hledger-lib-1.2: doc/hledger_journal.5.info
This is hledger_journal.5.info, produced by makeinfo version 6.0 from
stdin.
File: hledger_journal.5.info, Node: Top, Next: FILE FORMAT, Up: (dir)
hledger_journal(5) hledger 1.2
******************************
hledger's usual data source is a plain text file containing journal
entries in hledger journal format. This file represents a standard
accounting general journal. I use file names ending in '.journal', but
that's not required. The journal file contains a number of transaction
entries, each describing a transfer of money (or any commodity) between
two or more named accounts, in a simple format readable by both hledger
and humans.
hledger's journal format is a compatible subset, mostly, of ledger's
journal format, so hledger can work with compatible ledger journal files
as well. It's safe, and encouraged, to run both hledger and ledger on
the same journal file, eg to validate the results you're getting.
You can use hledger without learning any more about this file; just
use the add or web commands to create and update it. Many users,
though, also edit the journal file directly with a text editor, perhaps
assisted by the helper modes for emacs or vim.
Here's an example:
; A sample journal file. This is a comment.
2008/01/01 income ; <- transaction's first line starts in column 0, contains date and description
assets:bank:checking $1 ; <- posting lines start with whitespace, each contains an account name
income:salary $-1 ; followed by at least two spaces and an amount
2008/06/01 gift
assets:bank:checking $1 ; <- at least two postings in a transaction
income:gifts $-1 ; <- their amounts must balance to 0
2008/06/02 save
assets:bank:saving $1
assets:bank:checking ; <- one amount may be omitted; here $-1 is inferred
2008/06/03 eat & shop ; <- description can be anything
expenses:food $1
expenses:supplies $1 ; <- this transaction debits two expense accounts
assets:cash ; <- $-2 inferred
2008/12/31 * pay off ; <- an optional * or ! after the date means "cleared" (or anything you want)
liabilities:debts $1
assets:bank:checking
* Menu:
* FILE FORMAT::
* EDITOR SUPPORT::
File: hledger_journal.5.info, Node: FILE FORMAT, Next: EDITOR SUPPORT, Prev: Top, Up: Top
1 FILE FORMAT
*************
* Menu:
* Transactions::
* Dates::
* Account names::
* Amounts::
* Virtual Postings::
* Balance Assertions::
* Balance Assignments::
* Prices::
* Comments::
* Tags::
* Directives::
File: hledger_journal.5.info, Node: Transactions, Next: Dates, Up: FILE FORMAT
1.1 Transactions
================
Transactions are represented by journal entries. Each begins with a
simple date in column 0, followed by three optional fields with spaces
between them:
* a status flag, which can be empty or '!' or '*' (meaning
"uncleared", "pending" and "cleared", or whatever you want)
* a transaction code (eg a check number),
* and/or a description
then some number of postings, of some amount to some account. Each
posting is on its own line, consisting of:
* indentation of one or more spaces (or tabs)
* optionally, a '!' or '*' status flag followed by a space
* an account name, optionally containing single spaces
* optionally, two or more spaces or tabs followed by an amount
Usually there are two or more postings, though one or none is also
possible. The posting amounts within a transaction must always balance,
ie add up to 0. Optionally one amount can be left blank, in which case
it will be inferred.
File: hledger_journal.5.info, Node: Dates, Next: Account names, Prev: Transactions, Up: FILE FORMAT
1.2 Dates
=========
* Menu:
* Simple dates::
* Secondary dates::
* Posting dates::
File: hledger_journal.5.info, Node: Simple dates, Next: Secondary dates, Up: Dates
1.2.1 Simple dates
------------------
Within a journal file, transaction dates use Y/M/D (or Y-M-D or Y.M.D)
Leading zeros are optional. The year may be omitted, in which case it
will be inferred from the context - the current transaction, the default
year set with a default year directive, or the current date when the
command is run. Some examples: '2010/01/31', '1/31', '2010-01-31',
'2010.1.31'.
