information for the whole journal,
or a matched part of it. With a reporting interval, it shows a report
for each report period.
The stats command also supports '-o/--output-file' for controlling
output destination.
File: hledger.info, Node: tags, Next: test, Prev: stats, Up: COMMANDS
4.21 tags
=========
List all the tag names used in the journal. With a TAGREGEX argument,
only tag names matching the regular expression (case insensitive) are
shown. With additional QUERY arguments, only transactions matching the
query are considered.
File: hledger.info, Node: test, Prev: tags, Up: COMMANDS
4.22 test
=========
Run built-in unit tests.
$ hledger test
Cases: 74 Tried: 74 Errors: 0 Failures: 0
This command runs hledger's built-in unit tests and displays a quick
report. With a regular expression argument, it selects only tests with
matching names. It's mainly used in development, but it's also nice to
be able to check your hledger executable for smoke at any time.
File: hledger.info, Node: ADD-ON COMMANDS, Prev: COMMANDS, Up: Top
5 ADD-ON COMMANDS
*****************
hledger also searches for external add-on commands, and will include
these in the commands list. These are programs or scripts in your PATH
whose name starts with 'hledger-' and ends with a recognised file
extension (currently: no extension, 'bat','com','exe',
'hs','lhs','pl','py','rb','rkt','sh').
Add-ons can be invoked like any hledger command, but there are a few
things to be aware of. Eg if the 'hledger-web' add-on is installed,
* 'hledger -h web' shows hledger's help, while 'hledger web -h' shows
hledger-web's help.
* Flags specific to the add-on must have a preceding '--' to hide
them from hledger. So 'hledger web --serve --port 9000' will be
rejected; you must use 'hledger web -- --serve --port 9000'.
* You can always run add-ons directly if preferred: 'hledger-web
--serve --port 9000'.
Add-ons are a relatively easy way to add local features or experiment
with new ideas. They can be written in any language, but haskell
scripts have a big advantage: they can use the same hledger (and
haskell) library functions that built-in commands do, for command-line
options, journal parsing, reporting, etc.
Here are some hledger add-ons available:
* Menu:
* Official add-ons::
* Third party add-ons::
* Experimental add-ons::
File: hledger.info, Node: Official add-ons, Next: Third party add-ons, Up: ADD-ON COMMANDS
5.1 Official add-ons
====================
These are maintained and released along with hledger.
* Menu:
* api::
* ui::
* web::
File: hledger.info, Node: api, Next: ui, Up: Official add-ons
5.1.1 api
---------
hledger-api serves hledger data as a JSON web API.
File: hledger.info, Node: ui, Next: web, Prev: api, Up: Official add-ons
5.1.2 ui
--------
hledger-ui provides an efficient curses-style interface.
File: hledger.info, Node: web, Prev: ui, Up: Official add-ons
5.1.3 web
---------
hledger-web provides a simple web interface.
File: hledger.info, Node: Third party add-ons, Next: Experimental add-ons, Prev: Official add-ons, Up: ADD-ON COMMANDS
5.2 Third party add-ons
=======================
These are maintained separately, and usually updated shortly after a
hledger release.
* Menu:
* diff::
* iadd::
* interest::
* irr::
File: hledger.info, Node: diff, Next: iadd, Up: Third party add-ons
5.2.1 diff
----------
hledger-diff shows differences in an account's transactions between one
journal file and another.
File: hledger.info, Node: iadd, Next: interest, Prev: diff, Up: Third party add-ons
5.2.2 iadd
----------
hledger-iadd is a curses-style, more interactive replacement for the add
command.
File: hledger.info, Node: interest, Next: irr, Prev: iadd, Up: Third party add-ons
5.2.3 interest
--------------
hledger-interest generates interest transactions for an account
according to various schemes.
File: hledger.info, Node: irr, Prev: interest, Up: Third party add-ons
5.2.4 irr
---------
hledger-irr calculates the internal rate of return of an investment
account.
File: hledger.info, Node: Experimental add-ons, Prev: Third party add-ons, Up: ADD-ON COMMANDS
5.3 Experimental add-ons
========================
These are available in source form in the hledger repo's bin/ directory;
installing them is pretty easy. They may be less mature and documented
than built-in commands. Reading and tweaking these is a good way to
start making your own!
