cabal-install-3.14.1.0: src/Distribution/Client/ProjectOrchestration.hs
{-# LANGUAGE CPP #-}
{-# LANGUAGE NamedFieldPuns #-}
{-# LANGUAGE RankNTypes #-}
{-# LANGUAGE RecordWildCards #-}
{-# LANGUAGE ScopedTypeVariables #-}
{-# LANGUAGE ViewPatterns #-}
-- | This module deals with building and incrementally rebuilding a collection
-- of packages. It is what backs the @cabal build@ and @configure@ commands,
-- as well as being a core part of @run@, @test@, @bench@ and others.
--
-- The primary thing is in fact rebuilding (and trying to make that quick by
-- not redoing unnecessary work), so building from scratch is just a special
-- case.
--
-- The build process and the code can be understood by breaking it down into
-- three major parts:
--
-- * The 'ElaboratedInstallPlan' type
--
-- * The \"what to do\" phase, where we look at the all input configuration
-- (project files, .cabal files, command line etc) and produce a detailed
-- plan of what to do -- the 'ElaboratedInstallPlan'.
--
-- * The \"do it\" phase, where we take the 'ElaboratedInstallPlan' and we
-- re-execute it.
--
-- As far as possible, the \"what to do\" phase embodies all the policy, leaving
-- the \"do it\" phase policy free. The first phase contains more of the
-- complicated logic, but it is contained in code that is either pure or just
-- has read effects (except cache updates). Then the second phase does all the
-- actions to build packages, but as far as possible it just follows the
-- instructions and avoids any logic for deciding what to do (apart from
-- recompilation avoidance in executing the plan).
--
-- This division helps us keep the code under control, making it easier to
-- understand, test and debug. So when you are extending these modules, please
-- think about which parts of your change belong in which part. It is
-- perfectly ok to extend the description of what to do (i.e. the
-- 'ElaboratedInstallPlan') if that helps keep the policy decisions in the
-- first phase. Also, the second phase does not have direct access to any of
-- the input configuration anyway; all the information has to flow via the
-- 'ElaboratedInstallPlan'.
module Distribution.Client.ProjectOrchestration
( -- * Discovery phase: what is in the project?
CurrentCommand (..)
, establishProjectBaseContext
, establishProjectBaseContextWithRoot
, ProjectBaseContext (..)
, BuildTimeSettings (..)
, commandLineFlagsToProjectConfig
-- * Pre-build phase: decide what to do.
, withInstallPlan
, runProjectPreBuildPhase
, ProjectBuildContext (..)
-- ** Selecting what targets we mean
, readTargetSelectors
, reportTargetSelectorProblems
, resolveTargets
, TargetsMap
, allTargetSelectors
, uniqueTargetSelectors
, TargetSelector (..)
, TargetImplicitCwd (..)
, PackageId
, AvailableTarget (..)
, AvailableTargetStatus (..)
, TargetRequested (..)
, ComponentName (..)
, ComponentKind (..)
, ComponentTarget (..)
, SubComponentTarget (..)
, selectComponentTargetBasic
, distinctTargetComponents
-- ** Utils for selecting targets
, filterTargetsKind
, filterTargetsKindWith
, selectBuildableTargets
, selectBuildableTargetsWith
, selectBuildableTargets'
, selectBuildableTargetsWith'
, forgetTargetsDetail
-- ** Adjusting the plan
, pruneInstallPlanToTargets
, TargetAction (..)
, pruneInstallPlanToDependencies
, CannotPruneDependencies (..)
, printPlan
-- * Build phase: now do it.
, runProjectBuildPhase
-- * Post build actions
, runProjectPostBuildPhase
, dieOnBuildFailures
-- * Dummy projects
, establishDummyProjectBaseContext
, establishDummyDistDirLayout
) where
import Distribution.Client.Compat.Prelude
import Distribution.Compat.Directory
( makeAbsolute
)
import Prelude ()
import Distribution.Client.ProjectBuilding
import Distribution.Client.ProjectConfig
import Distribution.Client.ProjectPlanOutput
import Distribution.Client.ProjectPlanning hiding
( pruneInstallPlanToTargets
)
import qualified Distribution.Client.ProjectPlanning as ProjectPlanning
( pruneInstallPlanToTargets
)
import Distribution.Client.ProjectPlanning.Types
import Distribution.Client.DistDirLayout
import qualified Distribution.Client.InstallPlan as InstallPlan
import Distribution.Client.TargetProblem
( TargetProblem (..)
)
import Distribution.Client.TargetSelector
( ComponentKind (..)
, TargetImplicitCwd (..)
, TargetSelector (..)
, componentKind
, readTargetSelectors
, reportTargetSelectorProblems
)
import Distribution.Client.Types
( DocsResult (..)
, GenericReadyPackage (..)
, PackageLocation (..)
, PackageSpecifier (..)
, SourcePackageDb (..)
, TestsResult (..)
, UnresolvedSourcePackage
, WriteGhcEnvironmentFilesPolicy (..)
)
import Distribution.Solver.Types.PackageIndex
( lookupPackageName
)
import Distribution.Client.BuildReports.Anonymous (cabalInstallID)
import qualified Distribution.Client.BuildReports.Anonymous as BuildReports
import qualified Distribution.Client.BuildReports.Storage as BuildReports
( storeLocal
)
import Distribution.Client.HttpUtils
import Distribution.Client.Setup hiding (packageName)
import Distribution.Compiler
( CompilerFlavor (GHC)
)
import Distribution.Types.ComponentName
( componentNameString
)
import Distribution.Types.InstalledPackageInfo
( InstalledPackageInfo
)
import Distribution.Types.UnqualComponentName
( UnqualComponentName
, packageNameToUnqualComponentName
)
import Distribution.Solver.Types.OptionalStanza
import Control.Exception (assert)
import qualified Data.List.NonEmpty as NE
import qualified Data.Map as Map
import qualified Data.Set as Set
import Distribution.Client.Errors
import Distribution.Package
import Distribution.Simple.Command (commandShowOptions)
import Distribution.Simple.Compiler
( OptimisationLevel (..)
, compilerCompatVersion
, compilerId
, compilerInfo
, showCompilerId
)
import Distribution.Simple.Configure (computeEffectiveProfiling)
import Distribution.Simple.Flag
( flagToMaybe
, fromFlagOrDefault
)
import Distribution.Simple.LocalBuildInfo
( ComponentName (..)