File: hledger_journal.5.info, Node: Secondary dates, Next: Posting dates, Prev: Simple dates, Up: Dates
1.2.2 Secondary dates
---------------------
Real-life transactions sometimes involve more than one date - eg the
date you write a cheque, and the date it clears in your bank. When you
want to model this, eg for more accurate balances, you can specify
individual posting dates, which I recommend. Or, you can use the
secondary dates (aka auxiliary/effective dates) feature, supported for
compatibility with Ledger.
A secondary date can be written after the primary date, separated by
an equals sign. The primary date, on the left, is used by default; the
secondary date, on the right, is used when the '--date2' flag is
specified ('--aux-date' or '--effective' also work).
The meaning of secondary dates is up to you, but it's best to follow
a consistent rule. Eg write the bank's clearing date as primary, and
when needed, the date the transaction was initiated as secondary.
Here's an example. Note that a secondary date will use the year of
the primary date if unspecified.
2010/2/23=2/19 movie ticket
expenses:cinema $10
assets:checking
$ hledger register checking
2010/02/23 movie ticket assets:checking $-10 $-10
$ hledger register checking --date2
2010/02/19 movie ticket assets:checking $-10 $-10
Secondary dates require some effort; you must use them consistently
in your journal entries and remember whether to use or not use the
'--date2' flag for your reports. They are included in hledger for
Ledger compatibility, but posting dates are a more powerful and less
confusing alternative.
File: hledger_journal.5.info, Node: Posting dates, Prev: Secondary dates, Up: Dates
1.2.3 Posting dates
-------------------
You can give individual postings a different date from their parent
transaction, by adding a posting comment containing a tag (see below)
like 'date:DATE'. This is probably the best way to control posting
dates precisely. Eg in this example the expense should appear in May
reports, and the deduction from checking should be reported on 6/1 for
easy bank reconciliation:
2015/5/30
expenses:food $10 ; food purchased on saturday 5/30
assets:checking ; bank cleared it on monday, date:6/1
$ hledger -f t.j register food
2015/05/30 expenses:food $10 $10
$ hledger -f t.j register checking
2015/06/01 assets:checking $-10 $-10
DATE should be a simple date; if the year is not specified it will
use the year of the transaction's date. You can set the secondary date
similarly, with 'date2:DATE2'. The 'date:' or 'date2:' tags must have a
valid simple date value if they are present, eg a 'date:' tag with no
value is not allowed.
Ledger's earlier, more compact bracketed date syntax is also
supported: '[DATE]', '[DATE=DATE2]' or '[=DATE2]'. hledger will attempt
to parse any square-bracketed sequence of the '0123456789/-.='
characters in this way. With this syntax, DATE infers its year from the
transaction and DATE2 infers its year from DATE.
File: hledger_journal.5.info, Node: Account names, Next: Amounts, Prev: Dates, Up: FILE FORMAT
1.3 Account names
=================
Account names typically have several parts separated by a full colon,
from which hledger derives a hierarchical chart of accounts. They can
be anything you like, but in finance there are traditionally five
top-level accounts: 'assets', 'liabilities', 'income', 'expenses', and
'equity'.
Account names may contain single spaces, eg: 'assets:accounts
receivable'. Because of this, they must always be followed by *two or
more spaces* (or newline).
Account names can be aliased.
File: hledger_journal.5.info, Node: Amounts, Next: Virtual Postings, Prev: Account names, Up: FILE FORMAT
1.4 Amounts
===========
After the account name, there is usually an amount. Important: between
account name and amount, there must be *two or more spaces*.
Amounts consist of a number and (usually) a currency symbol or
commodity name. Some examples:
'2.00001'
'$1'
'4000 AAPL'
'3 "green apples"'
'-$1,000,000.00'
'INR 9,99,99,999.00'
'EUR -2.000.000,00'
As you can see, the amount format is somewhat flexible:
* amounts are a number (the "quantity") and optionally a currency
symbol/commodity name (the "commodity").
