PrintOperation.hs


{- |
Copyright  : Will Thompson, Iñaki García Etxebarria and Jonas Platte
License    : LGPL-2.1
Maintainer : Iñaki García Etxebarria (inaki@blueleaf.cc)

/No description available in the introspection data./
-}

#define ENABLE_OVERLOADING (MIN_VERSION_haskell_gi_overloading(1,0,0) \
       && !defined(__HADDOCK_VERSION__))

module GI.WebKit2.Objects.PrintOperation
    ( 

-- * Exported types
    PrintOperation(..)                      ,
    IsPrintOperation                        ,
    toPrintOperation                        ,
    noPrintOperation                        ,


 -- * Methods
-- ** getPageSetup #method:getPageSetup#

#if ENABLE_OVERLOADING
    PrintOperationGetPageSetupMethodInfo    ,
#endif
    printOperationGetPageSetup              ,


-- ** getPrintSettings #method:getPrintSettings#

#if ENABLE_OVERLOADING
    PrintOperationGetPrintSettingsMethodInfo,
#endif
    printOperationGetPrintSettings          ,


-- ** new #method:new#

    printOperationNew                       ,


-- ** print #method:print#

#if ENABLE_OVERLOADING
    PrintOperationPrintMethodInfo           ,
#endif
    printOperationPrint                     ,


-- ** runDialog #method:runDialog#

#if ENABLE_OVERLOADING
    PrintOperationRunDialogMethodInfo       ,
#endif
    printOperationRunDialog                 ,


-- ** setPageSetup #method:setPageSetup#

#if ENABLE_OVERLOADING
    PrintOperationSetPageSetupMethodInfo    ,
#endif
    printOperationSetPageSetup              ,


-- ** setPrintSettings #method:setPrintSettings#

#if ENABLE_OVERLOADING
    PrintOperationSetPrintSettingsMethodInfo,
#endif
    printOperationSetPrintSettings          ,




 -- * Properties
-- ** pageSetup #attr:pageSetup#
{- | The initial 'GI.Gtk.Objects.PageSetup.PageSetup' for the print operation.
-}
#if ENABLE_OVERLOADING
    PrintOperationPageSetupPropertyInfo     ,
#endif
    constructPrintOperationPageSetup        ,
    getPrintOperationPageSetup              ,
#if ENABLE_OVERLOADING
    printOperationPageSetup                 ,
#endif
    setPrintOperationPageSetup              ,


-- ** printSettings #attr:printSettings#
{- | The initial 'GI.Gtk.Objects.PrintSettings.PrintSettings' for the print operation.
-}
#if ENABLE_OVERLOADING
    PrintOperationPrintSettingsPropertyInfo ,
#endif
    constructPrintOperationPrintSettings    ,
    getPrintOperationPrintSettings          ,
#if ENABLE_OVERLOADING
    printOperationPrintSettings             ,
#endif
    setPrintOperationPrintSettings          ,


-- ** webView #attr:webView#
{- | The 'GI.WebKit2.Objects.WebView.WebView' that will be printed.
-}
#if ENABLE_OVERLOADING
    PrintOperationWebViewPropertyInfo       ,
#endif
    constructPrintOperationWebView          ,
    getPrintOperationWebView                ,
#if ENABLE_OVERLOADING
    printOperationWebView                   ,
#endif




 -- * Signals
-- ** createCustomWidget #signal:createCustomWidget#

    C_PrintOperationCreateCustomWidgetCallback,
    PrintOperationCreateCustomWidgetCallback,
#if ENABLE_OVERLOADING
    PrintOperationCreateCustomWidgetSignalInfo,
#endif
    afterPrintOperationCreateCustomWidget   ,
    genClosure_PrintOperationCreateCustomWidget,
    mk_PrintOperationCreateCustomWidgetCallback,
    noPrintOperationCreateCustomWidgetCallback,
    onPrintOperationCreateCustomWidget      ,
    wrap_PrintOperationCreateCustomWidgetCallback,


-- ** failed #signal:failed#

    C_PrintOperationFailedCallback          ,
    PrintOperationFailedCallback            ,
#if ENABLE_OVERLOADING
    PrintOperationFailedSignalInfo          ,
#endif
    afterPrintOperationFailed               ,
    genClosure_PrintOperationFailed         ,
    mk_PrintOperationFailedCallback         ,
    noPrintOperationFailedCallback          ,
    onPrintOperationFailed                  ,
    wrap_PrintOperationFailedCallback       ,


-- ** finished #signal:finished#

    C_PrintOperationFinishedCallback        ,
    PrintOperationFinishedCallback          ,
#if ENABLE_OVERLOADING
    PrintOperationFinishedSignalInfo        ,
#endif
    afterPrintOperationFinished             ,
    genClosure_PrintOperationFinished       ,
    mk_PrintOperationFinishedCallback       ,
    noPrintOperationFinishedCallback        ,
    onPrintOperationFinished                ,
    wrap_PrintOperationFinishedCallback     ,




    ) where

import Data.GI.Base.ShortPrelude
import qualified Data.GI.Base.ShortPrelude as SP
import qualified Data.GI.Base.Overloading as O
import qualified Prelude as P

import qualified Data.GI.Base.Attributes as GI.Attributes
import qualified Data.GI.Base.ManagedPtr as B.ManagedPtr
import qualified Data.GI.Base.GClosure as B.GClosure
import qualified Data.GI.Base.GError as B.GError
import qualified Data.GI.Base.GVariant as B.GVariant
import qualified Data.GI.Base.GValue as B.GValue
import qualified Data.GI.Base.GParamSpec as B.GParamSpec
import qualified Data.GI.Base.CallStack as B.CallStack
import qualified Data.GI.Base.Properties as B.Properties
import qualified Data.Text as T
import qualified Data.ByteString.Char8 as B
import qualified Data.Map as Map
import qualified Foreign.Ptr as FP
import qualified GHC.OverloadedLabels as OL

import qualified GI.GObject.Objects.Object as GObject.Object
import qualified GI.Gtk.Objects.PageSetup as Gtk.PageSetup
import qualified GI.Gtk.Objects.PrintSettings as Gtk.PrintSettings
import qualified GI.Gtk.Objects.Window as Gtk.Window
import {-# SOURCE #-} qualified GI.WebKit2.Enums as WebKit2.Enums
import {-# SOURCE #-} qualified GI.WebKit2.Objects.PrintCustomWidget as WebKit2.PrintCustomWidget
import {-# SOURCE #-} qualified GI.WebKit2.Objects.WebView as WebKit2.WebView