, pkgComponents
)
import Distribution.Simple.PackageIndex (InstalledPackageIndex)
import qualified Distribution.Simple.Setup as Setup
import Distribution.Simple.Utils
( createDirectoryIfMissingVerbose
, debugNoWrap
, dieWithException
, notice
, noticeNoWrap
, ordNub
, warn
)
import Distribution.System
( Platform (Platform)
)
import Distribution.Types.Flag
( FlagAssignment
, diffFlagAssignment
, showFlagAssignment
)
import Distribution.Utils.NubList
( fromNubList
)
import Distribution.Utils.Path (makeSymbolicPath)
import Distribution.Verbosity
import Distribution.Version
( mkVersion
)
#ifdef MIN_VERSION_unix
import System.Posix.Signals (sigKILL, sigSEGV)
#endif
-- | Tracks what command is being executed, because we need to hide this somewhere
-- for cases that need special handling (usually for error reporting).
data CurrentCommand = InstallCommand | HaddockCommand | BuildCommand | ReplCommand | OtherCommand
deriving (Show, Eq)
-- | This holds the context of a project prior to solving: the content of the
-- @cabal.project@, @cabal/config@ and all the local package @.cabal@ files.
data ProjectBaseContext = ProjectBaseContext
{ distDirLayout :: DistDirLayout
, cabalDirLayout :: CabalDirLayout
, projectConfig :: ProjectConfig
, localPackages :: [PackageSpecifier UnresolvedSourcePackage]
-- ^ Note: these are all the packages mentioned in the project configuration.
-- Whether or not they will be considered local to the project will be decided
-- by `shouldBeLocal` in ProjectPlanning.
, buildSettings :: BuildTimeSettings
, currentCommand :: CurrentCommand
, installedPackages :: Maybe InstalledPackageIndex
}
establishProjectBaseContext
:: Verbosity
-> ProjectConfig
-> CurrentCommand
-> IO ProjectBaseContext
establishProjectBaseContext verbosity cliConfig currentCommand = do
projectRoot <- either throwIO return =<< findProjectRoot verbosity mprojectDir mprojectFile
establishProjectBaseContextWithRoot verbosity cliConfig projectRoot currentCommand
where
mprojectDir = Setup.flagToMaybe projectConfigProjectDir
mprojectFile = Setup.flagToMaybe projectConfigProjectFile
ProjectConfigShared{projectConfigProjectDir, projectConfigProjectFile} = projectConfigShared cliConfig
-- | Like 'establishProjectBaseContext' but doesn't search for project root.
establishProjectBaseContextWithRoot
:: Verbosity
-> ProjectConfig
-> ProjectRoot
-> CurrentCommand
-> IO ProjectBaseContext
establishProjectBaseContextWithRoot verbosity cliConfig projectRoot currentCommand = do
let haddockOutputDir = flagToMaybe (packageConfigHaddockOutputDir (projectConfigLocalPackages cliConfig))
let distDirLayout = defaultDistDirLayout projectRoot mdistDirectory haddockOutputDir
httpTransport <-
configureTransport
verbosity
(fromNubList . projectConfigProgPathExtra $ projectConfigShared cliConfig)
(flagToMaybe . projectConfigHttpTransport $ projectConfigBuildOnly cliConfig)
(projectConfig, localPackages) <-
rebuildProjectConfig
verbosity
httpTransport
distDirLayout
cliConfig
let ProjectConfigBuildOnly
{ projectConfigLogsDir
} = projectConfigBuildOnly projectConfig
ProjectConfigShared
{ projectConfigStoreDir
} = projectConfigShared projectConfig
mlogsDir = Setup.flagToMaybe projectConfigLogsDir
mstoreDir <-
sequenceA $
makeAbsolute
<$> Setup.flagToMaybe projectConfigStoreDir
cabalDirLayout <- mkCabalDirLayout mstoreDir mlogsDir
let buildSettings =
resolveBuildTimeSettings
verbosity
cabalDirLayout
projectConfig
-- https://github.com/haskell/cabal/issues/6013
when (null (projectPackages projectConfig) && null (projectPackagesOptional projectConfig)) $
warn verbosity "There are no packages or optional-packages in the project"
return
ProjectBaseContext
{ distDirLayout
, cabalDirLayout
, projectConfig
, localPackages
, buildSettings
, currentCommand
, installedPackages
}
where
mdistDirectory = Setup.flagToMaybe projectConfigDistDir
ProjectConfigShared{projectConfigDistDir} = projectConfigShared cliConfig
installedPackages = Nothing
-- | This holds the context between the pre-build, build and post-build phases.
data ProjectBuildContext = ProjectBuildContext
{ elaboratedPlanOriginal :: ElaboratedInstallPlan
-- ^ This is the improved plan, before we select a plan subset based on
-- the build targets, and before we do the dry-run. So this contains
-- all packages in the project.
, elaboratedPlanToExecute :: ElaboratedInstallPlan
-- ^ This is the 'elaboratedPlanOriginal' after we select a plan subset
-- and do the dry-run phase to find out what is up-to or out-of date.
-- This is the plan that will be executed during the build phase. So
-- this contains only a subset of packages in the project.
, elaboratedShared :: ElaboratedSharedConfig
-- ^ The part of the install plan that's shared between all packages in
-- the plan. This does not change between the two plan variants above,
-- so there is just the one copy.
, pkgsBuildStatus :: BuildStatusMap
-- ^ The result of the dry-run phase. This tells us about each member of
-- the 'elaboratedPlanToExecute'.
, targetsMap :: TargetsMap
-- ^ The targets selected by @selectPlanSubset@. This is useful eg. in
-- CmdRun, where we need a valid target to execute.
}
-- | Pre-build phase: decide what to do.
withInstallPlan
:: Verbosity
-> ProjectBaseContext
-> (ElaboratedInstallPlan -> ElaboratedSharedConfig -> IO a)
-> IO a
withInstallPlan
verbosity
ProjectBaseContext
{ distDirLayout
, cabalDirLayout
, projectConfig
, localPackages
, installedPackages
}
action = do
-- Take the project configuration and make a plan for how to build
-- everything in the project. This is independent of any specific targets
-- the user has asked for.
--
(elaboratedPlan, _, elaboratedShared, _, _) <-
rebuildInstallPlan
verbosity
distDirLayout
cabalDirLayout
projectConfig
localPackages
installedPackages
action elaboratedPlan elaboratedShared
runProjectPreBuildPhase
:: Verbosity
-> ProjectBaseContext
-> (ElaboratedInstallPlan -> IO (ElaboratedInstallPlan, TargetsMap))
-> IO ProjectBuildContext
runProjectPreBuildPhase
verbosity
ProjectBaseContext
{ distDirLayout
, cabalDirLayout
, projectConfig
, localPackages
, installedPackages
}
selectPlanSubset = do
-- Take the project configuration and make a plan for how to build
-- everything in the project. This is independent of any specific targets
-- the user has asked for.
--
(elaboratedPlan, _, elaboratedShared, _, _) <-
rebuildInstallPlan
verbosity
distDirLayout
cabalDirLayout
projectConfig
localPackages
installedPackages
-- The plan for what to do is represented by an 'ElaboratedInstallPlan'
-- Now given the specific targets the user has asked for, decide
-- which bits of the plan we will want to execute.