* the commodity is a symbol, word, or phrase, on the left or right,
with or without a separating space. If the commodity contains
numbers, spaces or non-word punctuation it must be enclosed in
double quotes.
* negative amounts with a commodity on the left can have the minus
sign before or after it
* digit groups (thousands, or any other grouping) can be separated by
commas (in which case period is used for decimal point) or periods
(in which case comma is used for decimal point)
You can use any of these variations when recording data, but when
hledger displays amounts, it will choose a consistent format for each
commodity. (Except for price amounts, which are always formatted as
written). The display format is chosen as follows:
* if there is a commodity directive specifying the format, that is
used
* otherwise the format is inferred from the first posting amount in
that commodity in the journal, and the precision (number of decimal
places) will be the maximum from all posting amounts in that
commmodity
* or if there are no such amounts in the journal, a default format is
used (like '$1000.00').
Price amounts and amounts in D directives usually don't affect amount
format inference, but in some situations they can do so indirectly. (Eg
when D's default commodity is applied to a commodity-less amount, or
when an amountless posting is balanced using a price's commodity, or
when -V is used.) If you find this causing problems, set the desired
format with a commodity directive.
File: hledger_journal.5.info, Node: Virtual Postings, Next: Balance Assertions, Prev: Amounts, Up: FILE FORMAT
1.5 Virtual Postings
====================
When you parenthesise the account name in a posting, we call that a
_virtual posting_, which means:
* it is ignored when checking that the transaction is balanced
* it is excluded from reports when the '--real/-R' flag is used, or
the 'real:1' query.
You could use this, eg, to set an account's opening balance without
needing to use the 'equity:opening balances' account:
1/1 special unbalanced posting to set initial balance
(assets:checking) $1000
When the account name is bracketed, we call it a _balanced virtual
posting_. This is like an ordinary virtual posting except the balanced
virtual postings in a transaction must balance to 0, like the real
postings (but separately from them). Balanced virtual postings are also
excluded by '--real/-R' or 'real:1'.
1/1 buy food with cash, and update some budget-tracking subaccounts elsewhere
expenses:food $10
assets:cash $-10
[assets:checking:available] $10
[assets:checking:budget:food] $-10
Virtual postings have some legitimate uses, but those are few. You
can usually find an equivalent journal entry using real postings, which
is more correct and provides better error checking.
File: hledger_journal.5.info, Node: Balance Assertions, Next: Balance Assignments, Prev: Virtual Postings, Up: FILE FORMAT
1.6 Balance Assertions
======================
hledger supports Ledger-style balance assertions in journal files.
These look like '=EXPECTEDBALANCE' following a posting's amount. Eg in
this example we assert the expected dollar balance in accounts a and b
after each posting:
2013/1/1
a $1 =$1
b =$-1
2013/1/2
a $1 =$2
b $-1 =$-2
After reading a journal file, hledger will check all balance
assertions and report an error if any of them fail. Balance assertions
can protect you from, eg, inadvertently disrupting reconciled balances
while cleaning up old entries. You can disable them temporarily with
the '--ignore-assertions' flag, which can be useful for troubleshooting
or for reading Ledger files.
* Menu:
* Assertions and ordering::
* Assertions and included files::
* Assertions and multiple -f options::
* Assertions and commodities::
* Assertions and subaccounts::
* Assertions and virtual postings::
File: hledger_journal.5.info, Node: Assertions and ordering, Next: Assertions and included files, Up: Balance Assertions
1.6.1 Assertions and ordering
-----------------------------
hledger sorts an account's postings and assertions first by date and
then (for postings on the same day) by parse order. Note this is
different from Ledger, which sorts assertions only by parse order.
(Also, Ledger assertions do not see the accumulated effect of repeated
postings to the same account within a transaction.)
So, hledger balance assertions keep working if you reorder
differently-dated transactions within the journal. But if you reorder
same-dated transactions or postings, assertions might break and require
updating. This order dependence does bring an advantage: precise
control over the order of postings and assertions within a day, so you
can assert intra-day balances.
