{-# LANGUAGE LambdaCase #-}
-- |
-- Module: Data.RTCM3.SBP
-- Copyright: Copyright (C) 2016 Swift Navigation, Inc.
-- License: LGPL-3
-- Maintainer: Mark Fine <dev@swiftnav.com>
-- Stability: experimental
-- Portability: portable
--
-- RTCMv3 to SBP Conversions.
module Data.RTCM3.SBP where
import BasicPrelude
import Control.Lens
import Data.Bits
import Data.HashMap.Strict
import Data.List.Extra hiding (concat, map)
import Data.Time
import Data.Word
import Data.RTCM3
import SwiftNav.SBP
--------------------------------------------------------------------------------
-- SBP, GNSS, RTCM constant definitions
-- | Two centimeters
--
-- SBP pseudoranges are in units of 2cm, and there are 50 of those in a meter.
twoCM :: Double
twoCM = 0.02
sbpCMinM :: Double
sbpCMinM = 50
-- | Speed of light (meters/msec)
lightSpeedMMSEC :: Double
lightSpeedMMSEC = 299792.458
-- | Speed of light (meters/sec)
lightSpeedMS :: Double
lightSpeedMS = 299792458.0
-- | L1 GPS center frequency (Hz)
l1frequency :: Double
l1frequency = 1.57542e9
-- | L2 GPS center frequency (Hz)
l2frequency :: Double
l2frequency = 1.22760e9
-- | We only support PRNS 1 - 32
maxSats :: Word8
maxSats = 32
-- | Q32.8 carrier phase representation width
q32Width :: Double
q32Width = 256
-- | RTCM phase range resolution.
--
-- See DF018, pg. 3-19 of the RTCM3 spec
phaseRangeRes :: Double
phaseRangeRes = 0.0005
-- | SBP L1 GNSS signal value
--
-- See: https://github.com/swift-nav/libswiftnav/blob/master/include/libswiftnav/signal.h#L65
l1CSidCode :: Word8
l1CSidCode = 0
-- | SBP L2CM GNSS signal value
--
-- See: https://github.com/swift-nav/libswiftnav/blob/master/include/libswiftnav/signal.h#L65
l2CMSidCode :: Word8
l2CMSidCode = 1
-- | SBP L1P and L2P GNSS signal values
--
-- Note that libswiftnav currently does not support L1P or L2P observations,
-- just L1C and L2C. This is a stop gap definition so that we can properly
-- serialize out SBP observations with L1P and L2P observations from external
-- receivers.
l1PSidCode :: Word8
l1PSidCode = 5
l2PSidCode :: Word8
l2PSidCode = 6
-- | L2C code indicator value
--
-- See DF016, pg. 3-17 of the RTCM3 spec
codeIndicator_L2C :: Word8
codeIndicator_L2C = 0
-- | L2P code indicator value
--
-- See DF016, pg. 3-17 of the RTCM3 spec
codeIndicator_L2PD :: Word8
codeIndicator_L2PD = 1
-- | Map L2 codes to SBP GnssSignal codes
--
l2codeToSBPSignalCode :: HashMap Word8 Word8
l2codeToSBPSignalCode = fromList [(0, l2CMSidCode), (1, l2PSidCode)]
-- | Maximum number of packed observations to allow in a single SBP message.
--
maxObsPerMessage :: Int
maxObsPerMessage = floor $ (maxPayloadSize - headerSize) / packedObsSize
where
maxPayloadSize = 255
headerSize = 7
packedObsSize = 16.0
--------------------------------------------------------------------------------
-- GNSS RTCM observation reconstruction utilities
fromEcefVal :: Int64 -> Double
fromEcefVal x = fromIntegral x / 10000
toGPSTime :: MonadIO m => GpsObservationHeader -> m ObsGPSTime
toGPSTime hdr = do
today <- utctDay <$> liftIO getCurrentTime
return ObsGPSTime
{ _obsGPSTime_tow = hdr ^. gpsObservationHeader_tow
, _obsGPSTime_wn = fromIntegral $ div (diffDays today (fromGregorian 1980 1 6)) 7
}
-- | Construct metric pseudorange (meters!) from L1 RTCM observation.
