hledger-1.27: embeddedfiles/hledger-web.info
This is hledger-web.info, produced by makeinfo version 6.8 from stdin.
INFO-DIR-SECTION User Applications
START-INFO-DIR-ENTRY
* hledger-web: (hledger-web). Web UI/API for the hledger accounting tool.
END-INFO-DIR-ENTRY
File: hledger-web.info, Node: Top, Next: OPTIONS, Up: (dir)
hledger-web(1)
**************
hledger-web is a web interface (WUI) for the hledger accounting tool.
This manual is for hledger-web 1.27.
'hledger-web [OPTIONS]'
'hledger web -- [OPTIONS]'
hledger is a reliable, cross-platform set of programs for tracking
money, time, or any other commodity, using double-entry accounting and a
simple, editable file format. hledger is inspired by and largely
compatible with ledger(1).
hledger-web is hledger's web interface. It starts a simple web
application for browsing and adding transactions, and optionally opens
it in a web browser window if possible. It provides a more
user-friendly UI than the hledger CLI or hledger-ui interface, showing
more at once (accounts, the current account register, balance charts)
and allowing history-aware data entry, interactive searching, and
bookmarking.
hledger-web also lets you share a ledger with multiple users, or even
the public web. There is no access control, so if you need that you
should put it behind a suitable web proxy. As a small protection
against data loss when running an unprotected instance, it writes a
numbered backup of the main journal file (only ?) on every edit.
Like hledger, it reads data from one or more files in hledger
journal, timeclock, timedot, or CSV format specified with '-f', or
'$LEDGER_FILE', or '$HOME/.hledger.journal' (on windows, perhaps
'C:/Users/USER/.hledger.journal'). For more about this see hledger(1).
* Menu:
* OPTIONS::
* PERMISSIONS::
* EDITING UPLOADING DOWNLOADING::
* RELOADING::
* JSON API::
* ENVIRONMENT::
* FILES::
* BUGS::
File: hledger-web.info, Node: OPTIONS, Next: PERMISSIONS, Prev: Top, Up: Top
1 OPTIONS
*********
Command-line options and arguments may be used to set an initial filter
on the data. These filter options are not shown in the web UI, but it
will be applied in addition to any search query entered there.
Note: if invoking hledger-web as a hledger subcommand, write '--'
before options, as shown in the synopsis above.
'--serve'
serve and log requests, don't browse or auto-exit
'--serve-api'
like -serve, but serve only the JSON web API, without the
server-side web UI
'--host=IPADDR'
listen on this IP address (default: 127.0.0.1)
'--port=PORT'
listen on this TCP port (default: 5000)
'--socket=SOCKETFILE'
use a unix domain socket file to listen for requests instead of a
TCP socket. Implies '--serve'. It can only be used if the
operating system can provide this type of socket.
'--base-url=URL'
set the base url (default: http://IPADDR:PORT). You would change
this when sharing over the network, or integrating within a larger
website.
'--file-url=URL'
set the static files url (default: BASEURL/static). hledger-web
normally serves static files itself, but if you wanted to serve
them from another server for efficiency, you would set the url with
this.
'--capabilities=CAP[,CAP..]'
enable the view, add, and/or manage capabilities (default:
view,add)
'--capabilities-header=HTTPHEADER'
read capabilities to enable from a HTTP header, like
X-Sandstorm-Permissions (default: disabled)
'--test'
run hledger-web's tests and exit. hspec test runner args may
follow a -, eg: hledger-web -test - -help
hledger input options:
'-f FILE --file=FILE'
use a different input file. For stdin, use - (default:
'$LEDGER_FILE' or '$HOME/.hledger.journal')
'--rules-file=RULESFILE'
Conversion rules file to use when reading CSV (default: FILE.rules)
'--separator=CHAR'
Field separator to expect when reading CSV (default: ',')
'--alias=OLD=NEW'
rename accounts named OLD to NEW
'--anon'
anonymize accounts and payees
'--pivot FIELDNAME'
use some other field or tag for the account name
'-I --ignore-assertions'
disable balance assertion checks (note: does not disable balance
assignments)
'-s --strict'
do extra error checking (check that all posted accounts are
declared)
hledger reporting options:
'-b --begin=DATE'
include postings/txns on or after this date (will be adjusted to
preceding subperiod start when using a report interval)
'-e --end=DATE'
include postings/txns before this date (will be adjusted to
following subperiod end when using a report interval)
'-D --daily'
multiperiod/multicolumn report by day
'-W --weekly'
multiperiod/multicolumn report by week
'-M --monthly'
multiperiod/multicolumn report by month
'-Q --quarterly'
multiperiod/multicolumn report by quarter
'-Y --yearly'
multiperiod/multicolumn report by year
'-p --period=PERIODEXP'
set start date, end date, and/or reporting interval all at once
using period expressions syntax
'--date2'
match the secondary date instead (see command help for other
effects)
'--today=DATE'
override today's date (affects relative smart dates, for
tests/examples)
'-U --unmarked'
include only unmarked postings/txns (can combine with -P or -C)
'-P --pending'
include only pending postings/txns
'-C --cleared'
include only cleared postings/txns
'-R --real'
include only non-virtual postings
'-NUM --depth=NUM'
hide/aggregate accounts or postings more than NUM levels deep
'-E --empty'
show items with zero amount, normally hidden (and vice-versa in
hledger-ui/hledger-web)
'-B --cost'
convert amounts to their cost/selling amount at transaction time
'-V --market'
convert amounts to their market value in default valuation
commodities
'-X --exchange=COMM'
convert amounts to their market value in commodity COMM
'--value'
convert amounts to cost or market value, more flexibly than
-B/-V/-X
'--infer-market-prices'
use transaction prices (recorded with @ or @@) as additional market
prices, as if they were P directives
'--auto'
apply automated posting rules to modify transactions.