File: hledger_journal.5.info, Node: Assertions and included files, Next: Assertions and multiple -f options, Prev: Assertions and ordering, Up: Balance Assertions
1.6.2 Assertions and included files
-----------------------------------
With included files, things are a little more complicated. Including
preserves the ordering of postings and assertions. If you have multiple
postings to an account on the same day, split across different files,
and you also want to assert the account's balance on the same day,
you'll have to put the assertion in the right file.
File: hledger_journal.5.info, Node: Assertions and multiple -f options, Next: Assertions and commodities, Prev: Assertions and included files, Up: Balance Assertions
1.6.3 Assertions and multiple -f options
----------------------------------------
Balance assertions don't work well across files specified with multiple
-f options. Use include or concatenate the files instead.
File: hledger_journal.5.info, Node: Assertions and commodities, Next: Assertions and subaccounts, Prev: Assertions and multiple -f options, Up: Balance Assertions
1.6.4 Assertions and commodities
--------------------------------
The asserted balance must be a simple single-commodity amount, and in
fact the assertion checks only this commodity's balance within the
(possibly multi-commodity) account balance. We could call this a
partial balance assertion. This is compatible with Ledger, and makes it
possible to make assertions about accounts containing multiple
commodities.
To assert each commodity's balance in such a multi-commodity account,
you can add multiple postings (with amount 0 if necessary). But note
that no matter how many assertions you add, you can't be sure the
account does not contain some unexpected commodity. (We'll add support
for this kind of total balance assertion if there's demand.)
File: hledger_journal.5.info, Node: Assertions and subaccounts, Next: Assertions and virtual postings, Prev: Assertions and commodities, Up: Balance Assertions
1.6.5 Assertions and subaccounts
--------------------------------
Balance assertions do not count the balance from subaccounts; they check
the posted account's exclusive balance. For example:
1/1
checking:fund 1 = 1 ; post to this subaccount, its balance is now 1
checking 1 = 1 ; post to the parent account, its exclusive balance is now 1
equity
The balance report's flat mode shows these exclusive balances more
clearly:
$ hledger bal checking --flat
1 checking
1 checking:fund
--------------------
2
File: hledger_journal.5.info, Node: Assertions and virtual postings, Prev: Assertions and subaccounts, Up: Balance Assertions
1.6.6 Assertions and virtual postings
-------------------------------------
Balance assertions are checked against all postings, both real and
virtual. They are not affected by the '--real/-R' flag or 'real:'
query.
File: hledger_journal.5.info, Node: Balance Assignments, Next: Prices, Prev: Balance Assertions, Up: FILE FORMAT
1.7 Balance Assignments
=======================
Ledger-style balance assignments are also supported. These are like
balance assertions, but with no posting amount on the left side of the
equals sign; instead it is calculated automatically so as to satisfy the
assertion. This can be a convenience during data entry, eg when setting
opening balances:
; starting a new journal, set asset account balances
2016/1/1 opening balances
assets:checking = $409.32
assets:savings = $735.24
assets:cash = $42
equity:opening balances
or when adjusting a balance to reality:
; no cash left; update balance, record any untracked spending as a generic expense
2016/1/15
assets:cash = $0
expenses:misc
The calculated amount depends on the account's balance in the
commodity at that point (which depends on the previously-dated postings
of the commodity to that account since the last balance assertion or
assignment). Note that using balance assignments makes your journal a
little less explicit; to know the exact amount posted, you have to run
hledger or do the calculations yourself, instead of just reading it.
File: hledger_journal.5.info, Node: Prices, Next: Comments, Prev: Balance Assignments, Up: FILE FORMAT
1.8 Prices
==========
* Menu:
* Transaction prices::
* Market prices::
File: hledger_journal.5.info, Node: Transaction prices, Next: Market prices, Up: Prices
1.8.1 Transaction prices
------------------------
Within a transaction posting, you can record an amount's price in
another commodity. This can be used to document the cost (for a
purchase), or selling price (for a sale), or the exchange rate that was
used, for this transaction. These transaction prices are fixed, and do
not change over time.