-- | Memory-managed wrapper type.
newtype PrintOperation = PrintOperation (ManagedPtr PrintOperation)
foreign import ccall "webkit_print_operation_get_type"
    c_webkit_print_operation_get_type :: IO GType

instance GObject PrintOperation where
    gobjectType = c_webkit_print_operation_get_type
    

-- | Type class for types which can be safely cast to `PrintOperation`, for instance with `toPrintOperation`.
class (GObject o, O.IsDescendantOf PrintOperation o) => IsPrintOperation o
instance (GObject o, O.IsDescendantOf PrintOperation o) => IsPrintOperation o

instance O.HasParentTypes PrintOperation
type instance O.ParentTypes PrintOperation = '[GObject.Object.Object]

-- | Cast to `PrintOperation`, for types for which this is known to be safe. For general casts, use `Data.GI.Base.ManagedPtr.castTo`.
toPrintOperation :: (MonadIO m, IsPrintOperation o) => o -> m PrintOperation
toPrintOperation = liftIO . unsafeCastTo PrintOperation

-- | A convenience alias for `Nothing` :: `Maybe` `PrintOperation`.
noPrintOperation :: Maybe PrintOperation
noPrintOperation = Nothing

#if ENABLE_OVERLOADING
type family ResolvePrintOperationMethod (t :: Symbol) (o :: *) :: * where
    ResolvePrintOperationMethod "bindProperty" o = GObject.Object.ObjectBindPropertyMethodInfo
    ResolvePrintOperationMethod "bindPropertyFull" o = GObject.Object.ObjectBindPropertyFullMethodInfo
    ResolvePrintOperationMethod "forceFloating" o = GObject.Object.ObjectForceFloatingMethodInfo
    ResolvePrintOperationMethod "freezeNotify" o = GObject.Object.ObjectFreezeNotifyMethodInfo
    ResolvePrintOperationMethod "getv" o = GObject.Object.ObjectGetvMethodInfo
    ResolvePrintOperationMethod "isFloating" o = GObject.Object.ObjectIsFloatingMethodInfo
    ResolvePrintOperationMethod "notify" o = GObject.Object.ObjectNotifyMethodInfo
    ResolvePrintOperationMethod "notifyByPspec" o = GObject.Object.ObjectNotifyByPspecMethodInfo
    ResolvePrintOperationMethod "print" o = PrintOperationPrintMethodInfo
    ResolvePrintOperationMethod "ref" o = GObject.Object.ObjectRefMethodInfo
    ResolvePrintOperationMethod "refSink" o = GObject.Object.ObjectRefSinkMethodInfo
    ResolvePrintOperationMethod "runDialog" o = PrintOperationRunDialogMethodInfo
    ResolvePrintOperationMethod "runDispose" o = GObject.Object.ObjectRunDisposeMethodInfo
    ResolvePrintOperationMethod "stealData" o = GObject.Object.ObjectStealDataMethodInfo
    ResolvePrintOperationMethod "stealQdata" o = GObject.Object.ObjectStealQdataMethodInfo
    ResolvePrintOperationMethod "thawNotify" o = GObject.Object.ObjectThawNotifyMethodInfo
    ResolvePrintOperationMethod "unref" o = GObject.Object.ObjectUnrefMethodInfo
    ResolvePrintOperationMethod "watchClosure" o = GObject.Object.ObjectWatchClosureMethodInfo
    ResolvePrintOperationMethod "getData" o = GObject.Object.ObjectGetDataMethodInfo
    ResolvePrintOperationMethod "getPageSetup" o = PrintOperationGetPageSetupMethodInfo
    ResolvePrintOperationMethod "getPrintSettings" o = PrintOperationGetPrintSettingsMethodInfo
    ResolvePrintOperationMethod "getProperty" o = GObject.Object.ObjectGetPropertyMethodInfo
    ResolvePrintOperationMethod "getQdata" o = GObject.Object.ObjectGetQdataMethodInfo
    ResolvePrintOperationMethod "setData" o = GObject.Object.ObjectSetDataMethodInfo
    ResolvePrintOperationMethod "setPageSetup" o = PrintOperationSetPageSetupMethodInfo
    ResolvePrintOperationMethod "setPrintSettings" o = PrintOperationSetPrintSettingsMethodInfo
    ResolvePrintOperationMethod "setProperty" o = GObject.Object.ObjectSetPropertyMethodInfo
    ResolvePrintOperationMethod l o = O.MethodResolutionFailed l o

instance (info ~ ResolvePrintOperationMethod t PrintOperation, O.MethodInfo info PrintOperation p) => OL.IsLabel t (PrintOperation -> p) where
#if MIN_VERSION_base(4,10,0)
    fromLabel = O.overloadedMethod (O.MethodProxy :: O.MethodProxy info)
#else
    fromLabel _ = O.overloadedMethod (O.MethodProxy :: O.MethodProxy info)
#endif

#endif

-- signal PrintOperation::create-custom-widget
{- |
Emitted when displaying the print dialog with 'GI.WebKit2.Objects.PrintOperation.printOperationRunDialog'.
The returned 'GI.WebKit2.Objects.PrintCustomWidget.PrintCustomWidget' will be added to the print dialog and
it will be owned by the /@printOperation@/. However, the object is guaranteed
to be alive until the 'GI.WebKit2.Objects.PrintCustomWidget.PrintCustomWidget'::@/apply/@ is emitted.

