diff --git a/cbits/common/my_landlock.h b/cbits/common/my_landlock.h --- a/cbits/common/my_landlock.h +++ b/cbits/common/my_landlock.h @@ -24,6 +24,29 @@ #include +// In case we are being compiled against an old , +// provide fallbacks for handled_access_fs flags that were added in +// Landlock ABI versions 2, 3, 5, and 9. This way we need fewer #ifdefs +// later on and, more importantly, these flags are then supported if +// the program is run under a kernel that supports a newer Landlock ABI +// than the current . +// +// NOTE: There are no fallbacks for ABI 4 and 6 features because they +// require an extended struct landlock_ruleset_attr. +#ifndef LANDLOCK_ACCESS_FS_REFER +# define LANDLOCK_ACCESS_FS_REFER (1ULL << 13) +#endif +#ifndef LANDLOCK_ACCESS_FS_TRUNCATE +# define LANDLOCK_ACCESS_FS_TRUNCATE (1ULL << 14) +#endif +#ifndef LANDLOCK_ACCESS_FS_IOCTL_DEV +# define LANDLOCK_ACCESS_FS_IOCTL_DEV (1ULL << 15) +#endif +#ifndef LANDLOCK_ACCESS_FS_RESOLVE_UNIX +# define LANDLOCK_ACCESS_FS_RESOLVE_UNIX (1ULL << 16) +#endif + + /// \brief Initialize Landlock ruleset attributes to forbid everything /// /// The supported Landlock ABI is checked at runtime and only the supported @@ -87,15 +110,10 @@ | LANDLOCK_ACCESS_FS_MAKE_FIFO | LANDLOCK_ACCESS_FS_MAKE_BLOCK | LANDLOCK_ACCESS_FS_MAKE_SYM -#ifdef LANDLOCK_ACCESS_FS_REFER | LANDLOCK_ACCESS_FS_REFER // ABI 2 -#endif -#ifdef LANDLOCK_ACCESS_FS_TRUNCATE | LANDLOCK_ACCESS_FS_TRUNCATE // ABI 3 -#endif -#ifdef LANDLOCK_ACCESS_FS_IOCTL_DEV | LANDLOCK_ACCESS_FS_IOCTL_DEV // ABI 5 -#endif + | LANDLOCK_ACCESS_FS_RESOLVE_UNIX // ABI 9 ; #ifdef LANDLOCK_ACCESS_NET_BIND_TCP @@ -115,15 +133,11 @@ // Disable flags that require a new ABI version. switch (abi_version) { case 1: -#ifdef LANDLOCK_ACCESS_FS_REFER attr->handled_access_fs &= ~LANDLOCK_ACCESS_FS_REFER; -#endif FALLTHROUGH; case 2: -#ifdef LANDLOCK_ACCESS_FS_TRUNCATE attr->handled_access_fs &= ~LANDLOCK_ACCESS_FS_TRUNCATE; -#endif FALLTHROUGH; case 3: @@ -133,9 +147,7 @@ FALLTHROUGH; case 4: -#ifdef LANDLOCK_ACCESS_FS_IOCTL_DEV attr->handled_access_fs &= ~LANDLOCK_ACCESS_FS_IOCTL_DEV; -#endif FALLTHROUGH; case 5: @@ -150,6 +162,11 @@ attr->scoped &= ~LANDLOCK_SCOPE_SIGNAL; #endif + FALLTHROUGH; + + case 7: + case 8: + attr->handled_access_fs &= ~LANDLOCK_ACCESS_FS_RESOLVE_UNIX; FALLTHROUGH; default: diff --git a/cbits/config.h.in b/cbits/config.h.in --- a/cbits/config.h.in +++ b/cbits/config.h.in @@ -1,4 +1,4 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ +/* cbits/config.h.in. Generated from configure.ac by autoheader. */ /* Define if building universal (internal helper macro) */ #undef AC_APPLE_UNIVERSAL_BUILD @@ -171,15 +171,9 @@ /* Define to 1 if you have the 'getopt_long' function. */ #undef HAVE_GETOPT_LONG -/* Define to 1 if you have the 'getrlimit' function. */ -#undef HAVE_GETRLIMIT - /* Define if the GNU gettext() function is already present or preinstalled. */ #undef HAVE_GETTEXT -/* Define to 1 if 'HWCAP_CRC32' is declared in . */ -#undef HAVE_HWCAP_CRC32 - /* Define if you have the iconv() function and it works. */ #undef HAVE_ICONV @@ -383,9 +377,6 @@ /* Define to 1 to disable debugging code. */ #undef NDEBUG -/* Name of package */ -#undef PACKAGE - /* Define to the address where bug reports for this package should be sent. */ #undef PACKAGE_BUGREPORT @@ -568,9 +559,6 @@ # undef _XOPEN_SOURCE #endif - -/* Version number of package */ -#undef VERSION /* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most significant byte first (like Motorola and SPARC, unlike Intel). */ diff --git a/cbits/liblzma/api/lzma/container.h b/cbits/liblzma/api/lzma/container.h --- a/cbits/liblzma/api/lzma/container.h +++ b/cbits/liblzma/api/lzma/container.h @@ -935,7 +935,10 @@ * - LZMA_MEM_ERROR * - LZMA_MEMLIMIT_ERROR: Memory usage limit was reached. * The minimum required memlimit value was stored to *memlimit. - * - LZMA_BUF_ERROR: Output buffer was too small. + * - LZMA_BUF_ERROR: Output buffer was too small. (liblzma 5.8.3 + * and older have a bug: LZMA_BUF_ERROR may be returned when + * the input seems to be truncated. The correct error code + * would be LZMA_DATA_ERROR.) * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_stream_buffer_decode( diff --git a/cbits/liblzma/api/lzma/hardware.h b/cbits/liblzma/api/lzma/hardware.h --- a/cbits/liblzma/api/lzma/hardware.h +++ b/cbits/liblzma/api/lzma/hardware.h @@ -9,10 +9,7 @@ * ways to limit the resource usage. Applications linking against liblzma * need to do the actual decisions how much resources to let liblzma to use. * To ease making these decisions, liblzma provides functions to find out - * the relevant capabilities of the underlying hardware. Currently there - * is only a function to find out the amount of RAM, but in the future there - * will be also a function to detect how many concurrent threads the system - * can run. + * the relevant capabilities of the underlying hardware. * * \note On some operating systems, these function may temporarily * load a shared library or open file descriptor(s) to find out diff --git a/cbits/liblzma/api/lzma/version.h b/cbits/liblzma/api/lzma/version.h --- a/cbits/liblzma/api/lzma/version.h +++ b/cbits/liblzma/api/lzma/version.h @@ -22,7 +22,7 @@ #define LZMA_VERSION_MINOR 8 /** \brief Patch version number of the liblzma release. */ -#define LZMA_VERSION_PATCH 3 +#define LZMA_VERSION_PATCH 4 /** * \brief Version stability marker diff --git a/cbits/liblzma/check/crc32_arm64.h b/cbits/liblzma/check/crc32_arm64.h --- a/cbits/liblzma/check/crc32_arm64.h +++ b/cbits/liblzma/check/crc32_arm64.h @@ -50,9 +50,15 @@ { crc = ~crc; - if (size >= 8) { - // Align the input buffer because this was shown to be - // significantly faster than unaligned accesses. + if (size < 8) { + while (size > 0) { + crc = __crc32b(crc, *buf++); + --size; + } + } else { + // We have at least 8 bytes of input. Align the input buffer. + // Aligned is faster than unaligned access and works also on + // strict-align targets. const size_t align = (0 - (uintptr_t)buf) & 7; if (align & 1) @@ -79,22 +85,20 @@ buf < limit; buf += 8) crc = __crc32d(crc, aligned_read64le(buf)); - size &= 7; - } + // Process the remaining 0-7 bytes. + if (size & 4) { + crc = __crc32w(crc, aligned_read32le(buf)); + buf += 4; + } - // Process the remaining bytes that are not 8 byte aligned. - if (size & 4) { - crc = __crc32w(crc, aligned_read32le(buf)); - buf += 4; - } + if (size & 2) { + crc = __crc32h(crc, aligned_read16le(buf)); + buf += 2; + } - if (size & 2) { - crc = __crc32h(crc, aligned_read16le(buf)); - buf += 2; + if (size & 1) + crc = __crc32b(crc, *buf); } - - if (size & 1) - crc = __crc32b(crc, *buf); return ~crc; } diff --git a/cbits/liblzma/check/crc32_loongarch.h b/cbits/liblzma/check/crc32_loongarch.h --- a/cbits/liblzma/check/crc32_loongarch.h +++ b/cbits/liblzma/check/crc32_loongarch.h @@ -21,7 +21,13 @@ { int32_t crc = (int32_t)~crc_unsigned; - if (size >= 8) { + if (size < 8) { + while (size > 0) { + crc = __crc_w_b_w((int8_t)*buf++, crc); + --size; + } + } else { + // We have at least 8 bytes of input. Align the input buffer. const size_t align = (0 - (uintptr_t)buf) & 7; if (align & 1) @@ -39,25 +45,25 @@ size -= align; + // Process 8 bytes at a time. for (const uint8_t *limit = buf + (size & ~(size_t)7); buf < limit; buf += 8) crc = __crc_w_d_w((int64_t)aligned_read64le(buf), crc); - size &= 7; - } + // Process the remaining 0-7 bytes. + if (size & 4) { + crc = __crc_w_w_w((int32_t)aligned_read32le(buf), crc); + buf += 4; + } - if (size & 4) { - crc = __crc_w_w_w((int32_t)aligned_read32le(buf), crc); - buf += 4; - } + if (size & 2) { + crc = __crc_w_h_w((int16_t)aligned_read16le(buf), crc); + buf += 2; + } - if (size & 2) { - crc = __crc_w_h_w((int16_t)aligned_read16le(buf), crc); - buf += 2; + if (size & 1) + crc = __crc_w_b_w((int8_t)*buf, crc); } - - if (size & 1) - crc = __crc_w_b_w((int8_t)*buf, crc); return (uint32_t)~crc; } diff --git a/cbits/liblzma/common/alone_decoder.c b/cbits/liblzma/common/alone_decoder.c --- a/cbits/liblzma/common/alone_decoder.c +++ b/cbits/liblzma/common/alone_decoder.c @@ -152,8 +152,12 @@ } }; - return_if_error(lzma_next_filter_init(&coder->next, - allocator, filters)); + const lzma_ret ret = lzma_next_filter_init(&coder->next, + allocator, filters); + if (ret != LZMA_OK) { + lzma_next_end(&coder->next, allocator); + return ret; + } coder->sequence = SEQ_CODE; break; diff --git a/cbits/liblzma/common/file_info.c b/cbits/liblzma/common/file_info.c --- a/cbits/liblzma/common/file_info.c +++ b/cbits/liblzma/common/file_info.c @@ -438,7 +438,8 @@ return_if_error(lzma_index_decoder_init( &coder->index_decoder, allocator, &coder->this_index, - coder->memlimit - memused)); + coder->memlimit - memused, + coder->footer_flags.backward_size)); coder->index_remaining = coder->footer_flags.backward_size; coder->sequence = SEQ_INDEX_DECODE; @@ -716,6 +717,13 @@ return LZMA_PROG_ERROR; } } + + // combined_index_memusage + this_index_memusage shouldn't overflow + // because combined_index_memusage is limited by how much can be + // successfully allocated, and this_index_memusage is limited by the + // input_size_max check in index_decoder.c. Check for overflow anyway. + if (UINT64_MAX - combined_index_memusage < this_index_memusage) + return LZMA_PROG_ERROR; // Now we know the total memory usage/requirement. If we had neither // old Indexes nor a new Index, this will be zero which isn't diff --git a/cbits/liblzma/common/index.c b/cbits/liblzma/common/index.c --- a/cbits/liblzma/common/index.c +++ b/cbits/liblzma/common/index.c @@ -14,6 +14,14 @@ #include "stream_flags_common.h" +/// \brief Maximum number of Streams supported in lzma_index +/// +/// The maximum number of Streams is UINT32_MAX, because index_tree.count +/// is uint32_t. This is unlikely to be reached in practice because it +/// would require allocating hundreds of gigabytes of memory. +#define STREAMS_MAX UINT32_MAX + + /// \brief How many Records to allocate at once /// /// This should be big enough to avoid making lots of tiny allocations @@ -28,12 +36,14 @@ /// \brief Base structure for index_stream and index_group structures typedef struct index_tree_node_s index_tree_node; struct index_tree_node_s { - /// Uncompressed start offset of this Stream (relative to the - /// beginning of the file) or Block (relative to the beginning - /// of the Stream) + /// Uncompressed start offset of this Stream (relative to + /// lzma_index.uncompressed_bias) or Block (relative to + /// the beginning of the Stream) lzma_vli uncompressed_base; - /// Compressed start offset of this Stream or Block + /// Compressed start offset of this Stream (relative to + /// lzma_index.compressed_bias) or Block (relative to + /// the beginning of the Stream) lzma_vli compressed_base; index_tree_node *parent; @@ -47,13 +57,10 @@ /// Root node index_tree_node *root; - /// Leftmost node. Since the tree will be filled sequentially, - /// this won't change after the first node has been added to - /// the tree. + /// Leftmost (first) node index_tree_node *leftmost; - /// The rightmost node in the tree. Since the tree is filled - /// sequentially, this is always the node where to add the new data. + /// Rightmost (last) node index_tree_node *rightmost; /// Number of nodes in the tree @@ -108,10 +115,14 @@ /// Every index_stream is a node in the tree of Streams. index_tree_node node; - /// Number of this Stream (first one is 1) + /// Number of this Stream counted in reverse: the last Stream + /// in the lzma_index has .number == 0. In the API, the first + /// Stream is 1, so the real number of this Stream is + /// lzma_index.streams.count - .number. uint32_t number; - /// Total number of Blocks before this Stream + /// Total number of Blocks before this Stream relative to + /// lzma_index.block_number_base. lzma_vli block_number_base; /// Record groups of this Stream are stored in a tree. @@ -148,6 +159,15 @@ /// are many concatenated Streams. index_tree streams; + /// In index_stream, node.uncompressed_base, node.compressed_base, + /// and block_number_base are relative to these _bias members + /// instead of being relative to 0. If a new index_stream is + /// prepended before the existing index_streams, the offsets of all + /// existing index_streams can be changed by updating these _biases. + lzma_vli uncompressed_bias; + lzma_vli compressed_bias; + lzma_vli block_number_bias; + /// Uncompressed size of all the Blocks in the Stream(s) lzma_vli uncompressed_size; @@ -226,10 +246,13 @@ /// Add a new node to the tree. node->uncompressed_base and /// node->compressed_base must have been set by the caller already. +/// +/// The tree is always filled sequentially: index_streams are prepended +/// and index_groups are appended. static void -index_tree_append(index_tree *tree, index_tree_node *node) +index_tree_append(index_tree *tree, index_tree_node *node, bool prepend) { - node->parent = tree->rightmost; + node->parent = prepend ? tree->leftmost : tree->rightmost; node->left = NULL; node->right = NULL; @@ -243,14 +266,22 @@ return; } - // The tree is always filled sequentially. - assert(tree->rightmost->uncompressed_base <= node->uncompressed_base); - assert(tree->rightmost->compressed_base < node->compressed_base); - - // Add the new node after the rightmost node. It's the correct - // place due to the reason above. - tree->rightmost->right = node; - tree->rightmost = node; + // Add the new node before the leftmost or after the rightmost node. + if (prepend) { + assert(tree->leftmost->uncompressed_base + >= node->uncompressed_base); + assert(tree->leftmost->compressed_base + > node->compressed_base); + tree->leftmost->left = node; + tree->leftmost = node; + } else { + assert(tree->rightmost->uncompressed_base + <= node->uncompressed_base); + assert(tree->rightmost->compressed_base + < node->compressed_base); + tree->rightmost->right = node; + tree->rightmost = node; + } // Balance the AVL-tree if needed. We don't need to keep the balance // factors in nodes, because we always fill the tree sequentially, @@ -265,11 +296,14 @@ node = node->parent; } while (--up > 0); - // Rotate left using node as the rotation root. - index_tree_node *pivot = node->right; + // Rotate right/left using node as the rotation root. + index_tree_node *pivot = prepend ? node->left : node->right; if (node->parent == NULL) { tree->root = pivot; + } else if (prepend) { + assert(node->parent->left == node); + node->parent->left = pivot; } else { assert(node->parent->right == node); node->parent->right = pivot; @@ -277,11 +311,20 @@ pivot->parent = node->parent; - node->right = pivot->left; - if (node->right != NULL) - node->right->parent = node; + if (prepend) { + node->left = pivot->right; + if (node->left != NULL) + node->left->parent = node; - pivot->left = node; + pivot->right = node; + } else { + node->right = pivot->left; + if (node->right != NULL) + node->right->parent = node; + + pivot->left = node; + } + node->parent = pivot; } @@ -308,6 +351,25 @@ } +/// Get the previous node in the tree. Return NULL if there are no more nodes. +static void * +index_tree_prev(const index_tree_node *node) +{ + if (node->left != NULL) { + node = node->left; + while (node->right != NULL) + node = node->right; + + return (void *)(node); + } + + while (node->parent != NULL && node->parent->left == node) + node = node->parent; + + return (void *)(node->parent); +} + + /// Locate a node that contains the given uncompressed offset. It is /// caller's job to check that target is not bigger than the uncompressed /// size of the tree (the last node would be returned in that case still). @@ -317,9 +379,6 @@ const index_tree_node *result = NULL; const index_tree_node *node = tree->root; - assert(tree->leftmost == NULL - || tree->leftmost->uncompressed_base == 0); - // Consecutive nodes may have the same uncompressed_base. // We must pick the rightmost one. while (node != NULL) { @@ -382,6 +441,9 @@ lzma_index *i = lzma_alloc(sizeof(lzma_index), allocator); if (i != NULL) { index_tree_init(&i->streams); + i->uncompressed_bias = LZMA_VLI_MAX; + i->compressed_bias = LZMA_VLI_MAX; + i->block_number_bias = LZMA_VLI_MAX; i->uncompressed_size = 0; i->total_size = 0; i->record_count = 0; @@ -401,13 +463,15 @@ if (i == NULL) return NULL; - index_stream *s = index_stream_init(0, 0, 1, 0, allocator); + index_stream *s = index_stream_init( + i->compressed_bias, i->uncompressed_bias, + 0, i->block_number_bias, allocator); if (s == NULL) { lzma_free(i, allocator); return NULL; } - index_tree_append(&i->streams, &s->node); + index_tree_append(&i->streams, &s->node, true); return i; } @@ -427,11 +491,11 @@ } -extern void +extern bool lzma_index_prealloc(lzma_index *i, lzma_vli records) { if (records > PREALLOC_MAX) - records = PREALLOC_MAX; + return true; // If index_decoder.c calls us with records == 0, it's decoding // an Index that has no Records. In that case the decoder won't call @@ -454,7 +518,7 @@ records = INDEX_GROUP_SIZE; i->prealloc = (size_t)(records); - return; + return false; } @@ -494,10 +558,8 @@ const uint64_t index_base = sizeof(lzma_index) + alloc_overhead; // Validate the arguments and catch integer overflows. - // Maximum number of Streams is "only" UINT32_MAX, because - // that limit is used by the tree containing the Streams. const uint64_t limit = UINT64_MAX - index_base; - if (streams == 0 || streams > UINT32_MAX || blocks > LZMA_VLI_MAX + if (streams == 0 || streams > STREAMS_MAX || blocks > LZMA_VLI_MAX || streams > limit / stream_base || groups > limit / group_base || limit - streams_mem < groups_mem) @@ -581,7 +643,7 @@ { const index_stream *s = (const index_stream *)(i->streams.rightmost); const index_group *g = (const index_group *)(s->groups.rightmost); - return index_file_size(s->node.compressed_base, + return index_file_size(s->node.compressed_base - i->compressed_bias, g == NULL ? 0 : g->records[g->last].unpadded_sum, s->record_count, s->index_list_size, s->stream_padding); @@ -687,7 +749,7 @@ return LZMA_DATA_ERROR; // Check that the file size will stay within limits. - if (index_file_size(s->node.compressed_base, + if (index_file_size(s->node.compressed_base - i->compressed_bias, compressed_base + unpadded_size, s->record_count + 1, s->index_list_size + index_list_size_add, s->stream_padding) == LZMA_VLI_UNKNOWN) @@ -725,7 +787,7 @@ g->number_base = s->record_count + 1; // Add the new group to the Stream. - index_tree_append(&s->groups, &g->node); + index_tree_append(&s->groups, &g->node, false); } // Add the new Record to the group. @@ -749,23 +811,11 @@ /// Structure to pass info to index_cat_helper() typedef struct { - /// Uncompressed size of the destination - lzma_vli uncompressed_size; - - /// Compressed file size of the destination - lzma_vli file_size; - - /// Same as above but for Block numbers - lzma_vli block_number_add; - - /// Number of Streams that were in the destination index before we - /// started appending new Streams from the source index. This is - /// used to fix the Stream numbering. - uint32_t stream_number_add; - - /// Destination index' Stream tree + lzma_vli uncompressed_adjust; + lzma_vli compressed_adjust; + lzma_vli block_number_adjust; + uint32_t stream_number_adjust; index_tree *streams; - } index_cat_info; @@ -778,18 +828,19 @@ index_stream *left = (index_stream *)(this->node.left); index_stream *right = (index_stream *)(this->node.right); - if (left != NULL) - index_cat_helper(info, left); - - this->node.uncompressed_base += info->uncompressed_size; - this->node.compressed_base += info->file_size; - this->number += info->stream_number_add; - this->block_number_base += info->block_number_add; - index_tree_append(info->streams, &this->node); - if (right != NULL) index_cat_helper(info, right); + // The Stream number counts in reverse, thus += instead of -=. + this->node.uncompressed_base -= info->uncompressed_adjust; + this->node.compressed_base -= info->compressed_adjust; + this->number += info->stream_number_adjust; + this->block_number_base -= info->block_number_adjust; + index_tree_append(info->streams, &this->node, true); + + if (left != NULL) + index_cat_helper(info, left); + return; } @@ -801,6 +852,11 @@ if (dest == NULL || src == NULL) return LZMA_PROG_ERROR; + // Check that we don't exceed the maximum number of Streams + // per lzma_index. + if (STREAMS_MAX - dest->streams.count < src->streams.count) + return LZMA_DATA_ERROR; + const lzma_vli dest_file_size = lzma_index_file_size(dest); // Check that we don't exceed the file size limits. @@ -870,29 +926,39 @@ } // dest->checks includes the check types of all except the last Stream - // in dest. Set the bit for the check type of the last Stream now so - // that it won't get lost when Stream(s) from src are appended to dest. - dest->checks = lzma_index_checks(dest); + // in dest. Use lzma_index_checks() to get the check type of the + // last Stream too. This needs to be done before the Streams are + // moved from dest to src. + src->checks |= lzma_index_checks(dest); - // Add all the Streams from src to dest. Update the base offsets - // of each Stream from src. + // Update the biases. + src->uncompressed_bias -= dest->uncompressed_size; + src->compressed_bias -= dest_file_size; + src->block_number_bias -= dest->record_count; + + // Prepend all the Streams from dest to src. const index_cat_info info = { - .uncompressed_size = dest->uncompressed_size, - .file_size = dest_file_size, - .stream_number_add = dest->streams.count, - .block_number_add = dest->record_count, - .streams = &dest->streams, + .uncompressed_adjust = dest->uncompressed_bias + - src->uncompressed_bias, + .compressed_adjust = dest->compressed_bias + - src->compressed_bias, + .block_number_adjust = dest->block_number_bias + - src->block_number_bias, + .stream_number_adjust = src->streams.count, + .streams = &src->streams, }; - index_cat_helper(&info, (index_stream *)(src->streams.root)); + index_cat_helper(&info, (index_stream *)(dest->streams.root)); // Update info about all the combined Streams. - dest->uncompressed_size += src->uncompressed_size; - dest->total_size += src->total_size; - dest->record_count += src->record_count; - dest->index_list_size += src->index_list_size; - dest->checks |= src->checks; + src->uncompressed_size += dest->uncompressed_size; + src->total_size += dest->total_size; + src->record_count += dest->record_count; + src->index_list_size += dest->index_list_size; - // There's nothing else left in src than the base structure. + // There's nothing else left in dest than the base structure. + // The API is defined so that dest is modified and src is freed, + // so copy src to dest and free the base struct of src. + *dest = *src; lzma_free(src, allocator); return LZMA_OK; @@ -955,7 +1021,7 @@ assert(i == destg->allocated); // Add the group to the new Stream. - index_tree_append(&dest->groups, &destg->node); + index_tree_append(&dest->groups, &destg->node, false); return dest; } @@ -970,14 +1036,18 @@ return NULL; // Copy the totals. + dest->uncompressed_bias = src->uncompressed_bias; + dest->compressed_bias = src->compressed_bias; + dest->block_number_bias = src->block_number_bias; dest->uncompressed_size = src->uncompressed_size; dest->total_size = src->total_size; dest->record_count = src->record_count; dest->index_list_size = src->index_list_size; + dest->checks = src->checks; // Copy the Streams and the groups in them. const index_stream *srcstream - = (const index_stream *)(src->streams.leftmost); + = (const index_stream *)(src->streams.rightmost); do { index_stream *deststream = index_dup_stream( srcstream, allocator); @@ -986,9 +1056,9 @@ return NULL; } - index_tree_append(&dest->streams, &deststream->node); + index_tree_append(&dest->streams, &deststream->node, true); - srcstream = index_tree_next(&srcstream->node); + srcstream = index_tree_prev(&srcstream->node); } while (srcstream != NULL); return dest; @@ -1052,11 +1122,14 @@ } // NOTE: lzma_index_iter.stream.number is lzma_vli but we use uint32_t - // internally. - iter->stream.number = stream->number; + // internally. The internal value counts in reverse (last one is 0) + // but in lzma_index_iter.stream.number the first Stream is 1. + iter->stream.number = i->streams.count - stream->number; iter->stream.block_count = stream->record_count; - iter->stream.compressed_offset = stream->node.compressed_base; - iter->stream.uncompressed_offset = stream->node.uncompressed_base; + iter->stream.compressed_offset = stream->node.compressed_base + - i->compressed_bias; + iter->stream.uncompressed_offset = stream->node.uncompressed_base + - i->uncompressed_bias; // iter->stream.flags will be NULL if the Stream Flags haven't been // set with lzma_index_stream_flags(). @@ -1085,7 +1158,7 @@ if (group != NULL) { iter->block.number_in_stream = group->number_base + record; iter->block.number_in_file = iter->block.number_in_stream - + stream->block_number_base; + + (stream->block_number_base - i->block_number_bias); iter->block.compressed_stream_offset = record == 0 ? group->node.compressed_base @@ -1250,14 +1323,21 @@ { const lzma_index *i = iter->internal[ITER_INDEX].p; + assert(i->uncompressed_size <= LZMA_VLI_MAX); + // If the target is past the end of the file, return immediately. if (i->uncompressed_size <= target) return true; + assert(target < LZMA_VLI_MAX); + // Locate the Stream containing the target offset. + // NOTE: Adding the bias can make target >= LZMA_VLI_MAX. + target += i->uncompressed_bias; const index_stream *stream = index_tree_locate(&i->streams, target); assert(stream != NULL); target -= stream->node.uncompressed_base; + assert(target < LZMA_VLI_MAX); // Locate the group containing the target offset. const index_group *group = index_tree_locate(&stream->groups, target); diff --git a/cbits/liblzma/common/index.h b/cbits/liblzma/common/index.h --- a/cbits/liblzma/common/index.h +++ b/cbits/liblzma/common/index.h @@ -38,7 +38,9 @@ /// Set for how many Records to allocate memory the next time /// lzma_index_append() needs to allocate space for a new Record. /// This is used only by the Index decoder. -extern void lzma_index_prealloc(lzma_index *i, lzma_vli records); +/// +/// \return false on success, true if records is too large (SIZE_MAX issue) +extern bool lzma_index_prealloc(lzma_index *i, lzma_vli records); /// Round the variable-length integer to the next multiple of four. diff --git a/cbits/liblzma/common/index_decoder.c b/cbits/liblzma/common/index_decoder.c --- a/cbits/liblzma/common/index_decoder.c +++ b/cbits/liblzma/common/index_decoder.c @@ -28,6 +28,10 @@ /// Memory usage limit uint64_t memlimit; + // Memory used for lzma_index once it has been allocated. + // Before that, this holds a tiny value. + uint64_t memused; + /// Target Index lzma_index *index; @@ -35,6 +39,12 @@ /// successful decoding. lzma_index **index_ptr; + /// If Number of Records contains a value higher than this, + /// the Index is immediately considered to be corrupt. + /// This prevents us from allocating a large amount of memory + /// when we know that the Index isn't big. + lzma_vli number_of_records_max; + /// Number of Records left to decode. lzma_vli count; @@ -91,19 +101,32 @@ if (ret != LZMA_STREAM_END) goto out; + // Reject Number of Records values that are clearly invalid. + if (coder->count > coder->number_of_records_max) + return LZMA_DATA_ERROR; + coder->pos = 0; coder->sequence = SEQ_MEMUSAGE; FALLTHROUGH; case SEQ_MEMUSAGE: - if (lzma_index_memusage(1, coder->count) > coder->memlimit) { + coder->memused = lzma_index_memusage(1, coder->count); + + // We sanity-checked coder->count in SEQ_COUNT, which + // guarantees that lzma_index_memusage() won't fail. + assert(coder->memused != UINT64_MAX); + + if (coder->memused > coder->memlimit) { ret = LZMA_MEMLIMIT_ERROR; goto out; } // Tell the Index handling code how many Records this // Index has to allow it to allocate memory more efficiently. - lzma_index_prealloc(coder->index, coder->count); + // If the Record count is so high that memory allocation would + // fail later, return LZMA_MEM_ERROR now. + if (lzma_index_prealloc(coder->index, coder->count)) + return LZMA_MEM_ERROR; ret = LZMA_OK; coder->sequence = coder->count == 0 @@ -230,7 +253,10 @@ { lzma_index_coder *coder = coder_ptr; - *memusage = lzma_index_memusage(1, coder->count); + // Index decoder is special in sense that the returned memusage + // doesn't include the memory usage of the decoder itself; only + // the resulting lzma_index is counted. + *memusage = coder->memused; *old_memlimit = coder->memlimit; if (new_memlimit != 0) { @@ -246,7 +272,7 @@ static lzma_ret index_decoder_reset(lzma_index_coder *coder, const lzma_allocator *allocator, - lzma_index **i, uint64_t memlimit) + lzma_index **i, uint64_t memlimit, uint64_t input_size_max) { // Remember the pointer given by the application. We will set it // to point to the decoded Index only if decoding is successful. @@ -260,10 +286,19 @@ if (coder->index == NULL) return LZMA_MEM_ERROR; + // Approximate how many Records the Index may contain at most when + // we know that the Index won't be larger than input_size_max bytes. + // Each Record must consume at least two bytes. The CRC32 etc. + // consume a few bytes too, but we don't need an exact value. + // + // file_info.c knows Backward Size and passes it to us. When we have + // no information, input_size_max equals LZMA_BACKWARD_SIZE_MAX. + coder->number_of_records_max = input_size_max / 2; + // Initialize the rest. coder->sequence = SEQ_INDICATOR; coder->memlimit = my_max(1, memlimit); - coder->count = 0; // Needs to be initialized due to _memconfig(). + coder->memused = 1; // If _memconfig() is called before SEQ_MEMUSAGE. coder->pos = 0; coder->crc32 = 0; @@ -273,7 +308,7 @@ extern lzma_ret lzma_index_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, - lzma_index **i, uint64_t memlimit) + lzma_index **i, uint64_t memlimit, uint64_t input_size_max) { lzma_next_coder_init(&lzma_index_decoder_init, next, allocator); @@ -295,7 +330,8 @@ lzma_index_end(coder->index, allocator); } - return index_decoder_reset(coder, allocator, i, memlimit); + return index_decoder_reset( + coder, allocator, i, memlimit, input_size_max); } @@ -308,7 +344,8 @@ if (i != NULL) *i = NULL; - lzma_next_strm_init(lzma_index_decoder_init, strm, i, memlimit); + lzma_next_strm_init(lzma_index_decoder_init, strm, i, memlimit, + LZMA_BACKWARD_SIZE_MAX); strm->internal->supported_actions[LZMA_RUN] = true; strm->internal->supported_actions[LZMA_FINISH] = true; @@ -334,7 +371,9 @@ // Initialize the decoder. lzma_index_coder coder; - return_if_error(index_decoder_reset(&coder, allocator, i, *memlimit)); + const uint64_t input_size_max = in_size - *in_pos; + return_if_error(index_decoder_reset(&coder, allocator, i, *memlimit, + my_min(input_size_max, LZMA_BACKWARD_SIZE_MAX))); // Store the input start position so that we can restore it in case // of an error. @@ -361,7 +400,7 @@ } else if (ret == LZMA_MEMLIMIT_ERROR) { // Tell the caller how much memory would have // been needed. - *memlimit = lzma_index_memusage(1, coder.count); + *memlimit = coder.memused; } } diff --git a/cbits/liblzma/common/index_decoder.h b/cbits/liblzma/common/index_decoder.h --- a/cbits/liblzma/common/index_decoder.h +++ b/cbits/liblzma/common/index_decoder.h @@ -18,7 +18,7 @@ extern lzma_ret lzma_index_decoder_init(lzma_next_coder *next, const lzma_allocator *allocator, - lzma_index **i, uint64_t memlimit); + lzma_index **i, uint64_t memlimit, uint64_t input_size_max); #endif diff --git a/cbits/liblzma/common/lzip_decoder.c b/cbits/liblzma/common/lzip_decoder.c --- a/cbits/liblzma/common/lzip_decoder.c +++ b/cbits/liblzma/common/lzip_decoder.c @@ -237,8 +237,12 @@ } }; - return_if_error(lzma_next_filter_init(&coder->lzma_decoder, - allocator, filters)); + const lzma_ret ret = lzma_next_filter_init( + &coder->lzma_decoder, allocator, filters); + if (ret != LZMA_OK) { + lzma_next_end(&coder->lzma_decoder, allocator); + return ret; + } coder->crc32 = 0; coder->sequence = SEQ_LZMA_STREAM; diff --git a/cbits/liblzma/common/microlzma_decoder.c b/cbits/liblzma/common/microlzma_decoder.c --- a/cbits/liblzma/common/microlzma_decoder.c +++ b/cbits/liblzma/common/microlzma_decoder.c @@ -108,8 +108,12 @@ } }; - return_if_error(lzma_next_filter_init(&coder->lzma, - allocator, filters)); + const lzma_ret ret = lzma_next_filter_init(&coder->lzma, + allocator, filters); + if (ret != LZMA_OK) { + lzma_next_end(&coder->lzma, allocator); + return ret; + } // Pass one dummy 0x00 byte to the LZMA decoder since that // is what it expects the first byte to be. diff --git a/cbits/liblzma/common/stream_buffer_decoder.c b/cbits/liblzma/common/stream_buffer_decoder.c --- a/cbits/liblzma/common/stream_buffer_decoder.c +++ b/cbits/liblzma/common/stream_buffer_decoder.c @@ -50,10 +50,6 @@ if (ret == LZMA_STREAM_END) { ret = LZMA_OK; } else { - // Something went wrong, restore the positions. - *in_pos = in_start; - *out_pos = out_start; - if (ret == LZMA_OK) { // Either the input was truncated or the // output buffer was too small. @@ -78,6 +74,10 @@ stream_decoder.coder, memlimit, &memusage, 0); } + + // Something went wrong, restore the positions. + *in_pos = in_start; + *out_pos = out_start; } } diff --git a/cbits/liblzma/common/stream_decoder_mt.c b/cbits/liblzma/common/stream_decoder_mt.c --- a/cbits/liblzma/common/stream_decoder_mt.c +++ b/cbits/liblzma/common/stream_decoder_mt.c @@ -250,13 +250,13 @@ /// Amount of compressed data in Stream Header + Blocks that have /// already been finished. /// - /// \note Use mutex. + /// \note Use mutex when worker threads might be active. uint64_t progress_in; /// Amount of uncompressed data in Blocks that have already /// been finished. /// - /// \note Use mutex. + /// \note Use mutex when worker threads might be active. uint64_t progress_out; @@ -1068,7 +1068,12 @@ const size_t in_old = *in_pos; const lzma_ret ret = decode_block_header(coder, allocator, in, in_pos, in_size); - coder->progress_in += *in_pos - in_old; + + // Worker threads may finish earlier Blocks and need to update + // coder->progress_in at the same time with us. + mythread_sync(coder->mutex) { + coder->progress_in += *in_pos - in_old; + } if (ret == LZMA_OK) { // We didn't decode the whole Block Header yet. diff --git a/cbits/liblzma/lz/lz_decoder.c b/cbits/liblzma/lz/lz_decoder.c --- a/cbits/liblzma/lz/lz_decoder.c +++ b/cbits/liblzma/lz/lz_decoder.c @@ -278,6 +278,7 @@ // Allocate and initialize the dictionary. if (coder->dict.size != alloc_size) { + coder->dict.size = 0; lzma_free(coder->dict.buf, allocator); // The LZ_DICT_EXTRA bytes at the end of the buffer aren't diff --git a/cbits/liblzma/lzma/lzma2_decoder.c b/cbits/liblzma/lzma/lzma2_decoder.c --- a/cbits/liblzma/lzma/lzma2_decoder.c +++ b/cbits/liblzma/lzma/lzma2_decoder.c @@ -165,11 +165,32 @@ // coder->compressed_size later. const size_t in_start = *in_pos; + // LZMA2 stream ends with the end marker (0x00), so there + // must be at least one byte after this chunk. Let the + // decoder read at most one byte past the end of the chunk. + // If the decoder reads the extra byte, then the input is + // corrupt. This way we won't produce (much) junk output + // from the input bytes that are past the end of this chunk. + // The extra byte makes things simpler, because we can ignore + // uncompressed size and not think about some corner cases. + // + // NOTE: It's not a security issue (information leak) to + // pass more input to the decoder than the chunk size. + // If an attacker can modify the compressed input, then the + // attacker can modify a chunk header so that it specifies + // a too large compressed size. liblzma <= 5.8.3 didn't + // have in_limit; in_size was passed to the decoder as is. + const size_t in_limit = *in_pos + my_min(in_size - *in_pos, + coder->compressed_size + 1); + // Decode from in[] to *dict. const lzma_ret ret = coder->lzma.code(coder->lzma.coder, - dict, in, in_pos, in_size); + dict, in, in_pos, in_limit); - // Validate and update coder->compressed_size. + // Validate and update coder->compressed_size. If the input + // is corrupt, let the caller still see the newly-decoded + // output even if it is (partially) corrupt. It might allow + // users to recover a small amount of useful data. const size_t in_used = *in_pos - in_start; if (in_used > coder->compressed_size) return LZMA_DATA_ERROR; diff --git a/cbits/liblzma/simple/simple_coder.c b/cbits/liblzma/simple/simple_coder.c --- a/cbits/liblzma/simple/simple_coder.c +++ b/cbits/liblzma/simple/simple_coder.c @@ -252,6 +252,17 @@ if (coder == NULL) return LZMA_MEM_ERROR; + // Allocate memory for the filter-specific data structure. + if (simple_size > 0) { + coder->simple = lzma_alloc(simple_size, allocator); + if (coder->simple == NULL) { + lzma_free(coder, allocator); + return LZMA_MEM_ERROR; + } + } else { + coder->simple = NULL; + } + next->coder = coder; next->code = &simple_code; next->end = &simple_coder_end; @@ -260,15 +271,6 @@ coder->next = LZMA_NEXT_CODER_INIT; coder->filter = filter; coder->allocated = 2 * unfiltered_max; - - // Allocate memory for filter-specific data structure. - if (simple_size > 0) { - coder->simple = lzma_alloc(simple_size, allocator); - if (coder->simple == NULL) - return LZMA_MEM_ERROR; - } else { - coder->simple = NULL; - } } if (filters[0].options != NULL) { diff --git a/configure b/configure --- a/configure +++ b/configure @@ -639,20968 +639,22263 @@ gt_needs= : ${enable_year2038:=no} ac_subst_vars='LTLIBOBJS -LIBOBJS -xz -AM_CFLAGS -COND_GNULIB_FALSE -COND_GNULIB_TRUE -COND_INTERNAL_SHA256_FALSE -COND_INTERNAL_SHA256_TRUE -localedir_c_make -localedir_c -POSUB -LTLIBINTL -LIBINTL -INTLLIBS -LTLIBICONV -LIBICONV -INTL_MACOSX_LIBS -DESIRED_LINGUAS -XGETTEXT_EXTRA_OPTIONS -MSGMERGE_FOR_MSGFMT_OPTION -MSGMERGE -XGETTEXT_015 -XGETTEXT -GMSGFMT_015 -GMSGFMT -MSGFMT -GETTEXT_MACRO_VERSION -USE_NLS -MKDIR_P -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -SET_MAKE -COND_SYMVERS_GENERIC_FALSE -COND_SYMVERS_GENERIC_TRUE -COND_SYMVERS_LINUX_FALSE -COND_SYMVERS_LINUX_TRUE -COND_SHARED_FALSE -COND_SHARED_TRUE -RC -LT_SYS_LIBRARY_PATH -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -MANIFEST_TOOL -AWK -RANLIB -STRIP -ac_ct_AR -AR -FILECMD -NM -ac_ct_DUMPBIN -DUMPBIN -LD -FGREP -EGREP -GREP -LIBTOOL -OBJDUMP -DLLTOOL -AS -COND_THREADS_FALSE -COND_THREADS_TRUE -PTHREAD_CFLAGS -PTHREAD_LIBS -PTHREAD_CXX -PTHREAD_CC -ax_pthread_config -CPP -SED -am__fastdepCCAS_FALSE -am__fastdepCCAS_TRUE -CCASDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__include -DEPDIR -am__leading_dot -CCASFLAGS -CCAS -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -LN_S -COND_DOXYGEN_FALSE -COND_DOXYGEN_TRUE -COND_DOC_FALSE -COND_DOC_TRUE -COND_LZMALINKS_FALSE -COND_LZMALINKS_TRUE -COND_LZMAINFO_FALSE -COND_LZMAINFO_TRUE -COND_LZMADEC_FALSE -COND_LZMADEC_TRUE -COND_XZDEC_FALSE -COND_XZDEC_TRUE -COND_XZ_FALSE -COND_XZ_TRUE -COND_SMALL_FALSE -COND_SMALL_TRUE -COND_ASM_X86_FALSE -COND_ASM_X86_TRUE -COND_LZIP_DECODER_FALSE -COND_LZIP_DECODER_TRUE -COND_MICROLZMA_FALSE -COND_MICROLZMA_TRUE -COND_CHECK_SHA256_FALSE -COND_CHECK_SHA256_TRUE -COND_CHECK_CRC64_FALSE -COND_CHECK_CRC64_TRUE -COND_CHECK_CRC32_FALSE -COND_CHECK_CRC32_TRUE -COND_DECODER_LZ_FALSE -COND_DECODER_LZ_TRUE -COND_ENCODER_LZ_FALSE -COND_ENCODER_LZ_TRUE -COND_FILTER_LZ_FALSE -COND_FILTER_LZ_TRUE -COND_DECODER_SIMPLE_FALSE -COND_DECODER_SIMPLE_TRUE -COND_ENCODER_SIMPLE_FALSE -COND_ENCODER_SIMPLE_TRUE -COND_FILTER_SIMPLE_FALSE -COND_FILTER_SIMPLE_TRUE -COND_DECODER_RISCV_FALSE -COND_DECODER_RISCV_TRUE -COND_ENCODER_RISCV_FALSE -COND_ENCODER_RISCV_TRUE -COND_FILTER_RISCV_FALSE -COND_FILTER_RISCV_TRUE -COND_DECODER_SPARC_FALSE -COND_DECODER_SPARC_TRUE -COND_ENCODER_SPARC_FALSE -COND_ENCODER_SPARC_TRUE -COND_FILTER_SPARC_FALSE -COND_FILTER_SPARC_TRUE -COND_DECODER_ARM64_FALSE -COND_DECODER_ARM64_TRUE -COND_ENCODER_ARM64_FALSE -COND_ENCODER_ARM64_TRUE -COND_FILTER_ARM64_FALSE -COND_FILTER_ARM64_TRUE -COND_DECODER_ARMTHUMB_FALSE -COND_DECODER_ARMTHUMB_TRUE -COND_ENCODER_ARMTHUMB_FALSE -COND_ENCODER_ARMTHUMB_TRUE -COND_FILTER_ARMTHUMB_FALSE -COND_FILTER_ARMTHUMB_TRUE -COND_DECODER_ARM_FALSE -COND_DECODER_ARM_TRUE -COND_ENCODER_ARM_FALSE -COND_ENCODER_ARM_TRUE -COND_FILTER_ARM_FALSE -COND_FILTER_ARM_TRUE -COND_DECODER_IA64_FALSE -COND_DECODER_IA64_TRUE -COND_ENCODER_IA64_FALSE -COND_ENCODER_IA64_TRUE -COND_FILTER_IA64_FALSE -COND_FILTER_IA64_TRUE -COND_DECODER_POWERPC_FALSE -COND_DECODER_POWERPC_TRUE -COND_ENCODER_POWERPC_FALSE -COND_ENCODER_POWERPC_TRUE -COND_FILTER_POWERPC_FALSE -COND_FILTER_POWERPC_TRUE -COND_DECODER_X86_FALSE -COND_DECODER_X86_TRUE -COND_ENCODER_X86_FALSE -COND_ENCODER_X86_TRUE -COND_FILTER_X86_FALSE -COND_FILTER_X86_TRUE -COND_DECODER_DELTA_FALSE -COND_DECODER_DELTA_TRUE -COND_ENCODER_DELTA_FALSE -COND_ENCODER_DELTA_TRUE -COND_FILTER_DELTA_FALSE -COND_FILTER_DELTA_TRUE -COND_DECODER_LZMA2_FALSE -COND_DECODER_LZMA2_TRUE -COND_ENCODER_LZMA2_FALSE -COND_ENCODER_LZMA2_TRUE -COND_FILTER_LZMA2_FALSE -COND_FILTER_LZMA2_TRUE -COND_DECODER_LZMA1_FALSE -COND_DECODER_LZMA1_TRUE -COND_ENCODER_LZMA1_FALSE -COND_ENCODER_LZMA1_TRUE -COND_FILTER_LZMA1_FALSE -COND_FILTER_LZMA1_TRUE -COND_MAIN_DECODER_FALSE -COND_MAIN_DECODER_TRUE -COND_MAIN_ENCODER_FALSE -COND_MAIN_ENCODER_TRUE -LN_EXEEXT -COND_W32_FALSE -COND_W32_TRUE -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -ECHO_T -ECHO_N -ECHO_C -target_alias -host_alias -build_alias -LIBS -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -runstatedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL -am__quote' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_debug -enable_encoders -enable_decoders -enable_match_finders -enable_checks -enable_external_sha256 -enable_microlzma -enable_lzip_decoder -enable_assembler -enable_clmul_crc -enable_arm64_crc32 -enable_loongarch_crc32 -enable_small -enable_threads -enable_assume_ram -enable_xz -enable_xzdec -enable_lzmadec -enable_lzmainfo -enable_lzma_links -enable_doc -enable_doxygen -enable_sandbox -enable_dependency_tracking -enable_shared -enable_static -enable_pic -with_pic -enable_fast_install -enable_aix_soname -with_aix_soname -with_gnu_ld -with_sysroot -enable_libtool_lock -enable_symbol_versions -enable_nls -enable_rpath -with_libiconv_prefix -with_libintl_prefix -enable_largefile -enable_werror -enable_year2038 -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CCAS -CCASFLAGS -CPP -LT_SYS_LIBRARY_PATH' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -runstatedir='${localstatedir}/run' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: '$ac_useropt'" - ac_useropt_orig=$ac_useropt - ac_useropt=`printf '%s\n' "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: '$ac_useropt'" - ac_useropt_orig=$ac_useropt - ac_useropt=`printf '%s\n' "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -runstatedir | --runstatedir | --runstatedi | --runstated \ - | --runstate | --runstat | --runsta | --runst | --runs \ - | --run | --ru | --r) - ac_prev=runstatedir ;; - -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ - | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ - | --run=* | --ru=* | --r=*) - runstatedir=$ac_optarg ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: '$ac_useropt'" - ac_useropt_orig=$ac_useropt - ac_useropt=`printf '%s\n' "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: '$ac_useropt'" - ac_useropt_orig=$ac_useropt - ac_useropt=`printf '%s\n' "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: '$ac_option' -Try '$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: '$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - printf '%s\n' "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - printf '%s\n' "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`printf '%s\n' $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) printf '%s\n' "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir runstatedir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: '$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -printf '%s\n' X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but 'cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -'configure' configures XZ Utils 5.8.0 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print 'checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for '--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or '..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, 'make install' will install all the files in -'$ac_default_prefix/bin', '$ac_default_prefix/lib' etc. You can specify -an installation prefix other than '$ac_default_prefix' using '--prefix', -for instance '--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/xz] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of XZ Utils 5.8.0:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-debug Enable debugging code. - --enable-encoders=LIST Comma-separated list of encoders to build. - Default=all. Available encoders: lzma1 lzma2 delta - x86 powerpc ia64 arm armthumb arm64 sparc riscv - --enable-decoders=LIST Comma-separated list of decoders to build. - Default=all. Available decoders are the same as - available encoders. - --enable-match-finders=LIST - Comma-separated list of match finders to build. - Default=all. At least one match finder is required - for encoding with the LZMA1 and LZMA2 filters. - Available match finders: hc3 hc4 bt2 bt3 bt4 - --enable-checks=LIST Comma-separated list of integrity checks to build. - Default=all. Available integrity checks: crc32 crc64 - sha256 - --enable-external-sha256 - Use SHA-256 code from the operating system. See - INSTALL for possible subtle problems. - --disable-microlzma Do not build MicroLZMA encoder and decoder. It is - needed by specific applications only, for example, - erofs-utils. - --disable-lzip-decoder Disable decompression support for .lz (lzip) files. - --disable-assembler Do not use assembler optimizations even if such - exist for the architecture. - --disable-clmul-crc Do not use carryless multiplication for CRC - calculation even if support for it is detected. - --disable-arm64-crc32 Do not use ARM64 CRC32 instructions even if support - for it is detected. - --disable-loongarch-crc32 - Do not use LoongArch CRC32 instructions even if - support for them is detected. - --enable-small Make liblzma smaller and a little slower. This is - disabled by default to optimize for speed. - --enable-threads=METHOD Supported METHODS are 'yes', 'no', 'posix', 'win95', - and 'vista'. The default is 'yes'. Using 'no' - together with --enable-small makes liblzma thread - unsafe. - --enable-assume-ram=SIZE - If and only if the real amount of RAM cannot be - determined, assume SIZE MiB. The default is 128 MiB. - This affects the default memory usage limit. - --disable-xz do not build the xz tool - --disable-xzdec do not build xzdec - --disable-lzmadec do not build lzmadec (it exists primarily for LZMA - Utils compatibility) - --disable-lzmainfo do not build lzmainfo (it exists primarily for LZMA - Utils compatibility) - --disable-lzma-links do not create symlinks for LZMA Utils compatibility - --disable-doc do not install documentation files to docdir (man - pages are still installed and, if --enable-doxygen - is used, liblzma API documentation is installed too) - --enable-doxygen generate HTML version of the liblzma API - documentation using Doxygen and install the result - to docdir - --enable-sandbox=METHOD Sandboxing METHOD can be 'auto', 'no', 'capsicum', - 'pledge', or 'landlock'. The default is 'auto' which - enables sandboxing if a supported sandboxing method - is found. - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-static[=PKGS] build static libraries [default=yes] - --enable-pic[=PKGS] try to use only PIC/non-PIC objects [default=use - both] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --enable-aix-soname=aix|svr4|both - shared library versioning (aka "SONAME") variant to - provide on AIX, [default=aix]. - --disable-libtool-lock avoid locking (might break parallel builds) - --enable-symbol-versions - Use symbol versioning for liblzma. Enabled by - default on GNU/Linux, other GNU-based systems, and - FreeBSD. - --disable-nls do not use Native Language Support - --disable-rpath do not hardcode runtime library paths - --disable-largefile omit support for large files - --enable-werror Enable -Werror to abort compilation on all compiler - warnings. - --enable-year2038 support timestamps after 2038 - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot[=DIR] Search for dependent libraries within DIR (or the - compiler's sysroot if not specified). - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib - --without-libiconv-prefix don't search for libiconv in includedir and libdir - --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib - --without-libintl-prefix don't search for libintl in includedir and libdir - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CCAS assembler compiler command (defaults to CC) - CCASFLAGS assembler compiler flags (defaults to CFLAGS) - CPP C preprocessor - LT_SYS_LIBRARY_PATH - User-defined run-time library search path. - -Use these variables to override the choices made by 'configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -XZ Utils home page: . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`printf '%s\n' "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`printf '%s\n' "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for configure.gnu first; this name is used for a wrapper for - # Metaconfig's "Configure" on case-insensitive file systems. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - printf '%s\n' "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -XZ Utils configure 5.8.0 -generated by GNU Autoconf 2.73 - -Copyright (C) 2026 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest.beam - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext -then : - ac_retval=0 -else case e in #( - e) printf '%s\n' "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 ;; -esac -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -printf %s "checking for $2... " >&6; } -if eval test \${$3+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - eval "$3=yes" -else case e in #( - e) eval "$3=no" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -eval ac_res=\$$3 - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -printf '%s\n' "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest.beam conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - } -then : - ac_retval=0 -else case e in #( - e) printf '%s\n' "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 ;; -esac -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - } -then : - ac_retval=0 -else case e in #( - e) printf '%s\n' "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 ;; -esac -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -printf %s "checking for $2... " >&6; } -if eval test \${$3+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (void); below. */ - -#include -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (void); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main (void) -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - eval "$3=yes" -else case e in #( - e) eval "$3=no" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext ;; -esac -fi -eval ac_res=\$$3 - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -printf '%s\n' "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to run conftest.$ac_ext, and return whether this succeeded. Assumes that -# executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; } -then : - ac_retval=0 -else case e in #( - e) printf '%s\n' "$as_me: program exited with status $ac_status" >&5 - printf '%s\n' "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status ;; -esac -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_type LINENO TYPE VAR INCLUDES -# ------------------------------------------- -# Tests whether TYPE exists after having included INCLUDES, setting cache -# variable VAR accordingly. -ac_fn_c_check_type () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -printf %s "checking for $2... " >&6; } -if eval test \${$3+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) eval "$3=no" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main (void) -{ -if (sizeof ($2)) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main (void) -{ -if (sizeof (($2))) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - -else case e in #( - e) eval "$3=yes" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -eval ac_res=\$$3 - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -printf '%s\n' "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_type - -# ac_fn_c_find_uintX_t LINENO BITS VAR -# ------------------------------------ -# Finds an unsigned integer type with width BITS, setting cache variable VAR -# accordingly. -ac_fn_c_find_uintX_t () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5 -printf %s "checking for uint$2_t... " >&6; } -if eval test \${$3+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) eval "$3=no" - # Order is important - never check a type that is potentially smaller - # than half of the expected target width. - for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \ - 'unsigned long long int' 'unsigned short int' 'unsigned char'; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main (void) -{ -static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - case $ac_type in #( - uint$2_t) : - eval "$3=yes" ;; #( - *) : - eval "$3=\$ac_type" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - if eval test \"x\$"$3"\" = x"no" -then : - -else case e in #( - e) break ;; -esac -fi - done ;; -esac -fi -eval ac_res=\$$3 - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -printf '%s\n' "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_find_uintX_t - -# ac_fn_c_find_intX_t LINENO BITS VAR -# ----------------------------------- -# Finds a signed integer type with width BITS, setting cache variable VAR -# accordingly. -ac_fn_c_find_intX_t () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5 -printf %s "checking for int$2_t... " >&6; } -if eval test \${$3+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) eval "$3=no" - # Order is important - never check a type that is potentially smaller - # than half of the expected target width. - for ac_type in int$2_t 'int' 'long int' \ - 'long long int' 'short int' 'signed char'; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default - enum { N = $2 / 2 - 1 }; -int -main (void) -{ -static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default - enum { N = $2 / 2 - 1 }; -int -main (void) -{ -static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1) - < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - -else case e in #( - e) case $ac_type in #( - int$2_t) : - eval "$3=yes" ;; #( - *) : - eval "$3=\$ac_type" ;; -esac ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - if eval test \"x\$"$3"\" = x"no" -then : - -else case e in #( - e) break ;; -esac -fi - done ;; -esac -fi -eval ac_res=\$$3 - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -printf '%s\n' "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_find_intX_t - -# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES -# -------------------------------------------- -# Tries to find the compile-time value of EXPR in a program that includes -# INCLUDES, setting VAR accordingly. Returns whether the value could be -# computed -ac_fn_c_compute_int () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main (void) -{ -static int test_array [1 - 2 * !(($2) >= 0)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_lo=0 ac_mid=0 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main (void) -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_hi=$ac_mid; break -else case e in #( - e) as_fn_arith $ac_mid + 1 && ac_lo=$as_val - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - done -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main (void) -{ -static int test_array [1 - 2 * !(($2) < 0)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_hi=-1 ac_mid=-1 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main (void) -{ -static int test_array [1 - 2 * !(($2) >= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_lo=$ac_mid; break -else case e in #( - e) as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - done -else case e in #( - e) ac_lo= ac_hi= ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main (void) -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_hi=$ac_mid -else case e in #( - e) as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext -done -case $ac_lo in #(( -?*) eval "$3=\$ac_lo"; ac_retval=0 ;; -'') ac_retval=1 ;; -esac - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -static long int longval (void) { return $2; } -static unsigned long int ulongval (void) { return $2; } -#include -#include -int -main (void) -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (($2) < 0) - { - long int i = longval (); - if (i != ($2)) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ($2)) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO" -then : - echo >>conftest.val; read $3 &5 -printf %s "checking for $2.$3... " >&6; } -if eval test \${$4+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$5 -int -main (void) -{ -static $2 ac_aggr; -if (ac_aggr.$3) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - eval "$4=yes" -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$5 -int -main (void) -{ -static $2 ac_aggr; -if (sizeof ac_aggr.$3) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - eval "$4=yes" -else case e in #( - e) eval "$4=no" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -eval ac_res=\$$4 - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -printf '%s\n' "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_member - -# ac_fn_check_decl LINENO SYMBOL VAR INCLUDES EXTRA-OPTIONS FLAG-VAR -# ------------------------------------------------------------------ -# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR -# accordingly. Pass EXTRA-OPTIONS to the compiler, using FLAG-VAR. -ac_fn_check_decl () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - as_decl_name=`echo $2|sed 's/ *(.*//'` - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 -printf %s "checking whether $as_decl_name is declared... " >&6; } -if eval test \${$3+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` - eval ac_save_FLAGS=\$$6 - as_fn_append $6 " $5" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main (void) -{ -#ifndef $as_decl_name -#ifdef __cplusplus - (void) $as_decl_use; -#else - (void) $as_decl_name; -#endif -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - eval "$3=yes" -else case e in #( - e) eval "$3=no" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - eval $6=\$ac_save_FLAGS - ;; -esac -fi -eval ac_res=\$$3 - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -printf '%s\n' "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_check_decl -ac_configure_args_raw= -for ac_arg -do - case $ac_arg in - *\'*) - ac_arg=`printf '%s\n' "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append ac_configure_args_raw " '$ac_arg'" -done - -case $ac_configure_args_raw in - *$as_nl*) - ac_safe_unquote= ;; - *) - ac_unsafe_z='|&;<>()$`\\"*?[ '' ' # This string ends in space, tab. - ac_unsafe_a="$ac_unsafe_z#~" - ac_safe_unquote="s/ '\\([^$ac_unsafe_a][^$ac_unsafe_z]*\\)'/ \\1/g" - ac_configure_args_raw=` printf '%s\n' "$ac_configure_args_raw" | sed "$ac_safe_unquote"`;; -esac - -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by XZ Utils $as_me 5.8.0, which was -generated by GNU Autoconf 2.73. Invocation command line was - - $ $0$ac_configure_args_raw - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - printf '%s\n' "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`printf '%s\n' "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# Dump the cache to stdout. It can be in a pipe (this is a requirement). -ac_cache_dump () -{ - # The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -printf '%s\n' "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # 'set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # 'set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) -} - -# Print debugging info to stdout. -ac_dump_debugging_info () -{ - echo - - printf '%s\n' "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - ac_cache_dump - echo - - printf '%s\n' "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'*) ac_val=`printf '%s\n' "$ac_val" | sed "s/'/'\\\\\\\\''/g"`;; - esac - printf '%s\n' "$ac_var='$ac_val'" - done | sort - echo - - if test -n "$ac_subst_files"; then - printf '%s\n' "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'*) ac_val=`printf '%s\n' "$ac_val" | sed "s/'/'\\\\\\\\''/g"`;; - esac - printf '%s\n' "$ac_var='$ac_val'" - done | sort - echo - fi - - if test -s confdefs.h; then - printf '%s\n' "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - printf '%s\n' "$as_me: caught signal $ac_signal" - printf '%s\n' "$as_me: exit $exit_status" -} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. -ac_exit_trap () -{ - exit_status= - # Sanitize IFS. - IFS=" "" $as_nl" - # Save into config.log some information that might help in debugging. - ac_dump_debugging_info >&5 - eval "rm -f $ac_clean_CONFIG_STATUS core *.core core.conftest.*" && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -} - -trap 'ac_exit_trap $?' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -printf '%s\n' "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -printf '%s\n' "#define PACKAGE_NAME \"$PACKAGE_NAME\"" >>confdefs.h - -printf '%s\n' "#define PACKAGE_TARNAME \"$PACKAGE_TARNAME\"" >>confdefs.h - -printf '%s\n' "#define PACKAGE_VERSION \"$PACKAGE_VERSION\"" >>confdefs.h - -printf '%s\n' "#define PACKAGE_STRING \"$PACKAGE_STRING\"" >>confdefs.h - -printf '%s\n' "#define PACKAGE_BUGREPORT \"$PACKAGE_BUGREPORT\"" >>confdefs.h - -printf '%s\n' "#define PACKAGE_URL \"$PACKAGE_URL\"" >>confdefs.h - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -if test -n "$CONFIG_SITE"; then - ac_site_files="$CONFIG_SITE" -elif test "x$prefix" != xNONE; then - ac_site_files="$prefix/share/config.site $prefix/etc/config.site" -else - ac_site_files="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" -fi - -for ac_site_file in $ac_site_files -do - case $ac_site_file in #( - */*) : - ;; #( - *) : - ac_site_file=./$ac_site_file ;; -esac - if test -f "$ac_site_file" && test -r "$ac_site_file"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -printf '%s\n' "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See 'config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -printf '%s\n' "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -printf '%s\n' "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Test code for whether the C compiler supports C23 (global declarations) -ac_c_conftest_c23_globals=' -/* Does the compiler advertise conformance to C17 or earlier? - Although GCC 14 does not do that, even with -std=gnu23, - it is close enough, and defines __STDC_VERSION == 202000L. */ -#if !defined __STDC_VERSION__ || __STDC_VERSION__ <= 201710L -# error "Compiler advertises conformance to C17 or earlier" -#endif - -// Check alignas. -char alignas (double) c23_aligned_as_double; -char alignas (0) c23_no_special_alignment; -extern char c23_aligned_as_int; -char alignas (0) alignas (int) c23_aligned_as_int; - -// Check alignof. -enum -{ - c23_int_alignment = alignof (int), - c23_int_array_alignment = alignof (int[100]), - c23_char_alignment = alignof (char) -}; -static_assert (0 < -alignof (int), "alignof is signed"); - -int function_with_unnamed_parameter (int) { return 0; } - -void c23_noreturn (); - -/* Test parsing of string and char UTF-8 literals (including hex escapes). - The parens pacify GCC 15. */ -bool use_u8 = (!sizeof u8"\xFF") == (!u8'\''x'\''); - -bool check_that_bool_works = true | false | !nullptr; -#if !true -# error "true does not work in #if" -#endif -#if false -#elifdef __STDC_VERSION__ -#else -# error "#elifdef does not work" -#endif - -#ifndef __has_c_attribute -# error "__has_c_attribute not defined" -#endif - -#ifndef __has_include -# error "__has_include not defined" -#endif - -#define LPAREN() ( -#define FORTY_TWO(x) 42 -#define VA_OPT_TEST(r, x, ...) __VA_OPT__ (FORTY_TWO r x)) -static_assert (VA_OPT_TEST (LPAREN (), 0, <:-) == 42); - -static_assert (0b101010 == 42); -static_assert (0B101010 == 42); -static_assert (0xDEAD'\''BEEF == 3'\''735'\''928'\''559); -static_assert (0.500'\''000'\''000 == 0.5); - -enum unsignedish : unsigned int { uione = 1 }; -static_assert (0 < -uione); - -#include -constexpr nullptr_t null_pointer = nullptr; - -static typeof (1 + 1L) two () { return 2; } -static long int three () { return 3; } -' - -# Test code for whether the C compiler supports C23 (body of main). -ac_c_conftest_c23_main=' - { - label_before_declaration: - int arr[10] = {}; - if (arr[0]) - goto label_before_declaration; - if (!arr[0]) - goto label_at_end_of_block; - label_at_end_of_block: - } - ok |= !null_pointer; - ok |= two != three; -' - -# Test code for whether the C compiler supports C23 (complete). -ac_c_conftest_c23_program="${ac_c_conftest_c23_globals} - -int -main (int, char **) -{ - int ok = 0; - ${ac_c_conftest_c23_main} - return ok; -} -" - -# Test code for whether the C compiler supports C89 (global declarations) -ac_c_conftest_c89_globals=' -/* Do not test the value of __STDC__, because some compilers define it to 0 - or do not define it, while otherwise adequately conforming. */ - -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7 src/conf.sh. */ -struct buf { int x; }; -struct buf * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (char **p, int i) -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* C89 style stringification. */ -#define noexpand_stringify(a) #a -const char *stringified = noexpand_stringify(arbitrary+token=sequence); - -/* C89 style token pasting. Exercises some of the corner cases that - e.g. old MSVC gets wrong, but not very hard. */ -#define noexpand_concat(a,b) a##b -#define expand_concat(a,b) noexpand_concat(a,b) -extern int vA; -extern int vbee; -#define aye A -#define bee B -int *pvA = &expand_concat(v,aye); -int *pvbee = &noexpand_concat(v,bee); - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not \xHH hex character constants. - These do not provoke an error unfortunately, instead are silently treated - as an "x". The following induces an error, until -std is added to get - proper ANSI mode. Curiously \x00 != x always comes out true, for an - array size at least. It is necessary to write \x00 == 0 to get something - that is true only with -std. */ -int osf4_cc_array ['\''\x00'\'' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) '\''x'\'' -int xlc6_cc_array[FOO(a) == '\''x'\'' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, int *(*)(struct buf *, struct stat *, int), - int, int);' - -# Test code for whether the C compiler supports C89 (body of main). -ac_c_conftest_c89_main=' -ok |= (argc == 0 || f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]); -' - -# Test code for whether the C compiler supports C99 (global declarations) -ac_c_conftest_c99_globals=' -/* Does the compiler advertise C99 conformance? */ -#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 199901L -# error "Compiler does not advertise C99 conformance" -#endif - -// See if C++-style comments work. - -#include -extern int puts (const char *); -extern int printf (const char *, ...); -extern int dprintf (int, const char *, ...); -extern void *malloc (size_t); -extern void free (void *); - -// Check varargs macros. These examples are taken from C99 6.10.3.5. -// dprintf is used instead of fprintf to avoid needing to declare -// FILE and stderr, and "aND" is used instead of "and" to work around -// GCC bug 40564 which is irrelevant here. -#define debug(...) dprintf (2, __VA_ARGS__) -#define showlist(...) puts (#__VA_ARGS__) -#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) -static void -test_varargs_macros (void) -{ - int x = 1234; - int y = 5678; - debug ("Flag"); - debug ("X = %d\n", x); - showlist (The first, second, aND third items.); - report (x>y, "x is %d but y is %d", x, y); -} - -// Check long long types. -#define BIG64 18446744073709551615ull -#define BIG32 4294967295ul -#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) -#if !BIG_OK - #error "your preprocessor is broken" -#endif -#if BIG_OK -#else - #error "your preprocessor is broken" -#endif -static long long int bignum = -9223372036854775807LL; -static unsigned long long int ubignum = BIG64; - -struct incomplete_array -{ - int datasize; - double data[]; -}; - -struct named_init { - int number; - const wchar_t *name; - double average; -}; - -typedef const char *ccp; - -static inline int -test_restrict (ccp restrict text) -{ - // Iterate through items via the restricted pointer. - // Also check for declarations in for loops. - for (unsigned int i = 0; *(text+i) != '\''\0'\''; ++i) - continue; - return 0; -} - -// Check varargs and va_copy. -static bool -test_varargs (const char *format, ...) -{ - va_list args; - va_start (args, format); - va_list args_copy; - va_copy (args_copy, args); - - const char *str = ""; - int number = 0; - float fnumber = 0; - - while (*format) - { - switch (*format++) - { - case '\''s'\'': // string - str = va_arg (args_copy, const char *); - break; - case '\''d'\'': // int - number = va_arg (args_copy, int); - break; - case '\''f'\'': // float - fnumber = va_arg (args_copy, double); - break; - default: - break; - } - } - va_end (args_copy); - va_end (args); - - return *str && number && fnumber; -} -' - -# Test code for whether the C compiler supports C99 (body of main). -ac_c_conftest_c99_main=' - // Check bool. - _Bool success = false; - success |= (argc != 0); - - // Check restrict. - if (test_restrict ("String literal") == 0) - success = true; - const char *restrict newvar = "Another string"; - - // Check varargs. - success &= test_varargs ("s, d'\'' f .", "string", 65, 34.234); - test_varargs_macros (); - - // Check flexible array members. - static struct incomplete_array *volatile incomplete_array_pointer; - struct incomplete_array *ia = incomplete_array_pointer; - ia->datasize = 10; - for (int i = 0; i < ia->datasize; ++i) - ia->data[i] = i * 1.234; - // Work around memory leak warnings. - free (ia); - - // Check named initializers. - struct named_init ni = { - .number = 34, - .name = L"Test wide string", - .average = 543.34343, - }; - - ni.number = 58; - - // Do not test for VLAs, as some otherwise-conforming compilers lack them. - // C code should instead use __STDC_NO_VLA__; see Autoconf manual. - - // work around unused variable warnings - ok |= (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == '\''x'\'' - || ni.number != 58); -' - -# Test code for whether the C compiler supports C11 (global declarations) -ac_c_conftest_c11_globals=' -/* Does the compiler advertise C11 conformance? */ -#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L -# error "Compiler does not advertise C11 conformance" -#endif - -// Check _Alignas. -char _Alignas (double) aligned_as_double; -char _Alignas (0) no_special_alignment; -extern char aligned_as_int; -char _Alignas (0) _Alignas (int) aligned_as_int; - -// Check _Alignof. -enum -{ - int_alignment = _Alignof (int), - int_array_alignment = _Alignof (int[100]), - char_alignment = _Alignof (char) -}; -_Static_assert (0 < -_Alignof (int), "_Alignof is signed"); - -// Check _Noreturn. -int _Noreturn does_not_return (void) { for (;;) continue; } - -// Check _Static_assert. -struct test_static_assert -{ - int x; - _Static_assert (sizeof (int) <= sizeof (long int), - "_Static_assert does not work in struct"); - long int y; -}; - -// Check UTF-8 literals. -#define u8 syntax error! -char const utf8_literal[] = u8"happens to be ASCII" "another string"; - -// Check duplicate typedefs. -typedef long *long_ptr; -typedef long int *long_ptr; -typedef long_ptr long_ptr; - -// Anonymous structures and unions -- taken from C11 6.7.2.1 Example 1. -struct anonymous -{ - union { - struct { int i; int j; }; - struct { int k; long int l; } w; - }; - int m; -} v1; -' - -# Test code for whether the C compiler supports C11 (body of main). -ac_c_conftest_c11_main=' - _Static_assert ((offsetof (struct anonymous, i) - == offsetof (struct anonymous, w.k)), - "Anonymous union alignment botch"); - v1.i = 2; - v1.w.k = 5; - ok |= v1.i != 5; -' - -# Test code for whether the C compiler supports C11 (complete). -ac_c_conftest_c11_program="${ac_c_conftest_c89_globals} -${ac_c_conftest_c99_globals} -${ac_c_conftest_c11_globals} - -int -main (int argc, char **argv) -{ - int ok = 0; - ${ac_c_conftest_c89_main} - ${ac_c_conftest_c99_main} - ${ac_c_conftest_c11_main} - return ok; -} -" - -# Test code for whether the C compiler supports C99 (complete). -ac_c_conftest_c99_program="${ac_c_conftest_c89_globals} -${ac_c_conftest_c99_globals} - -int -main (int argc, char **argv) -{ - int ok = 0; - ${ac_c_conftest_c89_main} - ${ac_c_conftest_c99_main} - return ok; -} -" - -# Test code for whether the C compiler supports C89 (complete). -ac_c_conftest_c89_program="${ac_c_conftest_c89_globals} - -int -main (int argc, char **argv) -{ - int ok = 0; - ${ac_c_conftest_c89_main} - return ok; -} -" - -as_fn_append ac_header_c_list " stdio.h stdio_h HAVE_STDIO_H" -as_fn_append ac_header_c_list " stdlib.h stdlib_h HAVE_STDLIB_H" -as_fn_append ac_header_c_list " string.h string_h HAVE_STRING_H" -as_fn_append ac_header_c_list " inttypes.h inttypes_h HAVE_INTTYPES_H" -as_fn_append ac_header_c_list " stdint.h stdint_h HAVE_STDINT_H" -as_fn_append ac_header_c_list " strings.h strings_h HAVE_STRINGS_H" -as_fn_append ac_header_c_list " sys/stat.h sys_stat_h HAVE_SYS_STAT_H" -as_fn_append ac_header_c_list " sys/types.h sys_types_h HAVE_SYS_TYPES_H" -as_fn_append ac_header_c_list " unistd.h unistd_h HAVE_UNISTD_H" -as_fn_append ac_header_c_list " wchar.h wchar_h HAVE_WCHAR_H" -as_fn_append ac_header_c_list " minix/config.h minix_config_h HAVE_MINIX_CONFIG_H" -gt_needs="$gt_needs " - -# Auxiliary files required by this configure script. -ac_aux_files="config.rpath install-sh ltmain.sh config.guess config.sub" - -# Locations in which to look for auxiliary files. -ac_aux_dir_candidates="${srcdir}/build/autoconf" - -# Search for a directory containing all of the required auxiliary files, -# $ac_aux_files, from the $PATH-style list $ac_aux_dir_candidates. -# If we don't find one directory that contains all the files we need, -# we report the set of missing files from the *first* directory in -# $ac_aux_dir_candidates and give up. -ac_missing_aux_files="" -ac_first_candidate=: -printf '%s\n' "$as_me:${as_lineno-$LINENO}: looking for aux files: $ac_aux_files" >&5 -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in $ac_aux_dir_candidates -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - as_found=: - - printf '%s\n' "$as_me:${as_lineno-$LINENO}: trying $as_dir" >&5 - ac_aux_dir_found=yes - ac_install_sh= - for ac_aux in $ac_aux_files - do - # As a special case, if "install-sh" is required, that requirement - # can be satisfied by any of "install-sh", "install.sh", or "shtool", - # and $ac_install_sh is set appropriately for whichever one is found. - if test x"$ac_aux" = x"install-sh" - then - if test -f "${as_dir}install-sh"; then - printf '%s\n' "$as_me:${as_lineno-$LINENO}: ${as_dir}install-sh found" >&5 - ac_install_sh="${as_dir}install-sh -c" - elif test -f "${as_dir}install.sh"; then - printf '%s\n' "$as_me:${as_lineno-$LINENO}: ${as_dir}install.sh found" >&5 - ac_install_sh="${as_dir}install.sh -c" - elif test -f "${as_dir}shtool"; then - printf '%s\n' "$as_me:${as_lineno-$LINENO}: ${as_dir}shtool found" >&5 - ac_install_sh="${as_dir}shtool install -c" - else - ac_aux_dir_found=no - if $ac_first_candidate; then - ac_missing_aux_files="${ac_missing_aux_files} install-sh" - else - break - fi - fi - else - if test -f "${as_dir}${ac_aux}"; then - printf '%s\n' "$as_me:${as_lineno-$LINENO}: ${as_dir}${ac_aux} found" >&5 - else - ac_aux_dir_found=no - if $ac_first_candidate; then - ac_missing_aux_files="${ac_missing_aux_files} ${ac_aux}" - else - break - fi - fi - fi - done - if test "$ac_aux_dir_found" = yes; then - ac_aux_dir="$as_dir" - break - fi - ac_first_candidate=false - - as_found=false -done -IFS=$as_save_IFS -if $as_found -then : - -else case e in #( - e) as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 ;; -esac -fi - - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -if test -f "${ac_aux_dir}config.guess"; then - ac_config_guess="$SHELL ${ac_aux_dir}config.guess" -fi -if test -f "${ac_aux_dir}config.sub"; then - ac_config_sub="$SHELL ${ac_aux_dir}config.sub" -fi -if test -f "$ac_aux_dir/configure"; then - ac_configure="$SHELL ${ac_aux_dir}configure" -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&5 -printf '%s\n' "$as_me: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was not set in the previous run" >&5 -printf '%s\n' "$as_me: error: '$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w= - for ac_val in x $ac_old_val; do - ac_old_val_w="$ac_old_val_w $ac_val" - done - ac_new_val_w= - for ac_val in x $ac_new_val; do - ac_new_val_w="$ac_new_val_w $ac_val" - done - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: '$ac_var' has changed since the previous run:" >&5 -printf '%s\n' "$as_me: error: '$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&5 -printf '%s\n' "$as_me: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: former value: '$ac_old_val'" >&5 -printf '%s\n' "$as_me: former value: '$ac_old_val'" >&2;} - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: current value: '$ac_new_val'" >&5 -printf '%s\n' "$as_me: current value: '$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`printf '%s\n' "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -printf '%s\n' "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run '${MAKE-make} distclean' and/or 'rm $cache_file' - and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - - -# Determine whether it's possible to make 'echo' print without a newline. -# These variables are no longer used directly by Autoconf, but are AC_SUBSTed -# for compatibility with existing Makefiles. -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - -ac_config_headers="$ac_config_headers cbits/config.h" - - -echo -echo "$PACKAGE_STRING" - -echo -echo "System type:" -# This is needed to know if assembler optimizations can be used. - - - - # Make sure we can run config.sub. -$SHELL "${ac_aux_dir}config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL ${ac_aux_dir}config.sub" "$LINENO" 5 - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -printf %s "checking build system type... " >&6; } -if test ${ac_cv_build+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "${ac_aux_dir}config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "${ac_aux_dir}config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $ac_build_alias failed" "$LINENO" 5 - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -printf '%s\n' "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`printf '%s\n' "$build_os" | sed 's/ /-/g'`;; esac - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -printf %s "checking host system type... " >&6; } -if test ${ac_cv_host+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "${ac_aux_dir}config.sub" $host_alias` || - as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $host_alias failed" "$LINENO" 5 -fi - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -printf '%s\n' "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`printf '%s\n' "$host_os" | sed 's/ /-/g'`;; esac - - - -# We do some special things on Windows (32-bit or 64-bit) builds. -case $host_os in - mingw* | cygwin | msys) is_w32=yes ;; - *) is_w32=no ;; -esac - if test "$is_w32" = yes; then - COND_W32_TRUE= - COND_W32_FALSE='#' -else - COND_W32_TRUE='#' - COND_W32_FALSE= -fi - - -# We need to use $EXEEXT with $(LN_S) when creating symlinks to -# executables. Cygwin is an exception to this, since it is recommended -# that symlinks don't have the .exe suffix. To make this work, we -# define LN_EXEEXT. -# -# MSYS2 is treated the same way as Cygwin. It uses plain "msys" like -# the original MSYS when building MSYS/MSYS2-binaries. Hopefully this -# doesn't break things for the original MSYS developers. Note that this -# doesn't affect normal MSYS/MSYS2 users building non-MSYS/MSYS2 binaries -# since in that case the $host_os is usually mingw32. -case $host_os in - cygwin | msys) LN_EXEEXT= ;; - *) LN_EXEEXT='$(EXEEXT)' ;; -esac - - -echo -echo "Configure options:" -AM_CFLAGS= - - -############# -# Debugging # -############# - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if debugging code should be compiled" >&5 -printf %s "checking if debugging code should be compiled... " >&6; } -# Check whether --enable-debug was given. -if test ${enable_debug+y} -then : - enableval=$enable_debug; -else case e in #( - e) enable_debug=no ;; -esac -fi - -if test "x$enable_debug" = xyes; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } -else - -printf '%s\n' "#define NDEBUG 1" >>confdefs.h - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -########### -# Filters # -########### - - - - -enable_filter_lzma1=no -enable_encoder_lzma1=no -enable_decoder_lzma1=no -enable_filter_lzma2=no -enable_encoder_lzma2=no -enable_decoder_lzma2=no -enable_filter_delta=no -enable_encoder_delta=no -enable_decoder_delta=no -enable_filter_x86=no -enable_encoder_x86=no -enable_decoder_x86=no -enable_filter_powerpc=no -enable_encoder_powerpc=no -enable_decoder_powerpc=no -enable_filter_ia64=no -enable_encoder_ia64=no -enable_decoder_ia64=no -enable_filter_arm=no -enable_encoder_arm=no -enable_decoder_arm=no -enable_filter_armthumb=no -enable_encoder_armthumb=no -enable_decoder_armthumb=no -enable_filter_arm64=no -enable_encoder_arm64=no -enable_decoder_arm64=no -enable_filter_sparc=no -enable_encoder_sparc=no -enable_decoder_sparc=no -enable_filter_riscv=no -enable_encoder_riscv=no -enable_decoder_riscv=no - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which encoders to build" >&5 -printf %s "checking which encoders to build... " >&6; } -# Check whether --enable-encoders was given. -if test ${enable_encoders+y} -then : - enableval=$enable_encoders; -else case e in #( - e) enable_encoders=lzma1,lzma2,delta,x86,powerpc,ia64,arm,armthumb,arm64,sparc,riscv ;; -esac -fi - -enable_encoders=`echo "$enable_encoders" | sed 's/,/ /g'` -if test "x$enable_encoders" = xno || test "x$enable_encoders" = x; then - enable_encoders=no - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: (none)" >&5 -printf '%s\n' "(none)" >&6; } -else - for arg in $enable_encoders - do - case $arg in - lzma1) - enable_filter_lzma1=yes - enable_encoder_lzma1=yes - -printf '%s\n' "#define HAVE_ENCODER_LZMA1 1" >>confdefs.h - - ;; - lzma2) - enable_filter_lzma2=yes - enable_encoder_lzma2=yes - -printf '%s\n' "#define HAVE_ENCODER_LZMA2 1" >>confdefs.h - - ;; - delta) - enable_filter_delta=yes - enable_encoder_delta=yes - -printf '%s\n' "#define HAVE_ENCODER_DELTA 1" >>confdefs.h - - ;; - x86) - enable_filter_x86=yes - enable_encoder_x86=yes - -printf '%s\n' "#define HAVE_ENCODER_X86 1" >>confdefs.h - - ;; - powerpc) - enable_filter_powerpc=yes - enable_encoder_powerpc=yes - -printf '%s\n' "#define HAVE_ENCODER_POWERPC 1" >>confdefs.h - - ;; - ia64) - enable_filter_ia64=yes - enable_encoder_ia64=yes - -printf '%s\n' "#define HAVE_ENCODER_IA64 1" >>confdefs.h - - ;; - arm) - enable_filter_arm=yes - enable_encoder_arm=yes - -printf '%s\n' "#define HAVE_ENCODER_ARM 1" >>confdefs.h - - ;; - armthumb) - enable_filter_armthumb=yes - enable_encoder_armthumb=yes - -printf '%s\n' "#define HAVE_ENCODER_ARMTHUMB 1" >>confdefs.h - - ;; - arm64) - enable_filter_arm64=yes - enable_encoder_arm64=yes - -printf '%s\n' "#define HAVE_ENCODER_ARM64 1" >>confdefs.h - - ;; - sparc) - enable_filter_sparc=yes - enable_encoder_sparc=yes - -printf '%s\n' "#define HAVE_ENCODER_SPARC 1" >>confdefs.h - - ;; - riscv) - enable_filter_riscv=yes - enable_encoder_riscv=yes - -printf '%s\n' "#define HAVE_ENCODER_RISCV 1" >>confdefs.h - - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "unknown filter: $arg" "$LINENO" 5 - ;; - esac - done - -printf '%s\n' "#define HAVE_ENCODERS 1" >>confdefs.h - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_encoders" >&5 -printf '%s\n' "$enable_encoders" >&6; } -fi - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which decoders to build" >&5 -printf %s "checking which decoders to build... " >&6; } -# Check whether --enable-decoders was given. -if test ${enable_decoders+y} -then : - enableval=$enable_decoders; -else case e in #( - e) enable_decoders=lzma1,lzma2,delta,x86,powerpc,ia64,arm,armthumb,arm64,sparc,riscv ;; -esac -fi - -enable_decoders=`echo "$enable_decoders" | sed 's/,/ /g'` -if test "x$enable_decoders" = xno || test "x$enable_decoders" = x; then - enable_decoders=no - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: (none)" >&5 -printf '%s\n' "(none)" >&6; } -else - for arg in $enable_decoders - do - case $arg in - lzma1) - enable_filter_lzma1=yes - enable_decoder_lzma1=yes - -printf '%s\n' "#define HAVE_DECODER_LZMA1 1" >>confdefs.h - - ;; - lzma2) - enable_filter_lzma2=yes - enable_decoder_lzma2=yes - -printf '%s\n' "#define HAVE_DECODER_LZMA2 1" >>confdefs.h - - ;; - delta) - enable_filter_delta=yes - enable_decoder_delta=yes - -printf '%s\n' "#define HAVE_DECODER_DELTA 1" >>confdefs.h - - ;; - x86) - enable_filter_x86=yes - enable_decoder_x86=yes - -printf '%s\n' "#define HAVE_DECODER_X86 1" >>confdefs.h - - ;; - powerpc) - enable_filter_powerpc=yes - enable_decoder_powerpc=yes - -printf '%s\n' "#define HAVE_DECODER_POWERPC 1" >>confdefs.h - - ;; - ia64) - enable_filter_ia64=yes - enable_decoder_ia64=yes - -printf '%s\n' "#define HAVE_DECODER_IA64 1" >>confdefs.h - - ;; - arm) - enable_filter_arm=yes - enable_decoder_arm=yes - -printf '%s\n' "#define HAVE_DECODER_ARM 1" >>confdefs.h - - ;; - armthumb) - enable_filter_armthumb=yes - enable_decoder_armthumb=yes - -printf '%s\n' "#define HAVE_DECODER_ARMTHUMB 1" >>confdefs.h - - ;; - arm64) - enable_filter_arm64=yes - enable_decoder_arm64=yes - -printf '%s\n' "#define HAVE_DECODER_ARM64 1" >>confdefs.h - - ;; - sparc) - enable_filter_sparc=yes - enable_decoder_sparc=yes - -printf '%s\n' "#define HAVE_DECODER_SPARC 1" >>confdefs.h - - ;; - riscv) - enable_filter_riscv=yes - enable_decoder_riscv=yes - -printf '%s\n' "#define HAVE_DECODER_RISCV 1" >>confdefs.h - - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "unknown filter: $arg" "$LINENO" 5 - ;; - esac - done - -printf '%s\n' "#define HAVE_DECODERS 1" >>confdefs.h - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_decoders" >&5 -printf '%s\n' "$enable_decoders" >&6; } -fi - -if test "x$enable_encoder_lzma2$enable_encoder_lzma1" = xyesno \ - || test "x$enable_decoder_lzma2$enable_decoder_lzma1" = xyesno; then - as_fn_error $? "LZMA2 requires that LZMA1 is also enabled." "$LINENO" 5 -fi - - if test "x$enable_encoders" != xno; then - COND_MAIN_ENCODER_TRUE= - COND_MAIN_ENCODER_FALSE='#' -else - COND_MAIN_ENCODER_TRUE='#' - COND_MAIN_ENCODER_FALSE= -fi - - if test "x$enable_decoders" != xno; then - COND_MAIN_DECODER_TRUE= - COND_MAIN_DECODER_FALSE='#' -else - COND_MAIN_DECODER_TRUE='#' - COND_MAIN_DECODER_FALSE= -fi - - - if test "x$enable_filter_lzma1" = xyes; then - COND_FILTER_LZMA1_TRUE= - COND_FILTER_LZMA1_FALSE='#' -else - COND_FILTER_LZMA1_TRUE='#' - COND_FILTER_LZMA1_FALSE= -fi - - if test "x$enable_encoder_lzma1" = xyes; then - COND_ENCODER_LZMA1_TRUE= - COND_ENCODER_LZMA1_FALSE='#' -else - COND_ENCODER_LZMA1_TRUE='#' - COND_ENCODER_LZMA1_FALSE= -fi - - if test "x$enable_decoder_lzma1" = xyes; then - COND_DECODER_LZMA1_TRUE= - COND_DECODER_LZMA1_FALSE='#' -else - COND_DECODER_LZMA1_TRUE='#' - COND_DECODER_LZMA1_FALSE= -fi - - if test "x$enable_filter_lzma2" = xyes; then - COND_FILTER_LZMA2_TRUE= - COND_FILTER_LZMA2_FALSE='#' -else - COND_FILTER_LZMA2_TRUE='#' - COND_FILTER_LZMA2_FALSE= -fi - - if test "x$enable_encoder_lzma2" = xyes; then - COND_ENCODER_LZMA2_TRUE= - COND_ENCODER_LZMA2_FALSE='#' -else - COND_ENCODER_LZMA2_TRUE='#' - COND_ENCODER_LZMA2_FALSE= -fi - - if test "x$enable_decoder_lzma2" = xyes; then - COND_DECODER_LZMA2_TRUE= - COND_DECODER_LZMA2_FALSE='#' -else - COND_DECODER_LZMA2_TRUE='#' - COND_DECODER_LZMA2_FALSE= -fi - - if test "x$enable_filter_delta" = xyes; then - COND_FILTER_DELTA_TRUE= - COND_FILTER_DELTA_FALSE='#' -else - COND_FILTER_DELTA_TRUE='#' - COND_FILTER_DELTA_FALSE= -fi - - if test "x$enable_encoder_delta" = xyes; then - COND_ENCODER_DELTA_TRUE= - COND_ENCODER_DELTA_FALSE='#' -else - COND_ENCODER_DELTA_TRUE='#' - COND_ENCODER_DELTA_FALSE= -fi - - if test "x$enable_decoder_delta" = xyes; then - COND_DECODER_DELTA_TRUE= - COND_DECODER_DELTA_FALSE='#' -else - COND_DECODER_DELTA_TRUE='#' - COND_DECODER_DELTA_FALSE= -fi - - if test "x$enable_filter_x86" = xyes; then - COND_FILTER_X86_TRUE= - COND_FILTER_X86_FALSE='#' -else - COND_FILTER_X86_TRUE='#' - COND_FILTER_X86_FALSE= -fi - - if test "x$enable_encoder_x86" = xyes; then - COND_ENCODER_X86_TRUE= - COND_ENCODER_X86_FALSE='#' -else - COND_ENCODER_X86_TRUE='#' - COND_ENCODER_X86_FALSE= -fi - - if test "x$enable_decoder_x86" = xyes; then - COND_DECODER_X86_TRUE= - COND_DECODER_X86_FALSE='#' -else - COND_DECODER_X86_TRUE='#' - COND_DECODER_X86_FALSE= -fi - - if test "x$enable_filter_powerpc" = xyes; then - COND_FILTER_POWERPC_TRUE= - COND_FILTER_POWERPC_FALSE='#' -else - COND_FILTER_POWERPC_TRUE='#' - COND_FILTER_POWERPC_FALSE= -fi - - if test "x$enable_encoder_powerpc" = xyes; then - COND_ENCODER_POWERPC_TRUE= - COND_ENCODER_POWERPC_FALSE='#' -else - COND_ENCODER_POWERPC_TRUE='#' - COND_ENCODER_POWERPC_FALSE= -fi - - if test "x$enable_decoder_powerpc" = xyes; then - COND_DECODER_POWERPC_TRUE= - COND_DECODER_POWERPC_FALSE='#' -else - COND_DECODER_POWERPC_TRUE='#' - COND_DECODER_POWERPC_FALSE= -fi - - if test "x$enable_filter_ia64" = xyes; then - COND_FILTER_IA64_TRUE= - COND_FILTER_IA64_FALSE='#' -else - COND_FILTER_IA64_TRUE='#' - COND_FILTER_IA64_FALSE= -fi - - if test "x$enable_encoder_ia64" = xyes; then - COND_ENCODER_IA64_TRUE= - COND_ENCODER_IA64_FALSE='#' -else - COND_ENCODER_IA64_TRUE='#' - COND_ENCODER_IA64_FALSE= -fi - - if test "x$enable_decoder_ia64" = xyes; then - COND_DECODER_IA64_TRUE= - COND_DECODER_IA64_FALSE='#' -else - COND_DECODER_IA64_TRUE='#' - COND_DECODER_IA64_FALSE= -fi - - if test "x$enable_filter_arm" = xyes; then - COND_FILTER_ARM_TRUE= - COND_FILTER_ARM_FALSE='#' -else - COND_FILTER_ARM_TRUE='#' - COND_FILTER_ARM_FALSE= -fi - - if test "x$enable_encoder_arm" = xyes; then - COND_ENCODER_ARM_TRUE= - COND_ENCODER_ARM_FALSE='#' -else - COND_ENCODER_ARM_TRUE='#' - COND_ENCODER_ARM_FALSE= -fi - - if test "x$enable_decoder_arm" = xyes; then - COND_DECODER_ARM_TRUE= - COND_DECODER_ARM_FALSE='#' -else - COND_DECODER_ARM_TRUE='#' - COND_DECODER_ARM_FALSE= -fi - - if test "x$enable_filter_armthumb" = xyes; then - COND_FILTER_ARMTHUMB_TRUE= - COND_FILTER_ARMTHUMB_FALSE='#' -else - COND_FILTER_ARMTHUMB_TRUE='#' - COND_FILTER_ARMTHUMB_FALSE= -fi - - if test "x$enable_encoder_armthumb" = xyes; then - COND_ENCODER_ARMTHUMB_TRUE= - COND_ENCODER_ARMTHUMB_FALSE='#' -else - COND_ENCODER_ARMTHUMB_TRUE='#' - COND_ENCODER_ARMTHUMB_FALSE= -fi - - if test "x$enable_decoder_armthumb" = xyes; then - COND_DECODER_ARMTHUMB_TRUE= - COND_DECODER_ARMTHUMB_FALSE='#' -else - COND_DECODER_ARMTHUMB_TRUE='#' - COND_DECODER_ARMTHUMB_FALSE= -fi - - if test "x$enable_filter_arm64" = xyes; then - COND_FILTER_ARM64_TRUE= - COND_FILTER_ARM64_FALSE='#' -else - COND_FILTER_ARM64_TRUE='#' - COND_FILTER_ARM64_FALSE= -fi - - if test "x$enable_encoder_arm64" = xyes; then - COND_ENCODER_ARM64_TRUE= - COND_ENCODER_ARM64_FALSE='#' -else - COND_ENCODER_ARM64_TRUE='#' - COND_ENCODER_ARM64_FALSE= -fi - - if test "x$enable_decoder_arm64" = xyes; then - COND_DECODER_ARM64_TRUE= - COND_DECODER_ARM64_FALSE='#' -else - COND_DECODER_ARM64_TRUE='#' - COND_DECODER_ARM64_FALSE= -fi - - if test "x$enable_filter_sparc" = xyes; then - COND_FILTER_SPARC_TRUE= - COND_FILTER_SPARC_FALSE='#' -else - COND_FILTER_SPARC_TRUE='#' - COND_FILTER_SPARC_FALSE= -fi - - if test "x$enable_encoder_sparc" = xyes; then - COND_ENCODER_SPARC_TRUE= - COND_ENCODER_SPARC_FALSE='#' -else - COND_ENCODER_SPARC_TRUE='#' - COND_ENCODER_SPARC_FALSE= -fi - - if test "x$enable_decoder_sparc" = xyes; then - COND_DECODER_SPARC_TRUE= - COND_DECODER_SPARC_FALSE='#' -else - COND_DECODER_SPARC_TRUE='#' - COND_DECODER_SPARC_FALSE= -fi - - if test "x$enable_filter_riscv" = xyes; then - COND_FILTER_RISCV_TRUE= - COND_FILTER_RISCV_FALSE='#' -else - COND_FILTER_RISCV_TRUE='#' - COND_FILTER_RISCV_FALSE= -fi - - if test "x$enable_encoder_riscv" = xyes; then - COND_ENCODER_RISCV_TRUE= - COND_ENCODER_RISCV_FALSE='#' -else - COND_ENCODER_RISCV_TRUE='#' - COND_ENCODER_RISCV_FALSE= -fi - - if test "x$enable_decoder_riscv" = xyes; then - COND_DECODER_RISCV_TRUE= - COND_DECODER_RISCV_FALSE='#' -else - COND_DECODER_RISCV_TRUE='#' - COND_DECODER_RISCV_FALSE= -fi - - -# The so called "simple filters" share common code. -enable_filter_simple=no -enable_encoder_simple=no -enable_decoder_simple=no -test "x$enable_filter_x86" = xyes && enable_filter_simple=yes -test "x$enable_encoder_x86" = xyes && enable_encoder_simple=yes -test "x$enable_decoder_x86" = xyes && enable_decoder_simple=yes -test "x$enable_filter_powerpc" = xyes && enable_filter_simple=yes -test "x$enable_encoder_powerpc" = xyes && enable_encoder_simple=yes -test "x$enable_decoder_powerpc" = xyes && enable_decoder_simple=yes -test "x$enable_filter_ia64" = xyes && enable_filter_simple=yes -test "x$enable_encoder_ia64" = xyes && enable_encoder_simple=yes -test "x$enable_decoder_ia64" = xyes && enable_decoder_simple=yes -test "x$enable_filter_arm" = xyes && enable_filter_simple=yes -test "x$enable_encoder_arm" = xyes && enable_encoder_simple=yes -test "x$enable_decoder_arm" = xyes && enable_decoder_simple=yes -test "x$enable_filter_armthumb" = xyes && enable_filter_simple=yes -test "x$enable_encoder_armthumb" = xyes && enable_encoder_simple=yes -test "x$enable_decoder_armthumb" = xyes && enable_decoder_simple=yes -test "x$enable_filter_arm64" = xyes && enable_filter_simple=yes -test "x$enable_encoder_arm64" = xyes && enable_encoder_simple=yes -test "x$enable_decoder_arm64" = xyes && enable_decoder_simple=yes -test "x$enable_filter_sparc" = xyes && enable_filter_simple=yes -test "x$enable_encoder_sparc" = xyes && enable_encoder_simple=yes -test "x$enable_decoder_sparc" = xyes && enable_decoder_simple=yes -test "x$enable_filter_riscv" = xyes && enable_filter_simple=yes -test "x$enable_encoder_riscv" = xyes && enable_encoder_simple=yes -test "x$enable_decoder_riscv" = xyes && enable_decoder_simple=yes - if test "x$enable_filter_simple" = xyes; then - COND_FILTER_SIMPLE_TRUE= - COND_FILTER_SIMPLE_FALSE='#' -else - COND_FILTER_SIMPLE_TRUE='#' - COND_FILTER_SIMPLE_FALSE= -fi - - if test "x$enable_encoder_simple" = xyes; then - COND_ENCODER_SIMPLE_TRUE= - COND_ENCODER_SIMPLE_FALSE='#' -else - COND_ENCODER_SIMPLE_TRUE='#' - COND_ENCODER_SIMPLE_FALSE= -fi - - if test "x$enable_decoder_simple" = xyes; then - COND_DECODER_SIMPLE_TRUE= - COND_DECODER_SIMPLE_FALSE='#' -else - COND_DECODER_SIMPLE_TRUE='#' - COND_DECODER_SIMPLE_FALSE= -fi - - -# LZ-based filters share common code. -enable_filter_lz=no -enable_encoder_lz=no -enable_decoder_lz=no -test "x$enable_filter_lzma1" = xyes && enable_filter_lz=yes -test "x$enable_encoder_lzma1" = xyes && enable_encoder_lz=yes -test "x$enable_decoder_lzma1" = xyes && enable_decoder_lz=yes -test "x$enable_filter_lzma2" = xyes && enable_filter_lz=yes -test "x$enable_encoder_lzma2" = xyes && enable_encoder_lz=yes -test "x$enable_decoder_lzma2" = xyes && enable_decoder_lz=yes - if test "x$enable_filter_lz" = xyes; then - COND_FILTER_LZ_TRUE= - COND_FILTER_LZ_FALSE='#' -else - COND_FILTER_LZ_TRUE='#' - COND_FILTER_LZ_FALSE= -fi - - if test "x$enable_encoder_lz" = xyes; then - COND_ENCODER_LZ_TRUE= - COND_ENCODER_LZ_FALSE='#' -else - COND_ENCODER_LZ_TRUE='#' - COND_ENCODER_LZ_FALSE= -fi - - if test "x$enable_decoder_lz" = xyes; then - COND_DECODER_LZ_TRUE= - COND_DECODER_LZ_FALSE='#' -else - COND_DECODER_LZ_TRUE='#' - COND_DECODER_LZ_FALSE= -fi - - - -################# -# Match finders # -################# - - - -enable_match_finder_hc3=no -enable_match_finder_hc4=no -enable_match_finder_bt2=no -enable_match_finder_bt3=no -enable_match_finder_bt4=no - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which match finders to build" >&5 -printf %s "checking which match finders to build... " >&6; } -# Check whether --enable-match-finders was given. -if test ${enable_match_finders+y} -then : - enableval=$enable_match_finders; -else case e in #( - e) enable_match_finders=hc3,hc4,bt2,bt3,bt4 ;; -esac -fi - -enable_match_finders=`echo "$enable_match_finders" | sed 's/,/ /g'` -if test "x$enable_encoder_lz" = xyes ; then - if test -z "$enable_match_finders"; then - as_fn_error $? "At least one match finder is required for an LZ-based encoder." "$LINENO" 5 - fi - - for arg in $enable_match_finders - do - case $arg in - hc3) - enable_match_finder_hc3=yes - -printf '%s\n' "#define HAVE_MF_HC3 1" >>confdefs.h - - ;; - hc4) - enable_match_finder_hc4=yes - -printf '%s\n' "#define HAVE_MF_HC4 1" >>confdefs.h - - ;; - bt2) - enable_match_finder_bt2=yes - -printf '%s\n' "#define HAVE_MF_BT2 1" >>confdefs.h - - ;; - bt3) - enable_match_finder_bt3=yes - -printf '%s\n' "#define HAVE_MF_BT3 1" >>confdefs.h - - ;; - bt4) - enable_match_finder_bt4=yes - -printf '%s\n' "#define HAVE_MF_BT4 1" >>confdefs.h - - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "unknown match finder: $arg" "$LINENO" 5 - ;; - esac - done - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_match_finders" >&5 -printf '%s\n' "$enable_match_finders" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: (none because not building any LZ-based encoder)" >&5 -printf '%s\n' "(none because not building any LZ-based encoder)" >&6; } -fi - - -#################### -# Integrity checks # -#################### - - - -enable_check_crc32=no -enable_check_crc64=no -enable_check_sha256=no - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which integrity checks to build" >&5 -printf %s "checking which integrity checks to build... " >&6; } -# Check whether --enable-checks was given. -if test ${enable_checks+y} -then : - enableval=$enable_checks; -else case e in #( - e) enable_checks=crc32,crc64,sha256 ;; -esac -fi - -enable_checks=`echo "$enable_checks" | sed 's/,/ /g'` -if test "x$enable_checks" = xno || test "x$enable_checks" = x; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: (none)" >&5 -printf '%s\n' "(none)" >&6; } -else - for arg in $enable_checks - do - case $arg in - crc32) - enable_check_crc32=yes - -printf '%s\n' "#define HAVE_CHECK_CRC32 1" >>confdefs.h - - ;; - crc64) - enable_check_crc64=yes - -printf '%s\n' "#define HAVE_CHECK_CRC64 1" >>confdefs.h - - ;; - sha256) - enable_check_sha256=yes - -printf '%s\n' "#define HAVE_CHECK_SHA256 1" >>confdefs.h - - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "unknown integrity check: $arg" "$LINENO" 5 - ;; - esac - done - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_checks" >&5 -printf '%s\n' "$enable_checks" >&6; } -fi -if test "x$enable_check_crc32" = xno ; then - as_fn_error $? "For now, the CRC32 check must always be enabled." "$LINENO" 5 -fi - - if test "x$enable_check_crc32" = xyes; then - COND_CHECK_CRC32_TRUE= - COND_CHECK_CRC32_FALSE='#' -else - COND_CHECK_CRC32_TRUE='#' - COND_CHECK_CRC32_FALSE= -fi - - if test "x$enable_check_crc64" = xyes; then - COND_CHECK_CRC64_TRUE= - COND_CHECK_CRC64_FALSE='#' -else - COND_CHECK_CRC64_TRUE='#' - COND_CHECK_CRC64_FALSE= -fi - - if test "x$enable_check_sha256" = xyes; then - COND_CHECK_SHA256_TRUE= - COND_CHECK_SHA256_FALSE='#' -else - COND_CHECK_SHA256_TRUE='#' - COND_CHECK_SHA256_FALSE= -fi - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if external SHA-256 should be used" >&5 -printf %s "checking if external SHA-256 should be used... " >&6; } -# Check whether --enable-external-sha256 was given. -if test ${enable_external_sha256+y} -then : - enableval=$enable_external_sha256; -else case e in #( - e) enable_external_sha256=no ;; -esac -fi - -if test "x$enable_check_sha256" != "xyes"; then - enable_external_sha256=no -fi -if test "x$enable_external_sha256" = xyes; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -############# -# MicroLZMA # -############# - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if MicroLZMA support should be built" >&5 -printf %s "checking if MicroLZMA support should be built... " >&6; } -# Check whether --enable-microlzma was given. -if test ${enable_microlzma+y} -then : - enableval=$enable_microlzma; -else case e in #( - e) enable_microlzma=yes ;; -esac -fi - -case $enable_microlzma in - yes | no) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_microlzma" >&5 -printf '%s\n' "$enable_microlzma" >&6; } - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "--enable-microlzma accepts only 'yes' or 'no'." "$LINENO" 5 - ;; -esac - if test "x$enable_microlzma" = xyes; then - COND_MICROLZMA_TRUE= - COND_MICROLZMA_FALSE='#' -else - COND_MICROLZMA_TRUE='#' - COND_MICROLZMA_FALSE= -fi - - - -############################# -# .lz (lzip) format support # -############################# - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if .lz (lzip) decompression support should be built" >&5 -printf %s "checking if .lz (lzip) decompression support should be built... " >&6; } -# Check whether --enable-lzip-decoder was given. -if test ${enable_lzip_decoder+y} -then : - enableval=$enable_lzip_decoder; -else case e in #( - e) enable_lzip_decoder=yes ;; -esac -fi - -if test "x$enable_decoder_lzma1" != xyes; then - enable_lzip_decoder=no - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no because LZMA1 decoder is disabled" >&5 -printf '%s\n' "no because LZMA1 decoder is disabled" >&6; } -elif test "x$enable_lzip_decoder" = xyes; then - -printf '%s\n' "#define HAVE_LZIP_DECODER 1" >>confdefs.h - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - if test "x$enable_lzip_decoder" = xyes; then - COND_LZIP_DECODER_TRUE= - COND_LZIP_DECODER_FALSE='#' -else - COND_LZIP_DECODER_TRUE='#' - COND_LZIP_DECODER_FALSE= -fi - - - -########################### -# Assembler optimizations # -########################### - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if assembler optimizations should be used" >&5 -printf %s "checking if assembler optimizations should be used... " >&6; } -# Check whether --enable-assembler was given. -if test ${enable_assembler+y} -then : - enableval=$enable_assembler; -else case e in #( - e) enable_assembler=yes ;; -esac -fi - -if test "x$enable_assembler" = xyes; then - enable_assembler=no - case $host_os in - # Darwin should work too but only if not creating universal - # binaries. Solaris x86 could work too but I cannot test. - linux* | *bsd* | mingw* | cygwin | msys | *djgpp*) - case $host_cpu in - i?86) enable_assembler=x86 ;; - esac - ;; - esac -fi -case $enable_assembler in - x86) - -printf '%s\n' "#define HAVE_CRC_X86_ASM 1" >>confdefs.h - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: x86" >&5 -printf '%s\n' "x86" >&6; } - ;; - no) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "--enable-assembler accepts only 'yes', 'no', or 'x86' (32-bit)." "$LINENO" 5 - ;; -esac - if test "x$enable_assembler" = xx86; then - COND_ASM_X86_TRUE= - COND_ASM_X86_FALSE='#' -else - COND_ASM_X86_TRUE='#' - COND_ASM_X86_FALSE= -fi - - - -############# -# CLMUL CRC # -############# - -# Check whether --enable-clmul-crc was given. -if test ${enable_clmul_crc+y} -then : - enableval=$enable_clmul_crc; -else case e in #( - e) enable_clmul_crc=yes ;; -esac -fi - - - -############################ -# ARM64 CRC32 Instructions # -############################ - -# Check whether --enable-arm64-crc32 was given. -if test ${enable_arm64_crc32+y} -then : - enableval=$enable_arm64_crc32; -else case e in #( - e) enable_arm64_crc32=yes ;; -esac -fi - - - -################################ -# LoongArch CRC32 instructions # -################################ - -# Check whether --enable-loongarch-crc32 was given. -if test ${enable_loongarch_crc32+y} -then : - enableval=$enable_loongarch_crc32; -else case e in #( - e) enable_loongarch_crc32=yes ;; -esac -fi - - - -##################### -# Size optimization # -##################### - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if small size is preferred over speed" >&5 -printf %s "checking if small size is preferred over speed... " >&6; } -# Check whether --enable-small was given. -if test ${enable_small+y} -then : - enableval=$enable_small; -else case e in #( - e) enable_small=no ;; -esac -fi - -if test "x$enable_small" = xyes; then - -printf '%s\n' "#define HAVE_SMALL 1" >>confdefs.h - -elif test "x$enable_small" != xno; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "--enable-small accepts only 'yes' or 'no'" "$LINENO" 5 -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_small" >&5 -printf '%s\n' "$enable_small" >&6; } - if test "x$enable_small" = xyes; then - COND_SMALL_TRUE= - COND_SMALL_FALSE='#' -else - COND_SMALL_TRUE='#' - COND_SMALL_FALSE= -fi - - - -############# -# Threading # -############# - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if threading support is wanted" >&5 -printf %s "checking if threading support is wanted... " >&6; } -# Check whether --enable-threads was given. -if test ${enable_threads+y} -then : - enableval=$enable_threads; -else case e in #( - e) enable_threads=yes ;; -esac -fi - - -if test "x$enable_threads" = xyes; then - case $host_os in - mingw*) - case $host_cpu in - i?86) enable_threads=win95 ;; - *) enable_threads=vista ;; - esac - ;; - *) - enable_threads=posix - ;; - esac -fi - -case $enable_threads in - posix | win95 | vista) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes, $enable_threads" >&5 -printf '%s\n' "yes, $enable_threads" >&6; } - ;; - no) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "--enable-threads only accepts 'yes', 'no', 'posix', 'win95', or 'vista'" "$LINENO" 5 - ;; -esac - -# We use the actual result a little later. - - -######################### -# Assumed amount of RAM # -######################### - -# We use 128 MiB as default, because it will allow decompressing files -# created with "xz -9". It would be slightly safer to guess a lower value, -# but most systems, on which we don't have any way to determine the amount -# of RAM, will probably have at least 128 MiB of RAM. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how much RAM to assume if the real amount is unknown" >&5 -printf %s "checking how much RAM to assume if the real amount is unknown... " >&6; } -# Check whether --enable-assume-ram was given. -if test ${enable_assume_ram+y} -then : - enableval=$enable_assume_ram; -else case e in #( - e) enable_assume_ram=128 ;; -esac -fi - -assume_ram_check=`echo "$enable_assume_ram" | tr -d 0123456789` -if test -z "$enable_assume_ram" || test -n "$assume_ram_check"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "--enable-assume-ram accepts only an integer argument" "$LINENO" 5 -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_assume_ram MiB" >&5 -printf '%s\n' "$enable_assume_ram MiB" >&6; } - -printf '%s\n' "#define ASSUME_RAM $enable_assume_ram" >>confdefs.h - - - -######################### -# Components to install # -######################### - -# Check whether --enable-xz was given. -if test ${enable_xz+y} -then : - enableval=$enable_xz; -else case e in #( - e) enable_xz=yes ;; -esac -fi - - if test x$enable_xz != xno; then - COND_XZ_TRUE= - COND_XZ_FALSE='#' -else - COND_XZ_TRUE='#' - COND_XZ_FALSE= -fi - - -# Check whether --enable-xzdec was given. -if test ${enable_xzdec+y} -then : - enableval=$enable_xzdec; -else case e in #( - e) enable_xzdec=yes ;; -esac -fi - -test "x$enable_decoders" = xno && enable_xzdec=no - if test x$enable_xzdec != xno; then - COND_XZDEC_TRUE= - COND_XZDEC_FALSE='#' -else - COND_XZDEC_TRUE='#' - COND_XZDEC_FALSE= -fi - - -# Check whether --enable-lzmadec was given. -if test ${enable_lzmadec+y} -then : - enableval=$enable_lzmadec; -else case e in #( - e) enable_lzmadec=yes ;; -esac -fi - -test "x$enable_decoder_lzma1" = xno && enable_lzmadec=no - if test x$enable_lzmadec != xno; then - COND_LZMADEC_TRUE= - COND_LZMADEC_FALSE='#' -else - COND_LZMADEC_TRUE='#' - COND_LZMADEC_FALSE= -fi - - -# Check whether --enable-lzmainfo was given. -if test ${enable_lzmainfo+y} -then : - enableval=$enable_lzmainfo; -else case e in #( - e) enable_lzmainfo=yes ;; -esac -fi - -test "x$enable_decoder_lzma1" = xno && enable_lzmainfo=no - if test x$enable_lzmainfo != xno; then - COND_LZMAINFO_TRUE= - COND_LZMAINFO_FALSE='#' -else - COND_LZMAINFO_TRUE='#' - COND_LZMAINFO_FALSE= -fi - - -# Check whether --enable-lzma-links was given. -if test ${enable_lzma_links+y} -then : - enableval=$enable_lzma_links; -else case e in #( - e) enable_lzma_links=yes ;; -esac -fi - - if test x$enable_lzma_links != xno; then - COND_LZMALINKS_TRUE= - COND_LZMALINKS_FALSE='#' -else - COND_LZMALINKS_TRUE='#' - COND_LZMALINKS_FALSE= -fi - - -# Check whether --enable-doc was given. -if test ${enable_doc+y} -then : - enableval=$enable_doc; -else case e in #( - e) enable_doc=yes ;; -esac -fi - - if test x$enable_doc != xno; then - COND_DOC_TRUE= - COND_DOC_FALSE='#' -else - COND_DOC_TRUE='#' - COND_DOC_FALSE= -fi - - -# Check whether --enable-doxygen was given. -if test ${enable_doxygen+y} -then : - enableval=$enable_doxygen; -else case e in #( - e) enable_doxygen=no ;; -esac -fi - - if test x$enable_doxygen != xno; then - COND_DOXYGEN_TRUE= - COND_DOXYGEN_FALSE='#' -else - COND_DOXYGEN_TRUE='#' - COND_DOXYGEN_FALSE= -fi - - - -############## -# Sandboxing # -############## - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if sandboxing should be used" >&5 -printf %s "checking if sandboxing should be used... " >&6; } -# Check whether --enable-sandbox was given. -if test ${enable_sandbox+y} -then : - enableval=$enable_sandbox; -else case e in #( - e) enable_sandbox=auto ;; -esac -fi - -case $enable_xzdec-$enable_xz-$enable_sandbox in - no-no-*) - enable_sandbox=no - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, --disable-xz and --disable-xzdec was used" >&5 -printf '%s\n' "no, --disable-xz and --disable-xzdec was used" >&6; } - ;; - *-*-auto) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: maybe (autodetect)" >&5 -printf '%s\n' "maybe (autodetect)" >&6; } - ;; - *-*-no | *-*-capsicum | *-*-pledge | *-*-landlock) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_sandbox" >&5 -printf '%s\n' "$enable_sandbox" >&6; } - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "--enable-sandbox only accepts 'auto', 'no', 'capsicum', 'pledge', or 'landlock'." "$LINENO" 5 - ;; -esac - - -############################################################################### -# Checks for programs. -############################################################################### - - - -# We don't use "subdir-objects" yet because it breaks "make distclean" when -# dependencies are enabled (as of Automake 1.14.1) due to this bug: -# https://debbugs.gnu.org/cgi/bugreport.cgi?bug=17354 -# The -Wno-unsupported is used to silence warnings about missing -# "subdir-objects". -#AM_INIT_AUTOMAKE([1.12 foreign tar-v7 filename-length-max=99 -Wno-unsupported]) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -printf %s "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -printf '%s\n' "no, using $LN_S" >&6; } -fi - - - - - - - - - - - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_CC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -printf '%s\n' "$CC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_CC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -printf '%s\n' "$ac_ct_CC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_CC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -printf '%s\n' "$CC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_CC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - if test "$as_dir$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir$ac_word${1+' '}$@" - fi -fi -fi ;; -esac -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -printf '%s\n' "$CC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_CC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -printf '%s\n' "$CC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_CC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -printf '%s\n' "$ac_ct_CC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}clang", so it can be a program name with args. -set dummy ${ac_tool_prefix}clang; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_CC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}clang" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -printf '%s\n' "$CC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "clang", so it can be a program name with args. -set dummy clang; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_CC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="clang" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -printf '%s\n' "$ac_ct_CC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -fi - - -test -z "$CC" && { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See 'config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion -version; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -printf %s "checking whether the C compiler works... " >&6; } -ac_link_default=`printf '%s\n' "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -then : - # Autoconf-2.13 could set the ac_cv_exeext variable to 'no'. -# So ignore a value of 'no', otherwise this would lead to 'EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test ${ac_cv_exeext+y} && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an '-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else case e in #( - e) ac_file='' ;; -esac -fi -if test -z "$ac_file" -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -printf '%s\n' "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See 'config.log' for more details" "$LINENO" 5; } -else case e in #( - e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -printf %s "checking for C compiler default output file name... " >&6; } -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -printf '%s\n' "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -printf %s "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -then : - # If both 'conftest.exe' and 'conftest' are 'present' (well, observable) -# catch 'conftest.exe'. For instance with Cygwin, 'ls conftest' will -# work properly (i.e., refer to 'conftest.exe'), while it won't with -# 'rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else case e in #( - e) { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See 'config.log' for more details" "$LINENO" 5; } ;; -esac -fi -rm -f conftest conftest$ac_cv_exeext -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -printf '%s\n' "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main (void) -{ -FILE *f = fopen ("conftest.out", "w"); - if (!f) - return 1; - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -printf %s "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error 77 "cannot run C compiled programs. -If you meant to cross compile, use '--host'. -See 'config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -printf '%s\n' "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext \ - conftest.o conftest.obj conftest.out -ac_clean_files=$ac_clean_files_save -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -printf %s "checking for suffix of object files... " >&6; } -if test ${ac_cv_objext+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -printf '%s\n' "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else case e in #( - e) printf '%s\n' "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See 'config.log' for more details" "$LINENO" 5; } ;; -esac -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -printf '%s\n' "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports GNU C" >&5 -printf %s "checking whether the compiler supports GNU C... " >&6; } -if test ${ac_cv_c_compiler_gnu+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_compiler_gnu=yes -else case e in #( - e) ac_compiler_gnu=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -printf '%s\n' "$ac_cv_c_compiler_gnu" >&6; } -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+y} -ac_save_CFLAGS=$CFLAGS -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -printf %s "checking whether $CC accepts -g... " >&6; } -if test ${ac_cv_prog_cc_g+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_prog_cc_g=yes -else case e in #( - e) CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - -else case e in #( - e) ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -printf '%s\n' "$ac_cv_prog_cc_g" >&6; } -if test $ac_test_CFLAGS; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -ac_prog_cc_stdc=no -if test x$ac_prog_cc_stdc = xno -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C23 features" >&5 -printf %s "checking for $CC option to enable C23 features... " >&6; } -if test ${ac_cv_prog_cc_c23+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c23=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_c_conftest_c23_program -_ACEOF -for ac_arg in '' -std=gnu23 -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_prog_cc_c23=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam - test "x$ac_cv_prog_cc_c23" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac -fi - -if test "x$ac_cv_prog_cc_c23" = xno -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -printf '%s\n' "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c23" = x -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -printf '%s\n' "none needed" >&6; } -else case e in #( - e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c23" >&5 -printf '%s\n' "$ac_cv_prog_cc_c23" >&6; } - CC="$CC $ac_cv_prog_cc_c23" ;; -esac -fi - ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c23 - ac_prog_cc_stdc=c23 ;; -esac -fi -fi -if test x$ac_prog_cc_stdc = xno -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C11 features" >&5 -printf %s "checking for $CC option to enable C11 features... " >&6; } -if test ${ac_cv_prog_cc_c11+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c11=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_c_conftest_c11_program -_ACEOF -for ac_arg in '' -std=gnu11 -std:c11 -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_prog_cc_c11=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam - test "x$ac_cv_prog_cc_c11" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac -fi - -if test "x$ac_cv_prog_cc_c11" = xno -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -printf '%s\n' "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c11" = x -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -printf '%s\n' "none needed" >&6; } -else case e in #( - e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5 -printf '%s\n' "$ac_cv_prog_cc_c11" >&6; } - CC="$CC $ac_cv_prog_cc_c11" ;; -esac -fi - ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c11 - ac_prog_cc_stdc=c11 ;; -esac -fi -fi -if test x$ac_prog_cc_stdc = xno -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C99 features" >&5 -printf %s "checking for $CC option to enable C99 features... " >&6; } -if test ${ac_cv_prog_cc_c99+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c99=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_c_conftest_c99_program -_ACEOF -for ac_arg in '' -std=gnu99 -std=c99 -c99 -qlanglvl=extc1x -qlanglvl=extc99 -AC99 -D_STDC_C99= -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_prog_cc_c99=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam - test "x$ac_cv_prog_cc_c99" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac -fi - -if test "x$ac_cv_prog_cc_c99" = xno -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -printf '%s\n' "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c99" = x -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -printf '%s\n' "none needed" >&6; } -else case e in #( - e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 -printf '%s\n' "$ac_cv_prog_cc_c99" >&6; } - CC="$CC $ac_cv_prog_cc_c99" ;; -esac -fi - ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 - ac_prog_cc_stdc=c99 ;; -esac -fi -fi -if test x$ac_prog_cc_stdc = xno -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C89 features" >&5 -printf %s "checking for $CC option to enable C89 features... " >&6; } -if test ${ac_cv_prog_cc_c89+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_c_conftest_c89_program -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC ;; -esac -fi - -if test "x$ac_cv_prog_cc_c89" = xno -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -printf '%s\n' "unsupported" >&6; } -else case e in #( - e) if test "x$ac_cv_prog_cc_c89" = x -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -printf '%s\n' "none needed" >&6; } -else case e in #( - e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -printf '%s\n' "$ac_cv_prog_cc_c89" >&6; } - CC="$CC $ac_cv_prog_cc_c89" ;; -esac -fi - ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 - ac_prog_cc_stdc=c89 ;; -esac -fi -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -if test x$ac_cv_prog_cc_c99 = xno ; then - as_fn_error $? "No C99 compiler was found." "$LINENO" 5 -fi - -#AM_PROG_CC_C_O -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 -printf %s "checking whether ${MAKE-make} supports the include directive... " >&6; } -cat > confinc.mk << 'END' -am__doit: - @echo this is the am__doit target >confinc.out -.PHONY: am__doit -END -am__include="#" -am__quote= -# BSD make does it like this. -echo '.include "confinc.mk" # ignored' > confmf.BSD -# Other make implementations (GNU, Solaris 10, AIX) do it like this. -echo 'include confinc.mk # ignored' > confmf.GNU -_am_result=no -for s in GNU BSD; do - { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 - (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - case $?:`cat confinc.out 2>/dev/null` in #( - '0:this is the am__doit target') : - case $s in #( - BSD) : - am__include='.include' am__quote='"' ;; #( - *) : - am__include='include' am__quote='' ;; -esac ;; #( - *) : - ;; -esac - if test "$am__include" != "#"; then - _am_result="yes ($s style)" - break - fi -done -rm -f confinc.* confmf.* -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 -printf '%s\n' "${_am_result}" >&6; } - -# Check whether --enable-dependency-tracking was given. -if test ${enable_dependency_tracking+y} -then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - -# By default we simply use the C compiler to build assembly code. - -test "${CCAS+set}" = set || CCAS=$CC -test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS - - - -depcc="$CCAS" am_compiler_list= - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -printf %s "checking dependency style of $depcc... " >&6; } -if test ${am_cv_CCAS_dependencies_compiler_type+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CCAS_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thus: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CCAS_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CCAS_dependencies_compiler_type=none -fi - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5 -printf '%s\n' "$am_cv_CCAS_dependencies_compiler_type" >&6; } -CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then - am__fastdepCCAS_TRUE= - am__fastdepCCAS_FALSE='#' -else - am__fastdepCCAS_TRUE='#' - am__fastdepCCAS_FALSE= -fi - - - -ac_header= ac_cache= -for ac_item in $ac_header_c_list -do - if test $ac_cache; then - ac_fn_c_check_header_compile "$LINENO" $ac_header ac_cv_header_$ac_cache "$ac_includes_default" - if eval test \"x\$ac_cv_header_$ac_cache\" = xyes; then - printf '%s\n' "#define $ac_item 1" >> confdefs.h - fi - ac_header= ac_cache= - elif test $ac_header; then - ac_cache=$ac_item - else - ac_header=$ac_item - fi -done - - - - - - - - -if test $ac_cv_header_stdlib_h = yes && test $ac_cv_header_string_h = yes -then : - -printf '%s\n' "#define STDC_HEADERS 1" >>confdefs.h - -fi - - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 -printf %s "checking whether it is safe to define __EXTENSIONS__... " >&6; } -if test ${ac_cv_safe_to_define___extensions__+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -# define __EXTENSIONS__ 1 - $ac_includes_default -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_safe_to_define___extensions__=yes -else case e in #( - e) ac_cv_safe_to_define___extensions__=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 -printf '%s\n' "$ac_cv_safe_to_define___extensions__" >&6; } - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether _XOPEN_SOURCE should be defined" >&5 -printf %s "checking whether _XOPEN_SOURCE should be defined... " >&6; } -if test ${ac_cv_should_define__xopen_source+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_should_define__xopen_source=no - if test $ac_cv_header_wchar_h = yes -then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - #include - mbstate_t x; -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - #define _XOPEN_SOURCE 500 - #include - mbstate_t x; -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_should_define__xopen_source=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext -fi ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_should_define__xopen_source" >&5 -printf '%s\n' "$ac_cv_should_define__xopen_source" >&6; } - - printf '%s\n' "#define _ALL_SOURCE 1" >>confdefs.h - - printf '%s\n' "#define _COSMO_SOURCE 1" >>confdefs.h - - printf '%s\n' "#define _DARWIN_C_SOURCE 1" >>confdefs.h - - printf '%s\n' "#define _GNU_SOURCE 1" >>confdefs.h - - printf '%s\n' "#define _HPUX_ALT_XOPEN_SOCKET_API 1" >>confdefs.h - - printf '%s\n' "#define _NETBSD_SOURCE 1" >>confdefs.h - - printf '%s\n' "#define _OPENBSD_SOURCE 1" >>confdefs.h - - printf '%s\n' "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h - - printf '%s\n' "#define __STDC_WANT_IEC_60559_ATTRIBS_EXT__ 1" >>confdefs.h - - printf '%s\n' "#define __STDC_WANT_IEC_60559_BFP_EXT__ 1" >>confdefs.h - - printf '%s\n' "#define __STDC_WANT_IEC_60559_DFP_EXT__ 1" >>confdefs.h - - printf '%s\n' "#define __STDC_WANT_IEC_60559_EXT__ 1" >>confdefs.h - - printf '%s\n' "#define __STDC_WANT_IEC_60559_FUNCS_EXT__ 1" >>confdefs.h - - printf '%s\n' "#define __STDC_WANT_IEC_60559_TYPES_EXT__ 1" >>confdefs.h - - printf '%s\n' "#define __STDC_WANT_LIB_EXT2__ 1" >>confdefs.h - - printf '%s\n' "#define __STDC_WANT_MATH_SPEC_FUNCS__ 1" >>confdefs.h - - printf '%s\n' "#define _TANDEM_SOURCE 1" >>confdefs.h - - if test $ac_cv_header_minix_config_h = yes -then : - MINIX=yes - printf '%s\n' "#define _MINIX 1" >>confdefs.h - - printf '%s\n' "#define _POSIX_SOURCE 1" >>confdefs.h - - printf '%s\n' "#define _POSIX_1_SOURCE 2" >>confdefs.h - -else case e in #( - e) MINIX= ;; -esac -fi - if test $ac_cv_safe_to_define___extensions__ = yes -then : - printf '%s\n' "#define __EXTENSIONS__ 1" >>confdefs.h - -fi - if test $ac_cv_should_define__xopen_source = yes -then : - printf '%s\n' "#define _XOPEN_SOURCE 500" >>confdefs.h - -fi - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -printf %s "checking for a sed that does not truncate output... " >&6; } -if test ${ac_cv_path_SED+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in sed gsed - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_SED" || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in #( -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -#( -*) - ac_count=0 - printf %s 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - printf '%s\n' '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -printf '%s\n' "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -printf %s "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test ${ac_cv_prog_CPP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) # Double quotes because $CC needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" cpp /lib/cpp - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO" -then : - -else case e in #( - e) # Broken: fails on valid input. -continue ;; -esac -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO" -then : - # Broken: success on invalid input. -continue -else case e in #( - e) # Passes both tests. -ac_preproc_ok=: -break ;; -esac -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of 'break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok -then : - break -fi - - done - ac_cv_prog_CPP=$CPP - ;; -esac -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -printf '%s\n' "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO" -then : - -else case e in #( - e) # Broken: fails on valid input. -continue ;; -esac -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO" -then : - # Broken: success on invalid input. -continue -else case e in #( - e) # Passes both tests. -ac_preproc_ok=: -break ;; -esac -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of 'break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok -then : - -else case e in #( - e) { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See 'config.log' for more details" "$LINENO" 5; } ;; -esac -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for egrep -e" >&5 -printf %s "checking for egrep -e... " >&6; } -if test ${ac_cv_path_EGREP_TRADITIONAL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -z "$EGREP_TRADITIONAL"; then - ac_path_EGREP_TRADITIONAL_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in grep ggrep - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP_TRADITIONAL="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP_TRADITIONAL" || continue -# Check for GNU ac_path_EGREP_TRADITIONAL and select it if it is found. - # Check for GNU $ac_path_EGREP_TRADITIONAL -case `"$ac_path_EGREP_TRADITIONAL" --version 2>&1` in #( -*GNU*) - ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_found=:;; -#( -*) - ac_count=0 - printf %s 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - printf '%s\n' 'EGREP_TRADITIONAL' >> "conftest.nl" - "$ac_path_EGREP_TRADITIONAL" -E 'EGR(EP|AC)_TRADITIONAL$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_TRADITIONAL_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" - ac_path_EGREP_TRADITIONAL_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_TRADITIONAL_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP_TRADITIONAL"; then - : - fi -else - ac_cv_path_EGREP_TRADITIONAL=$EGREP_TRADITIONAL -fi - - if test "$ac_cv_path_EGREP_TRADITIONAL" -then : - ac_cv_path_EGREP_TRADITIONAL="$ac_cv_path_EGREP_TRADITIONAL -E" -else case e in #( - e) if test -z "$EGREP_TRADITIONAL"; then - ac_path_EGREP_TRADITIONAL_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in egrep - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP_TRADITIONAL="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP_TRADITIONAL" || continue -# Check for GNU ac_path_EGREP_TRADITIONAL and select it if it is found. - # Check for GNU $ac_path_EGREP_TRADITIONAL -case `"$ac_path_EGREP_TRADITIONAL" --version 2>&1` in #( -*GNU*) - ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_found=:;; -#( -*) - ac_count=0 - printf %s 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - printf '%s\n' 'EGREP_TRADITIONAL' >> "conftest.nl" - "$ac_path_EGREP_TRADITIONAL" 'EGR(EP|AC)_TRADITIONAL$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_TRADITIONAL_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" - ac_path_EGREP_TRADITIONAL_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_TRADITIONAL_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP_TRADITIONAL"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP_TRADITIONAL=$EGREP_TRADITIONAL -fi - ;; -esac -fi ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP_TRADITIONAL" >&5 -printf '%s\n' "$ac_cv_path_EGREP_TRADITIONAL" >&6; } - EGREP_TRADITIONAL=$ac_cv_path_EGREP_TRADITIONAL - -case $enable_threads in #( - posix) : - - echo - echo "POSIX threading support:" - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ax_pthread_ok=no - -# We used to check for pthread.h first, but this fails if pthread.h -# requires special compiler flags (e.g. on Tru64 or Sequent). -# It gets checked for in the link test anyway. - -# First of all, check if the user has set any of the PTHREAD_LIBS, -# etcetera environment variables, and if threads linking works using -# them: -if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then - ax_pthread_save_CC="$CC" - ax_pthread_save_CFLAGS="$CFLAGS" - ax_pthread_save_LIBS="$LIBS" - if test "x$PTHREAD_CC" != "x" -then : - CC="$PTHREAD_CC" -fi - if test "x$PTHREAD_CXX" != "x" -then : - CXX="$PTHREAD_CXX" -fi - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - LIBS="$PTHREAD_LIBS $LIBS" - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS" >&5 -printf %s "checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char pthread_join (void); -int -main (void) -{ -return pthread_join (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ax_pthread_ok=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5 -printf '%s\n' "$ax_pthread_ok" >&6; } - if test "x$ax_pthread_ok" = "xno"; then - PTHREAD_LIBS="" - PTHREAD_CFLAGS="" - fi - CC="$ax_pthread_save_CC" - CFLAGS="$ax_pthread_save_CFLAGS" - LIBS="$ax_pthread_save_LIBS" -fi - -# We must check for the threads library under a number of different -# names; the ordering is very important because some systems -# (e.g. DEC) have both -lpthread and -lpthreads, where one of the -# libraries is broken (non-POSIX). - -# Create a list of thread flags to try. Items with a "," contain both -# C compiler flags (before ",") and linker flags (after ","). Other items -# starting with a "-" are C compiler flags, and remaining items are -# library names, except for "none" which indicates that we try without -# any flags at all, and "pthread-config" which is a program returning -# the flags for the Pth emulation library. - -ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" - -# The ordering *is* (sometimes) important. Some notes on the -# individual items follow: - -# pthreads: AIX (must check this before -lpthread) -# none: in case threads are in libc; should be tried before -Kthread and -# other compiler flags to prevent continual compiler warnings -# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) -# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64 -# (Note: HP C rejects this with "bad form for `-t' option") -# -pthreads: Solaris/gcc (Note: HP C also rejects) -# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it -# doesn't hurt to check since this sometimes defines pthreads and -# -D_REENTRANT too), HP C (must be checked before -lpthread, which -# is present but should not be used directly; and before -mthreads, -# because the compiler interprets this as "-mt" + "-hreads") -# -mthreads: Mingw32/gcc, Lynx/gcc -# pthread: Linux, etcetera -# --thread-safe: KAI C++ -# pthread-config: use pthread-config program (for GNU Pth library) - -case $host_os in - - freebsd*) - - # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) - # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) - - ax_pthread_flags="-kthread lthread $ax_pthread_flags" - ;; - - hpux*) - - # From the cc(1) man page: "[-mt] Sets various -D flags to enable - # multi-threading and also sets -lpthread." - - ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags" - ;; - - openedition*) - - # IBM z/OS requires a feature-test macro to be defined in order to - # enable POSIX threads at all, so give the user a hint if this is - # not set. (We don't define these ourselves, as they can affect - # other portions of the system API in unpredictable ways.) - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS) - AX_PTHREAD_ZOS_MISSING -# endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP_TRADITIONAL "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1 -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&5 -printf '%s\n' "$as_me: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&2;} -fi -rm -rf conftest* - - ;; - - solaris*) - - # On Solaris (at least, for some versions), libc contains stubbed - # (non-functional) versions of the pthreads routines, so link-based - # tests will erroneously succeed. (N.B.: The stubs are missing - # pthread_cleanup_push, or rather a function called by this macro, - # so we could check for that, but who knows whether they'll stub - # that too in a future libc.) So we'll check first for the - # standard Solaris way of linking pthreads (-mt -lpthread). - - ax_pthread_flags="-mt,-lpthread pthread $ax_pthread_flags" - ;; -esac - -# Are we compiling with Clang? - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether $CC is Clang" >&5 -printf %s "checking whether $CC is Clang... " >&6; } -if test ${ax_cv_PTHREAD_CLANG+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ax_cv_PTHREAD_CLANG=no - # Note that Autoconf sets GCC=yes for Clang as well as GCC - if test "x$GCC" = "xyes"; then - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Note: Clang 2.7 lacks __clang_[a-z]+__ */ -# if defined(__clang__) && defined(__llvm__) - AX_PTHREAD_CC_IS_CLANG -# endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP_TRADITIONAL "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1 -then : - ax_cv_PTHREAD_CLANG=yes -fi -rm -rf conftest* - - fi - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG" >&5 -printf '%s\n' "$ax_cv_PTHREAD_CLANG" >&6; } -ax_pthread_clang="$ax_cv_PTHREAD_CLANG" - - -# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC) - -# Note that for GCC and Clang -pthread generally implies -lpthread, -# except when -nostdlib is passed. -# This is problematic using libtool to build C++ shared libraries with pthread: -# [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=25460 -# [2] https://bugzilla.redhat.com/show_bug.cgi?id=661333 -# [3] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=468555 -# To solve this, first try -pthread together with -lpthread for GCC - -if test "x$GCC" = "xyes" -then : - ax_pthread_flags="-pthread,-lpthread -pthread -pthreads $ax_pthread_flags" -fi - -# Clang takes -pthread (never supported any other flag), but we'll try with -lpthread first - -if test "x$ax_pthread_clang" = "xyes" -then : - ax_pthread_flags="-pthread,-lpthread -pthread" -fi - - -# The presence of a feature test macro requesting re-entrant function -# definitions is, on some systems, a strong hint that pthreads support is -# correctly enabled - -case $host_os in - darwin* | hpux* | linux* | osf* | solaris*) - ax_pthread_check_macro="_REENTRANT" - ;; - - aix*) - ax_pthread_check_macro="_THREAD_SAFE" - ;; - - *) - ax_pthread_check_macro="--" - ;; -esac -if test "x$ax_pthread_check_macro" = "x--" -then : - ax_pthread_check_cond=0 -else case e in #( - e) ax_pthread_check_cond="!defined($ax_pthread_check_macro)" ;; -esac -fi - - -if test "x$ax_pthread_ok" = "xno"; then -for ax_pthread_try_flag in $ax_pthread_flags; do - - case $ax_pthread_try_flag in - none) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether pthreads work without any flags" >&5 -printf %s "checking whether pthreads work without any flags... " >&6; } - ;; - - *,*) - PTHREAD_CFLAGS=`echo $ax_pthread_try_flag | sed "s/^\(.*\),\(.*\)$/\1/"` - PTHREAD_LIBS=`echo $ax_pthread_try_flag | sed "s/^\(.*\),\(.