Amounts with transaction prices can be displayed in the transaction
price's commodity, by using the '--cost/-B' flag supported by most
hledger commands (mnemonic: "cost Basis").
There are several ways to record a transaction price:
1. Write the unit price (aka exchange rate), as '@ UNITPRICE' after
the amount:
2009/1/1
assets:foreign currency €100 @ $1.35 ; one hundred euros at $1.35 each
assets:cash
2. Or write the total price, as '@@ TOTALPRICE' after the amount:
2009/1/1
assets:foreign currency €100 @@ $135 ; one hundred euros at $135 for the lot
assets:cash
3. Or let hledger infer the price so as to balance the transaction.
To permit this, you must fully specify all posting amounts, and
their sum must have a non-zero amount in exactly two commodities:
2009/1/1
assets:foreign currency €100 ; one hundred euros
assets:cash $-135 ; exchanged for $135
With any of the above examples we get:
$ hledger print -B
2009/01/01
assets:foreign currency $135.00
assets:cash $-135.00
Example use for transaction prices: recording the effective
conversion rate of purchases made in a foreign currency.
File: hledger_journal.5.info, Node: Market prices, Prev: Transaction prices, Up: Prices
1.8.2 Market prices
-------------------
Market prices are not tied to a particular transaction; they represent
historical exchange rates between two commodities. (Ledger calls them
historical prices.) For example, the prices published by a stock
exchange or the foreign exchange market. Some commands (balance,
currently) can use this information to show the market value of things
at a given date.
To record market prices, use P directives in the main journal or in
an included file. Their format is:
P DATE COMMODITYBEINGPRICED UNITPRICE
DATE is a simple date as usual. COMMODITYBEINGPRICED is the symbol
of the commodity being priced. UNITPRICE is an ordinary amount (symbol
and quantity) in a second commodity, specifying the unit price or
conversion rate for the first commodity in terms of the second, on the
given date.
For example, the following directives say that one euro was worth
1.35 US dollars during 2009, and $1.40 from 2010 onward:
P 2009/1/1 € $1.35
P 2010/1/1 € $1.40
File: hledger_journal.5.info, Node: Comments, Next: Tags, Prev: Prices, Up: FILE FORMAT
1.9 Comments
============
Lines in the journal beginning with a semicolon (';') or hash ('#') or
asterisk ('*') are comments, and will be ignored. (Asterisk comments
make it easy to treat your journal like an org-mode outline in emacs.)
Also, anything between 'comment' and 'end comment' directives is a
(multi-line) comment. If there is no 'end comment', the comment extends
to the end of the file.
You can attach comments to a transaction by writing them after the
description and/or indented on the following lines (before the
postings). Similarly, you can attach comments to an individual posting
by writing them after the amount and/or indented on the following lines.
Some examples:
# a journal comment
; also a journal comment
comment
This is a multiline comment,
which continues until a line
where the "end comment" string
appears on its own.
end comment
2012/5/14 something ; a transaction comment
; the transaction comment, continued
posting1 1 ; a comment for posting 1
posting2
; a comment for posting 2
; another comment line for posting 2
; a journal comment (because not indented)
File: hledger_journal.5.info, Node: Tags, Next: Directives, Prev: Comments, Up: FILE FORMAT
1.10 Tags
=========
Tags are a way to add extra labels or labelled data to postings and
transactions, which you can then search or pivot on.
A simple tag is a word (which may contain hyphens) followed by a full
colon, written inside a transaction or posting comment line:
2017/1/16 bought groceries ; sometag:
Tags can have a value, which is the text after the colon, up to the
next comma or end of line, with leading/trailing whitespace removed:
expenses:food $10 ; a-posting-tag: the tag value
Note this means hledger's tag values can not contain commas or
newlines. Ending at commas means you can write multiple short tags on
one line, comma separated:
assets:checking ; a comment containing tag1:, tag2: some value ...