/Since: 2.16/
-}
type PrintOperationCreateCustomWidgetCallback =
    IO WebKit2.PrintCustomWidget.PrintCustomWidget
    {- ^ __Returns:__ A 'GI.WebKit2.Objects.PrintCustomWidget.PrintCustomWidget' that will be embedded in the dialog. -}

-- | A convenience synonym for @`Nothing` :: `Maybe` `PrintOperationCreateCustomWidgetCallback`@.
noPrintOperationCreateCustomWidgetCallback :: Maybe PrintOperationCreateCustomWidgetCallback
noPrintOperationCreateCustomWidgetCallback = Nothing

-- | Type for the callback on the (unwrapped) C side.
type C_PrintOperationCreateCustomWidgetCallback =
    Ptr () ->                               -- object
    Ptr () ->                               -- user_data
    IO (Ptr WebKit2.PrintCustomWidget.PrintCustomWidget)

-- | Generate a function pointer callable from C code, from a `C_PrintOperationCreateCustomWidgetCallback`.
foreign import ccall "wrapper"
    mk_PrintOperationCreateCustomWidgetCallback :: C_PrintOperationCreateCustomWidgetCallback -> IO (FunPtr C_PrintOperationCreateCustomWidgetCallback)

-- | Wrap the callback into a `GClosure`.
genClosure_PrintOperationCreateCustomWidget :: MonadIO m => PrintOperationCreateCustomWidgetCallback -> m (GClosure C_PrintOperationCreateCustomWidgetCallback)
genClosure_PrintOperationCreateCustomWidget cb = liftIO $ do
    let cb' = wrap_PrintOperationCreateCustomWidgetCallback cb
    mk_PrintOperationCreateCustomWidgetCallback cb' >>= B.GClosure.newGClosure


-- | Wrap a `PrintOperationCreateCustomWidgetCallback` into a `C_PrintOperationCreateCustomWidgetCallback`.
wrap_PrintOperationCreateCustomWidgetCallback ::
    PrintOperationCreateCustomWidgetCallback ->
    C_PrintOperationCreateCustomWidgetCallback
wrap_PrintOperationCreateCustomWidgetCallback _cb _ _ = do
    result <- _cb 
    result' <- B.ManagedPtr.disownObject result
    return result'


{- |
Connect a signal handler for the “@create-custom-widget@” signal, to be run before the default handler.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Signals.on' printOperation #createCustomWidget callback
@
-}
onPrintOperationCreateCustomWidget :: (IsPrintOperation a, MonadIO m) => a -> PrintOperationCreateCustomWidgetCallback -> m SignalHandlerId
onPrintOperationCreateCustomWidget obj cb = liftIO $ do
    let cb' = wrap_PrintOperationCreateCustomWidgetCallback cb
    cb'' <- mk_PrintOperationCreateCustomWidgetCallback cb'
    connectSignalFunPtr obj "create-custom-widget" cb'' SignalConnectBefore

{- |
Connect a signal handler for the “@create-custom-widget@” signal, to be run after the default handler.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Signals.after' printOperation #createCustomWidget callback
@
-}
afterPrintOperationCreateCustomWidget :: (IsPrintOperation a, MonadIO m) => a -> PrintOperationCreateCustomWidgetCallback -> m SignalHandlerId
afterPrintOperationCreateCustomWidget obj cb = liftIO $ do
    let cb' = wrap_PrintOperationCreateCustomWidgetCallback cb
    cb'' <- mk_PrintOperationCreateCustomWidgetCallback cb'
    connectSignalFunPtr obj "create-custom-widget" cb'' SignalConnectAfter


-- signal PrintOperation::failed
{- |
Emitted when an error occurs while printing. The given /@error@/, of the domain
@/WEBKIT_PRINT_ERROR/@, contains further details of the failure.
The 'GI.WebKit2.Objects.PrintOperation.PrintOperation'::@/finished/@ signal is emitted after this one.
-}
type PrintOperationFailedCallback =
    GError
    {- ^ /@error@/: the 'GError' that was triggered -}
    -> IO ()

-- | A convenience synonym for @`Nothing` :: `Maybe` `PrintOperationFailedCallback`@.
noPrintOperationFailedCallback :: Maybe PrintOperationFailedCallback
noPrintOperationFailedCallback = Nothing

-- | Type for the callback on the (unwrapped) C side.
type C_PrintOperationFailedCallback =
    Ptr () ->                               -- object
    Ptr GError ->
    Ptr () ->                               -- user_data
    IO ()

-- | Generate a function pointer callable from C code, from a `C_PrintOperationFailedCallback`.
foreign import ccall "wrapper"
    mk_PrintOperationFailedCallback :: C_PrintOperationFailedCallback -> IO (FunPtr C_PrintOperationFailedCallback)

-- | Wrap the callback into a `GClosure`.
genClosure_PrintOperationFailed :: MonadIO m => PrintOperationFailedCallback -> m (GClosure C_PrintOperationFailedCallback)
genClosure_PrintOperationFailed cb = liftIO $ do
    let cb' = wrap_PrintOperationFailedCallback cb
    mk_PrintOperationFailedCallback cb' >>= B.GClosure.newGClosure


-- | Wrap a `PrintOperationFailedCallback` into a `C_PrintOperationFailedCallback`.
wrap_PrintOperationFailedCallback ::
    PrintOperationFailedCallback ->
    C_PrintOperationFailedCallback
wrap_PrintOperationFailedCallback _cb _ error_ _ = do
    error_' <- (newBoxed GError) error_
    _cb  error_'


{- |
Connect a signal handler for the “@failed@” signal, to be run before the default handler.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Signals.on' printOperation #failed callback
@
-}
onPrintOperationFailed :: (IsPrintOperation a, MonadIO m) => a -> PrintOperationFailedCallback -> m SignalHandlerId
onPrintOperationFailed obj cb = liftIO $ do
    let cb' = wrap_PrintOperationFailedCallback cb
    cb'' <- mk_PrintOperationFailedCallback cb'
    connectSignalFunPtr obj "failed" cb'' SignalConnectBefore

{- |
Connect a signal handler for the “@failed@” signal, to be run after the default handler.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Signals.after' printOperation #failed callback
@
-}
afterPrintOperationFailed :: (IsPrintOperation a, MonadIO m) => a -> PrintOperationFailedCallback -> m SignalHandlerId
afterPrintOperationFailed obj cb = liftIO $ do
    let cb' = wrap_PrintOperationFailedCallback cb
    cb'' <- mk_PrintOperationFailedCallback cb'
    connectSignalFunPtr obj "failed" cb'' SignalConnectAfter