--
-- See DF011, pg. 3-16 of the RTCM3 spec
metricPseudorange :: GpsL1Observation -> GpsL1ExtObservation -> Double
metricPseudorange l1 l1e =
twoCM * fromIntegral (l1 ^. gpsL1Observation_pseudorange) +
lightSpeedMMSEC * fromIntegral (l1e ^. gpsL1ExtObservation_ambiguity)
-- | Construct L1 SBP pseudorange for L1 RTCM observation
--
-- See DF011, pg. 3-16 of the RTCM3 spec
toP_L1 :: GpsL1Observation -> GpsL1ExtObservation -> Word32
toP_L1 l1 l1e = round $ sbpCMinM * metricPseudorange l1 l1e
-- | Construct L2 SBP pseudorange from L1/L2 RTCM observations
--
-- See DF017, pg. 3-18 of the RTCM3 spec
toP_L2 :: GpsL1Observation -> GpsL1ExtObservation -> GpsL2Observation -> Word32
toP_L2 l1 l1e l2 = round $ p * sbpCMinM where
p = metricPseudorange l1 l1e +
twoCM * fromIntegral (l2 ^. gpsL2Observation_pseudorangeDifference)
-- | Construct SBP L1 GPS carrier phase from L1 RTCM observation
--
-- See DF012, pg. 3-16 of the RTCM3 spec
toL_L1 :: GpsL1Observation -> GpsL1ExtObservation -> CarrierPhase
toL_L1 l1 l1e = CarrierPhase
{ _carrierPhase_i = fromIntegral li
, _carrierPhase_f = fromIntegral lf
} where
p = metricPseudorange l1 l1e
-- Convert to SBP carrier phase representation per
-- https://github.com/swift-nav/libsbp/blob/master/spec/yaml/swiftnav/sbp/observation.yaml#L39
lm :: Double
lm = p + phaseRangeRes * fromIntegral (l1 ^. gpsL1Observation_carrierMinusCode)
l = lm / (lightSpeedMS / l1frequency)
li :: Int32
li = floor (l)
lf :: Word8
lf = truncate ((l - fromIntegral li) * q32Width)
-- | Construct SBP L2 GPS carrier phase from L2 RTCM observation
--
-- See DF018, pg. 3-18 of the RTCM3 spec
toL_L2 :: GpsL1Observation
-> GpsL1ExtObservation
-> GpsL2Observation
-> GpsL2ExtObservation
-> CarrierPhase
toL_L2 l1 l1e l2 l2e = CarrierPhase
{ _carrierPhase_i = fromIntegral li
, _carrierPhase_f = fromIntegral lf
} where
p = metricPseudorange l1 l1e
-- Convert to SBP carrier phase representation per
-- https://github.com/swift-nav/libsbp/blob/master/spec/yaml/swiftnav/sbp/observation.yaml#L39
lm :: Double
lm = p + phaseRangeRes * fromIntegral (l2 ^. gpsL2Observation_carrierMinusCode)
l = lm / (lightSpeedMS / l2frequency)
li :: Int32
li = floor (l)
lf :: Word8
lf = truncate ((l - fromIntegral li) * q32Width)
toCn0_L1 :: GpsL1ExtObservation -> Word8
toCn0_L1 = (^. gpsL1ExtObservation_cnr)
toCn0_L2 :: GpsL2ExtObservation -> Word8
toCn0_L2 = (^. gpsL2ExtObservation_cnr)
toLock_L1 :: GpsL1Observation -> Word16
toLock_L1 _l1 = 0
toLock_L2 :: GpsL2Observation -> Word16
toLock_L2 _l2 = 0
-- | Construct sequenced SBP observation header
--
fromGpsObservationHeader :: MonadIO m
=> Word8 -- ^ Total messages
-> Word8 -- ^ Message in sequence
-> GpsObservationHeader -- ^ RTCM observation header
-> m ObservationHeader
fromGpsObservationHeader totalMsgs n hdr = do
t <- toGPSTime hdr
return ObservationHeader
{ _observationHeader_t = t
-- First nibble is the size of the sequence (n), second nibble is the
-- zero-indexed counter (ith packet of n). See observation header packing
-- https://github.com/swift-nav/libsbp/blob/master/spec/yaml/swiftnav/sbp/observation.yaml#L63
, _observationHeader_n_obs = totalMsgs `shiftL` 4 .|. n
}
-- | Construct an L1 SBP PackedObsContent an RTCM satellite vehicle observation
--
fromL1SatelliteObservation :: Word8 -- ^ Satellite PRN
-> GpsL1Observation
-> GpsL1ExtObservation
-> PackedObsContent
fromL1SatelliteObservation sat l1 l1e =
-- Checks GPS L1 code indicator for RTCM message 1002.
