d10-0.2.1.4: src/Data/D10/Safe.hs
{-# LANGUAGE DeriveLift #-}
{-# LANGUAGE TemplateHaskell #-}
{-# LANGUAGE TypeApplications #-}
-- | Defines a 'D10' type as
-- @'D0' | 'D1' | 'D2' | 'D3' | 'D4' | 'D5' | 'D6' | 'D7' | 'D8' | 'D9'@.
--
-- The following modules define @D10@ types in different ways
-- but are otherwise very similar to this one:
--
-- * "Data.D10.Char"
-- * "Data.D10.Num"
--
-- This module is called "safe" because, in contrast with the
-- alternative representations of a digit defined in the other
-- modules, this 'D10' type does not include any possibility
-- of representing an invalid non-digit value.
module Data.D10.Safe
(
-- * Type
D10 (..)
-- $bounded
-- $enum
-- * Quasi-quoters
, d10
, d10list
-- * Splice expressions
, d10Exp
, d10ListExp
-- * Splice patterns
, d10Pat
, d10ListPat
-- * Converting between D10 and Char
, d10Char
, charD10Maybe
, charD10Either
, charD10Fail
-- * Converting between D10 and String
, d10Str
, strD10Maybe
, strD10Either
, strD10Fail
-- * Converting between [D10] and String
, strD10ListMaybe
, strD10ListEither
, strD10ListFail
-- * Converting between D10 and Natural
, d10Nat
, natD10Maybe
, natD10Either
, natD10Fail
, natMod10
-- * Converting between D10 and Integer
, d10Integer
, integerD10Maybe
, integerD10Either
, integerD10Fail
, integerMod10
-- * Converting between D10 and Int
, d10Int
, intD10Maybe
, intD10Either
, intD10Fail
, intMod10
-- * Converting between D10 and general numeric types
, d10Num
, integralD10Maybe
, integralD10Either
, integralD10Fail
, integralMod10
-- * Modular arithmetic
, (+), (-), (*)
) where
import Data.D10.Predicate
-- base
import Control.Monad ((>=>))
import Control.Monad.Fail (MonadFail (fail))
import Data.Char (chr, ord)
import Data.Monoid (Endo (..))
import GHC.Generics (Generic)
import Numeric.Natural (Natural)
import Prelude hiding (fail, (+), (-), (*))
import qualified Prelude as P
-- template-haskell
import Language.Haskell.TH.Quote (QuasiQuoter (..))
import Language.Haskell.TH.Syntax (Exp (..), Lift (lift), Lit (..), Pat (..), Q)
-- $setup
-- >>> :set -XQuasiQuotes
-- >>> :set -XTemplateHaskell
-- >>> :set -fno-warn-overlapping-patterns
---------------------------------------------------
-- | A whole number between /0/ and /9/.
data D10
= D0 -- ^ Zero
| D1 -- ^ One
| D2 -- ^ Two
| D3 -- ^ Three
| D4 -- ^ Four
| D5 -- ^ Five
| D6 -- ^ Six
| D7 -- ^ Seven
| D8 -- ^ Eight
| D9 -- ^ Nine
deriving (Bounded, Enum, Eq, Lift, Ord, Show)
-- $bounded
-- ==== Bounded
--
-- >>> minBound :: D10
-- D0
--
-- >>> maxBound :: D10
-- D9
-- $enum
-- ==== Enum
--
-- >>> [ D5 .. ]
-- [D5,D6,D7,D8,D9]
--
-- >>> [ D4 .. D7 ]
-- [D4,D5,D6,D7]
--
-- >>> [ D5, D4 .. ]
-- [D5,D4,D3,D2,D1,D0]
--
-- >>> [ D1, D3 .. ]
-- [D1,D3,D5,D7,D9]
--
-- >>> [ minBound .. maxBound ] :: [D10]
-- [D0,D1,D2,D3,D4,D5,D6,D7,D8,D9]
---------------------------------------------------
-- | Convert a 'D10' to its underlying 'Char' representation.