-- signal PrintOperation::finished
{- |
Emitted when the print operation has finished doing everything
required for printing.
-}
type PrintOperationFinishedCallback =
    IO ()

-- | A convenience synonym for @`Nothing` :: `Maybe` `PrintOperationFinishedCallback`@.
noPrintOperationFinishedCallback :: Maybe PrintOperationFinishedCallback
noPrintOperationFinishedCallback = Nothing

-- | Type for the callback on the (unwrapped) C side.
type C_PrintOperationFinishedCallback =
    Ptr () ->                               -- object
    Ptr () ->                               -- user_data
    IO ()

-- | Generate a function pointer callable from C code, from a `C_PrintOperationFinishedCallback`.
foreign import ccall "wrapper"
    mk_PrintOperationFinishedCallback :: C_PrintOperationFinishedCallback -> IO (FunPtr C_PrintOperationFinishedCallback)

-- | Wrap the callback into a `GClosure`.
genClosure_PrintOperationFinished :: MonadIO m => PrintOperationFinishedCallback -> m (GClosure C_PrintOperationFinishedCallback)
genClosure_PrintOperationFinished cb = liftIO $ do
    let cb' = wrap_PrintOperationFinishedCallback cb
    mk_PrintOperationFinishedCallback cb' >>= B.GClosure.newGClosure


-- | Wrap a `PrintOperationFinishedCallback` into a `C_PrintOperationFinishedCallback`.
wrap_PrintOperationFinishedCallback ::
    PrintOperationFinishedCallback ->
    C_PrintOperationFinishedCallback
wrap_PrintOperationFinishedCallback _cb _ _ = do
    _cb 


{- |
Connect a signal handler for the “@finished@” signal, to be run before the default handler.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Signals.on' printOperation #finished callback
@
-}
onPrintOperationFinished :: (IsPrintOperation a, MonadIO m) => a -> PrintOperationFinishedCallback -> m SignalHandlerId
onPrintOperationFinished obj cb = liftIO $ do
    let cb' = wrap_PrintOperationFinishedCallback cb
    cb'' <- mk_PrintOperationFinishedCallback cb'
    connectSignalFunPtr obj "finished" cb'' SignalConnectBefore

{- |
Connect a signal handler for the “@finished@” signal, to be run after the default handler.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Signals.after' printOperation #finished callback
@
-}
afterPrintOperationFinished :: (IsPrintOperation a, MonadIO m) => a -> PrintOperationFinishedCallback -> m SignalHandlerId
afterPrintOperationFinished obj cb = liftIO $ do
    let cb' = wrap_PrintOperationFinishedCallback cb
    cb'' <- mk_PrintOperationFinishedCallback cb'
    connectSignalFunPtr obj "finished" cb'' SignalConnectAfter


-- VVV Prop "page-setup"
   -- Type: TInterface (Name {namespace = "Gtk", name = "PageSetup"})
   -- Flags: [PropertyReadable,PropertyWritable]
   -- Nullable: (Just True,Just False)

{- |
Get the value of the “@page-setup@” property.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Attributes.get' printOperation #pageSetup
@
-}
getPrintOperationPageSetup :: (MonadIO m, IsPrintOperation o) => o -> m (Maybe Gtk.PageSetup.PageSetup)
getPrintOperationPageSetup obj = liftIO $ B.Properties.getObjectPropertyObject obj "page-setup" Gtk.PageSetup.PageSetup

{- |
Set the value of the “@page-setup@” property.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Attributes.set' printOperation [ #pageSetup 'Data.GI.Base.Attributes.:=' value ]
@
-}
setPrintOperationPageSetup :: (MonadIO m, IsPrintOperation o, Gtk.PageSetup.IsPageSetup a) => o -> a -> m ()
setPrintOperationPageSetup obj val = liftIO $ B.Properties.setObjectPropertyObject obj "page-setup" (Just val)

{- |
Construct a `GValueConstruct` with valid value for the “@page-setup@” property. This is rarely needed directly, but it is used by `Data.GI.Base.Constructible.new`.
-}
constructPrintOperationPageSetup :: (IsPrintOperation o, Gtk.PageSetup.IsPageSetup a) => a -> IO (GValueConstruct o)
constructPrintOperationPageSetup val = B.Properties.constructObjectPropertyObject "page-setup" (Just val)

#if ENABLE_OVERLOADING
data PrintOperationPageSetupPropertyInfo
instance AttrInfo PrintOperationPageSetupPropertyInfo where
    type AttrAllowedOps PrintOperationPageSetupPropertyInfo = '[ 'AttrSet, 'AttrConstruct, 'AttrGet]
    type AttrSetTypeConstraint PrintOperationPageSetupPropertyInfo = Gtk.PageSetup.IsPageSetup
    type AttrBaseTypeConstraint PrintOperationPageSetupPropertyInfo = IsPrintOperation
    type AttrGetType PrintOperationPageSetupPropertyInfo = (Maybe Gtk.PageSetup.PageSetup)
    type AttrLabel PrintOperationPageSetupPropertyInfo = "page-setup"
    type AttrOrigin PrintOperationPageSetupPropertyInfo = PrintOperation
    attrGet _ = getPrintOperationPageSetup
    attrSet _ = setPrintOperationPageSetup
    attrConstruct _ = constructPrintOperationPageSetup
    attrClear _ = undefined
#endif

-- VVV Prop "print-settings"
   -- Type: TInterface (Name {namespace = "Gtk", name = "PrintSettings"})
   -- Flags: [PropertyReadable,PropertyWritable]
   -- Nullable: (Just True,Just False)

{- |
Get the value of the “@print-settings@” property.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Attributes.get' printOperation #printSettings
@
-}
getPrintOperationPrintSettings :: (MonadIO m, IsPrintOperation o) => o -> m (Maybe Gtk.PrintSettings.PrintSettings)
getPrintOperationPrintSettings obj = liftIO $ B.Properties.getObjectPropertyObject obj "print-settings" Gtk.PrintSettings.PrintSettings