-- See DF016, pg. 3-17 of the RTCM3 spec.
if l1 ^. gpsL1Observation_code then
PackedObsContent
{ _packedObsContent_P = toP_L1 l1 l1e
, _packedObsContent_L = toL_L1 l1 l1e
, _packedObsContent_cn0 = toCn0_L1 l1e
, _packedObsContent_lock = toLock_L1 l1
, _packedObsContent_sid = GnssSignal
{ _gnssSignal_sat = fromIntegral $ sat - 1
, _gnssSignal_code = l1PSidCode
, _gnssSignal_reserved = 0
}
}
else
PackedObsContent
{ _packedObsContent_P = toP_L1 l1 l1e
, _packedObsContent_L = toL_L1 l1 l1e
, _packedObsContent_cn0 = toCn0_L1 l1e
, _packedObsContent_lock = toLock_L1 l1
, _packedObsContent_sid = GnssSignal
{ _gnssSignal_sat = fromIntegral $ sat - 1
, _gnssSignal_code = l1CSidCode
, _gnssSignal_reserved = 0
}
}
-- | Construct SBP GPS observation message (possibly chunked).
--
chunkToMsgObs :: MonadIO m
=> Msg1004 -- ^ RTCM 1004 observation message
-> Word8 -- ^ Total messages
-> Word8 -- ^ Message in sequence
-> [PackedObsContent]
-> m MsgObs
chunkToMsgObs m totalMsgs n packed = do
header <- fromGpsObservationHeader totalMsgs n $ m ^. msg1004_header
return MsgObs
{ _msgObs_header = header
, _msgObs_obs = packed
}
-- | Sender Id is Station Id with high byte or'd in
--
toSender :: Word16 -> Word16
toSender = (.|. 0xf00)
--------------------------------------------------------------------------------
-- RTCM to SBP conversion utilities: RTCM Msgs. 1002 (L1 RTK), 1004 (L1+L2 RTK),
-- 1005 (antenna position), 1006 (antenna position).
-- | Construct an L1 SBP PackedObsContent from an RTCM Msg 1002.
--
fromObservation1002 :: Observation1002 -> Maybe PackedObsContent
fromObservation1002 obs =
-- Only lower set of PRN numbers (1-32) are supported
if sat > maxSats then Nothing else Just (fromL1SatelliteObservation sat l1 l1e)
where
sat = obs ^. observation1002_sat
l1 = obs ^. observation1002_l1
l1e = obs ^. observation1002_l1e
-- | Convert an RTCM L1 1002 observation into an SBP MsgObs.
--
fromMsg1002 :: MonadIO m => Msg1002 -> m MsgObs
fromMsg1002 m = do
header <- fromGpsObservationHeader 1 0 (m ^. msg1002_header)
return MsgObs
{ _msgObs_header = header
, _msgObs_obs = mapMaybe fromObservation1002 $ m ^. msg1002_observations
}
-- | Construct an L1/L2 SBP PackedObsContent from an RTCM Msg 1004.
--
fromObservation1004 :: Observation1004 -> Maybe [PackedObsContent]
fromObservation1004 obs =
-- Only lower set of PRN numbers (1-32) are supported
if sat > maxSats then Nothing else mapM id [obs1, obs2]
where
sat = obs ^. observation1004_sat
l1 = obs ^. observation1004_l1
l1e = obs ^. observation1004_l1e
-- Checks GPS L1 code indicator for RTCM message 1004
-- See DF016, pg. 3-17 of the RTCM3 spec.
obs1 = Just (fromL1SatelliteObservation sat l1 l1e)
l2 = obs ^. observation1004_l2
l2e = obs ^. observation1004_l2e
code = l2 ^. gpsL2Observation_code
-- Checks GPS L2 code indicator.