--
(elaboratedPlan', targets) <- selectPlanSubset elaboratedPlan
-- Check which packages need rebuilding.
-- This also gives us more accurate reasons for the --dry-run output.
--
pkgsBuildStatus <-
rebuildTargetsDryRun
distDirLayout
elaboratedShared
elaboratedPlan'
-- Improve the plan by marking up-to-date packages as installed.
--
let elaboratedPlan'' =
improveInstallPlanWithUpToDatePackages
pkgsBuildStatus
elaboratedPlan'
debugNoWrap verbosity (InstallPlan.showInstallPlan elaboratedPlan'')
return
ProjectBuildContext
{ elaboratedPlanOriginal = elaboratedPlan
, elaboratedPlanToExecute = elaboratedPlan''
, elaboratedShared
, pkgsBuildStatus
, targetsMap = targets
}
-- | Build phase: now do it.
--
-- Execute all or parts of the description of what to do to build or
-- rebuild the various packages needed.
runProjectBuildPhase
:: Verbosity
-> ProjectBaseContext
-> ProjectBuildContext
-> IO BuildOutcomes
runProjectBuildPhase _ ProjectBaseContext{buildSettings} _
| buildSettingDryRun buildSettings =
return Map.empty
runProjectBuildPhase
verbosity
ProjectBaseContext{..}
ProjectBuildContext{..} =
fmap (Map.union (previousBuildOutcomes pkgsBuildStatus)) $
rebuildTargets
verbosity
projectConfig
distDirLayout
(cabalStoreDirLayout cabalDirLayout)
elaboratedPlanToExecute
elaboratedShared
pkgsBuildStatus
buildSettings
where
previousBuildOutcomes :: BuildStatusMap -> BuildOutcomes
previousBuildOutcomes =
Map.mapMaybe $ \status -> case status of
BuildStatusUpToDate buildSuccess -> Just (Right buildSuccess)
-- TODO: [nice to have] record build failures persistently
_ -> Nothing
-- | Post-build phase: various administrative tasks
--
-- Update bits of state based on the build outcomes and report any failures.
runProjectPostBuildPhase
:: Verbosity
-> ProjectBaseContext
-> ProjectBuildContext
-> BuildOutcomes
-> IO ()
runProjectPostBuildPhase _ ProjectBaseContext{buildSettings} _ _
| buildSettingDryRun buildSettings =
return ()
runProjectPostBuildPhase
verbosity
ProjectBaseContext{..}
bc@ProjectBuildContext{..}
buildOutcomes = do
-- Update other build artefacts
-- TODO: currently none, but could include:
-- - bin symlinks/wrappers
-- - haddock/hoogle/ctags indexes
-- - delete stale lib registrations
-- - delete stale package dirs
postBuildStatus <-
updatePostBuildProjectStatus
verbosity
distDirLayout
elaboratedPlanOriginal
pkgsBuildStatus
buildOutcomes
-- Write the .ghc.environment file (if allowed by the env file write policy).
let writeGhcEnvFilesPolicy =
projectConfigWriteGhcEnvironmentFilesPolicy . projectConfigShared $
projectConfig
shouldWriteGhcEnvironment :: Bool
shouldWriteGhcEnvironment =
case fromFlagOrDefault
NeverWriteGhcEnvironmentFiles
writeGhcEnvFilesPolicy of
AlwaysWriteGhcEnvironmentFiles -> True
NeverWriteGhcEnvironmentFiles -> False
WriteGhcEnvironmentFilesOnlyForGhc844AndNewer ->
let compiler = pkgConfigCompiler elaboratedShared
ghcCompatVersion = compilerCompatVersion GHC compiler
in maybe False (>= mkVersion [8, 4, 4]) ghcCompatVersion
when shouldWriteGhcEnvironment $
void $
writePlanGhcEnvironment
(distProjectRootDirectory distDirLayout)
elaboratedPlanOriginal
elaboratedShared
postBuildStatus
-- Write the build reports
writeBuildReports buildSettings bc elaboratedPlanToExecute buildOutcomes
-- Finally if there were any build failures then report them and throw
-- an exception to terminate the program
dieOnBuildFailures verbosity currentCommand elaboratedPlanToExecute buildOutcomes
-- Note that it is a deliberate design choice that the 'buildTargets' is
-- not passed to phase 1, and the various bits of input config is not
-- passed to phase 2.
--
-- We make the install plan without looking at the particular targets the
-- user asks us to build. The set of available things we can build is
-- discovered from the env and config and is used to make the install plan.
-- The targets just tell us which parts of the install plan to execute.
--
-- Conversely, executing the plan does not directly depend on any of the
-- input config. The bits that are needed (or better, the decisions based
-- on it) all go into the install plan.
-- Notionally, the 'BuildFlags' should be things that do not affect what
-- we build, just how we do it. These ones of course do
------------------------------------------------------------------------------
-- Taking targets into account, selecting what to build
--
-- | The set of components to build, represented as a mapping from 'UnitId's
-- to the 'ComponentTarget's within the unit that will be selected
-- (e.g. selected to build, test or repl).
--
-- Associated with each 'ComponentTarget' is the set of 'TargetSelector's that
-- matched this target. Typically this is exactly one, but in general it is
-- possible to for different selectors to match the same target. This extra
-- information is primarily to help make helpful error messages.
type TargetsMap = Map UnitId [(ComponentTarget, NonEmpty TargetSelector)]
-- | Get all target selectors.
allTargetSelectors :: TargetsMap -> [TargetSelector]
allTargetSelectors = concatMap (NE.toList . snd) . concat . Map.elems
-- | Get all unique target selectors.
uniqueTargetSelectors :: TargetsMap -> [TargetSelector]
uniqueTargetSelectors = ordNub . allTargetSelectors
-- | Given a set of 'TargetSelector's, resolve which 'UnitId's and
-- 'ComponentTarget's they ought to refer to.
--
-- The idea is that every user target identifies one or more roots in the
-- 'ElaboratedInstallPlan', which we will use to determine the closure
-- of what packages need to be built, dropping everything from the plan
-- that is unnecessary. This closure and pruning is done by
-- 'pruneInstallPlanToTargets' and this needs to be told the roots in terms
-- of 'UnitId's and the 'ComponentTarget's within those.
--
-- This means we first need to translate the 'TargetSelector's into the
-- 'UnitId's and 'ComponentTarget's. This translation has to be different for
-- the different command line commands, like @build@, @repl@ etc. For example
-- the command @build pkgfoo@ could select a different set of components in
-- pkgfoo than @repl pkgfoo@. The @build@ command would select any library and
-- all executables, whereas @repl@ would select the library or a single
-- executable. Furthermore, both of these examples could fail, and fail in
-- different ways and each needs to be able to produce helpful error messages.