Here,
* "'a comment containing'" is just comment text, not a tag
* "'tag1'" is a tag with no value
* "'tag2'" is another tag, whose value is "'some value ...'"
Tags in a transaction comment affect the transaction and all of its
postings, while tags in a posting comment affect only that posting. For
example, the following transaction has three tags ('A', 'TAG2',
'third-tag') and the posting has four (those plus 'posting-tag'):
1/1 a transaction ; A:, TAG2:
; third-tag: a third transaction tag, <- with a value
(a) $1 ; posting-tag:
Tags are like Ledger's metadata feature, except hledger's tag values
are simple strings.
* Menu:
* Implicit tags::
File: hledger_journal.5.info, Node: Implicit tags, Up: Tags
1.10.1 Implicit tags
--------------------
Some predefined "implicit" tags are also provided:
* 'code' - the transaction's code field
* 'description' - the transaction's description
* 'payee' - the part of description before '|', or all of it
* 'note' - the part of description after '|', or all of it
'payee' and 'note' support descriptions written in a special 'PAYEE |
NOTE' format, accessing the parts before and after the pipe character
respectively. For descriptions not containing a pipe character they are
the same as 'description'.
File: hledger_journal.5.info, Node: Directives, Prev: Tags, Up: FILE FORMAT
1.11 Directives
===============
* Menu:
* Account aliases::
* account directive::
* apply account directive::
* Multi-line comments::
* commodity directive::
* Default commodity::
* Default year::
* Including other files::
File: hledger_journal.5.info, Node: Account aliases, Next: account directive, Up: Directives
1.11.1 Account aliases
----------------------
You can define aliases which rewrite your account names (after reading
the journal, before generating reports). hledger's account aliases can
be useful for:
* expanding shorthand account names to their full form, allowing
easier data entry and a less verbose journal
* adapting old journals to your current chart of accounts
* experimenting with new account organisations, like a new hierarchy
or combining two accounts into one
* customising reports
See also Cookbook: rewrite account names.
* Menu:
* Basic aliases::
* Regex aliases::
* Multiple aliases::
* end aliases::
File: hledger_journal.5.info, Node: Basic aliases, Next: Regex aliases, Up: Account aliases
1.11.1.1 Basic aliases
......................
To set an account alias, use the 'alias' directive in your journal file.
This affects all subsequent journal entries in the current file or its
included files. The spaces around the = are optional:
alias OLD = NEW
Or, you can use the '--alias 'OLD=NEW'' option on the command line.
This affects all entries. It's useful for trying out aliases
interactively.
OLD and NEW are full account names. hledger will replace any
occurrence of the old account name with the new one. Subaccounts are
also affected. Eg:
alias checking = assets:bank:wells fargo:checking
# rewrites "checking" to "assets:bank:wells fargo:checking", or "checking:a" to "assets:bank:wells fargo:checking:a"
File: hledger_journal.5.info, Node: Regex aliases, Next: Multiple aliases, Prev: Basic aliases, Up: Account aliases
1.11.1.2 Regex aliases
......................
There is also a more powerful variant that uses a regular expression,
indicated by the forward slashes. (This was the default behaviour in
hledger 0.24-0.25):
alias /REGEX/ = REPLACEMENT
or '--alias '/REGEX/=REPLACEMENT''.
REGEX is a case-insensitive regular expression. Anywhere it matches
inside an account name, the matched part will be replaced by
REPLACEMENT. If REGEX contains parenthesised match groups, these can be
referenced by the usual numeric backreferences in REPLACEMENT. Note,
currently regular expression aliases may cause noticeable slow-downs.
(And if you use Ledger on your hledger file, they will be ignored.) Eg:
alias /^(.+):bank:([^:]+)(.*)/ = \1:\2 \3
# rewrites "assets:bank:wells fargo:checking" to "assets:wells fargo checking"
File: hledger_journal.5.info, Node: Multiple aliases, Next: end aliases, Prev: Regex aliases, Up: Account aliases
1.11.1.3 Multiple aliases
.........................