{- |
Set the value of the “@print-settings@” property.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Attributes.set' printOperation [ #printSettings 'Data.GI.Base.Attributes.:=' value ]
@
-}
setPrintOperationPrintSettings :: (MonadIO m, IsPrintOperation o, Gtk.PrintSettings.IsPrintSettings a) => o -> a -> m ()
setPrintOperationPrintSettings obj val = liftIO $ B.Properties.setObjectPropertyObject obj "print-settings" (Just val)

{- |
Construct a `GValueConstruct` with valid value for the “@print-settings@” property. This is rarely needed directly, but it is used by `Data.GI.Base.Constructible.new`.
-}
constructPrintOperationPrintSettings :: (IsPrintOperation o, Gtk.PrintSettings.IsPrintSettings a) => a -> IO (GValueConstruct o)
constructPrintOperationPrintSettings val = B.Properties.constructObjectPropertyObject "print-settings" (Just val)

#if ENABLE_OVERLOADING
data PrintOperationPrintSettingsPropertyInfo
instance AttrInfo PrintOperationPrintSettingsPropertyInfo where
    type AttrAllowedOps PrintOperationPrintSettingsPropertyInfo = '[ 'AttrSet, 'AttrConstruct, 'AttrGet]
    type AttrSetTypeConstraint PrintOperationPrintSettingsPropertyInfo = Gtk.PrintSettings.IsPrintSettings
    type AttrBaseTypeConstraint PrintOperationPrintSettingsPropertyInfo = IsPrintOperation
    type AttrGetType PrintOperationPrintSettingsPropertyInfo = (Maybe Gtk.PrintSettings.PrintSettings)
    type AttrLabel PrintOperationPrintSettingsPropertyInfo = "print-settings"
    type AttrOrigin PrintOperationPrintSettingsPropertyInfo = PrintOperation
    attrGet _ = getPrintOperationPrintSettings
    attrSet _ = setPrintOperationPrintSettings
    attrConstruct _ = constructPrintOperationPrintSettings
    attrClear _ = undefined
#endif

-- VVV Prop "web-view"
   -- Type: TInterface (Name {namespace = "WebKit2", name = "WebView"})
   -- Flags: [PropertyReadable,PropertyWritable,PropertyConstructOnly]
   -- Nullable: (Nothing,Nothing)

{- |
Get the value of the “@web-view@” property.
When <https://github.com/haskell-gi/haskell-gi/wiki/Overloading overloading> is enabled, this is equivalent to

@
'Data.GI.Base.Attributes.get' printOperation #webView
@
-}
getPrintOperationWebView :: (MonadIO m, IsPrintOperation o) => o -> m (Maybe WebKit2.WebView.WebView)
getPrintOperationWebView obj = liftIO $ B.Properties.getObjectPropertyObject obj "web-view" WebKit2.WebView.WebView

{- |
Construct a `GValueConstruct` with valid value for the “@web-view@” property. This is rarely needed directly, but it is used by `Data.GI.Base.Constructible.new`.
-}
constructPrintOperationWebView :: (IsPrintOperation o, WebKit2.WebView.IsWebView a) => a -> IO (GValueConstruct o)
constructPrintOperationWebView val = B.Properties.constructObjectPropertyObject "web-view" (Just val)

#if ENABLE_OVERLOADING
data PrintOperationWebViewPropertyInfo
instance AttrInfo PrintOperationWebViewPropertyInfo where
    type AttrAllowedOps PrintOperationWebViewPropertyInfo = '[ 'AttrConstruct, 'AttrGet, 'AttrClear]
    type AttrSetTypeConstraint PrintOperationWebViewPropertyInfo = WebKit2.WebView.IsWebView
    type AttrBaseTypeConstraint PrintOperationWebViewPropertyInfo = IsPrintOperation
    type AttrGetType PrintOperationWebViewPropertyInfo = (Maybe WebKit2.WebView.WebView)
    type AttrLabel PrintOperationWebViewPropertyInfo = "web-view"
    type AttrOrigin PrintOperationWebViewPropertyInfo = PrintOperation
    attrGet _ = getPrintOperationWebView
    attrSet _ = undefined
    attrConstruct _ = constructPrintOperationWebView
    attrClear _ = undefined
#endif

#if ENABLE_OVERLOADING
instance O.HasAttributeList PrintOperation
type instance O.AttributeList PrintOperation = PrintOperationAttributeList
type PrintOperationAttributeList = ('[ '("pageSetup", PrintOperationPageSetupPropertyInfo), '("printSettings", PrintOperationPrintSettingsPropertyInfo), '("webView", PrintOperationWebViewPropertyInfo)] :: [(Symbol, *)])
#endif

#if ENABLE_OVERLOADING
printOperationPageSetup :: AttrLabelProxy "pageSetup"
printOperationPageSetup = AttrLabelProxy

printOperationPrintSettings :: AttrLabelProxy "printSettings"
printOperationPrintSettings = AttrLabelProxy

printOperationWebView :: AttrLabelProxy "webView"
printOperationWebView = AttrLabelProxy

#endif

#if ENABLE_OVERLOADING
data PrintOperationCreateCustomWidgetSignalInfo
instance SignalInfo PrintOperationCreateCustomWidgetSignalInfo where
    type HaskellCallbackType PrintOperationCreateCustomWidgetSignalInfo = PrintOperationCreateCustomWidgetCallback
    connectSignal _ obj cb connectMode = do
        let cb' = wrap_PrintOperationCreateCustomWidgetCallback cb
        cb'' <- mk_PrintOperationCreateCustomWidgetCallback cb'
        connectSignalFunPtr obj "create-custom-widget" cb'' connectMode

data PrintOperationFailedSignalInfo
instance SignalInfo PrintOperationFailedSignalInfo where
    type HaskellCallbackType PrintOperationFailedSignalInfo = PrintOperationFailedCallback
    connectSignal _ obj cb connectMode = do
        let cb' = wrap_PrintOperationFailedCallback cb
        cb'' <- mk_PrintOperationFailedCallback cb'
        connectSignalFunPtr obj "failed" cb'' connectMode