*\)$/\2/"` - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with \"$PTHREAD_CFLAGS\" and \"$PTHREAD_LIBS\"" >&5 -printf %s "checking whether pthreads work with \"$PTHREAD_CFLAGS\" and \"$PTHREAD_LIBS\"... " >&6; } - ;; - - -*) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $ax_pthread_try_flag" >&5 -printf %s "checking whether pthreads work with $ax_pthread_try_flag... " >&6; } - PTHREAD_CFLAGS="$ax_pthread_try_flag" - ;; - - pthread-config) - # Extract the first word of "pthread-config", so it can be a program name with args. -set dummy pthread-config; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ax_pthread_config+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ax_pthread_config"; then - ac_cv_prog_ax_pthread_config="$ax_pthread_config" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ax_pthread_config="yes" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_ax_pthread_config" && ac_cv_prog_ax_pthread_config="no" -fi ;; -esac -fi -ax_pthread_config=$ac_cv_prog_ax_pthread_config -if test -n "$ax_pthread_config"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_config" >&5 -printf '%s\n' "$ax_pthread_config" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - if test "x$ax_pthread_config" = "xno" -then : - continue -fi - PTHREAD_CFLAGS="`pthread-config --cflags`" - PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" - ;; - - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$ax_pthread_try_flag" >&5 -printf %s "checking for the pthreads library -l$ax_pthread_try_flag... " >&6; } - PTHREAD_LIBS="-l$ax_pthread_try_flag" - ;; - esac - - ax_pthread_save_CFLAGS="$CFLAGS" - ax_pthread_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - LIBS="$PTHREAD_LIBS $LIBS" - - # Check for various functions. We must include pthread.h, - # since some functions may be macros. (On the Sequent, we - # need a special flag -Kthread to make this header compile.) - # We check for pthread_join because it is in -lpthread on IRIX - # while pthread_create is in libc. We check for pthread_attr_init - # due to DEC craziness with -lpthreads. We check for - # pthread_cleanup_push because it is one of the few pthread - # functions on Solaris that doesn't have a non-functional libc stub. - # We try pthread_create on general principles. - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -# if $ax_pthread_check_cond -# error "$ax_pthread_check_macro must be defined" -# endif - static void *some_global = NULL; - static void routine(void *a) - { - /* To avoid any unused-parameter or - unused-but-set-parameter warning. */ - some_global = a; - } - static void *start_routine(void *a) { return a; } -int -main (void) -{ -pthread_t th; pthread_attr_t attr; - pthread_create(&th, 0, start_routine, 0); - pthread_join(th, 0); - pthread_attr_init(&attr); - pthread_cleanup_push(routine, 0); - pthread_cleanup_pop(0) /* ; */ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ax_pthread_ok=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - - CFLAGS="$ax_pthread_save_CFLAGS" - LIBS="$ax_pthread_save_LIBS" - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5 -printf '%s\n' "$ax_pthread_ok" >&6; } - if test "x$ax_pthread_ok" = "xyes" -then : - break -fi - - PTHREAD_LIBS="" - PTHREAD_CFLAGS="" -done -fi - - -# Clang needs special handling, because older versions handle the -pthread -# option in a rather... idiosyncratic way - -if test "x$ax_pthread_clang" = "xyes"; then - - # Clang takes -pthread; it has never supported any other flag - - # (Note 1: This will need to be revisited if a system that Clang - # supports has POSIX threads in a separate library. This tends not - # to be the way of modern systems, but it's conceivable.) - - # (Note 2: On some systems, notably Darwin, -pthread is not needed - # to get POSIX threads support; the API is always present and - # active. We could reasonably leave PTHREAD_CFLAGS empty. But - # -pthread does define _REENTRANT, and while the Darwin headers - # ignore this macro, third-party headers might not.) - - # However, older versions of Clang make a point of warning the user - # that, in an invocation where only linking and no compilation is - # taking place, the -pthread option has no effect ("argument unused - # during compilation"). They expect -pthread to be passed in only - # when source code is being compiled. - # - # Problem is, this is at odds with the way Automake and most other - # C build frameworks function, which is that the same flags used in - # compilation (CFLAGS) are also used in linking. Many systems - # supported by AX_PTHREAD require exactly this for POSIX threads - # support, and in fact it is often not straightforward to specify a - # flag that is used only in the compilation phase and not in - # linking. Such a scenario is extremely rare in practice. - # - # Even though use of the -pthread flag in linking would only print - # a warning, this can be a nuisance for well-run software projects - # that build with -Werror. So if the active version of Clang has - # this misfeature, we search for an option to squash it. - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread" >&5 -printf %s "checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread... " >&6; } -if test ${ax_cv_PTHREAD_CLANG_NO_WARN_FLAG+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown - # Create an alternate version of $ac_link that compiles and - # links in two steps (.c -> .o, .o -> exe) instead of one - # (.c -> exe), because the warning occurs only in the second - # step - ax_pthread_save_ac_link="$ac_link" - ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g' - ax_pthread_link_step=`printf '%s\n' "$ac_link" | sed "$ax_pthread_sed"` - ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)" - ax_pthread_save_CFLAGS="$CFLAGS" - for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do - if test "x$ax_pthread_try" = "xunknown" -then : - break -fi - CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS" - ac_link="$ax_pthread_save_ac_link" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int main(void){return 0;} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ac_link="$ax_pthread_2step_ac_link" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int main(void){return 0;} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - break -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - done - ac_link="$ax_pthread_save_ac_link" - CFLAGS="$ax_pthread_save_CFLAGS" - if test "x$ax_pthread_try" = "x" -then : - ax_pthread_try=no -fi - ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try" - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&5 -printf '%s\n' "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&6; } - - case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in - no | unknown) ;; - *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;; - esac - -fi # $ax_pthread_clang = yes - - - -# Various other checks: -if test "x$ax_pthread_ok" = "xyes"; then - ax_pthread_save_CFLAGS="$CFLAGS" - ax_pthread_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - LIBS="$PTHREAD_LIBS $LIBS" - - # Detect AIX lossage: JOINABLE attribute is called UNDETACHED. - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5 -printf %s "checking for joinable pthread attribute... " >&6; } -if test ${ax_cv_PTHREAD_JOINABLE_ATTR+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ax_cv_PTHREAD_JOINABLE_ATTR=unknown - for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main (void) -{ -int attr = $ax_pthread_attr; return attr /* ; */ - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - done - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_JOINABLE_ATTR" >&5 -printf '%s\n' "$ax_cv_PTHREAD_JOINABLE_ATTR" >&6; } - if test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \ - test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \ - test "x$ax_pthread_joinable_attr_defined" != "xyes" -then : - -printf '%s\n' "#define PTHREAD_CREATE_JOINABLE $ax_cv_PTHREAD_JOINABLE_ATTR" >>confdefs.h - - ax_pthread_joinable_attr_defined=yes - -fi - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether more special flags are required for pthreads" >&5 -printf %s "checking whether more special flags are required for pthreads... " >&6; } -if test ${ax_cv_PTHREAD_SPECIAL_FLAGS+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ax_cv_PTHREAD_SPECIAL_FLAGS=no - case $host_os in - solaris*) - ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS" - ;; - esac - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_SPECIAL_FLAGS" >&5 -printf '%s\n' "$ax_cv_PTHREAD_SPECIAL_FLAGS" >&6; } - if test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \ - test "x$ax_pthread_special_flags_added" != "xyes" -then : - PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS" - ax_pthread_special_flags_added=yes -fi - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for PTHREAD_PRIO_INHERIT" >&5 -printf %s "checking for PTHREAD_PRIO_INHERIT... " >&6; } -if test ${ax_cv_PTHREAD_PRIO_INHERIT+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main (void) -{ -int i = PTHREAD_PRIO_INHERIT; - return i; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ax_cv_PTHREAD_PRIO_INHERIT=yes -else case e in #( - e) ax_cv_PTHREAD_PRIO_INHERIT=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_PRIO_INHERIT" >&5 -printf '%s\n' "$ax_cv_PTHREAD_PRIO_INHERIT" >&6; } - if test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \ - test "x$ax_pthread_prio_inherit_defined" != "xyes" -then : - -printf '%s\n' "#define HAVE_PTHREAD_PRIO_INHERIT 1" >>confdefs.h - - ax_pthread_prio_inherit_defined=yes - -fi - - CFLAGS="$ax_pthread_save_CFLAGS" - LIBS="$ax_pthread_save_LIBS" - - # More AIX lossage: compile with *_r variant - if test "x$GCC" != "xyes"; then - case $host_os in - aix*) - case "x/$CC" in #( - x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6) : - #handle absolute path differently from PATH based program lookup - case "x$CC" in #( - x/*) : - - if as_fn_executable_p ${CC}_r -then : - PTHREAD_CC="${CC}_r" -fi - if test "x${CXX}" != "x" -then : - if as_fn_executable_p ${CXX}_r -then : - PTHREAD_CXX="${CXX}_r" -fi -fi - ;; #( - *) : - - for ac_prog in ${CC}_r -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_PTHREAD_CC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$PTHREAD_CC"; then - ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_PTHREAD_CC="$ac_prog" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -PTHREAD_CC=$ac_cv_prog_PTHREAD_CC -if test -n "$PTHREAD_CC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CC" >&5 -printf '%s\n' "$PTHREAD_CC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - test -n "$PTHREAD_CC" && break -done -test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" - - if test "x${CXX}" != "x" -then : - for ac_prog in ${CXX}_r -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_PTHREAD_CXX+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$PTHREAD_CXX"; then - ac_cv_prog_PTHREAD_CXX="$PTHREAD_CXX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_PTHREAD_CXX="$ac_prog" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -PTHREAD_CXX=$ac_cv_prog_PTHREAD_CXX -if test -n "$PTHREAD_CXX"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CXX" >&5 -printf '%s\n' "$PTHREAD_CXX" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - test -n "$PTHREAD_CXX" && break -done -test -n "$PTHREAD_CXX" || PTHREAD_CXX="$CXX" - -fi - - ;; -esac - ;; #( - *) : - ;; -esac - ;; - esac - fi -fi - -test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" -test -n "$PTHREAD_CXX" || PTHREAD_CXX="$CXX" - - - - - - -# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: -if test "x$ax_pthread_ok" = "xyes"; then - : - : -else - ax_pthread_ok=no - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - LIBS="$PTHREAD_LIBS $LIBS" - AM_CFLAGS="$AM_CFLAGS $PTHREAD_CFLAGS" - - - -printf '%s\n' "#define MYTHREAD_POSIX 1" >>confdefs.h - - - # This is nice to have but not mandatory. - OLD_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - ac_fn_c_check_func "$LINENO" "pthread_condattr_setclock" "ac_cv_func_pthread_condattr_setclock" -if test "x$ac_cv_func_pthread_condattr_setclock" = xyes -then : - printf '%s\n' "#define HAVE_PTHREAD_CONDATTR_SETCLOCK 1" >>confdefs.h - -fi - - CFLAGS=$OLD_CFLAGS - ;; #( - win95) : - - -printf '%s\n' "#define MYTHREAD_WIN95 1" >>confdefs.h - - ;; #( - vista) : - - -printf '%s\n' "#define MYTHREAD_VISTA 1" >>confdefs.h - - - ;; #( - *) : - ;; -esac - if test "x$enable_threads" != xno; then - COND_THREADS_TRUE= - COND_THREADS_FALSE='#' -else - COND_THREADS_TRUE='#' - COND_THREADS_FALSE= -fi - - -echo -echo "Initializing Libtool:" - - -case `pwd` in - *\ * | *\ *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -printf '%s\n' "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.5.4' -macro_revision='2.5.4' - - - - - - - - - - - - - - -ltmain=$ac_aux_dir/ltmain.sh - -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -printf %s "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case $ECHO in - printf*) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -printf '%s\n' "printf" >&6; } ;; - print*) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -printf '%s\n' "print -r" >&6; } ;; - *) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -printf '%s\n' "cat" >&6; } ;; -esac - - - - - - - - - - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -printf %s "checking for a sed that does not truncate output... " >&6; } -if test ${ac_cv_path_SED+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in sed gsed - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_SED" || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in #( -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -#( -*) - ac_count=0 - printf %s 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - printf '%s\n' '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -printf '%s\n' "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -printf %s "checking for grep that handles long lines and -e... " >&6; } -if test ${ac_cv_path_GREP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in grep ggrep - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in #( -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -#( -*) - ac_count=0 - printf %s 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - printf '%s\n' 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -printf '%s\n' "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -printf %s "checking for egrep... " >&6; } -if test ${ac_cv_path_EGREP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in egrep - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in #( -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -#( -*) - ac_count=0 - printf %s 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - printf '%s\n' 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -printf '%s\n' "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - EGREP_TRADITIONAL=$EGREP - ac_cv_path_EGREP_TRADITIONAL=$EGREP - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -printf %s "checking for fgrep... " >&6; } -if test ${ac_cv_path_FGREP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in fgrep - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_FGREP" || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in #( -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -#( -*) - ac_count=0 - printf %s 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - printf '%s\n' 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -printf '%s\n' "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - - - -# Check whether --with-gnu-ld was given. -if test ${with_gnu_ld+y} -then : - withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes -else case e in #( - e) with_gnu_ld=no ;; -esac -fi - -ac_prog=ld -if test yes = "$GCC"; then - # Check if gcc -print-prog-name=ld gives a path. - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -printf %s "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw* | *-*-windows*) - # gcc leaves a trailing carriage return, which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD=$ac_prog - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test yes = "$with_gnu_ld"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -printf %s "checking for GNU ld... " >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -printf %s "checking for non-GNU ld... " >&6; } -fi -if test ${lt_cv_path_LD+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -z "$LD"; then - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD=$ac_dir/$ac_prog - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -printf '%s\n' "$LD" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -printf %s "checking if the linker ($LD) is GNU ld... " >&6; } -if test ${lt_cv_prog_gnu_ld+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -printf '%s\n' "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -printf %s "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if test ${lt_cv_path_NM+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM=$NM -else - lt_nm_to_check=${ac_tool_prefix}nm - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/$lt_tmp_nm - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the 'sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty - case $build_os in - mingw* | windows*) lt_bad_file=conftest.nm/nofile ;; - *) lt_bad_file=/dev/null ;; - esac - case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in - *$lt_bad_file* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break 2 - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break 2 - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS=$lt_save_ifs - done - : ${lt_cv_path_NM=no} -fi ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -printf '%s\n' "$lt_cv_path_NM" >&6; } -if test no != "$lt_cv_path_NM"; then - NM=$lt_cv_path_NM -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_DUMPBIN+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -printf '%s\n' "$DUMPBIN" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_DUMPBIN+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -printf '%s\n' "$ac_ct_DUMPBIN" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols -headers" - ;; - *) - DUMPBIN=: - ;; - esac - fi - - if test : != "$DUMPBIN"; then - NM=$DUMPBIN - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -printf %s "checking the name lister ($NM) interface... " >&6; } -if test ${lt_cv_nm_interface+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -printf '%s\n' "$lt_cv_nm_interface" >&6; } - -# find the maximum length of command line arguments -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -printf %s "checking the maximum length of command line arguments... " >&6; } -if test ${lt_cv_sys_max_cmd_len+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) i=0 - teststring=ABCD - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu* | ironclad*) - # Under GNU Hurd and Ironclad, this test is not required because there - # is no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | windows* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test X`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test 17 != "$i" # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - ;; -esac -fi - -if test -n "$lt_cv_sys_max_cmd_len"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -printf '%s\n' "$lt_cv_sys_max_cmd_len" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none" >&5 -printf '%s\n' "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -printf %s "checking how to convert $build file names to $host format... " >&6; } -if test ${lt_cv_to_host_file_cmd+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) case $host in - *-*-mingw* ) - case $build in - *-*-mingw* | *-*-windows* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* | *-*-windows* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - ;; -esac -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -printf '%s\n' "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -printf %s "checking how to convert $build file names to toolchain format... " >&6; } -if test ${lt_cv_to_tool_file_cmd+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* | *-*-windows* ) - case $build in - *-*-mingw* | *-*-windows* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - ;; -esac -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -printf '%s\n' "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -printf %s "checking for $LD option to reload object files... " >&6; } -if test ${lt_cv_ld_reload_flag+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_ld_reload_flag='-r' ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -printf '%s\n' "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - cygwin* | mingw* | windows* | pw32* | cegcc*) - if test yes != "$GCC"; then - reload_cmds=false - fi - ;; - darwin*) - if test yes = "$GCC"; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -# Extract the first word of "file", so it can be a program name with args. -set dummy file; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_FILECMD+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$FILECMD"; then - ac_cv_prog_FILECMD="$FILECMD" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_FILECMD="file" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_prog_FILECMD" && ac_cv_prog_FILECMD=":" -fi ;; -esac -fi -FILECMD=$ac_cv_prog_FILECMD -if test -n "$FILECMD"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $FILECMD" >&5 -printf '%s\n' "$FILECMD" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_OBJDUMP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -printf '%s\n' "$OBJDUMP" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_OBJDUMP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -printf '%s\n' "$ac_ct_OBJDUMP" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -printf %s "checking how to recognize dependent libraries... " >&6; } -if test ${lt_cv_deplibs_check_method+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# 'unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'file_magic [[regex]]' -- check by looking for files in library path -# that responds to the $file_magic_cmd with a given extended regex. -# If you have 'file' or equivalent on your system and you're not sure -# whether 'pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='$FILECMD -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | windows* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64|pe-aarch64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly* | midnightbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=$FILECMD - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=$FILECMD - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -*-mlibc) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=$FILECMD - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -serenity*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -os2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -printf '%s\n' "$lt_cv_deplibs_check_method" >&6; } - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | windows* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_DLLTOOL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -printf '%s\n' "$DLLTOOL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_DLLTOOL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -printf '%s\n' "$ac_ct_DLLTOOL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -printf %s "checking how to associate runtime and link libraries... " >&6; } -if test ${lt_cv_sharedlib_from_linklib_cmd+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | windows* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh; - # decide which one to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd=$ECHO - ;; -esac - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -printf '%s\n' "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_RANLIB+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -printf '%s\n' "$RANLIB" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_RANLIB+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -printf '%s\n' "$ac_ct_RANLIB" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_AR+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -printf '%s\n' "$AR" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - test -n "$AR" && break - done -fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_AR+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AR="$ac_prog" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -printf '%s\n' "$ac_ct_AR" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -fi - -: ${AR=ar} - - - - - - -# Use ARFLAGS variable as AR's operation code to sync the variable naming with -# Automake. If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have -# higher priority because that's what people were doing historically (setting -# ARFLAGS for automake and AR_FLAGS for libtool). FIXME: Make the AR_FLAGS -# variable obsoleted/removed. - -test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr} -lt_ar_flags=$AR_FLAGS - - - - - - -# Make AR_FLAGS overridable by 'make ARFLAGS='. Don't try to run-time override -# by AR_FLAGS because that was never working and AR_FLAGS is about to die. - - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -printf %s "checking for archiver @FILE support... " >&6; } -if test ${lt_cv_ar_at_file+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -eq "$ac_status"; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -ne "$ac_status"; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -printf '%s\n' "$lt_cv_ar_at_file" >&6; } - -if test no = "$lt_cv_ar_at_file"; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_STRIP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -printf '%s\n' "$STRIP" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_STRIP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -printf '%s\n' "$ac_ct_STRIP" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - - - - - - - - - - - - - - - - -for ac_prog in gawk mawk nawk awk 'busybox awk' -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_AWK+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -printf '%s\n' "$AWK" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - test -n "$AWK" && break -done - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -printf %s "checking command to parse $NM output from $compiler object... " >&6; } -if test ${lt_cv_sys_global_symbol_pipe+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | windows* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test ia64 = "$host_cpu"; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BCDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Gets list of data symbols to import. - lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'" - # Adjust the below global symbol transforms to fixup imported variables. - lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" - lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" - lt_c_name_lib_hook="\ - -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ - -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" -else - # Disable hooks by default. - lt_cv_sys_global_symbol_to_import= - lt_cdecl_hook= - lt_c_name_hook= - lt_c_name_lib_hook= -fi - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="$SED -n"\ -$lt_cdecl_hook\ -" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\ -$lt_c_name_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" - -# Transform an extracted symbol line into symbol name with lib prefix and -# symbol address. -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\ -$lt_c_name_lib_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw* | windows*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function, - # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++ or ICC, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ -" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ -" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ -" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ -" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(void){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&5 - if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&5 && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS=conftstm.$ac_objext - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test yes = "$pipe_works"; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - ;; -esac -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -printf '%s\n' "failed" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -printf '%s\n' "ok" >&6; } -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -printf %s "checking for sysroot... " >&6; } - -# Check whether --with-sysroot was given. -if test ${with_sysroot+y} -then : - withval=$with_sysroot; -else case e in #( - e) with_sysroot=no ;; -esac -fi - - -lt_sysroot= -case $with_sysroot in #( - yes) - if test yes = "$GCC"; then - # Trim trailing / since we'll always append absolute paths and we want - # to avoid //, if only for less confusing output for the user. - lt_sysroot=`$CC --print-sysroot 2>/dev/null | $SED 's:/\+$::'` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 -printf '%s\n' "$with_sysroot" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -printf '%s\n' "${lt_sysroot:-no}" >&6; } - - - - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 -printf %s "checking for a working dd... " >&6; } -if test ${ac_cv_path_lt_DD+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -: ${lt_DD:=$DD} -if test -z "$lt_DD"; then - ac_path_lt_DD_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in dd - do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_lt_DD="$as_dir$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_lt_DD" || continue -if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: -fi - $ac_path_lt_DD_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_lt_DD"; then - : - fi -else - ac_cv_path_lt_DD=$lt_DD -fi - -rm -f conftest.i conftest2.i conftest.out ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 -printf '%s\n' "$ac_cv_path_lt_DD" >&6; } - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 -printf %s "checking how to truncate binary pipes... " >&6; } -if test ${lt_cv_truncate_bin+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -lt_cv_truncate_bin= -if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" -fi -rm -f conftest.i conftest2.i conftest.out -test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 -printf '%s\n' "$lt_cv_truncate_bin" >&6; } - - - - - - - -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -func_cc_basename () -{ - for cc_temp in $*""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac - done - func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -} - -# Check whether --enable-libtool-lock was given. -if test ${enable_libtool_lock+y} -then : - enableval=$enable_libtool_lock; -fi - -test no = "$enable_libtool_lock" || enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out what ABI is being produced by ac_compile, and set mode - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `$FILECMD conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE=32 - ;; - *ELF-64*) - HPUX_IA64_MODE=64 - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test yes = "$lt_cv_prog_gnu_ld"; then - case `$FILECMD conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `$FILECMD conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -mips64*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - emul=elf - case `$FILECMD conftest.$ac_objext` in - *32-bit*) - emul="${emul}32" - ;; - *64-bit*) - emul="${emul}64" - ;; - esac - case `$FILECMD conftest.$ac_objext` in - *MSB*) - emul="${emul}btsmip" - ;; - *LSB*) - emul="${emul}ltsmip" - ;; - esac - case `$FILECMD conftest.$ac_objext` in - *N32*) - emul="${emul}n32" - ;; - esac - LD="${LD-ld} -m $emul" - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*|x86_64-gnu*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. Note that the listed cases only cover the - # situations where additional linker options are needed (such as when - # doing 32-bit compilation for a host where ld defaults to 64-bit, or - # vice versa); the common cases where no linker options are needed do - # not appear in the list. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `$FILECMD conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*|x86_64-gnu*) - case `$FILECMD conftest.o` in - *x86-64*) - LD="${LD-ld} -m elf32_x86_64" - ;; - *) - LD="${LD-ld} -m elf_i386" - ;; - esac - ;; - powerpc64le-*linux*) - LD="${LD-ld} -m elf32lppclinux" - ;; - powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*|x86_64-gnu*) - LD="${LD-ld} -m elf_x86_64" - ;; - powerpcle-*linux*) - LD="${LD-ld} -m elf64lppc" - ;; - powerpc-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS -belf" - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -printf %s "checking whether the C compiler needs -belf... " >&6; } -if test ${lt_cv_cc_needs_belf+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - lt_cv_cc_needs_belf=yes -else case e in #( - e) lt_cv_cc_needs_belf=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -printf '%s\n' "$lt_cv_cc_needs_belf" >&6; } - if test yes != "$lt_cv_cc_needs_belf"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS=$SAVE_CFLAGS - fi - ;; -*-*solaris*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `$FILECMD conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*|x86_64-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD=${LD-ld}_sol2 - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks=$enable_libtool_lock - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_MANIFEST_TOOL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -printf '%s\n' "$MANIFEST_TOOL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_MANIFEST_TOOL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -printf '%s\n' "$ac_ct_MANIFEST_TOOL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -printf %s "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if test ${lt_cv_path_manifest_tool+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_path_manifest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_manifest_tool=yes - fi - rm -f conftest* ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_manifest_tool" >&5 -printf '%s\n' "$lt_cv_path_manifest_tool" >&6; } -if test yes != "$lt_cv_path_manifest_tool"; then - MANIFEST_TOOL=: -fi - - - - - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_DSYMUTIL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -printf '%s\n' "$DSYMUTIL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_DSYMUTIL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -printf '%s\n' "$ac_ct_DSYMUTIL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_NMEDIT+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -printf '%s\n' "$NMEDIT" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_NMEDIT+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -printf '%s\n' "$ac_ct_NMEDIT" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_LIPO+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -printf '%s\n' "$LIPO" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_LIPO+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_LIPO="lipo" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -printf '%s\n' "$ac_ct_LIPO" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_OTOOL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -printf '%s\n' "$OTOOL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_OTOOL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL="otool" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -printf '%s\n' "$ac_ct_OTOOL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_OTOOL64+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -printf '%s\n' "$OTOOL64" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_OTOOL64+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -printf '%s\n' "$ac_ct_OTOOL64" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -printf %s "checking for -single_module linker flag... " >&6; } -if test ${lt_cv_apple_cc_single_mod+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_apple_cc_single_mod=no - if test -z "$LT_MULTI_MODULE"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&5 - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test 0 = "$_lt_result"; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -printf '%s\n' "$lt_cv_apple_cc_single_mod" >&6; } - - # Feature test to disable chained fixups since it is not - # compatible with '-undefined dynamic_lookup' - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for -no_fixup_chains linker flag" >&5 -printf %s "checking for -no_fixup_chains linker flag... " >&6; } -if test ${lt_cv_support_no_fixup_chains+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-no_fixup_chains" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - lt_cv_support_no_fixup_chains=yes -else case e in #( - e) lt_cv_support_no_fixup_chains=no - ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_support_no_fixup_chains" >&5 -printf '%s\n' "$lt_cv_support_no_fixup_chains" >&6; } - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -printf %s "checking for -exported_symbols_list linker flag... " >&6; } -if test ${lt_cv_ld_exported_symbols_list+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - lt_cv_ld_exported_symbols_list=yes -else case e in #( - e) lt_cv_ld_exported_symbols_list=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -printf '%s\n' "$lt_cv_ld_exported_symbols_list" >&6; } - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -printf %s "checking for -force_load linker flag... " >&6; } -if test ${lt_cv_ld_force_load+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR $AR_FLAGS libconftest.a conftest.o" >&5 - $AR $AR_FLAGS libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main(void) { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&5 - elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -printf '%s\n' "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - darwin*) - case $MACOSX_DEPLOYMENT_TARGET,$host in - 10.[012],*|,*powerpc*-darwin[5-8]*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - *) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' - if test yes = "$lt_cv_support_no_fixup_chains"; then - as_fn_append _lt_dar_allow_undefined ' $wl-no_fixup_chains' - fi - ;; - esac - ;; - esac - if test yes = "$lt_cv_apple_cc_single_mod"; then - _lt_dar_single_mod='$single_module' - fi - _lt_dar_needs_single_mod=no - case $host_os in - rhapsody* | darwin1.*) - _lt_dar_needs_single_mod=yes ;; - darwin*) - # When targeting Mac OS X 10.4 (darwin 8) or later, - # -single_module is the default and -multi_module is unsupported. - # The toolchain on macOS 10.14 (darwin 18) and later cannot - # target any OS version that needs -single_module. - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*-darwin[567].*|10.[0-3],*-darwin[5-9].*|10.[0-3],*-darwin1[0-7].*) - _lt_dar_needs_single_mod=yes ;; - esac - ;; - esac - if test yes = "$lt_cv_ld_exported_symbols_list"; then - _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' - fi - if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -# func_munge_path_list VARIABLE PATH -# ----------------------------------- -# VARIABLE is name of variable containing _space_ separated list of -# directories to be munged by the contents of PATH, which is string -# having a format: -# "DIR[:DIR]:" -# string "DIR[ DIR]" will be prepended to VARIABLE -# ":DIR[:DIR]" -# string "DIR[ DIR]" will be appended to VARIABLE -# "DIRP[:DIRP]::[DIRA:]DIRA" -# string "DIRP[ DIRP]" will be prepended to VARIABLE and string -# "DIRA[ DIRA]" will be appended to VARIABLE -# "DIR[:DIR]" -# VARIABLE will be replaced by "DIR[ DIR]" -func_munge_path_list () -{ - case x$2 in - x) - ;; - *:) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" - ;; - x:*) - eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" - ;; - *::*) - eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" - eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" - ;; - *) - eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" - ;; - esac -} - -ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes -then : - printf '%s\n' "#define HAVE_DLFCN_H 1" >>confdefs.h - -fi - - - - - -# Set options -enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-cegcc*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_AS+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_AS="${ac_tool_prefix}as" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -AS=$ac_cv_prog_AS -if test -n "$AS"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 -printf '%s\n' "$AS" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_AS+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_AS"; then - ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AS="as" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_AS=$ac_cv_prog_ac_ct_AS -if test -n "$ac_ct_AS"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 -printf '%s\n' "$ac_ct_AS" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_AS" = x; then - AS="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AS=$ac_ct_AS - fi -else - AS="$ac_cv_prog_AS" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_DLLTOOL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -printf '%s\n' "$DLLTOOL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_DLLTOOL+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -printf '%s\n' "$ac_ct_DLLTOOL" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_OBJDUMP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -printf '%s\n' "$OBJDUMP" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_OBJDUMP+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -printf '%s\n' "$ac_ct_OBJDUMP" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - - ;; -esac - -test -z "$AS" && AS=as - - - - - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - - enable_dlopen=no - - - - # Check whether --enable-shared was given. -if test ${enable_shared+y} -then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else case e in #( - e) enable_shared=yes ;; -esac -fi - - - - - - - - - - # Check whether --enable-static was given. -if test ${enable_static+y} -then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else case e in #( - e) enable_static=yes ;; -esac -fi - - - - - - - - - - # Check whether --enable-pic was given. -if test ${enable_pic+y} -then : - enableval=$enable_pic; lt_p=${PACKAGE-default} - case $enableval in - yes|no) pic_mode=$enableval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else case e in #( - e) # Check whether --with-pic was given. -if test ${with_pic+y} -then : - withval=$with_pic; lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $withval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else case e in #( - e) pic_mode=default ;; -esac -fi - - ;; -esac -fi - - - - - - - - - # Check whether --enable-fast-install was given. -if test ${enable_fast_install+y} -then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else case e in #( - e) enable_fast_install=yes ;; -esac -fi - - - - - - - - - shared_archive_member_spec= -case $host,$enable_shared in -power*-*-aix[5-9]*,yes) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 -printf %s "checking which variant of shared library versioning to provide... " >&6; } - # Check whether --enable-aix-soname was given. -if test ${enable_aix_soname+y} -then : - enableval=$enable_aix_soname; case $enableval in - aix|svr4|both) - ;; - *) - as_fn_error $? "Unknown argument to --enable-aix-soname" "$LINENO" 5 - ;; - esac - lt_cv_with_aix_soname=$enable_aix_soname -else case e in #( - e) # Check whether --with-aix-soname was given. -if test ${with_aix_soname+y} -then : - withval=$with_aix_soname; case $withval in - aix|svr4|both) - ;; - *) - as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 - ;; - esac - lt_cv_with_aix_soname=$with_aix_soname -else case e in #( - e) if test ${lt_cv_with_aix_soname+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_with_aix_soname=aix ;; -esac -fi - ;; -esac -fi - - enable_aix_soname=$lt_cv_with_aix_soname ;; -esac -fi - - with_aix_soname=$enable_aix_soname - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 -printf '%s\n' "$with_aix_soname" >&6; } - if test aix != "$with_aix_soname"; then - # For the AIX way of multilib, we name the shared archive member - # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', - # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. - # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, - # the AIX toolchain works better with OBJECT_MODE set (default 32). - if test 64 = "${OBJECT_MODE-32}"; then - shared_archive_member_spec=shr_64 - else - shared_archive_member_spec=shr - fi - fi - ;; -*) - with_aix_soname=aix - ;; -esac - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS=$ltmain - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -printf %s "checking for objdir... " >&6; } -if test ${lt_cv_objdir+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -printf '%s\n' "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -printf '%s\n' "#define LT_OBJDIR \"$lt_cv_objdir/\"" >>confdefs.h - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a '.a' archive for static linking (except MSVC and -# ICC, which need '.lib'). -libext=a - -with_gnu_ld=$lt_cv_prog_gnu_ld - -old_CC=$CC -old_CFLAGS=$CFLAGS - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -func_cc_basename $compiler -cc_basename=$func_cc_basename_result - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -printf %s "checking for ${ac_tool_prefix}file... " >&6; } -if test ${lt_cv_path_MAGIC_CMD+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/${ac_tool_prefix}file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -printf '%s\n' "$MAGIC_CMD" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -printf %s "checking for file... " >&6; } -if test ${lt_cv_path_MAGIC_CMD+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -printf '%s\n' "$MAGIC_CMD" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC=$CC -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(void){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test yes = "$GCC"; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -printf %s "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if test ${lt_cv_prog_compiler_rtti_exceptions+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -printf '%s\n' "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test yes = "$GCC"; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - lt_prog_compiler_pic='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - if test -n "$lt_prog_compiler_pic"; then - lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - case $cc_basename in - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='$wl-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu* | *freebsd*) - case $cc_basename in - # old Intel for x86_64, which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - *flang* | ftn | f18* | f95*) - # Flang compiler. - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | $SED 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *-mlibc) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - serenity*) - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms that do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -printf %s "checking for $compiler option to produce PIC... " >&6; } -if test ${lt_cv_prog_compiler_pic+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -printf '%s\n' "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -printf %s "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if test ${lt_cv_prog_compiler_pic_works+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -printf '%s\n' "$lt_cv_prog_compiler_pic_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_pic_works"; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -printf %s "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test ${lt_cv_prog_compiler_static_works+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_static_works=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -printf '%s\n' "$lt_cv_prog_compiler_static_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_static_works"; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -printf %s "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test ${lt_cv_prog_compiler_c_o+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -printf '%s\n' "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -printf %s "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test ${lt_cv_prog_compiler_c_o+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -printf '%s\n' "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links=nottested -if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then - # do not overwrite the value of need_locks provided by the user - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -printf %s "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -printf '%s\n' "$hard_links" >&6; } - if test no = "$hard_links"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 -printf '%s\n' "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -printf %s "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ' (' and ')$', so one must not match beginning or - # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', - # as well as any symbol that contains 'd'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | windows* | pw32* | cegcc*) - # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++ or Intel C++ Compiler. - if test yes != "$GCC"; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC) - with_gnu_ld=yes - ;; - esac - - ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test yes = "$with_gnu_ld"; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test yes = "$lt_use_gnu_ld_interface"; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='$wl' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - export_dynamic_flag_spec='$wl--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test ia64 != "$host_cpu"; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | windows* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='$wl--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - file_list_spec='@' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file, use it as - # is; otherwise, prepend EXPORTS... - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - link_all_deplibs=no - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - file_list_spec='@' - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test linux-dietlibc = "$host_os"; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test no = "$tmp_diet" - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - nagfor*) # NAGFOR 5.3 - tmp_sharedflag='-Wl,-shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - ;; - esac - case `$CC -V 2>&1 | $SED 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - tcc*) - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - export_dynamic_flag_spec='-rdynamic' - ;; - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - *-mlibc) - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test no = "$ld_shlibs"; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test ia64 = "$host_cpu"; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag= - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to GNU nm, but means don't demangle to AIX nm. - # Without the "-l" option, or with the "-B" option, AIX nm treats - # weak defined symbols like other global defined symbols, whereas - # GNU nm marks them as "W". - # While the 'weak' keyword is ignored in the Export File, we need - # it in the Import File for the 'aix-soname' feature, so we have - # to replace the "-B" option with "-P" for AIX nm. - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # have runtime linking enabled, and use it for executables. - # For shared libraries, we enable/disable runtime linking - # depending on the kind of the shared library created - - # when "with_aix_soname,aix_use_runtimelinking" is: - # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables - # "aix,yes" lib.so shared, rtl:yes, for executables - # lib.a static archive - # "both,no" lib.so.V(shr.o) shared, rtl:yes - # lib.a(lib.so.V) shared, rtl:no, for executables - # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a(lib.so.V) shared, rtl:no - # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a static archive - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then - aix_use_runtimelinking=yes - break - fi - done - if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then - # With aix-soname=svr4, we create the lib.so.V shared archives only, - # so we don't have lib.a shared libs to link our executables. - # We have to force runtime linking in this case. - aix_use_runtimelinking=yes - LDFLAGS="$LDFLAGS -Wl,-brtl" - fi - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='$wl-f,' - case $with_aix_soname,$aix_use_runtimelinking in - aix,*) ;; # traditional, no import file - svr4,* | *,yes) # use import file - # The Import File defines what to hardcode. - hardcode_direct=no - hardcode_direct_absolute=no - ;; - esac - - if test yes = "$GCC"; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`$CC -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test yes = "$aix_use_runtimelinking"; then - shared_flag="$shared_flag "'$wl-G' - fi - # Need to ensure runtime linking is disabled for the traditional - # shared library, or the linker may eventually find shared libraries - # /with/ Import File - we do not want to mix them. - shared_flag_aix='-shared' - shared_flag_svr4='-shared $wl-G' - else - # not using gcc - if test ia64 = "$host_cpu"; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test yes = "$aix_use_runtimelinking"; then - shared_flag='$wl-G' - else - shared_flag='$wl-bM:SRE' - fi - shared_flag_aix='$wl-bM:SRE' - shared_flag_svr4='$wl-G' - fi - fi - - export_dynamic_flag_spec='$wl-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if test ${lt_cv_aix_libpath_+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - ;; -esac -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag - else - if test ia64 = "$host_cpu"; then - hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if test ${lt_cv_aix_libpath_+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - ;; -esac -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' $wl-bernotok' - allow_undefined_flag=' $wl-berok' - if test yes = "$with_gnu_ld"; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi - archive_cmds_need_lc=yes - archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' - # -brtl affects multiple linker settings, -berok does not and is overridden later - compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' - if test svr4 != "$with_aix_soname"; then - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' - fi - if test aix != "$with_aix_soname"; then - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' - else - # used by -dlpreopen to get the symbols - archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' - fi - archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | windows* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++ or Intel C++ Compiler. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl* | icl*) - # Native MSVC or ICC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -Fe$output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp "$export_symbols" "$output_objdir/$soname.def"; - echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; - else - $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -Fe$tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile=$lt_outputfile.exe - lt_tool_outputfile=$lt_tool_outputfile.exe - ;; - esac~ - if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC and ICC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - if test yes = "$lt_cv_ld_force_load"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - - else - whole_archive_flag_spec='' - fi - link_all_deplibs=yes - allow_undefined_flag=$_lt_dar_allow_undefined - case $cc_basename in - ifort*|nagfor*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test yes = "$_lt_dar_can_shared"; then - output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" - archive_expsym_cmds="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" - module_expsym_cmds="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly* | midnightbsd*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test yes = "$GCC"; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='$wl-E' - ;; - - hpux10*) - if test yes,no = "$GCC,$with_gnu_ld"; then - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test yes,no = "$GCC,$with_gnu_ld"; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -printf %s "checking if $CC understands -b... " >&6; } -if test ${lt_cv_prog_compiler__b+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler__b=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -printf '%s\n' "$lt_cv_prog_compiler__b" >&6; } - -if test yes = "$lt_cv_prog_compiler__b"; then - archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - - ;; - esac - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test yes = "$GCC"; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -printf %s "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if test ${lt_cv_irix_exported_symbol+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - lt_cv_irix_exported_symbol=yes -else case e in #( - e) lt_cv_irix_exported_symbol=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -printf '%s\n' "$lt_cv_irix_exported_symbol" >&6; } - if test yes = "$lt_cv_irix_exported_symbol"; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' - fi - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - linux*) - case $cc_basename in - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - ld_shlibs=yes - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - ;; - esac - ;; - - *-mlibc) - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - else - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - file_list_spec='@' - ;; - - osf3*) - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - serenity*) - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test yes = "$GCC"; then - wlarc='$wl' - archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='$wl' - archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands '-z linker_flag'. GCC discards it without '$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test yes = "$GCC"; then - whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test sequent = "$host_vendor"; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='$wl-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We CANNOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='$wl-z,text' - allow_undefined_flag='$wl-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='$wl-Bexport' - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test sni = "$host_vendor"; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='$wl-Blargedynsym' - ;; - esac - fi - fi - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -printf '%s\n' "$ld_shlibs" >&6; } -test no = "$ld_shlibs" && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test yes,yes = "$GCC,$enable_shared"; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -printf %s "checking whether -lc should be explicitly linked in... " >&6; } -if test ${lt_cv_archive_cmds_need_lc+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -printf '%s\n' "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -printf %s "checking dynamic linker characteristics... " >&6; } - -if test yes = "$GCC"; then - case $host_os in - darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; - *) lt_awk_arg='/^libraries:/' ;; - esac - case $host_os in - mingw* | windows* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; - *) lt_sed_strip_eq='s|=/|/|g' ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary... - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - # ...but if some path component already ends with the multilib dir we assume - # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). - case "$lt_multi_os_dir; $lt_search_path_spec " in - "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) - lt_multi_os_dir= - ;; - esac - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" - elif test -n "$lt_multi_os_dir"; then - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS = " "; FS = "/|\n";} { - lt_foo = ""; - lt_count = 0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo = "/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | windows* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's|/\([A-Za-z]:\)|\1|g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=.so -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - - - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='$libname$release$shared_ext$major' - ;; - -aix[4-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test ia64 = "$host_cpu"; then - # AIX 5 supports IA64 - library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line '#! .'. This would cause the generated library to - # depend on '.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # Using Import Files as archive members, it is possible to support - # filename-based versioning of shared library archives on AIX. While - # this would work for both with and without runtime linking, it will - # prevent static linking of such archives. So we do filename-based - # shared library versioning with .so extension only, which is used - # when both runtime linking and shared linking is enabled. - # Unfortunately, runtime linking may impact performance, so we do - # not want this to be the default eventually. Also, we use the - # versioned .so libs for executables only if there is the -brtl - # linker flag in LDFLAGS as well, or --enable-aix-soname=svr4 only. - # To allow for filename-based versioning support, we need to create - # libNAME.so.V as an archive file, containing: - # *) an Import File, referring to the versioned filename of the - # archive as well as the shared archive member, telling the - # bitwidth (32 or 64) of that shared object, and providing the - # list of exported symbols of that shared object, eventually - # decorated with the 'weak' keyword - # *) the shared object with the F_LOADONLY flag set, to really avoid - # it being seen by the linker. - # At run time we better use the real file rather than another symlink, - # but for link time we create the symlink libNAME.so -> libNAME.so.V - - case $with_aix_soname,$aix_use_runtimelinking in - # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - aix,yes) # traditional libtool - dynamic_linker='AIX unversionable lib.so' - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - aix,no) # traditional AIX only - dynamic_linker='AIX lib.a(lib.so.V)' - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - ;; - svr4,*) # full svr4 only - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,yes) # both, prefer svr4 - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # unpreferred sharedlib libNAME.a needs extra handling - postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' - postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,no) # both, prefer aix - dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling - postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' - postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' - ;; - esac - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='$libname$shared_ext' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | windows* | pw32* | cegcc*) - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - # If user builds GCC with multilib enabled, - # it should just install on $(libdir) - # not on $(libdir)/../bin or 32 bits dlls would override 64 bit ones. - if test xyes = x"$multilib"; then - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - $install_prog $dir/$dlname $destdir/$dlname~ - chmod a+x $destdir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib $destdir/$dlname'\'' || exit \$?; - fi' - else - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - fi - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" - ;; - mingw* | windows* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl* | *,icl*) - # Native MSVC or ICC - libname_spec='$name' - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - library_names_spec='$libname.dll.lib' - - case $build_os in - mingw* | windows*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec=$LIB - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC and ICC wrapper - library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' - soname_spec='$libname$release$major$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly* | midnightbsd*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - need_version=yes - ;; - esac - case $host_cpu in - powerpc64) - # On FreeBSD bi-arch platforms, a different variable is used for 32-bit - # binaries. See . - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int test_pointer_size[sizeof (void *) - 5]; - -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - shlibpath_var=LD_LIBRARY_PATH -else case e in #( - e) shlibpath_var=LD_32_LIBRARY_PATH ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ;; - *) - shlibpath_var=LD_LIBRARY_PATH - ;; - esac - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/boot/system/non-packaged/develop/lib /boot/system/develop/lib' - sys_lib_dlsearch_path_spec='/boot/home/config/non-packaged/lib /boot/home/config/lib /boot/system/non-packaged/lib /boot/system/lib' - hardcode_into_libs=no - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - if test 32 = "$HPUX_IA64_MODE"; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - sys_lib_dlsearch_path_spec=/usr/lib/hpux32 - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - sys_lib_dlsearch_path_spec=/usr/lib/hpux64 - fi - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[3-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test yes = "$lt_cv_prog_gnu_ld"; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" - sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -linux*android*) - version_type=none # Android doesn't support versioned libraries. - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext $libname$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - dynamic_linker='Android linker' - # -rpath works at least for libraries that are not overridden by - # libraries installed in system locations. - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - if test ${lt_cv_shlibpath_overrides_runpath+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null -then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - ;; -esac -fi - - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Ideally, we could use ldconfig to report *all* directories which are - # searched for libraries, however this is still not possible. Aside from not - # being certain /sbin/ldconfig is available, command - # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, - # even though it is searched at run-time. Try to do the best guess by - # appending ld.so.conf contents (and includes) to the search path. - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -*-mlibc) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='mlibc ld.so' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec=/usr/lib - need_lib_prefix=no - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - need_version=no - else - need_version=yes - fi - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -os2*) - libname_spec='$name' - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - # OS/2 can only load a DLL with a base name of 8 characters or less. - soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; - v=$($ECHO $release$versuffix | tr -d .-); - n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); - $ECHO $n$v`$shared_ext' - library_names_spec='${libname}_dll.$libext' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=BEGINLIBPATH - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - -rdos*) - dynamic_linker=no - ;; - -serenity*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - dynamic_linker='SerenityOS LibELF' - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test yes = "$with_gnu_ld"; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec; then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' - soname_spec='$libname$shared_ext.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=sco - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test yes = "$with_gnu_ld"; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -emscripten*) - version_type=none - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - dynamic_linker="Emscripten linker" - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test yes = "$GCC"; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - lt_prog_compiler_pic='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - if test -n "$lt_prog_compiler_pic"; then - lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - case $cc_basename in - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - - mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='$wl-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu* | *freebsd*) - case $cc_basename in - # old Intel for x86_64, which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - *flang* | ftn | f18* | f95*) - # Flang compiler. - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | $SED 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *-mlibc) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - serenity*) - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms that do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -printf %s "checking for $compiler option to produce PIC... " >&6; } -if test ${lt_cv_prog_compiler_pic+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -printf '%s\n' "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -printf %s "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if test ${lt_cv_prog_compiler_pic_works+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -printf '%s\n' "$lt_cv_prog_compiler_pic_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_pic_works"; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -printf %s "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test ${lt_cv_prog_compiler_static_works+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) lt_cv_prog_compiler_static_works=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -printf '%s\n' "$lt_cv_prog_compiler_static_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_static_works"; then - : -else - lt_prog_compiler_static= -fi - - - -='-fPIC' - archive_cmds='$CC -sSIDE_MODULE=2 -shared $libobjs $deplibs $compiler_flags -o $lib' - archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -sSIDE_MODULE=2 -shared $libobjs $deplibs $compiler_flags -o $lib -s EXPORTED_FUNCTIONS=@$output_objdir/$soname.expsym' - archive_cmds_need_lc=no - no_undefined_flag= - ;; - -*) - dynamic_linker=no - ;; -esac -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -printf '%s\n' "$dynamic_linker" >&6; } -test no = "$dynamic_linker" && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test yes = "$GCC"; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then - sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec -fi - -if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then - sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec -fi - -# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... -configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec - -# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code -func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" - -# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool -configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -printf %s "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test yes = "$hardcode_automatic"; then - - # We can hardcode non-existent directories. - if test no != "$hardcode_direct" && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && - test no != "$hardcode_minus_L"; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -printf '%s\n' "$hardcode_action" >&6; } - -if test relink = "$hardcode_action" || - test yes = "$inherit_rpath"; then - # Fast installation is not supported - enable_fast_install=no -elif test yes = "$shlibpath_overrides_runpath" || - test no = "$enable_shared"; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test yes != "$enable_dlopen"; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen=load_add_on - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | windows* | pw32* | cegcc*) - lt_cv_dlopen=LoadLibrary - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -printf %s "checking for dlopen in -ldl... " >&6; } -if test ${ac_cv_lib_dl_dlopen+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (void); -int -main (void) -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ac_cv_lib_dl_dlopen=yes -else case e in #( - e) ac_cv_lib_dl_dlopen=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -printf '%s\n' "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes -then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else case e in #( - e) - lt_cv_dlopen=dyld - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; -esac -fi - - ;; - - tpf*) - # Don't try to run any link tests for TPF. We know it's impossible - # because TPF is a cross-compiler, and we know how we open DSOs. - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - lt_cv_dlopen_self=no - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes -then : - lt_cv_dlopen=shl_load -else case e in #( - e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -printf %s "checking for shl_load in -ldld... " >&6; } -if test ${ac_cv_lib_dld_shl_load+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (void); -int -main (void) -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ac_cv_lib_dld_shl_load=yes -else case e in #( - e) ac_cv_lib_dld_shl_load=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -printf '%s\n' "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes -then : - lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld -else case e in #( - e) ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes -then : - lt_cv_dlopen=dlopen -else case e in #( - e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -printf %s "checking for dlopen in -ldl... " >&6; } -if test ${ac_cv_lib_dl_dlopen+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (void); -int -main (void) -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ac_cv_lib_dl_dlopen=yes -else case e in #( - e) ac_cv_lib_dl_dlopen=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -printf '%s\n' "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes -then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else case e in #( - e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -printf %s "checking for dlopen in -lsvld... " >&6; } -if test ${ac_cv_lib_svld_dlopen+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (void); -int -main (void) -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ac_cv_lib_svld_dlopen=yes -else case e in #( - e) ac_cv_lib_svld_dlopen=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -printf '%s\n' "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes -then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld -else case e in #( - e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -printf %s "checking for dld_link in -ldld... " >&6; } -if test ${ac_cv_lib_dld_dld_link+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (void); -int -main (void) -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - ac_cv_lib_dld_dld_link=yes -else case e in #( - e) ac_cv_lib_dld_dld_link=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -printf '%s\n' "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes -then : - lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld -fi - - ;; -esac -fi - - ;; -esac -fi - - ;; -esac -fi - - ;; -esac -fi - - ;; -esac -fi - - ;; - esac - - if test no = "$lt_cv_dlopen"; then - enable_dlopen=no - else - enable_dlopen=yes - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS=$CPPFLAGS - test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS=$LDFLAGS - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS=$LIBS - LIBS="$lt_cv_dlopen_libs $LIBS" - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -printf %s "checking whether a program can dlopen itself... " >&6; } -if test ${lt_cv_dlopen_self+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord (void) __attribute__((visibility("default"))); -#endif - -int fnord (void) { return 42; } -int main (void) -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -printf '%s\n' "$lt_cv_dlopen_self" >&6; } - - if test yes = "$lt_cv_dlopen_self"; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -printf %s "checking whether a statically linked program can dlopen itself... " >&6; } -if test ${lt_cv_dlopen_self_static+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord (void) __attribute__((visibility("default"))); -#endif - -int fnord (void) { return 42; } -int main (void) -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -printf '%s\n' "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS=$save_CPPFLAGS - LDFLAGS=$save_LDFLAGS - LIBS=$save_LIBS - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -printf %s "checking whether stripping libraries is possible... " >&6; } -if test -z "$STRIP"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -else - if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - old_striplib="$STRIP --strip-debug" - striplib="$STRIP --strip-unneeded" - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } - else - case $host_os in - darwin*) - # FIXME - insert some real tests, host_os isn't really good enough - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } - ;; - freebsd*) - if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then - old_striplib="$STRIP --strip-debug" - striplib="$STRIP --strip-unneeded" - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } - else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - fi - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - ;; - esac - fi -fi - - - - - - - - - - - - - # Report what library types will actually be built - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -printf %s "checking if libtool supports shared libraries... " >&6; } - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -printf '%s\n' "$can_build_shared" >&6; } - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -printf %s "checking whether to build shared libraries... " >&6; } - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -printf '%s\n' "$enable_shared" >&6; } - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -printf %s "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -printf '%s\n' "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC=$lt_save_CC - - - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args. -set dummy ${ac_tool_prefix}windres; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_RC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$RC"; then - ac_cv_prog_RC="$RC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_RC="${ac_tool_prefix}windres" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -RC=$ac_cv_prog_RC -if test -n "$RC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $RC" >&5 -printf '%s\n' "$RC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RC"; then - ac_ct_RC=$RC - # Extract the first word of "windres", so it can be a program name with args. -set dummy windres; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_prog_ac_ct_RC+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if test -n "$ac_ct_RC"; then - ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RC="windres" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi ;; -esac -fi -ac_ct_RC=$ac_cv_prog_ac_ct_RC -if test -n "$ac_ct_RC"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RC" >&5 -printf '%s\n' "$ac_ct_RC" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - if test "x$ac_ct_RC" = x; then - RC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RC=$ac_ct_RC - fi -else - RC="$ac_cv_prog_RC" -fi - - - - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -objext_RC=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code=$lt_simple_compile_test_code - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC= -CC=${RC-"windres"} -CFLAGS= -compiler=$CC -compiler_RC=$CC -func_cc_basename $compiler -cc_basename=$func_cc_basename_result - -lt_cv_prog_compiler_c_o_RC=yes - -if test -n "$compiler"; then - : - - - -fi - -GCC=$lt_save_GCC -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS - - -# This is a bit wrong since it is possible to request that only some libs -# are built as shared. Using that feature isn't so common though, and this -# breaks only on Windows (at least for now) if the user enables only some -# libs as shared. - if test "x$enable_shared" != xno; then - COND_SHARED_TRUE= - COND_SHARED_FALSE='#' -else - COND_SHARED_TRUE='#' - COND_SHARED_FALSE= -fi - - -##################### -# Symbol versioning # -##################### - -# NOTE: This checks if we are building shared or static library -# and if --with-pic or --without-pic was used. Thus this check -# must be after Libtool initialization. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if library symbol versioning should be used" >&5 -printf %s "checking if library symbol versioning should be used... " >&6; } -# Check whether --enable-symbol-versions was given. -if test ${enable_symbol_versions+y} -then : - enableval=$enable_symbol_versions; -else case e in #( - e) enable_symbol_versions=auto ;; -esac -fi - -if test "x$enable_symbol_versions" = xauto; then - case $host_os in - # NOTE: Even if one omits -gnu on GNU/Linux (e.g. - # i486-slackware-linux), configure will (via config.sub) - # append -gnu (e.g. i486-slackware-linux-gnu), and this - # test will work correctly. - gnu* | *-gnu* | freebsd*) - enable_symbol_versions=yes - ;; - *) - enable_symbol_versions=no - ;; - esac -fi - -# There are two variants for symbol versioning. -# See src/liblzma/validate_map.sh for details. -# -# On GNU/Linux, extra symbols are added in the C code. These extra symbols -# must not be put into a static library as they can cause problems (and -# even if they didn't cause problems, they would be useless). On other -# systems symbol versioning may be used too but there is no problem as only -# a linker script is specified in src/liblzma/Makefile.am and that isn't -# used when creating a static library. -# -# Libtool always uses -DPIC when building shared libraries by default and -# doesn't use it for static libs by default. This can be overridden with -# --with-pic and --without-pic though. As long as neither --with-pic nor -# --without-pic is used then we can use #ifdef PIC to detect if the file is -# being built for a shared library. -if test "x$enable_symbol_versions" = xno -then : - - enable_symbol_versions=no - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - -elif test "x$enable_shared" = xno -then : - - enable_symbol_versions=no - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no (not building a shared library)" >&5 -printf '%s\n' "no (not building a shared library)" >&6; } - -else case e in #( - e) - # "yes" means that symbol version are to be used but we need to - # autodetect which variant to use. - if test "x$enable_symbol_versions" = xyes ; then - case "$host_cpu-$host_os" in - microblaze*) - # GCC 12 on MicroBlaze doesn't support - # __symver__ attribute. It's simplest and - # safest to use the generic version on that - # platform since then only the linker script - # is needed. The RHEL/CentOS 7 compatibility - # symbols don't matter on MicroBlaze. - enable_symbol_versions=generic - ;; - *-linux*) - # NVIDIA HPC Compiler doesn't support symbol - # versioning but the linker script can still - # be used. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __NVCOMPILER - use_generic_symbol_versioning - #endif -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP_TRADITIONAL "use_generic_symbol_versioning" >/dev/null 2>&1 -then : - enable_symbol_versions=generic -else case e in #( - e) enable_symbol_versions=linux ;; -esac -fi -rm -rf conftest* - - ;; - *) - enable_symbol_versions=generic - ;; - esac - fi - - if test "x$enable_symbol_versions" = xlinux ; then - case "$pic_mode-$enable_static" in - default-*) - # Use symvers if PIC is defined. - have_symbol_versions_linux=2 - ;; - *-no) - # Not building static library. - # Use symvers unconditionally. - have_symbol_versions_linux=1 - ;; - *) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? " - On GNU/Linux, building both shared and static library at the same time - is not supported if --with-pic or --without-pic is used. - Use either --disable-shared or --disable-static to build one type - of library at a time. If both types are needed, build one at a time, - possibly picking only src/liblzma/.libs/liblzma.a from the static build." "$LINENO" 5 - ;; - esac - -printf '%s\n' "#define HAVE_SYMBOL_VERSIONS_LINUX $have_symbol_versions_linux" >>confdefs.h - - elif test "x$enable_symbol_versions" != xgeneric ; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 -printf '%s\n' "" >&6; } - as_fn_error $? "unknown symbol versioning variant '$enable_symbol_versions'" "$LINENO" 5 - fi - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes ($enable_symbol_versions)" >&5 -printf '%s\n' "yes ($enable_symbol_versions)" >&6; } - ;; -esac -fi - - if test "x$enable_symbol_versions" = xlinux; then - COND_SYMVERS_LINUX_TRUE= - COND_SYMVERS_LINUX_FALSE='#' -else - COND_SYMVERS_LINUX_TRUE='#' - COND_SYMVERS_LINUX_FALSE= -fi - - if test "x$enable_symbol_versions" = xgeneric; then - COND_SYMVERS_GENERIC_TRUE= - COND_SYMVERS_GENERIC_FALSE='#' -else - COND_SYMVERS_GENERIC_TRUE='#' - COND_SYMVERS_GENERIC_FALSE= -fi - - - -############################################################################### -# Checks for libraries. -############################################################################### - -echo -echo "Initializing gettext:" - - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -printf %s "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`printf '%s\n' "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval test \${ac_cv_prog_make_${ac_make}_set+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @printf '%s\n' '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make ;; -esac -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } - SET_MAKE= -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - - - # Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -printf %s "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if test ${ac_cv_path_install+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - # Account for fact that we put trailing slashes in our PATH walk. -case $as_dir in #(( - ./ | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF/1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF/1 since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir/" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - ;; -esac -fi - if test ${ac_cv_path_install+y}; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -printf '%s\n' "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a race-free mkdir -p" >&5 -printf %s "checking for a race-free mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if test ${ac_cv_path_mkdir+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext" || continue - case `"$as_dir$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir ('*'coreutils) '* | \ - *'BusyBox '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - ;; -esac -fi - - test -d ./--version && rmdir ./--version - if test ${ac_cv_path_mkdir+y}; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use plain mkdir -p, - # in the hope it doesn't have the bugs of ancient mkdir. - MKDIR_P='mkdir -p' - fi -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -printf '%s\n' "$MKDIR_P" >&6; } - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 -printf %s "checking whether NLS is requested... " >&6; } - # Check whether --enable-nls was given. -if test ${enable_nls+y} -then : - enableval=$enable_nls; USE_NLS=$enableval -else case e in #( - e) USE_NLS=yes ;; -esac -fi - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -printf '%s\n' "$USE_NLS" >&6; } - - - - - GETTEXT_MACRO_VERSION=0.24 - - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_path_MSGFMT+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) case "$MSGFMT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. - ;; - *) - gt_saved_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$gt_saved_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me:${as_lineno-$LINENO}: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$gt_saved_IFS" - test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" - ;; -esac ;; -esac -fi -MSGFMT="$ac_cv_path_MSGFMT" -if test "$MSGFMT" != ":"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 -printf '%s\n' "$MSGFMT" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_path_GMSGFMT+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) case $GMSGFMT in - [\\/]* | ?:[\\/]*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - case $as_dir in #((( - '') as_dir=./ ;; - */) ;; - *) as_dir=$as_dir/ ;; - esac - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then - ac_cv_path_GMSGFMT="$as_dir$ac_word$ac_exec_ext" - printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" - ;; -esac ;; -esac -fi -GMSGFMT=$ac_cv_path_GMSGFMT -if test -n "$GMSGFMT"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 -printf '%s\n' "$GMSGFMT" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - - case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; - *) GMSGFMT_015=$GMSGFMT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_path_XGETTEXT+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) case "$XGETTEXT" in - [\\/]* | ?:[\\/]*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - gt_saved_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$gt_saved_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me:${as_lineno-$LINENO}: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$gt_saved_IFS" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; -esac ;; -esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test "$XGETTEXT" != ":"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 -printf '%s\n' "$XGETTEXT" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - rm -f messages.po - - case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in - '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; - *) XGETTEXT_015=$XGETTEXT ;; - esac - - - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file - -# Extract the first word of "msgmerge", so it can be a program name with args. -set dummy msgmerge; ac_word=$2 -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -printf %s "checking for $ac_word... " >&6; } -if test ${ac_cv_path_MSGMERGE+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) case "$MSGMERGE" in - [\\/]* | ?:[\\/]*) - ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. - ;; - *) - gt_saved_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$gt_saved_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - echo "$as_me:${as_lineno-$LINENO}: trying $ac_dir/$ac_word..." >&5 - if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then - ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi - done - done - IFS="$gt_saved_IFS" - test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" - ;; -esac ;; -esac -fi -MSGMERGE="$ac_cv_path_MSGMERGE" -if test "$MSGMERGE" != ":"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 -printf '%s\n' "$MSGMERGE" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } -fi - - - if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then - MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt' - else - if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then - MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet' - else - MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet' - fi - fi - - - test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= - - - if test -n "$ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - - DESIRED_LINGUAS="${LINGUAS-\$(ALL_LINGUAS)}" - - - ac_config_commands="$ac_config_commands po-directories" - - - - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_saved_prefix" - - - -# Check whether --with-gnu-ld was given. -if test ${with_gnu_ld+y} -then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else case e in #( - e) with_gnu_ld=no ;; -esac -fi - -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which - # contains only /bin. Note that ksh looks also at the FPATH variable, - # so we have to set that as well for the test. - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ - || PATH_SEPARATOR=';' - } -fi - -if test -n "$LD"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ld" >&5 -printf %s "checking for ld... " >&6; } -elif test "$GCC" = yes; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -printf %s "checking for ld used by $CC... " >&6; } -elif test "$with_gnu_ld" = yes; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -printf %s "checking for GNU ld... " >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -printf %s "checking for non-GNU ld... " >&6; } -fi -if test -n "$LD"; then - # Let the user override the test with a path. - : -else - if test ${acl_cv_path_LD+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) - acl_cv_path_LD= # Final result of this test - ac_prog=ld # Program to search in $PATH - if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - case $host in - *-*-mingw* | windows*) - # gcc leaves a trailing carriage return which upsets mingw - acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - acl_output=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $acl_output in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'` - while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do - acl_output=`echo $acl_output | sed "s%$re_direlt%/%"` - done - # Got the pathname. No search in PATH is needed. - acl_cv_path_LD="$acl_output" - ac_prog= - ;; - "") - # If it fails, then pretend we aren't using GCC. - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac - fi - if test -n "$ac_prog"; then - # Search for $ac_prog in $PATH. - acl_saved_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$acl_saved_IFS" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$acl_cv_path_LD" -v 2>&1 conftest.$ac_ext -/* end confdefs.h. */ -#if defined __powerpc64__ || defined __LP64__ - int ok; - #else - error fail - #endif - -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - # The compiler produces 64-bit code. Add option '-b64' so that the - # linker groks 64-bit object files. - case "$acl_cv_path_LD " in - *" -b64 "*) ;; - *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;; - esac - -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ;; - sparc64-*-netbsd*) - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#if defined __sparcv9 || defined __arch64__ - int ok; - #else - error fail - #endif - -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - -else case e in #( - e) # The compiler produces 32-bit code. Add option '-m elf32_sparc' - # so that the linker groks 32-bit object files. - case "$acl_cv_path_LD " in - *" -m elf32_sparc "*) ;; - *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;; - esac - ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ;; - esac - ;; -esac -fi - - LD="$acl_cv_path_LD" -fi -if test -n "$LD"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -printf '%s\n' "$LD" >&6; } -else - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -printf %s "checking if the linker ($LD) is GNU ld... " >&6; } -if test ${acl_cv_prog_gnu_ld+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -printf '%s\n' "$acl_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$acl_cv_prog_gnu_ld - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 -printf %s "checking for shared library run path origin... " >&6; } -if test ${acl_cv_rpath+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 -printf '%s\n' "$acl_cv_rpath" >&6; } - wl="$acl_cv_wl" - acl_libext="$acl_cv_libext" - acl_shlibext="$acl_cv_shlibext" - acl_libname_spec="$acl_cv_libname_spec" - acl_library_names_spec="$acl_cv_library_names_spec" - acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - acl_hardcode_direct="$acl_cv_hardcode_direct" - acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" - # Check whether --enable-rpath was given. -if test ${enable_rpath+y} -then : - enableval=$enable_rpath; : -else case e in #( - e) enable_rpath=yes ;; -esac -fi - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking 32-bit host C ABI" >&5 -printf %s "checking 32-bit host C ABI... " >&6; } -if test ${gl_cv_host_cpu_c_abi_32bit+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) case "$host_cpu" in - - # CPUs that only support a 32-bit ABI. - arc \ - | bfin \ - | cris* \ - | csky \ - | epiphany \ - | ft32 \ - | h8300 \ - | m68k \ - | microblaze | microblazeel \ - | nds32 | nds32le | nds32be \ - | nios2 | nios2eb | nios2el \ - | or1k* \ - | or32 \ - | sh | sh1234 | sh1234elb \ - | tic6x \ - | xtensa* ) - gl_cv_host_cpu_c_abi_32bit=yes - ;; - - # CPUs that only support a 64-bit ABI. - alpha | alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] \ - | mmix ) - gl_cv_host_cpu_c_abi_32bit=no - ;; - - *) - if test -n "$gl_cv_host_cpu_c_abi"; then - case "$gl_cv_host_cpu_c_abi" in - i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | loongarch32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc) - gl_cv_host_cpu_c_abi_32bit=yes ;; - x86_64 | alpha | arm64 | aarch64c | hppa64 | ia64 | loongarch64 | mips64 | powerpc64 | powerpc64-elfv2 | riscv*-lp64* | s390x | sparc64 ) - gl_cv_host_cpu_c_abi_32bit=no ;; - *) - gl_cv_host_cpu_c_abi_32bit=unknown ;; - esac - else - gl_cv_host_cpu_c_abi_32bit=unknown - fi - if test $gl_cv_host_cpu_c_abi_32bit = unknown; then - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int test_pointer_size[sizeof (void *) - 5]; - -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - gl_cv_host_cpu_c_abi_32bit=no -else case e in #( - e) gl_cv_host_cpu_c_abi_32bit=yes ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - fi - ;; - esac - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gl_cv_host_cpu_c_abi_32bit" >&5 -printf '%s\n' "$gl_cv_host_cpu_c_abi_32bit" >&6; } - - HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit" - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ELF binary format" >&5 -printf %s "checking for ELF binary format... " >&6; } -if test ${gl_cv_elf+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#if defined __ELF__ || (defined __linux__ && (defined __EDG__ || defined __SUNPRO_C)) - Extensible Linking Format - #endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP_TRADITIONAL "Extensible Linking Format" >/dev/null 2>&1 -then : - gl_cv_elf=yes -else case e in #( - e) gl_cv_elf=no ;; -esac -fi -rm -rf conftest* - - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gl_cv_elf" >&5 -printf '%s\n' "$gl_cv_elf" >&6; } - if test $gl_cv_elf = yes; then - # Extract the ELF class of a file (5th byte) in decimal. - # Cf. https://en.wikipedia.org/wiki/Executable_and_Linkable_Format#File_header - if od -A x < /dev/null >/dev/null 2>/dev/null; then - # Use POSIX od. - func_elfclass () - { - od -A n -t d1 -j 4 -N 1 - } - else - # Use BSD hexdump. - func_elfclass () - { - dd bs=1 count=1 skip=4 2>/dev/null | hexdump -e '1/1 "%3d "' - echo - } - fi - # Use 'expr', not 'test', to compare the values of func_elfclass, because on - # Solaris 11 OpenIndiana and Solaris 11 OmniOS, the result is 001 or 002, - # not 1 or 2. - case $HOST_CPU_C_ABI_32BIT in - yes) - # 32-bit ABI. - acl_is_expected_elfclass () - { - expr "`func_elfclass | sed -e 's/[ ]//g'`" = 1 > /dev/null - } - ;; - no) - # 64-bit ABI. - acl_is_expected_elfclass () - { - expr "`func_elfclass | sed -e 's/[ ]//g'`" = 2 > /dev/null - } - ;; - *) - # Unknown. - acl_is_expected_elfclass () - { - : - } - ;; - esac - else - acl_is_expected_elfclass () - { - : - } - fi - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for the common suffixes of directories in the library search path" >&5 -printf %s "checking for the common suffixes of directories in the library search path... " >&6; } -if test ${acl_cv_libdirstems+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) acl_libdirstem=lib - acl_libdirstem2= - acl_libdirstem3= - case "$host_os" in - solaris*) - if test $HOST_CPU_C_ABI_32BIT = no; then - acl_libdirstem2=lib/64 - case "$host_cpu" in - sparc*) acl_libdirstem3=lib/sparcv9 ;; - i*86 | x86_64) acl_libdirstem3=lib/amd64 ;; - esac - fi - ;; - netbsd*) - if test $HOST_CPU_C_ABI_32BIT != no; then - case "$host_cpu" in - sparc*) acl_libdirstem2=lib/sparc ;; - esac - fi - ;; - *) - searchpath=`(LC_ALL=C $CC $CPPFLAGS $CFLAGS -print-search-dirs) 2>/dev/null \ - | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` - if test $HOST_CPU_C_ABI_32BIT != no; then - # 32-bit or unknown ABI. - if test -d /usr/lib32; then - acl_libdirstem2=lib32 - fi - fi - if test $HOST_CPU_C_ABI_32BIT != yes; then - # 64-bit or unknown ABI. - if test -d /usr/lib64; then - acl_libdirstem3=lib64 - fi - fi - if test -n "$searchpath"; then - acl_saved_IFS="${IFS= }"; IFS=":" - for searchdir in $searchpath; do - if test -d "$searchdir"; then - case "$searchdir" in - */lib32/ | */lib32 ) acl_libdirstem2=lib32 ;; - */lib64/ | */lib64 ) acl_libdirstem3=lib64 ;; - */../ | */.. ) - # Better ignore directories of this form. They are misleading. - ;; - *) searchdir=`cd "$searchdir" && pwd` - case "$searchdir" in - */lib32 ) acl_libdirstem2=lib32 ;; - */lib64 ) acl_libdirstem3=lib64 ;; - esac ;; - esac - fi - done - IFS="$acl_saved_IFS" - if test $HOST_CPU_C_ABI_32BIT = yes; then - # 32-bit ABI. - acl_libdirstem3= - fi - if test $HOST_CPU_C_ABI_32BIT = no; then - # 64-bit ABI. - acl_libdirstem2= - fi - fi - ;; - esac - test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" - test -n "$acl_libdirstem3" || acl_libdirstem3="$acl_libdirstem" - acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2,$acl_libdirstem3" - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $acl_cv_libdirstems" >&5 -printf '%s\n' "$acl_cv_libdirstems" >&6; } - acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'` - acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e 's/^[^,]*,//' -e 's/,.*//'` - acl_libdirstem3=`echo "$acl_cv_libdirstems" | sed -e 's/^[^,]*,[^,]*,//' -e 's/,.*//'` - - - - - - - - - - - - use_additional=yes - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" - eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" - - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - -# Check whether --with-libiconv-prefix was given. -if test ${with_libiconv_prefix+y} -then : - withval=$with_libiconv_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" - eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" - - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - additional_libdir2="$withval/$acl_libdirstem2" - additional_libdir3="$withval/$acl_libdirstem3" - fi - fi - -fi - - if test "X$additional_libdir2" = "X$additional_libdir"; then - additional_libdir2= - fi - if test "X$additional_libdir3" = "X$additional_libdir"; then - additional_libdir3= - fi - LIBICONV= - LTLIBICONV= - INCICONV= - LIBICONV_PREFIX= - HAVE_LIBICONV= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='iconv ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - for additional_libdir_variable in additional_libdir additional_libdir2 additional_libdir3; do - if test "X$found_dir" = "X"; then - eval dir=\$$additional_libdir_variable - if test -n "$dir"; then - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - fi - done - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBICONV; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem3"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem3 | */$acl_libdirstem3/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem3/"'*$,,'` - if test "$name" = 'iconv'; then - LIBICONV_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCICONV; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - saved_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$saved_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - dependency_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$dependency_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$dependency_libdir" != "X/usr/$acl_libdirstem2" \ - && test "X$dependency_libdir" != "X/usr/$acl_libdirstem3"; then - haveit= - if test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem2" \ - || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem3"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBICONV; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X-L$dependency_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$dependency_libdir"; then - LIBICONV="${LIBICONV}${LIBICONV:+ }-L$dependency_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBICONV; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X-L$dependency_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$dependency_libdir"; then - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$dependency_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dep=`echo "X$dep" | sed -e 's/^X-l//'` - if test "X$dep" != Xc \ - || case $host_os in - linux* | gnu* | k*bsd*-gnu) false ;; - *) true ;; - esac; then - names_next_round="$names_next_round $dep" - fi - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" - ;; - esac - done - fi - else - LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_saved_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_saved_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_saved_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_saved_libdir" - LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" - done - fi - - - - - - - - gl_sed_double_backslashes='s/\\/\\\\/g' - gl_sed_escape_doublequotes='s/"/\\"/g' - gl_sed_escape_for_make_1="s,\\([ \"&'();<>\\\\\`|]\\),\\\\\\1,g" - gl_sed_escape_for_make_2='s,\$,\\$$,g' - case `echo r | tr -d '\r'` in - '') gl_tr_cr='\015' ;; - *) gl_tr_cr='\r' ;; - esac - - - gl_saved_prefix="${prefix}" - gl_saved_datarootdir="${datarootdir}" - gl_saved_localedir="${localedir}" - if test "X$prefix" = "XNONE"; then - prefix="$ac_default_prefix" - fi - eval datarootdir="$datarootdir" - eval localedir="$localedir" - - - - - - gl_final_localedir="$localedir" - case "$build_os" in - cygwin*) - case "$host_os" in - mingw* | windows*) - gl_final_localedir=`cygpath -w "$gl_final_localedir"` ;; - esac - ;; - esac - localedir_c=`printf '%s\n' "$gl_final_localedir" | sed -e "$gl_sed_double_backslashes" -e "$gl_sed_escape_doublequotes" | tr -d "$gl_tr_cr"` - localedir_c='"'"$localedir_c"'"' - - - localedir_c_make=`printf '%s\n' "$localedir_c" | sed -e "$gl_sed_escape_for_make_1" -e "$gl_sed_escape_for_make_2" | tr -d "$gl_tr_cr"` - if test "$localedir_c_make" = '\"'"${gl_final_localedir}"'\"'; then - localedir_c_make='\"$(localedir)\"' - fi - - - localedir="${gl_saved_localedir}" - datarootdir="${gl_saved_datarootdir}" - prefix="${gl_saved_prefix}" - - - - - - - - - - - - - - - - - - - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 -printf %s "checking for CFPreferencesCopyAppValue... " >&6; } -if test ${gt_cv_func_CFPreferencesCopyAppValue+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) gt_saved_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main (void) -{ -CFPreferencesCopyAppValue(NULL, NULL) - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - gt_cv_func_CFPreferencesCopyAppValue=yes -else case e in #( - e) gt_cv_func_CFPreferencesCopyAppValue=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_saved_LIBS" ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 -printf '%s\n' "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } - if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then - -printf '%s\n' "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h - - fi - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyPreferredLanguages" >&5 -printf %s "checking for CFLocaleCopyPreferredLanguages... " >&6; } -if test ${gt_cv_func_CFLocaleCopyPreferredLanguages+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) gt_saved_LIBS="$LIBS" - LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main (void) -{ -CFLocaleCopyPreferredLanguages(); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - gt_cv_func_CFLocaleCopyPreferredLanguages=yes -else case e in #( - e) gt_cv_func_CFLocaleCopyPreferredLanguages=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gt_saved_LIBS" ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyPreferredLanguages" >&5 -printf '%s\n' "$gt_cv_func_CFLocaleCopyPreferredLanguages" >&6; } - if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then - -printf '%s\n' "#define HAVE_CFLOCALECOPYPREFERREDLANGUAGES 1" >>confdefs.h - - fi - INTL_MACOSX_LIBS= - if test $gt_cv_func_CFPreferencesCopyAppValue = yes \ - || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then - INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation -Wl,-framework -Wl,CoreServices" - fi - - - - - INTL_WINDOWS_LIBS= - case "$host_os" in - mingw* | windows*) INTL_WINDOWS_LIBS='-ladvapi32' ;; - esac - - - - - LIBINTL= - LTLIBINTL= - POSUB= - - case " $gt_needs " in - *" need-formatstring-macros "*) gt_api_version=3 ;; - *" need-ngettext "*) gt_api_version=2 ;; - *) gt_api_version=1 ;; - esac - gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" - gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" - - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - - - if test $gt_api_version -ge 3; then - gt_revision_test_code=' -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -' - else - gt_revision_test_code= - fi - if test $gt_api_version -ge 2; then - gt_expression_test_code=' + * ngettext ("", "", 0)' - else - gt_expression_test_code= - fi - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 -printf %s "checking for GNU gettext in libc... " >&6; } -if eval test \${$gt_func_gnugettext_libc+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#if defined _MSC_VER -#define _nl_msg_cat_cntr 0 -#else -extern int _nl_msg_cat_cntr; -#endif -extern int *_nl_domain_bindings; -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - -int -main (void) -{ - -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - if test "`uname -sr`" = 'SunOS 5.11'; then - case `uname -v` in - 11.4 | 11.4.*) eval "$gt_func_gnugettext_libc=yes" ;; - *) eval "$gt_func_gnugettext_libc=no" ;; - esac - else - eval "$gt_func_gnugettext_libc=yes" - fi - -else case e in #( - e) eval "$gt_func_gnugettext_libc=no" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext ;; -esac -fi -eval ac_res=\$$gt_func_gnugettext_libc - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -printf '%s\n' "$ac_res" >&6; } - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then - - - - - - gl_saved_CPPFLAGS="$CPPFLAGS" - - for element in $INCICONV; do - haveit= - for x in $CPPFLAGS; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 -printf %s "checking for iconv... " >&6; } -if test ${am_cv_func_iconv+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -int -main (void) -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - if test "$am_cv_func_iconv" != yes; then - gl_saved_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -int -main (void) -{ -iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - am_cv_lib_iconv=yes - am_cv_func_iconv=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - LIBS="$gl_saved_LIBS" - fi - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 -printf '%s\n' "$am_cv_func_iconv" >&6; } - if test "$am_cv_func_iconv" = yes; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 -printf %s "checking for working iconv... " >&6; } -if test ${am_cv_func_iconv_works+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) - gl_saved_LIBS="$LIBS" - if test $am_cv_lib_iconv = yes; then - LIBS="$LIBS $LIBICONV" - fi - am_cv_func_iconv_works=no - for ac_iconv_const in '' 'const'; do - if test "$cross_compiling" = yes -then : - case "$host_os" in - aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; - *) am_cv_func_iconv_works="guessing yes" ;; - esac -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -#ifndef ICONV_CONST -# define ICONV_CONST $ac_iconv_const -#endif - -int -main (void) -{ -int result = 0; - /* Test against AIX 5.1...7.2 bug: Failures are not distinguishable from - successful returns. This is even documented in - */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 1; - iconv_close (cd_utf8_to_88591); - } - } - /* Test against macOS 14.4 bug: Failures are not distinguishable from - successful returns. - POSIX:2018 says: "The iconv() function shall ... return the number of - non-identical conversions performed." - But here, the conversion always does transliteration (the suffixes - "//TRANSLIT" and "//IGNORE" have no effect, nor does iconvctl()) and - does not report when it does a non-identical conversion. */ - { - iconv_t cd_utf8_to_88591 = iconv_open ("ISO-8859-1", "UTF-8"); - if (cd_utf8_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\305\202"; /* LATIN SMALL LETTER L WITH STROKE */ - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_utf8_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - /* Here: - With glibc, GNU libiconv (including macOS up to 13): res == (size_t)-1, errno == EILSEQ. - With musl libc, NetBSD 10, Solaris 11: res == 1. - With macOS 14.4: res == 0, output is "l". */ - if (res == 0) - result |= 2; - iconv_close (cd_utf8_to_88591); - } - } - /* Test against Solaris 10 bug: Failures are not distinguishable from - successful returns. */ - { - iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); - if (cd_ascii_to_88591 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\263"; - char buf[10]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_ascii_to_88591, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res == 0) - result |= 4; - iconv_close (cd_ascii_to_88591); - } - } - /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304"; - static char buf[2] = { (char)0xDE, (char)0xAD }; - ICONV_CONST char *inptr = input; - size_t inbytesleft = 1; - char *outptr = buf; - size_t outbytesleft = 1; - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) - result |= 8; - iconv_close (cd_88591_to_utf8); - } - } -#if 0 /* This bug could be worked around by the caller. */ - /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ - { - iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); - if (cd_88591_to_utf8 != (iconv_t)(-1)) - { - static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; - char buf[50]; - ICONV_CONST char *inptr = input; - size_t inbytesleft = strlen (input); - char *outptr = buf; - size_t outbytesleft = sizeof (buf); - size_t res = iconv (cd_88591_to_utf8, - &inptr, &inbytesleft, - &outptr, &outbytesleft); - if ((int)res > 0) - result |= 16; - iconv_close (cd_88591_to_utf8); - } - } -#endif - /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is - provided. */ - { - /* Try standardized names. */ - iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP"); - /* Try possible *BSD names. */ - iconv_t cd2 = iconv_open ("UTF-8", "eucJP"); - /* Try AIX names. */ - iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP"); - /* Try HP-UX names. */ - iconv_t cd4 = iconv_open ("utf8", "eucJP"); - if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1) - && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1)) - result |= 32; - if (cd1 != (iconv_t)(-1)) - iconv_close (cd1); - if (cd2 != (iconv_t)(-1)) - iconv_close (cd2); - if (cd3 != (iconv_t)(-1)) - iconv_close (cd3); - if (cd4 != (iconv_t)(-1)) - iconv_close (cd4); - } - return result; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO" -then : - am_cv_func_iconv_works=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi - - test "$am_cv_func_iconv_works" = no || break - done - LIBS="$gl_saved_LIBS" - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 -printf '%s\n' "$am_cv_func_iconv_works" >&6; } - case "$am_cv_func_iconv_works" in - *no) am_func_iconv=no am_cv_lib_iconv=no ;; - *) am_func_iconv=yes ;; - esac - else - am_func_iconv=no am_cv_lib_iconv=no - fi - if test "$am_func_iconv" = yes; then - -printf '%s\n' "#define HAVE_ICONV 1" >>confdefs.h - - fi - if test "$am_cv_lib_iconv" = yes; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 -printf %s "checking how to link with libiconv... " >&6; } - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 -printf '%s\n' "$LIBICONV" >&6; } - else - CPPFLAGS="$gl_saved_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - - - - - - - - - - - use_additional=yes - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" - eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" - - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - -# Check whether --with-libintl-prefix was given. -if test ${with_libintl_prefix+y} -then : - withval=$with_libintl_prefix; - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" - eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" - - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - else - additional_includedir="$withval/include" - additional_libdir="$withval/$acl_libdirstem" - additional_libdir2="$withval/$acl_libdirstem2" - additional_libdir3="$withval/$acl_libdirstem3" - fi - fi - -fi - - if test "X$additional_libdir2" = "X$additional_libdir"; then - additional_libdir2= - fi - if test "X$additional_libdir3" = "X$additional_libdir"; then - additional_libdir3= - fi - LIBINTL= - LTLIBINTL= - INCINTL= - LIBINTL_PREFIX= - HAVE_LIBINTL= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='intl ' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" - else - : - fi - else - found_dir= - found_la= - found_so= - found_a= - eval libname=\"$acl_libname_spec\" # typically: libname=lib$name - if test -n "$acl_shlibext"; then - shrext=".$acl_shlibext" # typically: shrext=.so - else - shrext= - fi - if test $use_additional = yes; then - for additional_libdir_variable in additional_libdir additional_libdir2 additional_libdir3; do - if test "X$found_dir" = "X"; then - eval dir=\$$additional_libdir_variable - if test -n "$dir"; then - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - fi - fi - done - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIBINTL; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test -n "$acl_shlibext"; then - if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then - found_dir="$dir" - found_so="$dir/$libname$shrext" - else - if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then - ver=`(cd "$dir" && \ - for f in "$libname$shrext".*; do echo "$f"; done \ - | sed -e "s,^$libname$shrext\\\\.,," \ - | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ - | sed 1q ) 2>/dev/null` - if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then - found_dir="$dir" - found_so="$dir/$libname$shrext.$ver" - fi - else - eval library_names=\"$acl_library_names_spec\" - for f in $library_names; do - if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then - found_dir="$dir" - found_so="$dir/$f" - break - fi - done - fi - fi - fi - if test "X$found_dir" = "X"; then - if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then - found_dir="$dir" - found_a="$dir/$libname.$acl_libext" - fi - fi - if test "X$found_dir" != "X"; then - if test -f "$dir/$libname.la"; then - found_la="$dir/$libname.la" - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - if test "$enable_rpath" = no \ - || test "X$found_dir" = "X/usr/$acl_libdirstem" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem2" \ - || test "X$found_dir" = "X/usr/$acl_libdirstem3"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - if test "$acl_hardcode_direct" = yes; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" - fi - if test "$acl_hardcode_minus_L" != no; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" - fi - fi - additional_includedir= - case "$found_dir" in - */$acl_libdirstem | */$acl_libdirstem/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` - if test "$name" = 'intl'; then - LIBINTL_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem2 | */$acl_libdirstem2/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` - if test "$name" = 'intl'; then - LIBINTL_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - */$acl_libdirstem3 | */$acl_libdirstem3/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem3/"'*$,,'` - if test "$name" = 'intl'; then - LIBINTL_PREFIX="$basedir" - fi - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INCINTL; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - if test -n "$found_la"; then - saved_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$saved_libdir" - for dep in $dependency_libs; do - case "$dep" in - -L*) - dependency_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - if test "X$dependency_libdir" != "X/usr/$acl_libdirstem" \ - && test "X$dependency_libdir" != "X/usr/$acl_libdirstem2" \ - && test "X$dependency_libdir" != "X/usr/$acl_libdirstem3"; then - haveit= - if test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem" \ - || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem2" \ - || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem3"; then - if test -n "$GCC"; then - case $host_os in - linux* | gnu* | k*bsd*-gnu) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIBINTL; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X-L$dependency_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$dependency_libdir"; then - LIBINTL="${LIBINTL}${LIBINTL:+ }-L$dependency_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIBINTL; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X-L$dependency_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$dependency_libdir"; then - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$dependency_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dep=`echo "X$dep" | sed -e 's/^X-l//'` - if test "X$dep" != Xc \ - || case $host_os in - linux* | gnu* | k*bsd*-gnu) false ;; - *) true ;; - esac; then - names_next_round="$names_next_round $dep" - fi - ;; - *.la) - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" - ;; - esac - done - fi - else - LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$acl_hardcode_libdir_separator"; then - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" - done - acl_saved_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_saved_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - else - for found_dir in $rpathdirs; do - acl_saved_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$acl_hardcode_libdir_flag_spec\" - libdir="$acl_saved_libdir" - LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - for found_dir in $ltrpathdirs; do - LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" - done - fi - - - - - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 -printf %s "checking for GNU gettext in libintl... " >&6; } -if eval test \${$gt_func_gnugettext_libintl+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) gt_saved_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_saved_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#if defined _MSC_VER -#define _nl_msg_cat_cntr 0 -#else -extern int _nl_msg_cat_cntr; -#endif -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - -int -main (void) -{ - -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - eval "$gt_func_gnugettext_libintl=yes" -else case e in #( - e) eval "$gt_func_gnugettext_libintl=no" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - gt_LIBINTL_EXTRA= - case "$host_os" in - darwin*) gt_LIBINTL_EXTRA="$INTL_MACOSX_LIBS" ;; - aix*) gt_LIBINTL_EXTRA="-lpthread" ;; - mingw* | windows*) gt_LIBINTL_EXTRA="$INTL_WINDOWS_LIBS" ;; - esac - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } \ - && { test -n "$LIBICONV" || test -n "$gt_LIBINTL_EXTRA"; }; then - LIBS="$LIBS $LIBICONV $gt_LIBINTL_EXTRA" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#if defined _MSC_VER -#define _nl_msg_cat_cntr 0 -#else -extern int _nl_msg_cat_cntr; -#endif -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias (const char *); -#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) -#else -#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 -#endif -$gt_revision_test_code - -int -main (void) -{ - -bindtextdomain ("", ""); -return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - LIBINTL="$LIBINTL $LIBICONV $gt_LIBINTL_EXTRA" - LTLIBINTL="$LTLIBINTL $LTLIBICONV $gt_LIBINTL_EXTRA" - eval "$gt_func_gnugettext_libintl=yes" - -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - fi - CPPFLAGS="$gt_saved_CPPFLAGS" - LIBS="$gt_saved_LIBS" ;; -esac -fi -eval ac_res=\$$gt_func_gnugettext_libintl - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -printf '%s\n' "$ac_res" >&6; } - fi - - if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ - || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools \ - && test "$PACKAGE" != libintl; }; then - gt_use_preinstalled_gnugettext=yes - else - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - - - if test -n "$INTL_MACOSX_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$gt_cv_use_gnu_libintl" = "yes"; then - LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" - fi - fi - - if test -n "$INTL_WINDOWS_LIBS"; then - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$gt_cv_use_gnu_libintl" = "yes"; then - LIBINTL="$LIBINTL $INTL_WINDOWS_LIBS" - LTLIBINTL="$LTLIBINTL $INTL_WINDOWS_LIBS" - fi - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$gt_cv_use_gnu_libintl" = "yes"; then - -printf '%s\n' "#define ENABLE_NLS 1" >>confdefs.h - - else - USE_NLS=no - fi - fi - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 -printf %s "checking whether to use NLS... " >&6; } - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 -printf '%s\n' "$USE_NLS" >&6; } - if test "$USE_NLS" = "yes"; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 -printf %s "checking where the gettext function comes from... " >&6; } - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 -printf '%s\n' "$gt_source" >&6; } - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 -printf %s "checking how to link with libintl... " >&6; } - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 -printf '%s\n' "$LIBINTL" >&6; } - - for element in $INCINTL; do - haveit= - for x in $CPPFLAGS; do - - acl_saved_prefix="$prefix" - prefix="$acl_final_prefix" - acl_saved_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - eval x=\"$x\" - exec_prefix="$acl_saved_exec_prefix" - prefix="$acl_saved_prefix" - - if test "X$x" = "X$element"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" - fi - done - - fi - - -printf '%s\n' "#define HAVE_GETTEXT 1" >>confdefs.h - - -printf '%s\n' "#define HAVE_DCGETTEXT 1" >>confdefs.h - - fi - - POSUB=po - fi - - - - - INTLLIBS="$LIBINTL" - - - - - - - - - - -# The command line tools use UTF-8 on native Windows. Non-ASCII characters -# display correctly only when using UCRT and gettext-runtime >= 0.23.1. -case $USE_NLS-$host_os in #( - yes-mingw*) : - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for UCRT and gettext-runtime >= 0.23.1" >&5 -printf %s "checking for UCRT and gettext-runtime >= 0.23.1... " >&6; } - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - #define WIN32_LEAN_AND_MEAN - #include - #include - - #ifndef _UCRT - #error "Not UCRT" - #endif - - #if LIBINTL_VERSION < 0x001701 - #error "gettext-runtime < 0.23.1" - #endif - -_ACEOF -if ac_fn_c_try_cpp "$LINENO" -then : - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } - -else case e in #( - e) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - as_fn_error $? " - Translation support (--enable-nls) on native Windows requires - UCRT and gettext-runtime >= 0.23.1. Use --disable-nls to build - with MSVCRT or old gettext-runtime." "$LINENO" 5 - ;; -esac -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - ;; #( - *) : - ;; -esac - - -############################################################################### -# Checks for header files. -############################################################################### - -echo -echo "System headers and functions:" - -# immintrin.h allows the use of the intrinsic functions if they are available. -# cpuid.h may be used for detecting x86 processor features at runtime. -ac_fn_c_check_header_compile "$LINENO" "immintrin.h" "ac_cv_header_immintrin_h" "$ac_includes_default" -if test "x$ac_cv_header_immintrin_h" = xyes -then : - printf '%s\n' "#define HAVE_IMMINTRIN_H 1" >>confdefs.h - -fi -ac_fn_c_check_header_compile "$LINENO" "cpuid.h" "ac_cv_header_cpuid_h" "$ac_includes_default" -if test "x$ac_cv_header_cpuid_h" = xyes -then : - printf '%s\n' "#define HAVE_CPUID_H 1" >>confdefs.h - -fi - - - -############################################################################### -# Checks for typedefs, structures, and compiler characteristics. -############################################################################### - -ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default" -if test "x$ac_cv_type__Bool" = xyes -then : - -printf '%s\n' "#define HAVE__BOOL 1" >>confdefs.h - - -fi - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99 or later" >&5 -printf %s "checking for stdbool.h that conforms to C99 or later... " >&6; } -if test ${ac_cv_header_stdbool_h+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - - /* "true" and "false" should be usable in #if expressions and - integer constant expressions, and "bool" should be a valid - type name. - - Although C99 requires bool, true, and false to be macros, - C23 and C++11 overrule that, so do not test for that. - Although C99 requires __bool_true_false_are_defined and - _Bool, C23 says they are obsolescent, so do not require - them. */ - - #if !true - #error "'true' is not true" - #endif - #if true != 1 - #error "'true' is not equal to 1" - #endif - char b[true == 1 ? 1 : -1]; - char c[true]; - - #if false - #error "'false' is not false" - #endif - #if false != 0 - #error "'false' is not equal to 0" - #endif - char d[false == 0 ? 1 : -1]; - - enum { e = false, f = true, g = false * true, h = true * 256 }; - - char i[(bool) 0.5 == true ? 1 : -1]; - char j[(bool) 0.0 == false ? 1 : -1]; - char k[sizeof (bool) > 0 ? 1 : -1]; - - struct sb { bool s: 1; bool t; } s; - char l[sizeof s.t > 0 ? 1 : -1]; - - /* The following fails for - HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */ - bool m[h]; - char n[sizeof m == h * sizeof m[0] ? 1 : -1]; - char o[-1 - (bool) 0 < 0 ? 1 : -1]; - /* Catch a bug in an HP-UX C compiler. See - https://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html - https://lists.gnu.org/r/bug-coreutils/2005-11/msg00161.html - */ - bool p = true; - bool *pp = &p; - -int -main (void) -{ - - bool ps = &s; - *pp |= p; - *pp |= ! p; - - /* Refer to every declared value, so they cannot be - discarded as unused. */ - return (!b + !c + !d + !e + !f + !g + !h + !i + !j + !k - + !l + !m + !n + !o + !p + !pp + !ps); - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_header_stdbool_h=yes -else case e in #( - e) ac_cv_header_stdbool_h=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5 -printf '%s\n' "$ac_cv_header_stdbool_h" >&6; } - -if test $ac_cv_header_stdbool_h = yes; then - -printf '%s\n' "#define HAVE_STDBOOL_H 1" >>confdefs.h - -fi - - -ac_fn_c_find_uintX_t "$LINENO" "8" "ac_cv_c_uint8_t" -case $ac_cv_c_uint8_t in #( - no|yes) ;; #( - *) - -printf '%s\n' "#define _UINT8_T 1" >>confdefs.h - - -printf '%s\n' "#define uint8_t $ac_cv_c_uint8_t" >>confdefs.h -;; - esac - -ac_fn_c_find_uintX_t "$LINENO" "16" "ac_cv_c_uint16_t" -case $ac_cv_c_uint16_t in #( - no|yes) ;; #( - *) - - -printf '%s\n' "#define uint16_t $ac_cv_c_uint16_t" >>confdefs.h -;; - esac - -ac_fn_c_find_intX_t "$LINENO" "32" "ac_cv_c_int32_t" -case $ac_cv_c_int32_t in #( - no|yes) ;; #( - *) - -printf '%s\n' "#define int32_t $ac_cv_c_int32_t" >>confdefs.h -;; -esac - -ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t" -case $ac_cv_c_uint32_t in #( - no|yes) ;; #( - *) - -printf '%s\n' "#define _UINT32_T 1" >>confdefs.h - - -printf '%s\n' "#define uint32_t $ac_cv_c_uint32_t" >>confdefs.h -;; - esac - -ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t" -case $ac_cv_c_int64_t in #( - no|yes) ;; #( - *) - -printf '%s\n' "#define int64_t $ac_cv_c_int64_t" >>confdefs.h -;; -esac - -ac_fn_c_find_uintX_t "$LINENO" "64" "ac_cv_c_uint64_t" -case $ac_cv_c_uint64_t in #( - no|yes) ;; #( - *) - -printf '%s\n' "#define _UINT64_T 1" >>confdefs.h - - -printf '%s\n' "#define uint64_t $ac_cv_c_uint64_t" >>confdefs.h -;; - esac - - - ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "$ac_includes_default" -if test "x$ac_cv_type_uintptr_t" = xyes -then : - -printf '%s\n' "#define HAVE_UINTPTR_T 1" >>confdefs.h - -else case e in #( - e) for ac_type in 'unsigned int' 'unsigned long int' \ - 'unsigned long long int'; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main (void) -{ -static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - -printf '%s\n' "#define uintptr_t $ac_type" >>confdefs.h - - ac_type= -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - test -z "$ac_type" && break - done ;; -esac -fi - - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like 'int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking size of size_t" >&5 -printf %s "checking size of size_t... " >&6; } -if test ${ac_cv_sizeof_size_t+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (size_t))" "ac_cv_sizeof_size_t" "$ac_includes_default" -then : - -else case e in #( - e) ac_cv_sizeof_size_t=0 ;; -esac -fi - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_size_t" >&5 -printf '%s\n' "$ac_cv_sizeof_size_t" >&6; } - - - -printf '%s\n' "#define SIZEOF_SIZE_T $ac_cv_sizeof_size_t" >>confdefs.h - - - -# The command line tool can copy high resolution timestamps if such -# information is available in struct stat. Otherwise one second accuracy -# is used. -ac_fn_c_check_member "$LINENO" "struct stat" "st_atim.tv_nsec" "ac_cv_member_struct_stat_st_atim_tv_nsec" "$ac_includes_default" -if test "x$ac_cv_member_struct_stat_st_atim_tv_nsec" = xyes -then : - -printf '%s\n' "#define HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC 1" >>confdefs.h - - -fi -ac_fn_c_check_member "$LINENO" "struct stat" "st_atimespec.tv_nsec" "ac_cv_member_struct_stat_st_atimespec_tv_nsec" "$ac_includes_default" -if test "x$ac_cv_member_struct_stat_st_atimespec_tv_nsec" = xyes -then : - -printf '%s\n' "#define HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC 1" >>confdefs.h - - -fi -ac_fn_c_check_member "$LINENO" "struct stat" "st_atimensec" "ac_cv_member_struct_stat_st_atimensec" "$ac_includes_default" -if test "x$ac_cv_member_struct_stat_st_atimensec" = xyes -then : - -printf '%s\n' "#define HAVE_STRUCT_STAT_ST_ATIMENSEC 1" >>confdefs.h - - -fi -ac_fn_c_check_member "$LINENO" "struct stat" "st_uatime" "ac_cv_member_struct_stat_st_uatime" "$ac_includes_default" -if test "x$ac_cv_member_struct_stat_st_uatime" = xyes -then : - -printf '%s\n' "#define HAVE_STRUCT_STAT_ST_UATIME 1" >>confdefs.h - - -fi -ac_fn_c_check_member "$LINENO" "struct stat" "st_atim.st__tim.tv_nsec" "ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" "$ac_includes_default" -if test "x$ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" = xyes -then : - -printf '%s\n' "#define HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC 1" >>confdefs.h - - -fi - - -# Check whether --enable-largefile was given. -if test ${enable_largefile+y} -then : - enableval=$enable_largefile; -fi -if test "$enable_largefile,$enable_year2038" != no,no -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to support large files" >&5 -printf %s "checking for $CC option to support large files... " >&6; } -if test ${ac_cv_sys_largefile_opts+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_save_CPPFLAGS=$CPPFLAGS - ac_opt_found=no - for ac_opt in "none needed" "-D_FILE_OFFSET_BITS=64" "-D_LARGE_FILES=1"; do - if test x"$ac_opt" != x"none needed" -then : - CPPFLAGS="$ac_save_CPPFLAGS $ac_opt" -fi - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#ifndef FTYPE -# define FTYPE off_t -#endif - /* Check that FTYPE can represent 2**63 - 1 correctly. - We can't simply define LARGE_FTYPE to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_FTYPE (((FTYPE) 1 << 31 << 31) - 1 + ((FTYPE) 1 << 31 << 31)) - int FTYPE_is_large[(LARGE_FTYPE % 2147483629 == 721 - && LARGE_FTYPE % 2147483647 == 1) - ? 1 : -1]; -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - if test x"$ac_opt" = x"none needed" -then : - # GNU/Linux s390x and alpha need _FILE_OFFSET_BITS=64 for wide ino_t. - CPPFLAGS="$CPPFLAGS -DFTYPE=ino_t" - if ac_fn_c_try_compile "$LINENO" -then : - -else case e in #( - e) CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=64" - if ac_fn_c_try_compile "$LINENO" -then : - ac_opt='-D_FILE_OFFSET_BITS=64' -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam -fi - ac_cv_sys_largefile_opts=$ac_opt - ac_opt_found=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - test $ac_opt_found = no || break - done - CPPFLAGS=$ac_save_CPPFLAGS - - test $ac_opt_found = yes || ac_cv_sys_largefile_opts="support not detected" ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_opts" >&5 -printf '%s\n' "$ac_cv_sys_largefile_opts" >&6; } - -ac_have_largefile=yes -case $ac_cv_sys_largefile_opts in #( - "none needed") : - ;; #( - "supported through gnulib") : - ;; #( - "support not detected") : - ac_have_largefile=no ;; #( - "-D_FILE_OFFSET_BITS=64") : - -printf '%s\n' "#define _FILE_OFFSET_BITS 64" >>confdefs.h - ;; #( - "-D_LARGE_FILES=1") : - -printf '%s\n' "#define _LARGE_FILES 1" >>confdefs.h - ;; #( - *) : - as_fn_error $? "internal error: bad value for \$ac_cv_sys_largefile_opts" "$LINENO" 5 ;; -esac - -if test "$enable_year2038" != no -then : - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to support timestamps after 2038" >&5 -printf %s "checking for $CC option to support timestamps after 2038... " >&6; } -if test ${ac_cv_sys_year2038_opts+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_save_CPPFLAGS="$CPPFLAGS" - ac_opt_found=no - for ac_opt in "none needed" "-D_TIME_BITS=64" "-D__MINGW_USE_VC2005_COMPAT" "-U_USE_32_BIT_TIME_T -D__MINGW_USE_VC2005_COMPAT"; do - if test x"$ac_opt" != x"none needed" -then : - CPPFLAGS="$ac_save_CPPFLAGS $ac_opt" -fi - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - #include - /* Check that time_t can represent 2**32 - 1 correctly. */ - #define LARGE_TIME_T \\ - ((time_t) (((time_t) 1 << 30) - 1 + 3 * ((time_t) 1 << 30))) - int verify_time_t_range[(LARGE_TIME_T / 65537 == 65535 - && LARGE_TIME_T % 65537 == 0) - ? 1 : -1]; - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_sys_year2038_opts="$ac_opt" - ac_opt_found=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - test $ac_opt_found = no || break - done - CPPFLAGS="$ac_save_CPPFLAGS" - test $ac_opt_found = yes || ac_cv_sys_year2038_opts="support not detected" ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_year2038_opts" >&5 -printf '%s\n' "$ac_cv_sys_year2038_opts" >&6; } - -ac_have_year2038=yes -case $ac_cv_sys_year2038_opts in #( - "none needed") : - ;; #( - "support not detected") : - ac_have_year2038=no ;; #( - "-D_TIME_BITS=64") : - -printf '%s\n' "#define _TIME_BITS 64" >>confdefs.h - ;; #( - "-D__MINGW_USE_VC2005_COMPAT") : - -printf '%s\n' "#define __MINGW_USE_VC2005_COMPAT 1" >>confdefs.h - ;; #( - "-U_USE_32_BIT_TIME_T"*) : - { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error $? "the 'time_t' type is currently forced to be 32-bit. It -will stop working after mid-January 2038. Remove -_USE_32BIT_TIME_T from the compiler flags. -See 'config.log' for more details" "$LINENO" 5; } ;; #( - *) : - as_fn_error $? "internal error: bad value for \$ac_cv_sys_year2038_opts" "$LINENO" 5 ;; -esac - -fi - -fi - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 -printf %s "checking whether byte ordering is bigendian... " >&6; } -if test ${ac_cv_c_bigendian+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_cv_c_bigendian=unknown - # See if we're dealing with a universal compiler. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifndef __APPLE_CC__ - not a universal capable compiler - #endif - typedef int dummy; - -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - - # Check for potential -arch flags. It is not universal unless - # there are at least two -arch flags with different values. - ac_arch= - ac_prev= - for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do - if test -n "$ac_prev"; then - case $ac_word in - i?86 | x86_64 | ppc | ppc64) - if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then - ac_arch=$ac_word - else - ac_cv_c_bigendian=universal - break - fi - ;; - esac - ac_prev= - elif test "x$ac_word" = "x-arch"; then - ac_prev=arch - fi - done -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - if test $ac_cv_c_bigendian = unknown; then - # See if sys/param.h defines the BYTE_ORDER macro. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - #include - -int -main (void) -{ -#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \\ - && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \\ - && LITTLE_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - # It does; now see whether it defined to BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - #include - -int -main (void) -{ -#if BYTE_ORDER != BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_c_bigendian=yes -else case e in #( - e) ac_cv_c_bigendian=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -int -main (void) -{ -#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - # It does; now see whether it defined to _BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -int -main (void) -{ -#ifndef _BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_c_bigendian=yes -else case e in #( - e) ac_cv_c_bigendian=no ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # Compile a test program. - if test "$cross_compiling" = yes -then : - # Try to guess by grepping values from an object file. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -unsigned short int ascii_mm[] = - { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; - unsigned short int ascii_ii[] = - { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; - int use_ascii (int i) { - return ascii_mm[i] + ascii_ii[i]; - } - unsigned short int ebcdic_ii[] = - { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; - unsigned short int ebcdic_mm[] = - { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; - int use_ebcdic (int i) { - return ebcdic_mm[i] + ebcdic_ii[i]; - } - int - main (int argc, char **argv) - { - /* Intimidate the compiler so that it does not - optimize the arrays away. */ - char *p = argv[0]; - ascii_mm[1] = *p++; ebcdic_mm[1] = *p++; - ascii_ii[1] = *p++; ebcdic_ii[1] = *p++; - return use_ascii (argc) == use_ebcdic (*p); - } -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - if grep BIGenDianSyS conftest$ac_exeext >/dev/null; then - ac_cv_c_bigendian=yes - fi - if grep LiTTleEnDian conftest$ac_exeext >/dev/null ; then - if test "$ac_cv_c_bigendian" = unknown; then - ac_cv_c_bigendian=no - else - # finding both strings is unlikely to happen, but who knows? - ac_cv_c_bigendian=unknown - fi - fi -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext -else case e in #( - e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main (void) -{ - - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long int l; - char c[sizeof (long int)]; - } u; - u.l = 1; - return u.c[sizeof (long int) - 1] == 1; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO" -then : - ac_cv_c_bigendian=no -else case e in #( - e) ac_cv_c_bigendian=yes ;; -esac -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi - - fi ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 -printf '%s\n' "$ac_cv_c_bigendian" >&6; } - case $ac_cv_c_bigendian in #( - yes) - printf '%s\n' "#define WORDS_BIGENDIAN 1" >>confdefs.h -;; #( - no) - ;; #( - universal) - -printf '%s\n' "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h - - ;; #( - *) - as_fn_error $? "unknown endianness - presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; - esac - - -# __attribute__((__constructor__)) can be used for one-time initializations. -# Use -Werror because some compilers accept unknown attributes and just -# give a warning. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if __attribute__((__constructor__)) can be used" >&5 -printf %s "checking if __attribute__((__constructor__)) can be used... " >&6; } -have_func_attribute_constructor=no -OLD_CFLAGS="$CFLAGS" -CFLAGS="$CFLAGS -Werror" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - __attribute__((__constructor__)) - static void my_constructor_func(void) { return; } - -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - - -printf '%s\n' "#define HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR 1" >>confdefs.h - - have_func_attribute_constructor=yes - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } - -else case e in #( - e) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext -CFLAGS="$OLD_CFLAGS" - -# The Win95 threading lacks a thread-safe one-time initialization function. -# The one-time initialization is needed for crc32_small.c and crc64_small.c -# create the CRC tables. So if small mode is enabled, the threading mode is -# win95, and the compiler does not support attribute constructor, then we -# would end up with a multithreaded build that is thread-unsafe. As a -# result this configuration is not allowed. -if test "x$enable_small$enable_threads$have_func_attribute_constructor" \ - = xyeswin95no; then - as_fn_error $? " - --enable-threads=win95 and --enable-small cannot be used - at the same time with a compiler that doesn't support - __attribute__((__constructor__))" "$LINENO" 5 -fi - - -############################################################################### -# Checks for library functions. -############################################################################### - -# Gnulib replacements as needed -gl_GETOPT - -# If clock_gettime() is available, liblzma with pthreads may use it, and -# xz may use it even when threading support is disabled. In XZ Utils 5.4.x -# and older, configure checked for clock_gettime() only when using pthreads. -# This way non-threaded builds of liblzma didn't get a useless dependency on -# librt which further had a dependency on libpthread. Avoiding these was -# useful when a small build was needed, for example, for initramfs use. -# -# The above reasoning is thoroughly obsolete: On GNU/Linux, librt hasn't -# been needed for clock_gettime() since glibc 2.17 (2012-12-25). -# Solaris 10 needs librt but Solaris 11 doesn't anymore. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for library containing clock_gettime" >&5 -printf %s "checking for library containing clock_gettime... " >&6; } -if test ${ac_cv_search_clock_gettime+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char clock_gettime (void); -int -main (void) -{ -return clock_gettime (); - ; - return 0; -} -_ACEOF -for ac_lib in '' rt -do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO" -then : - ac_cv_search_clock_gettime=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext - if test ${ac_cv_search_clock_gettime+y} -then : - break -fi -done -if test ${ac_cv_search_clock_gettime+y} -then : - -else case e in #( - e) ac_cv_search_clock_gettime=no ;; -esac -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5 -printf '%s\n' "$ac_cv_search_clock_gettime" >&6; } -ac_res=$ac_cv_search_clock_gettime -if test "$ac_res" != no -then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -ac_fn_c_check_func "$LINENO" "clock_gettime" "ac_cv_func_clock_gettime" -if test "x$ac_cv_func_clock_gettime" = xyes -then : - printf '%s\n' "#define HAVE_CLOCK_GETTIME 1" >>confdefs.h - -fi - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC options to detect undeclared functions" >&5 -printf %s "checking for $CC options to detect undeclared functions... " >&6; } -if test ${ac_cv_c_undeclared_builtin_options+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_save_CFLAGS=$CFLAGS - ac_cv_c_undeclared_builtin_options='cannot detect' - for ac_arg in '' -fno-builtin; do - CFLAGS="$ac_save_CFLAGS $ac_arg" - # This test program should *not* compile successfully. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main (void) -{ -(void) strchr; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - -else case e in #( - e) # This test program should compile successfully. - # No library function is consistently available on - # freestanding implementations, so test against a dummy - # declaration. Include always-available headers on the - # off chance that they somehow elicit warnings. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -extern void ac_decl (int, char *); - -int -main (void) -{ -(void) ac_decl (0, (char *) 0); - (void) ac_decl; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - if test x"$ac_arg" = x -then : - ac_cv_c_undeclared_builtin_options='none needed' -else case e in #( - e) ac_cv_c_undeclared_builtin_options=$ac_arg ;; -esac -fi - break -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - done - CFLAGS=$ac_save_CFLAGS - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_undeclared_builtin_options" >&5 -printf '%s\n' "$ac_cv_c_undeclared_builtin_options" >&6; } - case $ac_cv_c_undeclared_builtin_options in #( - 'cannot detect') : - { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 -printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} -as_fn_error $? "cannot make $CC report undeclared builtins -See 'config.log' for more details" "$LINENO" 5; } ;; #( - 'none needed') : - ac_c_undeclared_builtin_options='' ;; #( - *) : - ac_c_undeclared_builtin_options=$ac_cv_c_undeclared_builtin_options ;; -esac - -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC options to ignore future-version functions" >&5 -printf %s "checking for $CC options to ignore future-version functions... " >&6; } -if test ${ac_cv_c_future_darwin_options+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_compile_saved="$ac_compile" - ac_compile="$ac_compile -Werror=unguarded-availability-new" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#if ! (defined __APPLE__ && defined __MACH__) - #error "-Werror=unguarded-availability-new not needed here" - #endif - -int -main (void) -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO" -then : - ac_cv_c_future_darwin_options='-Werror=unguarded-availability-new' -else case e in #( - e) ac_cv_c_future_darwin_options='none needed' ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext - ac_compile="$ac_compile_saved" - ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_future_darwin_options" >&5 -printf '%s\n' "$ac_cv_c_future_darwin_options" >&6; } - case $ac_cv_c_future_darwin_options in #( - 'none needed') : - ac_c_future_darwin_options='' ;; #( - *) : - ac_c_future_darwin_options=$ac_cv_c_future_darwin_options ;; -esac - -ac_fn_check_decl "$LINENO" "CLOCK_MONOTONIC" "ac_cv_have_decl_CLOCK_MONOTONIC" "#include -" "$ac_c_undeclared_builtin_options$ac_c_future_darwin_options" "CFLAGS" -if test "x$ac_cv_have_decl_CLOCK_MONOTONIC" = xyes -then : - -printf '%s\n' "#define HAVE_CLOCK_MONOTONIC 1" >>confdefs.h - -fi - -# Find the best function to set timestamps. - - for ac_func in futimens futimes futimesat utimes _futime utime -do : - as_ac_var=`printf '%s\n' "ac_cv_func_$ac_func" | sed "$as_sed_sh"` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes" -then : - cat >>confdefs.h <<_ACEOF -#define `printf '%s\n' "HAVE_$ac_func" | sed "$as_sed_cpp"` 1 -_ACEOF - break -fi - -done - -# This is nice to have but not mandatory. -ac_fn_c_check_func "$LINENO" "posix_fadvise" "ac_cv_func_posix_fadvise" -if test "x$ac_cv_func_posix_fadvise" = xyes -then : - printf '%s\n' "#define HAVE_POSIX_FADVISE 1" >>confdefs.h - -fi - - -TUKLIB_PROGNAME -TUKLIB_INTEGER -TUKLIB_PHYSMEM -TUKLIB_CPUCORES -TUKLIB_MBSTR - -# If requested, check for system-provided SHA-256. At least the following -# implementations are supported: -# -# OS Headers Library Type Function -# FreeBSD sys/types.h + sha256.h libmd SHA256_CTX SHA256_Init -# NetBSD sys/types.h + sha2.h SHA256_CTX SHA256_Init -# OpenBSD sys/types.h + sha2.h SHA2_CTX SHA256Init -# Solaris sys/types.h + sha2.h libmd SHA256_CTX SHA256Init -# MINIX 3 sys/types.h + sha2.h SHA256_CTX SHA256_Init -# Darwin CommonCrypto/CommonDigest.h CC_SHA256_CTX CC_SHA256_Init -# -# Note that Darwin's CC_SHA256_Update takes buffer size as uint32_t instead -# of size_t. -# -sha256_header_found=no -sha256_type_found=no -sha256_func_found=no -if test "x$enable_external_sha256" = "xyes" -then : - - # Test for Common Crypto before others, because Darwin has sha256.h - # too and we don't want to use that, because on older versions it - # uses OpenSSL functions, whose SHA256_Init is not guaranteed to - # succeed. - for ac_header in CommonCrypto/CommonDigest.h sha256.h sha2.h -do : - as_ac_Header=`printf '%s\n' "ac_cv_header_$ac_header" | sed "$as_sed_sh"` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes" -then : - cat >>confdefs.h <<_ACEOF -#define `printf '%s\n' "HAVE_$ac_header" | sed "$as_sed_cpp"` 1 -_ACEOF - sha256_header_found=yes ; break -fi - -done - if test "x$sha256_header_found" = xyes; then - ac_fn_c_check_type "$LINENO" "CC_SHA256_CTX" "ac_cv_type_CC_SHA256_CTX" "#ifdef HAVE_SYS_TYPES_H - # include - #endif - #ifdef HAVE_COMMONCRYPTO_COMMONDIGEST_H - # include - #endif - #ifdef HAVE_SHA256_H - # include - #endif - #ifdef HAVE_SHA2_H - # include - #endif -" -if test "x$ac_cv_type_CC_SHA256_CTX" = xyes -then : - -printf '%s\n' "#define HAVE_CC_SHA256_CTX 1" >>confdefs.h - -sha256_type_found=yes -fi -ac_fn_c_check_type "$LINENO" "SHA256_CTX" "ac_cv_type_SHA256_CTX" "#ifdef HAVE_SYS_TYPES_H - # include - #endif - #ifdef HAVE_COMMONCRYPTO_COMMONDIGEST_H - # include - #endif - #ifdef HAVE_SHA256_H - # include - #endif - #ifdef HAVE_SHA2_H - # include - #endif -" -if test "x$ac_cv_type_SHA256_CTX" = xyes -then : - -printf '%s\n' "#define HAVE_SHA256_CTX 1" >>confdefs.h - -sha256_type_found=yes -fi -ac_fn_c_check_type "$LINENO" "SHA2_CTX" "ac_cv_type_SHA2_CTX" "#ifdef HAVE_SYS_TYPES_H - # include - #endif - #ifdef HAVE_COMMONCRYPTO_COMMONDIGEST_H - # include - #endif - #ifdef HAVE_SHA256_H - # include - #endif - #ifdef HAVE_SHA2_H - # include - #endif -" -if test "x$ac_cv_type_SHA2_CTX" = xyes -then : - -printf '%s\n' "#define HAVE_SHA2_CTX 1" >>confdefs.h - -sha256_type_found=yes -fi - - if test "x$sha256_type_found" = xyes ; then - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for library containing SHA256Init" >&5 -printf %s "checking for library containing SHA256Init... " >&6; } -if test ${ac_cv_search_SHA256Init+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char SHA256Init (void); -int -main (void) -{ -return SHA256Init (); - ; - return 0; -} -_ACEOF -for ac_lib in '' md -do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO" -then : - ac_cv_search_SHA256Init=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext - if test ${ac_cv_search_SHA256Init+y} -then : - break -fi -done -if test ${ac_cv_search_SHA256Init+y} -then : - -else case e in #( - e) ac_cv_search_SHA256Init=no ;; -esac -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_SHA256Init" >&5 -printf '%s\n' "$ac_cv_search_SHA256Init" >&6; } -ac_res=$ac_cv_search_SHA256Init -if test "$ac_res" != no -then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for library containing SHA256_Init" >&5 -printf %s "checking for library containing SHA256_Init... " >&6; } -if test ${ac_cv_search_SHA256_Init+y} -then : - printf %s "(cached) " >&6 -else case e in #( - e) ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. - The 'extern "C"' is for builds by C++ compilers; - although this is not generally supported in C code supporting it here - has little cost and some practical benefit (sr 110532). */ -#ifdef __cplusplus -extern "C" -#endif -char SHA256_Init (void); -int -main (void) -{ -return SHA256_Init (); - ; - return 0; -} -_ACEOF -for ac_lib in '' md -do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO" -then : - ac_cv_search_SHA256_Init=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext - if test ${ac_cv_search_SHA256_Init+y} -then : - break -fi -done -if test ${ac_cv_search_SHA256_Init+y} -then : - -else case e in #( - e) ac_cv_search_SHA256_Init=no ;; -esac -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS ;; -esac -fi -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_SHA256_Init" >&5 -printf '%s\n' "$ac_cv_search_SHA256_Init" >&6; } -ac_res=$ac_cv_search_SHA256_Init -if test "$ac_res" != no -then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - - - for ac_func in CC_SHA256_Init SHA256Init SHA256_Init -do : - as_ac_var=`printf '%s\n' "ac_cv_func_$ac_func" | sed "$as_sed_sh"` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes" -then : - cat >>confdefs.h <<_ACEOF -#define `printf '%s\n' "HAVE_$ac_func" | sed "$as_sed_cpp"` 1 -_ACEOF - sha256_func_found=yes ; break -fi - -done - fi - fi - -fi - if test "x$sha256_func_found" = xno; then - COND_INTERNAL_SHA256_TRUE= - COND_INTERNAL_SHA256_FALSE='#' -else - COND_INTERNAL_SHA256_TRUE='#' - COND_INTERNAL_SHA256_FALSE= -fi - -if test "x$enable_external_sha256$sha256_func_found" = xyesno; then - as_fn_error $? "--enable-external-sha256 was specified but no supported external SHA-256 implementation was found" "$LINENO" 5 -fi - -# Check for SSE2 intrinsics. There is no run-time detection for SSE2 so if -# compiler options enable SSE2 then SSE2 support is required by the binaries. -# The compile-time check for SSE2 is done with #ifdefs because some compilers -# (ICC, MSVC) allow SSE2 intrinsics even when SSE2 isn't enabled. -ac_fn_check_decl "$LINENO" "_mm_movemask_epi8" "ac_cv_have_decl__mm_movemask_epi8" "#ifdef HAVE_IMMINTRIN_H -#include -#endif -" "$ac_c_undeclared_builtin_options$ac_c_future_darwin_options" "CFLAGS" -if test "x$ac_cv_have_decl__mm_movemask_epi8" = xyes -then : - -printf '%s\n' "#define HAVE__MM_MOVEMASK_EPI8 1" >>confdefs.h - -fi - -# For faster CRC on 32/64-bit x86 and E2K (see also crc64_fast.c): -# -# - Check for the CLMUL intrinsic _mm_clmulepi64_si128 in . -# Check also for _mm_set_epi64x for consistency with CMake build -# where it's needed to disable CLMUL with VS2013. -# -# - Check that __attribute__((__target__("ssse3,sse4.1,pclmul"))) works -# together with _mm_clmulepi64_si128 from . The attribute -# was added in GCC 4.4 but some GCC 4.x versions don't allow intrinsics -# with it. Exception: it must be not be used with EDG-based compilers -# like ICC and the compiler on E2K. -# -# If everything above is supported, runtime detection will be used to keep the -# binaries working on systems that don't support the required extensions. -# -# NOTE: Use a check that links and not merely compiles to ensure that -# missing intrinsics don't get accepted with compilers that allow -# implicit function declarations. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if _mm_clmulepi64_si128 is usable" >&5 -printf %s "checking if _mm_clmulepi64_si128 is usable... " >&6; } -if test "x$enable_clmul_crc" = xno -then : - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, --disable-clmul-crc was used" >&5 -printf '%s\n' "no, --disable-clmul-crc was used" >&6; } - -else case e in #( - e) - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include - -// CLMUL works on older E2K instruction set but it is slow due to emulation. -#if defined(__e2k__) && __iset__ < 6 -# error -#endif - -// Intel's old compiler (ICC) can define __GNUC__ but the attribute must not -// be used with it. The new Clang-based ICX needs the attribute. -// Checking for !defined(__EDG__) catches ICC and other EDG-based compilers. -#if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__) -__attribute__((__target__("ssse3,sse4.1,pclmul"))) -#endif -int main(void) -{ - __m128i a = _mm_set_epi64x(1, 2); - a = _mm_clmulepi64_si128(a, a, 0); - return 0; -} - -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - - -printf '%s\n' "#define HAVE_USABLE_CLMUL 1" >>confdefs.h - - enable_clmul_crc=yes - -else case e in #( - e) - enable_clmul_crc=no - ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_clmul_crc" >&5 -printf '%s\n' "$enable_clmul_crc" >&6; } - ;; -esac -fi - -# ARM64 C Language Extensions define CRC32 functions in arm_acle.h. -# These are supported by at least GCC and Clang which both need -# __attribute__((__target__("+crc"))), unless the needed compiler flags -# are used to support the CRC instruction. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if ARM64 CRC32 instruction is usable" >&5 -printf %s "checking if ARM64 CRC32 instruction is usable... " >&6; } -if test "x$enable_arm64_crc32" = xno -then : - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, --disable-arm64-crc32 was used" >&5 -printf '%s\n' "no, --disable-arm64-crc32 was used" >&6; } - -else case e in #( - e) - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -#if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__) -__attribute__((__target__("+crc"))) -#endif -int main(void) -{ - return __crc32d(1, 2) != 0; -} - -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - - -printf '%s\n' "#define HAVE_ARM64_CRC32 1" >>confdefs.h - - enable_arm64_crc32=yes - -else case e in #( - e) - enable_arm64_crc32=no - ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_arm64_crc32" >&5 -printf '%s\n' "$enable_arm64_crc32" >&6; } - ;; -esac -fi - -# Check for ARM64 CRC32 instruction runtime detection. -# -# - getauxval() is supported on Linux. -# -# - elf_aux_info() is supported on FreeBSD and OpenBSD >= 7.6. -# -# - sysctlbyname("hw.optional.armv8_crc32", ...) is supported on Darwin -# (macOS, iOS, etc.). Note that sysctlbyname() is supported on FreeBSD, -# NetBSD, and possibly others too but the string is specific to Apple -# OSes. The C code is responsible for checking defined(__APPLE__) -# before using sysctlbyname("hw.optional.armv8_crc32", ...). -# -if test "x$enable_arm64_crc32" = xyes -then : - - - for ac_func in getauxval elf_aux_info sysctlbyname -do : - as_ac_var=`printf '%s\n' "ac_cv_func_$ac_func" | sed "$as_sed_sh"` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes" -then : - cat >>confdefs.h <<_ACEOF -#define `printf '%s\n' "HAVE_$ac_func" | sed "$as_sed_cpp"` 1 -_ACEOF - break -fi - -done - -fi - - -# LoongArch CRC32 intrinsics are in larchintrin.h. -# These are supported by at least GCC and Clang. -# -# Only 64-bit LoongArch is currently supported. -# It doesn't need runtime detection. -{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if LoongArch CRC32 instructions are usable" >&5 -printf %s "checking if LoongArch CRC32 instructions are usable... " >&6; } -if test "x$enable_loongarch_crc32" = xno -then : - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, --disable-loongarch-crc32 was used" >&5 -printf '%s\n' "no, --disable-loongarch-crc32 was used" >&6; } - -else case e in #( - e) - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#if !(defined(__loongarch__) && __loongarch_grlen >= 64) -# error -#endif - -#include -int main(void) -{ - return __crc_w_w_w(1, 2); -} - -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - - -printf '%s\n' "#define HAVE_LOONGARCH_CRC32 1" >>confdefs.h - - enable_loongarch_crc32=yes - -else case e in #( - e) - enable_loongarch_crc32=no - ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_loongarch_crc32" >&5 -printf '%s\n' "$enable_loongarch_crc32" >&6; } - ;; -esac -fi - - -# Check for sandbox support. If one is found, set enable_sandbox=found. -# -# About -fsanitize: Of our three sandbox methods, only Landlock is -# incompatible with -fsanitize. FreeBSD 13.2 with Capsicum was tested with -# -fsanitize=address,undefined and had no issues. OpenBSD (as of version -# 7.4) has minimal support for process instrumentation. OpenBSD does not -# distribute the additional libraries needed (libasan, libubsan, etc.) with -# GCC or Clang needed for runtime sanitization support and instead only -# support -fsanitize-minimal-runtime for minimal undefined behavior -# sanitization. This minimal support is compatible with our use of the -# Pledge sandbox. So only Landlock will result in a build that cannot -# compress or decompress a single file to standard out. -case $enable_sandbox in #( - auto | capsicum) : - - - for ac_func in cap_rights_limit -do : - ac_fn_c_check_func "$LINENO" "cap_rights_limit" "ac_cv_func_cap_rights_limit" -if test "x$ac_cv_func_cap_rights_limit" = xyes -then : - printf '%s\n' "#define HAVE_CAP_RIGHTS_LIMIT 1" >>confdefs.h - enable_sandbox=found -fi - -done - - ;; #( - *) : - ;; -esac -case $enable_sandbox in #( - auto | pledge) : - - - for ac_func in pledge -do : - ac_fn_c_check_func "$LINENO" "pledge" "ac_cv_func_pledge" -if test "x$ac_cv_func_pledge" = xyes -then : - printf '%s\n' "#define HAVE_PLEDGE 1" >>confdefs.h - enable_sandbox=found -fi - -done - - ;; #( - *) : - ;; -esac -case $enable_sandbox in #( - auto | landlock) : - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if Linux Landlock is usable" >&5 -printf %s "checking if Linux Landlock is usable... " >&6; } - - # A compile check is done here because some systems have - # linux/landlock.h, but do not have the syscalls defined - # in order to actually use Linux Landlock. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - #include - #include - #include - - int main(void) - { - (void)prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0); - (void)SYS_landlock_create_ruleset; - (void)SYS_landlock_restrict_self; - (void)LANDLOCK_CREATE_RULESET_VERSION; - return 0; - } - -_ACEOF -if ac_fn_c_try_link "$LINENO" -then : - - enable_sandbox=found - - case "$CC $CFLAGS" in #( - *-fsanitize=*) : - as_fn_error $? " - CC or CFLAGS contain '-fsanitize=' which is incompatible with the Landlock - sandboxing. Use --disable-sandbox when using '-fsanitize'." "$LINENO" 5 ;; #( - *) : - ;; -esac - - -printf '%s\n' "#define HAVE_LINUX_LANDLOCK 1" >>confdefs.h - - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -printf '%s\n' "yes" >&6; } - -else case e in #( - e) - { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 -printf '%s\n' "no" >&6; } - ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.beam \ - conftest$ac_exeext conftest.$ac_ext - - ;; #( - *) : - ;; -esac - -# If a specific sandboxing method was explicitly requested and it wasn't -# found, give an error. -case $enable_sandbox in - auto | no | found) - ;; - *) - as_fn_error $? "$enable_sandbox support not found" "$LINENO" 5 - ;; -esac - - -############################################################################### -# If using GCC, set some additional AM_CFLAGS: -############################################################################### - -if test "$GCC" = yes ; then - echo - echo "GCC extensions:" -fi - -# Always do the visibility check but don't set AM_CFLAGS on Windows. -# This way things get set properly even on Windows. -gl_VISIBILITY +xz +AM_CFLAGS +COND_GNULIB_FALSE +COND_GNULIB_TRUE +HAVE_VISIBILITY +CFLAG_VISIBILITY +COND_INTERNAL_SHA256_FALSE +COND_INTERNAL_SHA256_TRUE +GETOPT_H +LIBOBJS +localedir_c_make +localedir_c +POSUB +LTLIBINTL +LIBINTL +INTLLIBS +LTLIBICONV +LIBICONV +INTL_MACOSX_LIBS +DESIRED_LINGUAS +XGETTEXT_EXTRA_OPTIONS +MSGMERGE_FOR_MSGFMT_OPTION +MSGMERGE +XGETTEXT_015 +XGETTEXT +GMSGFMT_015 +GMSGFMT +MSGFMT +GETTEXT_MACRO_VERSION +USE_NLS +MKDIR_P +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +SET_MAKE +COND_SYMVERS_GENERIC_FALSE +COND_SYMVERS_GENERIC_TRUE +COND_SYMVERS_LINUX_FALSE +COND_SYMVERS_LINUX_TRUE +COND_SHARED_FALSE +COND_SHARED_TRUE +RC +LT_SYS_LIBRARY_PATH +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +MANIFEST_TOOL +AWK +RANLIB +STRIP +ac_ct_AR +AR +FILECMD +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +EGREP +GREP +LIBTOOL +OBJDUMP +DLLTOOL +AS +COND_THREADS_FALSE +COND_THREADS_TRUE +PTHREAD_CFLAGS +PTHREAD_LIBS +PTHREAD_CXX +PTHREAD_CC +ax_pthread_config +CPP +SED +am__fastdepCCAS_FALSE +am__fastdepCCAS_TRUE +CCASDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__include +DEPDIR +am__leading_dot +CCASFLAGS +CCAS +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +LN_S +COND_DOXYGEN_FALSE +COND_DOXYGEN_TRUE +COND_DOC_FALSE +COND_DOC_TRUE +COND_LZMALINKS_FALSE +COND_LZMALINKS_TRUE +COND_LZMAINFO_FALSE +COND_LZMAINFO_TRUE +COND_LZMADEC_FALSE +COND_LZMADEC_TRUE +COND_XZDEC_FALSE +COND_XZDEC_TRUE +COND_XZ_FALSE +COND_XZ_TRUE +COND_SMALL_FALSE +COND_SMALL_TRUE +COND_ASM_X86_FALSE +COND_ASM_X86_TRUE +COND_LZIP_DECODER_FALSE +COND_LZIP_DECODER_TRUE +COND_MICROLZMA_FALSE +COND_MICROLZMA_TRUE +COND_CHECK_SHA256_FALSE +COND_CHECK_SHA256_TRUE +COND_CHECK_CRC64_FALSE +COND_CHECK_CRC64_TRUE +COND_CHECK_CRC32_FALSE +COND_CHECK_CRC32_TRUE +COND_DECODER_LZ_FALSE +COND_DECODER_LZ_TRUE +COND_ENCODER_LZ_FALSE +COND_ENCODER_LZ_TRUE +COND_FILTER_LZ_FALSE +COND_FILTER_LZ_TRUE +COND_DECODER_SIMPLE_FALSE +COND_DECODER_SIMPLE_TRUE +COND_ENCODER_SIMPLE_FALSE +COND_ENCODER_SIMPLE_TRUE +COND_FILTER_SIMPLE_FALSE +COND_FILTER_SIMPLE_TRUE +COND_DECODER_RISCV_FALSE +COND_DECODER_RISCV_TRUE +COND_ENCODER_RISCV_FALSE +COND_ENCODER_RISCV_TRUE +COND_FILTER_RISCV_FALSE +COND_FILTER_RISCV_TRUE +COND_DECODER_SPARC_FALSE +COND_DECODER_SPARC_TRUE +COND_ENCODER_SPARC_FALSE +COND_ENCODER_SPARC_TRUE +COND_FILTER_SPARC_FALSE +COND_FILTER_SPARC_TRUE +COND_DECODER_ARM64_FALSE +COND_DECODER_ARM64_TRUE +COND_ENCODER_ARM64_FALSE +COND_ENCODER_ARM64_TRUE +COND_FILTER_ARM64_FALSE +COND_FILTER_ARM64_TRUE +COND_DECODER_ARMTHUMB_FALSE +COND_DECODER_ARMTHUMB_TRUE +COND_ENCODER_ARMTHUMB_FALSE +COND_ENCODER_ARMTHUMB_TRUE +COND_FILTER_ARMTHUMB_FALSE +COND_FILTER_ARMTHUMB_TRUE +COND_DECODER_ARM_FALSE +COND_DECODER_ARM_TRUE +COND_ENCODER_ARM_FALSE +COND_ENCODER_ARM_TRUE +COND_FILTER_ARM_FALSE +COND_FILTER_ARM_TRUE +COND_DECODER_IA64_FALSE +COND_DECODER_IA64_TRUE +COND_ENCODER_IA64_FALSE +COND_ENCODER_IA64_TRUE +COND_FILTER_IA64_FALSE +COND_FILTER_IA64_TRUE +COND_DECODER_POWERPC_FALSE +COND_DECODER_POWERPC_TRUE +COND_ENCODER_POWERPC_FALSE +COND_ENCODER_POWERPC_TRUE +COND_FILTER_POWERPC_FALSE +COND_FILTER_POWERPC_TRUE +COND_DECODER_X86_FALSE +COND_DECODER_X86_TRUE +COND_ENCODER_X86_FALSE +COND_ENCODER_X86_TRUE +COND_FILTER_X86_FALSE +COND_FILTER_X86_TRUE +COND_DECODER_DELTA_FALSE +COND_DECODER_DELTA_TRUE +COND_ENCODER_DELTA_FALSE +COND_ENCODER_DELTA_TRUE +COND_FILTER_DELTA_FALSE +COND_FILTER_DELTA_TRUE +COND_DECODER_LZMA2_FALSE +COND_DECODER_LZMA2_TRUE +COND_ENCODER_LZMA2_FALSE +COND_ENCODER_LZMA2_TRUE +COND_FILTER_LZMA2_FALSE +COND_FILTER_LZMA2_TRUE +COND_DECODER_LZMA1_FALSE +COND_DECODER_LZMA1_TRUE +COND_ENCODER_LZMA1_FALSE +COND_ENCODER_LZMA1_TRUE +COND_FILTER_LZMA1_FALSE +COND_FILTER_LZMA1_TRUE +COND_MAIN_DECODER_FALSE +COND_MAIN_DECODER_TRUE +COND_MAIN_ENCODER_FALSE +COND_MAIN_ENCODER_TRUE +LN_EXEEXT +COND_W32_FALSE +COND_W32_TRUE +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +ECHO_T +ECHO_N +ECHO_C +target_alias +host_alias +build_alias +LIBS +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +runstatedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL +am__quote' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_debug +enable_encoders +enable_decoders +enable_match_finders +enable_checks +enable_external_sha256 +enable_microlzma +enable_lzip_decoder +enable_assembler +enable_clmul_crc +enable_arm64_crc32 +enable_loongarch_crc32 +enable_small +enable_threads +enable_assume_ram +enable_xz +enable_xzdec +enable_lzmadec +enable_lzmainfo +enable_lzma_links +enable_doc +enable_doxygen +enable_sandbox +enable_dependency_tracking +enable_shared +enable_static +enable_pic +with_pic +enable_fast_install +enable_aix_soname +with_aix_soname +with_gnu_ld +with_sysroot +enable_libtool_lock +enable_symbol_versions +enable_nls +enable_rpath +with_libiconv_prefix +with_libintl_prefix +enable_largefile +enable_unaligned_access +enable_unsafe_type_punning +enable_werror +enable_year2038 +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CCAS +CCASFLAGS +CPP +LT_SYS_LIBRARY_PATH' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +runstatedir='${localstatedir}/run' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: '$ac_useropt'" + ac_useropt_orig=$ac_useropt + ac_useropt=`printf '%s\n' "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: '$ac_useropt'" + ac_useropt_orig=$ac_useropt + ac_useropt=`printf '%s\n' "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -runstatedir | --runstatedir | --runstatedi | --runstated \ + | --runstate | --runstat | --runsta | --runst | --runs \ + | --run | --ru | --r) + ac_prev=runstatedir ;; + -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \ + | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \ + | --run=* | --ru=* | --r=*) + runstatedir=$ac_optarg ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: '$ac_useropt'" + ac_useropt_orig=$ac_useropt + ac_useropt=`printf '%s\n' "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: '$ac_useropt'" + ac_useropt_orig=$ac_useropt + ac_useropt=`printf '%s\n' "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: '$ac_option' +Try '$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: '$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + printf '%s\n' "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + printf '%s\n' "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`printf '%s\n' $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) printf '%s\n' "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir runstatedir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: '$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +printf '%s\n' X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but 'cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +'configure' configures XZ Utils 5.8.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print 'checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for '--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or '..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, 'make install' will install all the files in +'$ac_default_prefix/bin', '$ac_default_prefix/lib' etc. You can specify +an installation prefix other than '$ac_default_prefix' using '--prefix', +for instance '--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --runstatedir=DIR modifiable per-process data [LOCALSTATEDIR/run] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/xz] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of XZ Utils 5.8.0:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-debug Enable debugging code. + --enable-encoders=LIST Comma-separated list of encoders to build. + Default=all. Available encoders: lzma1 lzma2 delta + x86 powerpc ia64 arm armthumb arm64 sparc riscv + --enable-decoders=LIST Comma-separated list of decoders to build. + Default=all. Available decoders are the same as + available encoders. + --enable-match-finders=LIST + Comma-separated list of match finders to build. + Default=all. At least one match finder is required + for encoding with the LZMA1 and LZMA2 filters. + Available match finders: hc3 hc4 bt2 bt3 bt4 + --enable-checks=LIST Comma-separated list of integrity checks to build. + Default=all. Available integrity checks: crc32 crc64 + sha256 + --enable-external-sha256 + Use SHA-256 code from the operating system. See + INSTALL for possible subtle problems. + --disable-microlzma Do not build MicroLZMA encoder and decoder. It is + needed by specific applications only, for example, + erofs-utils. + --disable-lzip-decoder Disable decompression support for .lz (lzip) files. + --disable-assembler Do not use assembler optimizations even if such + exist for the architecture. + --disable-clmul-crc Do not use carryless multiplication for CRC + calculation even if support for it is detected. + --disable-arm64-crc32 Do not use ARM64 CRC32 instructions even if support + for it is detected. + --disable-loongarch-crc32 + Do not use LoongArch CRC32 instructions even if + support for them is detected. + --enable-small Make liblzma smaller and a little slower. This is + disabled by default to optimize for speed. + --enable-threads=METHOD Supported METHODS are 'yes', 'no', 'posix', 'win95', + and 'vista'. The default is 'yes'. Using 'no' + together with --enable-small makes liblzma thread + unsafe. + --enable-assume-ram=SIZE + If and only if the real amount of RAM cannot be + determined, assume SIZE MiB. The default is 128 MiB. + This affects the default memory usage limit. + --disable-xz do not build the xz tool + --disable-xzdec do not build xzdec + --disable-lzmadec do not build lzmadec (it exists primarily for LZMA + Utils compatibility) + --disable-lzmainfo do not build lzmainfo (it exists primarily for LZMA + Utils compatibility) + --disable-lzma-links do not create symlinks for LZMA Utils compatibility + --disable-doc do not install documentation files to docdir (man + pages are still installed and, if --enable-doxygen + is used, liblzma API documentation is installed too) + --enable-doxygen generate HTML version of the liblzma API + documentation using Doxygen and install the result + to docdir + --enable-sandbox=METHOD Sandboxing METHOD can be 'auto', 'no', 'capsicum', + 'pledge', or 'landlock'. The default is 'auto' which + enables sandboxing if a supported sandboxing method + is found. + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-pic[=PKGS] try to use only PIC/non-PIC objects [default=use + both] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --enable-aix-soname=aix|svr4|both + shared library versioning (aka "SONAME") variant to + provide on AIX, [default=aix]. + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-symbol-versions + Use symbol versioning for liblzma. Enabled by + default on GNU/Linux, other GNU-based systems, and + FreeBSD. + --disable-nls do not use Native Language Support + --disable-rpath do not hardcode runtime library paths + --disable-largefile omit support for large files + --enable-unaligned-access + Enable if the system supports *fast* unaligned + memory access with 16-bit, 32-bit, and 64-bit + integers. By default, this is enabled on x86, + x86-64, 32/64-bit big endian PowerPC, 64-bit little + endian PowerPC, and some ARM, ARM64, and RISC-V + systems. + --enable-unsafe-type-punning + This introduces strict aliasing violations and may + result in broken code. However, this might improve + performance in some cases, especially with old + compilers (e.g. GCC 3 and early 4.x on x86, GCC < 6 + on ARMv6 and ARMv7). + --enable-werror Enable -Werror to abort compilation on all compiler + warnings. + --enable-year2038 support timestamps after 2038 + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-sysroot[=DIR] Search for dependent libraries within DIR (or the + compiler's sysroot if not specified). + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib + --without-libiconv-prefix don't search for libiconv in includedir and libdir + --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib + --without-libintl-prefix don't search for libintl in includedir and libdir + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CCAS assembler compiler command (defaults to CC) + CCASFLAGS assembler compiler flags (defaults to CFLAGS) + CPP C preprocessor + LT_SYS_LIBRARY_PATH + User-defined run-time library search path. + +Use these variables to override the choices made by 'configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +XZ Utils home page: . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`printf '%s\n' "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`printf '%s\n' "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for configure.gnu first; this name is used for a wrapper for + # Metaconfig's "Configure" on case-insensitive file systems. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + printf '%s\n' "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +XZ Utils configure 5.8.0 +generated by GNU Autoconf 2.73 + +Copyright (C) 2026 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest.beam + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext +then : + ac_retval=0 +else case e in #( + e) printf '%s\n' "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 ;; +esac +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +printf %s "checking for $2... " >&6; } +if eval test \${$3+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + eval "$3=yes" +else case e in #( + e) eval "$3=no" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +eval ac_res=\$$3 + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +printf '%s\n' "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest.beam conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + } +then : + ac_retval=0 +else case e in #( + e) printf '%s\n' "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 ;; +esac +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + } +then : + ac_retval=0 +else case e in #( + e) printf '%s\n' "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 ;; +esac +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +printf %s "checking for $2... " >&6; } +if eval test \${$3+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (void); below. */ + +#include +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (void); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main (void) +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + eval "$3=yes" +else case e in #( + e) eval "$3=no" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +eval ac_res=\$$3 + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +printf '%s\n' "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to run conftest.$ac_ext, and return whether this succeeded. Assumes that +# executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; } +then : + ac_retval=0 +else case e in #( + e) printf '%s\n' "$as_me: program exited with status $ac_status" >&5 + printf '%s\n' "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status ;; +esac +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +printf %s "checking for $2... " >&6; } +if eval test \${$3+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main (void) +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main (void) +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + +else case e in #( + e) eval "$3=yes" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +eval ac_res=\$$3 + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +printf '%s\n' "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_type + +# ac_fn_c_find_uintX_t LINENO BITS VAR +# ------------------------------------ +# Finds an unsigned integer type with width BITS, setting cache variable VAR +# accordingly. +ac_fn_c_find_uintX_t () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5 +printf %s "checking for uint$2_t... " >&6; } +if eval test \${$3+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) eval "$3=no" + # Order is important - never check a type that is potentially smaller + # than half of the expected target width. + for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \ + 'unsigned long long int' 'unsigned short int' 'unsigned char'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main (void) +{ +static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + case $ac_type in #( + uint$2_t) : + eval "$3=yes" ;; #( + *) : + eval "$3=\$ac_type" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + if eval test \"x\$"$3"\" = x"no" +then : + +else case e in #( + e) break ;; +esac +fi + done ;; +esac +fi +eval ac_res=\$$3 + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +printf '%s\n' "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_find_uintX_t + +# ac_fn_c_find_intX_t LINENO BITS VAR +# ----------------------------------- +# Finds a signed integer type with width BITS, setting cache variable VAR +# accordingly. +ac_fn_c_find_intX_t () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5 +printf %s "checking for int$2_t... " >&6; } +if eval test \${$3+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) eval "$3=no" + # Order is important - never check a type that is potentially smaller + # than half of the expected target width. + for ac_type in int$2_t 'int' 'long int' \ + 'long long int' 'short int' 'signed char'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default + enum { N = $2 / 2 - 1 }; +int +main (void) +{ +static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default + enum { N = $2 / 2 - 1 }; +int +main (void) +{ +static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1) + < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + +else case e in #( + e) case $ac_type in #( + int$2_t) : + eval "$3=yes" ;; #( + *) : + eval "$3=\$ac_type" ;; +esac ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + if eval test \"x\$"$3"\" = x"no" +then : + +else case e in #( + e) break ;; +esac +fi + done ;; +esac +fi +eval ac_res=\$$3 + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +printf '%s\n' "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_find_intX_t + +# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES +# -------------------------------------------- +# Tries to find the compile-time value of EXPR in a program that includes +# INCLUDES, setting VAR accordingly. Returns whether the value could be +# computed +ac_fn_c_compute_int () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main (void) +{ +static int test_array [1 - 2 * !(($2) >= 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_lo=0 ac_mid=0 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main (void) +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_hi=$ac_mid; break +else case e in #( + e) as_fn_arith $ac_mid + 1 && ac_lo=$as_val + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + done +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main (void) +{ +static int test_array [1 - 2 * !(($2) < 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_hi=-1 ac_mid=-1 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main (void) +{ +static int test_array [1 - 2 * !(($2) >= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_lo=$ac_mid; break +else case e in #( + e) as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + done +else case e in #( + e) ac_lo= ac_hi= ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main (void) +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_hi=$ac_mid +else case e in #( + e) as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +done +case $ac_lo in #(( +?*) eval "$3=\$ac_lo"; ac_retval=0 ;; +'') ac_retval=1 ;; +esac + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +static long int longval (void) { return $2; } +static unsigned long int ulongval (void) { return $2; } +#include +#include +int +main (void) +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + return 1; + if (($2) < 0) + { + long int i = longval (); + if (i != ($2)) + return 1; + fprintf (f, "%ld", i); + } + else + { + unsigned long int i = ulongval (); + if (i != ($2)) + return 1; + fprintf (f, "%lu", i); + } + /* Do not output a trailing newline, as this causes \r\n confusion + on some platforms. */ + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO" +then : + echo >>conftest.val; read $3 &5 +printf %s "checking for $2.$3... " >&6; } +if eval test \${$4+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$5 +int +main (void) +{ +static $2 ac_aggr; +if (ac_aggr.$3) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + eval "$4=yes" +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$5 +int +main (void) +{ +static $2 ac_aggr; +if (sizeof ac_aggr.$3) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + eval "$4=yes" +else case e in #( + e) eval "$4=no" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +eval ac_res=\$$4 + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +printf '%s\n' "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_member + +# ac_fn_check_decl LINENO SYMBOL VAR INCLUDES EXTRA-OPTIONS FLAG-VAR +# ------------------------------------------------------------------ +# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR +# accordingly. Pass EXTRA-OPTIONS to the compiler, using FLAG-VAR. +ac_fn_check_decl () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + as_decl_name=`echo $2|sed 's/ *(.*//'` + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 +printf %s "checking whether $as_decl_name is declared... " >&6; } +if eval test \${$3+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` + eval ac_save_FLAGS=\$$6 + as_fn_append $6 " $5" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main (void) +{ +#ifndef $as_decl_name +#ifdef __cplusplus + (void) $as_decl_use; +#else + (void) $as_decl_name; +#endif +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + eval "$3=yes" +else case e in #( + e) eval "$3=no" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + eval $6=\$ac_save_FLAGS + ;; +esac +fi +eval ac_res=\$$3 + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +printf '%s\n' "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_check_decl +ac_configure_args_raw= +for ac_arg +do + case $ac_arg in + *\'*) + ac_arg=`printf '%s\n' "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append ac_configure_args_raw " '$ac_arg'" +done + +case $ac_configure_args_raw in + *$as_nl*) + ac_safe_unquote= ;; + *) + ac_unsafe_z='|&;<>()$`\\"*?[ '' ' # This string ends in space, tab. + ac_unsafe_a="$ac_unsafe_z#~" + ac_safe_unquote="s/ '\\([^$ac_unsafe_a][^$ac_unsafe_z]*\\)'/ \\1/g" + ac_configure_args_raw=` printf '%s\n' "$ac_configure_args_raw" | sed "$ac_safe_unquote"`;; +esac + +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by XZ Utils $as_me 5.8.0, which was +generated by GNU Autoconf 2.73. Invocation command line was + + $ $0$ac_configure_args_raw + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + printf '%s\n' "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`printf '%s\n' "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# Dump the cache to stdout. It can be in a pipe (this is a requirement). +ac_cache_dump () +{ + # The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +printf '%s\n' "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # 'set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # 'set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) +} + +# Print debugging info to stdout. +ac_dump_debugging_info () +{ + echo + + printf '%s\n' "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + ac_cache_dump + echo + + printf '%s\n' "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'*) ac_val=`printf '%s\n' "$ac_val" | sed "s/'/'\\\\\\\\''/g"`;; + esac + printf '%s\n' "$ac_var='$ac_val'" + done | sort + echo + + if test -n "$ac_subst_files"; then + printf '%s\n' "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'*) ac_val=`printf '%s\n' "$ac_val" | sed "s/'/'\\\\\\\\''/g"`;; + esac + printf '%s\n' "$ac_var='$ac_val'" + done | sort + echo + fi + + if test -s confdefs.h; then + printf '%s\n' "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + printf '%s\n' "$as_me: caught signal $ac_signal" + printf '%s\n' "$as_me: exit $exit_status" +} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. +ac_exit_trap () +{ + exit_status= + # Sanitize IFS. + IFS=" "" $as_nl" + # Save into config.log some information that might help in debugging. + ac_dump_debugging_info >&5 + eval "rm -f $ac_clean_CONFIG_STATUS core *.core core.conftest.*" && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +} + +trap 'ac_exit_trap $?' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +printf '%s\n' "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +printf '%s\n' "#define PACKAGE_NAME \"$PACKAGE_NAME\"" >>confdefs.h + +printf '%s\n' "#define PACKAGE_TARNAME \"$PACKAGE_TARNAME\"" >>confdefs.h + +printf '%s\n' "#define PACKAGE_VERSION \"$PACKAGE_VERSION\"" >>confdefs.h + +printf '%s\n' "#define PACKAGE_STRING \"$PACKAGE_STRING\"" >>confdefs.h + +printf '%s\n' "#define PACKAGE_BUGREPORT \"$PACKAGE_BUGREPORT\"" >>confdefs.h + +printf '%s\n' "#define PACKAGE_URL \"$PACKAGE_URL\"" >>confdefs.h + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +if test -n "$CONFIG_SITE"; then + ac_site_files="$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + ac_site_files="$prefix/share/config.site $prefix/etc/config.site" +else + ac_site_files="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +fi + +for ac_site_file in $ac_site_files +do + case $ac_site_file in #( + */*) : + ;; #( + *) : + ac_site_file=./$ac_site_file ;; +esac + if test -f "$ac_site_file" && test -r "$ac_site_file"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +printf '%s\n' "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See 'config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +printf '%s\n' "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +printf '%s\n' "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Test code for whether the C compiler supports C23 (global declarations) +ac_c_conftest_c23_globals=' +/* Does the compiler advertise conformance to C17 or earlier? + Although GCC 14 does not do that, even with -std=gnu23, + it is close enough, and defines __STDC_VERSION == 202000L. */ +#if !defined __STDC_VERSION__ || __STDC_VERSION__ <= 201710L +# error "Compiler advertises conformance to C17 or earlier" +#endif + +// Check alignas. +char alignas (double) c23_aligned_as_double; +char alignas (0) c23_no_special_alignment; +extern char c23_aligned_as_int; +char alignas (0) alignas (int) c23_aligned_as_int; + +// Check alignof. +enum +{ + c23_int_alignment = alignof (int), + c23_int_array_alignment = alignof (int[100]), + c23_char_alignment = alignof (char) +}; +static_assert (0 < -alignof (int), "alignof is signed"); + +int function_with_unnamed_parameter (int) { return 0; } + +void c23_noreturn (); + +/* Test parsing of string and char UTF-8 literals (including hex escapes). + The parens pacify GCC 15. */ +bool use_u8 = (!sizeof u8"\xFF") == (!u8'\''x'\''); + +bool check_that_bool_works = true | false | !nullptr; +#if !true +# error "true does not work in #if" +#endif +#if false +#elifdef __STDC_VERSION__ +#else +# error "#elifdef does not work" +#endif + +#ifndef __has_c_attribute +# error "__has_c_attribute not defined" +#endif + +#ifndef __has_include +# error "__has_include not defined" +#endif + +#define LPAREN() ( +#define FORTY_TWO(x) 42 +#define VA_OPT_TEST(r, x, ...) __VA_OPT__ (FORTY_TWO r x)) +static_assert (VA_OPT_TEST (LPAREN (), 0, <:-) == 42); + +static_assert (0b101010 == 42); +static_assert (0B101010 == 42); +static_assert (0xDEAD'\''BEEF == 3'\''735'\''928'\''559); +static_assert (0.500'\''000'\''000 == 0.5); + +enum unsignedish : unsigned int { uione = 1 }; +static_assert (0 < -uione); + +#include +constexpr nullptr_t null_pointer = nullptr; + +static typeof (1 + 1L) two () { return 2; } +static long int three () { return 3; } +' + +# Test code for whether the C compiler supports C23 (body of main). +ac_c_conftest_c23_main=' + { + label_before_declaration: + int arr[10] = {}; + if (arr[0]) + goto label_before_declaration; + if (!arr[0]) + goto label_at_end_of_block; + label_at_end_of_block: + } + ok |= !null_pointer; + ok |= two != three; +' + +# Test code for whether the C compiler supports C23 (complete). +ac_c_conftest_c23_program="${ac_c_conftest_c23_globals} + +int +main (int, char **) +{ + int ok = 0; + ${ac_c_conftest_c23_main} + return ok; +} +" + +# Test code for whether the C compiler supports C89 (global declarations) +ac_c_conftest_c89_globals=' +/* Do not test the value of __STDC__, because some compilers define it to 0 + or do not define it, while otherwise adequately conforming. */ + +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7 src/conf.sh. */ +struct buf { int x; }; +struct buf * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (char **p, int i) +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* C89 style stringification. */ +#define noexpand_stringify(a) #a +const char *stringified = noexpand_stringify(arbitrary+token=sequence); + +/* C89 style token pasting. Exercises some of the corner cases that + e.g. old MSVC gets wrong, but not very hard. */ +#define noexpand_concat(a,b) a##b +#define expand_concat(a,b) noexpand_concat(a,b) +extern int vA; +extern int vbee; +#define aye A +#define bee B +int *pvA = &expand_concat(v,aye); +int *pvbee = &noexpand_concat(v,bee); + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not \xHH hex character constants. + These do not provoke an error unfortunately, instead are silently treated + as an "x". The following induces an error, until -std is added to get + proper ANSI mode. Curiously \x00 != x always comes out true, for an + array size at least. It is necessary to write \x00 == 0 to get something + that is true only with -std. */ +int osf4_cc_array ['\''\x00'\'' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) '\''x'\'' +int xlc6_cc_array[FOO(a) == '\''x'\'' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, int *(*)(struct buf *, struct stat *, int), + int, int);' + +# Test code for whether the C compiler supports C89 (body of main). +ac_c_conftest_c89_main=' +ok |= (argc == 0 || f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]); +' + +# Test code for whether the C compiler supports C99 (global declarations) +ac_c_conftest_c99_globals=' +/* Does the compiler advertise C99 conformance? */ +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 199901L +# error "Compiler does not advertise C99 conformance" +#endif + +// See if C++-style comments work. + +#include +extern int puts (const char *); +extern int printf (const char *, ...); +extern int dprintf (int, const char *, ...); +extern void *malloc (size_t); +extern void free (void *); + +// Check varargs macros. These examples are taken from C99 6.10.3.5. +// dprintf is used instead of fprintf to avoid needing to declare +// FILE and stderr, and "aND" is used instead of "and" to work around +// GCC bug 40564 which is irrelevant here. +#define debug(...) dprintf (2, __VA_ARGS__) +#define showlist(...) puts (#__VA_ARGS__) +#define report(test,...) ((test) ? puts (#test) : printf (__VA_ARGS__)) +static void +test_varargs_macros (void) +{ + int x = 1234; + int y = 5678; + debug ("Flag"); + debug ("X = %d\n", x); + showlist (The first, second, aND third items.); + report (x>y, "x is %d but y is %d", x, y); +} + +// Check long long types. +#define BIG64 18446744073709551615ull +#define BIG32 4294967295ul +#define BIG_OK (BIG64 / BIG32 == 4294967297ull && BIG64 % BIG32 == 0) +#if !BIG_OK + #error "your preprocessor is broken" +#endif +#if BIG_OK +#else + #error "your preprocessor is broken" +#endif +static long long int bignum = -9223372036854775807LL; +static unsigned long long int ubignum = BIG64; + +struct incomplete_array +{ + int datasize; + double data[]; +}; + +struct named_init { + int number; + const wchar_t *name; + double average; +}; + +typedef const char *ccp; + +static inline int +test_restrict (ccp restrict text) +{ + // Iterate through items via the restricted pointer. + // Also check for declarations in for loops. + for (unsigned int i = 0; *(text+i) != '\''\0'\''; ++i) + continue; + return 0; +} + +// Check varargs and va_copy. +static bool +test_varargs (const char *format, ...) +{ + va_list args; + va_start (args, format); + va_list args_copy; + va_copy (args_copy, args); + + const char *str = ""; + int number = 0; + float fnumber = 0; + + while (*format) + { + switch (*format++) + { + case '\''s'\'': // string + str = va_arg (args_copy, const char *); + break; + case '\''d'\'': // int + number = va_arg (args_copy, int); + break; + case '\''f'\'': // float + fnumber = va_arg (args_copy, double); + break; + default: + break; + } + } + va_end (args_copy); + va_end (args); + + return *str && number && fnumber; +} +' + +# Test code for whether the C compiler supports C99 (body of main). +ac_c_conftest_c99_main=' + // Check bool. + _Bool success = false; + success |= (argc != 0); + + // Check restrict. + if (test_restrict ("String literal") == 0) + success = true; + const char *restrict newvar = "Another string"; + + // Check varargs. + success &= test_varargs ("s, d'\'' f .", "string", 65, 34.234); + test_varargs_macros (); + + // Check flexible array members. + static struct incomplete_array *volatile incomplete_array_pointer; + struct incomplete_array *ia = incomplete_array_pointer; + ia->datasize = 10; + for (int i = 0; i < ia->datasize; ++i) + ia->data[i] = i * 1.234; + // Work around memory leak warnings. + free (ia); + + // Check named initializers. + struct named_init ni = { + .number = 34, + .name = L"Test wide string", + .average = 543.34343, + }; + + ni.number = 58; + + // Do not test for VLAs, as some otherwise-conforming compilers lack them. + // C code should instead use __STDC_NO_VLA__; see Autoconf manual. + + // work around unused variable warnings + ok |= (!success || bignum == 0LL || ubignum == 0uLL || newvar[0] == '\''x'\'' + || ni.number != 58); +' + +# Test code for whether the C compiler supports C11 (global declarations) +ac_c_conftest_c11_globals=' +/* Does the compiler advertise C11 conformance? */ +#if !defined __STDC_VERSION__ || __STDC_VERSION__ < 201112L +# error "Compiler does not advertise C11 conformance" +#endif + +// Check _Alignas. +char _Alignas (double) aligned_as_double; +char _Alignas (0) no_special_alignment; +extern char aligned_as_int; +char _Alignas (0) _Alignas (int) aligned_as_int; + +// Check _Alignof. +enum +{ + int_alignment = _Alignof (int), + int_array_alignment = _Alignof (int[100]), + char_alignment = _Alignof (char) +}; +_Static_assert (0 < -_Alignof (int), "_Alignof is signed"); + +// Check _Noreturn. +int _Noreturn does_not_return (void) { for (;;) continue; } + +// Check _Static_assert. +struct test_static_assert +{ + int x; + _Static_assert (sizeof (int) <= sizeof (long int), + "_Static_assert does not work in struct"); + long int y; +}; + +// Check UTF-8 literals. +#define u8 syntax error! +char const utf8_literal[] = u8"happens to be ASCII" "another string"; + +// Check duplicate typedefs. +typedef long *long_ptr; +typedef long int *long_ptr; +typedef long_ptr long_ptr; + +// Anonymous structures and unions -- taken from C11 6.7.2.1 Example 1. +struct anonymous +{ + union { + struct { int i; int j; }; + struct { int k; long int l; } w; + }; + int m; +} v1; +' + +# Test code for whether the C compiler supports C11 (body of main). +ac_c_conftest_c11_main=' + _Static_assert ((offsetof (struct anonymous, i) + == offsetof (struct anonymous, w.k)), + "Anonymous union alignment botch"); + v1.i = 2; + v1.w.k = 5; + ok |= v1.i != 5; +' + +# Test code for whether the C compiler supports C11 (complete). +ac_c_conftest_c11_program="${ac_c_conftest_c89_globals} +${ac_c_conftest_c99_globals} +${ac_c_conftest_c11_globals} + +int +main (int argc, char **argv) +{ + int ok = 0; + ${ac_c_conftest_c89_main} + ${ac_c_conftest_c99_main} + ${ac_c_conftest_c11_main} + return ok; +} +" + +# Test code for whether the C compiler supports C99 (complete). +ac_c_conftest_c99_program="${ac_c_conftest_c89_globals} +${ac_c_conftest_c99_globals} + +int +main (int argc, char **argv) +{ + int ok = 0; + ${ac_c_conftest_c89_main} + ${ac_c_conftest_c99_main} + return ok; +} +" + +# Test code for whether the C compiler supports C89 (complete). +ac_c_conftest_c89_program="${ac_c_conftest_c89_globals} + +int +main (int argc, char **argv) +{ + int ok = 0; + ${ac_c_conftest_c89_main} + return ok; +} +" + +as_fn_append ac_header_c_list " stdio.h stdio_h HAVE_STDIO_H" +as_fn_append ac_header_c_list " stdlib.h stdlib_h HAVE_STDLIB_H" +as_fn_append ac_header_c_list " string.h string_h HAVE_STRING_H" +as_fn_append ac_header_c_list " inttypes.h inttypes_h HAVE_INTTYPES_H" +as_fn_append ac_header_c_list " stdint.h stdint_h HAVE_STDINT_H" +as_fn_append ac_header_c_list " strings.h strings_h HAVE_STRINGS_H" +as_fn_append ac_header_c_list " sys/stat.h sys_stat_h HAVE_SYS_STAT_H" +as_fn_append ac_header_c_list " sys/types.h sys_types_h HAVE_SYS_TYPES_H" +as_fn_append ac_header_c_list " unistd.h unistd_h HAVE_UNISTD_H" +as_fn_append ac_header_c_list " wchar.h wchar_h HAVE_WCHAR_H" +as_fn_append ac_header_c_list " minix/config.h minix_config_h HAVE_MINIX_CONFIG_H" +gt_needs="$gt_needs " +as_fn_append ac_header_c_list " sys/cdefs.h sys_cdefs_h HAVE_SYS_CDEFS_H" + +# Auxiliary files required by this configure script. +ac_aux_files="config.rpath install-sh ltmain.sh config.guess config.sub" + +# Locations in which to look for auxiliary files. +ac_aux_dir_candidates="${srcdir}/build/autoconf" + +# Search for a directory containing all of the required auxiliary files, +# $ac_aux_files, from the $PATH-style list $ac_aux_dir_candidates. +# If we don't find one directory that contains all the files we need, +# we report the set of missing files from the *first* directory in +# $ac_aux_dir_candidates and give up. +ac_missing_aux_files="" +ac_first_candidate=: +printf '%s\n' "$as_me:${as_lineno-$LINENO}: looking for aux files: $ac_aux_files" >&5 +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in $ac_aux_dir_candidates +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + as_found=: + + printf '%s\n' "$as_me:${as_lineno-$LINENO}: trying $as_dir" >&5 + ac_aux_dir_found=yes + ac_install_sh= + for ac_aux in $ac_aux_files + do + # As a special case, if "install-sh" is required, that requirement + # can be satisfied by any of "install-sh", "install.sh", or "shtool", + # and $ac_install_sh is set appropriately for whichever one is found. + if test x"$ac_aux" = x"install-sh" + then + if test -f "${as_dir}install-sh"; then + printf '%s\n' "$as_me:${as_lineno-$LINENO}: ${as_dir}install-sh found" >&5 + ac_install_sh="${as_dir}install-sh -c" + elif test -f "${as_dir}install.sh"; then + printf '%s\n' "$as_me:${as_lineno-$LINENO}: ${as_dir}install.sh found" >&5 + ac_install_sh="${as_dir}install.sh -c" + elif test -f "${as_dir}shtool"; then + printf '%s\n' "$as_me:${as_lineno-$LINENO}: ${as_dir}shtool found" >&5 + ac_install_sh="${as_dir}shtool install -c" + else + ac_aux_dir_found=no + if $ac_first_candidate; then + ac_missing_aux_files="${ac_missing_aux_files} install-sh" + else + break + fi + fi + else + if test -f "${as_dir}${ac_aux}"; then + printf '%s\n' "$as_me:${as_lineno-$LINENO}: ${as_dir}${ac_aux} found" >&5 + else + ac_aux_dir_found=no + if $ac_first_candidate; then + ac_missing_aux_files="${ac_missing_aux_files} ${ac_aux}" + else + break + fi + fi + fi + done + if test "$ac_aux_dir_found" = yes; then + ac_aux_dir="$as_dir" + break + fi + ac_first_candidate=false + + as_found=false +done +IFS=$as_save_IFS +if $as_found +then : + +else case e in #( + e) as_fn_error $? "cannot find required auxiliary files:$ac_missing_aux_files" "$LINENO" 5 ;; +esac +fi + + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +if test -f "${ac_aux_dir}config.guess"; then + ac_config_guess="$SHELL ${ac_aux_dir}config.guess" +fi +if test -f "${ac_aux_dir}config.sub"; then + ac_config_sub="$SHELL ${ac_aux_dir}config.sub" +fi +if test -f "$ac_aux_dir/configure"; then + ac_configure="$SHELL ${ac_aux_dir}configure" +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&5 +printf '%s\n' "$as_me: error: '$ac_var' was set to '$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: '$ac_var' was not set in the previous run" >&5 +printf '%s\n' "$as_me: error: '$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w= + for ac_val in x $ac_old_val; do + ac_old_val_w="$ac_old_val_w $ac_val" + done + ac_new_val_w= + for ac_val in x $ac_new_val; do + ac_new_val_w="$ac_new_val_w $ac_val" + done + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: '$ac_var' has changed since the previous run:" >&5 +printf '%s\n' "$as_me: error: '$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&5 +printf '%s\n' "$as_me: warning: ignoring whitespace changes in '$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: former value: '$ac_old_val'" >&5 +printf '%s\n' "$as_me: former value: '$ac_old_val'" >&2;} + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: current value: '$ac_new_val'" >&5 +printf '%s\n' "$as_me: current value: '$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`printf '%s\n' "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +printf '%s\n' "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run '${MAKE-make} distclean' and/or 'rm $cache_file' + and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + + +# Determine whether it's possible to make 'echo' print without a newline. +# These variables are no longer used directly by Autoconf, but are AC_SUBSTed +# for compatibility with existing Makefiles. +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + +ac_config_headers="$ac_config_headers cbits/config.h" + + +echo +echo "$PACKAGE_STRING" + +echo +echo "System type:" +# This is needed to know if assembler optimizations can be used. + + + + # Make sure we can run config.sub. +$SHELL "${ac_aux_dir}config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL ${ac_aux_dir}config.sub" "$LINENO" 5 + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +printf %s "checking build system type... " >&6; } +if test ${ac_cv_build+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "${ac_aux_dir}config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "${ac_aux_dir}config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $ac_build_alias failed" "$LINENO" 5 + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +printf '%s\n' "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`printf '%s\n' "$build_os" | sed 's/ /-/g'`;; esac + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +printf %s "checking host system type... " >&6; } +if test ${ac_cv_host+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "${ac_aux_dir}config.sub" $host_alias` || + as_fn_error $? "$SHELL ${ac_aux_dir}config.sub $host_alias failed" "$LINENO" 5 +fi + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +printf '%s\n' "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`printf '%s\n' "$host_os" | sed 's/ /-/g'`;; esac + + + +# We do some special things on Windows (32-bit or 64-bit) builds. +case $host_os in + mingw* | cygwin | msys) is_w32=yes ;; + *) is_w32=no ;; +esac + if test "$is_w32" = yes; then + COND_W32_TRUE= + COND_W32_FALSE='#' +else + COND_W32_TRUE='#' + COND_W32_FALSE= +fi + + +# We need to use $EXEEXT with $(LN_S) when creating symlinks to +# executables. Cygwin is an exception to this, since it is recommended +# that symlinks don't have the .exe suffix. To make this work, we +# define LN_EXEEXT. +# +# MSYS2 is treated the same way as Cygwin. It uses plain "msys" like +# the original MSYS when building MSYS/MSYS2-binaries. Hopefully this +# doesn't break things for the original MSYS developers. Note that this +# doesn't affect normal MSYS/MSYS2 users building non-MSYS/MSYS2 binaries +# since in that case the $host_os is usually mingw32. +case $host_os in + cygwin | msys) LN_EXEEXT= ;; + *) LN_EXEEXT='$(EXEEXT)' ;; +esac + + +echo +echo "Configure options:" +AM_CFLAGS= + + +############# +# Debugging # +############# + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if debugging code should be compiled" >&5 +printf %s "checking if debugging code should be compiled... " >&6; } +# Check whether --enable-debug was given. +if test ${enable_debug+y} +then : + enableval=$enable_debug; +else case e in #( + e) enable_debug=no ;; +esac +fi + +if test "x$enable_debug" = xyes; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } +else + +printf '%s\n' "#define NDEBUG 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +########### +# Filters # +########### + + + + +enable_filter_lzma1=no +enable_encoder_lzma1=no +enable_decoder_lzma1=no +enable_filter_lzma2=no +enable_encoder_lzma2=no +enable_decoder_lzma2=no +enable_filter_delta=no +enable_encoder_delta=no +enable_decoder_delta=no +enable_filter_x86=no +enable_encoder_x86=no +enable_decoder_x86=no +enable_filter_powerpc=no +enable_encoder_powerpc=no +enable_decoder_powerpc=no +enable_filter_ia64=no +enable_encoder_ia64=no +enable_decoder_ia64=no +enable_filter_arm=no +enable_encoder_arm=no +enable_decoder_arm=no +enable_filter_armthumb=no +enable_encoder_armthumb=no +enable_decoder_armthumb=no +enable_filter_arm64=no +enable_encoder_arm64=no +enable_decoder_arm64=no +enable_filter_sparc=no +enable_encoder_sparc=no +enable_decoder_sparc=no +enable_filter_riscv=no +enable_encoder_riscv=no +enable_decoder_riscv=no + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which encoders to build" >&5 +printf %s "checking which encoders to build... " >&6; } +# Check whether --enable-encoders was given. +if test ${enable_encoders+y} +then : + enableval=$enable_encoders; +else case e in #( + e) enable_encoders=lzma1,lzma2,delta,x86,powerpc,ia64,arm,armthumb,arm64,sparc,riscv ;; +esac +fi + +enable_encoders=`echo "$enable_encoders" | sed 's/,/ /g'` +if test "x$enable_encoders" = xno || test "x$enable_encoders" = x; then + enable_encoders=no + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: (none)" >&5 +printf '%s\n' "(none)" >&6; } +else + for arg in $enable_encoders + do + case $arg in + lzma1) + enable_filter_lzma1=yes + enable_encoder_lzma1=yes + +printf '%s\n' "#define HAVE_ENCODER_LZMA1 1" >>confdefs.h + + ;; + lzma2) + enable_filter_lzma2=yes + enable_encoder_lzma2=yes + +printf '%s\n' "#define HAVE_ENCODER_LZMA2 1" >>confdefs.h + + ;; + delta) + enable_filter_delta=yes + enable_encoder_delta=yes + +printf '%s\n' "#define HAVE_ENCODER_DELTA 1" >>confdefs.h + + ;; + x86) + enable_filter_x86=yes + enable_encoder_x86=yes + +printf '%s\n' "#define HAVE_ENCODER_X86 1" >>confdefs.h + + ;; + powerpc) + enable_filter_powerpc=yes + enable_encoder_powerpc=yes + +printf '%s\n' "#define HAVE_ENCODER_POWERPC 1" >>confdefs.h + + ;; + ia64) + enable_filter_ia64=yes + enable_encoder_ia64=yes + +printf '%s\n' "#define HAVE_ENCODER_IA64 1" >>confdefs.h + + ;; + arm) + enable_filter_arm=yes + enable_encoder_arm=yes + +printf '%s\n' "#define HAVE_ENCODER_ARM 1" >>confdefs.h + + ;; + armthumb) + enable_filter_armthumb=yes + enable_encoder_armthumb=yes + +printf '%s\n' "#define HAVE_ENCODER_ARMTHUMB 1" >>confdefs.h + + ;; + arm64) + enable_filter_arm64=yes + enable_encoder_arm64=yes + +printf '%s\n' "#define HAVE_ENCODER_ARM64 1" >>confdefs.h + + ;; + sparc) + enable_filter_sparc=yes + enable_encoder_sparc=yes + +printf '%s\n' "#define HAVE_ENCODER_SPARC 1" >>confdefs.h + + ;; + riscv) + enable_filter_riscv=yes + enable_encoder_riscv=yes + +printf '%s\n' "#define HAVE_ENCODER_RISCV 1" >>confdefs.h + + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "unknown filter: $arg" "$LINENO" 5 + ;; + esac + done + +printf '%s\n' "#define HAVE_ENCODERS 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_encoders" >&5 +printf '%s\n' "$enable_encoders" >&6; } +fi + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which decoders to build" >&5 +printf %s "checking which decoders to build... " >&6; } +# Check whether --enable-decoders was given. +if test ${enable_decoders+y} +then : + enableval=$enable_decoders; +else case e in #( + e) enable_decoders=lzma1,lzma2,delta,x86,powerpc,ia64,arm,armthumb,arm64,sparc,riscv ;; +esac +fi + +enable_decoders=`echo "$enable_decoders" | sed 's/,/ /g'` +if test "x$enable_decoders" = xno || test "x$enable_decoders" = x; then + enable_decoders=no + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: (none)" >&5 +printf '%s\n' "(none)" >&6; } +else + for arg in $enable_decoders + do + case $arg in + lzma1) + enable_filter_lzma1=yes + enable_decoder_lzma1=yes + +printf '%s\n' "#define HAVE_DECODER_LZMA1 1" >>confdefs.h + + ;; + lzma2) + enable_filter_lzma2=yes + enable_decoder_lzma2=yes + +printf '%s\n' "#define HAVE_DECODER_LZMA2 1" >>confdefs.h + + ;; + delta) + enable_filter_delta=yes + enable_decoder_delta=yes + +printf '%s\n' "#define HAVE_DECODER_DELTA 1" >>confdefs.h + + ;; + x86) + enable_filter_x86=yes + enable_decoder_x86=yes + +printf '%s\n' "#define HAVE_DECODER_X86 1" >>confdefs.h + + ;; + powerpc) + enable_filter_powerpc=yes + enable_decoder_powerpc=yes + +printf '%s\n' "#define HAVE_DECODER_POWERPC 1" >>confdefs.h + + ;; + ia64) + enable_filter_ia64=yes + enable_decoder_ia64=yes + +printf '%s\n' "#define HAVE_DECODER_IA64 1" >>confdefs.h + + ;; + arm) + enable_filter_arm=yes + enable_decoder_arm=yes + +printf '%s\n' "#define HAVE_DECODER_ARM 1" >>confdefs.h + + ;; + armthumb) + enable_filter_armthumb=yes + enable_decoder_armthumb=yes + +printf '%s\n' "#define HAVE_DECODER_ARMTHUMB 1" >>confdefs.h + + ;; + arm64) + enable_filter_arm64=yes + enable_decoder_arm64=yes + +printf '%s\n' "#define HAVE_DECODER_ARM64 1" >>confdefs.h + + ;; + sparc) + enable_filter_sparc=yes + enable_decoder_sparc=yes + +printf '%s\n' "#define HAVE_DECODER_SPARC 1" >>confdefs.h + + ;; + riscv) + enable_filter_riscv=yes + enable_decoder_riscv=yes + +printf '%s\n' "#define HAVE_DECODER_RISCV 1" >>confdefs.h + + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "unknown filter: $arg" "$LINENO" 5 + ;; + esac + done + +printf '%s\n' "#define HAVE_DECODERS 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_decoders" >&5 +printf '%s\n' "$enable_decoders" >&6; } +fi + +if test "x$enable_encoder_lzma2$enable_encoder_lzma1" = xyesno \ + || test "x$enable_decoder_lzma2$enable_decoder_lzma1" = xyesno; then + as_fn_error $? "LZMA2 requires that LZMA1 is also enabled." "$LINENO" 5 +fi + + if test "x$enable_encoders" != xno; then + COND_MAIN_ENCODER_TRUE= + COND_MAIN_ENCODER_FALSE='#' +else + COND_MAIN_ENCODER_TRUE='#' + COND_MAIN_ENCODER_FALSE= +fi + + if test "x$enable_decoders" != xno; then + COND_MAIN_DECODER_TRUE= + COND_MAIN_DECODER_FALSE='#' +else + COND_MAIN_DECODER_TRUE='#' + COND_MAIN_DECODER_FALSE= +fi + + + if test "x$enable_filter_lzma1" = xyes; then + COND_FILTER_LZMA1_TRUE= + COND_FILTER_LZMA1_FALSE='#' +else + COND_FILTER_LZMA1_TRUE='#' + COND_FILTER_LZMA1_FALSE= +fi + + if test "x$enable_encoder_lzma1" = xyes; then + COND_ENCODER_LZMA1_TRUE= + COND_ENCODER_LZMA1_FALSE='#' +else + COND_ENCODER_LZMA1_TRUE='#' + COND_ENCODER_LZMA1_FALSE= +fi + + if test "x$enable_decoder_lzma1" = xyes; then + COND_DECODER_LZMA1_TRUE= + COND_DECODER_LZMA1_FALSE='#' +else + COND_DECODER_LZMA1_TRUE='#' + COND_DECODER_LZMA1_FALSE= +fi + + if test "x$enable_filter_lzma2" = xyes; then + COND_FILTER_LZMA2_TRUE= + COND_FILTER_LZMA2_FALSE='#' +else + COND_FILTER_LZMA2_TRUE='#' + COND_FILTER_LZMA2_FALSE= +fi + + if test "x$enable_encoder_lzma2" = xyes; then + COND_ENCODER_LZMA2_TRUE= + COND_ENCODER_LZMA2_FALSE='#' +else + COND_ENCODER_LZMA2_TRUE='#' + COND_ENCODER_LZMA2_FALSE= +fi + + if test "x$enable_decoder_lzma2" = xyes; then + COND_DECODER_LZMA2_TRUE= + COND_DECODER_LZMA2_FALSE='#' +else + COND_DECODER_LZMA2_TRUE='#' + COND_DECODER_LZMA2_FALSE= +fi + + if test "x$enable_filter_delta" = xyes; then + COND_FILTER_DELTA_TRUE= + COND_FILTER_DELTA_FALSE='#' +else + COND_FILTER_DELTA_TRUE='#' + COND_FILTER_DELTA_FALSE= +fi + + if test "x$enable_encoder_delta" = xyes; then + COND_ENCODER_DELTA_TRUE= + COND_ENCODER_DELTA_FALSE='#' +else + COND_ENCODER_DELTA_TRUE='#' + COND_ENCODER_DELTA_FALSE= +fi + + if test "x$enable_decoder_delta" = xyes; then + COND_DECODER_DELTA_TRUE= + COND_DECODER_DELTA_FALSE='#' +else + COND_DECODER_DELTA_TRUE='#' + COND_DECODER_DELTA_FALSE= +fi + + if test "x$enable_filter_x86" = xyes; then + COND_FILTER_X86_TRUE= + COND_FILTER_X86_FALSE='#' +else + COND_FILTER_X86_TRUE='#' + COND_FILTER_X86_FALSE= +fi + + if test "x$enable_encoder_x86" = xyes; then + COND_ENCODER_X86_TRUE= + COND_ENCODER_X86_FALSE='#' +else + COND_ENCODER_X86_TRUE='#' + COND_ENCODER_X86_FALSE= +fi + + if test "x$enable_decoder_x86" = xyes; then + COND_DECODER_X86_TRUE= + COND_DECODER_X86_FALSE='#' +else + COND_DECODER_X86_TRUE='#' + COND_DECODER_X86_FALSE= +fi + + if test "x$enable_filter_powerpc" = xyes; then + COND_FILTER_POWERPC_TRUE= + COND_FILTER_POWERPC_FALSE='#' +else + COND_FILTER_POWERPC_TRUE='#' + COND_FILTER_POWERPC_FALSE= +fi + + if test "x$enable_encoder_powerpc" = xyes; then + COND_ENCODER_POWERPC_TRUE= + COND_ENCODER_POWERPC_FALSE='#' +else + COND_ENCODER_POWERPC_TRUE='#' + COND_ENCODER_POWERPC_FALSE= +fi + + if test "x$enable_decoder_powerpc" = xyes; then + COND_DECODER_POWERPC_TRUE= + COND_DECODER_POWERPC_FALSE='#' +else + COND_DECODER_POWERPC_TRUE='#' + COND_DECODER_POWERPC_FALSE= +fi + + if test "x$enable_filter_ia64" = xyes; then + COND_FILTER_IA64_TRUE= + COND_FILTER_IA64_FALSE='#' +else + COND_FILTER_IA64_TRUE='#' + COND_FILTER_IA64_FALSE= +fi + + if test "x$enable_encoder_ia64" = xyes; then + COND_ENCODER_IA64_TRUE= + COND_ENCODER_IA64_FALSE='#' +else + COND_ENCODER_IA64_TRUE='#' + COND_ENCODER_IA64_FALSE= +fi + + if test "x$enable_decoder_ia64" = xyes; then + COND_DECODER_IA64_TRUE= + COND_DECODER_IA64_FALSE='#' +else + COND_DECODER_IA64_TRUE='#' + COND_DECODER_IA64_FALSE= +fi + + if test "x$enable_filter_arm" = xyes; then + COND_FILTER_ARM_TRUE= + COND_FILTER_ARM_FALSE='#' +else + COND_FILTER_ARM_TRUE='#' + COND_FILTER_ARM_FALSE= +fi + + if test "x$enable_encoder_arm" = xyes; then + COND_ENCODER_ARM_TRUE= + COND_ENCODER_ARM_FALSE='#' +else + COND_ENCODER_ARM_TRUE='#' + COND_ENCODER_ARM_FALSE= +fi + + if test "x$enable_decoder_arm" = xyes; then + COND_DECODER_ARM_TRUE= + COND_DECODER_ARM_FALSE='#' +else + COND_DECODER_ARM_TRUE='#' + COND_DECODER_ARM_FALSE= +fi + + if test "x$enable_filter_armthumb" = xyes; then + COND_FILTER_ARMTHUMB_TRUE= + COND_FILTER_ARMTHUMB_FALSE='#' +else + COND_FILTER_ARMTHUMB_TRUE='#' + COND_FILTER_ARMTHUMB_FALSE= +fi + + if test "x$enable_encoder_armthumb" = xyes; then + COND_ENCODER_ARMTHUMB_TRUE= + COND_ENCODER_ARMTHUMB_FALSE='#' +else + COND_ENCODER_ARMTHUMB_TRUE='#' + COND_ENCODER_ARMTHUMB_FALSE= +fi + + if test "x$enable_decoder_armthumb" = xyes; then + COND_DECODER_ARMTHUMB_TRUE= + COND_DECODER_ARMTHUMB_FALSE='#' +else + COND_DECODER_ARMTHUMB_TRUE='#' + COND_DECODER_ARMTHUMB_FALSE= +fi + + if test "x$enable_filter_arm64" = xyes; then + COND_FILTER_ARM64_TRUE= + COND_FILTER_ARM64_FALSE='#' +else + COND_FILTER_ARM64_TRUE='#' + COND_FILTER_ARM64_FALSE= +fi + + if test "x$enable_encoder_arm64" = xyes; then + COND_ENCODER_ARM64_TRUE= + COND_ENCODER_ARM64_FALSE='#' +else + COND_ENCODER_ARM64_TRUE='#' + COND_ENCODER_ARM64_FALSE= +fi + + if test "x$enable_decoder_arm64" = xyes; then + COND_DECODER_ARM64_TRUE= + COND_DECODER_ARM64_FALSE='#' +else + COND_DECODER_ARM64_TRUE='#' + COND_DECODER_ARM64_FALSE= +fi + + if test "x$enable_filter_sparc" = xyes; then + COND_FILTER_SPARC_TRUE= + COND_FILTER_SPARC_FALSE='#' +else + COND_FILTER_SPARC_TRUE='#' + COND_FILTER_SPARC_FALSE= +fi + + if test "x$enable_encoder_sparc" = xyes; then + COND_ENCODER_SPARC_TRUE= + COND_ENCODER_SPARC_FALSE='#' +else + COND_ENCODER_SPARC_TRUE='#' + COND_ENCODER_SPARC_FALSE= +fi + + if test "x$enable_decoder_sparc" = xyes; then + COND_DECODER_SPARC_TRUE= + COND_DECODER_SPARC_FALSE='#' +else + COND_DECODER_SPARC_TRUE='#' + COND_DECODER_SPARC_FALSE= +fi + + if test "x$enable_filter_riscv" = xyes; then + COND_FILTER_RISCV_TRUE= + COND_FILTER_RISCV_FALSE='#' +else + COND_FILTER_RISCV_TRUE='#' + COND_FILTER_RISCV_FALSE= +fi + + if test "x$enable_encoder_riscv" = xyes; then + COND_ENCODER_RISCV_TRUE= + COND_ENCODER_RISCV_FALSE='#' +else + COND_ENCODER_RISCV_TRUE='#' + COND_ENCODER_RISCV_FALSE= +fi + + if test "x$enable_decoder_riscv" = xyes; then + COND_DECODER_RISCV_TRUE= + COND_DECODER_RISCV_FALSE='#' +else + COND_DECODER_RISCV_TRUE='#' + COND_DECODER_RISCV_FALSE= +fi + + +# The so called "simple filters" share common code. +enable_filter_simple=no +enable_encoder_simple=no +enable_decoder_simple=no +test "x$enable_filter_x86" = xyes && enable_filter_simple=yes +test "x$enable_encoder_x86" = xyes && enable_encoder_simple=yes +test "x$enable_decoder_x86" = xyes && enable_decoder_simple=yes +test "x$enable_filter_powerpc" = xyes && enable_filter_simple=yes +test "x$enable_encoder_powerpc" = xyes && enable_encoder_simple=yes +test "x$enable_decoder_powerpc" = xyes && enable_decoder_simple=yes +test "x$enable_filter_ia64" = xyes && enable_filter_simple=yes +test "x$enable_encoder_ia64" = xyes && enable_encoder_simple=yes +test "x$enable_decoder_ia64" = xyes && enable_decoder_simple=yes +test "x$enable_filter_arm" = xyes && enable_filter_simple=yes +test "x$enable_encoder_arm" = xyes && enable_encoder_simple=yes +test "x$enable_decoder_arm" = xyes && enable_decoder_simple=yes +test "x$enable_filter_armthumb" = xyes && enable_filter_simple=yes +test "x$enable_encoder_armthumb" = xyes && enable_encoder_simple=yes +test "x$enable_decoder_armthumb" = xyes && enable_decoder_simple=yes +test "x$enable_filter_arm64" = xyes && enable_filter_simple=yes +test "x$enable_encoder_arm64" = xyes && enable_encoder_simple=yes +test "x$enable_decoder_arm64" = xyes && enable_decoder_simple=yes +test "x$enable_filter_sparc" = xyes && enable_filter_simple=yes +test "x$enable_encoder_sparc" = xyes && enable_encoder_simple=yes +test "x$enable_decoder_sparc" = xyes && enable_decoder_simple=yes +test "x$enable_filter_riscv" = xyes && enable_filter_simple=yes +test "x$enable_encoder_riscv" = xyes && enable_encoder_simple=yes +test "x$enable_decoder_riscv" = xyes && enable_decoder_simple=yes + if test "x$enable_filter_simple" = xyes; then + COND_FILTER_SIMPLE_TRUE= + COND_FILTER_SIMPLE_FALSE='#' +else + COND_FILTER_SIMPLE_TRUE='#' + COND_FILTER_SIMPLE_FALSE= +fi + + if test "x$enable_encoder_simple" = xyes; then + COND_ENCODER_SIMPLE_TRUE= + COND_ENCODER_SIMPLE_FALSE='#' +else + COND_ENCODER_SIMPLE_TRUE='#' + COND_ENCODER_SIMPLE_FALSE= +fi + + if test "x$enable_decoder_simple" = xyes; then + COND_DECODER_SIMPLE_TRUE= + COND_DECODER_SIMPLE_FALSE='#' +else + COND_DECODER_SIMPLE_TRUE='#' + COND_DECODER_SIMPLE_FALSE= +fi + + +# LZ-based filters share common code. +enable_filter_lz=no +enable_encoder_lz=no +enable_decoder_lz=no +test "x$enable_filter_lzma1" = xyes && enable_filter_lz=yes +test "x$enable_encoder_lzma1" = xyes && enable_encoder_lz=yes +test "x$enable_decoder_lzma1" = xyes && enable_decoder_lz=yes +test "x$enable_filter_lzma2" = xyes && enable_filter_lz=yes +test "x$enable_encoder_lzma2" = xyes && enable_encoder_lz=yes +test "x$enable_decoder_lzma2" = xyes && enable_decoder_lz=yes + if test "x$enable_filter_lz" = xyes; then + COND_FILTER_LZ_TRUE= + COND_FILTER_LZ_FALSE='#' +else + COND_FILTER_LZ_TRUE='#' + COND_FILTER_LZ_FALSE= +fi + + if test "x$enable_encoder_lz" = xyes; then + COND_ENCODER_LZ_TRUE= + COND_ENCODER_LZ_FALSE='#' +else + COND_ENCODER_LZ_TRUE='#' + COND_ENCODER_LZ_FALSE= +fi + + if test "x$enable_decoder_lz" = xyes; then + COND_DECODER_LZ_TRUE= + COND_DECODER_LZ_FALSE='#' +else + COND_DECODER_LZ_TRUE='#' + COND_DECODER_LZ_FALSE= +fi + + + +################# +# Match finders # +################# + + + +enable_match_finder_hc3=no +enable_match_finder_hc4=no +enable_match_finder_bt2=no +enable_match_finder_bt3=no +enable_match_finder_bt4=no + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which match finders to build" >&5 +printf %s "checking which match finders to build... " >&6; } +# Check whether --enable-match-finders was given. +if test ${enable_match_finders+y} +then : + enableval=$enable_match_finders; +else case e in #( + e) enable_match_finders=hc3,hc4,bt2,bt3,bt4 ;; +esac +fi + +enable_match_finders=`echo "$enable_match_finders" | sed 's/,/ /g'` +if test "x$enable_encoder_lz" = xyes ; then + if test -z "$enable_match_finders"; then + as_fn_error $? "At least one match finder is required for an LZ-based encoder." "$LINENO" 5 + fi + + for arg in $enable_match_finders + do + case $arg in + hc3) + enable_match_finder_hc3=yes + +printf '%s\n' "#define HAVE_MF_HC3 1" >>confdefs.h + + ;; + hc4) + enable_match_finder_hc4=yes + +printf '%s\n' "#define HAVE_MF_HC4 1" >>confdefs.h + + ;; + bt2) + enable_match_finder_bt2=yes + +printf '%s\n' "#define HAVE_MF_BT2 1" >>confdefs.h + + ;; + bt3) + enable_match_finder_bt3=yes + +printf '%s\n' "#define HAVE_MF_BT3 1" >>confdefs.h + + ;; + bt4) + enable_match_finder_bt4=yes + +printf '%s\n' "#define HAVE_MF_BT4 1" >>confdefs.h + + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "unknown match finder: $arg" "$LINENO" 5 + ;; + esac + done + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_match_finders" >&5 +printf '%s\n' "$enable_match_finders" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: (none because not building any LZ-based encoder)" >&5 +printf '%s\n' "(none because not building any LZ-based encoder)" >&6; } +fi + + +#################### +# Integrity checks # +#################### + + + +enable_check_crc32=no +enable_check_crc64=no +enable_check_sha256=no + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which integrity checks to build" >&5 +printf %s "checking which integrity checks to build... " >&6; } +# Check whether --enable-checks was given. +if test ${enable_checks+y} +then : + enableval=$enable_checks; +else case e in #( + e) enable_checks=crc32,crc64,sha256 ;; +esac +fi + +enable_checks=`echo "$enable_checks" | sed 's/,/ /g'` +if test "x$enable_checks" = xno || test "x$enable_checks" = x; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: (none)" >&5 +printf '%s\n' "(none)" >&6; } +else + for arg in $enable_checks + do + case $arg in + crc32) + enable_check_crc32=yes + +printf '%s\n' "#define HAVE_CHECK_CRC32 1" >>confdefs.h + + ;; + crc64) + enable_check_crc64=yes + +printf '%s\n' "#define HAVE_CHECK_CRC64 1" >>confdefs.h + + ;; + sha256) + enable_check_sha256=yes + +printf '%s\n' "#define HAVE_CHECK_SHA256 1" >>confdefs.h + + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "unknown integrity check: $arg" "$LINENO" 5 + ;; + esac + done + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_checks" >&5 +printf '%s\n' "$enable_checks" >&6; } +fi +if test "x$enable_check_crc32" = xno ; then + as_fn_error $? "For now, the CRC32 check must always be enabled." "$LINENO" 5 +fi + + if test "x$enable_check_crc32" = xyes; then + COND_CHECK_CRC32_TRUE= + COND_CHECK_CRC32_FALSE='#' +else + COND_CHECK_CRC32_TRUE='#' + COND_CHECK_CRC32_FALSE= +fi + + if test "x$enable_check_crc64" = xyes; then + COND_CHECK_CRC64_TRUE= + COND_CHECK_CRC64_FALSE='#' +else + COND_CHECK_CRC64_TRUE='#' + COND_CHECK_CRC64_FALSE= +fi + + if test "x$enable_check_sha256" = xyes; then + COND_CHECK_SHA256_TRUE= + COND_CHECK_SHA256_FALSE='#' +else + COND_CHECK_SHA256_TRUE='#' + COND_CHECK_SHA256_FALSE= +fi + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if external SHA-256 should be used" >&5 +printf %s "checking if external SHA-256 should be used... " >&6; } +# Check whether --enable-external-sha256 was given. +if test ${enable_external_sha256+y} +then : + enableval=$enable_external_sha256; +else case e in #( + e) enable_external_sha256=no ;; +esac +fi + +if test "x$enable_check_sha256" != "xyes"; then + enable_external_sha256=no +fi +if test "x$enable_external_sha256" = xyes; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +############# +# MicroLZMA # +############# + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if MicroLZMA support should be built" >&5 +printf %s "checking if MicroLZMA support should be built... " >&6; } +# Check whether --enable-microlzma was given. +if test ${enable_microlzma+y} +then : + enableval=$enable_microlzma; +else case e in #( + e) enable_microlzma=yes ;; +esac +fi + +case $enable_microlzma in + yes | no) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_microlzma" >&5 +printf '%s\n' "$enable_microlzma" >&6; } + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "--enable-microlzma accepts only 'yes' or 'no'." "$LINENO" 5 + ;; +esac + if test "x$enable_microlzma" = xyes; then + COND_MICROLZMA_TRUE= + COND_MICROLZMA_FALSE='#' +else + COND_MICROLZMA_TRUE='#' + COND_MICROLZMA_FALSE= +fi + + + +############################# +# .lz (lzip) format support # +############################# + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if .lz (lzip) decompression support should be built" >&5 +printf %s "checking if .lz (lzip) decompression support should be built... " >&6; } +# Check whether --enable-lzip-decoder was given. +if test ${enable_lzip_decoder+y} +then : + enableval=$enable_lzip_decoder; +else case e in #( + e) enable_lzip_decoder=yes ;; +esac +fi + +if test "x$enable_decoder_lzma1" != xyes; then + enable_lzip_decoder=no + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no because LZMA1 decoder is disabled" >&5 +printf '%s\n' "no because LZMA1 decoder is disabled" >&6; } +elif test "x$enable_lzip_decoder" = xyes; then + +printf '%s\n' "#define HAVE_LZIP_DECODER 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + if test "x$enable_lzip_decoder" = xyes; then + COND_LZIP_DECODER_TRUE= + COND_LZIP_DECODER_FALSE='#' +else + COND_LZIP_DECODER_TRUE='#' + COND_LZIP_DECODER_FALSE= +fi + + + +########################### +# Assembler optimizations # +########################### + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if assembler optimizations should be used" >&5 +printf %s "checking if assembler optimizations should be used... " >&6; } +# Check whether --enable-assembler was given. +if test ${enable_assembler+y} +then : + enableval=$enable_assembler; +else case e in #( + e) enable_assembler=yes ;; +esac +fi + +if test "x$enable_assembler" = xyes; then + enable_assembler=no + case $host_os in + # Darwin should work too but only if not creating universal + # binaries. Solaris x86 could work too but I cannot test. + linux* | *bsd* | mingw* | cygwin | msys | *djgpp*) + case $host_cpu in + i?86) enable_assembler=x86 ;; + esac + ;; + esac +fi +case $enable_assembler in + x86) + +printf '%s\n' "#define HAVE_CRC_X86_ASM 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: x86" >&5 +printf '%s\n' "x86" >&6; } + ;; + no) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "--enable-assembler accepts only 'yes', 'no', or 'x86' (32-bit)." "$LINENO" 5 + ;; +esac + if test "x$enable_assembler" = xx86; then + COND_ASM_X86_TRUE= + COND_ASM_X86_FALSE='#' +else + COND_ASM_X86_TRUE='#' + COND_ASM_X86_FALSE= +fi + + + +############# +# CLMUL CRC # +############# + +# Check whether --enable-clmul-crc was given. +if test ${enable_clmul_crc+y} +then : + enableval=$enable_clmul_crc; +else case e in #( + e) enable_clmul_crc=yes ;; +esac +fi + + + +############################ +# ARM64 CRC32 Instructions # +############################ + +# Check whether --enable-arm64-crc32 was given. +if test ${enable_arm64_crc32+y} +then : + enableval=$enable_arm64_crc32; +else case e in #( + e) enable_arm64_crc32=yes ;; +esac +fi + + + +################################ +# LoongArch CRC32 instructions # +################################ + +# Check whether --enable-loongarch-crc32 was given. +if test ${enable_loongarch_crc32+y} +then : + enableval=$enable_loongarch_crc32; +else case e in #( + e) enable_loongarch_crc32=yes ;; +esac +fi + + + +##################### +# Size optimization # +##################### + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if small size is preferred over speed" >&5 +printf %s "checking if small size is preferred over speed... " >&6; } +# Check whether --enable-small was given. +if test ${enable_small+y} +then : + enableval=$enable_small; +else case e in #( + e) enable_small=no ;; +esac +fi + +if test "x$enable_small" = xyes; then + +printf '%s\n' "#define HAVE_SMALL 1" >>confdefs.h + +elif test "x$enable_small" != xno; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "--enable-small accepts only 'yes' or 'no'" "$LINENO" 5 +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_small" >&5 +printf '%s\n' "$enable_small" >&6; } + if test "x$enable_small" = xyes; then + COND_SMALL_TRUE= + COND_SMALL_FALSE='#' +else + COND_SMALL_TRUE='#' + COND_SMALL_FALSE= +fi + + + +############# +# Threading # +############# + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if threading support is wanted" >&5 +printf %s "checking if threading support is wanted... " >&6; } +# Check whether --enable-threads was given. +if test ${enable_threads+y} +then : + enableval=$enable_threads; +else case e in #( + e) enable_threads=yes ;; +esac +fi + + +if test "x$enable_threads" = xyes; then + case $host_os in + mingw*) + case $host_cpu in + i?86) enable_threads=win95 ;; + *) enable_threads=vista ;; + esac + ;; + *) + enable_threads=posix + ;; + esac +fi + +case $enable_threads in + posix | win95 | vista) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes, $enable_threads" >&5 +printf '%s\n' "yes, $enable_threads" >&6; } + ;; + no) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "--enable-threads only accepts 'yes', 'no', 'posix', 'win95', or 'vista'" "$LINENO" 5 + ;; +esac + +# We use the actual result a little later. + + +######################### +# Assumed amount of RAM # +######################### + +# We use 128 MiB as default, because it will allow decompressing files +# created with "xz -9". It would be slightly safer to guess a lower value, +# but most systems, on which we don't have any way to determine the amount +# of RAM, will probably have at least 128 MiB of RAM. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how much RAM to assume if the real amount is unknown" >&5 +printf %s "checking how much RAM to assume if the real amount is unknown... " >&6; } +# Check whether --enable-assume-ram was given. +if test ${enable_assume_ram+y} +then : + enableval=$enable_assume_ram; +else case e in #( + e) enable_assume_ram=128 ;; +esac +fi + +assume_ram_check=`echo "$enable_assume_ram" | tr -d 0123456789` +if test -z "$enable_assume_ram" || test -n "$assume_ram_check"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "--enable-assume-ram accepts only an integer argument" "$LINENO" 5 +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_assume_ram MiB" >&5 +printf '%s\n' "$enable_assume_ram MiB" >&6; } + +printf '%s\n' "#define ASSUME_RAM $enable_assume_ram" >>confdefs.h + + + +######################### +# Components to install # +######################### + +# Check whether --enable-xz was given. +if test ${enable_xz+y} +then : + enableval=$enable_xz; +else case e in #( + e) enable_xz=yes ;; +esac +fi + + if test x$enable_xz != xno; then + COND_XZ_TRUE= + COND_XZ_FALSE='#' +else + COND_XZ_TRUE='#' + COND_XZ_FALSE= +fi + + +# Check whether --enable-xzdec was given. +if test ${enable_xzdec+y} +then : + enableval=$enable_xzdec; +else case e in #( + e) enable_xzdec=yes ;; +esac +fi + +test "x$enable_decoders" = xno && enable_xzdec=no + if test x$enable_xzdec != xno; then + COND_XZDEC_TRUE= + COND_XZDEC_FALSE='#' +else + COND_XZDEC_TRUE='#' + COND_XZDEC_FALSE= +fi + + +# Check whether --enable-lzmadec was given. +if test ${enable_lzmadec+y} +then : + enableval=$enable_lzmadec; +else case e in #( + e) enable_lzmadec=yes ;; +esac +fi + +test "x$enable_decoder_lzma1" = xno && enable_lzmadec=no + if test x$enable_lzmadec != xno; then + COND_LZMADEC_TRUE= + COND_LZMADEC_FALSE='#' +else + COND_LZMADEC_TRUE='#' + COND_LZMADEC_FALSE= +fi + + +# Check whether --enable-lzmainfo was given. +if test ${enable_lzmainfo+y} +then : + enableval=$enable_lzmainfo; +else case e in #( + e) enable_lzmainfo=yes ;; +esac +fi + +test "x$enable_decoder_lzma1" = xno && enable_lzmainfo=no + if test x$enable_lzmainfo != xno; then + COND_LZMAINFO_TRUE= + COND_LZMAINFO_FALSE='#' +else + COND_LZMAINFO_TRUE='#' + COND_LZMAINFO_FALSE= +fi + + +# Check whether --enable-lzma-links was given. +if test ${enable_lzma_links+y} +then : + enableval=$enable_lzma_links; +else case e in #( + e) enable_lzma_links=yes ;; +esac +fi + + if test x$enable_lzma_links != xno; then + COND_LZMALINKS_TRUE= + COND_LZMALINKS_FALSE='#' +else + COND_LZMALINKS_TRUE='#' + COND_LZMALINKS_FALSE= +fi + + +# Check whether --enable-doc was given. +if test ${enable_doc+y} +then : + enableval=$enable_doc; +else case e in #( + e) enable_doc=yes ;; +esac +fi + + if test x$enable_doc != xno; then + COND_DOC_TRUE= + COND_DOC_FALSE='#' +else + COND_DOC_TRUE='#' + COND_DOC_FALSE= +fi + + +# Check whether --enable-doxygen was given. +if test ${enable_doxygen+y} +then : + enableval=$enable_doxygen; +else case e in #( + e) enable_doxygen=no ;; +esac +fi + + if test x$enable_doxygen != xno; then + COND_DOXYGEN_TRUE= + COND_DOXYGEN_FALSE='#' +else + COND_DOXYGEN_TRUE='#' + COND_DOXYGEN_FALSE= +fi + + + +############## +# Sandboxing # +############## + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if sandboxing should be used" >&5 +printf %s "checking if sandboxing should be used... " >&6; } +# Check whether --enable-sandbox was given. +if test ${enable_sandbox+y} +then : + enableval=$enable_sandbox; +else case e in #( + e) enable_sandbox=auto ;; +esac +fi + +case $enable_xzdec-$enable_xz-$enable_sandbox in + no-no-*) + enable_sandbox=no + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, --disable-xz and --disable-xzdec was used" >&5 +printf '%s\n' "no, --disable-xz and --disable-xzdec was used" >&6; } + ;; + *-*-auto) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: maybe (autodetect)" >&5 +printf '%s\n' "maybe (autodetect)" >&6; } + ;; + *-*-no | *-*-capsicum | *-*-pledge | *-*-landlock) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_sandbox" >&5 +printf '%s\n' "$enable_sandbox" >&6; } + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "--enable-sandbox only accepts 'auto', 'no', 'capsicum', 'pledge', or 'landlock'." "$LINENO" 5 + ;; +esac + + +############################################################################### +# Checks for programs. +############################################################################### + + + +# We don't use "subdir-objects" yet because it breaks "make distclean" when +# dependencies are enabled (as of Automake 1.14.1) due to this bug: +# https://debbugs.gnu.org/cgi/bugreport.cgi?bug=17354 +# The -Wno-unsupported is used to silence warnings about missing +# "subdir-objects". +#AM_INIT_AUTOMAKE([1.12 foreign tar-v7 filename-length-max=99 -Wno-unsupported]) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 +printf %s "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 +printf '%s\n' "no, using $LN_S" >&6; } +fi + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_CC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +printf '%s\n' "$CC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_CC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +printf '%s\n' "$ac_ct_CC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_CC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +printf '%s\n' "$CC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_CC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + if test "$as_dir$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir$ac_word${1+' '}$@" + fi +fi +fi ;; +esac +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +printf '%s\n' "$CC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_CC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +printf '%s\n' "$CC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_CC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +printf '%s\n' "$ac_ct_CC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}clang", so it can be a program name with args. +set dummy ${ac_tool_prefix}clang; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_CC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}clang" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +printf '%s\n' "$CC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "clang", so it can be a program name with args. +set dummy clang; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_CC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="clang" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +printf '%s\n' "$ac_ct_CC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +fi + + +test -z "$CC" && { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See 'config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion -version; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +printf %s "checking whether the C compiler works... " >&6; } +ac_link_default=`printf '%s\n' "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +then : + # Autoconf-2.13 could set the ac_cv_exeext variable to 'no'. +# So ignore a value of 'no', otherwise this would lead to 'EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test ${ac_cv_exeext+y} && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an '-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else case e in #( + e) ac_file='' ;; +esac +fi +if test -z "$ac_file" +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +printf '%s\n' "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See 'config.log' for more details" "$LINENO" 5; } +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +printf %s "checking for C compiler default output file name... " >&6; } +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +printf '%s\n' "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +printf %s "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +then : + # If both 'conftest.exe' and 'conftest' are 'present' (well, observable) +# catch 'conftest.exe'. For instance with Cygwin, 'ls conftest' will +# work properly (i.e., refer to 'conftest.exe'), while it won't with +# 'rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else case e in #( + e) { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See 'config.log' for more details" "$LINENO" 5; } ;; +esac +fi +rm -f conftest conftest$ac_cv_exeext +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +printf '%s\n' "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main (void) +{ +FILE *f = fopen ("conftest.out", "w"); + if (!f) + return 1; + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +printf %s "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error 77 "cannot run C compiled programs. +If you meant to cross compile, use '--host'. +See 'config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +printf '%s\n' "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext \ + conftest.o conftest.obj conftest.out +ac_clean_files=$ac_clean_files_save +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +printf %s "checking for suffix of object files... " >&6; } +if test ${ac_cv_objext+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +printf '%s\n' "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else case e in #( + e) printf '%s\n' "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See 'config.log' for more details" "$LINENO" 5; } ;; +esac +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +printf '%s\n' "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the compiler supports GNU C" >&5 +printf %s "checking whether the compiler supports GNU C... " >&6; } +if test ${ac_cv_c_compiler_gnu+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_compiler_gnu=yes +else case e in #( + e) ac_compiler_gnu=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +printf '%s\n' "$ac_cv_c_compiler_gnu" >&6; } +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+y} +ac_save_CFLAGS=$CFLAGS +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +printf %s "checking whether $CC accepts -g... " >&6; } +if test ${ac_cv_prog_cc_g+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_prog_cc_g=yes +else case e in #( + e) CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + +else case e in #( + e) ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +printf '%s\n' "$ac_cv_prog_cc_g" >&6; } +if test $ac_test_CFLAGS; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +ac_prog_cc_stdc=no +if test x$ac_prog_cc_stdc = xno +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C23 features" >&5 +printf %s "checking for $CC option to enable C23 features... " >&6; } +if test ${ac_cv_prog_cc_c23+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_cv_prog_cc_c23=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_c_conftest_c23_program +_ACEOF +for ac_arg in '' -std=gnu23 +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_prog_cc_c23=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam + test "x$ac_cv_prog_cc_c23" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC ;; +esac +fi + +if test "x$ac_cv_prog_cc_c23" = xno +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +printf '%s\n' "unsupported" >&6; } +else case e in #( + e) if test "x$ac_cv_prog_cc_c23" = x +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +printf '%s\n' "none needed" >&6; } +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c23" >&5 +printf '%s\n' "$ac_cv_prog_cc_c23" >&6; } + CC="$CC $ac_cv_prog_cc_c23" ;; +esac +fi + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c23 + ac_prog_cc_stdc=c23 ;; +esac +fi +fi +if test x$ac_prog_cc_stdc = xno +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C11 features" >&5 +printf %s "checking for $CC option to enable C11 features... " >&6; } +if test ${ac_cv_prog_cc_c11+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_cv_prog_cc_c11=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_c_conftest_c11_program +_ACEOF +for ac_arg in '' -std=gnu11 -std:c11 +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_prog_cc_c11=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam + test "x$ac_cv_prog_cc_c11" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC ;; +esac +fi + +if test "x$ac_cv_prog_cc_c11" = xno +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +printf '%s\n' "unsupported" >&6; } +else case e in #( + e) if test "x$ac_cv_prog_cc_c11" = x +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +printf '%s\n' "none needed" >&6; } +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c11" >&5 +printf '%s\n' "$ac_cv_prog_cc_c11" >&6; } + CC="$CC $ac_cv_prog_cc_c11" ;; +esac +fi + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c11 + ac_prog_cc_stdc=c11 ;; +esac +fi +fi +if test x$ac_prog_cc_stdc = xno +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C99 features" >&5 +printf %s "checking for $CC option to enable C99 features... " >&6; } +if test ${ac_cv_prog_cc_c99+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_cv_prog_cc_c99=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_c_conftest_c99_program +_ACEOF +for ac_arg in '' -std=gnu99 -std=c99 -c99 -qlanglvl=extc1x -qlanglvl=extc99 -AC99 -D_STDC_C99= +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_prog_cc_c99=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam + test "x$ac_cv_prog_cc_c99" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC ;; +esac +fi + +if test "x$ac_cv_prog_cc_c99" = xno +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +printf '%s\n' "unsupported" >&6; } +else case e in #( + e) if test "x$ac_cv_prog_cc_c99" = x +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +printf '%s\n' "none needed" >&6; } +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c99" >&5 +printf '%s\n' "$ac_cv_prog_cc_c99" >&6; } + CC="$CC $ac_cv_prog_cc_c99" ;; +esac +fi + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c99 + ac_prog_cc_stdc=c99 ;; +esac +fi +fi +if test x$ac_prog_cc_stdc = xno +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to enable C89 features" >&5 +printf %s "checking for $CC option to enable C89 features... " >&6; } +if test ${ac_cv_prog_cc_c89+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_c_conftest_c89_program +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC ;; +esac +fi + +if test "x$ac_cv_prog_cc_c89" = xno +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +printf '%s\n' "unsupported" >&6; } +else case e in #( + e) if test "x$ac_cv_prog_cc_c89" = x +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +printf '%s\n' "none needed" >&6; } +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +printf '%s\n' "$ac_cv_prog_cc_c89" >&6; } + CC="$CC $ac_cv_prog_cc_c89" ;; +esac +fi + ac_cv_prog_cc_stdc=$ac_cv_prog_cc_c89 + ac_prog_cc_stdc=c89 ;; +esac +fi +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +if test x$ac_cv_prog_cc_c99 = xno ; then + as_fn_error $? "No C99 compiler was found." "$LINENO" 5 +fi + +#AM_PROG_CC_C_O +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 +printf %s "checking whether ${MAKE-make} supports the include directive... " >&6; } +cat > confinc.mk << 'END' +am__doit: + @echo this is the am__doit target >confinc.out +.PHONY: am__doit +END +am__include="#" +am__quote= +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 + (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + case $?:`cat confinc.out 2>/dev/null` in #( + '0:this is the am__doit target') : + case $s in #( + BSD) : + am__include='.include' am__quote='"' ;; #( + *) : + am__include='include' am__quote='' ;; +esac ;; #( + *) : + ;; +esac + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 +printf '%s\n' "${_am_result}" >&6; } + +# Check whether --enable-dependency-tracking was given. +if test ${enable_dependency_tracking+y} +then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + +# By default we simply use the C compiler to build assembly code. + +test "${CCAS+set}" = set || CCAS=$CC +test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS + + + +depcc="$CCAS" am_compiler_list= + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +printf %s "checking dependency style of $depcc... " >&6; } +if test ${am_cv_CCAS_dependencies_compiler_type+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CCAS_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thus: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CCAS_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CCAS_dependencies_compiler_type=none +fi + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5 +printf '%s\n' "$am_cv_CCAS_dependencies_compiler_type" >&6; } +CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then + am__fastdepCCAS_TRUE= + am__fastdepCCAS_FALSE='#' +else + am__fastdepCCAS_TRUE='#' + am__fastdepCCAS_FALSE= +fi + + + +ac_header= ac_cache= +for ac_item in $ac_header_c_list +do + if test $ac_cache; then + ac_fn_c_check_header_compile "$LINENO" $ac_header ac_cv_header_$ac_cache "$ac_includes_default" + if eval test \"x\$ac_cv_header_$ac_cache\" = xyes; then + printf '%s\n' "#define $ac_item 1" >> confdefs.h + fi + ac_header= ac_cache= + elif test $ac_header; then + ac_cache=$ac_item + else + ac_header=$ac_item + fi +done + + + + + + + + +if test $ac_cv_header_stdlib_h = yes && test $ac_cv_header_string_h = yes +then : + +printf '%s\n' "#define STDC_HEADERS 1" >>confdefs.h + +fi + + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 +printf %s "checking whether it is safe to define __EXTENSIONS__... " >&6; } +if test ${ac_cv_safe_to_define___extensions__+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +# define __EXTENSIONS__ 1 + $ac_includes_default +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_safe_to_define___extensions__=yes +else case e in #( + e) ac_cv_safe_to_define___extensions__=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 +printf '%s\n' "$ac_cv_safe_to_define___extensions__" >&6; } + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether _XOPEN_SOURCE should be defined" >&5 +printf %s "checking whether _XOPEN_SOURCE should be defined... " >&6; } +if test ${ac_cv_should_define__xopen_source+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_cv_should_define__xopen_source=no + if test $ac_cv_header_wchar_h = yes +then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #include + mbstate_t x; +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #define _XOPEN_SOURCE 500 + #include + mbstate_t x; +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_should_define__xopen_source=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +fi ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_should_define__xopen_source" >&5 +printf '%s\n' "$ac_cv_should_define__xopen_source" >&6; } + + printf '%s\n' "#define _ALL_SOURCE 1" >>confdefs.h + + printf '%s\n' "#define _COSMO_SOURCE 1" >>confdefs.h + + printf '%s\n' "#define _DARWIN_C_SOURCE 1" >>confdefs.h + + printf '%s\n' "#define _GNU_SOURCE 1" >>confdefs.h + + printf '%s\n' "#define _HPUX_ALT_XOPEN_SOCKET_API 1" >>confdefs.h + + printf '%s\n' "#define _NETBSD_SOURCE 1" >>confdefs.h + + printf '%s\n' "#define _OPENBSD_SOURCE 1" >>confdefs.h + + printf '%s\n' "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h + + printf '%s\n' "#define __STDC_WANT_IEC_60559_ATTRIBS_EXT__ 1" >>confdefs.h + + printf '%s\n' "#define __STDC_WANT_IEC_60559_BFP_EXT__ 1" >>confdefs.h + + printf '%s\n' "#define __STDC_WANT_IEC_60559_DFP_EXT__ 1" >>confdefs.h + + printf '%s\n' "#define __STDC_WANT_IEC_60559_EXT__ 1" >>confdefs.h + + printf '%s\n' "#define __STDC_WANT_IEC_60559_FUNCS_EXT__ 1" >>confdefs.h + + printf '%s\n' "#define __STDC_WANT_IEC_60559_TYPES_EXT__ 1" >>confdefs.h + + printf '%s\n' "#define __STDC_WANT_LIB_EXT2__ 1" >>confdefs.h + + printf '%s\n' "#define __STDC_WANT_MATH_SPEC_FUNCS__ 1" >>confdefs.h + + printf '%s\n' "#define _TANDEM_SOURCE 1" >>confdefs.h + + if test $ac_cv_header_minix_config_h = yes +then : + MINIX=yes + printf '%s\n' "#define _MINIX 1" >>confdefs.h + + printf '%s\n' "#define _POSIX_SOURCE 1" >>confdefs.h + + printf '%s\n' "#define _POSIX_1_SOURCE 2" >>confdefs.h + +else case e in #( + e) MINIX= ;; +esac +fi + if test $ac_cv_safe_to_define___extensions__ = yes +then : + printf '%s\n' "#define __EXTENSIONS__ 1" >>confdefs.h + +fi + if test $ac_cv_should_define__xopen_source = yes +then : + printf '%s\n' "#define _XOPEN_SOURCE 500" >>confdefs.h + +fi + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +printf %s "checking for a sed that does not truncate output... " >&6; } +if test ${ac_cv_path_SED+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in sed gsed + do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in #( +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +#( +*) + ac_count=0 + printf %s 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + printf '%s\n' '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +printf '%s\n' "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +printf %s "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test ${ac_cv_prog_CPP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) # Double quotes because $CC needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" cpp /lib/cpp + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO" +then : + +else case e in #( + e) # Broken: fails on valid input. +continue ;; +esac +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO" +then : + # Broken: success on invalid input. +continue +else case e in #( + e) # Passes both tests. +ac_preproc_ok=: +break ;; +esac +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of 'break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok +then : + break +fi + + done + ac_cv_prog_CPP=$CPP + ;; +esac +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +printf '%s\n' "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO" +then : + +else case e in #( + e) # Broken: fails on valid input. +continue ;; +esac +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO" +then : + # Broken: success on invalid input. +continue +else case e in #( + e) # Passes both tests. +ac_preproc_ok=: +break ;; +esac +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of 'break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok +then : + +else case e in #( + e) { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See 'config.log' for more details" "$LINENO" 5; } ;; +esac +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for egrep -e" >&5 +printf %s "checking for egrep -e... " >&6; } +if test ${ac_cv_path_EGREP_TRADITIONAL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -z "$EGREP_TRADITIONAL"; then + ac_path_EGREP_TRADITIONAL_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in grep ggrep + do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP_TRADITIONAL="$as_dir$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP_TRADITIONAL" || continue +# Check for GNU ac_path_EGREP_TRADITIONAL and select it if it is found. + # Check for GNU $ac_path_EGREP_TRADITIONAL +case `"$ac_path_EGREP_TRADITIONAL" --version 2>&1` in #( +*GNU*) + ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_found=:;; +#( +*) + ac_count=0 + printf %s 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + printf '%s\n' 'EGREP_TRADITIONAL' >> "conftest.nl" + "$ac_path_EGREP_TRADITIONAL" -E 'EGR(EP|AC)_TRADITIONAL$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_TRADITIONAL_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" + ac_path_EGREP_TRADITIONAL_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_TRADITIONAL_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP_TRADITIONAL"; then + : + fi +else + ac_cv_path_EGREP_TRADITIONAL=$EGREP_TRADITIONAL +fi + + if test "$ac_cv_path_EGREP_TRADITIONAL" +then : + ac_cv_path_EGREP_TRADITIONAL="$ac_cv_path_EGREP_TRADITIONAL -E" +else case e in #( + e) if test -z "$EGREP_TRADITIONAL"; then + ac_path_EGREP_TRADITIONAL_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in egrep + do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP_TRADITIONAL="$as_dir$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP_TRADITIONAL" || continue +# Check for GNU ac_path_EGREP_TRADITIONAL and select it if it is found. + # Check for GNU $ac_path_EGREP_TRADITIONAL +case `"$ac_path_EGREP_TRADITIONAL" --version 2>&1` in #( +*GNU*) + ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" ac_path_EGREP_TRADITIONAL_found=:;; +#( +*) + ac_count=0 + printf %s 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + printf '%s\n' 'EGREP_TRADITIONAL' >> "conftest.nl" + "$ac_path_EGREP_TRADITIONAL" 'EGR(EP|AC)_TRADITIONAL$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_TRADITIONAL_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP_TRADITIONAL="$ac_path_EGREP_TRADITIONAL" + ac_path_EGREP_TRADITIONAL_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_TRADITIONAL_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP_TRADITIONAL"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP_TRADITIONAL=$EGREP_TRADITIONAL +fi + ;; +esac +fi ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP_TRADITIONAL" >&5 +printf '%s\n' "$ac_cv_path_EGREP_TRADITIONAL" >&6; } + EGREP_TRADITIONAL=$ac_cv_path_EGREP_TRADITIONAL + +case $enable_threads in #( + posix) : + + echo + echo "POSIX threading support:" + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ax_pthread_ok=no + +# We used to check for pthread.h first, but this fails if pthread.h +# requires special compiler flags (e.g. on Tru64 or Sequent). +# It gets checked for in the link test anyway. + +# First of all, check if the user has set any of the PTHREAD_LIBS, +# etcetera environment variables, and if threads linking works using +# them: +if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then + ax_pthread_save_CC="$CC" + ax_pthread_save_CFLAGS="$CFLAGS" + ax_pthread_save_LIBS="$LIBS" + if test "x$PTHREAD_CC" != "x" +then : + CC="$PTHREAD_CC" +fi + if test "x$PTHREAD_CXX" != "x" +then : + CXX="$PTHREAD_CXX" +fi + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS" >&5 +printf %s "checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. + The 'extern "C"' is for builds by C++ compilers; + although this is not generally supported in C code supporting it here + has little cost and some practical benefit (sr 110532). */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_join (void); +int +main (void) +{ +return pthread_join (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ax_pthread_ok=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5 +printf '%s\n' "$ax_pthread_ok" >&6; } + if test "x$ax_pthread_ok" = "xno"; then + PTHREAD_LIBS="" + PTHREAD_CFLAGS="" + fi + CC="$ax_pthread_save_CC" + CFLAGS="$ax_pthread_save_CFLAGS" + LIBS="$ax_pthread_save_LIBS" +fi + +# We must check for the threads library under a number of different +# names; the ordering is very important because some systems +# (e.g. DEC) have both -lpthread and -lpthreads, where one of the +# libraries is broken (non-POSIX). + +# Create a list of thread flags to try. Items with a "," contain both +# C compiler flags (before ",") and linker flags (after ","). Other items +# starting with a "-" are C compiler flags, and remaining items are +# library names, except for "none" which indicates that we try without +# any flags at all, and "pthread-config" which is a program returning +# the flags for the Pth emulation library. + +ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" + +# The ordering *is* (sometimes) important. Some notes on the +# individual items follow: + +# pthreads: AIX (must check this before -lpthread) +# none: in case threads are in libc; should be tried before -Kthread and +# other compiler flags to prevent continual compiler warnings +# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) +# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64 +# (Note: HP C rejects this with "bad form for `-t' option") +# -pthreads: Solaris/gcc (Note: HP C also rejects) +# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it +# doesn't hurt to check since this sometimes defines pthreads and +# -D_REENTRANT too), HP C (must be checked before -lpthread, which +# is present but should not be used directly; and before -mthreads, +# because the compiler interprets this as "-mt" + "-hreads") +# -mthreads: Mingw32/gcc, Lynx/gcc +# pthread: Linux, etcetera +# --thread-safe: KAI C++ +# pthread-config: use pthread-config program (for GNU Pth library) + +case $host_os in + + freebsd*) + + # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) + # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) + + ax_pthread_flags="-kthread lthread $ax_pthread_flags" + ;; + + hpux*) + + # From the cc(1) man page: "[-mt] Sets various -D flags to enable + # multi-threading and also sets -lpthread." + + ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags" + ;; + + openedition*) + + # IBM z/OS requires a feature-test macro to be defined in order to + # enable POSIX threads at all, so give the user a hint if this is + # not set. (We don't define these ourselves, as they can affect + # other portions of the system API in unpredictable ways.) + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS) + AX_PTHREAD_ZOS_MISSING +# endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP_TRADITIONAL "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1 +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&5 +printf '%s\n' "$as_me: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&2;} +fi +rm -rf conftest* + + ;; + + solaris*) + + # On Solaris (at least, for some versions), libc contains stubbed + # (non-functional) versions of the pthreads routines, so link-based + # tests will erroneously succeed. (N.B.: The stubs are missing + # pthread_cleanup_push, or rather a function called by this macro, + # so we could check for that, but who knows whether they'll stub + # that too in a future libc.) So we'll check first for the + # standard Solaris way of linking pthreads (-mt -lpthread). + + ax_pthread_flags="-mt,-lpthread pthread $ax_pthread_flags" + ;; +esac + +# Are we compiling with Clang? + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether $CC is Clang" >&5 +printf %s "checking whether $CC is Clang... " >&6; } +if test ${ax_cv_PTHREAD_CLANG+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ax_cv_PTHREAD_CLANG=no + # Note that Autoconf sets GCC=yes for Clang as well as GCC + if test "x$GCC" = "xyes"; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Note: Clang 2.7 lacks __clang_[a-z]+__ */ +# if defined(__clang__) && defined(__llvm__) + AX_PTHREAD_CC_IS_CLANG +# endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP_TRADITIONAL "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1 +then : + ax_cv_PTHREAD_CLANG=yes +fi +rm -rf conftest* + + fi + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG" >&5 +printf '%s\n' "$ax_cv_PTHREAD_CLANG" >&6; } +ax_pthread_clang="$ax_cv_PTHREAD_CLANG" + + +# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC) + +# Note that for GCC and Clang -pthread generally implies -lpthread, +# except when -nostdlib is passed. +# This is problematic using libtool to build C++ shared libraries with pthread: +# [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=25460 +# [2] https://bugzilla.redhat.com/show_bug.cgi?id=661333 +# [3] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=468555 +# To solve this, first try -pthread together with -lpthread for GCC + +if test "x$GCC" = "xyes" +then : + ax_pthread_flags="-pthread,-lpthread -pthread -pthreads $ax_pthread_flags" +fi + +# Clang takes -pthread (never supported any other flag), but we'll try with -lpthread first + +if test "x$ax_pthread_clang" = "xyes" +then : + ax_pthread_flags="-pthread,-lpthread -pthread" +fi + + +# The presence of a feature test macro requesting re-entrant function +# definitions is, on some systems, a strong hint that pthreads support is +# correctly enabled + +case $host_os in + darwin* | hpux* | linux* | osf* | solaris*) + ax_pthread_check_macro="_REENTRANT" + ;; + + aix*) + ax_pthread_check_macro="_THREAD_SAFE" + ;; + + *) + ax_pthread_check_macro="--" + ;; +esac +if test "x$ax_pthread_check_macro" = "x--" +then : + ax_pthread_check_cond=0 +else case e in #( + e) ax_pthread_check_cond="!defined($ax_pthread_check_macro)" ;; +esac +fi + + +if test "x$ax_pthread_ok" = "xno"; then +for ax_pthread_try_flag in $ax_pthread_flags; do + + case $ax_pthread_try_flag in + none) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether pthreads work without any flags" >&5 +printf %s "checking whether pthreads work without any flags... " >&6; } + ;; + + *,*) + PTHREAD_CFLAGS=`echo $ax_pthread_try_flag | sed "s/^\(.*\),\(.*\)$/\1/"` + PTHREAD_LIBS=`echo $ax_pthread_try_flag | sed "s/^\(.*\),\(.*\)$/\2/"` + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with \"$PTHREAD_CFLAGS\" and \"$PTHREAD_LIBS\"" >&5 +printf %s "checking whether pthreads work with \"$PTHREAD_CFLAGS\" and \"$PTHREAD_LIBS\"... " >&6; } + ;; + + -*) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $ax_pthread_try_flag" >&5 +printf %s "checking whether pthreads work with $ax_pthread_try_flag... " >&6; } + PTHREAD_CFLAGS="$ax_pthread_try_flag" + ;; + + pthread-config) + # Extract the first word of "pthread-config", so it can be a program name with args. +set dummy pthread-config; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ax_pthread_config+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ax_pthread_config"; then + ac_cv_prog_ax_pthread_config="$ax_pthread_config" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ax_pthread_config="yes" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_prog_ax_pthread_config" && ac_cv_prog_ax_pthread_config="no" +fi ;; +esac +fi +ax_pthread_config=$ac_cv_prog_ax_pthread_config +if test -n "$ax_pthread_config"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_config" >&5 +printf '%s\n' "$ax_pthread_config" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + if test "x$ax_pthread_config" = "xno" +then : + continue +fi + PTHREAD_CFLAGS="`pthread-config --cflags`" + PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" + ;; + + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$ax_pthread_try_flag" >&5 +printf %s "checking for the pthreads library -l$ax_pthread_try_flag... " >&6; } + PTHREAD_LIBS="-l$ax_pthread_try_flag" + ;; + esac + + ax_pthread_save_CFLAGS="$CFLAGS" + ax_pthread_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + + # Check for various functions. We must include pthread.h, + # since some functions may be macros. (On the Sequent, we + # need a special flag -Kthread to make this header compile.) + # We check for pthread_join because it is in -lpthread on IRIX + # while pthread_create is in libc. We check for pthread_attr_init + # due to DEC craziness with -lpthreads. We check for + # pthread_cleanup_push because it is one of the few pthread + # functions on Solaris that doesn't have a non-functional libc stub. + # We try pthread_create on general principles. + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +# if $ax_pthread_check_cond +# error "$ax_pthread_check_macro must be defined" +# endif + static void *some_global = NULL; + static void routine(void *a) + { + /* To avoid any unused-parameter or + unused-but-set-parameter warning. */ + some_global = a; + } + static void *start_routine(void *a) { return a; } +int +main (void) +{ +pthread_t th; pthread_attr_t attr; + pthread_create(&th, 0, start_routine, 0); + pthread_join(th, 0); + pthread_attr_init(&attr); + pthread_cleanup_push(routine, 0); + pthread_cleanup_pop(0) /* ; */ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ax_pthread_ok=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + + CFLAGS="$ax_pthread_save_CFLAGS" + LIBS="$ax_pthread_save_LIBS" + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5 +printf '%s\n' "$ax_pthread_ok" >&6; } + if test "x$ax_pthread_ok" = "xyes" +then : + break +fi + + PTHREAD_LIBS="" + PTHREAD_CFLAGS="" +done +fi + + +# Clang needs special handling, because older versions handle the -pthread +# option in a rather... idiosyncratic way + +if test "x$ax_pthread_clang" = "xyes"; then + + # Clang takes -pthread; it has never supported any other flag + + # (Note 1: This will need to be revisited if a system that Clang + # supports has POSIX threads in a separate library. This tends not + # to be the way of modern systems, but it's conceivable.) + + # (Note 2: On some systems, notably Darwin, -pthread is not needed + # to get POSIX threads support; the API is always present and + # active. We could reasonably leave PTHREAD_CFLAGS empty. But + # -pthread does define _REENTRANT, and while the Darwin headers + # ignore this macro, third-party headers might not.) + + # However, older versions of Clang make a point of warning the user + # that, in an invocation where only linking and no compilation is + # taking place, the -pthread option has no effect ("argument unused + # during compilation"). They expect -pthread to be passed in only + # when source code is being compiled. + # + # Problem is, this is at odds with the way Automake and most other + # C build frameworks function, which is that the same flags used in + # compilation (CFLAGS) are also used in linking. Many systems + # supported by AX_PTHREAD require exactly this for POSIX threads + # support, and in fact it is often not straightforward to specify a + # flag that is used only in the compilation phase and not in + # linking. Such a scenario is extremely rare in practice. + # + # Even though use of the -pthread flag in linking would only print + # a warning, this can be a nuisance for well-run software projects + # that build with -Werror. So if the active version of Clang has + # this misfeature, we search for an option to squash it. + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread" >&5 +printf %s "checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread... " >&6; } +if test ${ax_cv_PTHREAD_CLANG_NO_WARN_FLAG+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown + # Create an alternate version of $ac_link that compiles and + # links in two steps (.c -> .o, .o -> exe) instead of one + # (.c -> exe), because the warning occurs only in the second + # step + ax_pthread_save_ac_link="$ac_link" + ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g' + ax_pthread_link_step=`printf '%s\n' "$ac_link" | sed "$ax_pthread_sed"` + ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)" + ax_pthread_save_CFLAGS="$CFLAGS" + for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do + if test "x$ax_pthread_try" = "xunknown" +then : + break +fi + CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS" + ac_link="$ax_pthread_save_ac_link" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int main(void){return 0;} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ac_link="$ax_pthread_2step_ac_link" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int main(void){return 0;} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + break +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + done + ac_link="$ax_pthread_save_ac_link" + CFLAGS="$ax_pthread_save_CFLAGS" + if test "x$ax_pthread_try" = "x" +then : + ax_pthread_try=no +fi + ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try" + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&5 +printf '%s\n' "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&6; } + + case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in + no | unknown) ;; + *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;; + esac + +fi # $ax_pthread_clang = yes + + + +# Various other checks: +if test "x$ax_pthread_ok" = "xyes"; then + ax_pthread_save_CFLAGS="$CFLAGS" + ax_pthread_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + + # Detect AIX lossage: JOINABLE attribute is called UNDETACHED. + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5 +printf %s "checking for joinable pthread attribute... " >&6; } +if test ${ax_cv_PTHREAD_JOINABLE_ATTR+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ax_cv_PTHREAD_JOINABLE_ATTR=unknown + for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main (void) +{ +int attr = $ax_pthread_attr; return attr /* ; */ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + done + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_JOINABLE_ATTR" >&5 +printf '%s\n' "$ax_cv_PTHREAD_JOINABLE_ATTR" >&6; } + if test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \ + test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \ + test "x$ax_pthread_joinable_attr_defined" != "xyes" +then : + +printf '%s\n' "#define PTHREAD_CREATE_JOINABLE $ax_cv_PTHREAD_JOINABLE_ATTR" >>confdefs.h + + ax_pthread_joinable_attr_defined=yes + +fi + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether more special flags are required for pthreads" >&5 +printf %s "checking whether more special flags are required for pthreads... " >&6; } +if test ${ax_cv_PTHREAD_SPECIAL_FLAGS+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ax_cv_PTHREAD_SPECIAL_FLAGS=no + case $host_os in + solaris*) + ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS" + ;; + esac + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_SPECIAL_FLAGS" >&5 +printf '%s\n' "$ax_cv_PTHREAD_SPECIAL_FLAGS" >&6; } + if test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \ + test "x$ax_pthread_special_flags_added" != "xyes" +then : + PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS" + ax_pthread_special_flags_added=yes +fi + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for PTHREAD_PRIO_INHERIT" >&5 +printf %s "checking for PTHREAD_PRIO_INHERIT... " >&6; } +if test ${ax_cv_PTHREAD_PRIO_INHERIT+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main (void) +{ +int i = PTHREAD_PRIO_INHERIT; + return i; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ax_cv_PTHREAD_PRIO_INHERIT=yes +else case e in #( + e) ax_cv_PTHREAD_PRIO_INHERIT=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_PRIO_INHERIT" >&5 +printf '%s\n' "$ax_cv_PTHREAD_PRIO_INHERIT" >&6; } + if test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \ + test "x$ax_pthread_prio_inherit_defined" != "xyes" +then : + +printf '%s\n' "#define HAVE_PTHREAD_PRIO_INHERIT 1" >>confdefs.h + + ax_pthread_prio_inherit_defined=yes + +fi + + CFLAGS="$ax_pthread_save_CFLAGS" + LIBS="$ax_pthread_save_LIBS" + + # More AIX lossage: compile with *_r variant + if test "x$GCC" != "xyes"; then + case $host_os in + aix*) + case "x/$CC" in #( + x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6) : + #handle absolute path differently from PATH based program lookup + case "x$CC" in #( + x/*) : + + if as_fn_executable_p ${CC}_r +then : + PTHREAD_CC="${CC}_r" +fi + if test "x${CXX}" != "x" +then : + if as_fn_executable_p ${CXX}_r +then : + PTHREAD_CXX="${CXX}_r" +fi +fi + ;; #( + *) : + + for ac_prog in ${CC}_r +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_PTHREAD_CC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$PTHREAD_CC"; then + ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_PTHREAD_CC="$ac_prog" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +PTHREAD_CC=$ac_cv_prog_PTHREAD_CC +if test -n "$PTHREAD_CC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CC" >&5 +printf '%s\n' "$PTHREAD_CC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + test -n "$PTHREAD_CC" && break +done +test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" + + if test "x${CXX}" != "x" +then : + for ac_prog in ${CXX}_r +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_PTHREAD_CXX+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$PTHREAD_CXX"; then + ac_cv_prog_PTHREAD_CXX="$PTHREAD_CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_PTHREAD_CXX="$ac_prog" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +PTHREAD_CXX=$ac_cv_prog_PTHREAD_CXX +if test -n "$PTHREAD_CXX"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CXX" >&5 +printf '%s\n' "$PTHREAD_CXX" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + test -n "$PTHREAD_CXX" && break +done +test -n "$PTHREAD_CXX" || PTHREAD_CXX="$CXX" + +fi + + ;; +esac + ;; #( + *) : + ;; +esac + ;; + esac + fi +fi + +test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" +test -n "$PTHREAD_CXX" || PTHREAD_CXX="$CXX" + + + + + + +# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: +if test "x$ax_pthread_ok" = "xyes"; then + : + : +else + ax_pthread_ok=no + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + LIBS="$PTHREAD_LIBS $LIBS" + AM_CFLAGS="$AM_CFLAGS $PTHREAD_CFLAGS" + + + +printf '%s\n' "#define MYTHREAD_POSIX 1" >>confdefs.h + + + # This is nice to have but not mandatory. + OLD_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + ac_fn_c_check_func "$LINENO" "pthread_condattr_setclock" "ac_cv_func_pthread_condattr_setclock" +if test "x$ac_cv_func_pthread_condattr_setclock" = xyes +then : + printf '%s\n' "#define HAVE_PTHREAD_CONDATTR_SETCLOCK 1" >>confdefs.h + +fi + + CFLAGS=$OLD_CFLAGS + ;; #( + win95) : + + +printf '%s\n' "#define MYTHREAD_WIN95 1" >>confdefs.h + + ;; #( + vista) : + + +printf '%s\n' "#define MYTHREAD_VISTA 1" >>confdefs.h + + + ;; #( + *) : + ;; +esac + if test "x$enable_threads" != xno; then + COND_THREADS_TRUE= + COND_THREADS_FALSE='#' +else + COND_THREADS_TRUE='#' + COND_THREADS_FALSE= +fi + + +echo +echo "Initializing Libtool:" + + +case `pwd` in + *\ * | *\ *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +printf '%s\n' "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.5.4' +macro_revision='2.5.4' + + + + + + + + + + + + + + +ltmain=$ac_aux_dir/ltmain.sh + +# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 +printf %s "checking how to print strings... " >&6; } +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "" +} + +case $ECHO in + printf*) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: printf" >&5 +printf '%s\n' "printf" >&6; } ;; + print*) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 +printf '%s\n' "print -r" >&6; } ;; + *) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: cat" >&5 +printf '%s\n' "cat" >&6; } ;; +esac + + + + + + + + + + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +printf %s "checking for a sed that does not truncate output... " >&6; } +if test ${ac_cv_path_SED+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in sed gsed + do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in #( +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +#( +*) + ac_count=0 + printf %s 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + printf '%s\n' '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +printf '%s\n' "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +printf %s "checking for grep that handles long lines and -e... " >&6; } +if test ${ac_cv_path_GREP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in grep ggrep + do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in #( +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +#( +*) + ac_count=0 + printf %s 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + printf '%s\n' 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +printf '%s\n' "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +printf %s "checking for egrep... " >&6; } +if test ${ac_cv_path_EGREP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in egrep + do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in #( +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +#( +*) + ac_count=0 + printf %s 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + printf '%s\n' 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +printf '%s\n' "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + EGREP_TRADITIONAL=$EGREP + ac_cv_path_EGREP_TRADITIONAL=$EGREP + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 +printf %s "checking for fgrep... " >&6; } +if test ${ac_cv_path_FGREP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in fgrep + do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_FGREP" || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in #( +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +#( +*) + ac_count=0 + printf %s 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + printf '%s\n' 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 +printf '%s\n' "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test ${with_gnu_ld+y} +then : + withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes +else case e in #( + e) with_gnu_ld=no ;; +esac +fi + +ac_prog=ld +if test yes = "$GCC"; then + # Check if gcc -print-prog-name=ld gives a path. + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +printf %s "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw* | *-*-windows*) + # gcc leaves a trailing carriage return, which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD=$ac_prog + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test yes = "$with_gnu_ld"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +printf %s "checking for GNU ld... " >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +printf %s "checking for non-GNU ld... " >&6; } +fi +if test ${lt_cv_path_LD+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -z "$LD"; then + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD=$ac_dir/$ac_prog + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +printf '%s\n' "$LD" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi +test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +printf %s "checking if the linker ($LD) is GNU ld... " >&6; } +if test ${lt_cv_prog_gnu_ld+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +printf '%s\n' "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 +printf %s "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if test ${lt_cv_path_NM+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM=$NM +else + lt_nm_to_check=${ac_tool_prefix}nm + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/$lt_tmp_nm + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the 'sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty + case $build_os in + mingw* | windows*) lt_bad_file=conftest.nm/nofile ;; + *) lt_bad_file=/dev/null ;; + esac + case `"$tmp_nm" -B $lt_bad_file 2>&1 | $SED '1q'` in + *$lt_bad_file* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break 2 + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | $SED '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break 2 + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS=$lt_save_ifs + done + : ${lt_cv_path_NM=no} +fi ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 +printf '%s\n' "$lt_cv_path_NM" >&6; } +if test no != "$lt_cv_path_NM"; then + NM=$lt_cv_path_NM +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + if test -n "$ac_tool_prefix"; then + for ac_prog in dumpbin "link -dump" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_DUMPBIN+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 +printf '%s\n' "$DUMPBIN" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in dumpbin "link -dump" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_DUMPBIN+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 +printf '%s\n' "$ac_ct_DUMPBIN" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + case `$DUMPBIN -symbols -headers /dev/null 2>&1 | $SED '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols -headers" + ;; + *) + DUMPBIN=: + ;; + esac + fi + + if test : != "$DUMPBIN"; then + NM=$DUMPBIN + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 +printf %s "checking the name lister ($NM) interface... " >&6; } +if test ${lt_cv_nm_interface+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:$LINENO: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 +printf '%s\n' "$lt_cv_nm_interface" >&6; } + +# find the maximum length of command line arguments +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 +printf %s "checking the maximum length of command line arguments... " >&6; } +if test ${lt_cv_sys_max_cmd_len+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) i=0 + teststring=ABCD + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu* | ironclad*) + # Under GNU Hurd and Ironclad, this test is not required because there + # is no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | windows* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + darwin* | dragonfly* | freebsd* | midnightbsd* | netbsd* | openbsd*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | $SED 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len" && \ + test undefined != "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test X`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test 17 != "$i" # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + ;; +esac +fi + +if test -n "$lt_cv_sys_max_cmd_len"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 +printf '%s\n' "$lt_cv_sys_max_cmd_len" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: none" >&5 +printf '%s\n' "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 +printf %s "checking how to convert $build file names to $host format... " >&6; } +if test ${lt_cv_to_host_file_cmd+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) case $host in + *-*-mingw* ) + case $build in + *-*-mingw* | *-*-windows* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* | *-*-windows* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac + ;; +esac +fi + +to_host_file_cmd=$lt_cv_to_host_file_cmd +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 +printf '%s\n' "$lt_cv_to_host_file_cmd" >&6; } + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 +printf %s "checking how to convert $build file names to toolchain format... " >&6; } +if test ${lt_cv_to_tool_file_cmd+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) #assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* | *-*-windows* ) + case $build in + *-*-mingw* | *-*-windows* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac + ;; +esac +fi + +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 +printf '%s\n' "$lt_cv_to_tool_file_cmd" >&6; } + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 +printf %s "checking for $LD option to reload object files... " >&6; } +if test ${lt_cv_ld_reload_flag+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_ld_reload_flag='-r' ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 +printf '%s\n' "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + cygwin* | mingw* | windows* | pw32* | cegcc*) + if test yes != "$GCC"; then + reload_cmds=false + fi + ;; + darwin*) + if test yes = "$GCC"; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +# Extract the first word of "file", so it can be a program name with args. +set dummy file; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_FILECMD+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$FILECMD"; then + ac_cv_prog_FILECMD="$FILECMD" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_FILECMD="file" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_prog_FILECMD" && ac_cv_prog_FILECMD=":" +fi ;; +esac +fi +FILECMD=$ac_cv_prog_FILECMD +if test -n "$FILECMD"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $FILECMD" >&5 +printf '%s\n' "$FILECMD" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_OBJDUMP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +printf '%s\n' "$OBJDUMP" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_OBJDUMP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +printf '%s\n' "$ac_ct_OBJDUMP" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 +printf %s "checking how to recognize dependent libraries... " >&6; } +if test ${lt_cv_deplibs_check_method+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# 'unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'file_magic [[regex]]' -- check by looking for files in library path +# that responds to the $file_magic_cmd with a given extended regex. +# If you have 'file' or equivalent on your system and you're not sure +# whether 'pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='$FILECMD -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | windows* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64|pe-aarch64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly* | midnightbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=$FILECMD + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=$FILECMD + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +*-mlibc) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=$FILECMD + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +serenity*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +os2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 +printf '%s\n' "$lt_cv_deplibs_check_method" >&6; } + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | windows* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_DLLTOOL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +printf '%s\n' "$DLLTOOL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_DLLTOOL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +printf '%s\n' "$ac_ct_DLLTOOL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 +printf %s "checking how to associate runtime and link libraries... " >&6; } +if test ${lt_cv_sharedlib_from_linklib_cmd+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | windows* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh; + # decide which one to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd=$ECHO + ;; +esac + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 +printf '%s\n' "$lt_cv_sharedlib_from_linklib_cmd" >&6; } +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_RANLIB+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +printf '%s\n' "$RANLIB" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_RANLIB+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +printf '%s\n' "$ac_ct_RANLIB" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +if test -n "$ac_tool_prefix"; then + for ac_prog in ar + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_AR+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="$ac_tool_prefix$ac_prog" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +printf '%s\n' "$AR" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + test -n "$AR" && break + done +fi +if test -z "$AR"; then + ac_ct_AR=$AR + for ac_prog in ar +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_AR+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="$ac_prog" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +printf '%s\n' "$ac_ct_AR" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + test -n "$ac_ct_AR" && break +done + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +fi + +: ${AR=ar} + + + + + + +# Use ARFLAGS variable as AR's operation code to sync the variable naming with +# Automake. If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have +# higher priority because that's what people were doing historically (setting +# ARFLAGS for automake and AR_FLAGS for libtool). FIXME: Make the AR_FLAGS +# variable obsoleted/removed. + +test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr} +lt_ar_flags=$AR_FLAGS + + + + + + +# Make AR_FLAGS overridable by 'make ARFLAGS='. Don't try to run-time override +# by AR_FLAGS because that was never working and AR_FLAGS is about to die. + + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 +printf %s "checking for archiver @FILE support... " >&6; } +if test ${lt_cv_ar_at_file+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_ar_at_file=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -eq "$ac_status"; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 + (eval $lt_ar_try) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if test 0 -ne "$ac_status"; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 +printf '%s\n' "$lt_cv_ar_at_file" >&6; } + +if test no = "$lt_cv_ar_at_file"; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_STRIP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +printf '%s\n' "$STRIP" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_STRIP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +printf '%s\n' "$ac_ct_STRIP" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac + + + + + + + + + + + + + + + + + + + + + +for ac_prog in gawk mawk nawk awk 'busybox awk' +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_AWK+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +printf '%s\n' "$AWK" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + test -n "$AWK" && break +done + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 +printf %s "checking command to parse $NM output from $compiler object... " >&6; } +if test ${lt_cv_sys_global_symbol_pipe+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | windows* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test ia64 = "$host_cpu"; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BCDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Gets list of data symbols to import. + lt_cv_sys_global_symbol_to_import="$SED -n -e 's/^I .