You can define as many aliases as you like using directives or
command-line options. Aliases are recursive - each alias sees the
result of applying previous ones. (This is different from Ledger, where
aliases are non-recursive by default). Aliases are applied in the
following order:
1. alias directives, most recently seen first (recent directives take
precedence over earlier ones; directives not yet seen are ignored)
2. alias options, in the order they appear on the command line
File: hledger_journal.5.info, Node: end aliases, Prev: Multiple aliases, Up: Account aliases
1.11.1.4 end aliases
....................
You can clear (forget) all currently defined aliases with the 'end
aliases' directive:
end aliases
File: hledger_journal.5.info, Node: account directive, Next: apply account directive, Prev: Account aliases, Up: Directives
1.11.2 account directive
------------------------
The 'account' directive predefines account names, as in Ledger and
Beancount. This may be useful for your own documentation; hledger
doesn't make use of it yet.
; account ACCT
; OPTIONAL COMMENTS/TAGS...
account assets:bank:checking
a comment
acct-no:12345
account expenses:food
; etc.
File: hledger_journal.5.info, Node: apply account directive, Next: Multi-line comments, Prev: account directive, Up: Directives
1.11.3 apply account directive
------------------------------
You can specify a parent account which will be prepended to all accounts
within a section of the journal. Use the 'apply account' and 'end apply
account' directives like so:
apply account home
2010/1/1
food $10
cash
end apply account
which is equivalent to:
2010/01/01
home:food $10
home:cash $-10
If 'end apply account' is omitted, the effect lasts to the end of the
file. Included files are also affected, eg:
apply account business
include biz.journal
end apply account
apply account personal
include personal.journal
Prior to hledger 1.0, legacy 'account' and 'end' spellings were also
supported.
File: hledger_journal.5.info, Node: Multi-line comments, Next: commodity directive, Prev: apply account directive, Up: Directives
1.11.4 Multi-line comments
--------------------------
A line containing just 'comment' starts a multi-line comment, and a line
containing just 'end comment' ends it. See comments.
File: hledger_journal.5.info, Node: commodity directive, Next: Default commodity, Prev: Multi-line comments, Up: Directives
1.11.5 commodity directive
--------------------------
The 'commodity' directive predefines commodities (currently this is just
informational), and also it may define the display format for amounts in
this commodity (overriding the automatically inferred format).
It may be written on a single line, like this:
; commodity EXAMPLEAMOUNT
; display AAAA amounts with the symbol on the right, space-separated,
; using period as decimal point, with four decimal places, and
; separating thousands with comma.
commodity 1,000.0000 AAAA
or on multiple lines, using the "format" subdirective. In this case
the commodity symbol appears twice and should be the same in both
places:
; commodity SYMBOL
; format EXAMPLEAMOUNT
; display indian rupees with currency name on the left,
; thousands, lakhs and crores comma-separated,
; period as decimal point, and two decimal places.
commodity INR
format INR 9,99,99,999.00
File: hledger_journal.5.info, Node: Default commodity, Next: Default year, Prev: commodity directive, Up: Directives
1.11.6 Default commodity
------------------------
The D directive sets a default commodity (and display format), to be
used for amounts without a commodity symbol (ie, plain numbers). (Note
this differs from Ledger's default commodity directive.) The commodity
and display format will be applied to all subsequent commodity-less
amounts, or until the next D directive.
# commodity-less amounts should be treated as dollars
# (and displayed with symbol on the left, thousands separators and two decimal places)
D $1,000.00
1/1
a 5 # <- commodity-less amount, becomes $1
b
File: hledger_journal.5.info, Node: Default year, Next: Including other files, Prev: Default commodity, Up: Directives
1.11.7 Default year
-------------------
You can set a default year to be used for subsequent dates which don't
specify a year. This is a line beginning with 'Y' followed by the year.
Eg:
Y2009 ; set default year to 2009
12/15 ; equivalent to 2009/12/15
expenses 1
assets
Y2010 ; change default year to 2010
2009/1/30 ; specifies the year, not affected
expenses 1
assets
1/31 ; equivalent to 2010/1/31
expenses 1
assets
File: hledger_journal.5.info, Node: Including other files, Prev: Default year, Up: Directives
1.11.8 Including other files
----------------------------
You can pull in the content of additional journal files by writing an
include directive, like this:
include path/to/file.journal
If the path does not begin with a slash, it is relative to the
current file. Glob patterns ('*') are not currently supported.
The 'include' directive can only be used in journal files. It can
include journal, timeclock or timedot files, but not CSV files.
File: hledger_journal.5.info, Node: EDITOR SUPPORT, Prev: FILE FORMAT, Up: Top
2 EDITOR SUPPORT
****************
Add-on modes exist for various text editors, to make working with
journal files easier. They add colour, navigation aids and helpful
commands. For hledger users who edit the journal file directly (the
majority), using one of these modes is quite recommended.
These were written with Ledger in mind, but also work with hledger
files:
Emacs http://www.ledger-cli.org/3.0/doc/ledger-mode.html
Vim https://github.com/ledger/ledger/wiki/Getting-started
Sublime Text https://github.com/ledger/ledger/wiki/Using-Sublime-Text
Textmate https://github.com/ledger/ledger/wiki/Using-TextMate-2
Text Wrangler https://github.com/ledger/ledger/wiki/Editing-Ledger-files-with-TextWrangler
Tag Table:
Node: Top78
Node: FILE FORMAT2292
Ref: #file-format2418
Node: Transactions2601
Ref: #transactions2721
Node: Dates3663
Ref: #dates3791
Node: Simple dates3856
Ref: #simple-dates3984
Node: Secondary dates4350
Ref: #secondary-dates4506
Node: Posting dates6069
Ref: #posting-dates6200
Node: Account names7574
Ref: #account-names7713
Node: Amounts8200
Ref: #amounts8338
Node: Virtual Postings10439
Ref: #virtual-postings10600
Node: Balance Assertions11820
Ref: #balance-assertions11997
Node: Assertions and ordering12893
Ref: #assertions-and-ordering13081
Node: Assertions and included files13781
Ref: #assertions-and-included-files14024
Node: Assertions and multiple -f options14357
Ref: #assertions-and-multiple--f-options14613
Node: Assertions and commodities14745
Ref: #assertions-and-commodities14982
Node: Assertions and subaccounts15678
Ref: #assertions-and-subaccounts15912
Node: Assertions and virtual postings16433
Ref: #assertions-and-virtual-postings16642
Node: Balance Assignments16784
Ref: #balance-assignments16953
Node: Prices18072
Ref: #prices18205
Node: Transaction prices18256
Ref: #transaction-prices18401
Node: Market prices19978
Ref: #market-prices20113
Node: Comments21086
Ref: #comments21208
Node: Tags22321
Ref: #tags22441
Node: Implicit tags23870
Ref: #implicit-tags23978
Node: Directives24495
Ref: #directives24610
Node: Account aliases24803
Ref: #account-aliases24949
Node: Basic aliases25553
Ref: #basic-aliases25698
Node: Regex aliases26388
Ref: #regex-aliases26558
Node: Multiple aliases27329
Ref: #multiple-aliases27503
Node: end aliases28001
Ref: #end-aliases28143
Node: account directive28244
Ref: #account-directive28426
Node: apply account directive28722
Ref: #apply-account-directive28920
Node: Multi-line comments29579
Ref: #multi-line-comments29771
Node: commodity directive29899
Ref: #commodity-directive30085
Node: Default commodity30957
Ref: #default-commodity31132
Node: Default year31669
Ref: #default-year31836
Node: Including other files32259
Ref: #including-other-files32418
Node: EDITOR SUPPORT32815
Ref: #editor-support32935
End Tag Table