'--forecast'
generate future transactions from periodic transaction rules, for
the next 6 months or till report end date. In hledger-ui, also
make ordinary future transactions visible.
'--commodity-style'
Override the commodity style in the output for the specified
commodity. For example 'EUR1.000,00'.
'--color=WHEN (or --colour=WHEN)'
Should color-supporting commands use ANSI color codes in text
output. 'auto' (default): whenever stdout seems to be a
color-supporting terminal. 'always' or 'yes': always, useful eg
when piping output into 'less -R'. 'never' or 'no': never. A
NO_COLOR environment variable overrides this.
'--pretty[=WHEN]'
Show prettier output, e.g. using unicode box-drawing characters.
Accepts 'yes' (the default) or 'no' ('y', 'n', 'always', 'never'
also work). If you provide an argument you must use '=', e.g.
'-pretty=yes'.
When a reporting option appears more than once in the command line,
the last one takes precedence.
Some reporting options can also be written as query arguments.
hledger help options:
'-h --help'
show general or COMMAND help
'--man'
show general or COMMAND user manual with man
'--info'
show general or COMMAND user manual with info
'--version'
show general or ADDONCMD version
'--debug[=N]'
show debug output (levels 1-9, default: 1)
A @FILE argument will be expanded to the contents of FILE, which
should contain one command line option/argument per line. (To prevent
this, insert a '--' argument before.)
By default, hledger-web starts the web app in "transient mode" and
also opens it in your default web browser if possible. In this mode the
web app will keep running for as long as you have it open in a browser
window, and will exit after two minutes of inactivity (no requests and
no browser windows viewing it). With '--serve', it just runs the web
app without exiting, and logs requests to the console. With
'--serve-api', only the JSON web api (see below) is served, with the
usual HTML server-side web UI disabled.
By default the server listens on IP address 127.0.0.1, accessible
only to local requests. You can use '--host' to change this, eg '--host
0.0.0.0' to listen on all configured addresses.
Similarly, use '--port' to set a TCP port other than 5000, eg if you
are running multiple hledger-web instances.
Both of these options are ignored when '--socket' is used. In this
case, it creates an 'AF_UNIX' socket file at the supplied path and uses
that for communication. This is an alternative way of running multiple
hledger-web instances behind a reverse proxy that handles authentication
for different users. The path can be derived in a predictable way, eg
by using the username within the path. As an example, 'nginx' as
reverse proxy can use the variable '$remote_user' to derive a path from
the username used in a HTTP basic authentication. The following
'proxy_pass' directive allows access to all 'hledger-web' instances that
created a socket in '/tmp/hledger/':
proxy_pass http://unix:/tmp/hledger/${remote_user}.socket;
You can use '--base-url' to change the protocol, hostname, port and
path that appear in hyperlinks, useful eg for integrating hledger-web
within a larger website. The default is 'http://HOST:PORT/' using the
server's configured host address and TCP port (or 'http://HOST' if PORT
is 80).
With '--file-url' you can set a different base url for static files,
eg for better caching or cookie-less serving on high performance
websites.
File: hledger-web.info, Node: PERMISSIONS, Next: EDITING UPLOADING DOWNLOADING, Prev: OPTIONS, Up: Top
2 PERMISSIONS
*************
By default, hledger-web allows anyone who can reach it to view the
journal and to add new transactions, but not to change existing data.
You can restrict who can reach it by
* setting the IP address it listens on (see '--host' above). By
default it listens on 127.0.0.1, accessible to all users on the
local machine.