data PrintOperationFinishedSignalInfo
instance SignalInfo PrintOperationFinishedSignalInfo where
    type HaskellCallbackType PrintOperationFinishedSignalInfo = PrintOperationFinishedCallback
    connectSignal _ obj cb connectMode = do
        let cb' = wrap_PrintOperationFinishedCallback cb
        cb'' <- mk_PrintOperationFinishedCallback cb'
        connectSignalFunPtr obj "finished" cb'' connectMode

type instance O.SignalList PrintOperation = PrintOperationSignalList
type PrintOperationSignalList = ('[ '("createCustomWidget", PrintOperationCreateCustomWidgetSignalInfo), '("failed", PrintOperationFailedSignalInfo), '("finished", PrintOperationFinishedSignalInfo), '("notify", GObject.Object.ObjectNotifySignalInfo)] :: [(Symbol, *)])

#endif

-- method PrintOperation::new
-- method type : Constructor
-- Args : [Arg {argCName = "web_view", argType = TInterface (Name {namespace = "WebKit2", name = "WebView"}), direction = DirectionIn, mayBeNull = False, argDoc = Documentation {rawDocText = Just "a #WebKitWebView", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing}]
-- Lengths : []
-- returnType : Just (TInterface (Name {namespace = "WebKit2", name = "PrintOperation"}))
-- throws : False
-- Skip return : False

foreign import ccall "webkit_print_operation_new" webkit_print_operation_new :: 
    Ptr WebKit2.WebView.WebView ->          -- web_view : TInterface (Name {namespace = "WebKit2", name = "WebView"})
    IO (Ptr PrintOperation)

{- |
Create a new 'GI.WebKit2.Objects.PrintOperation.PrintOperation' to print /@webView@/ contents.
-}
printOperationNew ::
    (B.CallStack.HasCallStack, MonadIO m, WebKit2.WebView.IsWebView a) =>
    a
    {- ^ /@webView@/: a 'GI.WebKit2.Objects.WebView.WebView' -}
    -> m PrintOperation
    {- ^ __Returns:__ a new 'GI.WebKit2.Objects.PrintOperation.PrintOperation'. -}
printOperationNew webView = liftIO $ do
    webView' <- unsafeManagedPtrCastPtr webView
    result <- webkit_print_operation_new webView'
    checkUnexpectedReturnNULL "printOperationNew" result
    result' <- (wrapObject PrintOperation) result
    touchManagedPtr webView
    return result'

#if ENABLE_OVERLOADING
#endif

-- method PrintOperation::get_page_setup
-- method type : OrdinaryMethod
-- Args : [Arg {argCName = "print_operation", argType = TInterface (Name {namespace = "WebKit2", name = "PrintOperation"}), direction = DirectionIn, mayBeNull = False, argDoc = Documentation {rawDocText = Just "a #WebKitPrintOperation", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing}]
-- Lengths : []
-- returnType : Just (TInterface (Name {namespace = "Gtk", name = "PageSetup"}))
-- throws : False
-- Skip return : False

foreign import ccall "webkit_print_operation_get_page_setup" webkit_print_operation_get_page_setup :: 
    Ptr PrintOperation ->                   -- print_operation : TInterface (Name {namespace = "WebKit2", name = "PrintOperation"})
    IO (Ptr Gtk.PageSetup.PageSetup)

{- |
Return the current page setup of /@printOperation@/. It returns 'Nothing' until
either 'GI.WebKit2.Objects.PrintOperation.printOperationSetPageSetup' or 'GI.WebKit2.Objects.PrintOperation.printOperationRunDialog'
have been called.
-}
printOperationGetPageSetup ::
    (B.CallStack.HasCallStack, MonadIO m, IsPrintOperation a) =>
    a
    {- ^ /@printOperation@/: a 'GI.WebKit2.Objects.PrintOperation.PrintOperation' -}
    -> m (Maybe Gtk.PageSetup.PageSetup)
    {- ^ __Returns:__ the current 'GI.Gtk.Objects.PageSetup.PageSetup' of /@printOperation@/. -}
printOperationGetPageSetup printOperation = liftIO $ do
    printOperation' <- unsafeManagedPtrCastPtr printOperation
    result <- webkit_print_operation_get_page_setup printOperation'
    maybeResult <- convertIfNonNull result $ \result' -> do
        result'' <- (newObject Gtk.PageSetup.PageSetup) result'
        return result''
    touchManagedPtr printOperation
    return maybeResult

#if ENABLE_OVERLOADING
data PrintOperationGetPageSetupMethodInfo
instance (signature ~ (m (Maybe Gtk.PageSetup.PageSetup)), MonadIO m, IsPrintOperation a) => O.MethodInfo PrintOperationGetPageSetupMethodInfo a signature where
    overloadedMethod _ = printOperationGetPageSetup

#endif

-- method PrintOperation::get_print_settings
-- method type : OrdinaryMethod
-- Args : [Arg {argCName = "print_operation", argType = TInterface (Name {namespace = "WebKit2", name = "PrintOperation"}), direction = DirectionIn, mayBeNull = False, argDoc = Documentation {rawDocText = Just "a #WebKitPrintOperation", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing}]
-- Lengths : []
-- returnType : Just (TInterface (Name {namespace = "Gtk", name = "PrintSettings"}))
-- throws : False
-- Skip return : False

foreign import ccall "webkit_print_operation_get_print_settings" webkit_print_operation_get_print_settings :: 
    Ptr PrintOperation ->                   -- print_operation : TInterface (Name {namespace = "WebKit2", name = "PrintOperation"})
    IO (Ptr Gtk.PrintSettings.PrintSettings)