--
-- >>> d10Char D7
-- '7'
d10Char :: D10 -> Char
d10Char x =
case x of
D0 -> '0'
D1 -> '1'
D2 -> '2'
D3 -> '3'
D4 -> '4'
D5 -> '5'
D6 -> '6'
D7 -> '7'
D8 -> '8'
D9 -> '9'
-- | Convert a 'D10' to a 'String'.
--
-- @'d10Str' x = ['d10Char' x]@
--
-- >>> d10Str D7
-- "7"
d10Str :: D10 -> String
d10Str x = [d10Char x]
-- | Convert a 'D10' to a 'Natural'.
--
-- 'd10Num' is a more general version of this function.
--
-- >>> d10Nat D7
-- 7
d10Nat :: D10 -> Natural
d10Nat = d10Num
-- | Convert a 'D10' to an 'Integer'.
--
-- 'd10Num' is a more general version of this function.
--
-- >>> d10Integer D7
-- 7
d10Integer :: D10 -> Integer
d10Integer = d10Num
-- | Convert a 'D10' to an 'Int'.
--
-- 'd10Num' is a more general version of this function.
--
-- >>> d10Int D7
-- 7
d10Int :: D10 -> Int
d10Int = d10Num
-- | Convert a 'D10' to any kind of number with a 'Num' instance.
--
-- Specialized versions of this function include 'd10Nat',
-- 'd10Integer', and 'd10Int'.
--
-- >>> d10Num D7 :: Integer
-- 7
d10Num :: Num a => D10 -> a
d10Num x =
case x of
D0 -> 0
D1 -> 1
D2 -> 2
D3 -> 3
D4 -> 4
D5 -> 5
D6 -> 6
D7 -> 7
D8 -> 8
D9 -> 9
---------------------------------------------------
-- | The 'D10' which is uniquely congruent modulo 10 to the given 'Natural'.
--
-- 'integralMod10' is a more general version of this function.
--
-- >>> natMod10 56
-- D6
natMod10 :: Natural -> D10
natMod10 = integralMod10
-- | The 'D10' which is uniquely congruent modulo 10 to the given 'Integer'.
--
-- 'integralMod10' is a more general version of this function.
--
-- >>> integerMod10 56
-- D6
--
-- >>> integerMod10 (-56)
-- D4
integerMod10 :: Integer -> D10
integerMod10 = integralMod10
-- | The 'D10' which is uniquely congruent modulo 10 to the given 'Int'.
--
-- 'integralMod10' is a more general version of this function.
--
-- >>> intMod10 56
-- D6
--
-- >>> intMod10 (-56)
-- D4
intMod10 :: Int -> D10
intMod10 = integralMod10
-- | The 'D10' which is uniquely congruent modulo 10 to the given number
-- (whose type must have an instance of the 'Integral' class).
--
-- Specialized versions of this function include 'natMod10',
-- 'integerMod10', and 'intMod10'.
--
-- >>> integralMod10 (56 :: Integer)
-- D6
--
-- >>> integralMod10 ((-56) :: Integer)
-- D4
integralMod10 :: Integral a => a -> D10
integralMod10 x =
case (x `mod` 10) of
0 -> D0
1 -> D1
2 -> D2
3 -> D3
4 -> D4
5 -> D5
6 -> D6
7 -> D7
8 -> D8
9 -> D9
_ -> error "x `mod` 10 is not between 0 and 9"
---------------------------------------------------
-- | Convert a 'Char' to a 'D10' if it is within the range
-- @'0'@ to @'9'@, or produce 'Nothing' otherwise.
--
-- @'Data.D10.Predicate.isD10Char' x = 'Data.Maybe.isJust' ('charD10Maybe' x)@
--
-- 'charD10Fail' is a more general version of this function.
--
-- >>> charD10Maybe '5'
-- Just D5
--
-- >>> charD10Maybe 'a'
-- Nothing
charD10Maybe :: Char -> Maybe D10
charD10Maybe x =
case x of
'0' -> Just D0
'1' -> Just D1
'2' -> Just D2
'3' -> Just D3
'4' -> Just D4
'5' -> Just D5
'6' -> Just D6
'7' -> Just D7
'8' -> Just D8
'9' -> Just D9
_ -> Nothing
-- | Convert a 'String' to a 'D10' if it consists of exactly one
-- character and that character is within the range @'0'@ to @'9'@,
-- or produce 'Nothing' otherwise.
--
-- @'Data.D10.Predicate.isD10Str' x = 'Data.Maybe.isJust' ('strD10Maybe' x)@
--
-- 'strD10Fail' is a more general version of this function.
--
-- >>> strD10Maybe "5"
-- Just D5
--
-- >>> strD10Maybe "a"
-- Nothing
--
-- >>> strD10Maybe "58"
-- Nothing
strD10Maybe :: String -> Maybe D10
strD10Maybe [x] = charD10Maybe x
strD10Maybe _ = Nothing
-- | Convert a 'String' to a list of 'D10' if all of the characters
-- in the string are within the range @'0'@ to @'9'@, or produce
-- 'Nothing' otherwise.
--
-- @'Data.D10.Predicate.isD10Str' x = 'Data.Maybe.isJust' ('strD10ListMaybe' x)@
--
-- 'strD10ListFail' is a more general version of this function.
--
-- >>> strD10ListMaybe "5"
-- Just [D5]
--
-- >>> strD10ListMaybe "a"
-- Nothing
--
-- >>> strD10ListMaybe "58"
-- Just [D5,D8]
strD10ListMaybe :: String -> Maybe [D10]
strD10ListMaybe = traverse charD10Maybe
-- | Convert a 'Natural' to a 'D10' if it is less than 10,
-- or produce 'Nothing' otherwise.
--
-- @'Data.D10.Predicate.isD10Nat' x = 'Data.Maybe.isJust' ('natD10Maybe' x)@
--
-- 'integralD10Maybe', 'natD10Fail', and 'integralD10Fail'
-- are more general versions of this function.
--
-- >>> natD10Maybe 5
-- Just D5
--
-- >>> natD10Maybe 12
-- Nothing
natD10Maybe :: Natural -> Maybe D10
natD10Maybe = integralD10Maybe
-- | Convert an 'Integer' to a 'D10' if it is within the range 0 to 9,
-- or produce 'Nothing' otherwise.
--
-- @'Data.D10.Predicate.isD10Integer' x = 'Data.Maybe.isJust' ('integerD10Maybe' x)@
--
-- 'integralD10Maybe', 'integerD10Fail', and 'integralD10Fail'
-- are more general versions of this function.
--
-- >>> integerD10Maybe 5
-- Just D5
--
-- >>> integerD10Maybe 12
-- Nothing
--
-- >>> integerD10Maybe (-5)
-- Nothing
integerD10Maybe :: Integer -> Maybe D10
integerD10Maybe = integralD10Maybe
-- | Convert an 'Int' to a 'D10' if it is within the range 0 to 9,
-- or produce 'Nothing' otherwise.
--
-- @'Data.D10.Predicate.isD10Int' x = 'Data.Maybe.isJust' ('intD10Maybe' x)@
--
-- 'integralD10Maybe', 'intD10Fail', and 'integralD10Fail'
-- are more general versions of this function.
--
-- >>> intD10Maybe 5
-- Just D5
--
-- >>> intD10Maybe 12
-- Nothing
--
-- >>> intD10Maybe (-5)
-- Nothing
intD10Maybe :: Int -> Maybe D10
intD10Maybe = integralD10Maybe
-- | Construct a 'D10' from any kind of number with an 'Integral'
-- instance, or produce 'Nothing' if the number falls outside the
-- range 0 to 9.
--
-- @'Data.D10.Predicate.isD10Integral' x = 'Data.Maybe.isJust' ('integralD10Maybe' x)@
--
-- Specialized versions of this function include 'natD10Maybe',
-- 'integerD10Maybe', and 'intD10Maybe'.
--
-- 'integralD10Fail' is a more general version of this function.
--
-- >>> integralD10Maybe (5 :: Integer)
-- Just D5
--
-- >>> integralD10Maybe (12 :: Integer)
-- Nothing
--
-- >>> integralD10Maybe ((-5) :: Integer)
-- Nothing
integralD10Maybe :: Integral a => a -> Maybe D10
integralD10Maybe x =
case x of
0 -> Just D0
1 -> Just D1
2 -> Just D2
3 -> Just D3
4 -> Just D4
5 -> Just D5
6 -> Just D6
7 -> Just D7
8 -> Just D8
9 -> Just D9
_ -> Nothing
---------------------------------------------------
-- | Convert a 'Char' to a 'D10' if it is within the range
-- @'0'@ to @'9'@, or 'Left' with an error message otherwise.
--
-- >>> charD10Either '5'
-- Right D5
--
-- >>> charD10Either 'a'
-- Left "d10 must be between 0 and 9"
charD10Either :: Char -> Either String D10
charD10Either x =
case x of
'0' -> Right D0
'1' -> Right D1
'2' -> Right D2
'3' -> Right D3
'4' -> Right D4
'5' -> Right D5
'6' -> Right D6
'7' -> Right D7
'8' -> Right D8
'9' -> Right D9
_ -> Left "d10 must be between 0 and 9"
-- | Convert a 'String' to a 'D10' if it consists of a single
-- character and that character is within the range @'0'@ to
-- @'9'@, or 'Left' with an error message otherwise.
--
-- >>> strD10Either "5"
-- Right D5
--
-- >>> strD10Either "a"
-- Left "d10 must be between 0 and 9"
--
-- >>> strD10Either "58"
-- Left "d10 must be a single character"
strD10Either :: String -> Either String D10
strD10Either [x] = charD10Either x
strD10Either _ = Left "d10 must be a single character"
-- | Convert a 'String' to a 'D10' if all of the characters in
-- the string fall within the range @'0'@ to @'9'@, or 'Left'
-- with an error message otherwise.
--
-- >>> strD10ListEither "5"
-- Right [D5]
--
-- >>> strD10ListEither "a"
-- Left "d10 must be between 0 and 9"
--
-- >>> strD10ListEither "58"
-- Right [D5,D8]
strD10ListEither :: String -> Either String [D10]
strD10ListEither = traverse charD10Either
-- | Convert a 'Natural' to a 'D10' if it is less than 10,
-- or 'Left' with an error message otherwise.
--
-- >>> natD10Either 5
-- Right D5
--
-- >>> natD10Either 12
-- Left "d10 must be less than 10"
natD10Either :: Natural -> Either String D10
natD10Either x =
case x of
0 -> Right D0
1 -> Right D1
2 -> Right D2
3 -> Right D3
4 -> Right D4
5 -> Right D5
6 -> Right D6
7 -> Right D7
8 -> Right D8
9 -> Right D9
_ -> Left "d10 must be less than 10"
-- | Convert an 'Integer' to a 'D10' if it is within the
-- range 0 to 9, or 'Left' with an error message otherwise.
--
-- >>> integerD10Either 5
-- Right D5
--
-- >>> integerD10Either 12
-- Left "d10 must be between 0 and 9"
--
-- >>> integerD10Either (-5)
-- Left "d10 must be between 0 and 9"
integerD10Either :: Integer -> Either String D10
integerD10Either = integralD10Either
-- | Convert an 'Int' to a 'D10' if it is within the range
-- 0 to 9, or 'Left' with an error message otherwise.
--
-- >>> intD10Either 5
-- Right D5
--
-- >>> intD10Either 12
-- Left "d10 must be between 0 and 9"
--
-- >>> intD10Either (-5)
-- Left "d10 must be between 0 and 9"
intD10Either :: Int -> Either String D10
intD10Either = integralD10Either
-- | Convert a number of a type that has an 'Integral' instance
-- to a 'D10' if it falls within the range 0 to 9, or 'Left'
-- with an error message otherwise.
--
-- >>> integralD10Either (5 :: Integer)
-- Right D5
--
-- >>> integralD10Either (12 :: Integer)
-- Left "d10 must be between 0 and 9"
--
-- >>> integralD10Either ((-5) :: Integer)
-- Left "d10 must be between 0 and 9"
integralD10Either :: Integral a => a -> Either String D10
integralD10Either x =
case (integralD10Maybe x) of
Just y -> Right y
Nothing -> Left "d10 must be between 0 and 9"
---------------------------------------------------
-- | Convert a 'Char' to a 'D10' if it is within the range
-- @'0'@ to @'9'@, or 'fail' with an error message otherwise.
--
-- 'charD10Maybe' is a specialized version of this function.
--
-- >>> charD10Fail '5' :: IO D10
-- D5
--
-- >>> charD10Fail 'a' :: IO D10
-- *** Exception: user error (d10 must be between 0 and 9)
charD10Fail :: MonadFail m => Char -> m D10
charD10Fail x =
case x of
'0' -> return D0
'1' -> return D1
'2' -> return D2
'3' -> return D3
'4' -> return D4
'5' -> return D5
'6' -> return D6
'7' -> return D7
'8' -> return D8
'9' -> return D9
_ -> fail "d10 must be between 0 and 9"
-- | Convert a 'String' to a 'D10' if it consists of a single
-- character and that character is within the range @'0'@ to
-- @'9'@, or 'fail' with an error message otherwise.
--
-- 'strD10Maybe' is a specialized version of this function.
--
-- >>> strD10Fail "5" :: IO D10
-- D5
--
-- >>> strD10Fail "a" :: IO D10
-- *** Exception: user error (d10 must be between 0 and 9)
--
-- >>> strD10Fail "58" :: IO D10
-- *** Exception: user error (d10 must be a single character)
strD10Fail :: MonadFail m => String -> m D10
strD10Fail [x] = charD10Fail x
strD10Fail _ = fail "d10 must be a single character"
-- | Convert a 'String' to a 'D10' if all of the characters in
-- the string fall within the range @'0'@ to @'9'@, or 'fail'
-- with an error message otherwise.
--
-- 'strD10ListMaybe' is a specialized version of this function.
--
-- >>> strD10ListFail "5" :: IO [D10]
-- [D5]
--
-- >>> strD10ListFail "a" :: IO [D10]
-- *** Exception: user error (d10 must be between 0 and 9)
--
-- >>> strD10ListFail "58" :: IO [D10]
-- [D5,D8]
strD10ListFail :: MonadFail m => String -> m [D10]
strD10ListFail = traverse charD10Fail
-- | Convert a 'Natural' to a 'D10' if it is less than 10,
-- or 'fail' with an error message otherwise.
--
-- 'natD10Maybe' is a specialized version of this function.
--
-- 'integralD10Fail' is a more general version of this function.
--
-- >>> natD10Fail 5 :: IO D10
-- D5
--
-- >>> natD10Fail 12 :: IO D10
-- *** Exception: user error (d10 must be less than 10)
natD10Fail :: MonadFail m => Natural -> m D10
natD10Fail x =
case x of
0 -> return D0
1 -> return D1
2 -> return D2
3 -> return D3
4 -> return D4
5 -> return D5
6 -> return D6
7 -> return D7
8 -> return D8
9 -> return D9
_ -> fail "d10 must be less than 10"
-- | Convert an 'Integer' to a 'D10' if it is within the
-- range 0 to 9, or 'fail' with an error message otherwise.
--
-- 'integerD10Maybe' is a specialized version of this function.
--
-- 'integralD10Fail' is a more general version of this function.
--
-- >>> integerD10Fail 5 :: IO D10
-- D5
--
-- >>> integerD10Fail 12 :: IO D10
-- *** Exception: user error (d10 must be between 0 and 9)
--
-- >>> integerD10Fail (-5) :: IO D10
-- *** Exception: user error (d10 must be between 0 and 9)
integerD10Fail :: MonadFail m => Integer -> m D10
integerD10Fail = integralD10Fail
-- | Convert an 'Int' to a 'D10' if it is within the range
-- 0 to 9, or 'fail' with an error message otherwise.
--
-- 'intD10Maybe' is a specialized version of this function.
--
-- 'integralD10Fail' is a more general version of this function.
--
-- >>> intD10Fail 5 :: IO D10
-- D5
--
-- >>> intD10Fail 12 :: IO D10
-- *** Exception: user error (d10 must be between 0 and 9)
--
-- >>> intD10Fail (-5) :: IO D10
-- *** Exception: user error (d10 must be between 0 and 9)
intD10Fail :: MonadFail m => Int -> m D10
intD10Fail = integralD10Fail
-- | Convert a number of a type that has an 'Integral' instance
-- to a 'D10' if it falls within the range 0 to 9, or 'fail'
-- with an error message otherwise.
--
-- 'natD10Maybe', 'integerD10Maybe', 'intD10Maybe',
-- 'integralD10Maybe', 'natD10Fail', 'integerD10Fail', and
-- 'intD10Fail' are all specialized versions of this function.
--
-- >>> integralD10Fail (5 :: Integer) :: IO D10
-- D5
--
-- >>> integralD10Fail (12 :: Integer) :: IO D10
-- *** Exception: user error (d10 must be between 0 and 9)
--
-- >>> integralD10Fail ((-5) :: Integer) :: IO D10
-- *** Exception: user error (d10 must be between 0 and 9)
integralD10Fail :: (Integral a, MonadFail m) => a -> m D10
integralD10Fail x =
case (integralD10Maybe x) of
Just y -> return y
Nothing -> fail "d10 must be between 0 and 9"
---------------------------------------------------
-- | Produces an expression of type 'D10' that can be used
-- in a Template Haskell splice.
--
-- >>> $(d10Exp 5)
-- D5
--
-- >>> $(d10Exp 12)
-- ...
-- ... d10 must be between 0 and 9
-- ...
--
-- You may also be interested in 'd10', a quasi-quoter which
-- does something similar.
d10Exp :: Integral a => a -> Q Exp
d10Exp = integralD10Fail >=> (lift :: D10 -> Q Exp)
-- | Produces an expression of type @['D10']@ that can be used
-- in a Template Haskell splice.
--
-- >>> $(d10ListExp "")
-- []
--
-- >>> $(d10ListExp "5")
-- [D5]
--
-- >>> $(d10ListExp "58")
-- [D5,D8]
--
-- >>> $(d10ListExp "a")
-- ...
-- ... d10 must be between 0 and 9
-- ...
--
-- You may also be interested in 'd10list', a quasi-quoter which
-- does something similar.
d10ListExp :: String -> Q Exp
d10ListExp = strD10ListFail >=> (lift :: [D10] -> Q Exp)
---------------------------------------------------
-- | Produces a pattern that can be used in a splice
-- to match a particular 'D10' value.
--
-- >>> :{
-- case (charD10Maybe '5') of
-- Just $(d10Pat D4) -> "A"
-- Just $(d10Pat D5) -> "B"
-- _ -> "C"
-- >>> :}
-- "B"
--
-- You are unlikely to write any code that resembles this example,
-- since you can just write @D4@ instead of @$(d10Pat D4)@.
-- Rather, this function exists to help implement other things
-- related to Template Haskell, such as 'd10ListPat' and 'd10'.
d10Pat :: D10 -> Q Pat
d10Pat x =
case x of
D0 -> [p| D0 |]
D1 -> [p| D1 |]
D2 -> [p| D2 |]
D3 -> [p| D3 |]
D4 -> [p| D4 |]
D5 -> [p| D5 |]
D6 -> [p| D6 |]
D7 -> [p| D7 |]
D8 -> [p| D8 |]
D9 -> [p| D9 |]
-- | Produces a pattern that can be used in a splice
-- to match a particular list of 'D10' values.
--
-- >>> :{
-- case (strD10ListMaybe "56") of
-- Just $(d10ListPat [D4, D2]) -> "A"
-- Just $(d10ListPat [D5, D6]) -> "B"
-- _ -> "C"
-- >>> :}
-- "B"
--
-- You are unlikely to write any code that resembles this example,
-- since you can just write @[D4, D2]@ instead of @$(d10Pat [D4, D2])@.
-- Rather, this function exists to help implement other things
-- related to Template Haskell, such as 'd10list'.
d10ListPat :: [D10] -> Q Pat
d10ListPat xs =
do
pats <- traverse d10Pat xs
return (ListP pats)
---------------------------------------------------
-- | A single base-10 digit.
--
-- This isn't very useful, since you can just write 'D5'
-- instead of '[d10|5|]'. It is included only for completeness,
-- because each of the modules "Data.D10.Char" and "Data.D10.Num"
-- defines a similar quasi-quoter.
--
-- This quasi-quoter, when used as an expression, produces a
-- value of type 'D10'.
--
-- >>> [d10|5|]
-- D5
--
-- >>> [d10|a|]
-- ...
-- ... d10 must be between 0 and 9
-- ...
--
-- >>> [d10|58|]
-- ...
-- ... d10 must be a single character
-- ...
--
-- This quasi-quoter can also be used as a pattern.
--
-- >>> :{
-- case (charD10Maybe '5') of
-- Just [d10|4|] -> "A"
-- Just [d10|5|] -> "B"
-- _ -> "C"
-- >>> :}
-- "B"
--
-- >>> :{
-- case (charD10Maybe '5') of
-- Just [d10|x|] -> "A"
-- Just [d10|5|] -> "B"
-- _ -> "C"
-- >>> :}
-- ...
-- ... d10 must be between 0 and 9
-- ...
d10 :: QuasiQuoter
d10 = QuasiQuoter
{ quoteExp = strD10Fail >=> lift
, quotePat = strD10Fail >=> d10Pat
, quoteType = \_ -> fail "d10 cannot be used in a type context"
, quoteDec = \_ -> fail "d10 cannot be used in a declaration context"
}
-- | A list of base-10 digits.
--
-- This quasi-quoter, when used as an expression, produces a
-- value of type @['D10']@.
--
-- >>> [d10list||]
-- []
--
-- >>> [d10list|5|]
-- [D5]
--
-- >>> [d10list|58|]
-- [D5,D8]
--
-- >>> [d10list|a|]
-- ...
-- ... d10 must be between 0 and 9
-- ...
--
-- This quasi-quoter can also be used as a pattern.
--
-- >>> :{
-- case [d10list|56|] of
-- [d10list|41|] -> "A"
-- [d10list|56|] -> "B"
-- _ -> "C"
-- >>> :}
-- "B"
--
-- >>> :{
-- case [d10list|56|] of
-- [d10list|4x|] -> "A"
-- [d10list|56|] -> "B"
-- _ -> "C"
-- >>> :}
-- ...
-- ... d10 must be between 0 and 9
-- ...
d10list :: QuasiQuoter
d10list = QuasiQuoter
{ quoteExp = strD10ListFail >=> lift
, quotePat = strD10ListFail >=> d10ListPat
, quoteType = \_ -> fail "d10list cannot be used in a type context"
, quoteDec = \_ -> fail "d10list cannot be used in a declaration context"
}
---------------------------------------------------
-- | Addition modulo 10.
--
-- >>> D2 + D3
-- D5
--
-- >>> D6 + D7
-- D3
(+) :: D10 -> D10 -> D10
x + y = intMod10 (d10Int x P.+ d10Int y)
-- | Subtraction modulo 10.
--
-- >>> D7 - D5
-- D2
--
-- >>> D3 - D7
-- D6
(-) :: D10 -> D10 -> D10
x - y = intMod10 (d10Int x P.- d10Int y)
-- | Multiplication modulo 10.
--
-- >>> D2 * D4
-- D8
-- >>> D7 * D8
-- D6
(*) :: D10 -> D10 -> D10
x * y = intMod10 (d10Int x P.* d10Int y)