-- See DF016, pg. 3-17 of the RTCM3 spec.
obs2 = if member code l2codeToSBPSignalCode then
Just PackedObsContent
{ _packedObsContent_P = toP_L2 l1 l1e l2
, _packedObsContent_L = toL_L2 l1 l1e l2 l2e
, _packedObsContent_cn0 = toCn0_L2 l2e
, _packedObsContent_lock = toLock_L2 l2
, _packedObsContent_sid = GnssSignal
{ _gnssSignal_sat = fromIntegral $ sat - 1
, _gnssSignal_code = l2codeToSBPSignalCode ! code
, _gnssSignal_reserved = 0
}
}
else
Nothing
-- | Convert an RTCM L1+L2 1004 observation into multiple SBP MsgObs.
--
-- This chunking takes places because the number of observations in a given 1004
-- may very well exceed the maximum SBP supported payload size of 255 bytes.
fromMsg1004 :: MonadIO m => Msg1004 -> m [MsgObs]
fromMsg1004 m = do
let obs = concat $ mapMaybe fromObservation1004 $ m ^. msg1004_observations
chunks = zip [0..] $ chunksOf maxObsPerMessage obs
totalMsgs = fromIntegral $ length chunks
mapM (\(n, packed) -> chunkToMsgObs m totalMsgs n packed) chunks
-- | Convert an RTCM 1005 antenna reference position message into an SBP
-- MsgBasePosEcef.
fromMsg1005 :: MonadIO m => Msg1005 -> m MsgBasePosEcef
fromMsg1005 m =
return MsgBasePosEcef
{ _msgBasePosEcef_x = fromEcefVal $ m ^. msg1005_reference ^. antennaReference_ecef_x
, _msgBasePosEcef_y = fromEcefVal $ m ^. msg1005_reference ^. antennaReference_ecef_y
, _msgBasePosEcef_z = fromEcefVal $ m ^. msg1005_reference ^. antennaReference_ecef_z
}
-- | Convert an RTCM 1006 antenna reference position message into an SBP
-- MsgBasePosEcef.
fromMsg1006 :: MonadIO m => Msg1006 -> m MsgBasePosEcef
fromMsg1006 m =
return MsgBasePosEcef
{ _msgBasePosEcef_x = fromEcefVal $ m ^. msg1006_reference ^. antennaReference_ecef_x
, _msgBasePosEcef_y = fromEcefVal $ m ^. msg1006_reference ^. antennaReference_ecef_y
, _msgBasePosEcef_z = fromEcefVal $ m ^. msg1006_reference ^. antennaReference_ecef_z
}
-- | Convert an RTCM message into possibly multiple SBP messages.
--
convert :: MonadIO m => RTCM3Msg -> m (Maybe [SBPMsg])
convert = \case
(RTCM3Msg1002 m _rtcm3) -> do
let sender = m ^. msg1002_header ^. gpsObservationHeader_station
m' <- fromMsg1002 m
return $ Just [SBPMsgObs m' $ toSBP m' $ toSender sender]
(RTCM3Msg1004 m _rtcm3) -> do
let sender = m ^. msg1004_header ^. gpsObservationHeader_station
m' <- fromMsg1004 m
return $ Just (fmap (\x -> SBPMsgObs x $ toSBP x $ toSender sender) m')
(RTCM3Msg1005 m _rtcm3) -> do
let sender = m ^. msg1005_reference ^. antennaReference_station
m' <- fromMsg1005 m
return $ Just [SBPMsgBasePosEcef m' $ toSBP m' $ toSender sender]
(RTCM3Msg1006 m _rtcm3) -> do
let sender = m ^. msg1006_reference ^. antennaReference_station
m' <- fromMsg1006 m
return $ Just [SBPMsgBasePosEcef m' $ toSBP m' $ toSender sender]
_rtcm3Msg -> return Nothing