* putting it behind an authenticating proxy, using eg apache or nginx
* custom firewall rules
You can restrict what the users who reach it can do, by
* using the '--capabilities=CAP[,CAP..]' flag when you start it,
enabling one or more of the following capabilities. The default
value is 'view,add':
* 'view' - allows viewing the journal file and all included
files
* 'add' - allows adding new transactions to the main journal
file
* 'manage' - allows editing, uploading or downloading the main
or included files
* using the '--capabilities-header=HTTPHEADER' flag to specify a HTTP
header from which it will read capabilities to enable. hledger-web
on Sandstorm uses the X-Sandstorm-Permissions header to integrate
with Sandstorm's permissions. This is disabled by default.
File: hledger-web.info, Node: EDITING UPLOADING DOWNLOADING, Next: RELOADING, Prev: PERMISSIONS, Up: Top
3 EDITING, UPLOADING, DOWNLOADING
*********************************
If you enable the 'manage' capability mentioned above, you'll see a new
"spanner" button to the right of the search form. Clicking this will
let you edit, upload, or download the journal file or any files it
includes.
Note, unlike any other hledger command, in this mode you (or any
visitor) can alter or wipe the data files.
Normally whenever a file is changed in this way, hledger-web saves a
numbered backup (assuming file permissions allow it, the disk is not
full, etc.) hledger-web is not aware of version control systems,
currently; if you use one, you'll have to arrange to commit the changes
yourself (eg with a cron job or a file watcher like entr).
Changes which would leave the journal file(s) unparseable or
non-valid (eg with failing balance assertions) are prevented.
(Probably. This needs re-testing.)
File: hledger-web.info, Node: RELOADING, Next: JSON API, Prev: EDITING UPLOADING DOWNLOADING, Up: Top
4 RELOADING
***********
hledger-web detects changes made to the files by other means (eg if you
edit it directly, outside of hledger-web), and it will show the new data
when you reload the page or navigate to a new page. If a change makes a
file unparseable, hledger-web will display an error message until the
file has been fixed.
(Note: if you are viewing files mounted from another machine, make
sure that both machine clocks are roughly in step.)
File: hledger-web.info, Node: JSON API, Next: ENVIRONMENT, Prev: RELOADING, Up: Top
5 JSON API
**********
In addition to the web UI, hledger-web also serves a JSON API that can
be used to get data or add new transactions. If you want the JSON API
only, you can use the '--serve-api' flag. Eg:
$ hledger-web -f examples/sample.journal --serve-api
...
You can get JSON data from these routes:
/version
/accountnames
/transactions
/prices
/commodities
/accounts
/accounttransactions/ACCOUNTNAME
Eg, all account names in the journal (similar to the accounts
command). (hledger-web's JSON does not include newlines, here we use
python to prettify it):
$ curl -s http://127.0.0.1:5000/accountnames | python -m json.tool
[
"assets",
"assets:bank",
"assets:bank:checking",
"assets:bank:saving",
"assets:cash",
"expenses",
"expenses:food",
"expenses:supplies",
"income",
"income:gifts",
"income:salary",
"liabilities",
"liabilities:debts"
]
Or all transactions:
$ curl -s http://127.0.0.1:5000/transactions | python -m json.tool
[
{
"tcode": "",
"tcomment": "",
"tdate": "2008-01-01",
"tdate2": null,
"tdescription": "income",
"tindex": 1,
"tpostings": [
{
"paccount": "assets:bank:checking",
"pamount": [
{
"acommodity": "$",
"aismultiplier": false,
"aprice": null,
...
Most of the JSON corresponds to hledger's data types; for details of
what the fields mean, see the Hledger.Data.Json haddock docs and click
on the various data types, eg Transaction. And for a higher level
understanding, see the journal manual.
In some cases there is outer JSON corresponding to a "Report" type.
To understand that, go to the Hledger.Web.Handler.MiscR haddock and look
at the source for the appropriate handler to see what it returns. Eg
for '/accounttransactions' it's getAccounttransactionsR, returning a
"'accountTransactionsReport ...'". Looking up the haddock for that we
can see that /accounttransactions returns an AccountTransactionsReport,
which consists of a report title and a list of
AccountTransactionsReportItem (etc).