{- |
Return the current print settings of /@printOperation@/. It returns 'Nothing' until
either 'GI.WebKit2.Objects.PrintOperation.printOperationSetPrintSettings' or 'GI.WebKit2.Objects.PrintOperation.printOperationRunDialog'
have been called.
-}
printOperationGetPrintSettings ::
    (B.CallStack.HasCallStack, MonadIO m, IsPrintOperation a) =>
    a
    {- ^ /@printOperation@/: a 'GI.WebKit2.Objects.PrintOperation.PrintOperation' -}
    -> m (Maybe Gtk.PrintSettings.PrintSettings)
    {- ^ __Returns:__ the current 'GI.Gtk.Objects.PrintSettings.PrintSettings' of /@printOperation@/. -}
printOperationGetPrintSettings printOperation = liftIO $ do
    printOperation' <- unsafeManagedPtrCastPtr printOperation
    result <- webkit_print_operation_get_print_settings printOperation'
    maybeResult <- convertIfNonNull result $ \result' -> do
        result'' <- (newObject Gtk.PrintSettings.PrintSettings) result'
        return result''
    touchManagedPtr printOperation
    return maybeResult

#if ENABLE_OVERLOADING
data PrintOperationGetPrintSettingsMethodInfo
instance (signature ~ (m (Maybe Gtk.PrintSettings.PrintSettings)), MonadIO m, IsPrintOperation a) => O.MethodInfo PrintOperationGetPrintSettingsMethodInfo a signature where
    overloadedMethod _ = printOperationGetPrintSettings

#endif

-- method PrintOperation::print
-- method type : OrdinaryMethod
-- Args : [Arg {argCName = "print_operation", argType = TInterface (Name {namespace = "WebKit2", name = "PrintOperation"}), direction = DirectionIn, mayBeNull = False, argDoc = Documentation {rawDocText = Just "a #WebKitPrintOperation", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing}]
-- Lengths : []
-- returnType : Nothing
-- throws : False
-- Skip return : False

foreign import ccall "webkit_print_operation_print" webkit_print_operation_print :: 
    Ptr PrintOperation ->                   -- print_operation : TInterface (Name {namespace = "WebKit2", name = "PrintOperation"})
    IO ()

{- |
Start a print operation using current print settings and page setup
without showing the print dialog. If either print settings or page setup
are not set with 'GI.WebKit2.Objects.PrintOperation.printOperationSetPrintSettings' and
'GI.WebKit2.Objects.PrintOperation.printOperationSetPageSetup', the default options will be used
and the print job will be sent to the default printer.
The 'GI.WebKit2.Objects.PrintOperation.PrintOperation'::@/finished/@ signal is emitted when the printing
operation finishes. If an error occurs while printing the signal
'GI.WebKit2.Objects.PrintOperation.PrintOperation'::@/failed/@ is emitted before 'GI.WebKit2.Objects.PrintOperation.PrintOperation'::@/finished/@.
-}
printOperationPrint ::
    (B.CallStack.HasCallStack, MonadIO m, IsPrintOperation a) =>
    a
    {- ^ /@printOperation@/: a 'GI.WebKit2.Objects.PrintOperation.PrintOperation' -}
    -> m ()
printOperationPrint printOperation = liftIO $ do
    printOperation' <- unsafeManagedPtrCastPtr printOperation
    webkit_print_operation_print printOperation'
    touchManagedPtr printOperation
    return ()

#if ENABLE_OVERLOADING
data PrintOperationPrintMethodInfo
instance (signature ~ (m ()), MonadIO m, IsPrintOperation a) => O.MethodInfo PrintOperationPrintMethodInfo a signature where
    overloadedMethod _ = printOperationPrint

#endif

-- method PrintOperation::run_dialog
-- method type : OrdinaryMethod
-- Args : [Arg {argCName = "print_operation", argType = TInterface (Name {namespace = "WebKit2", name = "PrintOperation"}), direction = DirectionIn, mayBeNull = False, argDoc = Documentation {rawDocText = Just "a #WebKitPrintOperation", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing},Arg {argCName = "parent", argType = TInterface (Name {namespace = "Gtk", name = "Window"}), direction = DirectionIn, mayBeNull = True, argDoc = Documentation {rawDocText = Just "transient parent of the print dialog", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing}]
-- Lengths : []
-- returnType : Just (TInterface (Name {namespace = "WebKit2", name = "PrintOperationResponse"}))
-- throws : False
-- Skip return : False

foreign import ccall "webkit_print_operation_run_dialog" webkit_print_operation_run_dialog :: 
    Ptr PrintOperation ->                   -- print_operation : TInterface (Name {namespace = "WebKit2", name = "PrintOperation"})
    Ptr Gtk.Window.Window ->                -- parent : TInterface (Name {namespace = "Gtk", name = "Window"})
    IO CUInt

{- |
Run the print dialog and start printing using the options selected by
the user. This method returns when the print dialog is closed.
If the print dialog is cancelled 'GI.WebKit2.Enums.PrintOperationResponseCancel'
is returned. If the user clicks on the print button, 'GI.WebKit2.Enums.PrintOperationResponsePrint'
is returned and the print operation starts. In this case, the 'GI.WebKit2.Objects.PrintOperation.PrintOperation'::@/finished/@
signal is emitted when the operation finishes. If an error occurs while printing, the signal
'GI.WebKit2.Objects.PrintOperation.PrintOperation'::@/failed/@ is emitted before 'GI.WebKit2.Objects.PrintOperation.PrintOperation'::@/finished/@.
If the print dialog is not cancelled current print settings and page setup of /@printOperation@/
are updated with options selected by the user when Print button is pressed in print dialog.
You can get the updated print settings and page setup by calling
'GI.WebKit2.Objects.PrintOperation.printOperationGetPrintSettings' and 'GI.WebKit2.Objects.PrintOperation.printOperationGetPageSetup'
after this method.
-}
printOperationRunDialog ::
    (B.CallStack.HasCallStack, MonadIO m, IsPrintOperation a, Gtk.Window.IsWindow b) =>
    a
    {- ^ /@printOperation@/: a 'GI.WebKit2.Objects.PrintOperation.PrintOperation' -}
    -> Maybe (b)
    {- ^ /@parent@/: transient parent of the print dialog -}
    -> m WebKit2.Enums.PrintOperationResponse
    {- ^ __Returns:__ the 'GI.WebKit2.Enums.PrintOperationResponse' of the print dialog -}
printOperationRunDialog printOperation parent = liftIO $ do
    printOperation' <- unsafeManagedPtrCastPtr printOperation
    maybeParent <- case parent of
        Nothing -> return nullPtr
        Just jParent -> do
            jParent' <- unsafeManagedPtrCastPtr jParent
            return jParent'
    result <- webkit_print_operation_run_dialog printOperation' maybeParent
    let result' = (toEnum . fromIntegral) result
    touchManagedPtr printOperation
    whenJust parent touchManagedPtr
    return result'

#if ENABLE_OVERLOADING
data PrintOperationRunDialogMethodInfo
instance (signature ~ (Maybe (b) -> m WebKit2.Enums.PrintOperationResponse), MonadIO m, IsPrintOperation a, Gtk.Window.IsWindow b) => O.MethodInfo PrintOperationRunDialogMethodInfo a signature where
    overloadedMethod _ = printOperationRunDialog

#endif

-- method PrintOperation::set_page_setup
-- method type : OrdinaryMethod
-- Args : [Arg {argCName = "print_operation", argType = TInterface (Name {namespace = "WebKit2", name = "PrintOperation"}), direction = DirectionIn, mayBeNull = False, argDoc = Documentation {rawDocText = Just "a #WebKitPrintOperation", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing},Arg {argCName = "page_setup", argType = TInterface (Name {namespace = "Gtk", name = "PageSetup"}), direction = DirectionIn, mayBeNull = False, argDoc = Documentation {rawDocText = Just "a #GtkPageSetup to set", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing}]
-- Lengths : []
-- returnType : Nothing
-- throws : False
-- Skip return : False

foreign import ccall "webkit_print_operation_set_page_setup" webkit_print_operation_set_page_setup :: 
    Ptr PrintOperation ->                   -- print_operation : TInterface (Name {namespace = "WebKit2", name = "PrintOperation"})
    Ptr Gtk.PageSetup.PageSetup ->          -- page_setup : TInterface (Name {namespace = "Gtk", name = "PageSetup"})
    IO ()

{- |
Set the current page setup of /@printOperation@/. Current page setup is used for the
initial values of the print dialog when 'GI.WebKit2.Objects.PrintOperation.printOperationRunDialog' is called.
-}
printOperationSetPageSetup ::
    (B.CallStack.HasCallStack, MonadIO m, IsPrintOperation a, Gtk.PageSetup.IsPageSetup b) =>
    a
    {- ^ /@printOperation@/: a 'GI.WebKit2.Objects.PrintOperation.PrintOperation' -}
    -> b
    {- ^ /@pageSetup@/: a 'GI.Gtk.Objects.PageSetup.PageSetup' to set -}
    -> m ()
printOperationSetPageSetup printOperation pageSetup = liftIO $ do
    printOperation' <- unsafeManagedPtrCastPtr printOperation
    pageSetup' <- unsafeManagedPtrCastPtr pageSetup
    webkit_print_operation_set_page_setup printOperation' pageSetup'
    touchManagedPtr printOperation
    touchManagedPtr pageSetup
    return ()

#if ENABLE_OVERLOADING
data PrintOperationSetPageSetupMethodInfo
instance (signature ~ (b -> m ()), MonadIO m, IsPrintOperation a, Gtk.PageSetup.IsPageSetup b) => O.MethodInfo PrintOperationSetPageSetupMethodInfo a signature where
    overloadedMethod _ = printOperationSetPageSetup

#endif

-- method PrintOperation::set_print_settings
-- method type : OrdinaryMethod
-- Args : [Arg {argCName = "print_operation", argType = TInterface (Name {namespace = "WebKit2", name = "PrintOperation"}), direction = DirectionIn, mayBeNull = False, argDoc = Documentation {rawDocText = Just "a #WebKitPrintOperation", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing},Arg {argCName = "print_settings", argType = TInterface (Name {namespace = "Gtk", name = "PrintSettings"}), direction = DirectionIn, mayBeNull = False, argDoc = Documentation {rawDocText = Just "a #GtkPrintSettings to set", sinceVersion = Nothing}, argScope = ScopeTypeInvalid, argClosure = -1, argDestroy = -1, argCallerAllocates = False, transfer = TransferNothing}]
-- Lengths : []
-- returnType : Nothing
-- throws : False
-- Skip return : False

foreign import ccall "webkit_print_operation_set_print_settings" webkit_print_operation_set_print_settings :: 
    Ptr PrintOperation ->                   -- print_operation : TInterface (Name {namespace = "WebKit2", name = "PrintOperation"})
    Ptr Gtk.PrintSettings.PrintSettings ->  -- print_settings : TInterface (Name {namespace = "Gtk", name = "PrintSettings"})
    IO ()

{- |
Set the current print settings of /@printOperation@/. Current print settings are used for
the initial values of the print dialog when 'GI.WebKit2.Objects.PrintOperation.printOperationRunDialog' is called.
-}
printOperationSetPrintSettings ::
    (B.CallStack.HasCallStack, MonadIO m, IsPrintOperation a, Gtk.PrintSettings.IsPrintSettings b) =>
    a
    {- ^ /@printOperation@/: a 'GI.WebKit2.Objects.PrintOperation.PrintOperation' -}
    -> b
    {- ^ /@printSettings@/: a 'GI.Gtk.Objects.PrintSettings.PrintSettings' to set -}
    -> m ()
printOperationSetPrintSettings printOperation printSettings = liftIO $ do
    printOperation' <- unsafeManagedPtrCastPtr printOperation
    printSettings' <- unsafeManagedPtrCastPtr printSettings
    webkit_print_operation_set_print_settings printOperation' printSettings'
    touchManagedPtr printOperation
    touchManagedPtr printSettings
    return ()

#if ENABLE_OVERLOADING
data PrintOperationSetPrintSettingsMethodInfo
instance (signature ~ (b -> m ()), MonadIO m, IsPrintOperation a, Gtk.PrintSettings.IsPrintSettings b) => O.MethodInfo PrintOperationSetPrintSettingsMethodInfo a signature where
    overloadedMethod _ = printOperationSetPrintSettings

#endif