* Menu:
* autosync::
* budget::
* chart::
* check::
File: hledger.info, Node: autosync, Next: budget, Up: Experimental add-ons
5.3.1 autosync
--------------
hledger-autosync is a symbolic link for easily running ledger-autosync,
if installed. ledger-autosync does deduplicating conversion of OFX data
and some CSV formats, and can also download the data if your bank offers
OFX Direct Connect.
File: hledger.info, Node: budget, Next: chart, Prev: autosync, Up: Experimental add-ons
5.3.2 budget
------------
hledger-budget.hs adds more budget-tracking features to hledger.
File: hledger.info, Node: chart, Next: check, Prev: budget, Up: Experimental add-ons
5.3.3 chart
-----------
hledger-chart.hs is an old pie chart generator, in need of some love.
File: hledger.info, Node: check, Prev: chart, Up: Experimental add-ons
5.3.4 check
-----------
hledger-check.hs checks more powerful account balance assertions.
Tag Table:
Node: Top68
Node: EXAMPLES1882
Ref: #examples1982
Node: OPTIONS3628
Ref: #options3730
Node: General options4054
Ref: #general-options4179
Node: Command options6730
Ref: #command-options6881
Node: Command arguments7279
Ref: #command-arguments7433
Node: Argument files7554
Ref: #argument-files7705
Node: Special characters7971
Ref: #special-characters8124
Node: Input files9543
Ref: #input-files9679
Node: Smart dates11649
Ref: #smart-dates11790
Node: Report start & end date12769
Ref: #report-start-end-date12939
Node: Report intervals14004
Ref: #report-intervals14167
Node: Period expressions14568
Ref: #period-expressions14728
Node: Depth limiting18685
Ref: #depth-limiting18829
Node: Pivoting19171
Ref: #pivoting19289
Node: Cost20965
Ref: #cost21073
Node: Market value21191
Ref: #market-value21326
Node: Combining -B and -V22509
Ref: #combining--b-and--v22673
Node: Regular expressions22820
Ref: #regular-expressions22963
Node: QUERIES24324
Ref: #queries24426
Node: COMMANDS28393
Ref: #commands28505
Node: accounts29488
Ref: #accounts29586
Node: activity30579
Ref: #activity30689
Node: add31049
Ref: #add31148
Node: balance33809
Ref: #balance33920
Node: Flat mode37294
Ref: #flat-mode37419
Node: Depth limited balance reports37839
Ref: #depth-limited-balance-reports38040
Node: Multicolumn balance reports38460
Ref: #multicolumn-balance-reports38655
Node: Budgets43344
Ref: #budgets43491
Node: Custom balance output47322
Ref: #custom-balance-output47484
Node: Colour support49577
Ref: #colour-support49736
Node: Output destination49909
Ref: #output-destination50065
Node: CSV output50335
Ref: #csv-output50452
Node: balancesheet50849
Ref: #balancesheet50985
Node: balancesheetequity52953
Ref: #balancesheetequity53102
Node: cashflow53891
Ref: #cashflow54019
Node: check-dates55931
Ref: #check-dates56058
Node: check-dupes56175
Ref: #check-dupes56300
Node: equity56437
Ref: #equity56547
Node: help56710
Ref: #help56811
Node: import57885
Ref: #import57999
Node: incomestatement58729
Ref: #incomestatement58863
Node: prices60816
Ref: #prices60931
Node: print60974
Ref: #print61084
Node: print-unique65969
Ref: #print-unique66095
Node: register66163
Ref: #register66290
Node: Custom register output70791
Ref: #custom-register-output70920
Node: register-match72217
Ref: #register-match72351
Node: rewrite72534
Ref: #rewrite72651
Node: stats72720
Ref: #stats72823
Node: tags73705
Ref: #tags73803
Node: test74039
Ref: #test74123
Node: ADD-ON COMMANDS74491
Ref: #add-on-commands74601
Node: Official add-ons75888
Ref: #official-add-ons76028
Node: api76115
Ref: #api76204
Node: ui76256
Ref: #ui76355
Node: web76413
Ref: #web76502
Node: Third party add-ons76548
Ref: #third-party-add-ons76723
Node: diff76858
Ref: #diff76955
Node: iadd77054
Ref: #iadd77168
Node: interest77251
Ref: #interest77372
Node: irr77467
Ref: #irr77565
Node: Experimental add-ons77643
Ref: #experimental-add-ons77795
Node: autosync78086
Ref: #autosync78198
Node: budget78437
Ref: #budget78559
Node: chart78625
Ref: #chart78742
Node: check78813
Ref: #check78915
End Tag Table