You can add a new transaction to the journal with a PUT request to
'/add', if hledger-web was started with the 'add' capability (enabled by
default). The payload must be the full, exact JSON representation of a
hledger transaction (partial data won't do). You can get sample JSON
from hledger-web's '/transactions' or '/accounttransactions', or you can
export it with hledger-lib, eg like so:
.../hledger$ stack ghci hledger-lib
>>> writeJsonFile "txn.json" (head $ jtxns samplejournal)
>>> :q
Here's how it looks as of hledger-1.17 (remember, this JSON
corresponds to hledger's Transaction and related data types):
{
"tcomment": "",
"tpostings": [
{
"pbalanceassertion": null,
"pstatus": "Unmarked",
"pamount": [
{
"aprice": null,
"acommodity": "$",
"aquantity": {
"floatingPoint": 1,
"decimalPlaces": 10,
"decimalMantissa": 10000000000
},
"aismultiplier": false,
"astyle": {
"ascommodityside": "L",
"asdigitgroups": null,
"ascommodityspaced": false,
"asprecision": 2,
"asdecimalpoint": "."
}
}
],
"ptransaction_": "1",
"paccount": "assets:bank:checking",
"pdate": null,
"ptype": "RegularPosting",
"pcomment": "",
"pdate2": null,
"ptags": [],
"poriginal": null
},
{
"pbalanceassertion": null,
"pstatus": "Unmarked",
"pamount": [
{
"aprice": null,
"acommodity": "$",
"aquantity": {
"floatingPoint": -1,
"decimalPlaces": 10,
"decimalMantissa": -10000000000
},
"aismultiplier": false,
"astyle": {
"ascommodityside": "L",
"asdigitgroups": null,
"ascommodityspaced": false,
"asprecision": 2,
"asdecimalpoint": "."
}
}
],
"ptransaction_": "1",
"paccount": "income:salary",
"pdate": null,
"ptype": "RegularPosting",
"pcomment": "",
"pdate2": null,
"ptags": [],
"poriginal": null
}
],
"ttags": [],
"tsourcepos": {
"tag": "JournalSourcePos",
"contents": [
"",
[
1,
1
]
]
},
"tdate": "2008-01-01",
"tcode": "",
"tindex": 1,
"tprecedingcomment": "",
"tdate2": null,
"tdescription": "income",
"tstatus": "Unmarked"
}
And here's how to test adding it with curl. This should add a new
entry to your journal:
$ curl http://127.0.0.1:5000/add -X PUT -H 'Content-Type: application/json' --data-binary @txn.json
File: hledger-web.info, Node: ENVIRONMENT, Next: FILES, Prev: JSON API, Up: Top
6 ENVIRONMENT
*************
*LEDGER_FILE* The journal file path when not specified with '-f'.
On unix computers, the default value is: '~/.hledger.journal'.
A more typical value is something like '~/finance/YYYY.journal',
where '~/finance' is a version-controlled finance directory and YYYY is
the current year. Or, '~/finance/current.journal', where
current.journal is a symbolic link to YYYY.journal.
The usual way to set this permanently is to add a command to one of
your shell's startup files (eg '~/.profile'):
export LEDGER_FILE=~/finance/current.journal`
On some Mac computers, there is a more thorough way to set
environment variables, that will also affect applications started from
the GUI (eg, Emacs started from a dock icon): In
'~/.MacOSX/environment.plist', add an entry like:
{
"LEDGER_FILE" : "~/finance/current.journal"
}
For this to take effect you might need to 'killall Dock', or reboot.
On Windows computers, the default value is probably
'C:\Users\YOURNAME\.hledger.journal'. You can change this by running a
command like this in a powershell window (let us know if you need to be
an Administrator, and if this persists across a reboot):
> setx LEDGER_FILE "C:\Users\MyUserName\finance\2021.journal"
Or, change it in settings: see
https://www.java.com/en/download/help/path.html.
File: hledger-web.info, Node: FILES, Next: BUGS, Prev: ENVIRONMENT, Up: Top
7 FILES
*******
Reads data from one or more files in hledger journal, timeclock,
timedot, or CSV format specified with '-f', or '$LEDGER_FILE', or
'$HOME/.hledger.journal' (on windows, perhaps
'C:/Users/USER/.hledger.journal').
File: hledger-web.info, Node: BUGS, Prev: FILES, Up: Top
8 BUGS
******
The need to precede options with '--' when invoked from hledger is
awkward.
'-f-' doesn't work (hledger-web can't read from stdin).
Query arguments and some hledger options are ignored.
Does not work in text-mode browsers.
Does not work well on small screens.
Tag Table:
Node: Top223
Node: OPTIONS1886
Ref: #options1991
Node: PERMISSIONS9902
Ref: #permissions10041
Node: EDITING UPLOADING DOWNLOADING11253
Ref: #editing-uploading-downloading11434
Node: RELOADING12268
Ref: #reloading12402
Node: JSON API12835
Ref: #json-api12949
Node: ENVIRONMENT18439
Ref: #environment18555
Node: FILES19866
Ref: #files19966
Node: BUGS20179
Ref: #bugs20257
End Tag Table
Local Variables:
coding: utf-8
End: