hledger-lib-1.17: hledger_csv.info
This is hledger_csv.info, produced by makeinfo version 6.7 from stdin.
File: hledger_csv.info, Node: Top, Next: EXAMPLES, Up: (dir)
hledger_csv(5) hledger 1.17
***************************
CSV - how hledger reads CSV data, and the CSV rules file format
hledger can read CSV (Comma Separated Value/Character Separated
Value) files as if they were journal files, automatically converting
each CSV record into a transaction. (To learn about _writing_ CSV, see
CSV output.)
We describe each CSV file's format with a corresponding _rules file_.
By default this is named like the CSV file with a '.rules' extension
added. Eg when reading 'FILE.csv', hledger also looks for
'FILE.csv.rules' in the same directory. You can specify a different
rules file with the '--rules-file' option. If a rules file is not
found, hledger will create a sample rules file, which you'll need to
adjust.
This file contains rules describing the CSV data (header line, fields
layout, date format etc.), and how to construct hledger journal entries
(transactions) from it. Often there will also be a list of conditional
rules for categorising transactions based on their descriptions. Here's
an overview of the CSV rules; these are described more fully below,
after the examples:
*'skip'* skip one or more header lines or matched CSV records
*'fields'* name CSV fields, assign them to hledger fields
*field assign a value to one hledger field, with interpolation
assignment*
*'separator'* a custom field separator
*'if'* apply some rules to matched CSV records
*'end'* skip the remaining CSV records
*'date-format'* describe the format of CSV dates
*'newest-first'* disambiguate record order when there's only one date
*'include'* inline another CSV rules file
Note, for best error messages when reading CSV files, use a '.csv',
'.tsv' or '.ssv' file extension or file prefix - see File Extension
below.
There's an introductory Convert CSV files tutorial on hledger.org.
* Menu:
* EXAMPLES::
* CSV RULES::
* TIPS::
File: hledger_csv.info, Node: EXAMPLES, Next: CSV RULES, Prev: Top, Up: Top
1 EXAMPLES
**********
Here are some sample hledger CSV rules files. See also the full
collection at:
https://github.com/simonmichael/hledger/tree/master/examples/csv
* Menu:
* Basic::
* Bank of Ireland::
* Amazon::
* Paypal::
File: hledger_csv.info, Node: Basic, Next: Bank of Ireland, Up: EXAMPLES
1.1 Basic
=========
At minimum, the rules file must identify the date and amount fields, and
often it also specifies the date format and how many header lines there
are. Here's a simple CSV file and a rules file for it:
Date, Description, Id, Amount
12/11/2019, Foo, 123, 10.23
# basic.csv.rules
skip 1
fields date, description, _, amount
date-format %d/%m/%Y
$ hledger print -f basic.csv
2019-11-12 Foo
expenses:unknown 10.23
income:unknown -10.23
Default account names are chosen, since we didn't set them.
File: hledger_csv.info, Node: Bank of Ireland, Next: Amazon, Prev: Basic, Up: EXAMPLES
1.2 Bank of Ireland
===================
Here's a CSV with two amount fields (Debit and Credit), and a balance
field, which we can use to add balance assertions, which is not
necessary but provides extra error checking:
Date,Details,Debit,Credit,Balance
07/12/2012,LODGMENT 529898,,10.0,131.21
07/12/2012,PAYMENT,5,,126
# bankofireland-checking.csv.rules
# skip the header line
skip
# name the csv fields, and assign some of them as journal entry fields
fields date, description, amount-out, amount-in, balance
# We generate balance assertions by assigning to "balance"
# above, but you may sometimes need to remove these because:
#
# - the CSV balance differs from the true balance,
# by up to 0.0000000000005 in my experience
#
# - it is sometimes calculated based on non-chronological ordering,
# eg when multiple transactions clear on the same day
# date is in UK/Ireland format
date-format %d/%m/%Y
# set the currency
currency EUR
# set the base account for all txns
account1 assets:bank:boi:checking
$ hledger -f bankofireland-checking.csv print
2012-12-07 LODGMENT 529898
assets:bank:boi:checking EUR10.0 = EUR131.2
income:unknown EUR-10.0
2012-12-07 PAYMENT
assets:bank:boi:checking EUR-5.0 = EUR126.0
expenses:unknown EUR5.0
The balance assertions don't raise an error above, because we're
reading directly from CSV, but they will be checked if these entries are
imported into a journal file.
File: hledger_csv.info, Node: Amazon, Next: Paypal, Prev: Bank of Ireland, Up: EXAMPLES
1.3 Amazon
==========
Here we convert amazon.com order history, and use an if block to
generate a third posting if there's a fee. (In practice you'd probably
get this data from your bank instead, but it's an example.)
"Date","Type","To/From","Name","Status","Amount","Fees","Transaction ID"
"Jul 29, 2012","Payment","To","Foo.","Completed","$20.00","$0.00","16000000000000DGLNJPI1P9B8DKPVHL"
"Jul 30, 2012","Payment","To","Adapteva, Inc.","Completed","$25.00","$1.00","17LA58JSKRD4HDGLNJPI1P9B8DKPVHL"
# amazon-orders.csv.rules
# skip one header line
skip 1
# name the csv fields, and assign the transaction's date, amount and code.
# Avoided the "status" and "amount" hledger field names to prevent confusion.
fields date, _, toorfrom, name, amzstatus, amzamount, fees, code
# how to parse the date
date-format %b %-d, %Y
# combine two fields to make the description
description %toorfrom %name
# save the status as a tag
comment status:%amzstatus
# set the base account for all transactions
account1 assets:amazon
# leave amount1 blank so it can balance the other(s).
# I'm assuming amzamount excludes the fees, don't remember
# set a generic account2
account2 expenses:misc
amount2 %amzamount
# and maybe refine it further:
#include categorisation.rules
# add a third posting for fees, but only if they are non-zero.
if %fees [1-9]
account3 expenses:fees
amount3 %fees
$ hledger -f amazon-orders.csv print
2012-07-29 (16000000000000DGLNJPI1P9B8DKPVHL) To Foo. ; status:Completed
assets:amazon
expenses:misc $20.00
2012-07-30 (17LA58JSKRD4HDGLNJPI1P9B8DKPVHL) To Adapteva, Inc. ; status:Completed
assets:amazon
expenses:misc $25.00
expenses:fees $1.00
File: hledger_csv.info, Node: Paypal, Prev: Amazon, Up: EXAMPLES
1.4 Paypal
==========
Here's a real-world rules file for (customised) Paypal CSV, with some
Paypal-specific rules, and a second rules file included:
"Date","Time","TimeZone","Name","Type","Status","Currency","Gross","Fee","Net","From Email Address","To Email Address","Transaction ID","Item Title","Item ID","Reference Txn ID","Receipt ID","Balance","Note"
"10/01/2019","03:46:20","PDT","Calm Radio","Subscription Payment","Completed","USD","-6.99","0.00","-6.99","simon@joyful.com","memberships@calmradio.com","60P57143A8206782E","MONTHLY - $1 for the first 2 Months: Me - Order 99309. Item total: $1.00 USD first 2 months, then $6.99 / Month","","I-R8YLY094FJYR","","-6.99",""
"10/01/2019","03:46:20","PDT","","Bank Deposit to PP Account ","Pending","USD","6.99","0.00","6.99","","simon@joyful.com","0TU1544T080463733","","","60P57143A8206782E","","0.00",""
"10/01/2019","08:57:01","PDT","Patreon","PreApproved Payment Bill User Payment","Completed","USD","-7.00","0.00","-7.00","simon@joyful.com","support@patreon.com","2722394R5F586712G","Patreon* Membership","","B-0PG93074E7M86381M","","-7.00",""
"10/01/2019","08:57:01","PDT","","Bank Deposit to PP Account ","Pending","USD","7.00","0.00","7.00","","simon@joyful.com","71854087RG994194F","Patreon* Membership","","2722394R5F586712G","","0.00",""
"10/19/2019","03:02:12","PDT","Wikimedia Foundation, Inc.","Subscription Payment","Completed","USD","-2.00","0.00","-2.00","simon@joyful.com","tle@wikimedia.org","K9U43044RY432050M","Monthly donation to the Wikimedia Foundation","","I-R5C3YUS3285L","","-2.00",""
"10/19/2019","03:02:12","PDT","","Bank Deposit to PP Account ","Pending","USD","2.00","0.00","2.00","","simon@joyful.com","3XJ107139A851061F","","","K9U43044RY432050M","","0.00",""
"10/22/2019","05:07:06","PDT","Noble Benefactor","Subscription Payment","Completed","USD","10.00","-0.59","9.41","noble@bene.fac.tor","simon@joyful.com","6L8L1662YP1334033","Joyful Systems","","I-KC9VBGY2GWDB","","9.41",""
# paypal-custom.csv.rules
# Tips:
# Export from Activity -> Statements -> Custom -> Activity download
# Suggested transaction type: "Balance affecting"
# Paypal's default fields in 2018 were:
# "Date","Time","TimeZone","Name","Type","Status","Currency","Gross","Fee","Net","From Email Address","To Email Address","Transaction ID","Shipping Address","Address Status","Item Title","Item ID","Shipping and Handling Amount","Insurance Amount","Sales Tax","Option 1 Name","Option 1 Value","Option 2 Name","Option 2 Value","Reference Txn ID","Invoice Number","Custom Number","Quantity","Receipt ID","Balance","Address Line 1","Address Line 2/District/Neighborhood","Town/City","State/Province/Region/County/Territory/Prefecture/Republic","Zip/Postal Code","Country","Contact Phone Number","Subject","Note","Country Code","Balance Impact"
# This rules file assumes the following more detailed fields, configured in "Customize report fields":
# "Date","Time","TimeZone","Name","Type","Status","Currency","Gross","Fee","Net","From Email Address","To Email Address","Transaction ID","Item Title","Item ID","Reference Txn ID","Receipt ID","Balance","Note"
fields date, time, timezone, description_, type, status_, currency, grossamount, feeamount, netamount, fromemail, toemail, code, itemtitle, itemid, referencetxnid, receiptid, balance, note
skip 1
date-format %-m/%-d/%Y
# ignore some paypal events
if
In Progress
Temporary Hold
Update to
skip
# add more fields to the description
description %description_ %itemtitle
# save some other fields as tags
comment itemid:%itemid, fromemail:%fromemail, toemail:%toemail, time:%time, type:%type, status:%status_
# convert to short currency symbols
if %currency USD
currency $
if %currency EUR
currency E
if %currency GBP
currency P
# generate postings
# the first posting will be the money leaving/entering my paypal account
# (negative means leaving my account, in all amount fields)
account1 assets:online:paypal
amount1 %netamount
# the second posting will be money sent to/received from other party
# (account2 is set below)
amount2 -%grossamount
# if there's a fee, add a third posting for the money taken by paypal.
if %feeamount [1-9]
account3 expenses:banking:paypal
amount3 -%feeamount
comment3 business:
# choose an account for the second posting
# override the default account names:
# if the amount is positive, it's income (a debit)
if %grossamount ^[^-]
account2 income:unknown
# if negative, it's an expense (a credit)
if %grossamount ^-
account2 expenses:unknown
# apply common rules for setting account2 & other tweaks
include common.rules
# apply some overrides specific to this csv
# Transfers from/to bank. These are usually marked Pending,
# which can be disregarded in this case.
if
Bank Account
Bank Deposit to PP Account
description %type for %referencetxnid %itemtitle
account2 assets:bank:wf:pchecking
account1 assets:online:paypal
# Currency conversions
if Currency Conversion
account2 equity:currency conversion
# common.rules
if
darcs
noble benefactor
account2 revenues:foss donations:darcshub
comment2 business:
if
Calm Radio
account2 expenses:online:apps
if
electronic frontier foundation
Patreon
wikimedia
Advent of Code
account2 expenses:dues
if Google
account2 expenses:online:apps
description google | music
$ hledger -f paypal-custom.csv print
2019-10-01 (60P57143A8206782E) Calm Radio MONTHLY - $1 for the first 2 Months: Me - Order 99309. Item total: $1.00 USD first 2 months, then $6.99 / Month ; itemid:, fromemail:simon@joyful.com, toemail:memberships@calmradio.com, time:03:46:20, type:Subscription Payment, status:Completed
assets:online:paypal $-6.99 = $-6.99
expenses:online:apps $6.99
2019-10-01 (0TU1544T080463733) Bank Deposit to PP Account for 60P57143A8206782E ; itemid:, fromemail:, toemail:simon@joyful.com, time:03:46:20, type:Bank Deposit to PP Account, status:Pending
assets:online:paypal $6.99 = $0.00
assets:bank:wf:pchecking $-6.99
2019-10-01 (2722394R5F586712G) Patreon Patreon* Membership ; itemid:, fromemail:simon@joyful.com, toemail:support@patreon.com, time:08:57:01, type:PreApproved Payment Bill User Payment, status:Completed
assets:online:paypal $-7.00 = $-7.00
expenses:dues $7.00
2019-10-01 (71854087RG994194F) Bank Deposit to PP Account for 2722394R5F586712G Patreon* Membership ; itemid:, fromemail:, toemail:simon@joyful.com, time:08:57:01, type:Bank Deposit to PP Account, status:Pending
assets:online:paypal $7.00 = $0.00
assets:bank:wf:pchecking $-7.00
2019-10-19 (K9U43044RY432050M) Wikimedia Foundation, Inc. Monthly donation to the Wikimedia Foundation ; itemid:, fromemail:simon@joyful.com, toemail:tle@wikimedia.org, time:03:02:12, type:Subscription Payment, status:Completed
assets:online:paypal $-2.00 = $-2.00
expenses:dues $2.00
expenses:banking:paypal ; business:
2019-10-19 (3XJ107139A851061F) Bank Deposit to PP Account for K9U43044RY432050M ; itemid:, fromemail:, toemail:simon@joyful.com, time:03:02:12, type:Bank Deposit to PP Account, status:Pending
assets:online:paypal $2.00 = $0.00
assets:bank:wf:pchecking $-2.00
2019-10-22 (6L8L1662YP1334033) Noble Benefactor Joyful Systems ; itemid:, fromemail:noble@bene.fac.tor, toemail:simon@joyful.com, time:05:07:06, type:Subscription Payment, status:Completed
assets:online:paypal $9.41 = $9.41
revenues:foss donations:darcshub $-10.00 ; business:
expenses:banking:paypal $0.59 ; business:
File: hledger_csv.info, Node: CSV RULES, Next: TIPS, Prev: EXAMPLES, Up: Top
2 CSV RULES
***********
The following kinds of rule can appear in the rules file, in any order.
Blank lines and lines beginning with '#' or ';' are ignored.
* Menu:
* skip::
* fields::
* field assignment::
* separator::
* if::
* end::
* date-format::
* newest-first::
* include::
* balance-type::
File: hledger_csv.info, Node: skip, Next: fields, Up: CSV RULES
2.1 'skip'
==========
skip N
The word "skip" followed by a number (or no number, meaning 1) tells
hledger to ignore this many non-empty lines preceding the CSV data.
(Empty/blank lines are skipped automatically.) You'll need this
whenever your CSV data contains header lines.
It also has a second purpose: it can be used inside if blocks to
ignore certain CSV records (described below).
File: hledger_csv.info, Node: fields, Next: field assignment, Prev: skip, Up: CSV RULES
2.2 'fields'
============
fields FIELDNAME1, FIELDNAME2, ...
A fields list (the word "fields" followed by comma-separated field
names) is the quick way to assign CSV field values to hledger fields.
It does two things:
1. it names the CSV fields. This is optional, but can be convenient
later for interpolating them.
2. when you use a standard hledger field name, it assigns the CSV
value to that part of the hledger transaction.
Here's an example that says "use the 1st, 2nd and 4th fields as the
transaction's date, description and amount; name the last two fields for
later reference; and ignore the others":
fields date, description, , amount, , , somefield, anotherfield
Field names may not contain whitespace. Fields you don't care about
can be left unnamed. Currently there must be least two items (there
must be at least one comma).
Note, always use comma in the fields list, even if your CSV uses
another separator character.
Here are the standard hledger field/pseudo-field names. For more
about the transaction parts they refer to, see the manual for hledger's
journal format.
* Menu:
* Transaction field names::
* Posting field names::
File: hledger_csv.info, Node: Transaction field names, Next: Posting field names, Up: fields
2.2.1 Transaction field names
-----------------------------
'date', 'date2', 'status', 'code', 'description', 'comment' can be used
to form the transaction's first line.
File: hledger_csv.info, Node: Posting field names, Prev: Transaction field names, Up: fields
2.2.2 Posting field names
-------------------------
'accountN', where N is 1 to 9, generates a posting, with that account
name. Most often there are two postings, so you'll want to set
'account1' and 'account2'. If a posting's account name is left unset
but its amount is set, a default account name will be chosen (like
expenses:unknown or income:unknown).
'amountN' sets posting N's amount. Or, 'amount' with no N sets
posting 1's. If the CSV has debits and credits in separate fields, use
'amountN-in' and 'amountN-out' instead. Or 'amount-in' and 'amount-out'
with no N for posting 1.
For convenience and backwards compatibility, if you set the amount of
posting 1 only, a second posting with the negative amount will be
generated automatically. (Unless the account name is parenthesised
indicating an unbalanced posting.)
If the CSV has the currency symbol in a separate field, you can use
'currencyN' to prepend it to posting N's amount. 'currency' with no N
affects ALL postings.
'balanceN' sets a balance assertion amount (or if the posting amount
is left empty, a balance assignment). You may need to adjust this with
the 'balance-type' rule.
Finally, 'commentN' sets a comment on the Nth posting. Comments can
also contain tags, as usual.
See TIPS below for more about setting amounts and currency.
File: hledger_csv.info, Node: field assignment, Next: separator, Prev: fields, Up: CSV RULES
2.3 field assignment
====================
HLEDGERFIELDNAME FIELDVALUE
Instead of or in addition to a fields list, you can use a "field
assignment" rule to set the value of a single hledger field, by writing
its name (any of the standard hledger field names above) followed by a
text value. The value may contain interpolated CSV fields, referenced
by their 1-based position in the CSV record ('%N'), or by the name they
were given in the fields list ('%CSVFIELDNAME'). Some examples:
# set the amount to the 4th CSV field, with " USD" appended
amount %4 USD
# combine three fields to make a comment, containing note: and date: tags
comment note: %somefield - %anotherfield, date: %1
Interpolation strips outer whitespace (so a CSV value like '" 1 "'
becomes '1' when interpolated) (#1051). See TIPS below for more about
referencing other fields.
File: hledger_csv.info, Node: separator, Next: if, Prev: field assignment, Up: CSV RULES
2.4 'separator'
===============
You can use the 'separator' directive to read other kinds of
character-separated data. Eg to read SSV (Semicolon Separated Values),
use:
separator ;
The separator directive accepts exactly one single byte character as
a separator. To specify whitespace characters, you may use the special
words 'TAB' or 'SPACE'. Eg to read TSV (Tab Separated Values), use:
separator TAB
See also: File Extension.
File: hledger_csv.info, Node: if, Next: end, Prev: separator, Up: CSV RULES
2.5 'if'
========
if MATCHER
RULE
if
MATCHER
MATCHER
MATCHER
RULE
RULE
Conditional blocks ("if blocks") are a block of rules that are
applied only to CSV records which match certain patterns. They are
often used for customising account names based on transaction
descriptions.
Each MATCHER can be a record matcher, which looks like this:
REGEX
REGEX is a case-insensitive regular expression which tries to match
anywhere within the CSV record. It is a POSIX extended regular
expressions with some additions (see Regular expressions in the hledger
manual). Note: the "CSV record" it is matched against is not the
original record, but a synthetic one, with enclosing double quotes or
whitespace removed, and always comma-separated. (Eg, an SSV record
'2020-01-01; "Acme, Inc."; 1,000' appears to REGEX as '2020-01-01,Acme,
Inc.,1,000').
Or, MATCHER can be a field matcher, like this:
%CSVFIELD REGEX
which matches just the content of a particular CSV field. CSVFIELD
is a percent sign followed by the field's name or column number, like
'%date' or '%1'.
A single matcher can be written on the same line as the "if"; or
multiple matchers can be written on the following lines, non-indented.
Multiple matchers are OR'd (any one of them can match).
After the patterns there should be one or more rules to apply, all
indented by at least one space. Three kinds of rule are allowed in
conditional blocks:
* field assignments (to set a hledger field)
* skip (to skip the matched CSV record)
* end (to skip all remaining CSV records).
Examples:
# if the CSV record contains "groceries", set account2 to "expenses:groceries"
if groceries
account2 expenses:groceries
# if the CSV record contains any of these patterns, set account2 and comment as shown
if
monthly service fee
atm transaction fee
banking thru software
account2 expenses:business:banking
comment XXX deductible ? check it
File: hledger_csv.info, Node: end, Next: date-format, Prev: if, Up: CSV RULES
2.6 'end'
=========
This rule can be used inside if blocks (only), to make hledger stop
reading this CSV file and move on to the next input file, or to command
execution. Eg:
# ignore everything following the first empty record
if ,,,,
end
File: hledger_csv.info, Node: date-format, Next: newest-first, Prev: end, Up: CSV RULES
2.7 'date-format'
=================
date-format DATEFMT
This is a helper for the 'date' (and 'date2') fields. If your CSV
dates are not formatted like 'YYYY-MM-DD', 'YYYY/MM/DD' or 'YYYY.MM.DD',
you'll need to add a date-format rule describing them with a strptime
date parsing pattern, which must parse the CSV date value completely.
Some examples:
# MM/DD/YY
date-format %m/%d/%y
# D/M/YYYY
# The - makes leading zeros optional.
date-format %-d/%-m/%Y
# YYYY-Mmm-DD
date-format %Y-%h-%d
# M/D/YYYY HH:MM AM some other junk
# Note the time and junk must be fully parsed, though only the date is used.
date-format %-m/%-d/%Y %l:%M %p some other junk
For the supported strptime syntax, see:
https://hackage.haskell.org/package/time/docs/Data-Time-Format.html#v:formatTime
File: hledger_csv.info, Node: newest-first, Next: include, Prev: date-format, Up: CSV RULES
2.8 'newest-first'
==================
hledger always sorts the generated transactions by date. Transactions
on the same date should appear in the same order as their CSV records,
as hledger can usually auto-detect whether the CSV's normal order is
oldest first or newest first. But if all of the following are true:
* the CSV might sometimes contain just one day of data (all records
having the same date)
* the CSV records are normally in reverse chronological order (newest
at the top)
* and you care about preserving the order of same-day transactions
then, you should add the 'newest-first' rule as a hint. Eg:
# tell hledger explicitly that the CSV is normally newest first
newest-first
File: hledger_csv.info, Node: include, Next: balance-type, Prev: newest-first, Up: CSV RULES
2.9 'include'
=============
include RULESFILE
This includes the contents of another CSV rules file at this point.
'RULESFILE' is an absolute file path or a path relative to the current
file's directory. This can be useful for sharing common rules between
several rules files, eg:
# someaccount.csv.rules
## someaccount-specific rules
fields date,description,amount
account1 assets:someaccount
account2 expenses:misc
## common rules
include categorisation.rules
File: hledger_csv.info, Node: balance-type, Prev: include, Up: CSV RULES
2.10 'balance-type'
===================
Balance assertions generated by assigning to balanceN are of the simple
'=' type by default, which is a single-commodity, subaccount-excluding
assertion. You may find the subaccount-including variants more useful,
eg if you have created some virtual subaccounts of checking to help with
budgeting. You can select a different type of assertion with the
'balance-type' rule:
# balance assertions will consider all commodities and all subaccounts
balance-type ==*
Here are the balance assertion types for quick reference:
= single commodity, exclude subaccounts
=* single commodity, include subaccounts
== multi commodity, exclude subaccounts
==* multi commodity, include subaccounts
File: hledger_csv.info, Node: TIPS, Prev: CSV RULES, Up: Top
3 TIPS
******
* Menu:
* Rapid feedback::
* Valid CSV::
* File Extension::
* Reading multiple CSV files::
* Valid transactions::
* Deduplicating importing::
* Setting amounts::
* Setting currency/commodity::
* Referencing other fields::
* How CSV rules are evaluated::
File: hledger_csv.info, Node: Rapid feedback, Next: Valid CSV, Up: TIPS
3.1 Rapid feedback
==================
It's a good idea to get rapid feedback while creating/troubleshooting
CSV rules. Here's a good way, using entr from
http://eradman.com/entrproject :
$ ls foo.csv* | entr bash -c 'echo ----; hledger -f foo.csv print desc:SOMEDESC'
A desc: query (eg) is used to select just one, or a few, transactions
of interest. "bash -c" is used to run multiple commands, so we can echo
a separator each time the command re-runs, making it easier to read the
output.
File: hledger_csv.info, Node: Valid CSV, Next: File Extension, Prev: Rapid feedback, Up: TIPS
3.2 Valid CSV
=============
hledger accepts CSV conforming to RFC 4180. When CSV values are
enclosed in quotes, note:
* they must be double quotes (not single quotes)
* spaces outside the quotes are not allowed
File: hledger_csv.info, Node: File Extension, Next: Reading multiple CSV files, Prev: Valid CSV, Up: TIPS
3.3 File Extension
==================
CSV ("Character Separated Values") files should be named with one of
these filename extensions: '.csv', '.ssv', '.tsv'. Or, the file path
should be prefixed with one of 'csv:', 'ssv:', 'tsv:'. This helps
hledger identify the format and show the right error messages. For
example:
$ hledger -f foo.ssv print
or:
$ cat foo | hledger -f ssv:- foo
More about this: Input files in the hledger manual.
File: hledger_csv.info, Node: Reading multiple CSV files, Next: Valid transactions, Prev: File Extension, Up: TIPS
3.4 Reading multiple CSV files
==============================
If you use multiple '-f' options to read multiple CSV files at once,
hledger will look for a correspondingly-named rules file for each CSV
file. But if you use the '--rules-file' option, that rules file will be
used for all the CSV files.
File: hledger_csv.info, Node: Valid transactions, Next: Deduplicating importing, Prev: Reading multiple CSV files, Up: TIPS
3.5 Valid transactions
======================
After reading a CSV file, hledger post-processes and validates the
generated journal entries as it would for a journal file - balancing
them, applying balance assignments, and canonicalising amount styles.
Any errors at this stage will be reported in the usual way, displaying
the problem entry.
There is one exception: balance assertions, if you have generated
them, will not be checked, since normally these will work only when the
CSV data is part of the main journal. If you do need to check balance
assertions generated from CSV right away, pipe into another hledger:
$ hledger -f file.csv print | hledger -f- print
File: hledger_csv.info, Node: Deduplicating importing, Next: Setting amounts, Prev: Valid transactions, Up: TIPS
3.6 Deduplicating, importing
============================
When you download a CSV file periodically, eg to get your latest bank
transactions, the new file may overlap with the old one, containing some
of the same records.
The import command will (a) detect the new transactions, and (b)
append just those transactions to your main journal. It is idempotent,
so you don't have to remember how many times you ran it or with which
version of the CSV. (It keeps state in a hidden '.latest.FILE.csv'
file.) This is the easiest way to import CSV data. Eg:
# download the latest CSV files, then run this command.
# Note, no -f flags needed here.
$ hledger import *.csv [--dry]
This method works for most CSV files. (Where records have a stable
chronological order, and new records appear only at the new end.)
A number of other tools and workflows, hledger-specific and
otherwise, exist for converting, deduplicating, classifying and managing
CSV data. See:
* https://hledger.org -> sidebar -> real world setups
* https://plaintextaccounting.org -> data import/conversion
File: hledger_csv.info, Node: Setting amounts, Next: Setting currency/commodity, Prev: Deduplicating importing, Up: TIPS
3.7 Setting amounts
===================
A posting amount can be set in one of these ways:
* by assigning (with a fields list or field assigment) to 'amountN'
(posting N's amount) or 'amount' (posting 1's amount)
* by assigning to 'amountN-in' and 'amountN-out' (or 'amount-in' and
'amount-out'). For each CSV record, whichever of these has a
non-zero value will be used, with appropriate sign. If both
contain a non-zero value, this may not work.
* by assigning to 'balanceN' (or 'balance') instead of the above,
setting the amount indirectly via a balance assignment. If you do
this the default account name may be wrong, so you should set that
explicitly.
There is some special handling for an amount's sign:
* If an amount value is parenthesised, it will be de-parenthesised
and sign-flipped.
* If an amount value begins with a double minus sign, those cancel
out and are removed.
* If an amount value begins with a plus sign, that will be removed
File: hledger_csv.info, Node: Setting currency/commodity, Next: Referencing other fields, Prev: Setting amounts, Up: TIPS
3.8 Setting currency/commodity
==============================
If the currency/commodity symbol is included in the CSV's amount
field(s), you don't have to do anything special.
If the currency is provided as a separate CSV field, you can either:
* assign that to 'currency', which adds it to all posting amounts.
The symbol will prepended to the amount quantity (on the left
side). If you write a trailing space after the symbol, there will
be a space between symbol and amount (an exception to the usual
whitespace stripping).
* or assign it to 'currencyN' which adds it to posting N's amount
only.
* or for more control, construct the amount from symbol and quantity
using field assignment, eg:
fields date,description,currency,quantity
# add currency symbol on the right:
amount %quantity %currency
File: hledger_csv.info, Node: Referencing other fields, Next: How CSV rules are evaluated, Prev: Setting currency/commodity, Up: TIPS
3.9 Referencing other fields
============================
In field assignments, you can interpolate only CSV fields, not hledger
fields. In the example below, there's both a CSV field and a hledger
field named amount1, but %amount1 always means the CSV field, not the
hledger field:
# Name the third CSV field "amount1"
fields date,description,amount1
# Set hledger's amount1 to the CSV amount1 field followed by USD
amount1 %amount1 USD
# Set comment to the CSV amount1 (not the amount1 assigned above)
comment %amount1
Here, since there's no CSV amount1 field, %amount1 will produce a
literal "amount1":
fields date,description,csvamount
amount1 %csvamount USD
# Can't interpolate amount1 here
comment %amount1
When there are multiple field assignments to the same hledger field,
only the last one takes effect. Here, comment's value will be be B, or
C if "something" is matched, but never A:
comment A
comment B
if something
comment C
File: hledger_csv.info, Node: How CSV rules are evaluated, Prev: Referencing other fields, Up: TIPS
3.10 How CSV rules are evaluated
================================
Here's how to think of CSV rules being evaluated (if you really need
to). First,
* 'include' - all includes are inlined, from top to bottom, depth
first. (At each include point the file is inlined and scanned for
further includes, recursively, before proceeding.)
Then "global" rules are evaluated, top to bottom. If a rule is
repeated, the last one wins:
* 'skip' (at top level)
* 'date-format'
* 'newest-first'
* 'fields' - names the CSV fields, optionally sets up initial
assignments to hledger fields
Then for each CSV record in turn:
* test all 'if' blocks. If any of them contain a 'end' rule, skip
all remaining CSV records. Otherwise if any of them contain a
'skip' rule, skip that many CSV records. If there are multiple
matched 'skip' rules, the first one wins.
* collect all field assignments at top level and in matched 'if'
blocks. When there are multiple assignments for a field, keep only
the last one.
* compute a value for each hledger field - either the one that was
assigned to it (and interpolate the %CSVFIELDNAME references), or a
default
* generate a synthetic hledger transaction from these values.
This is all part of the CSV reader, one of several readers hledger
can use to parse input files. When all files have been read
successfully, the transactions are passed as input to whichever hledger
command the user specified.
Tag Table:
Node: Top72
Node: EXAMPLES2093
Ref: #examples2199
Node: Basic2407
Ref: #basic2507
Node: Bank of Ireland3049
Ref: #bank-of-ireland3184
Node: Amazon4646
Ref: #amazon4764
Node: Paypal6483
Ref: #paypal6577
Node: CSV RULES14221
Ref: #csv-rules14330
Node: skip14606
Ref: #skip14699
Node: fields15074
Ref: #fields15196
Node: Transaction field names16361
Ref: #transaction-field-names16521
Node: Posting field names16632
Ref: #posting-field-names16784
Node: field assignment18075
Ref: #field-assignment18218
Node: separator19036
Ref: #separator19165
Node: if19576
Ref: #if19678
Node: end21597
Ref: #end21703
Node: date-format21927
Ref: #date-format22059
Node: newest-first22808
Ref: #newest-first22946
Node: include23629
Ref: #include23758
Node: balance-type24202
Ref: #balance-type24322
Node: TIPS25022
Ref: #tips25104
Node: Rapid feedback25360
Ref: #rapid-feedback25477
Node: Valid CSV25937
Ref: #valid-csv26067
Node: File Extension26259
Ref: #file-extension26411
Node: Reading multiple CSV files26821
Ref: #reading-multiple-csv-files27006
Node: Valid transactions27247
Ref: #valid-transactions27425
Node: Deduplicating importing28053
Ref: #deduplicating-importing28232
Node: Setting amounts29265
Ref: #setting-amounts29434
Node: Setting currency/commodity30420
Ref: #setting-currencycommodity30612
Node: Referencing other fields31415
Ref: #referencing-other-fields31615
Node: How CSV rules are evaluated32512
Ref: #how-csv-rules-are-evaluated32685
End Tag Table
Local Variables:
coding: utf-8
End: