cabal-install-3.6.0.0: src/Distribution/Client/Setup.hs
{-# LANGUAGE ScopedTypeVariables #-}
{-# LANGUAGE RecordWildCards #-}
{-# LANGUAGE RankNTypes #-}
{-# LANGUAGE DeriveGeneric #-}
{-# LANGUAGE LambdaCase #-}
-----------------------------------------------------------------------------
-- |
-- Module : Distribution.Client.Setup
-- Copyright : (c) David Himmelstrup 2005
-- License : BSD-like
--
-- Maintainer : lemmih@gmail.com
-- Stability : provisional
-- Portability : portable
--
--
-----------------------------------------------------------------------------
module Distribution.Client.Setup
( globalCommand, GlobalFlags(..), defaultGlobalFlags
, RepoContext(..), withRepoContext
, configureCommand, ConfigFlags(..), configureOptions, filterConfigureFlags
, configPackageDB', configCompilerAux'
, configureExCommand, ConfigExFlags(..), defaultConfigExFlags
, buildCommand, BuildFlags(..)
, filterTestFlags
, replCommand, testCommand, benchmarkCommand, testOptions, benchmarkOptions
, configureExOptions, reconfigureCommand
, installCommand, InstallFlags(..), installOptions, defaultInstallFlags
, filterHaddockArgs, filterHaddockFlags, haddockOptions
, defaultSolver, defaultMaxBackjumps
, listCommand, ListFlags(..), listNeedsCompiler
,UpdateFlags(..), defaultUpdateFlags
, infoCommand, InfoFlags(..)
, fetchCommand, FetchFlags(..)
, freezeCommand, FreezeFlags(..)
, genBoundsCommand
, outdatedCommand, OutdatedFlags(..), IgnoreMajorVersionBumps(..)
, getCommand, unpackCommand, GetFlags(..)
, checkCommand
, formatCommand
, uploadCommand, UploadFlags(..), IsCandidate(..)
, reportCommand, ReportFlags(..)
, runCommand
, initCommand, initOptions, IT.InitFlags(..)
, actAsSetupCommand, ActAsSetupFlags(..)
, userConfigCommand, UserConfigFlags(..)
, manpageCommand
, haddockCommand
, cleanCommand
, copyCommand
, registerCommand
, liftOptions
, yesNoOpt
) where
import Prelude ()
import Distribution.Client.Compat.Prelude hiding (get)
import Distribution.Client.Types.Credentials (Username (..), Password (..))
import Distribution.Client.Types.Repo (RemoteRepo(..), LocalRepo (..))
import Distribution.Client.Types.AllowNewer (AllowNewer(..), AllowOlder(..), RelaxDeps(..))
import Distribution.Client.Types.WriteGhcEnvironmentFilesPolicy
import Distribution.Client.BuildReports.Types
( ReportLevel(..) )
import Distribution.Client.Dependency.Types
( PreSolver(..) )
import Distribution.Client.IndexUtils.ActiveRepos
( ActiveRepos )
import Distribution.Client.IndexUtils.IndexState
( TotalIndexState, headTotalIndexState )
import qualified Distribution.Client.Init.Types as IT
( InitFlags(..), PackageType(..), defaultInitFlags )
import Distribution.Client.Targets
( UserConstraint, readUserConstraint )
import Distribution.Utils.NubList
( NubList, toNubList, fromNubList)
import Distribution.Solver.Types.ConstraintSource
import Distribution.Solver.Types.Settings
import Distribution.Simple.Compiler ( Compiler, PackageDB, PackageDBStack )
import Distribution.Simple.Program (ProgramDb, defaultProgramDb)
import Distribution.Simple.Command hiding (boolOpt, boolOpt')
import qualified Distribution.Simple.Command as Command
import Distribution.Simple.Configure
( configCompilerAuxEx, interpretPackageDbFlags, computeEffectiveProfiling )
import qualified Distribution.Simple.Setup as Cabal
import Distribution.Simple.Flag
( Flag(..), toFlag, flagToMaybe, flagToList, maybeToFlag
, flagElim, fromFlagOrDefault
)
import Distribution.Simple.Setup
( ConfigFlags(..), BuildFlags(..), ReplFlags
, TestFlags, BenchmarkFlags
, HaddockFlags(..)
, CleanFlags(..)
, CopyFlags(..), RegisterFlags(..)
, readPackageDbList, showPackageDbList
, BooleanFlag(..), optionVerbosity
, boolOpt, boolOpt', trueArg, falseArg
, optionNumJobs )
import Distribution.Simple.InstallDirs
( PathTemplate, InstallDirs(..)
, toPathTemplate, fromPathTemplate, combinePathTemplate )
import Distribution.Version
( Version, mkVersion )
import Distribution.Package
( PackageName )
import Distribution.Types.GivenComponent
( GivenComponent(..) )
import Distribution.Types.PackageVersionConstraint
( PackageVersionConstraint(..) )
import Distribution.Types.UnqualComponentName
( unqualComponentNameToPackageName )
import Distribution.PackageDescription
( BuildType(..), RepoKind(..), LibraryName(..) )
import Distribution.System ( Platform )
import Distribution.ReadE
( ReadE(..), succeedReadE, parsecToReadE )
import qualified Distribution.Compat.CharParsing as P
import Distribution.Verbosity
( lessVerbose, normal, verboseNoFlags, verboseNoTimestamp )
import Distribution.Simple.Utils
( wrapText )
import Distribution.Client.GlobalFlags
( GlobalFlags(..), defaultGlobalFlags
, RepoContext(..), withRepoContext
)
import Distribution.Client.ManpageFlags (ManpageFlags, defaultManpageFlags, manpageOptions)
import Distribution.FieldGrammar.Newtypes (SpecVersion (..))
import Data.List
( deleteFirstsBy )
import System.FilePath
( (</>) )
globalCommand :: [Command action] -> CommandUI GlobalFlags
globalCommand commands = CommandUI {
commandName = "",
commandSynopsis =
"Command line interface to the Haskell Cabal infrastructure.",
commandUsage = \pname ->
"See http://www.haskell.org/cabal/ for more information.\n"
++ "\n"
++ "Usage: " ++ pname ++ " [GLOBAL FLAGS] [COMMAND [FLAGS]]\n",
commandDescription = Just $ \pname ->
let
commands' = commands ++ [commandAddAction helpCommandUI undefined]
cmdDescs = getNormalCommandDescriptions commands'
-- if new commands are added, we want them to appear even if they
-- are not included in the custom listing below. Thus, we calculate
-- the `otherCmds` list and append it under the `other` category.
-- Alternatively, a new testcase could be added that ensures that
-- the set of commands listed here is equal to the set of commands
-- that are actually available.
otherCmds = deleteFirstsBy (==) (map fst cmdDescs)
[ "help"
, "update"
, "install"
, "fetch"
, "list"
, "info"
, "user-config"
, "get"
, "init"
, "configure"
, "build"
, "clean"
, "run"
, "repl"
, "test"
, "bench"
, "check"
, "sdist"
, "upload"
, "report"
, "freeze"
, "gen-bounds"
, "outdated"
, "haddock"
, "hscolour"
, "exec"
, "new-build"
, "new-configure"
, "new-repl"
, "new-freeze"
, "new-run"
, "new-test"
, "new-bench"
, "new-haddock"
, "new-exec"
, "new-update"
, "new-install"
, "new-clean"
, "new-sdist"
, "list-bin"
-- v1 commands, stateful style
, "v1-build"
, "v1-configure"
, "v1-repl"
, "v1-freeze"
, "v1-run"
, "v1-test"
, "v1-bench"
, "v1-haddock"
, "v1-exec"
, "v1-update"
, "v1-install"
, "v1-clean"
, "v1-sdist"
, "v1-doctest"
, "v1-copy"
, "v1-register"
, "v1-reconfigure"
-- v2 commands, nix-style
, "v2-build"
, "v2-configure"
, "v2-repl"
, "v2-freeze"
, "v2-run"
, "v2-test"
, "v2-bench"
, "v2-haddock"
, "v2-exec"
, "v2-update"
, "v2-install"
, "v2-clean"
, "v2-sdist"
]
maxlen = maximum $ [length name | (name, _) <- cmdDescs]
align str = str ++ replicate (maxlen - length str) ' '
startGroup n = " ["++n++"]"
par = ""
addCmd n = case lookup n cmdDescs of
Nothing -> ""
Just d -> " " ++ align n ++ " " ++ d
in
"Commands:\n"
++ unlines (
[ startGroup "global"
, addCmd "update"
, addCmd "install"
, par
, addCmd "help"
, addCmd "info"
, addCmd "list"
, addCmd "fetch"
, addCmd "user-config"
, par
, startGroup "package"
, addCmd "get"
, addCmd "init"
, par
, addCmd "configure"
, addCmd "build"
, addCmd "clean"
, par
, addCmd "run"
, addCmd "repl"
, addCmd "test"
, addCmd "bench"
, par
, addCmd "check"
, addCmd "sdist"
, addCmd "upload"
, addCmd "report"
, par
, addCmd "freeze"
, addCmd "gen-bounds"
, addCmd "outdated"
, addCmd "haddock"
, addCmd "hscolour"
, addCmd "exec"
, addCmd "list-bin"
, par
, startGroup "new-style projects (forwards-compatible aliases)"
, addCmd "v2-build"
, addCmd "v2-configure"
, addCmd "v2-repl"
, addCmd "v2-run"
, addCmd "v2-test"
, addCmd "v2-bench"
, addCmd "v2-freeze"
, addCmd "v2-haddock"
, addCmd "v2-exec"
, addCmd "v2-update"
, addCmd "v2-install"
, addCmd "v2-clean"
, addCmd "v2-sdist"
, par
, startGroup "legacy command aliases"
, addCmd "v1-build"
, addCmd "v1-configure"
, addCmd "v1-repl"
, addCmd "v1-run"
, addCmd "v1-test"
, addCmd "v1-bench"
, addCmd "v1-freeze"
, addCmd "v1-haddock"
, addCmd "v1-exec"
, addCmd "v1-update"
, addCmd "v1-install"
, addCmd "v1-clean"
, addCmd "v1-sdist"
, addCmd "v1-doctest"
, addCmd "v1-copy"
, addCmd "v1-register"
, addCmd "v1-reconfigure"
] ++ if null otherCmds then [] else par
:startGroup "other"
:[addCmd n | n <- otherCmds])
++ "\n"
++ "For more information about a command use:\n"
++ " " ++ pname ++ " COMMAND --help\n"
++ "or " ++ pname ++ " help COMMAND\n"
++ "\n"
++ "To install Cabal packages from hackage use:\n"
++ " " ++ pname ++ " install foo [--dry-run]\n"
++ "\n"
++ "Occasionally you need to update the list of available packages:\n"
++ " " ++ pname ++ " update\n",
commandNotes = Nothing,
commandDefaultFlags = mempty,
commandOptions = args
}
where
args :: ShowOrParseArgs -> [OptionField GlobalFlags]
args ShowArgs = argsShown
args ParseArgs = argsShown ++ argsNotShown
-- arguments we want to show in the help
argsShown :: [OptionField GlobalFlags]
argsShown = [
option ['V'] ["version"]
"Print version information"
globalVersion (\v flags -> flags { globalVersion = v })
trueArg
,option [] ["numeric-version"]
"Print just the version number"
globalNumericVersion (\v flags -> flags { globalNumericVersion = v })
trueArg
,option [] ["config-file"]
"Set an alternate location for the config file"
globalConfigFile (\v flags -> flags { globalConfigFile = v })
(reqArgFlag "FILE")
,option [] ["default-user-config"]
"Set a location for a cabal.config file for projects without their own cabal.config freeze file."
globalConstraintsFile (\v flags -> flags {globalConstraintsFile = v})
(reqArgFlag "FILE")
,option [] ["ignore-expiry"]
"Ignore expiry dates on signed metadata (use only in exceptional circumstances)"
globalIgnoreExpiry (\v flags -> flags { globalIgnoreExpiry = v })
trueArg
,option [] ["http-transport"]
"Set a transport for http(s) requests. Accepts 'curl', 'wget', 'powershell', and 'plain-http'. (default: 'curl')"
globalHttpTransport (\v flags -> flags { globalHttpTransport = v })
(reqArgFlag "HttpTransport")
,option [] ["nix"]
"Nix integration: run commands through nix-shell if a 'shell.nix' file exists"
globalNix (\v flags -> flags { globalNix = v })
(boolOpt [] [])
]
-- arguments we don't want shown in the help
argsNotShown :: [OptionField GlobalFlags]
argsNotShown = [
option [] ["remote-repo"]
"The name and url for a remote repository"
globalRemoteRepos (\v flags -> flags { globalRemoteRepos = v })
(reqArg' "NAME:URL" (toNubList . maybeToList . readRemoteRepo) (map showRemoteRepo . fromNubList))
,option [] ["local-no-index-repo"]
"The name and a path for a local no-index repository"
globalLocalNoIndexRepos (\v flags -> flags { globalLocalNoIndexRepos = v })
(reqArg' "NAME:PATH" (toNubList . maybeToList . readLocalRepo) (map showLocalRepo . fromNubList))
,option [] ["remote-repo-cache"]
"The location where downloads from all remote repos are cached"
globalCacheDir (\v flags -> flags { globalCacheDir = v })
(reqArgFlag "DIR")
,option [] ["logs-dir", "logsdir"]
"The location to put log files"
globalLogsDir (\v flags -> flags { globalLogsDir = v })
(reqArgFlag "DIR")
,option [] ["world-file"]
"The location of the world file"
globalWorldFile (\v flags -> flags { globalWorldFile = v })
(reqArgFlag "FILE")
,option [] ["store-dir", "storedir"]
"The location of the nix-local-build store"
globalStoreDir (\v flags -> flags { globalStoreDir = v })
(reqArgFlag "DIR")
, option [] ["active-repositories"]
"The active package repositories"
globalActiveRepos (\v flags -> flags { globalActiveRepos = v })
(reqArg "REPOS" (parsecToReadE (\err -> "Error parsing active-repositories: " ++ err)
(toFlag `fmap` parsec))
(map prettyShow . flagToList))
]
-- ------------------------------------------------------------
-- * Config flags
-- ------------------------------------------------------------
configureCommand :: CommandUI ConfigFlags
configureCommand = c
{ commandName = "configure"
, commandDefaultFlags = mempty
, commandDescription = Just $ \_ -> wrapText $
"Configure how the package is built by setting "
++ "package (and other) flags.\n"
++ "\n"
++ "The configuration affects several other commands, "
++ "including v1-build, v1-test, v1-bench, v1-run, v1-repl.\n"
, commandUsage = \pname ->
"Usage: " ++ pname ++ " v1-configure [FLAGS]\n"
, commandNotes = Just $ \pname ->
(Cabal.programFlagsDescription defaultProgramDb ++ "\n")
++ "Examples:\n"
++ " " ++ pname ++ " v1-configure\n"
++ " Configure with defaults;\n"
++ " " ++ pname ++ " v1-configure --enable-tests -fcustomflag\n"
++ " Configure building package including tests,\n"
++ " with some package-specific flag.\n"
}
where
c = Cabal.configureCommand defaultProgramDb
configureOptions :: ShowOrParseArgs -> [OptionField ConfigFlags]
configureOptions = commandOptions configureCommand
-- | Given some 'ConfigFlags' for the version of Cabal that
-- cabal-install was built with, and a target older 'Version' of
-- Cabal that we want to pass these flags to, convert the
-- flags into a form that will be accepted by the older
-- Setup script. Generally speaking, this just means filtering
-- out flags that the old Cabal library doesn't understand, but
-- in some cases it may also mean "emulating" a feature using
-- some more legacy flags.
filterConfigureFlags :: ConfigFlags -> Version -> ConfigFlags
filterConfigureFlags flags cabalLibVersion
-- NB: we expect the latest version to be the most common case,
-- so test it first.
| cabalLibVersion >= mkVersion [2,5,0] = flags_latest
-- The naming convention is that flags_version gives flags with
-- all flags *introduced* in version eliminated.
-- It is NOT the latest version of Cabal library that
-- these flags work for; version of introduction is a more
-- natural metric.
| cabalLibVersion < mkVersion [1,3,10] = flags_1_3_10
| cabalLibVersion < mkVersion [1,10,0] = flags_1_10_0
| cabalLibVersion < mkVersion [1,12,0] = flags_1_12_0
| cabalLibVersion < mkVersion [1,14,0] = flags_1_14_0
| cabalLibVersion < mkVersion [1,18,0] = flags_1_18_0
| cabalLibVersion < mkVersion [1,19,1] = flags_1_19_1
| cabalLibVersion < mkVersion [1,19,2] = flags_1_19_2
| cabalLibVersion < mkVersion [1,21,1] = flags_1_21_1
| cabalLibVersion < mkVersion [1,22,0] = flags_1_22_0
| cabalLibVersion < mkVersion [1,22,1] = flags_1_22_1
| cabalLibVersion < mkVersion [1,23,0] = flags_1_23_0
| cabalLibVersion < mkVersion [1,25,0] = flags_1_25_0
| cabalLibVersion < mkVersion [2,1,0] = flags_2_1_0
| cabalLibVersion < mkVersion [2,5,0] = flags_2_5_0
| otherwise = error "the impossible just happened" -- see first guard
where
flags_latest = flags {
-- Cabal >= 1.19.1 uses '--dependency' and does not need '--constraint'.
-- Note: this is not in the wrong place. configConstraints gets
-- repopulated in flags_1_19_1 but it needs to be set to empty for
-- newer versions first.
configConstraints = []
}
flags_2_5_0 = flags_latest {
-- Cabal < 2.5 does not understand --dependency=pkg:component=cid
-- (public sublibraries), so we convert it to the legacy
-- --dependency=pkg_or_internal_compoent=cid
configDependencies =
let convertToLegacyInternalDep (GivenComponent _ (LSubLibName cn) cid) =
Just $ GivenComponent
(unqualComponentNameToPackageName cn)
LMainLibName
cid
convertToLegacyInternalDep (GivenComponent pn LMainLibName cid) =
Just $ GivenComponent pn LMainLibName cid
in catMaybes $ convertToLegacyInternalDep <$> configDependencies flags
-- Cabal < 2.5 doesn't know about '--allow-depending-on-private-libs'.
, configAllowDependingOnPrivateLibs = NoFlag
-- Cabal < 2.5 doesn't know about '--enable/disable-executable-static'.
, configFullyStaticExe = NoFlag
}
flags_2_1_0 = flags_2_5_0 {
-- Cabal < 2.1 doesn't know about -v +timestamp modifier
configVerbosity = fmap verboseNoTimestamp (configVerbosity flags_latest)
-- Cabal < 2.1 doesn't know about --<enable|disable>-static
, configStaticLib = NoFlag
, configSplitSections = NoFlag
}
flags_1_25_0 = flags_2_1_0 {
-- Cabal < 1.25.0 doesn't know about --dynlibdir.
configInstallDirs = configInstallDirs_1_25_0,
-- Cabal < 1.25 doesn't have extended verbosity syntax
configVerbosity = fmap verboseNoFlags (configVerbosity flags_2_1_0),
-- Cabal < 1.25 doesn't support --deterministic
configDeterministic = mempty
}
configInstallDirs_1_25_0 = let dirs = configInstallDirs flags in
dirs { dynlibdir = NoFlag
, libexecsubdir = NoFlag
, libexecdir = maybeToFlag $
combinePathTemplate <$> flagToMaybe (libexecdir dirs)
<*> flagToMaybe (libexecsubdir dirs)
}
-- Cabal < 1.23 doesn't know about '--profiling-detail'.
-- Cabal < 1.23 has a hacked up version of 'enable-profiling'
-- which we shouldn't use.
(tryLibProfiling, tryExeProfiling) = computeEffectiveProfiling flags
flags_1_23_0 = flags_1_25_0 { configProfDetail = NoFlag
, configProfLibDetail = NoFlag
, configIPID = NoFlag
, configProf = NoFlag
, configProfExe = Flag tryExeProfiling
, configProfLib = Flag tryLibProfiling
}
-- Cabal == 1.22.0.* had a discontinuity (see #5946 or e9a8d48a3adce34d)
-- due to temporary amnesia of the --*-executable-profiling flags
flags_1_22_1 = flags_1_23_0 { configDebugInfo = NoFlag
, configProfExe = NoFlag
}
-- Cabal < 1.22 doesn't know about '--disable-debug-info'.
flags_1_22_0 = flags_1_23_0 { configDebugInfo = NoFlag }
-- Cabal < 1.21.1 doesn't know about 'disable-relocatable'
-- Cabal < 1.21.1 doesn't know about 'enable-profiling'
-- (but we already dealt with it in flags_1_23_0)
flags_1_21_1 =
flags_1_22_0 { configRelocatable = NoFlag
, configCoverage = NoFlag
, configLibCoverage = configCoverage flags
}
-- Cabal < 1.19.2 doesn't know about '--exact-configuration' and
-- '--enable-library-stripping'.
flags_1_19_2 = flags_1_21_1 { configExactConfiguration = NoFlag
, configStripLibs = NoFlag }
-- Cabal < 1.19.1 uses '--constraint' instead of '--dependency'.
flags_1_19_1 = flags_1_19_2 { configDependencies = []
, configConstraints = configConstraints flags }
-- Cabal < 1.18.0 doesn't know about --extra-prog-path and --sysconfdir.
flags_1_18_0 = flags_1_19_1 { configProgramPathExtra = toNubList []
, configInstallDirs = configInstallDirs_1_18_0}
configInstallDirs_1_18_0 = (configInstallDirs flags_1_19_1) { sysconfdir = NoFlag }
-- Cabal < 1.14.0 doesn't know about '--disable-benchmarks'.
flags_1_14_0 = flags_1_18_0 { configBenchmarks = NoFlag }
-- Cabal < 1.12.0 doesn't know about '--enable/disable-executable-dynamic'
-- and '--enable/disable-library-coverage'.
flags_1_12_0 = flags_1_14_0 { configLibCoverage = NoFlag
, configDynExe = NoFlag }
-- Cabal < 1.10.0 doesn't know about '--disable-tests'.
flags_1_10_0 = flags_1_12_0 { configTests = NoFlag }
-- Cabal < 1.3.10 does not grok the '--constraints' flag.
flags_1_3_10 = flags_1_10_0 { configConstraints = [] }
-- | Get the package database settings from 'ConfigFlags', accounting for
-- @--package-db@ and @--user@ flags.
configPackageDB' :: ConfigFlags -> PackageDBStack
configPackageDB' cfg =
interpretPackageDbFlags userInstall (configPackageDBs cfg)
where
userInstall = Cabal.fromFlagOrDefault True (configUserInstall cfg)
-- | Configure the compiler, but reduce verbosity during this step.
configCompilerAux' :: ConfigFlags -> IO (Compiler, Platform, ProgramDb)
configCompilerAux' configFlags =
configCompilerAuxEx configFlags
--FIXME: make configCompilerAux use a sensible verbosity
{ configVerbosity = fmap lessVerbose (configVerbosity configFlags) }
-- ------------------------------------------------------------
-- * Config extra flags
-- ------------------------------------------------------------
-- | cabal configure takes some extra flags beyond runghc Setup configure
--
data ConfigExFlags = ConfigExFlags {
configCabalVersion :: Flag Version,
configExConstraints :: [(UserConstraint, ConstraintSource)],
configPreferences :: [PackageVersionConstraint],
configSolver :: Flag PreSolver,
configAllowNewer :: Maybe AllowNewer,
configAllowOlder :: Maybe AllowOlder,
configWriteGhcEnvironmentFilesPolicy
:: Flag WriteGhcEnvironmentFilesPolicy
}
deriving (Eq, Show, Generic)
defaultConfigExFlags :: ConfigExFlags
defaultConfigExFlags = mempty { configSolver = Flag defaultSolver }
configureExCommand :: CommandUI (ConfigFlags, ConfigExFlags)
configureExCommand = configureCommand {
commandDefaultFlags = (mempty, defaultConfigExFlags),
commandOptions = \showOrParseArgs ->
liftOptions fst setFst
(filter ((`notElem` ["constraint", "dependency", "exact-configuration"])
. optionName) $ configureOptions showOrParseArgs)
++ liftOptions snd setSnd
(configureExOptions showOrParseArgs ConstraintSourceCommandlineFlag)
}
where
setFst a (_,b) = (a,b)
setSnd b (a,_) = (a,b)
configureExOptions :: ShowOrParseArgs
-> ConstraintSource
-> [OptionField ConfigExFlags]
configureExOptions _showOrParseArgs src =
[ option [] ["cabal-lib-version"]
("Select which version of the Cabal lib to use to build packages "
++ "(useful for testing).")
configCabalVersion (\v flags -> flags { configCabalVersion = v })
(reqArg "VERSION" (parsecToReadE ("Cannot parse cabal lib version: "++)
(fmap toFlag parsec))
(map prettyShow. flagToList))
, option [] ["constraint"]
"Specify constraints on a package (version, installed/source, flags)"
configExConstraints (\v flags -> flags { configExConstraints = v })
(reqArg "CONSTRAINT"
((\x -> [(x, src)]) `fmap` ReadE readUserConstraint)
(map $ prettyShow . fst))
, option [] ["preference"]
"Specify preferences (soft constraints) on the version of a package"
configPreferences (\v flags -> flags { configPreferences = v })
(reqArg "CONSTRAINT"
(parsecToReadE (const "dependency expected")
(fmap (\x -> [x]) parsec))
(map prettyShow))
, optionSolver configSolver (\v flags -> flags { configSolver = v })
, option [] ["allow-older"]
("Ignore lower bounds in all dependencies or DEPS")
(fmap unAllowOlder . configAllowOlder)
(\v flags -> flags { configAllowOlder = fmap AllowOlder v})
(optArg "DEPS"
(parsecToReadE ("Cannot parse the list of packages: " ++) relaxDepsParser)
(Just RelaxDepsAll) relaxDepsPrinter)
, option [] ["allow-newer"]
("Ignore upper bounds in all dependencies or DEPS")
(fmap unAllowNewer . configAllowNewer)
(\v flags -> flags { configAllowNewer = fmap AllowNewer v})
(optArg "DEPS"
(parsecToReadE ("Cannot parse the list of packages: " ++) relaxDepsParser)
(Just RelaxDepsAll) relaxDepsPrinter)
, option [] ["write-ghc-environment-files"]
("Whether to create a .ghc.environment file after a successful build"
++ " (v2-build only)")
configWriteGhcEnvironmentFilesPolicy
(\v flags -> flags { configWriteGhcEnvironmentFilesPolicy = v})
(reqArg "always|never|ghc8.4.4+"
writeGhcEnvironmentFilesPolicyParser
writeGhcEnvironmentFilesPolicyPrinter)
]
writeGhcEnvironmentFilesPolicyParser :: ReadE (Flag WriteGhcEnvironmentFilesPolicy)
writeGhcEnvironmentFilesPolicyParser = ReadE $ \case
"always" -> Right $ Flag AlwaysWriteGhcEnvironmentFiles
"never" -> Right $ Flag NeverWriteGhcEnvironmentFiles
"ghc8.4.4+" -> Right $ Flag WriteGhcEnvironmentFilesOnlyForGhc844AndNewer
policy -> Left $ "Cannot parse the GHC environment file write policy '"
<> policy <> "'"
writeGhcEnvironmentFilesPolicyPrinter
:: Flag WriteGhcEnvironmentFilesPolicy -> [String]
writeGhcEnvironmentFilesPolicyPrinter = \case
(Flag AlwaysWriteGhcEnvironmentFiles) -> ["always"]
(Flag NeverWriteGhcEnvironmentFiles) -> ["never"]
(Flag WriteGhcEnvironmentFilesOnlyForGhc844AndNewer) -> ["ghc8.4.4+"]
NoFlag -> []
relaxDepsParser :: CabalParsing m => m (Maybe RelaxDeps)
relaxDepsParser =
(Just . RelaxDepsSome . toList) `fmap` P.sepByNonEmpty parsec (P.char ',')
relaxDepsPrinter :: (Maybe RelaxDeps) -> [Maybe String]
relaxDepsPrinter Nothing = []
relaxDepsPrinter (Just RelaxDepsAll) = [Nothing]
relaxDepsPrinter (Just (RelaxDepsSome pkgs)) = map (Just . prettyShow) $ pkgs
instance Monoid ConfigExFlags where
mempty = gmempty
mappend = (<>)
instance Semigroup ConfigExFlags where
(<>) = gmappend
reconfigureCommand :: CommandUI (ConfigFlags, ConfigExFlags)
reconfigureCommand
= configureExCommand
{ commandName = "reconfigure"
, commandSynopsis = "Reconfigure the package if necessary."
, commandDescription = Just $ \pname -> wrapText $
"Run `configure` with the most recently used flags, or append FLAGS "
++ "to the most recently used configuration. "
++ "Accepts the same flags as `" ++ pname ++ " v1-configure'. "
++ "If the package has never been configured, the default flags are "
++ "used."
, commandNotes = Just $ \pname ->
"Examples:\n"
++ " " ++ pname ++ " v1-reconfigure\n"
++ " Configure with the most recently used flags.\n"
++ " " ++ pname ++ " v1-reconfigure -w PATH\n"
++ " Reconfigure with the most recently used flags,\n"
++ " but use the compiler at PATH.\n\n"
, commandUsage = usageAlternatives "v1-reconfigure" [ "[FLAGS]" ]
, commandDefaultFlags = mempty
}
-- ------------------------------------------------------------
-- * Build flags
-- ------------------------------------------------------------
buildCommand :: CommandUI BuildFlags
buildCommand = parent {
commandName = "build",
commandDescription = Just $ \_ -> wrapText $
"Components encompass executables, tests, and benchmarks.\n"
++ "\n"
++ "Affected by configuration options, see `v1-configure`.\n",
commandDefaultFlags = commandDefaultFlags parent,
commandUsage = usageAlternatives "v1-build" $
[ "[FLAGS]", "COMPONENTS [FLAGS]" ],
commandOptions = commandOptions parent
, commandNotes = Just $ \pname ->
"Examples:\n"
++ " " ++ pname ++ " v1-build "
++ " All the components in the package\n"
++ " " ++ pname ++ " v1-build foo "
++ " A component (i.e. lib, exe, test suite)\n\n"
++ Cabal.programFlagsDescription defaultProgramDb
}
where
parent = Cabal.buildCommand defaultProgramDb
-- ------------------------------------------------------------
-- * Test flags
-- ------------------------------------------------------------
-- | Given some 'TestFlags' for the version of Cabal that
-- cabal-install was built with, and a target older 'Version' of
-- Cabal that we want to pass these flags to, convert the
-- flags into a form that will be accepted by the older
-- Setup script. Generally speaking, this just means filtering
-- out flags that the old Cabal library doesn't understand, but
-- in some cases it may also mean "emulating" a feature using
-- some more legacy flags.
filterTestFlags :: TestFlags -> Version -> TestFlags
filterTestFlags flags cabalLibVersion
-- NB: we expect the latest version to be the most common case,
-- so test it first.
| cabalLibVersion >= mkVersion [3,0,0] = flags_latest
-- The naming convention is that flags_version gives flags with
-- all flags *introduced* in version eliminated.
-- It is NOT the latest version of Cabal library that
-- these flags work for; version of introduction is a more
-- natural metric.
| cabalLibVersion < mkVersion [3,0,0] = flags_3_0_0
| otherwise = error "the impossible just happened" -- see first guard
where
flags_latest = flags
flags_3_0_0 = flags_latest {
-- Cabal < 3.0 doesn't know about --test-wrapper
Cabal.testWrapper = NoFlag
}
-- ------------------------------------------------------------
-- * Repl command
-- ------------------------------------------------------------
replCommand :: CommandUI ReplFlags
replCommand = parent {
commandName = "repl",
commandDescription = Just $ \pname -> wrapText $
"If the current directory contains no package, ignores COMPONENT "
++ "parameters and opens an interactive interpreter session;\n"
++ "\n"
++ "Otherwise, (re)configures with the given or default flags, and "
++ "loads the interpreter with the relevant modules. For executables, "
++ "tests and benchmarks, loads the main module (and its "
++ "dependencies); for libraries all exposed/other modules.\n"
++ "\n"
++ "The default component is the library itself, or the executable "
++ "if that is the only component.\n"
++ "\n"
++ "Support for loading specific modules is planned but not "
++ "implemented yet. For certain scenarios, `" ++ pname
++ " v1-exec -- ghci :l Foo` may be used instead. Note that `v1-exec` will "
++ "not (re)configure and you will have to specify the location of "
++ "other modules, if required.\n",
commandUsage = \pname -> "Usage: " ++ pname ++ " v1-repl [COMPONENT] [FLAGS]\n",
commandDefaultFlags = commandDefaultFlags parent,
commandOptions = commandOptions parent,
commandNotes = Just $ \pname ->
"Examples:\n"
++ " " ++ pname ++ " v1-repl "
++ " The first component in the package\n"
++ " " ++ pname ++ " v1-repl foo "
++ " A named component (i.e. lib, exe, test suite)\n"
++ " " ++ pname ++ " v1-repl --ghc-options=\"-lstdc++\""
++ " Specifying flags for interpreter\n"
}
where
parent = Cabal.replCommand defaultProgramDb
-- ------------------------------------------------------------
-- * Test command
-- ------------------------------------------------------------
testCommand :: CommandUI (BuildFlags, TestFlags)
testCommand = parent {
commandName = "test",
commandDescription = Just $ \pname -> wrapText $
"If necessary (re)configures with `--enable-tests` flag and builds"
++ " the test suite.\n"
++ "\n"
++ "Remember that the tests' dependencies must be installed if there"
++ " are additional ones; e.g. with `" ++ pname
++ " v1-install --only-dependencies --enable-tests`.\n"
++ "\n"
++ "By defining UserHooks in a custom Setup.hs, the package can"
++ " define actions to be executed before and after running tests.\n",
commandUsage = usageAlternatives "v1-test"
[ "[FLAGS]", "TESTCOMPONENTS [FLAGS]" ],
commandDefaultFlags = (Cabal.defaultBuildFlags, commandDefaultFlags parent),
commandOptions =
\showOrParseArgs -> liftOptions get1 set1
(Cabal.buildOptions progDb showOrParseArgs)
++
liftOptions get2 set2
(commandOptions parent showOrParseArgs)
}
where
get1 (a,_) = a; set1 a (_,b) = (a,b)
get2 (_,b) = b; set2 b (a,_) = (a,b)
parent = Cabal.testCommand
progDb = defaultProgramDb
-- ------------------------------------------------------------
-- * Bench command
-- ------------------------------------------------------------
benchmarkCommand :: CommandUI (BuildFlags, BenchmarkFlags)
benchmarkCommand = parent {
commandName = "bench",
commandUsage = usageAlternatives "v1-bench"
[ "[FLAGS]", "BENCHCOMPONENTS [FLAGS]" ],
commandDescription = Just $ \pname -> wrapText $
"If necessary (re)configures with `--enable-benchmarks` flag and"
++ " builds the benchmarks.\n"
++ "\n"
++ "Remember that the benchmarks' dependencies must be installed if"
++ " there are additional ones; e.g. with `" ++ pname
++ " v1-install --only-dependencies --enable-benchmarks`.\n"
++ "\n"
++ "By defining UserHooks in a custom Setup.hs, the package can"
++ " define actions to be executed before and after running"
++ " benchmarks.\n",
commandDefaultFlags = (Cabal.defaultBuildFlags, commandDefaultFlags parent),
commandOptions =
\showOrParseArgs -> liftOptions get1 set1
(Cabal.buildOptions progDb showOrParseArgs)
++
liftOptions get2 set2
(commandOptions parent showOrParseArgs)
}
where
get1 (a,_) = a; set1 a (_,b) = (a,b)
get2 (_,b) = b; set2 b (a,_) = (a,b)
parent = Cabal.benchmarkCommand
progDb = defaultProgramDb
-- ------------------------------------------------------------
-- * Fetch command
-- ------------------------------------------------------------
data FetchFlags = FetchFlags {
-- fetchOutput :: Flag FilePath,
fetchDeps :: Flag Bool,
fetchDryRun :: Flag Bool,
fetchSolver :: Flag PreSolver,
fetchMaxBackjumps :: Flag Int,
fetchReorderGoals :: Flag ReorderGoals,
fetchCountConflicts :: Flag CountConflicts,
fetchFineGrainedConflicts :: Flag FineGrainedConflicts,
fetchMinimizeConflictSet :: Flag MinimizeConflictSet,
fetchIndependentGoals :: Flag IndependentGoals,
fetchShadowPkgs :: Flag ShadowPkgs,
fetchStrongFlags :: Flag StrongFlags,
fetchAllowBootLibInstalls :: Flag AllowBootLibInstalls,
fetchOnlyConstrained :: Flag OnlyConstrained,
fetchTests :: Flag Bool,
fetchBenchmarks :: Flag Bool,
fetchVerbosity :: Flag Verbosity
}
defaultFetchFlags :: FetchFlags
defaultFetchFlags = FetchFlags {
-- fetchOutput = mempty,
fetchDeps = toFlag True,
fetchDryRun = toFlag False,
fetchSolver = Flag defaultSolver,
fetchMaxBackjumps = Flag defaultMaxBackjumps,
fetchReorderGoals = Flag (ReorderGoals False),
fetchCountConflicts = Flag (CountConflicts True),
fetchFineGrainedConflicts = Flag (FineGrainedConflicts True),
fetchMinimizeConflictSet = Flag (MinimizeConflictSet False),
fetchIndependentGoals = Flag (IndependentGoals False),
fetchShadowPkgs = Flag (ShadowPkgs False),
fetchStrongFlags = Flag (StrongFlags False),
fetchAllowBootLibInstalls = Flag (AllowBootLibInstalls False),
fetchOnlyConstrained = Flag OnlyConstrainedNone,
fetchTests = toFlag False,
fetchBenchmarks = toFlag False,
fetchVerbosity = toFlag normal
}
fetchCommand :: CommandUI FetchFlags
fetchCommand = CommandUI {
commandName = "fetch",
commandSynopsis = "Downloads packages for later installation.",
commandUsage = usageAlternatives "fetch" [ "[FLAGS] PACKAGES"
],
commandDescription = Just $ \_ ->
"Note that it currently is not possible to fetch the dependencies for a\n"
++ "package in the current directory.\n",
commandNotes = Nothing,
commandDefaultFlags = defaultFetchFlags,
commandOptions = \ showOrParseArgs -> [
optionVerbosity fetchVerbosity (\v flags -> flags { fetchVerbosity = v })
-- , option "o" ["output"]
-- "Put the package(s) somewhere specific rather than the usual cache."
-- fetchOutput (\v flags -> flags { fetchOutput = v })
-- (reqArgFlag "PATH")
, option [] ["dependencies", "deps"]
"Resolve and fetch dependencies (default)"
fetchDeps (\v flags -> flags { fetchDeps = v })
trueArg
, option [] ["no-dependencies", "no-deps"]
"Ignore dependencies"
fetchDeps (\v flags -> flags { fetchDeps = v })
falseArg
, option [] ["dry-run"]
"Do not install anything, only print what would be installed."
fetchDryRun (\v flags -> flags { fetchDryRun = v })
trueArg
, option "" ["tests"]
"dependency checking and compilation for test suites listed in the package description file."
fetchTests (\v flags -> flags { fetchTests = v })
(boolOpt [] [])
, option "" ["benchmarks"]
"dependency checking and compilation for benchmarks listed in the package description file."
fetchBenchmarks (\v flags -> flags { fetchBenchmarks = v })
(boolOpt [] [])
] ++
optionSolver fetchSolver (\v flags -> flags { fetchSolver = v }) :
optionSolverFlags showOrParseArgs
fetchMaxBackjumps (\v flags -> flags { fetchMaxBackjumps = v })
fetchReorderGoals (\v flags -> flags { fetchReorderGoals = v })
fetchCountConflicts (\v flags -> flags { fetchCountConflicts = v })
fetchFineGrainedConflicts (\v flags -> flags { fetchFineGrainedConflicts = v })
fetchMinimizeConflictSet (\v flags -> flags { fetchMinimizeConflictSet = v })
fetchIndependentGoals (\v flags -> flags { fetchIndependentGoals = v })
fetchShadowPkgs (\v flags -> flags { fetchShadowPkgs = v })
fetchStrongFlags (\v flags -> flags { fetchStrongFlags = v })
fetchAllowBootLibInstalls (\v flags -> flags { fetchAllowBootLibInstalls = v })
fetchOnlyConstrained (\v flags -> flags { fetchOnlyConstrained = v })
}
-- ------------------------------------------------------------
-- * Freeze command
-- ------------------------------------------------------------
data FreezeFlags = FreezeFlags {
freezeDryRun :: Flag Bool,
freezeTests :: Flag Bool,
freezeBenchmarks :: Flag Bool,
freezeSolver :: Flag PreSolver,
freezeMaxBackjumps :: Flag Int,
freezeReorderGoals :: Flag ReorderGoals,
freezeCountConflicts :: Flag CountConflicts,
freezeFineGrainedConflicts :: Flag FineGrainedConflicts,
freezeMinimizeConflictSet :: Flag MinimizeConflictSet,
freezeIndependentGoals :: Flag IndependentGoals,
freezeShadowPkgs :: Flag ShadowPkgs,
freezeStrongFlags :: Flag StrongFlags,
freezeAllowBootLibInstalls :: Flag AllowBootLibInstalls,
freezeOnlyConstrained :: Flag OnlyConstrained,
freezeVerbosity :: Flag Verbosity
}
defaultFreezeFlags :: FreezeFlags
defaultFreezeFlags = FreezeFlags {
freezeDryRun = toFlag False,
freezeTests = toFlag False,
freezeBenchmarks = toFlag False,
freezeSolver = Flag defaultSolver,
freezeMaxBackjumps = Flag defaultMaxBackjumps,
freezeReorderGoals = Flag (ReorderGoals False),
freezeCountConflicts = Flag (CountConflicts True),
freezeFineGrainedConflicts = Flag (FineGrainedConflicts True),
freezeMinimizeConflictSet = Flag (MinimizeConflictSet False),
freezeIndependentGoals = Flag (IndependentGoals False),
freezeShadowPkgs = Flag (ShadowPkgs False),
freezeStrongFlags = Flag (StrongFlags False),
freezeAllowBootLibInstalls = Flag (AllowBootLibInstalls False),
freezeOnlyConstrained = Flag OnlyConstrainedNone,
freezeVerbosity = toFlag normal
}
freezeCommand :: CommandUI FreezeFlags
freezeCommand = CommandUI {
commandName = "freeze",
commandSynopsis = "Freeze dependencies.",
commandDescription = Just $ \_ -> wrapText $
"Calculates a valid set of dependencies and their exact versions. "
++ "If successful, saves the result to the file `cabal.config`.\n"
++ "\n"
++ "The package versions specified in `cabal.config` will be used for "
++ "any future installs.\n"
++ "\n"
++ "An existing `cabal.config` is ignored and overwritten.\n",
commandNotes = Nothing,
commandUsage = usageFlags "freeze",
commandDefaultFlags = defaultFreezeFlags,
commandOptions = \ showOrParseArgs -> [
optionVerbosity freezeVerbosity
(\v flags -> flags { freezeVerbosity = v })
, option [] ["dry-run"]
"Do not freeze anything, only print what would be frozen"
freezeDryRun (\v flags -> flags { freezeDryRun = v })
trueArg
, option [] ["tests"]
("freezing of the dependencies of any tests suites "
++ "in the package description file.")
freezeTests (\v flags -> flags { freezeTests = v })
(boolOpt [] [])
, option [] ["benchmarks"]
("freezing of the dependencies of any benchmarks suites "
++ "in the package description file.")
freezeBenchmarks (\v flags -> flags { freezeBenchmarks = v })
(boolOpt [] [])
] ++
optionSolver
freezeSolver (\v flags -> flags { freezeSolver = v }):
optionSolverFlags showOrParseArgs
freezeMaxBackjumps (\v flags -> flags { freezeMaxBackjumps = v })
freezeReorderGoals (\v flags -> flags { freezeReorderGoals = v })
freezeCountConflicts (\v flags -> flags { freezeCountConflicts = v })
freezeFineGrainedConflicts (\v flags -> flags { freezeFineGrainedConflicts = v })
freezeMinimizeConflictSet (\v flags -> flags { freezeMinimizeConflictSet = v })
freezeIndependentGoals (\v flags -> flags { freezeIndependentGoals = v })
freezeShadowPkgs (\v flags -> flags { freezeShadowPkgs = v })
freezeStrongFlags (\v flags -> flags { freezeStrongFlags = v })
freezeAllowBootLibInstalls (\v flags -> flags { freezeAllowBootLibInstalls = v })
freezeOnlyConstrained (\v flags -> flags { freezeOnlyConstrained = v })
}
-- ------------------------------------------------------------
-- * 'gen-bounds' command
-- ------------------------------------------------------------
genBoundsCommand :: CommandUI FreezeFlags
genBoundsCommand = CommandUI {
commandName = "gen-bounds",
commandSynopsis = "Generate dependency bounds.",
commandDescription = Just $ \_ -> wrapText $
"Generates bounds for all dependencies that do not currently have them. "
++ "Generated bounds are printed to stdout. "
++ "You can then paste them into your .cabal file.\n"
++ "\n",
commandNotes = Nothing,
commandUsage = usageFlags "gen-bounds",
commandDefaultFlags = defaultFreezeFlags,
commandOptions = \ _ -> [
optionVerbosity freezeVerbosity (\v flags -> flags { freezeVerbosity = v })
]
}
-- ------------------------------------------------------------
-- * 'outdated' command
-- ------------------------------------------------------------
data IgnoreMajorVersionBumps = IgnoreMajorVersionBumpsNone
| IgnoreMajorVersionBumpsAll
| IgnoreMajorVersionBumpsSome [PackageName]
instance Monoid IgnoreMajorVersionBumps where
mempty = IgnoreMajorVersionBumpsNone
mappend = (<>)
instance Semigroup IgnoreMajorVersionBumps where
IgnoreMajorVersionBumpsNone <> r = r
l@IgnoreMajorVersionBumpsAll <> _ = l
l@(IgnoreMajorVersionBumpsSome _) <> IgnoreMajorVersionBumpsNone = l
(IgnoreMajorVersionBumpsSome _) <> r@IgnoreMajorVersionBumpsAll = r
(IgnoreMajorVersionBumpsSome a) <> (IgnoreMajorVersionBumpsSome b) =
IgnoreMajorVersionBumpsSome (a ++ b)
data OutdatedFlags = OutdatedFlags {
outdatedVerbosity :: Flag Verbosity,
outdatedFreezeFile :: Flag Bool,
outdatedNewFreezeFile :: Flag Bool,
outdatedProjectFile :: Flag FilePath,
outdatedSimpleOutput :: Flag Bool,
outdatedExitCode :: Flag Bool,
outdatedQuiet :: Flag Bool,
outdatedIgnore :: [PackageName],
outdatedMinor :: Maybe IgnoreMajorVersionBumps
}
defaultOutdatedFlags :: OutdatedFlags
defaultOutdatedFlags = OutdatedFlags {
outdatedVerbosity = toFlag normal,
outdatedFreezeFile = mempty,
outdatedNewFreezeFile = mempty,
outdatedProjectFile = mempty,
outdatedSimpleOutput = mempty,
outdatedExitCode = mempty,
outdatedQuiet = mempty,
outdatedIgnore = mempty,
outdatedMinor = mempty
}
outdatedCommand :: CommandUI OutdatedFlags
outdatedCommand = CommandUI {
commandName = "outdated",
commandSynopsis = "Check for outdated dependencies",
commandDescription = Just $ \_ -> wrapText $
"Checks for outdated dependencies in the package description file "
++ "or freeze file",
commandNotes = Nothing,
commandUsage = usageFlags "outdated",
commandDefaultFlags = defaultOutdatedFlags,
commandOptions = \ _ -> [
optionVerbosity outdatedVerbosity
(\v flags -> flags { outdatedVerbosity = v })
,option [] ["freeze-file", "v1-freeze-file"]
"Act on the freeze file"
outdatedFreezeFile (\v flags -> flags { outdatedFreezeFile = v })
trueArg
,option [] ["v2-freeze-file", "new-freeze-file"]
"Act on the new-style freeze file (default: cabal.project.freeze)"
outdatedNewFreezeFile (\v flags -> flags { outdatedNewFreezeFile = v })
trueArg
,option [] ["project-file"]
"Act on the new-style freeze file named PROJECTFILE.freeze rather than the default cabal.project.freeze"
outdatedProjectFile (\v flags -> flags { outdatedProjectFile = v })
(reqArgFlag "PROJECTFILE")
,option [] ["simple-output"]
"Only print names of outdated dependencies, one per line"
outdatedSimpleOutput (\v flags -> flags { outdatedSimpleOutput = v })
trueArg
,option [] ["exit-code"]
"Exit with non-zero when there are outdated dependencies"
outdatedExitCode (\v flags -> flags { outdatedExitCode = v })
trueArg
,option ['q'] ["quiet"]
"Don't print any output. Implies '--exit-code' and '-v0'"
outdatedQuiet (\v flags -> flags { outdatedQuiet = v })
trueArg
,option [] ["ignore"]
"Packages to ignore"
outdatedIgnore (\v flags -> flags { outdatedIgnore = v })
(reqArg "PKGS" pkgNameListParser (map prettyShow))
,option [] ["minor"]
"Ignore major version bumps for these packages"
outdatedMinor (\v flags -> flags { outdatedMinor = v })
(optArg "PKGS" ignoreMajorVersionBumpsParser
(Just IgnoreMajorVersionBumpsAll) ignoreMajorVersionBumpsPrinter)
]
}
where
ignoreMajorVersionBumpsPrinter :: (Maybe IgnoreMajorVersionBumps)
-> [Maybe String]
ignoreMajorVersionBumpsPrinter Nothing = []
ignoreMajorVersionBumpsPrinter (Just IgnoreMajorVersionBumpsNone)= []
ignoreMajorVersionBumpsPrinter (Just IgnoreMajorVersionBumpsAll) = [Nothing]
ignoreMajorVersionBumpsPrinter (Just (IgnoreMajorVersionBumpsSome pkgs)) =
map (Just . prettyShow) $ pkgs
ignoreMajorVersionBumpsParser =
(Just . IgnoreMajorVersionBumpsSome) `fmap` pkgNameListParser
pkgNameListParser = parsecToReadE
("Couldn't parse the list of package names: " ++)
(fmap toList (P.sepByNonEmpty parsec (P.char ',')))
-- ------------------------------------------------------------
-- * Update command
-- ------------------------------------------------------------
data UpdateFlags
= UpdateFlags {
updateVerbosity :: Flag Verbosity,
updateIndexState :: Flag TotalIndexState
} deriving Generic
defaultUpdateFlags :: UpdateFlags
defaultUpdateFlags
= UpdateFlags {
updateVerbosity = toFlag normal,
updateIndexState = toFlag headTotalIndexState
}
-- ------------------------------------------------------------
-- * Other commands
-- ------------------------------------------------------------
cleanCommand :: CommandUI CleanFlags
cleanCommand = Cabal.cleanCommand
{ commandUsage = \pname ->
"Usage: " ++ pname ++ " v1-clean [FLAGS]\n"
}
checkCommand :: CommandUI (Flag Verbosity)
checkCommand = CommandUI {
commandName = "check",
commandSynopsis = "Check the package for common mistakes.",
commandDescription = Just $ \_ -> wrapText $
"Expects a .cabal package file in the current directory.\n"
++ "\n"
++ "The checks correspond to the requirements to packages on Hackage. "
++ "If no errors and warnings are reported, Hackage will accept this "
++ "package.\n",
commandNotes = Nothing,
commandUsage = usageFlags "check",
commandDefaultFlags = toFlag normal,
commandOptions = \_ -> [optionVerbosity id const]
}
formatCommand :: CommandUI (Flag Verbosity)
formatCommand = CommandUI {
commandName = "format",
commandSynopsis = "Reformat the .cabal file using the standard style.",
commandDescription = Nothing,
commandNotes = Nothing,
commandUsage = usageAlternatives "format" ["[FILE]"],
commandDefaultFlags = toFlag normal,
commandOptions = \_ -> []
}
manpageCommand :: CommandUI ManpageFlags
manpageCommand = CommandUI {
commandName = "man",
commandSynopsis = "Outputs manpage source.",
commandDescription = Just $ \_ ->
"Output manpage source to STDOUT.\n",
commandNotes = Nothing,
commandUsage = usageFlags "man",
commandDefaultFlags = defaultManpageFlags,
commandOptions = manpageOptions
}
runCommand :: CommandUI BuildFlags
runCommand = CommandUI {
commandName = "run",
commandSynopsis = "Builds and runs an executable.",
commandDescription = Just $ \pname -> wrapText $
"Builds and then runs the specified executable. If no executable is "
++ "specified, but the package contains just one executable, that one "
++ "is built and executed.\n"
++ "\n"
++ "Use `" ++ pname ++ " v1-test --show-details=streaming` to run a "
++ "test-suite and get its full output.\n",
commandNotes = Just $ \pname ->
"Examples:\n"
++ " " ++ pname ++ " v1-run\n"
++ " Run the only executable in the current package;\n"
++ " " ++ pname ++ " v1-run foo -- --fooflag\n"
++ " Works similar to `./foo --fooflag`.\n",
commandUsage = usageAlternatives "v1-run"
["[FLAGS] [EXECUTABLE] [-- EXECUTABLE_FLAGS]"],
commandDefaultFlags = mempty,
commandOptions = commandOptions parent
}
where
parent = Cabal.buildCommand defaultProgramDb
-- ------------------------------------------------------------
-- * Report flags
-- ------------------------------------------------------------
data ReportFlags = ReportFlags {
reportUsername :: Flag Username,
reportPassword :: Flag Password,
reportVerbosity :: Flag Verbosity
} deriving Generic
defaultReportFlags :: ReportFlags
defaultReportFlags = ReportFlags {
reportUsername = mempty,
reportPassword = mempty,
reportVerbosity = toFlag normal
}
reportCommand :: CommandUI ReportFlags
reportCommand = CommandUI {
commandName = "report",
commandSynopsis = "Upload build reports to a remote server.",
commandDescription = Nothing,
commandNotes = Just $ \_ ->
"You can store your Hackage login in the ~/.cabal/config file\n",
commandUsage = usageAlternatives "report" ["[FLAGS]"],
commandDefaultFlags = defaultReportFlags,
commandOptions = \_ ->
[optionVerbosity reportVerbosity (\v flags -> flags { reportVerbosity = v })
,option ['u'] ["username"]
"Hackage username."
reportUsername (\v flags -> flags { reportUsername = v })
(reqArg' "USERNAME" (toFlag . Username)
(flagToList . fmap unUsername))
,option ['p'] ["password"]
"Hackage password."
reportPassword (\v flags -> flags { reportPassword = v })
(reqArg' "PASSWORD" (toFlag . Password)
(flagToList . fmap unPassword))
]
}
instance Monoid ReportFlags where
mempty = gmempty
mappend = (<>)
instance Semigroup ReportFlags where
(<>) = gmappend
-- ------------------------------------------------------------
-- * Get flags
-- ------------------------------------------------------------
data GetFlags = GetFlags {
getDestDir :: Flag FilePath,
getPristine :: Flag Bool,
getIndexState :: Flag TotalIndexState,
getActiveRepos :: Flag ActiveRepos,
getSourceRepository :: Flag (Maybe RepoKind),
getVerbosity :: Flag Verbosity
} deriving Generic
defaultGetFlags :: GetFlags
defaultGetFlags = GetFlags {
getDestDir = mempty,
getPristine = mempty,
getIndexState = mempty,
getActiveRepos = mempty,
getSourceRepository = mempty,
getVerbosity = toFlag normal
}
getCommand :: CommandUI GetFlags
getCommand = CommandUI {
commandName = "get",
commandSynopsis = "Download/Extract a package's source code (repository).",
commandDescription = Just $ \_ -> wrapText $
"Creates a local copy of a package's source code. By default it gets "
++ "the source\ntarball and unpacks it in a local subdirectory. "
++ "Alternatively, with -s it will\nget the code from the source "
++ "repository specified by the package.\n",
commandNotes = Just $ \pname ->
"Examples:\n"
++ " " ++ pname ++ " get hlint\n"
++ " Download the latest stable version of hlint;\n"
++ " " ++ pname ++ " get lens --source-repository=head\n"
++ " Download the source repository (i.e. git clone from github).\n",
commandUsage = usagePackages "get",
commandDefaultFlags = defaultGetFlags,
commandOptions = \_ -> [
optionVerbosity getVerbosity (\v flags -> flags { getVerbosity = v })
,option "d" ["destdir"]
"Where to place the package source, defaults to the current directory."
getDestDir (\v flags -> flags { getDestDir = v })
(reqArgFlag "PATH")
,option "s" ["source-repository"]
"Copy the package's source repository (ie git clone, darcs get, etc as appropriate)."
getSourceRepository (\v flags -> flags { getSourceRepository = v })
(optArg "[head|this|...]" (parsecToReadE (const "invalid source-repository")
(fmap (toFlag . Just) parsec))
(Flag Nothing)
(map (fmap show) . flagToList))
, option [] ["index-state"]
("Use source package index state as it existed at a previous time. " ++
"Accepts unix-timestamps (e.g. '@1474732068'), ISO8601 UTC timestamps " ++
"(e.g. '2016-09-24T17:47:48Z'), or 'HEAD' (default: 'HEAD'). " ++
"This determines which package versions are available as well as " ++
".cabal file revision is selected (unless --pristine is used).")
getIndexState (\v flags -> flags { getIndexState = v })
(reqArg "STATE" (parsecToReadE (const $ "index-state must be a " ++
"unix-timestamps (e.g. '@1474732068'), " ++
"a ISO8601 UTC timestamp " ++
"(e.g. '2016-09-24T17:47:48Z'), or 'HEAD'")
(toFlag `fmap` parsec))
(flagToList . fmap prettyShow))
, option [] ["pristine"]
("Unpack the original pristine tarball, rather than updating the "
++ ".cabal file with the latest revision from the package archive.")
getPristine (\v flags -> flags { getPristine = v })
trueArg
]
}
-- 'cabal unpack' is a deprecated alias for 'cabal get'.
unpackCommand :: CommandUI GetFlags
unpackCommand = getCommand {
commandName = "unpack",
commandUsage = usagePackages "unpack"
}
instance Monoid GetFlags where
mempty = gmempty
mappend = (<>)
instance Semigroup GetFlags where
(<>) = gmappend
-- ------------------------------------------------------------
-- * List flags
-- ------------------------------------------------------------
data ListFlags = ListFlags
{ listInstalled :: Flag Bool
, listSimpleOutput :: Flag Bool
, listCaseInsensitive :: Flag Bool
, listVerbosity :: Flag Verbosity
, listPackageDBs :: [Maybe PackageDB]
, listHcPath :: Flag FilePath
}
deriving Generic
defaultListFlags :: ListFlags
defaultListFlags = ListFlags
{ listInstalled = Flag False
, listSimpleOutput = Flag False
, listCaseInsensitive = Flag True
, listVerbosity = toFlag normal
, listPackageDBs = []
, listHcPath = mempty
}
listCommand :: CommandUI ListFlags
listCommand = CommandUI {
commandName = "list",
commandSynopsis = "List packages matching a search string.",
commandDescription = Just $ \_ -> wrapText $
"List all packages, or all packages matching one of the search"
++ " strings.\n"
++ "\n"
++ "Use the package database specified with --package-db. "
++ "If not specified, use the user package database.\n",
commandNotes = Just $ \pname ->
"Examples:\n"
++ " " ++ pname ++ " list pandoc\n"
++ " Will find pandoc, pandoc-citeproc, pandoc-lens, ...\n",
commandUsage = usageAlternatives "list" [ "[FLAGS]"
, "[FLAGS] STRINGS"],
commandDefaultFlags = defaultListFlags,
commandOptions = const listOptions
}
listOptions :: [OptionField ListFlags]
listOptions =
[ optionVerbosity listVerbosity (\v flags -> flags { listVerbosity = v })
, option [] ["installed"]
"Only print installed packages"
listInstalled (\v flags -> flags { listInstalled = v })
trueArg
, option [] ["simple-output"]
"Print in a easy-to-parse format"
listSimpleOutput (\v flags -> flags { listSimpleOutput = v })
trueArg
, option ['i'] ["ignore-case"]
"Ignore case destictions"
listCaseInsensitive (\v flags -> flags { listCaseInsensitive = v })
(boolOpt' (['i'], ["ignore-case"]) (['I'], ["strict-case"]))
, option "" ["package-db"]
( "Append the given package database to the list of package"
++ " databases used (to satisfy dependencies and register into)."
++ " May be a specific file, 'global' or 'user'. The initial list"
++ " is ['global'], ['global', 'user'],"
++ " depending on context. Use 'clear' to reset the list to empty."
++ " See the user guide for details.")
listPackageDBs (\v flags -> flags { listPackageDBs = v })
(reqArg' "DB" readPackageDbList showPackageDbList)
, option "w" ["with-compiler"]
"give the path to a particular compiler"
listHcPath (\v flags -> flags { listHcPath = v })
(reqArgFlag "PATH")
]
listNeedsCompiler :: ListFlags -> Bool
listNeedsCompiler f =
flagElim False (const True) (listHcPath f)
|| fromFlagOrDefault False (listInstalled f)
instance Monoid ListFlags where
mempty = gmempty
mappend = (<>)
instance Semigroup ListFlags where
(<>) = gmappend
-- ------------------------------------------------------------
-- * Info flags
-- ------------------------------------------------------------
data InfoFlags = InfoFlags {
infoVerbosity :: Flag Verbosity,
infoPackageDBs :: [Maybe PackageDB]
} deriving Generic
defaultInfoFlags :: InfoFlags
defaultInfoFlags = InfoFlags {
infoVerbosity = toFlag normal,
infoPackageDBs = []
}
infoCommand :: CommandUI InfoFlags
infoCommand = CommandUI {
commandName = "info",
commandSynopsis = "Display detailed information about a particular package.",
commandDescription = Just $ \_ -> wrapText $
"Use the package database specified with --package-db. "
++ "If not specified, use the user package database.\n",
commandNotes = Nothing,
commandUsage = usageAlternatives "info" ["[FLAGS] PACKAGES"],
commandDefaultFlags = defaultInfoFlags,
commandOptions = \_ -> [
optionVerbosity infoVerbosity (\v flags -> flags { infoVerbosity = v })
, option "" ["package-db"]
( "Append the given package database to the list of package"
++ " databases used (to satisfy dependencies and register into)."
++ " May be a specific file, 'global' or 'user'. The initial list"
++ " is ['global'], ['global', 'user'],"
++ " depending on context. Use 'clear' to reset the list to empty."
++ " See the user guide for details.")
infoPackageDBs (\v flags -> flags { infoPackageDBs = v })
(reqArg' "DB" readPackageDbList showPackageDbList)
]
}
instance Monoid InfoFlags where
mempty = gmempty
mappend = (<>)
instance Semigroup InfoFlags where
(<>) = gmappend
-- ------------------------------------------------------------
-- * Install flags
-- ------------------------------------------------------------
-- | Install takes the same flags as configure along with a few extras.
--
data InstallFlags = InstallFlags {
installDocumentation :: Flag Bool,
installHaddockIndex :: Flag PathTemplate,
installDest :: Flag Cabal.CopyDest,
installDryRun :: Flag Bool,
installOnlyDownload :: Flag Bool,
installMaxBackjumps :: Flag Int,
installReorderGoals :: Flag ReorderGoals,
installCountConflicts :: Flag CountConflicts,
installFineGrainedConflicts :: Flag FineGrainedConflicts,
installMinimizeConflictSet :: Flag MinimizeConflictSet,
installIndependentGoals :: Flag IndependentGoals,
installShadowPkgs :: Flag ShadowPkgs,
installStrongFlags :: Flag StrongFlags,
installAllowBootLibInstalls :: Flag AllowBootLibInstalls,
installOnlyConstrained :: Flag OnlyConstrained,
installReinstall :: Flag Bool,
installAvoidReinstalls :: Flag AvoidReinstalls,
installOverrideReinstall :: Flag Bool,
installUpgradeDeps :: Flag Bool,
installOnly :: Flag Bool,
installOnlyDeps :: Flag Bool,
installIndexState :: Flag TotalIndexState,
installRootCmd :: Flag String,
installSummaryFile :: NubList PathTemplate,
installLogFile :: Flag PathTemplate,
installBuildReports :: Flag ReportLevel,
installReportPlanningFailure :: Flag Bool,
-- Note: symlink-bindir is no longer used by v2-install and can be removed
-- when removing v1 commands
installSymlinkBinDir :: Flag FilePath,
installPerComponent :: Flag Bool,
installOneShot :: Flag Bool,
installNumJobs :: Flag (Maybe Int),
installKeepGoing :: Flag Bool,
installRunTests :: Flag Bool,
installOfflineMode :: Flag Bool
}
deriving (Eq, Show, Generic)
instance Binary InstallFlags
defaultInstallFlags :: InstallFlags
defaultInstallFlags = InstallFlags {
installDocumentation = Flag False,
installHaddockIndex = Flag docIndexFile,
installDest = Flag Cabal.NoCopyDest,
installDryRun = Flag False,
installOnlyDownload = Flag False,
installMaxBackjumps = Flag defaultMaxBackjumps,
installReorderGoals = Flag (ReorderGoals False),
installCountConflicts = Flag (CountConflicts True),
installFineGrainedConflicts = Flag (FineGrainedConflicts True),
installMinimizeConflictSet = Flag (MinimizeConflictSet False),
installIndependentGoals= Flag (IndependentGoals False),
installShadowPkgs = Flag (ShadowPkgs False),
installStrongFlags = Flag (StrongFlags False),
installAllowBootLibInstalls = Flag (AllowBootLibInstalls False),
installOnlyConstrained = Flag OnlyConstrainedNone,
installReinstall = Flag False,
installAvoidReinstalls = Flag (AvoidReinstalls False),
installOverrideReinstall = Flag False,
installUpgradeDeps = Flag False,
installOnly = Flag False,
installOnlyDeps = Flag False,
installIndexState = mempty,
installRootCmd = mempty,
installSummaryFile = mempty,
installLogFile = mempty,
installBuildReports = Flag NoReports,
installReportPlanningFailure = Flag False,
installSymlinkBinDir = mempty,
installPerComponent = Flag True,
installOneShot = Flag False,
installNumJobs = mempty,
installKeepGoing = Flag False,
installRunTests = mempty,
installOfflineMode = Flag False
}
where
docIndexFile = toPathTemplate ("$datadir" </> "doc"
</> "$arch-$os-$compiler" </> "index.html")
defaultMaxBackjumps :: Int
defaultMaxBackjumps = 4000
defaultSolver :: PreSolver
defaultSolver = AlwaysModular
allSolvers :: String
allSolvers = intercalate ", " (map prettyShow ([minBound .. maxBound] :: [PreSolver]))
installCommand :: CommandUI ( ConfigFlags, ConfigExFlags, InstallFlags
, HaddockFlags, TestFlags, BenchmarkFlags
)
installCommand = CommandUI {
commandName = "install",
commandSynopsis = "Install packages.",
commandUsage = usageAlternatives "v1-install" [ "[FLAGS]"
, "[FLAGS] PACKAGES"
],
commandDescription = Just $ \_ -> wrapText $
"Installs one or more packages. By default, the installed package"
++ " will be registered in the user's package database."
++ "\n"
++ "If PACKAGES are specified, downloads and installs those packages."
++ " Otherwise, install the package in the current directory (and/or its"
++ " dependencies) (there must be exactly one .cabal file in the current"
++ " directory).\n"
++ "\n"
++ "The flags to `v1-install` are saved and"
++ " affect future commands such as `v1-build` and `v1-repl`. See the help for"
++ " `v1-configure` for a list of commands being affected.\n"
++ "\n"
++ "Installed executables will by default"
++ " be put into `~/.cabal/bin/`."
++ " If you want installed executable to be available globally, make"
++ " sure that the PATH environment variable contains that directory.\n"
++ "\n",
commandNotes = Just $ \pname ->
( case commandNotes
$ Cabal.configureCommand defaultProgramDb
of Just desc -> desc pname ++ "\n"
Nothing -> ""
)
++ "Examples:\n"
++ " " ++ pname ++ " v1-install "
++ " Package in the current directory\n"
++ " " ++ pname ++ " v1-install foo "
++ " Package from the hackage server\n"
++ " " ++ pname ++ " v1-install foo-1.0 "
++ " Specific version of a package\n"
++ " " ++ pname ++ " v1-install 'foo < 2' "
++ " Constrained package version\n"
++ " " ++ pname ++ " v1-install haddock --bindir=$HOME/hask-bin/ --datadir=$HOME/hask-data/\n"
++ " " ++ (map (const ' ') pname)
++ " "
++ " Change installation destination\n",
commandDefaultFlags = (mempty, mempty, mempty, mempty, mempty, mempty),
commandOptions = \showOrParseArgs ->
liftOptions get1 set1
-- Note: [Hidden Flags]
-- hide "constraint", "dependency", and
-- "exact-configuration" from the configure options.
(filter ((`notElem` ["constraint", "dependency"
, "exact-configuration"])
. optionName) $
configureOptions showOrParseArgs)
++ liftOptions get2 set2 (configureExOptions showOrParseArgs ConstraintSourceCommandlineFlag)
++ liftOptions get3 set3
-- hide "target-package-db" flag from the
-- install options.
(filter ((`notElem` ["target-package-db"])
. optionName) $
installOptions showOrParseArgs)
++ liftOptions get4 set4 (haddockOptions showOrParseArgs)
++ liftOptions get5 set5 (testOptions showOrParseArgs)
++ liftOptions get6 set6 (benchmarkOptions showOrParseArgs)
}
where
get1 (a,_,_,_,_,_) = a; set1 a (_,b,c,d,e,f) = (a,b,c,d,e,f)
get2 (_,b,_,_,_,_) = b; set2 b (a,_,c,d,e,f) = (a,b,c,d,e,f)
get3 (_,_,c,_,_,_) = c; set3 c (a,b,_,d,e,f) = (a,b,c,d,e,f)
get4 (_,_,_,d,_,_) = d; set4 d (a,b,c,_,e,f) = (a,b,c,d,e,f)
get5 (_,_,_,_,e,_) = e; set5 e (a,b,c,d,_,f) = (a,b,c,d,e,f)
get6 (_,_,_,_,_,f) = f; set6 f (a,b,c,d,e,_) = (a,b,c,d,e,f)
haddockCommand :: CommandUI HaddockFlags
haddockCommand = Cabal.haddockCommand
{ commandUsage = usageAlternatives "v1-haddock" $
[ "[FLAGS]", "COMPONENTS [FLAGS]" ]
}
filterHaddockArgs :: [String] -> Version -> [String]
filterHaddockArgs args cabalLibVersion
| cabalLibVersion >= mkVersion [2,3,0] = args_latest
| cabalLibVersion < mkVersion [2,3,0] = args_2_3_0
| otherwise = args_latest
where
args_latest = args
-- Cabal < 2.3 doesn't know about per-component haddock
args_2_3_0 = []
filterHaddockFlags :: HaddockFlags -> Version -> HaddockFlags
filterHaddockFlags flags cabalLibVersion
| cabalLibVersion >= mkVersion [2,3,0] = flags_latest
| cabalLibVersion < mkVersion [2,3,0] = flags_2_3_0
| otherwise = flags_latest
where
flags_latest = flags
flags_2_3_0 = flags_latest {
-- Cabal < 2.3 doesn't know about per-component haddock
haddockArgs = []
}
haddockOptions :: ShowOrParseArgs -> [OptionField HaddockFlags]
haddockOptions showOrParseArgs
= [ opt { optionName = "haddock-" ++ name,
optionDescr = [ fmapOptFlags (\(_, lflags) -> ([], map ("haddock-" ++) lflags)) descr
| descr <- optionDescr opt] }
| opt <- commandOptions Cabal.haddockCommand showOrParseArgs
, let name = optionName opt
, name `elem` ["hoogle", "html", "html-location"
,"executables", "tests", "benchmarks", "all", "internal", "css"
,"hyperlink-source", "quickjump", "hscolour-css"
,"contents-location", "for-hackage"]
]
testOptions :: ShowOrParseArgs -> [OptionField TestFlags]
testOptions showOrParseArgs
= [ opt { optionName = prefixTest name,
optionDescr = [ fmapOptFlags (\(_, lflags) -> ([], map prefixTest lflags)) descr
| descr <- optionDescr opt] }
| opt <- commandOptions Cabal.testCommand showOrParseArgs
, let name = optionName opt
, name `elem` ["log", "machine-log", "show-details", "keep-tix-files"
,"fail-when-no-test-suites", "test-options", "test-option"
,"test-wrapper"]
]
where
prefixTest name | "test-" `isPrefixOf` name = name
| otherwise = "test-" ++ name
benchmarkOptions :: ShowOrParseArgs -> [OptionField BenchmarkFlags]
benchmarkOptions showOrParseArgs
= [ opt { optionName = prefixBenchmark name,
optionDescr = [ fmapOptFlags (\(_, lflags) -> ([], map prefixBenchmark lflags)) descr
| descr <- optionDescr opt] }
| opt <- commandOptions Cabal.benchmarkCommand showOrParseArgs
, let name = optionName opt
, name `elem` ["benchmark-options", "benchmark-option"]
]
where
prefixBenchmark name | "benchmark-" `isPrefixOf` name = name
| otherwise = "benchmark-" ++ name
fmapOptFlags :: (OptFlags -> OptFlags) -> OptDescr a -> OptDescr a
fmapOptFlags modify (ReqArg d f p r w) = ReqArg d (modify f) p r w
fmapOptFlags modify (OptArg d f p r i w) = OptArg d (modify f) p r i w
fmapOptFlags modify (ChoiceOpt xs) = ChoiceOpt [(d, modify f, i, w) | (d, f, i, w) <- xs]
fmapOptFlags modify (BoolOpt d f1 f2 r w) = BoolOpt d (modify f1) (modify f2) r w
installOptions :: ShowOrParseArgs -> [OptionField InstallFlags]
installOptions showOrParseArgs =
[ option "" ["documentation"]
"building of documentation"
installDocumentation (\v flags -> flags { installDocumentation = v })
(boolOpt [] [])
, option [] ["doc-index-file"]
"A central index of haddock API documentation (template cannot use $pkgid)"
installHaddockIndex (\v flags -> flags { installHaddockIndex = v })
(reqArg' "TEMPLATE" (toFlag.toPathTemplate)
(flagToList . fmap fromPathTemplate))
, option [] ["dry-run"]
"Do not install anything, only print what would be installed."
installDryRun (\v flags -> flags { installDryRun = v })
trueArg
, option [] ["only-download"]
"Do not build anything, only fetch the packages."
installOnlyDownload (\v flags -> flags { installOnlyDownload = v })
trueArg
, option "" ["target-package-db"]
"package database to install into. Required when using ${pkgroot} prefix."
installDest (\v flags -> flags { installDest = v })
(reqArg "DATABASE" (succeedReadE (Flag . Cabal.CopyToDb))
(\f -> case f of Flag (Cabal.CopyToDb p) -> [p]; _ -> []))
] ++
optionSolverFlags showOrParseArgs
installMaxBackjumps (\v flags -> flags { installMaxBackjumps = v })
installReorderGoals (\v flags -> flags { installReorderGoals = v })
installCountConflicts (\v flags -> flags { installCountConflicts = v })
installFineGrainedConflicts (\v flags -> flags { installFineGrainedConflicts = v })
installMinimizeConflictSet (\v flags -> flags { installMinimizeConflictSet = v })
installIndependentGoals (\v flags -> flags { installIndependentGoals = v })
installShadowPkgs (\v flags -> flags { installShadowPkgs = v })
installStrongFlags (\v flags -> flags { installStrongFlags = v })
installAllowBootLibInstalls (\v flags -> flags { installAllowBootLibInstalls = v })
installOnlyConstrained (\v flags -> flags { installOnlyConstrained = v }) ++
[ option [] ["reinstall"]
"Install even if it means installing the same version again."
installReinstall (\v flags -> flags { installReinstall = v })
(yesNoOpt showOrParseArgs)
, option [] ["avoid-reinstalls"]
"Do not select versions that would destructively overwrite installed packages."
(fmap asBool . installAvoidReinstalls)
(\v flags -> flags { installAvoidReinstalls = fmap AvoidReinstalls v })
(yesNoOpt showOrParseArgs)
, option [] ["force-reinstalls"]
"Reinstall packages even if they will most likely break other installed packages."
installOverrideReinstall (\v flags -> flags { installOverrideReinstall = v })
(yesNoOpt showOrParseArgs)
, option [] ["upgrade-dependencies"]
"Pick the latest version for all dependencies, rather than trying to pick an installed version."
installUpgradeDeps (\v flags -> flags { installUpgradeDeps = v })
(yesNoOpt showOrParseArgs)
, option [] ["only-dependencies"]
"Install only the dependencies necessary to build the given packages"
installOnlyDeps (\v flags -> flags { installOnlyDeps = v })
(yesNoOpt showOrParseArgs)
, option [] ["dependencies-only"]
"A synonym for --only-dependencies"
installOnlyDeps (\v flags -> flags { installOnlyDeps = v })
(yesNoOpt showOrParseArgs)
, option [] ["index-state"]
("Use source package index state as it existed at a previous time. " ++
"Accepts unix-timestamps (e.g. '@1474732068'), ISO8601 UTC timestamps " ++
"(e.g. '2016-09-24T17:47:48Z'), or 'HEAD' (default: 'HEAD').")
installIndexState (\v flags -> flags { installIndexState = v })
(reqArg "STATE" (parsecToReadE (const $ "index-state must be a " ++
"unix-timestamps (e.g. '@1474732068'), " ++
"a ISO8601 UTC timestamp " ++
"(e.g. '2016-09-24T17:47:48Z'), or 'HEAD'")
(toFlag `fmap` parsec))
(flagToList . fmap prettyShow))
, option [] ["root-cmd"]
"(No longer supported, do not use.)"
installRootCmd (\v flags -> flags { installRootCmd = v })
(reqArg' "COMMAND" toFlag flagToList)
, option [] ["symlink-bindir"]
"Add symlinks to installed executables into this directory."
installSymlinkBinDir (\v flags -> flags { installSymlinkBinDir = v })
(reqArgFlag "DIR")
, option [] ["build-summary"]
"Save build summaries to file (name template can use $pkgid, $compiler, $os, $arch)"
installSummaryFile (\v flags -> flags { installSummaryFile = v })
(reqArg' "TEMPLATE" (\x -> toNubList [toPathTemplate x]) (map fromPathTemplate . fromNubList))
, option [] ["build-log"]
"Log all builds to file (name template can use $pkgid, $compiler, $os, $arch)"
installLogFile (\v flags -> flags { installLogFile = v })
(reqArg' "TEMPLATE" (toFlag.toPathTemplate)
(flagToList . fmap fromPathTemplate))
, option [] ["remote-build-reporting"]
"Generate build reports to send to a remote server (none, anonymous or detailed)."
installBuildReports (\v flags -> flags { installBuildReports = v })
(reqArg "LEVEL" (parsecToReadE (const $ "report level must be 'none', "
++ "'anonymous' or 'detailed'")
(toFlag `fmap` parsec))
(flagToList . fmap prettyShow))
, option [] ["report-planning-failure"]
"Generate build reports when the dependency solver fails. This is used by the Hackage build bot."
installReportPlanningFailure (\v flags -> flags { installReportPlanningFailure = v })
trueArg
, option "" ["per-component"]
"Per-component builds when possible"
installPerComponent (\v flags -> flags { installPerComponent = v })
(boolOpt [] [])
, option [] ["one-shot"]
"Do not record the packages in the world file."
installOneShot (\v flags -> flags { installOneShot = v })
(yesNoOpt showOrParseArgs)
, option [] ["run-tests"]
"Run package test suites during installation."
installRunTests (\v flags -> flags { installRunTests = v })
trueArg
, optionNumJobs
installNumJobs (\v flags -> flags { installNumJobs = v })
, option [] ["keep-going"]
"After a build failure, continue to build other unaffected packages."
installKeepGoing (\v flags -> flags { installKeepGoing = v })
trueArg
, option [] ["offline"]
"Don't download packages from the Internet."
installOfflineMode (\v flags -> flags { installOfflineMode = v })
(yesNoOpt showOrParseArgs)
] ++ case showOrParseArgs of -- TODO: remove when "cabal install"
-- avoids
ParseArgs ->
[ option [] ["only"]
"Only installs the package in the current directory."
installOnly (\v flags -> flags { installOnly = v })
trueArg ]
_ -> []
instance Monoid InstallFlags where
mempty = gmempty
mappend = (<>)
instance Semigroup InstallFlags where
(<>) = gmappend
-- ------------------------------------------------------------
-- * Upload flags
-- ------------------------------------------------------------
-- | Is this a candidate package or a package to be published?
data IsCandidate = IsCandidate | IsPublished
deriving Eq
data UploadFlags = UploadFlags {
uploadCandidate :: Flag IsCandidate,
uploadDoc :: Flag Bool,
uploadUsername :: Flag Username,
uploadPassword :: Flag Password,
uploadPasswordCmd :: Flag [String],
uploadVerbosity :: Flag Verbosity
} deriving Generic
defaultUploadFlags :: UploadFlags
defaultUploadFlags = UploadFlags {
uploadCandidate = toFlag IsCandidate,
uploadDoc = toFlag False,
uploadUsername = mempty,
uploadPassword = mempty,
uploadPasswordCmd = mempty,
uploadVerbosity = toFlag normal
}
uploadCommand :: CommandUI UploadFlags
uploadCommand = CommandUI {
commandName = "upload",
commandSynopsis = "Uploads source packages or documentation to Hackage.",
commandDescription = Nothing,
commandNotes = Just $ \_ ->
"You can store your Hackage login in the ~/.cabal/config file\n"
++ relevantConfigValuesText ["username", "password", "password-command"],
commandUsage = \pname ->
"Usage: " ++ pname ++ " upload [FLAGS] TARFILES\n",
commandDefaultFlags = defaultUploadFlags,
commandOptions = \_ ->
[optionVerbosity uploadVerbosity
(\v flags -> flags { uploadVerbosity = v })
,option [] ["publish"]
"Publish the package instead of uploading it as a candidate."
uploadCandidate (\v flags -> flags { uploadCandidate = v })
(noArg (Flag IsPublished))
,option ['d'] ["documentation"]
("Upload documentation instead of a source package. "
++ "By default, this uploads documentation for a package candidate. "
++ "To upload documentation for "
++ "a published package, combine with --publish.")
uploadDoc (\v flags -> flags { uploadDoc = v })
trueArg
,option ['u'] ["username"]
"Hackage username."
uploadUsername (\v flags -> flags { uploadUsername = v })
(reqArg' "USERNAME" (toFlag . Username)
(flagToList . fmap unUsername))
,option ['p'] ["password"]
"Hackage password."
uploadPassword (\v flags -> flags { uploadPassword = v })
(reqArg' "PASSWORD" (toFlag . Password)
(flagToList . fmap unPassword))
,option ['P'] ["password-command"]
"Command to get Hackage password."
uploadPasswordCmd (\v flags -> flags { uploadPasswordCmd = v })
(reqArg' "PASSWORD" (Flag . words) (fromMaybe [] . flagToMaybe))
]
}
instance Monoid UploadFlags where
mempty = gmempty
mappend = (<>)
instance Semigroup UploadFlags where
(<>) = gmappend
-- ------------------------------------------------------------
-- * Init flags
-- ------------------------------------------------------------
initCommand :: CommandUI IT.InitFlags
initCommand = CommandUI {
commandName = "init",
commandSynopsis = "Create a new .cabal package file.",
commandDescription = Just $ \_ -> wrapText $
"Create a .cabal, Setup.hs, and optionally a LICENSE file.\n"
++ "\n"
++ "Calling init with no arguments creates an executable, "
++ "guessing as many options as possible. The interactive "
++ "mode can be invoked by the -i/--interactive flag, which "
++ "will try to guess as much as possible and prompt you for "
++ "the rest. You can change init to always be interactive by "
++ "setting the interactive flag in your configuration file. "
++ "Command-line arguments are provided for scripting purposes.\n",
commandNotes = Nothing,
commandUsage = \pname ->
"Usage: " ++ pname ++ " init [FLAGS]\n",
commandDefaultFlags = IT.defaultInitFlags,
commandOptions = initOptions
}
initOptions :: ShowOrParseArgs -> [OptionField IT.InitFlags]
initOptions _ =
[ option ['i'] ["interactive"]
"interactive mode."
IT.interactive (\v flags -> flags { IT.interactive = v })
(boolOpt' (['i'], ["interactive"]) (['n'], ["non-interactive"]))
, option ['q'] ["quiet"]
"Do not generate log messages to stdout."
IT.quiet (\v flags -> flags { IT.quiet = v })
trueArg
, option [] ["no-comments"]
"Do not generate explanatory comments in the .cabal file."
IT.noComments (\v flags -> flags { IT.noComments = v })
trueArg
, option ['m'] ["minimal"]
"Generate a minimal .cabal file, that is, do not include extra empty fields. Also implies --no-comments."
IT.minimal (\v flags -> flags { IT.minimal = v })
trueArg
, option [] ["overwrite"]
"Overwrite any existing .cabal, LICENSE, or Setup.hs files without warning."
IT.overwrite (\v flags -> flags { IT.overwrite = v })
trueArg
, option [] ["package-dir", "packagedir"]
"Root directory of the package (default = current directory)."
IT.packageDir (\v flags -> flags { IT.packageDir = v })
(reqArgFlag "DIRECTORY")
, option ['p'] ["package-name"]
"Name of the Cabal package to create."
IT.packageName (\v flags -> flags { IT.packageName = v })
(reqArg "PACKAGE" (parsecToReadE ("Cannot parse package name: "++)
(toFlag `fmap` parsec))
(flagToList . fmap prettyShow))
, option [] ["version"]
"Initial version of the package."
IT.version (\v flags -> flags { IT.version = v })
(reqArg "VERSION" (parsecToReadE ("Cannot parse package version: "++)
(toFlag `fmap` parsec))
(flagToList . fmap prettyShow))
, option [] ["cabal-version"]
"Version of the Cabal specification."
IT.cabalVersion (\v flags -> flags { IT.cabalVersion = v })
(reqArg "CABALSPECVERSION" (parsecToReadE ("Cannot parse Cabal specification version: "++)
(fmap (toFlag . getSpecVersion) parsec))
(flagToList . fmap (prettyShow . SpecVersion)))
, option ['l'] ["license"]
"Project license."
IT.license (\v flags -> flags { IT.license = v })
(reqArg "LICENSE" (parsecToReadE ("Cannot parse license: "++)
(toFlag `fmap` parsec))
(flagToList . fmap prettyShow))
, option ['a'] ["author"]
"Name of the project's author."
IT.author (\v flags -> flags { IT.author = v })
(reqArgFlag "NAME")
, option ['e'] ["email"]
"Email address of the maintainer."
IT.email (\v flags -> flags { IT.email = v })
(reqArgFlag "EMAIL")
, option ['u'] ["homepage"]
"Project homepage and/or repository."
IT.homepage (\v flags -> flags { IT.homepage = v })
(reqArgFlag "URL")
, option ['s'] ["synopsis"]
"Short project synopsis."
IT.synopsis (\v flags -> flags { IT.synopsis = v })
(reqArgFlag "TEXT")
, option ['c'] ["category"]
"Project category."
IT.category (\v flags -> flags { IT.category = v })
(reqArg' "CATEGORY" (\s -> toFlag $ maybe (Left s) Right (readMaybe s))
(flagToList . fmap (either id show)))
, option ['x'] ["extra-source-file"]
"Extra source file to be distributed with tarball."
IT.extraSrc (\v flags -> flags { IT.extraSrc = v })
(reqArg' "FILE" (Just . (:[]))
(fromMaybe []))
, option [] ["lib", "is-library"]
"Build a library."
IT.packageType (\v flags -> flags { IT.packageType = v })
(noArg (Flag IT.Library))
, option [] ["exe", "is-executable"]
"Build an executable."
IT.packageType
(\v flags -> flags { IT.packageType = v })
(noArg (Flag IT.Executable))
, option [] ["libandexe", "is-libandexe"]
"Build a library and an executable."
IT.packageType
(\v flags -> flags { IT.packageType = v })
(noArg (Flag IT.LibraryAndExecutable))
, option [] ["tests"]
"Generate a test suite for the library."
IT.initializeTestSuite
(\v flags -> flags { IT.initializeTestSuite = v })
trueArg
, option [] ["test-dir"]
"Directory containing tests."
IT.testDirs (\v flags -> flags { IT.testDirs = v })
(reqArg' "DIR" (Just . (:[]))
(fromMaybe []))
, option [] ["simple"]
"Create a simple project with sensible defaults."
IT.simpleProject
(\v flags -> flags { IT.simpleProject = v })
trueArg
, option [] ["main-is"]
"Specify the main module."
IT.mainIs
(\v flags -> flags { IT.mainIs = v })
(reqArgFlag "FILE")
, option [] ["language"]
"Specify the default language."
IT.language
(\v flags -> flags { IT.language = v })
(reqArg "LANGUAGE" (parsecToReadE ("Cannot parse language: "++)
(toFlag `fmap` parsec))
(flagToList . fmap prettyShow))
, option ['o'] ["expose-module"]
"Export a module from the package."
IT.exposedModules
(\v flags -> flags { IT.exposedModules = v })
(reqArg "MODULE" (parsecToReadE ("Cannot parse module name: "++)
((Just . (:[])) `fmap` parsec))
(maybe [] (fmap prettyShow)))
, option [] ["extension"]
"Use a LANGUAGE extension (in the other-extensions field)."
IT.otherExts
(\v flags -> flags { IT.otherExts = v })
(reqArg "EXTENSION" (parsecToReadE ("Cannot parse extension: "++)
((Just . (:[])) `fmap` parsec))
(maybe [] (fmap prettyShow)))
, option ['d'] ["dependency"]
"Package dependency."
IT.dependencies (\v flags -> flags { IT.dependencies = v })
(reqArg "PACKAGE" (parsecToReadE ("Cannot parse dependency: "++)
((Just . (:[])) `fmap` parsec))
(maybe [] (fmap prettyShow)))
, option [] ["application-dir"]
"Directory containing package application executable."
IT.applicationDirs (\v flags -> flags { IT.applicationDirs = v})
(reqArg' "DIR" (Just . (:[]))
(fromMaybe []))
, option [] ["source-dir", "sourcedir"]
"Directory containing package library source."
IT.sourceDirs (\v flags -> flags { IT.sourceDirs = v })
(reqArg' "DIR" (Just . (:[]))
(fromMaybe []))
, option [] ["build-tool"]
"Required external build tool."
IT.buildTools (\v flags -> flags { IT.buildTools = v })
(reqArg' "TOOL" (Just . (:[]))
(fromMaybe []))
-- NB: this is a bit of a transitional hack and will likely be
-- removed again if `cabal init` is migrated to the v2-* command
-- framework
, option "w" ["with-compiler"]
"give the path to a particular compiler"
IT.initHcPath (\v flags -> flags { IT.initHcPath = v })
(reqArgFlag "PATH")
, optionVerbosity IT.initVerbosity (\v flags -> flags { IT.initVerbosity = v })
]
-- ------------------------------------------------------------
-- * Copy and Register
-- ------------------------------------------------------------
copyCommand :: CommandUI CopyFlags
copyCommand = Cabal.copyCommand
{ commandNotes = Just $ \pname ->
"Examples:\n"
++ " " ++ pname ++ " v1-copy "
++ " All the components in the package\n"
++ " " ++ pname ++ " v1-copy foo "
++ " A component (i.e. lib, exe, test suite)"
, commandUsage = usageAlternatives "v1-copy" $
[ "[FLAGS]"
, "COMPONENTS [FLAGS]"
]
}
registerCommand :: CommandUI RegisterFlags
registerCommand = Cabal.registerCommand
{ commandUsage = \pname -> "Usage: " ++ pname ++ " v1-register [FLAGS]\n" }
-- ------------------------------------------------------------
-- * ActAsSetup flags
-- ------------------------------------------------------------
data ActAsSetupFlags = ActAsSetupFlags {
actAsSetupBuildType :: Flag BuildType
} deriving Generic
defaultActAsSetupFlags :: ActAsSetupFlags
defaultActAsSetupFlags = ActAsSetupFlags {
actAsSetupBuildType = toFlag Simple
}
actAsSetupCommand :: CommandUI ActAsSetupFlags
actAsSetupCommand = CommandUI {
commandName = "act-as-setup",
commandSynopsis = "Run as-if this was a Setup.hs",
commandDescription = Nothing,
commandNotes = Nothing,
commandUsage = \pname ->
"Usage: " ++ pname ++ " act-as-setup\n",
commandDefaultFlags = defaultActAsSetupFlags,
commandOptions = \_ ->
[option "" ["build-type"]
"Use the given build type."
actAsSetupBuildType (\v flags -> flags { actAsSetupBuildType = v })
(reqArg "BUILD-TYPE" (parsecToReadE ("Cannot parse build type: "++)
(fmap toFlag parsec))
(map prettyShow . flagToList))
]
}
instance Monoid ActAsSetupFlags where
mempty = gmempty
mappend = (<>)
instance Semigroup ActAsSetupFlags where
(<>) = gmappend
-- ------------------------------------------------------------
-- * UserConfig flags
-- ------------------------------------------------------------
data UserConfigFlags = UserConfigFlags {
userConfigVerbosity :: Flag Verbosity,
userConfigForce :: Flag Bool,
userConfigAppendLines :: Flag [String]
} deriving Generic
instance Monoid UserConfigFlags where
mempty = UserConfigFlags {
userConfigVerbosity = toFlag normal,
userConfigForce = toFlag False,
userConfigAppendLines = toFlag []
}
mappend = (<>)
instance Semigroup UserConfigFlags where
(<>) = gmappend
userConfigCommand :: CommandUI UserConfigFlags
userConfigCommand = CommandUI {
commandName = "user-config",
commandSynopsis = "Display and update the user's global cabal configuration.",
commandDescription = Just $ \_ -> wrapText $
"When upgrading cabal, the set of configuration keys and their default"
++ " values may change. This command provides means to merge the existing"
++ " config in ~/.cabal/config"
++ " (i.e. all bindings that are actually defined and not commented out)"
++ " and the default config of the new version.\n"
++ "\n"
++ "init: Creates a new config file at either ~/.cabal/config or as"
++ " specified by --config-file, if given. An existing file won't be "
++ " overwritten unless -f or --force is given.\n"
++ "diff: Shows a pseudo-diff of the user's ~/.cabal/config file and"
++ " the default configuration that would be created by cabal if the"
++ " config file did not exist.\n"
++ "update: Applies the pseudo-diff to the configuration that would be"
++ " created by default, and write the result back to ~/.cabal/config.",
commandNotes = Nothing,
commandUsage = usageAlternatives "user-config" ["init", "diff", "update"],
commandDefaultFlags = mempty,
commandOptions = \ _ -> [
optionVerbosity userConfigVerbosity (\v flags -> flags { userConfigVerbosity = v })
, option ['f'] ["force"]
"Overwrite the config file if it already exists."
userConfigForce (\v flags -> flags { userConfigForce = v })
trueArg
, option ['a'] ["augment"]
"Additional setting to augment the config file (replacing a previous setting if it existed)."
userConfigAppendLines (\v flags -> flags
{userConfigAppendLines =
Flag $ concat (flagToList (userConfigAppendLines flags) ++ flagToList v)})
(reqArg' "CONFIGLINE" (Flag . (:[])) (fromMaybe [] . flagToMaybe))
]
}
-- ------------------------------------------------------------
-- * GetOpt Utils
-- ------------------------------------------------------------
reqArgFlag :: ArgPlaceHolder ->
MkOptDescr (b -> Flag String) (Flag String -> b -> b) b
reqArgFlag ad = reqArg ad (succeedReadE Flag) flagToList
liftOptions :: (b -> a) -> (a -> b -> b)
-> [OptionField a] -> [OptionField b]
liftOptions get set = map (liftOption get set)
yesNoOpt :: ShowOrParseArgs -> MkOptDescr (b -> Flag Bool) (Flag Bool -> b -> b) b
yesNoOpt ShowArgs sf lf = trueArg sf lf
yesNoOpt _ sf lf = Command.boolOpt' flagToMaybe Flag (sf, lf) ([], map ("no-" ++) lf) sf lf
optionSolver :: (flags -> Flag PreSolver)
-> (Flag PreSolver -> flags -> flags)
-> OptionField flags
optionSolver get set =
option [] ["solver"]
("Select dependency solver to use (default: " ++ prettyShow defaultSolver ++ "). Choices: " ++ allSolvers ++ ".")
get set
(reqArg "SOLVER" (parsecToReadE (const $ "solver must be one of: " ++ allSolvers)
(toFlag `fmap` parsec))
(flagToList . fmap prettyShow))
optionSolverFlags :: ShowOrParseArgs
-> (flags -> Flag Int ) -> (Flag Int -> flags -> flags)
-> (flags -> Flag ReorderGoals) -> (Flag ReorderGoals -> flags -> flags)
-> (flags -> Flag CountConflicts) -> (Flag CountConflicts -> flags -> flags)
-> (flags -> Flag FineGrainedConflicts) -> (Flag FineGrainedConflicts -> flags -> flags)
-> (flags -> Flag MinimizeConflictSet) -> (Flag MinimizeConflictSet -> flags -> flags)
-> (flags -> Flag IndependentGoals) -> (Flag IndependentGoals -> flags -> flags)
-> (flags -> Flag ShadowPkgs) -> (Flag ShadowPkgs -> flags -> flags)
-> (flags -> Flag StrongFlags) -> (Flag StrongFlags -> flags -> flags)
-> (flags -> Flag AllowBootLibInstalls) -> (Flag AllowBootLibInstalls -> flags -> flags)
-> (flags -> Flag OnlyConstrained) -> (Flag OnlyConstrained -> flags -> flags)
-> [OptionField flags]
optionSolverFlags showOrParseArgs getmbj setmbj getrg setrg getcc setcc
getfgc setfgc getmc setmc getig setig getsip setsip
getstrfl setstrfl getib setib getoc setoc =
[ option [] ["max-backjumps"]
("Maximum number of backjumps allowed while solving (default: " ++ show defaultMaxBackjumps ++ "). Use a negative number to enable unlimited backtracking. Use 0 to disable backtracking completely.")
getmbj setmbj
(reqArg "NUM" (parsecToReadE ("Cannot parse number: "++) (fmap toFlag P.signedIntegral))
(map show . flagToList))
, option [] ["reorder-goals"]
"Try to reorder goals according to certain heuristics. Slows things down on average, but may make backtracking faster for some packages."
(fmap asBool . getrg)
(setrg . fmap ReorderGoals)
(yesNoOpt showOrParseArgs)
, option [] ["count-conflicts"]
"Try to speed up solving by preferring goals that are involved in a lot of conflicts (default)."
(fmap asBool . getcc)
(setcc . fmap CountConflicts)
(yesNoOpt showOrParseArgs)
, option [] ["fine-grained-conflicts"]
"Skip a version of a package if it does not resolve the conflicts encountered in the last version, as a solver optimization (default)."
(fmap asBool . getfgc)
(setfgc . fmap FineGrainedConflicts)
(yesNoOpt showOrParseArgs)
, option [] ["minimize-conflict-set"]
("When there is no solution, try to improve the error message by finding "
++ "a minimal conflict set (default: false). May increase run time "
++ "significantly.")
(fmap asBool . getmc)
(setmc . fmap MinimizeConflictSet)
(yesNoOpt showOrParseArgs)
, option [] ["independent-goals"]
"Treat several goals on the command line as independent. If several goals depend on the same package, different versions can be chosen."
(fmap asBool . getig)
(setig . fmap IndependentGoals)
(yesNoOpt showOrParseArgs)
, option [] ["shadow-installed-packages"]
"If multiple package instances of the same version are installed, treat all but one as shadowed."
(fmap asBool . getsip)
(setsip . fmap ShadowPkgs)
(yesNoOpt showOrParseArgs)
, option [] ["strong-flags"]
"Do not defer flag choices (this used to be the default in cabal-install <= 1.20)."
(fmap asBool . getstrfl)
(setstrfl . fmap StrongFlags)
(yesNoOpt showOrParseArgs)
, option [] ["allow-boot-library-installs"]
"Allow cabal to install base, ghc-prim, integer-simple, integer-gmp, and template-haskell."
(fmap asBool . getib)
(setib . fmap AllowBootLibInstalls)
(yesNoOpt showOrParseArgs)
, option [] ["reject-unconstrained-dependencies"]
"Require these packages to have constraints on them if they are to be selected (default: none)."
getoc
setoc
(reqArg "none|all"
(parsecToReadE
(const "reject-unconstrained-dependencies must be 'none' or 'all'")
(toFlag `fmap` parsec))
(flagToList . fmap prettyShow))
]
usagePackages :: String -> String -> String
usagePackages name pname =
"Usage: " ++ pname ++ " " ++ name ++ " [PACKAGES]\n"
usageFlags :: String -> String -> String
usageFlags name pname =
"Usage: " ++ pname ++ " " ++ name ++ " [FLAGS]\n"
-- ------------------------------------------------------------
-- * Repo helpers
-- ------------------------------------------------------------
showRemoteRepo :: RemoteRepo -> String
showRemoteRepo = prettyShow
readRemoteRepo :: String -> Maybe RemoteRepo
readRemoteRepo = simpleParsec
showLocalRepo :: LocalRepo -> String
showLocalRepo = prettyShow
readLocalRepo :: String -> Maybe LocalRepo
readLocalRepo = simpleParsec
-- ------------------------------------------------------------
-- * Helpers for Documentation
-- ------------------------------------------------------------
relevantConfigValuesText :: [String] -> String
relevantConfigValuesText vs =
"Relevant global configuration keys:\n"
++ concat [" " ++ v ++ "\n" |v <- vs]