--
-- So 'resolveTargets' takes two helpers: one to select the targets to be used
-- by user targets that refer to a whole package ('TargetPackage'), and
-- another to check user targets that refer to a component (or a module or
-- file within a component). These helpers can fail, and use their own error
-- type. Both helpers get given the 'AvailableTarget' info about the
-- component(s).
--
-- While commands vary quite a bit in their behaviour about which components to
-- select for a whole-package target, most commands have the same behaviour for
-- checking a user target that refers to a specific component. To help with
-- this commands can use 'selectComponentTargetBasic', either directly or as
-- a basis for their own @selectComponentTarget@ implementation.
resolveTargets
:: forall err
. ( forall k
. TargetSelector
-> [AvailableTarget k]
-> Either (TargetProblem err) [k]
)
-> ( forall k
. SubComponentTarget
-> AvailableTarget k
-> Either (TargetProblem err) k
)
-> ElaboratedInstallPlan
-> Maybe (SourcePackageDb)
-> [TargetSelector]
-> Either [TargetProblem err] TargetsMap
resolveTargets
selectPackageTargets
selectComponentTarget
installPlan
mPkgDb =
fmap mkTargetsMap
. either (Left . toList) Right
. checkErrors
. map (\ts -> (,) ts <$> checkTarget ts)
where
mkTargetsMap
:: [(TargetSelector, [(UnitId, ComponentTarget)])]
-> TargetsMap
mkTargetsMap targets =
Map.map nubComponentTargets $
Map.fromListWith
(<>)
[ (uid, [(ct, ts)])
| (ts, cts) <- targets
, (uid, ct) <- cts
]
AvailableTargetIndexes{..} = availableTargetIndexes installPlan
checkTarget :: TargetSelector -> Either (TargetProblem err) [(UnitId, ComponentTarget)]
-- We can ask to build any whole package, project-local or a dependency
checkTarget bt@(TargetPackage _ (ordNub -> [pkgid]) mkfilter)
| Just ats <-
fmap (maybe id filterTargetsKind mkfilter) $
Map.lookup pkgid availableTargetsByPackageId =
fmap (componentTargets WholeComponent) $
selectPackageTargets bt ats
| otherwise =
Left (TargetProblemNoSuchPackage pkgid)
checkTarget (TargetPackage _ pkgids _) =
error
( "TODO: add support for multiple packages in a directory. Got\n"
++ unlines (map prettyShow pkgids)
)
-- For the moment this error cannot happen here, because it gets
-- detected when the package config is being constructed. This case
-- will need handling properly when we do add support.
--
-- TODO: how should this use case play together with the
-- '--cabal-file' option of 'configure' which allows using multiple
-- .cabal files for a single package?
checkTarget bt@(TargetAllPackages mkfilter) =
fmap (componentTargets WholeComponent)
. selectPackageTargets bt
. maybe id filterTargetsKind mkfilter
. filter availableTargetLocalToProject
$ concat (Map.elems availableTargetsByPackageId)
checkTarget (TargetComponent pkgid cname subtarget)
| Just ats <-
Map.lookup
(pkgid, cname)
availableTargetsByPackageIdAndComponentName =
fmap (componentTargets subtarget) $
selectComponentTargets subtarget ats
| Map.member pkgid availableTargetsByPackageId =
Left (TargetProblemNoSuchComponent pkgid cname)
| otherwise =
Left (TargetProblemNoSuchPackage pkgid)
checkTarget (TargetComponentUnknown pkgname ecname subtarget)
| Just ats <- case ecname of
Left ucname ->
Map.lookup
(pkgname, ucname)
availableTargetsByPackageNameAndUnqualComponentName
Right cname ->
Map.lookup
(pkgname, cname)
availableTargetsByPackageNameAndComponentName =
fmap (componentTargets subtarget) $
selectComponentTargets subtarget ats
| Map.member pkgname availableTargetsByPackageName =
Left (TargetProblemUnknownComponent pkgname ecname)
| otherwise =
Left (TargetNotInProject pkgname)
checkTarget bt@(TargetPackageNamed pkgname mkfilter)
| Just ats <-
fmap (maybe id filterTargetsKind mkfilter) $
Map.lookup pkgname availableTargetsByPackageName =
fmap (componentTargets WholeComponent)
. selectPackageTargets bt
$ ats
| Just SourcePackageDb{packageIndex} <- mPkgDb
, let pkg = lookupPackageName packageIndex pkgname
, not (null pkg) =
Left (TargetAvailableInIndex pkgname)
| otherwise =
Left (TargetNotInProject pkgname)
componentTargets
:: SubComponentTarget
-> [(b, ComponentName)]
-> [(b, ComponentTarget)]
componentTargets subtarget =
map (fmap (\cname -> ComponentTarget cname subtarget))
selectComponentTargets
:: SubComponentTarget
-> [AvailableTarget k]
-> Either (TargetProblem err) [k]
selectComponentTargets subtarget =
either (Left . NE.head) Right
. checkErrors
. map (selectComponentTarget subtarget)
checkErrors :: [Either e a] -> Either (NonEmpty e) [a]
checkErrors =
(\(es, xs) -> case es of [] -> Right xs; (e : es') -> Left (e :| es'))
. partitionEithers
data AvailableTargetIndexes = AvailableTargetIndexes
{ availableTargetsByPackageIdAndComponentName
:: AvailableTargetsMap (PackageId, ComponentName)
, availableTargetsByPackageId
:: AvailableTargetsMap PackageId
, availableTargetsByPackageName
:: AvailableTargetsMap PackageName
, availableTargetsByPackageNameAndComponentName
:: AvailableTargetsMap (PackageName, ComponentName)
, availableTargetsByPackageNameAndUnqualComponentName
:: AvailableTargetsMap (PackageName, UnqualComponentName)
}
type AvailableTargetsMap k = Map k [AvailableTarget (UnitId, ComponentName)]
-- We define a bunch of indexes to help 'resolveTargets' with resolving
-- 'TargetSelector's to specific 'UnitId's.
--
-- They are all derived from the 'availableTargets' index.
-- The 'availableTargetsByPackageIdAndComponentName' is just that main index,
-- while the others are derived by re-grouping on the index key.
--
-- They are all constructed lazily because they are not necessarily all used.
--
availableTargetIndexes :: ElaboratedInstallPlan -> AvailableTargetIndexes
availableTargetIndexes installPlan = AvailableTargetIndexes{..}
where
availableTargetsByPackageIdAndComponentName
:: Map
(PackageId, ComponentName)
[AvailableTarget (UnitId, ComponentName)]
availableTargetsByPackageIdAndComponentName =
availableTargets installPlan
availableTargetsByPackageId
:: Map PackageId [AvailableTarget (UnitId, ComponentName)]
availableTargetsByPackageId =
Map.mapKeysWith
(++)
(\(pkgid, _cname) -> pkgid)
availableTargetsByPackageIdAndComponentName
`Map.union` availableTargetsEmptyPackages
availableTargetsByPackageName
:: Map PackageName [AvailableTarget (UnitId, ComponentName)]
availableTargetsByPackageName =
Map.mapKeysWith
(++)
packageName
availableTargetsByPackageId
availableTargetsByPackageNameAndComponentName
:: Map
(PackageName, ComponentName)
[AvailableTarget (UnitId, ComponentName)]
availableTargetsByPackageNameAndComponentName =
Map.mapKeysWith
(++)
(\(pkgid, cname) -> (packageName pkgid, cname))
availableTargetsByPackageIdAndComponentName
availableTargetsByPackageNameAndUnqualComponentName
:: Map
(PackageName, UnqualComponentName)
[AvailableTarget (UnitId, ComponentName)]
availableTargetsByPackageNameAndUnqualComponentName =
Map.mapKeysWith
(++)
( \(pkgid, cname) ->
let pname = packageName pkgid
cname' = unqualComponentName pname cname
in (pname, cname')
)
availableTargetsByPackageIdAndComponentName
where
unqualComponentName
:: PackageName -> ComponentName -> UnqualComponentName
unqualComponentName pkgname =
fromMaybe (packageNameToUnqualComponentName pkgname)
. componentNameString
-- Add in all the empty packages. These do not appear in the
-- availableTargetsByComponent map, since that only contains
-- components, so packages with no components are invisible from
-- that perspective. The empty packages need to be there for
-- proper error reporting, so users can select the empty package
-- and then we can report that it is empty, otherwise we falsely
-- report there is no such package at all.
availableTargetsEmptyPackages =
Map.fromList
[ (packageId pkg, [])
| InstallPlan.Configured pkg <- InstallPlan.toList installPlan
, case elabPkgOrComp pkg of
ElabComponent _ -> False
ElabPackage _ -> null (pkgComponents (elabPkgDescription pkg))
]
-- TODO: [research required] what if the solution has multiple
-- versions of this package?
-- e.g. due to setup deps or due to multiple independent sets
-- of packages being built (e.g. ghc + ghcjs in a project)
filterTargetsKind :: ComponentKind -> [AvailableTarget k] -> [AvailableTarget k]
filterTargetsKind ckind = filterTargetsKindWith (== ckind)
filterTargetsKindWith
:: (ComponentKind -> Bool)
-> [AvailableTarget k]
-> [AvailableTarget k]
filterTargetsKindWith p ts =
[ t | t@(AvailableTarget _ cname _ _) <- ts, p (componentKind cname)
]
selectBuildableTargets :: [AvailableTarget k] -> [k]
selectBuildableTargets = selectBuildableTargetsWith (const True)
zipBuildableTargetsWith
:: (TargetRequested -> Bool)
-> [AvailableTarget k]
-> [(k, AvailableTarget k)]
zipBuildableTargetsWith p ts =
[(k, t) | t@(AvailableTarget _ _ (TargetBuildable k req) _) <- ts, p req]
selectBuildableTargetsWith
:: (TargetRequested -> Bool)
-> [AvailableTarget k]
-> [k]
selectBuildableTargetsWith p = map fst . zipBuildableTargetsWith p
selectBuildableTargets' :: [AvailableTarget k] -> ([k], [AvailableTarget ()])
selectBuildableTargets' = selectBuildableTargetsWith' (const True)
selectBuildableTargetsWith'
:: (TargetRequested -> Bool)
-> [AvailableTarget k]
-> ([k], [AvailableTarget ()])
selectBuildableTargetsWith' p =
(fmap . map) forgetTargetDetail . unzip . zipBuildableTargetsWith p
forgetTargetDetail :: AvailableTarget k -> AvailableTarget ()
forgetTargetDetail = fmap (const ())
forgetTargetsDetail :: [AvailableTarget k] -> [AvailableTarget ()]
forgetTargetsDetail = map forgetTargetDetail
-- | A basic @selectComponentTarget@ implementation to use or pass to
-- 'resolveTargets', that does the basic checks that the component is
-- buildable and isn't a test suite or benchmark that is disabled. This
-- can also be used to do these basic checks as part of a custom impl that
selectComponentTargetBasic
:: SubComponentTarget
-> AvailableTarget k
-> Either (TargetProblem a) k
selectComponentTargetBasic
subtarget
AvailableTarget
{ availableTargetPackageId = pkgid
, availableTargetComponentName = cname
, availableTargetStatus
} =
case availableTargetStatus of
TargetDisabledByUser ->
Left (TargetOptionalStanzaDisabledByUser pkgid cname subtarget)
TargetDisabledBySolver ->
Left (TargetOptionalStanzaDisabledBySolver pkgid cname subtarget)
TargetNotLocal ->
Left (TargetComponentNotProjectLocal pkgid cname subtarget)
TargetNotBuildable ->
Left (TargetComponentNotBuildable pkgid cname subtarget)
TargetBuildable targetKey _ ->
Right targetKey
-- | Wrapper around 'ProjectPlanning.pruneInstallPlanToTargets' that adjusts
-- for the extra unneeded info in the 'TargetsMap'.
pruneInstallPlanToTargets
:: TargetAction
-> TargetsMap
-> ElaboratedInstallPlan
-> ElaboratedInstallPlan
pruneInstallPlanToTargets targetActionType targetsMap elaboratedPlan =
assert (Map.size targetsMap > 0) $
ProjectPlanning.pruneInstallPlanToTargets
targetActionType
(Map.map (map fst) targetsMap)
elaboratedPlan
-- | Utility used by repl and run to check if the targets spans multiple
-- components, since those commands do not support multiple components.
distinctTargetComponents :: TargetsMap -> Set.Set (UnitId, ComponentName)
distinctTargetComponents targetsMap =
Set.fromList
[ (uid, cname)
| (uid, cts) <- Map.toList targetsMap
, (ComponentTarget cname _, _) <- cts
]
------------------------------------------------------------------------------
-- Displaying what we plan to do
--
-- | Print a user-oriented presentation of the install plan, indicating what
-- will be built.
printPlan
:: Verbosity
-> ProjectBaseContext
-> ProjectBuildContext
-> IO ()
printPlan
verbosity
ProjectBaseContext
{ buildSettings = BuildTimeSettings{buildSettingDryRun}
, projectConfig =
ProjectConfig
{ projectConfigAllPackages =
PackageConfig{packageConfigOptimization = globalOptimization}
, projectConfigLocalPackages =
PackageConfig{packageConfigOptimization = localOptimization}
}
, currentCommand
}
ProjectBuildContext
{ elaboratedPlanToExecute = elaboratedPlan
, elaboratedShared
, pkgsBuildStatus
}
| null pkgs && currentCommand == BuildCommand =
notice verbosity "Up to date"
| not (null pkgs) =
noticeNoWrap verbosity $
unlines $
( showBuildProfile
++ "In order, the following "
++ wouldWill
++ " be built"
++ ifNormal " (use -v for more details)"
++ ":"
)
: map showPkgAndReason pkgs
| otherwise = return ()
where
pkgs = InstallPlan.executionOrder elaboratedPlan
ifVerbose s
| verbosity >= verbose = s
| otherwise = ""
ifNormal s
| verbosity >= verbose = ""
| otherwise = s
wouldWill
| buildSettingDryRun = "would"
| otherwise = "will"
showPkgAndReason :: ElaboratedReadyPackage -> String
showPkgAndReason (ReadyPackage elab) =
unwords $
filter (not . null) $
[ " -"
, if verbosity >= deafening
then prettyShow (installedUnitId elab)
else prettyShow (packageId elab)
, case elabBuildStyle elab of
BuildInplaceOnly InMemory -> "(interactive)"
_ -> ""
, case elabPkgOrComp elab of
ElabPackage pkg -> showTargets elab ++ ifVerbose (showStanzas (pkgStanzasEnabled pkg))
ElabComponent comp ->
"(" ++ showComp elab comp ++ ")"
, showFlagAssignment (nonDefaultFlags elab)
, showConfigureFlags elab
, let buildStatus = pkgsBuildStatus Map.! installedUnitId elab
in "(" ++ showBuildStatus buildStatus ++ ")"
]
showComp :: ElaboratedConfiguredPackage -> ElaboratedComponent -> String
showComp elab comp =
maybe "custom" prettyShow (compComponentName comp)
++ if Map.null (elabInstantiatedWith elab)
then ""
else
" with "
++ intercalate
", "
-- TODO: Abbreviate the UnitIds
[ prettyShow k ++ "=" ++ prettyShow v
| (k, v) <- Map.toList (elabInstantiatedWith elab)
]
nonDefaultFlags :: ElaboratedConfiguredPackage -> FlagAssignment
nonDefaultFlags elab =
elabFlagAssignment elab `diffFlagAssignment` elabFlagDefaults elab
showTargets :: ElaboratedConfiguredPackage -> String
showTargets elab
| null (elabBuildTargets elab) = ""
| otherwise =
"("
++ intercalate
", "
[ showComponentTarget (packageId elab) t
| t <- elabBuildTargets elab
]
++ ")"
showConfigureFlags :: ElaboratedConfiguredPackage -> String
showConfigureFlags elab =
let commonFlags =
setupHsCommonFlags
verbosity
Nothing -- omit working directory
(makeSymbolicPath "$builddir")
fullConfigureFlags =
runIdentity $
( setupHsConfigureFlags
(\_ -> return (error "unused"))
elaboratedPlan
(ReadyPackage elab)
elaboratedShared
commonFlags
)
-- \| Given a default value @x@ for a flag, nub @Flag x@
-- into @NoFlag@. This gives us a tidier command line
-- rendering.
nubFlag :: Eq a => a -> Setup.Flag a -> Setup.Flag a
nubFlag x (Setup.Flag x') | x == x' = Setup.NoFlag
nubFlag _ f = f
(tryLibProfiling, tryLibProfilingShared, tryExeProfiling) =
computeEffectiveProfiling fullConfigureFlags
partialConfigureFlags =
mempty
{ configProf =
nubFlag False (configProf fullConfigureFlags)
, configProfExe =
nubFlag tryExeProfiling (configProfExe fullConfigureFlags)
, configProfLib =
nubFlag tryLibProfiling (configProfLib fullConfigureFlags)
, configProfShared =
nubFlag tryLibProfilingShared (configProfShared fullConfigureFlags)
}
in -- Not necessary to "escape" it, it's just for user output
unwords . ("" :) $
commandShowOptions
(Setup.configureCommand (pkgConfigCompilerProgs elaboratedShared))
partialConfigureFlags
showBuildStatus :: BuildStatus -> String
showBuildStatus status = case status of
BuildStatusPreExisting -> "existing package"
BuildStatusInstalled -> "already installed"
BuildStatusDownload{} -> "requires download & build"
BuildStatusUnpack{} -> "requires build"
BuildStatusRebuild _ rebuild -> case rebuild of
BuildStatusConfigure
(MonitoredValueChanged _) -> "configuration changed"
BuildStatusConfigure mreason -> showMonitorChangedReason mreason
BuildStatusBuild _ buildreason -> case buildreason of
BuildReasonDepsRebuilt -> "dependency rebuilt"
BuildReasonFilesChanged
mreason -> showMonitorChangedReason mreason
BuildReasonExtraTargets _ -> "additional components to build"
BuildReasonEphemeralTargets -> "ephemeral targets"
BuildStatusUpToDate{} -> "up to date" -- doesn't happen
showMonitorChangedReason :: MonitorChangedReason a -> String
showMonitorChangedReason (MonitoredFileChanged file) =
"file " ++ file ++ " changed"
showMonitorChangedReason (MonitoredValueChanged _) = "value changed"
showMonitorChangedReason MonitorFirstRun = "first run"
showMonitorChangedReason MonitorCorruptCache =
"cannot read state cache"
showBuildProfile :: String
showBuildProfile =
"Build profile: "
++ unwords
[ "-w " ++ (showCompilerId . pkgConfigCompiler) elaboratedShared
, "-O"
++ ( case globalOptimization <> localOptimization of -- if local is not set, read global
Setup.Flag NoOptimisation -> "0"
Setup.Flag NormalOptimisation -> "1"
Setup.Flag MaximumOptimisation -> "2"
Setup.NoFlag -> "1"
)
]
++ "\n"
writeBuildReports :: BuildTimeSettings -> ProjectBuildContext -> ElaboratedInstallPlan -> BuildOutcomes -> IO ()
writeBuildReports settings buildContext plan buildOutcomes = do
let plat@(Platform arch os) = pkgConfigPlatform . elaboratedShared $ buildContext
comp = pkgConfigCompiler . elaboratedShared $ buildContext
getRepo (RepoTarballPackage r _ _) = Just r
getRepo _ = Nothing
fromPlanPackage (InstallPlan.Configured pkg) (Just result) =
let installOutcome = case result of
Left bf -> case buildFailureReason bf of
GracefulFailure _ -> BuildReports.PlanningFailed
DependentFailed p -> BuildReports.DependencyFailed p
DownloadFailed _ -> BuildReports.DownloadFailed
UnpackFailed _ -> BuildReports.UnpackFailed
ConfigureFailed _ -> BuildReports.ConfigureFailed
BuildFailed _ -> BuildReports.BuildFailed
TestsFailed _ -> BuildReports.TestsFailed
InstallFailed _ -> BuildReports.InstallFailed
ReplFailed _ -> BuildReports.InstallOk
HaddocksFailed _ -> BuildReports.InstallOk
BenchFailed _ -> BuildReports.InstallOk
Right _br -> BuildReports.InstallOk
docsOutcome = case result of
Left bf -> case buildFailureReason bf of
HaddocksFailed _ -> BuildReports.Failed
_ -> BuildReports.NotTried
Right br -> case buildResultDocs br of
DocsNotTried -> BuildReports.NotTried
DocsFailed -> BuildReports.Failed
DocsOk -> BuildReports.Ok
testsOutcome = case result of
Left bf -> case buildFailureReason bf of
TestsFailed _ -> BuildReports.Failed
_ -> BuildReports.NotTried
Right br -> case buildResultTests br of
TestsNotTried -> BuildReports.NotTried
TestsOk -> BuildReports.Ok
in Just $ (BuildReports.BuildReport (packageId pkg) os arch (compilerId comp) cabalInstallID (elabFlagAssignment pkg) (map (packageId . fst) $ elabLibDependencies pkg) installOutcome docsOutcome testsOutcome, getRepo . elabPkgSourceLocation $ pkg) -- TODO handle failure log files?
fromPlanPackage _ _ = Nothing
buildReports = mapMaybe (\x -> fromPlanPackage x (InstallPlan.lookupBuildOutcome x buildOutcomes)) $ InstallPlan.toList plan
BuildReports.storeLocal
(compilerInfo comp)
(buildSettingSummaryFile settings)
buildReports
plat
-- Note this doesn't handle the anonymous build reports set by buildSettingBuildReports but those appear to not be used or missed from v1
-- The usage pattern appears to be that rather than rely on flags to cabal to send build logs to the right place and package them with reports, etc, it is easier to simply capture its output to an appropriate handle.
-- | If there are build failures then report them and throw an exception.
dieOnBuildFailures
:: Verbosity
-> CurrentCommand
-> ElaboratedInstallPlan
-> BuildOutcomes
-> IO ()
dieOnBuildFailures verbosity currentCommand plan buildOutcomes
| null failures = return ()
| isSimpleCase = exitFailure
| otherwise = do
-- For failures where we have a build log, print the log plus a header
sequence_
[ do
notice verbosity $
'\n'
: renderFailureDetail False pkg reason
++ "\nBuild log ( "
++ logfile
++ " ):"
readFile logfile >>= noticeNoWrap verbosity
| (pkg, ShowBuildSummaryAndLog reason logfile) <-
failuresClassification
]
-- For all failures, print either a short summary (if we showed the
-- build log) or all details
dieIfNotHaddockFailure verbosity $
unlines
[ case failureClassification of
ShowBuildSummaryAndLog reason _
| verbosity > normal ->
renderFailureDetail mentionDepOf pkg reason
| otherwise ->
renderFailureSummary mentionDepOf pkg reason
++ ". See the build log above for details."
ShowBuildSummaryOnly reason ->
renderFailureDetail mentionDepOf pkg reason
| let mentionDepOf = verbosity <= normal
, (pkg, failureClassification) <- failuresClassification
]
where
failures :: [(UnitId, BuildFailure)]
failures =
[ (pkgid, failure)
| (pkgid, Left failure) <- Map.toList buildOutcomes
]
failuresClassification :: [(ElaboratedConfiguredPackage, BuildFailurePresentation)]
failuresClassification =
[ (pkg, classifyBuildFailure failure)
| (pkgid, failure) <- failures
, case buildFailureReason failure of
DependentFailed{} -> verbosity > normal
_ -> True
, InstallPlan.Configured pkg <-
maybeToList (InstallPlan.lookup plan pkgid)
]
dieIfNotHaddockFailure :: Verbosity -> String -> IO ()
dieIfNotHaddockFailure verb str
| currentCommand == HaddockCommand = dieWithException verb $ DieIfNotHaddockFailureException str
| all isHaddockFailure failuresClassification = warn verb str
| otherwise = dieWithException verb $ DieIfNotHaddockFailureException str
where
isHaddockFailure
(_, ShowBuildSummaryOnly (HaddocksFailed _)) = True
isHaddockFailure
(_, ShowBuildSummaryAndLog (HaddocksFailed _) _) = True
isHaddockFailure
_ = False
classifyBuildFailure :: BuildFailure -> BuildFailurePresentation
classifyBuildFailure
BuildFailure
{ buildFailureReason = reason
, buildFailureLogFile = mlogfile
} =
maybe
(ShowBuildSummaryOnly reason)
(ShowBuildSummaryAndLog reason)
$ do
logfile <- mlogfile
e <- buildFailureException reason
ExitFailure 1 <- fromException e
return logfile
-- Special case: we don't want to report anything complicated in the case
-- of just doing build on the current package, since it's clear from
-- context which package failed.
--
-- We generalise this rule as follows:
-- - if only one failure occurs, and it is in a single root
-- package (i.e. a package with nothing else depending on it)
-- - and that failure is of a kind that always reports enough
-- detail itself (e.g. ghc reporting errors on stdout)
-- - then we do not report additional error detail or context.
--
isSimpleCase :: Bool
isSimpleCase
| [(pkgid, failure)] <- failures
, [pkg] <- rootpkgs
, installedUnitId pkg == pkgid
, isFailureSelfExplanatory (buildFailureReason failure)
, currentCommand `notElem` [InstallCommand, BuildCommand, ReplCommand] =
True
| otherwise =
False
-- NB: if the Setup script segfaulted or was interrupted,
-- we should give more detailed information. So only
-- assume that exit code 1 is "pedestrian failure."
isFailureSelfExplanatory :: BuildFailureReason -> Bool
isFailureSelfExplanatory (BuildFailed e)
| Just (ExitFailure 1) <- fromException e = True
isFailureSelfExplanatory (ConfigureFailed e)
| Just (ExitFailure 1) <- fromException e = True
isFailureSelfExplanatory _ = False
rootpkgs :: [ElaboratedConfiguredPackage]
rootpkgs =
[ pkg
| InstallPlan.Configured pkg <- InstallPlan.toList plan
, hasNoDependents pkg
]
ultimateDeps
:: UnitId
-> [InstallPlan.GenericPlanPackage InstalledPackageInfo ElaboratedConfiguredPackage]
ultimateDeps pkgid =
filter
(\pkg -> hasNoDependents pkg && installedUnitId pkg /= pkgid)
(InstallPlan.reverseDependencyClosure plan [pkgid])
hasNoDependents :: HasUnitId pkg => pkg -> Bool
hasNoDependents = null . InstallPlan.revDirectDeps plan . installedUnitId
renderFailureDetail :: Bool -> ElaboratedConfiguredPackage -> BuildFailureReason -> String
renderFailureDetail mentionDepOf pkg reason =
renderFailureSummary mentionDepOf pkg reason
++ "."
++ renderFailureExtraDetail reason
++ maybe "" showException (buildFailureException reason)
renderFailureSummary :: Bool -> ElaboratedConfiguredPackage -> BuildFailureReason -> String
renderFailureSummary mentionDepOf pkg reason =
case reason of
DownloadFailed _ -> "Failed to download " ++ pkgstr
UnpackFailed _ -> "Failed to unpack " ++ pkgstr
ConfigureFailed _ -> "Failed to build " ++ pkgstr
BuildFailed _ -> "Failed to build " ++ pkgstr
ReplFailed _ -> "repl failed for " ++ pkgstr
HaddocksFailed _ -> "Failed to build documentation for " ++ pkgstr
TestsFailed _ -> "Tests failed for " ++ pkgstr
BenchFailed _ -> "Benchmarks failed for " ++ pkgstr
InstallFailed _ -> "Failed to build " ++ pkgstr
GracefulFailure msg -> msg
DependentFailed depid ->
"Failed to build "
++ prettyShow (packageId pkg)
++ " because it depends on "
++ prettyShow depid
++ " which itself failed to build"
where
pkgstr =
elabConfiguredName verbosity pkg
++ if mentionDepOf
then renderDependencyOf (installedUnitId pkg)
else ""
renderFailureExtraDetail :: BuildFailureReason -> String
renderFailureExtraDetail (ConfigureFailed _) =
" The failure occurred during the configure step."
renderFailureExtraDetail (InstallFailed _) =
" The failure occurred during the final install step."
renderFailureExtraDetail _ =
""
renderDependencyOf :: UnitId -> String
renderDependencyOf pkgid =
case ultimateDeps pkgid of
[] -> ""
(p1 : []) ->
" (which is required by " ++ elabPlanPackageName verbosity p1 ++ ")"
(p1 : p2 : []) ->
" (which is required by "
++ elabPlanPackageName verbosity p1
++ " and "
++ elabPlanPackageName verbosity p2
++ ")"
(p1 : p2 : _) ->
" (which is required by "
++ elabPlanPackageName verbosity p1
++ ", "
++ elabPlanPackageName verbosity p2
++ " and others)"
showException e = case fromException e of
Just (ExitFailure 1) -> ""
{- FOURMOLU_DISABLE -}
#ifdef MIN_VERSION_unix
-- Note [Positive "signal" exit code]
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- What's the business with the test for negative and positive
-- signal values? The API for process specifies that if the
-- process died due to a signal, it returns a *negative* exit
-- code. So that's the negative test.
--
-- What about the positive test? Well, when we find out that
-- a process died due to a signal, we ourselves exit with that
-- exit code. However, we don't "kill ourselves" with the
-- signal; we just exit with the same code as the signal: thus
-- the caller sees a *positive* exit code. So that's what
-- happens when we get a positive exit code.
Just (ExitFailure n)
| -n == fromIntegral sigSEGV ->
" The build process segfaulted (i.e. SIGSEGV)."
| n == fromIntegral sigSEGV ->
" The build process terminated with exit code " ++ show n
++ " which may be because some part of it segfaulted. (i.e. SIGSEGV)."
| -n == fromIntegral sigKILL ->
" The build process was killed (i.e. SIGKILL). " ++ explanation
| n == fromIntegral sigKILL ->
" The build process terminated with exit code " ++ show n
++ " which may be because some part of it was killed "
++ "(i.e. SIGKILL). " ++ explanation
where
explanation =
"The typical reason for this is that there is not "
++ "enough memory available (e.g. the OS killed a process "
++ "using lots of memory)."
#endif
Just (ExitFailure n) ->
" The build process terminated with exit code " ++ show n
_ -> " The exception was:\n "
++ displayException e
buildFailureException :: BuildFailureReason -> Maybe SomeException
buildFailureException reason =
case reason of
DownloadFailed e -> Just e
UnpackFailed e -> Just e
ConfigureFailed e -> Just e
BuildFailed e -> Just e
ReplFailed e -> Just e
HaddocksFailed e -> Just e
TestsFailed e -> Just e
BenchFailed e -> Just e
InstallFailed e -> Just e
GracefulFailure _ -> Nothing
DependentFailed _ -> Nothing
{- FOURMOLU_ENABLE -}
data BuildFailurePresentation
= ShowBuildSummaryOnly BuildFailureReason
| ShowBuildSummaryAndLog BuildFailureReason FilePath
-------------------------------------------------------------------------------
-- Dummy projects
-------------------------------------------------------------------------------
-- | Create a dummy project context, without a .cabal or a .cabal.project file
-- (a place where to put a temporary dist directory is still needed)
establishDummyProjectBaseContext
:: Verbosity
-> ProjectConfig
-- ^ Project configuration including the global config if needed
-> DistDirLayout
-- ^ Where to put the dist directory
-> [PackageSpecifier UnresolvedSourcePackage]
-- ^ The packages to be included in the project
-> CurrentCommand
-> IO ProjectBaseContext
establishDummyProjectBaseContext verbosity projectConfig distDirLayout localPackages currentCommand = do
let ProjectConfigBuildOnly
{ projectConfigLogsDir
} = projectConfigBuildOnly projectConfig
ProjectConfigShared
{ projectConfigStoreDir
} = projectConfigShared projectConfig
mlogsDir = flagToMaybe projectConfigLogsDir
mstoreDir = flagToMaybe projectConfigStoreDir
cabalDirLayout <- mkCabalDirLayout mstoreDir mlogsDir
let buildSettings :: BuildTimeSettings
buildSettings =
resolveBuildTimeSettings
verbosity
cabalDirLayout
projectConfig
installedPackages = Nothing
return
ProjectBaseContext
{ distDirLayout
, cabalDirLayout
, projectConfig
, localPackages
, buildSettings
, currentCommand
, installedPackages
}
establishDummyDistDirLayout :: Verbosity -> ProjectConfig -> FilePath -> IO DistDirLayout
establishDummyDistDirLayout verbosity cliConfig tmpDir = do
let distDirLayout = defaultDistDirLayout projectRoot mdistDirectory Nothing
-- Create the dist directories
createDirectoryIfMissingVerbose verbosity True $ distDirectory distDirLayout
createDirectoryIfMissingVerbose verbosity True $ distProjectCacheDirectory distDirLayout
return distDirLayout
where
mdistDirectory =
flagToMaybe $
projectConfigDistDir $
projectConfigShared cliConfig
projectRoot = ProjectRootImplicit tmpDir