* \(.*\)$/\1/p'" + # Adjust the below global symbol transforms to fixup imported variables. + lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" + lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" + lt_c_name_lib_hook="\ + -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ + -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" +else + # Disable hooks by default. + lt_cv_sys_global_symbol_to_import= + lt_cdecl_hook= + lt_c_name_hook= + lt_c_name_lib_hook= +fi + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="$SED -n"\ +$lt_cdecl_hook\ +" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="$SED -n"\ +$lt_c_name_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" + +# Transform an extracted symbol line into symbol name with lib prefix and +# symbol address. +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="$SED -n"\ +$lt_c_name_lib_hook\ +" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ +" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ +" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw* | windows*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function, + # D for any global variable and I for any imported variable. + # Also find C++ and __fastcall symbols from MSVC++ or ICC, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ +" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ +" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ +" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ +" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="$SED -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | $SED '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(void){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + # Now try to grab the symbols. + nlist=conftest.nm + $ECHO "$as_me:$LINENO: $NM conftest.$ac_objext | $lt_cv_sys_global_symbol_pipe > $nlist" >&5 + if eval "$NM" conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist 2>&5 && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE +/* DATA imports from DLLs on WIN32 can't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT_DLSYM_CONST +#elif defined __osf__ +/* This system does not cope well with relocations in const data. */ +# define LT_DLSYM_CONST +#else +# define LT_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS=conftstm.$ac_objext + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s conftest$ac_exeext; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test yes = "$pipe_works"; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + ;; +esac +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: failed" >&5 +printf '%s\n' "failed" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: ok" >&5 +printf '%s\n' "ok" >&6; } +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 +printf %s "checking for sysroot... " >&6; } + +# Check whether --with-sysroot was given. +if test ${with_sysroot+y} +then : + withval=$with_sysroot; +else case e in #( + e) with_sysroot=no ;; +esac +fi + + +lt_sysroot= +case $with_sysroot in #( + yes) + if test yes = "$GCC"; then + # Trim trailing / since we'll always append absolute paths and we want + # to avoid //, if only for less confusing output for the user. + lt_sysroot=`$CC --print-sysroot 2>/dev/null | $SED 's:/\+$::'` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | $SED -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 +printf '%s\n' "$with_sysroot" >&6; } + as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 + ;; +esac + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 +printf '%s\n' "${lt_sysroot:-no}" >&6; } + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 +printf %s "checking for a working dd... " >&6; } +if test ${ac_cv_path_lt_DD+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +: ${lt_DD:=$DD} +if test -z "$lt_DD"; then + ac_path_lt_DD_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in dd + do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_lt_DD="$as_dir$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_lt_DD" || continue +if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: +fi + $ac_path_lt_DD_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_lt_DD"; then + : + fi +else + ac_cv_path_lt_DD=$lt_DD +fi + +rm -f conftest.i conftest2.i conftest.out ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 +printf '%s\n' "$ac_cv_path_lt_DD" >&6; } + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 +printf %s "checking how to truncate binary pipes... " >&6; } +if test ${lt_cv_truncate_bin+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) printf 0123456789abcdef0123456789abcdef >conftest.i +cat conftest.i conftest.i >conftest2.i +lt_cv_truncate_bin= +if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then + cmp -s conftest.i conftest.out \ + && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" +fi +rm -f conftest.i conftest2.i conftest.out +test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 +printf '%s\n' "$lt_cv_truncate_bin" >&6; } + + + + + + + +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +func_cc_basename () +{ + for cc_temp in $*""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac + done + func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +} + +# Check whether --enable-libtool-lock was given. +if test ${enable_libtool_lock+y} +then : + enableval=$enable_libtool_lock; +fi + +test no = "$enable_libtool_lock" || enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out what ABI is being produced by ac_compile, and set mode + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `$FILECMD conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE=32 + ;; + *ELF-64*) + HPUX_IA64_MODE=64 + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + if test yes = "$lt_cv_prog_gnu_ld"; then + case `$FILECMD conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `$FILECMD conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +mips64*-*linux*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo '#line '$LINENO' "configure"' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + emul=elf + case `$FILECMD conftest.$ac_objext` in + *32-bit*) + emul="${emul}32" + ;; + *64-bit*) + emul="${emul}64" + ;; + esac + case `$FILECMD conftest.$ac_objext` in + *MSB*) + emul="${emul}btsmip" + ;; + *LSB*) + emul="${emul}ltsmip" + ;; + esac + case `$FILECMD conftest.$ac_objext` in + *N32*) + emul="${emul}n32" + ;; + esac + LD="${LD-ld} -m $emul" + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*|x86_64-gnu*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. Note that the listed cases only cover the + # situations where additional linker options are needed (such as when + # doing 32-bit compilation for a host where ld defaults to 64-bit, or + # vice versa); the common cases where no linker options are needed do + # not appear in the list. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `$FILECMD conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*|x86_64-gnu*) + case `$FILECMD conftest.o` in + *x86-64*) + LD="${LD-ld} -m elf32_x86_64" + ;; + *) + LD="${LD-ld} -m elf_i386" + ;; + esac + ;; + powerpc64le-*linux*) + LD="${LD-ld} -m elf32lppclinux" + ;; + powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*|x86_64-gnu*) + LD="${LD-ld} -m elf_x86_64" + ;; + powerpcle-*linux*) + LD="${LD-ld} -m elf64lppc" + ;; + powerpc-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -belf" + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 +printf %s "checking whether the C compiler needs -belf... " >&6; } +if test ${lt_cv_cc_needs_belf+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + lt_cv_cc_needs_belf=yes +else case e in #( + e) lt_cv_cc_needs_belf=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 +printf '%s\n' "$lt_cv_cc_needs_belf" >&6; } + if test yes != "$lt_cv_cc_needs_belf"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS=$SAVE_CFLAGS + fi + ;; +*-*solaris*) + # Find out what ABI is being produced by ac_compile, and set linker + # options accordingly. + echo 'int i;' > conftest.$ac_ext + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then + case `$FILECMD conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*|x86_64-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD=${LD-ld}_sol2 + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks=$enable_libtool_lock + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. +set dummy ${ac_tool_prefix}mt; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_MANIFEST_TOOL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$MANIFEST_TOOL"; then + ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL +if test -n "$MANIFEST_TOOL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 +printf '%s\n' "$MANIFEST_TOOL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_MANIFEST_TOOL"; then + ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL + # Extract the first word of "mt", so it can be a program name with args. +set dummy mt; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_MANIFEST_TOOL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_MANIFEST_TOOL"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL +if test -n "$ac_ct_MANIFEST_TOOL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 +printf '%s\n' "$ac_ct_MANIFEST_TOOL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_MANIFEST_TOOL" = x; then + MANIFEST_TOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL + fi +else + MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" +fi + +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 +printf %s "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } +if test ${lt_cv_path_manifest_tool+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_path_manifest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&5 + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_manifest_tool=yes + fi + rm -f conftest* ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_manifest_tool" >&5 +printf '%s\n' "$lt_cv_path_manifest_tool" >&6; } +if test yes != "$lt_cv_path_manifest_tool"; then + MANIFEST_TOOL=: +fi + + + + + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_DSYMUTIL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 +printf '%s\n' "$DSYMUTIL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_DSYMUTIL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 +printf '%s\n' "$ac_ct_DSYMUTIL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_NMEDIT+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 +printf '%s\n' "$NMEDIT" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_NMEDIT+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 +printf '%s\n' "$ac_ct_NMEDIT" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_LIPO+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 +printf '%s\n' "$LIPO" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_LIPO+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_LIPO="lipo" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 +printf '%s\n' "$ac_ct_LIPO" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_OTOOL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 +printf '%s\n' "$OTOOL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_OTOOL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL="otool" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 +printf '%s\n' "$ac_ct_OTOOL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_OTOOL64+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 +printf '%s\n' "$OTOOL64" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_OTOOL64+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 +printf '%s\n' "$ac_ct_OTOOL64" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 +printf %s "checking for -single_module linker flag... " >&6; } +if test ${lt_cv_apple_cc_single_mod+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_apple_cc_single_mod=no + if test -z "$LT_MULTI_MODULE"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test 0 = "$_lt_result"; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 +printf '%s\n' "$lt_cv_apple_cc_single_mod" >&6; } + + # Feature test to disable chained fixups since it is not + # compatible with '-undefined dynamic_lookup' + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for -no_fixup_chains linker flag" >&5 +printf %s "checking for -no_fixup_chains linker flag... " >&6; } +if test ${lt_cv_support_no_fixup_chains+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -Wl,-no_fixup_chains" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + lt_cv_support_no_fixup_chains=yes +else case e in #( + e) lt_cv_support_no_fixup_chains=no + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_support_no_fixup_chains" >&5 +printf '%s\n' "$lt_cv_support_no_fixup_chains" >&6; } + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 +printf %s "checking for -exported_symbols_list linker flag... " >&6; } +if test ${lt_cv_ld_exported_symbols_list+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + lt_cv_ld_exported_symbols_list=yes +else case e in #( + e) lt_cv_ld_exported_symbols_list=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 +printf '%s\n' "$lt_cv_ld_exported_symbols_list" >&6; } + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 +printf %s "checking for -force_load linker flag... " >&6; } +if test ${lt_cv_ld_force_load+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 + echo "$AR $AR_FLAGS libconftest.a conftest.o" >&5 + $AR $AR_FLAGS libconftest.a conftest.o 2>&5 + echo "$RANLIB libconftest.a" >&5 + $RANLIB libconftest.a 2>&5 + cat > conftest.c << _LT_EOF +int main(void) { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&5 + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 +printf '%s\n' "$lt_cv_ld_force_load" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + darwin*) + case $MACOSX_DEPLOYMENT_TARGET,$host in + 10.[012],*|,*powerpc*-darwin[5-8]*) + _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; + *) + _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' + if test yes = "$lt_cv_support_no_fixup_chains"; then + as_fn_append _lt_dar_allow_undefined ' $wl-no_fixup_chains' + fi + ;; + esac + ;; + esac + if test yes = "$lt_cv_apple_cc_single_mod"; then + _lt_dar_single_mod='$single_module' + fi + _lt_dar_needs_single_mod=no + case $host_os in + rhapsody* | darwin1.*) + _lt_dar_needs_single_mod=yes ;; + darwin*) + # When targeting Mac OS X 10.4 (darwin 8) or later, + # -single_module is the default and -multi_module is unsupported. + # The toolchain on macOS 10.14 (darwin 18) and later cannot + # target any OS version that needs -single_module. + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*-darwin[567].*|10.[0-3],*-darwin[5-9].*|10.[0-3],*-darwin1[0-7].*) + _lt_dar_needs_single_mod=yes ;; + esac + ;; + esac + if test yes = "$lt_cv_ld_exported_symbols_list"; then + _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' + fi + if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +# func_munge_path_list VARIABLE PATH +# ----------------------------------- +# VARIABLE is name of variable containing _space_ separated list of +# directories to be munged by the contents of PATH, which is string +# having a format: +# "DIR[:DIR]:" +# string "DIR[ DIR]" will be prepended to VARIABLE +# ":DIR[:DIR]" +# string "DIR[ DIR]" will be appended to VARIABLE +# "DIRP[:DIRP]::[DIRA:]DIRA" +# string "DIRP[ DIRP]" will be prepended to VARIABLE and string +# "DIRA[ DIRA]" will be appended to VARIABLE +# "DIR[:DIR]" +# VARIABLE will be replaced by "DIR[ DIR]" +func_munge_path_list () +{ + case x$2 in + x) + ;; + *:) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\" + ;; + x:*) + eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\" + ;; + *::*) + eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\" + eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\" + ;; + *) + eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\" + ;; + esac +} + +ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default +" +if test "x$ac_cv_header_dlfcn_h" = xyes +then : + printf '%s\n' "#define HAVE_DLFCN_H 1" >>confdefs.h + +fi + + + + + +# Set options +enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-windows* | *-*-pw32* | *-*-cegcc*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. +set dummy ${ac_tool_prefix}as; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_AS+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$AS"; then + ac_cv_prog_AS="$AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_AS="${ac_tool_prefix}as" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +AS=$ac_cv_prog_AS +if test -n "$AS"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 +printf '%s\n' "$AS" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AS"; then + ac_ct_AS=$AS + # Extract the first word of "as", so it can be a program name with args. +set dummy as; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_AS+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_AS"; then + ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AS="as" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_AS=$ac_cv_prog_ac_ct_AS +if test -n "$ac_ct_AS"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 +printf '%s\n' "$ac_ct_AS" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_AS" = x; then + AS="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AS=$ac_ct_AS + fi +else + AS="$ac_cv_prog_AS" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. +set dummy ${ac_tool_prefix}dlltool; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_DLLTOOL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$DLLTOOL"; then + ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +DLLTOOL=$ac_cv_prog_DLLTOOL +if test -n "$DLLTOOL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 +printf '%s\n' "$DLLTOOL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DLLTOOL"; then + ac_ct_DLLTOOL=$DLLTOOL + # Extract the first word of "dlltool", so it can be a program name with args. +set dummy dlltool; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_DLLTOOL+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_DLLTOOL"; then + ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_DLLTOOL="dlltool" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL +if test -n "$ac_ct_DLLTOOL"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 +printf '%s\n' "$ac_ct_DLLTOOL" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_DLLTOOL" = x; then + DLLTOOL="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DLLTOOL=$ac_ct_DLLTOOL + fi +else + DLLTOOL="$ac_cv_prog_DLLTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_OBJDUMP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +printf '%s\n' "$OBJDUMP" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_OBJDUMP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +printf '%s\n' "$ac_ct_OBJDUMP" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + ;; +esac + +test -z "$AS" && AS=as + + + + + +test -z "$DLLTOOL" && DLLTOOL=dlltool + + + + + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + enable_dlopen=no + + + + # Check whether --enable-shared was given. +if test ${enable_shared+y} +then : + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else case e in #( + e) enable_shared=yes ;; +esac +fi + + + + + + + + + + # Check whether --enable-static was given. +if test ${enable_static+y} +then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else case e in #( + e) enable_static=yes ;; +esac +fi + + + + + + + + + + # Check whether --enable-pic was given. +if test ${enable_pic+y} +then : + enableval=$enable_pic; lt_p=${PACKAGE-default} + case $enableval in + yes|no) pic_mode=$enableval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else case e in #( + e) # Check whether --with-pic was given. +if test ${with_pic+y} +then : + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for lt_pkg in $withval; do + IFS=$lt_save_ifs + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else case e in #( + e) pic_mode=default ;; +esac +fi + + ;; +esac +fi + + + + + + + + + # Check whether --enable-fast-install was given. +if test ${enable_fast_install+y} +then : + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, + for pkg in $enableval; do + IFS=$lt_save_ifs + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS=$lt_save_ifs + ;; + esac +else case e in #( + e) enable_fast_install=yes ;; +esac +fi + + + + + + + + + shared_archive_member_spec= +case $host,$enable_shared in +power*-*-aix[5-9]*,yes) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 +printf %s "checking which variant of shared library versioning to provide... " >&6; } + # Check whether --enable-aix-soname was given. +if test ${enable_aix_soname+y} +then : + enableval=$enable_aix_soname; case $enableval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --enable-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$enable_aix_soname +else case e in #( + e) # Check whether --with-aix-soname was given. +if test ${with_aix_soname+y} +then : + withval=$with_aix_soname; case $withval in + aix|svr4|both) + ;; + *) + as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 + ;; + esac + lt_cv_with_aix_soname=$with_aix_soname +else case e in #( + e) if test ${lt_cv_with_aix_soname+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_with_aix_soname=aix ;; +esac +fi + ;; +esac +fi + + enable_aix_soname=$lt_cv_with_aix_soname ;; +esac +fi + + with_aix_soname=$enable_aix_soname + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 +printf '%s\n' "$with_aix_soname" >&6; } + if test aix != "$with_aix_soname"; then + # For the AIX way of multilib, we name the shared archive member + # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', + # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. + # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, + # the AIX toolchain works better with OBJECT_MODE set (default 32). + if test 64 = "${OBJECT_MODE-32}"; then + shared_archive_member_spec=shr_64 + else + shared_archive_member_spec=shr + fi + fi + ;; +*) + with_aix_soname=aix + ;; +esac + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS=$ltmain + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}"; then + setopt NO_GLOB_SUBST +fi + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 +printf %s "checking for objdir... " >&6; } +if test ${lt_cv_objdir+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 +printf '%s\n' "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +printf '%s\n' "#define LT_OBJDIR \"$lt_cv_objdir/\"" >>confdefs.h + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test set != "${COLLECT_NAMES+set}"; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a '.a' archive for static linking (except MSVC and +# ICC, which need '.lib'). +libext=a + +with_gnu_ld=$lt_cv_prog_gnu_ld + +old_CC=$CC +old_CFLAGS=$CFLAGS + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +func_cc_basename $compiler +cc_basename=$func_cc_basename_result + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 +printf %s "checking for ${ac_tool_prefix}file... " >&6; } +if test ${lt_cv_path_MAGIC_CMD+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/${ac_tool_prefix}file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +printf '%s\n' "$MAGIC_CMD" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for file" >&5 +printf %s "checking for file... " >&6; } +if test ${lt_cv_path_MAGIC_CMD+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD=$MAGIC_CMD + lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS=$lt_save_ifs + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/file"; then + lt_cv_path_MAGIC_CMD=$ac_dir/"file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD=$lt_cv_path_MAGIC_CMD + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS=$lt_save_ifs + MAGIC_CMD=$lt_save_MAGIC_CMD + ;; +esac ;; +esac +fi + +MAGIC_CMD=$lt_cv_path_MAGIC_CMD +if test -n "$MAGIC_CMD"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 +printf '%s\n' "$MAGIC_CMD" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC=$CC +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(void){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test yes = "$GCC"; then + case $cc_basename in + nvcc*) + lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; + *) + lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; + esac + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +printf %s "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if test ${lt_cv_prog_compiler_rtti_exceptions+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +printf '%s\n' "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test yes = "$GCC"; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + lt_prog_compiler_pic='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + + mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu* | *freebsd*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + *flang* | ftn | f18* | f95*) + # Flang compiler. + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | $SED 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *-mlibc) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + serenity*) + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +printf %s "checking for $compiler option to produce PIC... " >&6; } +if test ${lt_cv_prog_compiler_pic+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +printf '%s\n' "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +printf %s "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if test ${lt_cv_prog_compiler_pic_works+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +printf '%s\n' "$lt_cv_prog_compiler_pic_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_pic_works"; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +printf %s "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test ${lt_cv_prog_compiler_static_works+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler_static_works=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +printf '%s\n' "$lt_cv_prog_compiler_static_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_static_works"; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +printf %s "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test ${lt_cv_prog_compiler_c_o+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +printf '%s\n' "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 +printf %s "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test ${lt_cv_prog_compiler_c_o+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 +printf '%s\n' "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links=nottested +if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then + # do not overwrite the value of need_locks provided by the user + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 +printf %s "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 +printf '%s\n' "$hard_links" >&6; } + if test no = "$hard_links"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 +printf '%s\n' "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +printf %s "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ' (' and ')$', so one must not match beginning or + # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', + # as well as any symbol that contains 'd'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | windows* | pw32* | cegcc*) + # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++ or Intel C++ Compiler. + if test yes != "$GCC"; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC) + with_gnu_ld=yes + ;; + esac + + ld_shlibs=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test yes = "$with_gnu_ld"; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; + *\ \(GNU\ Binutils\)\ [3-9]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test yes = "$lt_use_gnu_ld_interface"; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='$wl' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='$wl--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test ia64 != "$host_cpu"; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | windows* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + export_dynamic_flag_spec='$wl--export-all-symbols' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' + exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' + file_list_spec='@' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file, use it as + # is; otherwise, prepend EXPORTS... + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + haiku*) + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + link_all_deplibs=no + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + file_list_spec='@' + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test linux-dietlibc = "$host_os"; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test no = "$tmp_diet" + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + nagfor*) # NAGFOR 5.3 + tmp_sharedflag='-Wl,-shared' ;; + xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + ;; + esac + case `$CC -V 2>&1 | $SED 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + tcc*) + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + export_dynamic_flag_spec='-rdynamic' + ;; + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test yes = "$supports_anon_versioning"; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + *-mlibc) + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test no = "$ld_shlibs"; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test ia64 = "$host_cpu"; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag= + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to GNU nm, but means don't demangle to AIX nm. + # Without the "-l" option, or with the "-B" option, AIX nm treats + # weak defined symbols like other global defined symbols, whereas + # GNU nm marks them as "W". + # While the 'weak' keyword is ignored in the Export File, we need + # it in the Import File for the 'aix-soname' feature, so we have + # to replace the "-B" option with "-P" for AIX nm. + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # have runtime linking enabled, and use it for executables. + # For shared libraries, we enable/disable runtime linking + # depending on the kind of the shared library created - + # when "with_aix_soname,aix_use_runtimelinking" is: + # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables + # "aix,yes" lib.so shared, rtl:yes, for executables + # lib.a static archive + # "both,no" lib.so.V(shr.o) shared, rtl:yes + # lib.a(lib.so.V) shared, rtl:no, for executables + # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a(lib.so.V) shared, rtl:no + # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables + # lib.a static archive + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then + aix_use_runtimelinking=yes + break + fi + done + if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then + # With aix-soname=svr4, we create the lib.so.V shared archives only, + # so we don't have lib.a shared libs to link our executables. + # We have to force runtime linking in this case. + aix_use_runtimelinking=yes + LDFLAGS="$LDFLAGS -Wl,-brtl" + fi + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='$wl-f,' + case $with_aix_soname,$aix_use_runtimelinking in + aix,*) ;; # traditional, no import file + svr4,* | *,yes) # use import file + # The Import File defines what to hardcode. + hardcode_direct=no + hardcode_direct_absolute=no + ;; + esac + + if test yes = "$GCC"; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`$CC -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test yes = "$aix_use_runtimelinking"; then + shared_flag="$shared_flag "'$wl-G' + fi + # Need to ensure runtime linking is disabled for the traditional + # shared library, or the linker may eventually find shared libraries + # /with/ Import File - we do not want to mix them. + shared_flag_aix='-shared' + shared_flag_svr4='-shared $wl-G' + else + # not using gcc + if test ia64 = "$host_cpu"; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test yes = "$aix_use_runtimelinking"; then + shared_flag='$wl-G' + else + shared_flag='$wl-bM:SRE' + fi + shared_flag_aix='$wl-bM:SRE' + shared_flag_svr4='$wl-G' + fi + fi + + export_dynamic_flag_spec='$wl-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if test ${lt_cv_aix_libpath_+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + ;; +esac +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag + else + if test ia64 = "$host_cpu"; then + hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + if test set = "${lt_cv_aix_libpath+set}"; then + aix_libpath=$lt_cv_aix_libpath +else + if test ${lt_cv_aix_libpath_+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }' + lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + if test -z "$lt_cv_aix_libpath_"; then + lt_cv_aix_libpath_=/usr/lib:/lib + fi + ;; +esac +fi + + aix_libpath=$lt_cv_aix_libpath_ +fi + + hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' $wl-bernotok' + allow_undefined_flag=' $wl-berok' + if test yes = "$with_gnu_ld"; then + # We only use this code for GNU lds that support --whole-archive. + whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + fi + archive_cmds_need_lc=yes + archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' + # -brtl affects multiple linker settings, -berok does not and is overridden later + compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' + if test svr4 != "$with_aix_soname"; then + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' + fi + if test aix != "$with_aix_soname"; then + archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' + else + # used by -dlpreopen to get the symbols + archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' + fi + archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | windows* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++ or Intel C++ Compiler. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl* | icl*) + # Native MSVC or ICC + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + always_export_symbols=yes + file_list_spec='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -Fe$output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' + archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then + cp "$export_symbols" "$output_objdir/$soname.def"; + echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; + else + $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -Fe$tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, )='true' + enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + old_postinstall_cmds='chmod 644 $oldlib' + postlink_cmds='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile=$lt_outputfile.exe + lt_tool_outputfile=$lt_tool_outputfile.exe + ;; + esac~ + if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC and ICC wrapper + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=.dll + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + enable_shared_with_static_runtimes=yes + ;; + esac + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + if test yes = "$lt_cv_ld_force_load"; then + whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + + else + whole_archive_flag_spec='' + fi + link_all_deplibs=yes + allow_undefined_flag=$_lt_dar_allow_undefined + case $cc_basename in + ifort*|nagfor*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test yes = "$_lt_dar_can_shared"; then + output_verbose_link_cmd=func_echo_all + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" + archive_expsym_cmds="$SED 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" + module_expsym_cmds="$SED -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly* | midnightbsd*) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test yes = "$GCC"; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='$wl-E' + ;; + + hpux10*) + if test yes,no = "$GCC,$with_gnu_ld"; then + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test yes,no = "$GCC,$with_gnu_ld"; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 +printf %s "checking if $CC understands -b... " >&6; } +if test ${lt_cv_prog_compiler__b+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler__b=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -b" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler__b=yes + fi + else + lt_cv_prog_compiler__b=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 +printf '%s\n' "$lt_cv_prog_compiler__b" >&6; } + +if test yes = "$lt_cv_prog_compiler__b"; then + archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' +else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' +fi + + ;; + esac + fi + if test no = "$with_gnu_ld"; then + hardcode_libdir_flag_spec='$wl+b $wl$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='$wl-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test yes = "$GCC"; then + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 +printf %s "checking whether the $host_os linker accepts -exported_symbol... " >&6; } +if test ${lt_cv_irix_exported_symbol+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int foo (void) { return 0; } +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + lt_cv_irix_exported_symbol=yes +else case e in #( + e) lt_cv_irix_exported_symbol=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 +printf '%s\n' "$lt_cv_irix_exported_symbol" >&6; } + if test yes = "$lt_cv_irix_exported_symbol"; then + archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' + fi + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + linux*) + case $cc_basename in + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + ld_shlibs=yes + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + ;; + esac + ;; + + *-mlibc) + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + export_dynamic_flag_spec='$wl-E' + else + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='$wl-rpath,$libdir' + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + shrext_cmds=.dll + archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ + $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ + $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ + $ECHO EXPORTS >> $output_objdir/$libname.def~ + prefix_cmds="$SED"~ + if test EXPORTS = "`$SED 1q $export_symbols`"; then + prefix_cmds="$prefix_cmds -e 1d"; + fi~ + prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ + cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ + $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ + emximp -o $lib $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' + enable_shared_with_static_runtimes=yes + file_list_spec='@' + ;; + + osf3*) + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test yes = "$GCC"; then + allow_undefined_flag=' $wl-expect_unresolved $wl\*' + archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + serenity*) + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test yes = "$GCC"; then + wlarc='$wl' + archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='$wl' + archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands '-z linker_flag'. GCC discards it without '$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test yes = "$GCC"; then + whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test sequent = "$host_vendor"; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='$wl-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We CANNOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='$wl-z,text' + allow_undefined_flag='$wl-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='$wl-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='$wl-Bexport' + runpath_var='LD_RUN_PATH' + + if test yes = "$GCC"; then + archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test sni = "$host_vendor"; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='$wl-Blargedynsym' + ;; + esac + fi + fi + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 +printf '%s\n' "$ld_shlibs" >&6; } +test no = "$ld_shlibs" && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test yes,yes = "$GCC,$enable_shared"; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 +printf %s "checking whether -lc should be explicitly linked in... " >&6; } +if test ${lt_cv_archive_cmds_need_lc+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 +printf '%s\n' "$lt_cv_archive_cmds_need_lc" >&6; } + archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 +printf %s "checking dynamic linker characteristics... " >&6; } + +if test yes = "$GCC"; then + case $host_os in + darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; + *) lt_awk_arg='/^libraries:/' ;; + esac + case $host_os in + mingw* | windows* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; + *) lt_sed_strip_eq='s|=/|/|g' ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary... + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + # ...but if some path component already ends with the multilib dir we assume + # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). + case "$lt_multi_os_dir; $lt_search_path_spec " in + "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) + lt_multi_os_dir= + ;; + esac + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" + elif test -n "$lt_multi_os_dir"; then + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS = " "; FS = "/|\n";} { + lt_foo = ""; + lt_count = 0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo = "/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | windows* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's|/\([A-Za-z]:\)|\1|g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=.so +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + + + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='$libname$release$shared_ext$major' + ;; + +aix[4-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test ia64 = "$host_cpu"; then + # AIX 5 supports IA64 + library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line '#! .'. This would cause the generated library to + # depend on '.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # Using Import Files as archive members, it is possible to support + # filename-based versioning of shared library archives on AIX. While + # this would work for both with and without runtime linking, it will + # prevent static linking of such archives. So we do filename-based + # shared library versioning with .so extension only, which is used + # when both runtime linking and shared linking is enabled. + # Unfortunately, runtime linking may impact performance, so we do + # not want this to be the default eventually. Also, we use the + # versioned .so libs for executables only if there is the -brtl + # linker flag in LDFLAGS as well, or --enable-aix-soname=svr4 only. + # To allow for filename-based versioning support, we need to create + # libNAME.so.V as an archive file, containing: + # *) an Import File, referring to the versioned filename of the + # archive as well as the shared archive member, telling the + # bitwidth (32 or 64) of that shared object, and providing the + # list of exported symbols of that shared object, eventually + # decorated with the 'weak' keyword + # *) the shared object with the F_LOADONLY flag set, to really avoid + # it being seen by the linker. + # At run time we better use the real file rather than another symlink, + # but for link time we create the symlink libNAME.so -> libNAME.so.V + + case $with_aix_soname,$aix_use_runtimelinking in + # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + aix,yes) # traditional libtool + dynamic_linker='AIX unversionable lib.so' + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + aix,no) # traditional AIX only + dynamic_linker='AIX lib.a(lib.so.V)' + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + ;; + svr4,*) # full svr4 only + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,yes) # both, prefer svr4 + dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" + library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' + # unpreferred sharedlib libNAME.a needs extra handling + postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' + postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' + # We do not specify a path in Import Files, so LIBPATH fires. + shlibpath_overrides_runpath=yes + ;; + *,no) # both, prefer aix + dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" + library_names_spec='$libname$release.a $libname.a' + soname_spec='$libname$release$shared_ext$major' + # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling + postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' + postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' + ;; + esac + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='$libname$shared_ext' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | windows* | pw32* | cegcc*) + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + # If user builds GCC with multilib enabled, + # it should just install on $(libdir) + # not on $(libdir)/../bin or 32 bits dlls would override 64 bit ones. + if test xyes = x"$multilib"; then + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + $install_prog $dir/$dlname $destdir/$dlname~ + chmod a+x $destdir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib $destdir/$dlname'\'' || exit \$?; + fi' + else + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + fi + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo $libname | $SED -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" + ;; + mingw* | windows* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo $libname | $SED -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl* | *,icl*) + # Native MSVC or ICC + libname_spec='$name' + soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' + library_names_spec='$libname.dll.lib' + + case $build_os in + mingw* | windows*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec=$LIB + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC and ICC wrapper + library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' + soname_spec='$libname$release$major$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly* | midnightbsd*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[23].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + need_version=yes + ;; + esac + case $host_cpu in + powerpc64) + # On FreeBSD bi-arch platforms, a different variable is used for 32-bit + # binaries. See . + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int test_pointer_size[sizeof (void *) - 5]; + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + shlibpath_var=LD_LIBRARY_PATH +else case e in #( + e) shlibpath_var=LD_32_LIBRARY_PATH ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + ;; + *) + shlibpath_var=LD_LIBRARY_PATH + ;; + esac + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/boot/system/non-packaged/develop/lib /boot/system/develop/lib' + sys_lib_dlsearch_path_spec='/boot/home/config/non-packaged/lib /boot/home/config/lib /boot/system/non-packaged/lib /boot/system/lib' + hardcode_into_libs=no + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + if test 32 = "$HPUX_IA64_MODE"; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + sys_lib_dlsearch_path_spec=/usr/lib/hpux32 + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + sys_lib_dlsearch_path_spec=/usr/lib/hpux64 + fi + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[3-9]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test yes = "$lt_cv_prog_gnu_ld"; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" + sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +linux*android*) + version_type=none # Android doesn't support versioned libraries. + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + dynamic_linker='Android linker' + # -rpath works at least for libraries that are not overridden by + # libraries installed in system locations. + hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + if test ${lt_cv_shlibpath_overrides_runpath+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null +then : + lt_cv_shlibpath_overrides_runpath=yes +fi +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ;; +esac +fi + + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Ideally, we could use ldconfig to report *all* directories which are + # searched for libraries, however this is still not possible. Aside from not + # being certain /sbin/ldconfig is available, command + # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64, + # even though it is searched at run-time. Try to do the best guess by + # appending ld.so.conf contents (and includes) to the search path. + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +*-mlibc) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + dynamic_linker='mlibc ld.so' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec=/usr/lib + need_lib_prefix=no + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then + need_version=no + else + need_version=yes + fi + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +os2*) + libname_spec='$name' + version_type=windows + shrext_cmds=.dll + need_version=no + need_lib_prefix=no + # OS/2 can only load a DLL with a base name of 8 characters or less. + soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; + v=$($ECHO $release$versuffix | tr -d .-); + n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); + $ECHO $n$v`$shared_ext' + library_names_spec='${libname}_dll.$libext' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=BEGINLIBPATH + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + postinstall_cmds='base_file=`basename \$file`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='$libname$release$shared_ext$major' + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + +rdos*) + dynamic_linker=no + ;; + +serenity*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + dynamic_linker='SerenityOS LibELF' + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test yes = "$with_gnu_ld"; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec; then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' + soname_spec='$libname$shared_ext.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=sco + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test yes = "$with_gnu_ld"; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' + soname_spec='$libname$release$shared_ext$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +emscripten*) + version_type=none + need_lib_prefix=no + need_version=no + library_names_spec='$libname$release$shared_ext' + soname_spec='$libname$release$shared_ext' + finish_cmds= + dynamic_linker="Emscripten linker" + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + + + if test yes = "$GCC"; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + lt_prog_compiler_pic='-fPIC' + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the '-m68020' flag to GCC prevents building anything better, + # like '-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + lt_prog_compiler_static= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + lt_prog_compiler_wl='-Xlinker ' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test ia64 = "$host_cpu"; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + case $cc_basename in + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + + mingw* | windows* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + case $host_os in + os2*) + lt_prog_compiler_static='$wl-static' + ;; + esac + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='$wl-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu* | *freebsd*) + case $cc_basename in + # old Intel for x86_64, which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + *flang* | ftn | f18* | f95*) + # Flang compiler. + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + nagfor*) + # NAG Fortran compiler + lt_prog_compiler_wl='-Wl,-Wl,,' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + tcc*) + # Fabrice Bellard et al's Tiny C Compiler + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | $SED 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *-mlibc) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + serenity*) + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms that do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 +printf %s "checking for $compiler option to produce PIC... " >&6; } +if test ${lt_cv_prog_compiler_pic+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler_pic=$lt_prog_compiler_pic ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 +printf '%s\n' "$lt_cv_prog_compiler_pic" >&6; } +lt_prog_compiler_pic=$lt_cv_prog_compiler_pic + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +printf %s "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if test ${lt_cv_prog_compiler_pic_works+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 +printf '%s\n' "$lt_cv_prog_compiler_pic_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_pic_works"; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +printf %s "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test ${lt_cv_prog_compiler_static_works+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) lt_cv_prog_compiler_static_works=no + save_LDFLAGS=$LDFLAGS + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS=$save_LDFLAGS + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 +printf '%s\n' "$lt_cv_prog_compiler_static_works" >&6; } + +if test yes = "$lt_cv_prog_compiler_static_works"; then + : +else + lt_prog_compiler_static= +fi + + + +='-fPIC' + archive_cmds='$CC -sSIDE_MODULE=2 -shared $libobjs $deplibs $compiler_flags -o $lib' + archive_expsym_cmds='$SED "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -sSIDE_MODULE=2 -shared $libobjs $deplibs $compiler_flags -o $lib -s EXPORTED_FUNCTIONS=@$output_objdir/$soname.expsym' + archive_cmds_need_lc=no + no_undefined_flag= + ;; + +*) + dynamic_linker=no + ;; +esac +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 +printf '%s\n' "$dynamic_linker" >&6; } +test no = "$dynamic_linker" && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test yes = "$GCC"; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then + sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec +fi + +if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then + sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec +fi + +# remember unaugmented sys_lib_dlsearch_path content for libtool script decls... +configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec + +# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code +func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH" + +# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool +configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 +printf %s "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test yes = "$hardcode_automatic"; then + + # We can hardcode non-existent directories. + if test no != "$hardcode_direct" && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && + test no != "$hardcode_minus_L"; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 +printf '%s\n' "$hardcode_action" >&6; } + +if test relink = "$hardcode_action" || + test yes = "$inherit_rpath"; then + # Fast installation is not supported + enable_fast_install=no +elif test yes = "$shlibpath_overrides_runpath" || + test no = "$enable_shared"; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test yes != "$enable_dlopen"; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen=load_add_on + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | windows* | pw32* | cegcc*) + lt_cv_dlopen=LoadLibrary + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +printf %s "checking for dlopen in -ldl... " >&6; } +if test ${ac_cv_lib_dl_dlopen+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. + The 'extern "C"' is for builds by C++ compilers; + although this is not generally supported in C code supporting it here + has little cost and some practical benefit (sr 110532). */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (void); +int +main (void) +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ac_cv_lib_dl_dlopen=yes +else case e in #( + e) ac_cv_lib_dl_dlopen=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +printf '%s\n' "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes +then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else case e in #( + e) + lt_cv_dlopen=dyld + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; +esac +fi + + ;; + + tpf*) + # Don't try to run any link tests for TPF. We know it's impossible + # because TPF is a cross-compiler, and we know how we open DSOs. + lt_cv_dlopen=dlopen + lt_cv_dlopen_libs= + lt_cv_dlopen_self=no + ;; + + *) + ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" +if test "x$ac_cv_func_shl_load" = xyes +then : + lt_cv_dlopen=shl_load +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 +printf %s "checking for shl_load in -ldld... " >&6; } +if test ${ac_cv_lib_dld_shl_load+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. + The 'extern "C"' is for builds by C++ compilers; + although this is not generally supported in C code supporting it here + has little cost and some practical benefit (sr 110532). */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (void); +int +main (void) +{ +return shl_load (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ac_cv_lib_dld_shl_load=yes +else case e in #( + e) ac_cv_lib_dld_shl_load=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 +printf '%s\n' "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = xyes +then : + lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld +else case e in #( + e) ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" +if test "x$ac_cv_func_dlopen" = xyes +then : + lt_cv_dlopen=dlopen +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 +printf %s "checking for dlopen in -ldl... " >&6; } +if test ${ac_cv_lib_dl_dlopen+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. + The 'extern "C"' is for builds by C++ compilers; + although this is not generally supported in C code supporting it here + has little cost and some practical benefit (sr 110532). */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (void); +int +main (void) +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ac_cv_lib_dl_dlopen=yes +else case e in #( + e) ac_cv_lib_dl_dlopen=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 +printf '%s\n' "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = xyes +then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 +printf %s "checking for dlopen in -lsvld... " >&6; } +if test ${ac_cv_lib_svld_dlopen+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. + The 'extern "C"' is for builds by C++ compilers; + although this is not generally supported in C code supporting it here + has little cost and some practical benefit (sr 110532). */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (void); +int +main (void) +{ +return dlopen (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ac_cv_lib_svld_dlopen=yes +else case e in #( + e) ac_cv_lib_svld_dlopen=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 +printf '%s\n' "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = xyes +then : + lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 +printf %s "checking for dld_link in -ldld... " >&6; } +if test ${ac_cv_lib_dld_dld_link+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. + The 'extern "C"' is for builds by C++ compilers; + although this is not generally supported in C code supporting it here + has little cost and some practical benefit (sr 110532). */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (void); +int +main (void) +{ +return dld_link (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ac_cv_lib_dld_dld_link=yes +else case e in #( + e) ac_cv_lib_dld_dld_link=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 +printf '%s\n' "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = xyes +then : + lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld +fi + + ;; +esac +fi + + ;; +esac +fi + + ;; +esac +fi + + ;; +esac +fi + + ;; +esac +fi + + ;; + esac + + if test no = "$lt_cv_dlopen"; then + enable_dlopen=no + else + enable_dlopen=yes + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS=$CPPFLAGS + test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS=$LDFLAGS + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS=$LIBS + LIBS="$lt_cv_dlopen_libs $LIBS" + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 +printf %s "checking whether a program can dlopen itself... " >&6; } +if test ${lt_cv_dlopen_self+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord (void) __attribute__((visibility("default"))); +#endif + +int fnord (void) { return 42; } +int main (void) +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 +printf '%s\n' "$lt_cv_dlopen_self" >&6; } + + if test yes = "$lt_cv_dlopen_self"; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 +printf %s "checking whether a statically linked program can dlopen itself... " >&6; } +if test ${lt_cv_dlopen_self_static+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test yes = "$cross_compiling"; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisibility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord (void) __attribute__((visibility("default"))); +#endif + +int fnord (void) { return 42; } +int main (void) +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 + (eval $ac_link) 2>&5 + ac_status=$? + printf '%s\n' "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 +printf '%s\n' "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS=$save_CPPFLAGS + LDFLAGS=$save_LDFLAGS + LIBS=$save_LIBS + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 +printf %s "checking whether stripping libraries is possible... " >&6; } +if test -z "$STRIP"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +else + if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + old_striplib="$STRIP --strip-debug" + striplib="$STRIP --strip-unneeded" + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + else + case $host_os in + darwin*) + # FIXME - insert some real tests, host_os isn't really good enough + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + ;; + freebsd*) + if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then + old_striplib="$STRIP --strip-debug" + striplib="$STRIP --strip-unneeded" + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + fi + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + ;; + esac + fi +fi + + + + + + + + + + + + + # Report what library types will actually be built + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 +printf %s "checking if libtool supports shared libraries... " >&6; } + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 +printf '%s\n' "$can_build_shared" >&6; } + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 +printf %s "checking whether to build shared libraries... " >&6; } + test no = "$can_build_shared" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test yes = "$enable_shared" && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test ia64 != "$host_cpu"; then + case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in + yes,aix,yes) ;; # shared object as lib.so file only + yes,svr4,*) ;; # shared object as lib.so archive member only + yes,*) enable_static=no ;; # shared object in lib.a archive as well + esac + fi + ;; + esac + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 +printf '%s\n' "$enable_shared" >&6; } + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 +printf %s "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test yes = "$enable_shared" || enable_static=yes + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 +printf '%s\n' "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC + + + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args. +set dummy ${ac_tool_prefix}windres; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_RC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$RC"; then + ac_cv_prog_RC="$RC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_RC="${ac_tool_prefix}windres" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +RC=$ac_cv_prog_RC +if test -n "$RC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $RC" >&5 +printf '%s\n' "$RC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RC"; then + ac_ct_RC=$RC + # Extract the first word of "windres", so it can be a program name with args. +set dummy windres; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_RC+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_RC"; then + ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RC="windres" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_RC=$ac_cv_prog_ac_ct_RC +if test -n "$ac_ct_RC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RC" >&5 +printf '%s\n' "$ac_ct_RC" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_RC" = x; then + RC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RC=$ac_ct_RC + fi +else + RC="$ac_cv_prog_RC" +fi + + + + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +objext_RC=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code=$lt_simple_compile_test_code + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +compiler_RC=$CC +func_cc_basename $compiler +cc_basename=$func_cc_basename_result + +lt_cv_prog_compiler_c_o_RC=yes + +if test -n "$compiler"; then + : + + + +fi + +GCC=$lt_save_GCC +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS + + +# This is a bit wrong since it is possible to request that only some libs +# are built as shared. Using that feature isn't so common though, and this +# breaks only on Windows (at least for now) if the user enables only some +# libs as shared. + if test "x$enable_shared" != xno; then + COND_SHARED_TRUE= + COND_SHARED_FALSE='#' +else + COND_SHARED_TRUE='#' + COND_SHARED_FALSE= +fi + + +##################### +# Symbol versioning # +##################### + +# NOTE: This checks if we are building shared or static library +# and if --with-pic or --without-pic was used. Thus this check +# must be after Libtool initialization. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if library symbol versioning should be used" >&5 +printf %s "checking if library symbol versioning should be used... " >&6; } +# Check whether --enable-symbol-versions was given. +if test ${enable_symbol_versions+y} +then : + enableval=$enable_symbol_versions; +else case e in #( + e) enable_symbol_versions=auto ;; +esac +fi + +if test "x$enable_symbol_versions" = xauto; then + case $host_os in + # NOTE: Even if one omits -gnu on GNU/Linux (e.g. + # i486-slackware-linux), configure will (via config.sub) + # append -gnu (e.g. i486-slackware-linux-gnu), and this + # test will work correctly. + gnu* | *-gnu* | freebsd*) + enable_symbol_versions=yes + ;; + *) + enable_symbol_versions=no + ;; + esac +fi + +# There are two variants for symbol versioning. +# See src/liblzma/validate_map.sh for details. +# +# On GNU/Linux, extra symbols are added in the C code. These extra symbols +# must not be put into a static library as they can cause problems (and +# even if they didn't cause problems, they would be useless). On other +# systems symbol versioning may be used too but there is no problem as only +# a linker script is specified in src/liblzma/Makefile.am and that isn't +# used when creating a static library. +# +# Libtool always uses -DPIC when building shared libraries by default and +# doesn't use it for static libs by default. This can be overridden with +# --with-pic and --without-pic though. As long as neither --with-pic nor +# --without-pic is used then we can use #ifdef PIC to detect if the file is +# being built for a shared library. +if test "x$enable_symbol_versions" = xno +then : + + enable_symbol_versions=no + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + +elif test "x$enable_shared" = xno +then : + + enable_symbol_versions=no + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no (not building a shared library)" >&5 +printf '%s\n' "no (not building a shared library)" >&6; } + +else case e in #( + e) + # "yes" means that symbol version are to be used but we need to + # autodetect which variant to use. + if test "x$enable_symbol_versions" = xyes ; then + case "$host_cpu-$host_os" in + microblaze*) + # GCC 12 on MicroBlaze doesn't support + # __symver__ attribute. It's simplest and + # safest to use the generic version on that + # platform since then only the linker script + # is needed. The RHEL/CentOS 7 compatibility + # symbols don't matter on MicroBlaze. + enable_symbol_versions=generic + ;; + *-linux*) + # NVIDIA HPC Compiler doesn't support symbol + # versioning but the linker script can still + # be used. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __NVCOMPILER + use_generic_symbol_versioning + #endif +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP_TRADITIONAL "use_generic_symbol_versioning" >/dev/null 2>&1 +then : + enable_symbol_versions=generic +else case e in #( + e) enable_symbol_versions=linux ;; +esac +fi +rm -rf conftest* + + ;; + *) + enable_symbol_versions=generic + ;; + esac + fi + + if test "x$enable_symbol_versions" = xlinux ; then + case "$pic_mode-$enable_static" in + default-*) + # Use symvers if PIC is defined. + have_symbol_versions_linux=2 + ;; + *-no) + # Not building static library. + # Use symvers unconditionally. + have_symbol_versions_linux=1 + ;; + *) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? " + On GNU/Linux, building both shared and static library at the same time + is not supported if --with-pic or --without-pic is used. + Use either --disable-shared or --disable-static to build one type + of library at a time. If both types are needed, build one at a time, + possibly picking only src/liblzma/.libs/liblzma.a from the static build." "$LINENO" 5 + ;; + esac + +printf '%s\n' "#define HAVE_SYMBOL_VERSIONS_LINUX $have_symbol_versions_linux" >>confdefs.h + + elif test "x$enable_symbol_versions" != xgeneric ; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: " >&5 +printf '%s\n' "" >&6; } + as_fn_error $? "unknown symbol versioning variant '$enable_symbol_versions'" "$LINENO" 5 + fi + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes ($enable_symbol_versions)" >&5 +printf '%s\n' "yes ($enable_symbol_versions)" >&6; } + ;; +esac +fi + + if test "x$enable_symbol_versions" = xlinux; then + COND_SYMVERS_LINUX_TRUE= + COND_SYMVERS_LINUX_FALSE='#' +else + COND_SYMVERS_LINUX_TRUE='#' + COND_SYMVERS_LINUX_FALSE= +fi + + if test "x$enable_symbol_versions" = xgeneric; then + COND_SYMVERS_GENERIC_TRUE= + COND_SYMVERS_GENERIC_FALSE='#' +else + COND_SYMVERS_GENERIC_TRUE='#' + COND_SYMVERS_GENERIC_FALSE= +fi + + + +############################################################################### +# Checks for libraries. +############################################################################### + +echo +echo "Initializing gettext:" + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +printf %s "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`printf '%s\n' "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval test \${ac_cv_prog_make_${ac_make}_set+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @printf '%s\n' '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make ;; +esac +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + SET_MAKE= +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + + + # Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +printf %s "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test ${ac_cv_path_install+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + # Account for fact that we put trailing slashes in our PATH walk. +case $as_dir in #(( + ./ | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF/1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF/1 since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir/" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + ;; +esac +fi + if test ${ac_cv_path_install+y}; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +printf '%s\n' "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for a race-free mkdir -p" >&5 +printf %s "checking for a race-free mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if test ${ac_cv_path_mkdir+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir$ac_prog$ac_exec_ext" || continue + case `"$as_dir$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir ('*'coreutils) '* | \ + *'BusyBox '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + ;; +esac +fi + + test -d ./--version && rmdir ./--version + if test ${ac_cv_path_mkdir+y}; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use plain mkdir -p, + # in the hope it doesn't have the bugs of ancient mkdir. + MKDIR_P='mkdir -p' + fi +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +printf '%s\n' "$MKDIR_P" >&6; } + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5 +printf %s "checking whether NLS is requested... " >&6; } + # Check whether --enable-nls was given. +if test ${enable_nls+y} +then : + enableval=$enable_nls; USE_NLS=$enableval +else case e in #( + e) USE_NLS=yes ;; +esac +fi + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 +printf '%s\n' "$USE_NLS" >&6; } + + + + + GETTEXT_MACRO_VERSION=0.24 + + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_path_MSGFMT+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) case "$MSGFMT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + gt_saved_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$gt_saved_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me:${as_lineno-$LINENO}: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$gt_saved_IFS" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" + ;; +esac ;; +esac +fi +MSGFMT="$ac_cv_path_MSGFMT" +if test "$MSGFMT" != ":"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5 +printf '%s\n' "$MSGFMT" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_path_GMSGFMT+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_path_GMSGFMT="$as_dir$ac_word$ac_exec_ext" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac ;; +esac +fi +GMSGFMT=$ac_cv_path_GMSGFMT +if test -n "$GMSGFMT"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5 +printf '%s\n' "$GMSGFMT" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + + case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;; + *) GMSGFMT_015=$GMSGFMT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_path_XGETTEXT+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) case "$XGETTEXT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + gt_saved_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$gt_saved_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me:${as_lineno-$LINENO}: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$gt_saved_IFS" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac ;; +esac +fi +XGETTEXT="$ac_cv_path_XGETTEXT" +if test "$XGETTEXT" != ":"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5 +printf '%s\n' "$XGETTEXT" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + rm -f messages.po + + case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in + '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;; + *) XGETTEXT_015=$XGETTEXT ;; + esac + + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_path_MSGMERGE+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) case "$MSGMERGE" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. + ;; + *) + gt_saved_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$gt_saved_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + echo "$as_me:${as_lineno-$LINENO}: trying $ac_dir/$ac_word..." >&5 + if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then + ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$gt_saved_IFS" + test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" + ;; +esac ;; +esac +fi +MSGMERGE="$ac_cv_path_MSGMERGE" +if test "$MSGMERGE" != ":"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5 +printf '%s\n' "$MSGMERGE" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + + if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then + MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt' + else + if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then + MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet' + else + MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet' + fi + fi + + + test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS= + + + if test -n "$ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + + DESIRED_LINGUAS="${LINGUAS-\$(ALL_LINGUAS)}" + + + ac_config_commands="$ac_config_commands po-directories" + + + + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_saved_prefix" + + + +# Check whether --with-gnu-ld was given. +if test ${with_gnu_ld+y} +then : + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else case e in #( + e) with_gnu_ld=no ;; +esac +fi + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which + # contains only /bin. Note that ksh looks also at the FPATH variable, + # so we have to set that as well for the test. + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \ + || PATH_SEPARATOR=';' + } +fi + +if test -n "$LD"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ld" >&5 +printf %s "checking for ld... " >&6; } +elif test "$GCC" = yes; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 +printf %s "checking for ld used by $CC... " >&6; } +elif test "$with_gnu_ld" = yes; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 +printf %s "checking for GNU ld... " >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 +printf %s "checking for non-GNU ld... " >&6; } +fi +if test -n "$LD"; then + # Let the user override the test with a path. + : +else + if test ${acl_cv_path_LD+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) + acl_cv_path_LD= # Final result of this test + ac_prog=ld # Program to search in $PATH + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + case $host in + *-*-mingw* | windows*) + # gcc leaves a trailing carriage return which upsets mingw + acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + acl_output=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $acl_output in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'` + while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do + acl_output=`echo $acl_output | sed "s%$re_direlt%/%"` + done + # Got the pathname. No search in PATH is needed. + acl_cv_path_LD="$acl_output" + ac_prog= + ;; + "") + # If it fails, then pretend we aren't using GCC. + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac + fi + if test -n "$ac_prog"; then + # Search for $ac_prog in $PATH. + acl_saved_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$acl_saved_IFS" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$acl_cv_path_LD" -v 2>&1 conftest.$ac_ext +/* end confdefs.h. */ +#if defined __powerpc64__ || defined __LP64__ + int ok; + #else + error fail + #endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + # The compiler produces 64-bit code. Add option '-b64' so that the + # linker groks 64-bit object files. + case "$acl_cv_path_LD " in + *" -b64 "*) ;; + *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;; + esac + +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + ;; + sparc64-*-netbsd*) + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#if defined __sparcv9 || defined __arch64__ + int ok; + #else + error fail + #endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + +else case e in #( + e) # The compiler produces 32-bit code. Add option '-m elf32_sparc' + # so that the linker groks 32-bit object files. + case "$acl_cv_path_LD " in + *" -m elf32_sparc "*) ;; + *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;; + esac + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + ;; + esac + ;; +esac +fi + + LD="$acl_cv_path_LD" +fi +if test -n "$LD"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 +printf '%s\n' "$LD" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 +printf %s "checking if the linker ($LD) is GNU ld... " >&6; } +if test ${acl_cv_prog_gnu_ld+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +printf '%s\n' "$acl_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$acl_cv_prog_gnu_ld + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5 +printf %s "checking for shared library run path origin... " >&6; } +if test ${acl_cv_rpath+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5 +printf '%s\n' "$acl_cv_rpath" >&6; } + wl="$acl_cv_wl" + acl_libext="$acl_cv_libext" + acl_shlibext="$acl_cv_shlibext" + acl_libname_spec="$acl_cv_libname_spec" + acl_library_names_spec="$acl_cv_library_names_spec" + acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + acl_hardcode_direct="$acl_cv_hardcode_direct" + acl_hardcode_minus_L="$acl_cv_hardcode_minus_L" + # Check whether --enable-rpath was given. +if test ${enable_rpath+y} +then : + enableval=$enable_rpath; : +else case e in #( + e) enable_rpath=yes ;; +esac +fi + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking 32-bit host C ABI" >&5 +printf %s "checking 32-bit host C ABI... " >&6; } +if test ${gl_cv_host_cpu_c_abi_32bit+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) case "$host_cpu" in + + # CPUs that only support a 32-bit ABI. + arc \ + | bfin \ + | cris* \ + | csky \ + | epiphany \ + | ft32 \ + | h8300 \ + | m68k \ + | microblaze | microblazeel \ + | nds32 | nds32le | nds32be \ + | nios2 | nios2eb | nios2el \ + | or1k* \ + | or32 \ + | sh | sh1234 | sh1234elb \ + | tic6x \ + | xtensa* ) + gl_cv_host_cpu_c_abi_32bit=yes + ;; + + # CPUs that only support a 64-bit ABI. + alpha | alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] \ + | mmix ) + gl_cv_host_cpu_c_abi_32bit=no + ;; + + *) + if test -n "$gl_cv_host_cpu_c_abi"; then + case "$gl_cv_host_cpu_c_abi" in + i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | loongarch32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc) + gl_cv_host_cpu_c_abi_32bit=yes ;; + x86_64 | alpha | arm64 | aarch64c | hppa64 | ia64 | loongarch64 | mips64 | powerpc64 | powerpc64-elfv2 | riscv*-lp64* | s390x | sparc64 ) + gl_cv_host_cpu_c_abi_32bit=no ;; + *) + gl_cv_host_cpu_c_abi_32bit=unknown ;; + esac + else + gl_cv_host_cpu_c_abi_32bit=unknown + fi + if test $gl_cv_host_cpu_c_abi_32bit = unknown; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int test_pointer_size[sizeof (void *) - 5]; + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + gl_cv_host_cpu_c_abi_32bit=no +else case e in #( + e) gl_cv_host_cpu_c_abi_32bit=yes ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + ;; + esac + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gl_cv_host_cpu_c_abi_32bit" >&5 +printf '%s\n' "$gl_cv_host_cpu_c_abi_32bit" >&6; } + + HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit" + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for ELF binary format" >&5 +printf %s "checking for ELF binary format... " >&6; } +if test ${gl_cv_elf+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#if defined __ELF__ || (defined __linux__ && (defined __EDG__ || defined __SUNPRO_C)) + Extensible Linking Format + #endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP_TRADITIONAL "Extensible Linking Format" >/dev/null 2>&1 +then : + gl_cv_elf=yes +else case e in #( + e) gl_cv_elf=no ;; +esac +fi +rm -rf conftest* + + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gl_cv_elf" >&5 +printf '%s\n' "$gl_cv_elf" >&6; } + if test $gl_cv_elf = yes; then + # Extract the ELF class of a file (5th byte) in decimal. + # Cf. https://en.wikipedia.org/wiki/Executable_and_Linkable_Format#File_header + if od -A x < /dev/null >/dev/null 2>/dev/null; then + # Use POSIX od. + func_elfclass () + { + od -A n -t d1 -j 4 -N 1 + } + else + # Use BSD hexdump. + func_elfclass () + { + dd bs=1 count=1 skip=4 2>/dev/null | hexdump -e '1/1 "%3d "' + echo + } + fi + # Use 'expr', not 'test', to compare the values of func_elfclass, because on + # Solaris 11 OpenIndiana and Solaris 11 OmniOS, the result is 001 or 002, + # not 1 or 2. + case $HOST_CPU_C_ABI_32BIT in + yes) + # 32-bit ABI. + acl_is_expected_elfclass () + { + expr "`func_elfclass | sed -e 's/[ ]//g'`" = 1 > /dev/null + } + ;; + no) + # 64-bit ABI. + acl_is_expected_elfclass () + { + expr "`func_elfclass | sed -e 's/[ ]//g'`" = 2 > /dev/null + } + ;; + *) + # Unknown. + acl_is_expected_elfclass () + { + : + } + ;; + esac + else + acl_is_expected_elfclass () + { + : + } + fi + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for the common suffixes of directories in the library search path" >&5 +printf %s "checking for the common suffixes of directories in the library search path... " >&6; } +if test ${acl_cv_libdirstems+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) acl_libdirstem=lib + acl_libdirstem2= + acl_libdirstem3= + case "$host_os" in + solaris*) + if test $HOST_CPU_C_ABI_32BIT = no; then + acl_libdirstem2=lib/64 + case "$host_cpu" in + sparc*) acl_libdirstem3=lib/sparcv9 ;; + i*86 | x86_64) acl_libdirstem3=lib/amd64 ;; + esac + fi + ;; + netbsd*) + if test $HOST_CPU_C_ABI_32BIT != no; then + case "$host_cpu" in + sparc*) acl_libdirstem2=lib/sparc ;; + esac + fi + ;; + *) + searchpath=`(LC_ALL=C $CC $CPPFLAGS $CFLAGS -print-search-dirs) 2>/dev/null \ + | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'` + if test $HOST_CPU_C_ABI_32BIT != no; then + # 32-bit or unknown ABI. + if test -d /usr/lib32; then + acl_libdirstem2=lib32 + fi + fi + if test $HOST_CPU_C_ABI_32BIT != yes; then + # 64-bit or unknown ABI. + if test -d /usr/lib64; then + acl_libdirstem3=lib64 + fi + fi + if test -n "$searchpath"; then + acl_saved_IFS="${IFS= }"; IFS=":" + for searchdir in $searchpath; do + if test -d "$searchdir"; then + case "$searchdir" in + */lib32/ | */lib32 ) acl_libdirstem2=lib32 ;; + */lib64/ | */lib64 ) acl_libdirstem3=lib64 ;; + */../ | */.. ) + # Better ignore directories of this form. They are misleading. + ;; + *) searchdir=`cd "$searchdir" && pwd` + case "$searchdir" in + */lib32 ) acl_libdirstem2=lib32 ;; + */lib64 ) acl_libdirstem3=lib64 ;; + esac ;; + esac + fi + done + IFS="$acl_saved_IFS" + if test $HOST_CPU_C_ABI_32BIT = yes; then + # 32-bit ABI. + acl_libdirstem3= + fi + if test $HOST_CPU_C_ABI_32BIT = no; then + # 64-bit ABI. + acl_libdirstem2= + fi + fi + ;; + esac + test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem" + test -n "$acl_libdirstem3" || acl_libdirstem3="$acl_libdirstem" + acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2,$acl_libdirstem3" + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $acl_cv_libdirstems" >&5 +printf '%s\n' "$acl_cv_libdirstems" >&6; } + acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'` + acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e 's/^[^,]*,//' -e 's/,.*//'` + acl_libdirstem3=`echo "$acl_cv_libdirstems" | sed -e 's/^[^,]*,[^,]*,//' -e 's/,.*//'` + + + + + + + + + + + + use_additional=yes + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" + eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" + + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + +# Check whether --with-libiconv-prefix was given. +if test ${with_libiconv_prefix+y} +then : + withval=$with_libiconv_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" + eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" + + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + additional_libdir2="$withval/$acl_libdirstem2" + additional_libdir3="$withval/$acl_libdirstem3" + fi + fi + +fi + + if test "X$additional_libdir2" = "X$additional_libdir"; then + additional_libdir2= + fi + if test "X$additional_libdir3" = "X$additional_libdir"; then + additional_libdir3= + fi + LIBICONV= + LTLIBICONV= + INCICONV= + LIBICONV_PREFIX= + HAVE_LIBICONV= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='iconv ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + for additional_libdir_variable in additional_libdir additional_libdir2 additional_libdir3; do + if test "X$found_dir" = "X"; then + eval dir=\$$additional_libdir_variable + if test -n "$dir"; then + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + fi + done + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBICONV; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem3"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem3 | */$acl_libdirstem3/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem3/"'*$,,'` + if test "$name" = 'iconv'; then + LIBICONV_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCICONV; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + saved_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$saved_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + dependency_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$dependency_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$dependency_libdir" != "X/usr/$acl_libdirstem2" \ + && test "X$dependency_libdir" != "X/usr/$acl_libdirstem3"; then + haveit= + if test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem2" \ + || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem3"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X-L$dependency_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$dependency_libdir"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$dependency_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBICONV; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X-L$dependency_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$dependency_libdir"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$dependency_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + dep=`echo "X$dep" | sed -e 's/^X-l//'` + if test "X$dep" != Xc \ + || case $host_os in + linux* | gnu* | k*bsd*-gnu) false ;; + *) true ;; + esac; then + names_next_round="$names_next_round $dep" + fi + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" + ;; + esac + done + fi + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_saved_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_saved_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_saved_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_saved_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" + done + fi + + + + + + + + gl_sed_double_backslashes='s/\\/\\\\/g' + gl_sed_escape_doublequotes='s/"/\\"/g' + gl_sed_escape_for_make_1="s,\\([ \"&'();<>\\\\\`|]\\),\\\\\\1,g" + gl_sed_escape_for_make_2='s,\$,\\$$,g' + case `echo r | tr -d '\r'` in + '') gl_tr_cr='\015' ;; + *) gl_tr_cr='\r' ;; + esac + + + gl_saved_prefix="${prefix}" + gl_saved_datarootdir="${datarootdir}" + gl_saved_localedir="${localedir}" + if test "X$prefix" = "XNONE"; then + prefix="$ac_default_prefix" + fi + eval datarootdir="$datarootdir" + eval localedir="$localedir" + + + + + + gl_final_localedir="$localedir" + case "$build_os" in + cygwin*) + case "$host_os" in + mingw* | windows*) + gl_final_localedir=`cygpath -w "$gl_final_localedir"` ;; + esac + ;; + esac + localedir_c=`printf '%s\n' "$gl_final_localedir" | sed -e "$gl_sed_double_backslashes" -e "$gl_sed_escape_doublequotes" | tr -d "$gl_tr_cr"` + localedir_c='"'"$localedir_c"'"' + + + localedir_c_make=`printf '%s\n' "$localedir_c" | sed -e "$gl_sed_escape_for_make_1" -e "$gl_sed_escape_for_make_2" | tr -d "$gl_tr_cr"` + if test "$localedir_c_make" = '\"'"${gl_final_localedir}"'\"'; then + localedir_c_make='\"$(localedir)\"' + fi + + + localedir="${gl_saved_localedir}" + datarootdir="${gl_saved_datarootdir}" + prefix="${gl_saved_prefix}" + + + + + + + + + + + + + + + + + + + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5 +printf %s "checking for CFPreferencesCopyAppValue... " >&6; } +if test ${gt_cv_func_CFPreferencesCopyAppValue+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) gt_saved_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main (void) +{ +CFPreferencesCopyAppValue(NULL, NULL) + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + gt_cv_func_CFPreferencesCopyAppValue=yes +else case e in #( + e) gt_cv_func_CFPreferencesCopyAppValue=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_saved_LIBS" ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5 +printf '%s\n' "$gt_cv_func_CFPreferencesCopyAppValue" >&6; } + if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then + +printf '%s\n' "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h + + fi + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyPreferredLanguages" >&5 +printf %s "checking for CFLocaleCopyPreferredLanguages... " >&6; } +if test ${gt_cv_func_CFLocaleCopyPreferredLanguages+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) gt_saved_LIBS="$LIBS" + LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main (void) +{ +CFLocaleCopyPreferredLanguages(); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + gt_cv_func_CFLocaleCopyPreferredLanguages=yes +else case e in #( + e) gt_cv_func_CFLocaleCopyPreferredLanguages=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gt_saved_LIBS" ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyPreferredLanguages" >&5 +printf '%s\n' "$gt_cv_func_CFLocaleCopyPreferredLanguages" >&6; } + if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then + +printf '%s\n' "#define HAVE_CFLOCALECOPYPREFERREDLANGUAGES 1" >>confdefs.h + + fi + INTL_MACOSX_LIBS= + if test $gt_cv_func_CFPreferencesCopyAppValue = yes \ + || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then + INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation -Wl,-framework -Wl,CoreServices" + fi + + + + + INTL_WINDOWS_LIBS= + case "$host_os" in + mingw* | windows*) INTL_WINDOWS_LIBS='-ladvapi32' ;; + esac + + + + + LIBINTL= + LTLIBINTL= + POSUB= + + case " $gt_needs " in + *" need-formatstring-macros "*) gt_api_version=3 ;; + *" need-ngettext "*) gt_api_version=2 ;; + *) gt_api_version=1 ;; + esac + gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc" + gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl" + + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + + + if test $gt_api_version -ge 3; then + gt_revision_test_code=' +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +' + else + gt_revision_test_code= + fi + if test $gt_api_version -ge 2; then + gt_expression_test_code=' + * ngettext ("", "", 0)' + else + gt_expression_test_code= + fi + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5 +printf %s "checking for GNU gettext in libc... " >&6; } +if eval test \${$gt_func_gnugettext_libc+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#if defined _MSC_VER +#define _nl_msg_cat_cntr 0 +#else +extern int _nl_msg_cat_cntr; +#endif +extern int *_nl_domain_bindings; +#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings) +#else +#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 +#endif +$gt_revision_test_code + +int +main (void) +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + if test "`uname -sr`" = 'SunOS 5.11'; then + case `uname -v` in + 11.4 | 11.4.*) eval "$gt_func_gnugettext_libc=yes" ;; + *) eval "$gt_func_gnugettext_libc=no" ;; + esac + else + eval "$gt_func_gnugettext_libc=yes" + fi + +else case e in #( + e) eval "$gt_func_gnugettext_libc=no" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +eval ac_res=\$$gt_func_gnugettext_libc + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +printf '%s\n' "$ac_res" >&6; } + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then + + + + + + gl_saved_CPPFLAGS="$CPPFLAGS" + + for element in $INCICONV; do + haveit= + for x in $CPPFLAGS; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5 +printf %s "checking for iconv... " >&6; } +if test ${am_cv_func_iconv+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main (void) +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + am_cv_func_iconv=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + if test "$am_cv_func_iconv" != yes; then + gl_saved_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main (void) +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + am_cv_lib_iconv=yes + am_cv_func_iconv=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + LIBS="$gl_saved_LIBS" + fi + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5 +printf '%s\n' "$am_cv_func_iconv" >&6; } + if test "$am_cv_func_iconv" = yes; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5 +printf %s "checking for working iconv... " >&6; } +if test ${am_cv_func_iconv_works+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) + gl_saved_LIBS="$LIBS" + if test $am_cv_lib_iconv = yes; then + LIBS="$LIBS $LIBICONV" + fi + am_cv_func_iconv_works=no + for ac_iconv_const in '' 'const'; do + if test "$cross_compiling" = yes +then : + case "$host_os" in + aix* | hpux*) am_cv_func_iconv_works="guessing no" ;; + *) am_cv_func_iconv_works="guessing yes" ;; + esac +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +#ifndef ICONV_CONST +# define ICONV_CONST $ac_iconv_const +#endif + +int +main (void) +{ +int result = 0; + /* Test against AIX 5.1...7.2 bug: Failures are not distinguishable from + successful returns. This is even documented in + */ + { + iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8"); + if (cd_utf8_to_88591 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */ + char buf[10]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_utf8_to_88591, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 1; + iconv_close (cd_utf8_to_88591); + } + } + /* Test against macOS 14.4 bug: Failures are not distinguishable from + successful returns. + POSIX:2018 says: "The iconv() function shall ... return the number of + non-identical conversions performed." + But here, the conversion always does transliteration (the suffixes + "//TRANSLIT" and "//IGNORE" have no effect, nor does iconvctl()) and + does not report when it does a non-identical conversion. */ + { + iconv_t cd_utf8_to_88591 = iconv_open ("ISO-8859-1", "UTF-8"); + if (cd_utf8_to_88591 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\305\202"; /* LATIN SMALL LETTER L WITH STROKE */ + char buf[10]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_utf8_to_88591, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + /* Here: + With glibc, GNU libiconv (including macOS up to 13): res == (size_t)-1, errno == EILSEQ. + With musl libc, NetBSD 10, Solaris 11: res == 1. + With macOS 14.4: res == 0, output is "l". */ + if (res == 0) + result |= 2; + iconv_close (cd_utf8_to_88591); + } + } + /* Test against Solaris 10 bug: Failures are not distinguishable from + successful returns. */ + { + iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646"); + if (cd_ascii_to_88591 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\263"; + char buf[10]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_ascii_to_88591, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res == 0) + result |= 4; + iconv_close (cd_ascii_to_88591); + } + } + /* Test against AIX 6.1..7.1 bug: Buffer overrun. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\304"; + static char buf[2] = { (char)0xDE, (char)0xAD }; + ICONV_CONST char *inptr = input; + size_t inbytesleft = 1; + char *outptr = buf; + size_t outbytesleft = 1; + size_t res = iconv (cd_88591_to_utf8, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD) + result |= 8; + iconv_close (cd_88591_to_utf8); + } + } +#if 0 /* This bug could be worked around by the caller. */ + /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */ + { + iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591"); + if (cd_88591_to_utf8 != (iconv_t)(-1)) + { + static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337"; + char buf[50]; + ICONV_CONST char *inptr = input; + size_t inbytesleft = strlen (input); + char *outptr = buf; + size_t outbytesleft = sizeof (buf); + size_t res = iconv (cd_88591_to_utf8, + &inptr, &inbytesleft, + &outptr, &outbytesleft); + if ((int)res > 0) + result |= 16; + iconv_close (cd_88591_to_utf8); + } + } +#endif + /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is + provided. */ + { + /* Try standardized names. */ + iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP"); + /* Try possible *BSD names. */ + iconv_t cd2 = iconv_open ("UTF-8", "eucJP"); + /* Try AIX names. */ + iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP"); + /* Try HP-UX names. */ + iconv_t cd4 = iconv_open ("utf8", "eucJP"); + if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1) + && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1)) + result |= 32; + if (cd1 != (iconv_t)(-1)) + iconv_close (cd1); + if (cd2 != (iconv_t)(-1)) + iconv_close (cd2); + if (cd3 != (iconv_t)(-1)) + iconv_close (cd3); + if (cd4 != (iconv_t)(-1)) + iconv_close (cd4); + } + return result; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO" +then : + am_cv_func_iconv_works=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi + + test "$am_cv_func_iconv_works" = no || break + done + LIBS="$gl_saved_LIBS" + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5 +printf '%s\n' "$am_cv_func_iconv_works" >&6; } + case "$am_cv_func_iconv_works" in + *no) am_func_iconv=no am_cv_lib_iconv=no ;; + *) am_func_iconv=yes ;; + esac + else + am_func_iconv=no am_cv_lib_iconv=no + fi + if test "$am_func_iconv" = yes; then + +printf '%s\n' "#define HAVE_ICONV 1" >>confdefs.h + + fi + if test "$am_cv_lib_iconv" = yes; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5 +printf %s "checking how to link with libiconv... " >&6; } + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5 +printf '%s\n' "$LIBICONV" >&6; } + else + CPPFLAGS="$gl_saved_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + + + + + + + + + + + use_additional=yes + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" + eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" + + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + +# Check whether --with-libintl-prefix was given. +if test ${with_libintl_prefix+y} +then : + withval=$with_libintl_prefix; + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + eval additional_libdir2=\"$exec_prefix/$acl_libdirstem2\" + eval additional_libdir3=\"$exec_prefix/$acl_libdirstem3\" + + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/$acl_libdirstem" + additional_libdir2="$withval/$acl_libdirstem2" + additional_libdir3="$withval/$acl_libdirstem3" + fi + fi + +fi + + if test "X$additional_libdir2" = "X$additional_libdir"; then + additional_libdir2= + fi + if test "X$additional_libdir3" = "X$additional_libdir"; then + additional_libdir3= + fi + LIBINTL= + LTLIBINTL= + INCINTL= + LIBINTL_PREFIX= + HAVE_LIBINTL= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='intl ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + eval libname=\"$acl_libname_spec\" # typically: libname=lib$name + if test -n "$acl_shlibext"; then + shrext=".$acl_shlibext" # typically: shrext=.so + else + shrext= + fi + if test $use_additional = yes; then + for additional_libdir_variable in additional_libdir additional_libdir2 additional_libdir3; do + if test "X$found_dir" = "X"; then + eval dir=\$$additional_libdir_variable + if test -n "$dir"; then + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + fi + fi + done + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBINTL; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$acl_shlibext"; then + if test -f "$dir/$libname$shrext" && acl_is_expected_elfclass < "$dir/$libname$shrext"; then + found_dir="$dir" + found_so="$dir/$libname$shrext" + else + if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then + ver=`(cd "$dir" && \ + for f in "$libname$shrext".*; do echo "$f"; done \ + | sed -e "s,^$libname$shrext\\\\.,," \ + | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \ + | sed 1q ) 2>/dev/null` + if test -n "$ver" && test -f "$dir/$libname$shrext.$ver" && acl_is_expected_elfclass < "$dir/$libname$shrext.$ver"; then + found_dir="$dir" + found_so="$dir/$libname$shrext.$ver" + fi + else + eval library_names=\"$acl_library_names_spec\" + for f in $library_names; do + if test -f "$dir/$f" && acl_is_expected_elfclass < "$dir/$f"; then + found_dir="$dir" + found_so="$dir/$f" + break + fi + done + fi + fi + fi + if test "X$found_dir" = "X"; then + if test -f "$dir/$libname.$acl_libext" && ${AR-ar} -p "$dir/$libname.$acl_libext" | acl_is_expected_elfclass; then + found_dir="$dir" + found_a="$dir/$libname.$acl_libext" + fi + fi + if test "X$found_dir" != "X"; then + if test -f "$dir/$libname.la"; then + found_la="$dir/$libname.la" + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no \ + || test "X$found_dir" = "X/usr/$acl_libdirstem" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem2" \ + || test "X$found_dir" = "X/usr/$acl_libdirstem3"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$acl_hardcode_direct" = yes; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" + fi + if test "$acl_hardcode_minus_L" != no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */$acl_libdirstem | */$acl_libdirstem/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem2 | */$acl_libdirstem2/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + */$acl_libdirstem3 | */$acl_libdirstem3/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem3/"'*$,,'` + if test "$name" = 'intl'; then + LIBINTL_PREFIX="$basedir" + fi + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCINTL; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + saved_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$saved_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + dependency_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$dependency_libdir" != "X/usr/$acl_libdirstem" \ + && test "X$dependency_libdir" != "X/usr/$acl_libdirstem2" \ + && test "X$dependency_libdir" != "X/usr/$acl_libdirstem3"; then + haveit= + if test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem" \ + || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem2" \ + || test "X$dependency_libdir" = "X/usr/local/$acl_libdirstem3"; then + if test -n "$GCC"; then + case $host_os in + linux* | gnu* | k*bsd*-gnu) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X-L$dependency_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$dependency_libdir"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$dependency_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBINTL; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X-L$dependency_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$dependency_libdir"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$dependency_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + dep=`echo "X$dep" | sed -e 's/^X-l//'` + if test "X$dep" != Xc \ + || case $host_os in + linux* | gnu* | k*bsd*-gnu) false ;; + *) true ;; + esac; then + names_next_round="$names_next_round $dep" + fi + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" + ;; + esac + done + fi + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$acl_hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir" + done + acl_saved_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_saved_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_saved_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$acl_hardcode_libdir_flag_spec\" + libdir="$acl_saved_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" + done + fi + + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5 +printf %s "checking for GNU gettext in libintl... " >&6; } +if eval test \${$gt_func_gnugettext_libintl+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) gt_saved_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_saved_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#if defined _MSC_VER +#define _nl_msg_cat_cntr 0 +#else +extern int _nl_msg_cat_cntr; +#endif +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); +#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) +#else +#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 +#endif +$gt_revision_test_code + +int +main (void) +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + eval "$gt_func_gnugettext_libintl=yes" +else case e in #( + e) eval "$gt_func_gnugettext_libintl=no" ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + gt_LIBINTL_EXTRA= + case "$host_os" in + darwin*) gt_LIBINTL_EXTRA="$INTL_MACOSX_LIBS" ;; + aix*) gt_LIBINTL_EXTRA="-lpthread" ;; + mingw* | windows*) gt_LIBINTL_EXTRA="$INTL_WINDOWS_LIBS" ;; + esac + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } \ + && { test -n "$LIBICONV" || test -n "$gt_LIBINTL_EXTRA"; }; then + LIBS="$LIBS $LIBICONV $gt_LIBINTL_EXTRA" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#if defined _MSC_VER +#define _nl_msg_cat_cntr 0 +#else +extern int _nl_msg_cat_cntr; +#endif +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (const char *); +#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias ("")) +#else +#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0 +#endif +$gt_revision_test_code + +int +main (void) +{ + +bindtextdomain ("", ""); +return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + LIBINTL="$LIBINTL $LIBICONV $gt_LIBINTL_EXTRA" + LTLIBINTL="$LTLIBINTL $LTLIBICONV $gt_LIBINTL_EXTRA" + eval "$gt_func_gnugettext_libintl=yes" + +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + fi + CPPFLAGS="$gt_saved_CPPFLAGS" + LIBS="$gt_saved_LIBS" ;; +esac +fi +eval ac_res=\$$gt_func_gnugettext_libintl + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +printf '%s\n' "$ac_res" >&6; } + fi + + if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \ + || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools \ + && test "$PACKAGE" != libintl; }; then + gt_use_preinstalled_gnugettext=yes + else + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + + + if test -n "$INTL_MACOSX_LIBS"; then + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$gt_cv_use_gnu_libintl" = "yes"; then + LIBINTL="$LIBINTL $INTL_MACOSX_LIBS" + LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS" + fi + fi + + if test -n "$INTL_WINDOWS_LIBS"; then + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$gt_cv_use_gnu_libintl" = "yes"; then + LIBINTL="$LIBINTL $INTL_WINDOWS_LIBS" + LTLIBINTL="$LTLIBINTL $INTL_WINDOWS_LIBS" + fi + fi + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$gt_cv_use_gnu_libintl" = "yes"; then + +printf '%s\n' "#define ENABLE_NLS 1" >>confdefs.h + + else + USE_NLS=no + fi + fi + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5 +printf %s "checking whether to use NLS... " >&6; } + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5 +printf '%s\n' "$USE_NLS" >&6; } + if test "$USE_NLS" = "yes"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5 +printf %s "checking where the gettext function comes from... " >&6; } + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5 +printf '%s\n' "$gt_source" >&6; } + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5 +printf %s "checking how to link with libintl... " >&6; } + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5 +printf '%s\n' "$LIBINTL" >&6; } + + for element in $INCINTL; do + haveit= + for x in $CPPFLAGS; do + + acl_saved_prefix="$prefix" + prefix="$acl_final_prefix" + acl_saved_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_saved_exec_prefix" + prefix="$acl_saved_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + fi + + +printf '%s\n' "#define HAVE_GETTEXT 1" >>confdefs.h + + +printf '%s\n' "#define HAVE_DCGETTEXT 1" >>confdefs.h + + fi + + POSUB=po + fi + + + + + INTLLIBS="$LIBINTL" + + + + + + + + + + +# The command line tools use UTF-8 on native Windows. Non-ASCII characters +# display correctly only when using UCRT and gettext-runtime >= 0.23.1. +case $USE_NLS-$host_os in #( + yes-mingw*) : + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for UCRT and gettext-runtime >= 0.23.1" >&5 +printf %s "checking for UCRT and gettext-runtime >= 0.23.1... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #define WIN32_LEAN_AND_MEAN + #include + #include + + #ifndef _UCRT + #error "Not UCRT" + #endif + + #if LIBINTL_VERSION < 0x001701 + #error "gettext-runtime < 0.23.1" + #endif + +_ACEOF +if ac_fn_c_try_cpp "$LINENO" +then : + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + +else case e in #( + e) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + as_fn_error $? " + Translation support (--enable-nls) on native Windows requires + UCRT and gettext-runtime >= 0.23.1. Use --disable-nls to build + with MSVCRT or old gettext-runtime." "$LINENO" 5 + ;; +esac +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + ;; #( + *) : + ;; +esac + + +############################################################################### +# Checks for header files. +############################################################################### + +echo +echo "System headers and functions:" + +# immintrin.h allows the use of the intrinsic functions if they are available. +# cpuid.h may be used for detecting x86 processor features at runtime. +ac_fn_c_check_header_compile "$LINENO" "immintrin.h" "ac_cv_header_immintrin_h" "$ac_includes_default" +if test "x$ac_cv_header_immintrin_h" = xyes +then : + printf '%s\n' "#define HAVE_IMMINTRIN_H 1" >>confdefs.h + +fi +ac_fn_c_check_header_compile "$LINENO" "cpuid.h" "ac_cv_header_cpuid_h" "$ac_includes_default" +if test "x$ac_cv_header_cpuid_h" = xyes +then : + printf '%s\n' "#define HAVE_CPUID_H 1" >>confdefs.h + +fi + + + +############################################################################### +# Checks for typedefs, structures, and compiler characteristics. +############################################################################### + +ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default" +if test "x$ac_cv_type__Bool" = xyes +then : + +printf '%s\n' "#define HAVE__BOOL 1" >>confdefs.h + + +fi + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99 or later" >&5 +printf %s "checking for stdbool.h that conforms to C99 or later... " >&6; } +if test ${ac_cv_header_stdbool_h+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + + /* "true" and "false" should be usable in #if expressions and + integer constant expressions, and "bool" should be a valid + type name. + + Although C99 requires bool, true, and false to be macros, + C23 and C++11 overrule that, so do not test for that. + Although C99 requires __bool_true_false_are_defined and + _Bool, C23 says they are obsolescent, so do not require + them. */ + + #if !true + #error "'true' is not true" + #endif + #if true != 1 + #error "'true' is not equal to 1" + #endif + char b[true == 1 ? 1 : -1]; + char c[true]; + + #if false + #error "'false' is not false" + #endif + #if false != 0 + #error "'false' is not equal to 0" + #endif + char d[false == 0 ? 1 : -1]; + + enum { e = false, f = true, g = false * true, h = true * 256 }; + + char i[(bool) 0.5 == true ? 1 : -1]; + char j[(bool) 0.0 == false ? 1 : -1]; + char k[sizeof (bool) > 0 ? 1 : -1]; + + struct sb { bool s: 1; bool t; } s; + char l[sizeof s.t > 0 ? 1 : -1]; + + /* The following fails for + HP aC++/ANSI C B3910B A.05.55 [Dec 04 2003]. */ + bool m[h]; + char n[sizeof m == h * sizeof m[0] ? 1 : -1]; + char o[-1 - (bool) 0 < 0 ? 1 : -1]; + /* Catch a bug in an HP-UX C compiler. See + https://gcc.gnu.org/ml/gcc-patches/2003-12/msg02303.html + https://lists.gnu.org/r/bug-coreutils/2005-11/msg00161.html + */ + bool p = true; + bool *pp = &p; + +int +main (void) +{ + + bool ps = &s; + *pp |= p; + *pp |= ! p; + + /* Refer to every declared value, so they cannot be + discarded as unused. */ + return (!b + !c + !d + !e + !f + !g + !h + !i + !j + !k + + !l + !m + !n + !o + !p + !pp + !ps); + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_header_stdbool_h=yes +else case e in #( + e) ac_cv_header_stdbool_h=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5 +printf '%s\n' "$ac_cv_header_stdbool_h" >&6; } + +if test $ac_cv_header_stdbool_h = yes; then + +printf '%s\n' "#define HAVE_STDBOOL_H 1" >>confdefs.h + +fi + + +ac_fn_c_find_uintX_t "$LINENO" "8" "ac_cv_c_uint8_t" +case $ac_cv_c_uint8_t in #( + no|yes) ;; #( + *) + +printf '%s\n' "#define _UINT8_T 1" >>confdefs.h + + +printf '%s\n' "#define uint8_t $ac_cv_c_uint8_t" >>confdefs.h +;; + esac + +ac_fn_c_find_uintX_t "$LINENO" "16" "ac_cv_c_uint16_t" +case $ac_cv_c_uint16_t in #( + no|yes) ;; #( + *) + + +printf '%s\n' "#define uint16_t $ac_cv_c_uint16_t" >>confdefs.h +;; + esac + +ac_fn_c_find_intX_t "$LINENO" "32" "ac_cv_c_int32_t" +case $ac_cv_c_int32_t in #( + no|yes) ;; #( + *) + +printf '%s\n' "#define int32_t $ac_cv_c_int32_t" >>confdefs.h +;; +esac + +ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t" +case $ac_cv_c_uint32_t in #( + no|yes) ;; #( + *) + +printf '%s\n' "#define _UINT32_T 1" >>confdefs.h + + +printf '%s\n' "#define uint32_t $ac_cv_c_uint32_t" >>confdefs.h +;; + esac + +ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t" +case $ac_cv_c_int64_t in #( + no|yes) ;; #( + *) + +printf '%s\n' "#define int64_t $ac_cv_c_int64_t" >>confdefs.h +;; +esac + +ac_fn_c_find_uintX_t "$LINENO" "64" "ac_cv_c_uint64_t" +case $ac_cv_c_uint64_t in #( + no|yes) ;; #( + *) + +printf '%s\n' "#define _UINT64_T 1" >>confdefs.h + + +printf '%s\n' "#define uint64_t $ac_cv_c_uint64_t" >>confdefs.h +;; + esac + + + ac_fn_c_check_type "$LINENO" "uintptr_t" "ac_cv_type_uintptr_t" "$ac_includes_default" +if test "x$ac_cv_type_uintptr_t" = xyes +then : + +printf '%s\n' "#define HAVE_UINTPTR_T 1" >>confdefs.h + +else case e in #( + e) for ac_type in 'unsigned int' 'unsigned long int' \ + 'unsigned long long int'; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main (void) +{ +static int test_array [1 - 2 * !(sizeof (void *) <= sizeof ($ac_type))]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + +printf '%s\n' "#define uintptr_t $ac_type" >>confdefs.h + + ac_type= +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + test -z "$ac_type" && break + done ;; +esac +fi + + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like 'int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking size of size_t" >&5 +printf %s "checking size of size_t... " >&6; } +if test ${ac_cv_sizeof_size_t+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (size_t))" "ac_cv_sizeof_size_t" "$ac_includes_default" +then : + +else case e in #( + e) ac_cv_sizeof_size_t=0 ;; +esac +fi + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_size_t" >&5 +printf '%s\n' "$ac_cv_sizeof_size_t" >&6; } + + + +printf '%s\n' "#define SIZEOF_SIZE_T $ac_cv_sizeof_size_t" >>confdefs.h + + + +# The command line tool can copy high resolution timestamps if such +# information is available in struct stat. Otherwise one second accuracy +# is used. +ac_fn_c_check_member "$LINENO" "struct stat" "st_atim.tv_nsec" "ac_cv_member_struct_stat_st_atim_tv_nsec" "$ac_includes_default" +if test "x$ac_cv_member_struct_stat_st_atim_tv_nsec" = xyes +then : + +printf '%s\n' "#define HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC 1" >>confdefs.h + + +fi +ac_fn_c_check_member "$LINENO" "struct stat" "st_atimespec.tv_nsec" "ac_cv_member_struct_stat_st_atimespec_tv_nsec" "$ac_includes_default" +if test "x$ac_cv_member_struct_stat_st_atimespec_tv_nsec" = xyes +then : + +printf '%s\n' "#define HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC 1" >>confdefs.h + + +fi +ac_fn_c_check_member "$LINENO" "struct stat" "st_atimensec" "ac_cv_member_struct_stat_st_atimensec" "$ac_includes_default" +if test "x$ac_cv_member_struct_stat_st_atimensec" = xyes +then : + +printf '%s\n' "#define HAVE_STRUCT_STAT_ST_ATIMENSEC 1" >>confdefs.h + + +fi +ac_fn_c_check_member "$LINENO" "struct stat" "st_uatime" "ac_cv_member_struct_stat_st_uatime" "$ac_includes_default" +if test "x$ac_cv_member_struct_stat_st_uatime" = xyes +then : + +printf '%s\n' "#define HAVE_STRUCT_STAT_ST_UATIME 1" >>confdefs.h + + +fi +ac_fn_c_check_member "$LINENO" "struct stat" "st_atim.st__tim.tv_nsec" "ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" "$ac_includes_default" +if test "x$ac_cv_member_struct_stat_st_atim_st__tim_tv_nsec" = xyes +then : + +printf '%s\n' "#define HAVE_STRUCT_STAT_ST_ATIM_ST__TIM_TV_NSEC 1" >>confdefs.h + + +fi + + +# Check whether --enable-largefile was given. +if test ${enable_largefile+y} +then : + enableval=$enable_largefile; +fi +if test "$enable_largefile,$enable_year2038" != no,no +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to support large files" >&5 +printf %s "checking for $CC option to support large files... " >&6; } +if test ${ac_cv_sys_largefile_opts+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_save_CPPFLAGS=$CPPFLAGS + ac_opt_found=no + for ac_opt in "none needed" "-D_FILE_OFFSET_BITS=64" "-D_LARGE_FILES=1"; do + if test x"$ac_opt" != x"none needed" +then : + CPPFLAGS="$ac_save_CPPFLAGS $ac_opt" +fi + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#ifndef FTYPE +# define FTYPE off_t +#endif + /* Check that FTYPE can represent 2**63 - 1 correctly. + We can't simply define LARGE_FTYPE to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_FTYPE (((FTYPE) 1 << 31 << 31) - 1 + ((FTYPE) 1 << 31 << 31)) + int FTYPE_is_large[(LARGE_FTYPE % 2147483629 == 721 + && LARGE_FTYPE % 2147483647 == 1) + ? 1 : -1]; +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + if test x"$ac_opt" = x"none needed" +then : + # GNU/Linux s390x and alpha need _FILE_OFFSET_BITS=64 for wide ino_t. + CPPFLAGS="$CPPFLAGS -DFTYPE=ino_t" + if ac_fn_c_try_compile "$LINENO" +then : + +else case e in #( + e) CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=64" + if ac_fn_c_try_compile "$LINENO" +then : + ac_opt='-D_FILE_OFFSET_BITS=64' +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam +fi + ac_cv_sys_largefile_opts=$ac_opt + ac_opt_found=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + test $ac_opt_found = no || break + done + CPPFLAGS=$ac_save_CPPFLAGS + + test $ac_opt_found = yes || ac_cv_sys_largefile_opts="support not detected" ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_opts" >&5 +printf '%s\n' "$ac_cv_sys_largefile_opts" >&6; } + +ac_have_largefile=yes +case $ac_cv_sys_largefile_opts in #( + "none needed") : + ;; #( + "supported through gnulib") : + ;; #( + "support not detected") : + ac_have_largefile=no ;; #( + "-D_FILE_OFFSET_BITS=64") : + +printf '%s\n' "#define _FILE_OFFSET_BITS 64" >>confdefs.h + ;; #( + "-D_LARGE_FILES=1") : + +printf '%s\n' "#define _LARGE_FILES 1" >>confdefs.h + ;; #( + *) : + as_fn_error $? "internal error: bad value for \$ac_cv_sys_largefile_opts" "$LINENO" 5 ;; +esac + +if test "$enable_year2038" != no +then : + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC option to support timestamps after 2038" >&5 +printf %s "checking for $CC option to support timestamps after 2038... " >&6; } +if test ${ac_cv_sys_year2038_opts+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_save_CPPFLAGS="$CPPFLAGS" + ac_opt_found=no + for ac_opt in "none needed" "-D_TIME_BITS=64" "-D__MINGW_USE_VC2005_COMPAT" "-U_USE_32_BIT_TIME_T -D__MINGW_USE_VC2005_COMPAT"; do + if test x"$ac_opt" != x"none needed" +then : + CPPFLAGS="$ac_save_CPPFLAGS $ac_opt" +fi + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #include + /* Check that time_t can represent 2**32 - 1 correctly. */ + #define LARGE_TIME_T \\ + ((time_t) (((time_t) 1 << 30) - 1 + 3 * ((time_t) 1 << 30))) + int verify_time_t_range[(LARGE_TIME_T / 65537 == 65535 + && LARGE_TIME_T % 65537 == 0) + ? 1 : -1]; + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_sys_year2038_opts="$ac_opt" + ac_opt_found=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + test $ac_opt_found = no || break + done + CPPFLAGS="$ac_save_CPPFLAGS" + test $ac_opt_found = yes || ac_cv_sys_year2038_opts="support not detected" ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_year2038_opts" >&5 +printf '%s\n' "$ac_cv_sys_year2038_opts" >&6; } + +ac_have_year2038=yes +case $ac_cv_sys_year2038_opts in #( + "none needed") : + ;; #( + "support not detected") : + ac_have_year2038=no ;; #( + "-D_TIME_BITS=64") : + +printf '%s\n' "#define _TIME_BITS 64" >>confdefs.h + ;; #( + "-D__MINGW_USE_VC2005_COMPAT") : + +printf '%s\n' "#define __MINGW_USE_VC2005_COMPAT 1" >>confdefs.h + ;; #( + "-U_USE_32_BIT_TIME_T"*) : + { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error $? "the 'time_t' type is currently forced to be 32-bit. It +will stop working after mid-January 2038. Remove +_USE_32BIT_TIME_T from the compiler flags. +See 'config.log' for more details" "$LINENO" 5; } ;; #( + *) : + as_fn_error $? "internal error: bad value for \$ac_cv_sys_year2038_opts" "$LINENO" 5 ;; +esac + +fi + +fi + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 +printf %s "checking whether byte ordering is bigendian... " >&6; } +if test ${ac_cv_c_bigendian+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_cv_c_bigendian=unknown + # See if we're dealing with a universal compiler. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifndef __APPLE_CC__ + not a universal capable compiler + #endif + typedef int dummy; + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + + # Check for potential -arch flags. It is not universal unless + # there are at least two -arch flags with different values. + ac_arch= + ac_prev= + for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do + if test -n "$ac_prev"; then + case $ac_word in + i?86 | x86_64 | ppc | ppc64) + if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then + ac_arch=$ac_word + else + ac_cv_c_bigendian=universal + break + fi + ;; + esac + ac_prev= + elif test "x$ac_word" = "x-arch"; then + ac_prev=arch + fi + done +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + if test $ac_cv_c_bigendian = unknown; then + # See if sys/param.h defines the BYTE_ORDER macro. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include + +int +main (void) +{ +#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \\ + && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \\ + && LITTLE_ENDIAN) + bogus endian macros + #endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + # It does; now see whether it defined to BIG_ENDIAN or not. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + #include + +int +main (void) +{ +#if BYTE_ORDER != BIG_ENDIAN + not big endian + #endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_c_bigendian=yes +else case e in #( + e) ac_cv_c_bigendian=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +int +main (void) +{ +#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) + bogus endian macros + #endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + # It does; now see whether it defined to _BIG_ENDIAN or not. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +int +main (void) +{ +#ifndef _BIG_ENDIAN + not big endian + #endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_c_bigendian=yes +else case e in #( + e) ac_cv_c_bigendian=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # Compile a test program. + if test "$cross_compiling" = yes +then : + # Try to guess by grepping values from an object file. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +unsigned short int ascii_mm[] = + { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; + unsigned short int ascii_ii[] = + { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; + int use_ascii (int i) { + return ascii_mm[i] + ascii_ii[i]; + } + unsigned short int ebcdic_ii[] = + { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; + unsigned short int ebcdic_mm[] = + { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; + int use_ebcdic (int i) { + return ebcdic_mm[i] + ebcdic_ii[i]; + } + int + main (int argc, char **argv) + { + /* Intimidate the compiler so that it does not + optimize the arrays away. */ + char *p = argv[0]; + ascii_mm[1] = *p++; ebcdic_mm[1] = *p++; + ascii_ii[1] = *p++; ebcdic_ii[1] = *p++; + return use_ascii (argc) == use_ebcdic (*p); + } +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + if grep BIGenDianSyS conftest$ac_exeext >/dev/null; then + ac_cv_c_bigendian=yes + fi + if grep LiTTleEnDian conftest$ac_exeext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi + fi +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main (void) +{ + + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long int l; + char c[sizeof (long int)]; + } u; + u.l = 1; + return u.c[sizeof (long int) - 1] == 1; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO" +then : + ac_cv_c_bigendian=no +else case e in #( + e) ac_cv_c_bigendian=yes ;; +esac +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi + + fi ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 +printf '%s\n' "$ac_cv_c_bigendian" >&6; } + case $ac_cv_c_bigendian in #( + yes) + printf '%s\n' "#define WORDS_BIGENDIAN 1" >>confdefs.h +;; #( + no) + ;; #( + universal) + +printf '%s\n' "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h + + ;; #( + *) + as_fn_error $? "unknown endianness + presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; + esac + + +# __attribute__((__constructor__)) can be used for one-time initializations. +# Use -Werror because some compilers accept unknown attributes and just +# give a warning. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if __attribute__((__constructor__)) can be used" >&5 +printf %s "checking if __attribute__((__constructor__)) can be used... " >&6; } +have_func_attribute_constructor=no +OLD_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS -Werror" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + __attribute__((__constructor__)) + static void my_constructor_func(void) { return; } + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + + +printf '%s\n' "#define HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR 1" >>confdefs.h + + have_func_attribute_constructor=yes + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + +else case e in #( + e) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext +CFLAGS="$OLD_CFLAGS" + +# The Win95 threading lacks a thread-safe one-time initialization function. +# The one-time initialization is needed for crc32_small.c and crc64_small.c +# create the CRC tables. So if small mode is enabled, the threading mode is +# win95, and the compiler does not support attribute constructor, then we +# would end up with a multithreaded build that is thread-unsafe. As a +# result this configuration is not allowed. +if test "x$enable_small$enable_threads$have_func_attribute_constructor" \ + = xyeswin95no; then + as_fn_error $? " + --enable-threads=win95 and --enable-small cannot be used + at the same time with a compiler that doesn't support + __attribute__((__constructor__))" "$LINENO" 5 +fi + + +############################################################################### +# Checks for library functions. +############################################################################### + +# Gnulib replacements as needed +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC options to detect undeclared functions" >&5 +printf %s "checking for $CC options to detect undeclared functions... " >&6; } +if test ${ac_cv_c_undeclared_builtin_options+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_save_CFLAGS=$CFLAGS + ac_cv_c_undeclared_builtin_options='cannot detect' + for ac_arg in '' -fno-builtin; do + CFLAGS="$ac_save_CFLAGS $ac_arg" + # This test program should *not* compile successfully. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ +(void) strchr; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + +else case e in #( + e) # This test program should compile successfully. + # No library function is consistently available on + # freestanding implementations, so test against a dummy + # declaration. Include always-available headers on the + # off chance that they somehow elicit warnings. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include +extern void ac_decl (int, char *); + +int +main (void) +{ +(void) ac_decl (0, (char *) 0); + (void) ac_decl; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + if test x"$ac_arg" = x +then : + ac_cv_c_undeclared_builtin_options='none needed' +else case e in #( + e) ac_cv_c_undeclared_builtin_options=$ac_arg ;; +esac +fi + break +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + done + CFLAGS=$ac_save_CFLAGS + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_undeclared_builtin_options" >&5 +printf '%s\n' "$ac_cv_c_undeclared_builtin_options" >&6; } + case $ac_cv_c_undeclared_builtin_options in #( + 'cannot detect') : + { { printf '%s\n' "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5 +printf '%s\n' "$as_me: error: in '$ac_pwd':" >&2;} +as_fn_error $? "cannot make $CC report undeclared builtins +See 'config.log' for more details" "$LINENO" 5; } ;; #( + 'none needed') : + ac_c_undeclared_builtin_options='' ;; #( + *) : + ac_c_undeclared_builtin_options=$ac_cv_c_undeclared_builtin_options ;; +esac + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $CC options to ignore future-version functions" >&5 +printf %s "checking for $CC options to ignore future-version functions... " >&6; } +if test ${ac_cv_c_future_darwin_options+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_compile_saved="$ac_compile" + ac_compile="$ac_compile -Werror=unguarded-availability-new" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#if ! (defined __APPLE__ && defined __MACH__) + #error "-Werror=unguarded-availability-new not needed here" + #endif + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + ac_cv_c_future_darwin_options='-Werror=unguarded-availability-new' +else case e in #( + e) ac_cv_c_future_darwin_options='none needed' ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + ac_compile="$ac_compile_saved" + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_future_darwin_options" >&5 +printf '%s\n' "$ac_cv_c_future_darwin_options" >&6; } + case $ac_cv_c_future_darwin_options in #( + 'none needed') : + ac_c_future_darwin_options='' ;; #( + *) : + ac_c_future_darwin_options=$ac_cv_c_future_darwin_options ;; +esac + + + if test -z "$gl_replace_getopt"; then + for ac_header in getopt.h +do : + ac_fn_c_check_header_compile "$LINENO" "getopt.h" "ac_cv_header_getopt_h" "$ac_includes_default" +if test "x$ac_cv_header_getopt_h" = xyes +then : + printf '%s\n' "#define HAVE_GETOPT_H 1" >>confdefs.h + +else case e in #( + e) gl_replace_getopt=yes ;; +esac +fi + +done + fi + + if test -z "$gl_replace_getopt"; then + + for ac_func in getopt_long +do : + ac_fn_c_check_func "$LINENO" "getopt_long" "ac_cv_func_getopt_long" +if test "x$ac_cv_func_getopt_long" = xyes +then : + printf '%s\n' "#define HAVE_GETOPT_LONG 1" >>confdefs.h + +else case e in #( + e) gl_replace_getopt=yes ;; +esac +fi + +done + fi + + if test -z "$gl_replace_getopt"; then + ac_fn_check_decl "$LINENO" "optreset" "ac_cv_have_decl_optreset" "#include +" "$ac_c_undeclared_builtin_options$ac_c_future_darwin_options" "CFLAGS" +if test "x$ac_cv_have_decl_optreset" = xyes +then : + +printf '%s\n' "#define HAVE_OPTRESET 1" >>confdefs.h + +fi + fi + + + + + + + + + if test -n "$gl_replace_getopt"; then + + case " $LIBOBJS " in + *" getopt.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS getopt.$ac_objext" + ;; +esac + + case " $LIBOBJS " in + *" getopt1.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS getopt1.$ac_objext" + ;; +esac + + + + + +printf '%s\n' "#define __GETOPT_PREFIX rpl_" >>confdefs.h + + + GETOPT_H=getopt.h + + + fi + + +# If clock_gettime() is available, liblzma with pthreads may use it, and +# xz may use it even when threading support is disabled. In XZ Utils 5.4.x +# and older, configure checked for clock_gettime() only when using pthreads. +# This way non-threaded builds of liblzma didn't get a useless dependency on +# librt which further had a dependency on libpthread. Avoiding these was +# useful when a small build was needed, for example, for initramfs use. +# +# The above reasoning is thoroughly obsolete: On GNU/Linux, librt hasn't +# been needed for clock_gettime() since glibc 2.17 (2012-12-25). +# Solaris 10 needs librt but Solaris 11 doesn't anymore. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for library containing clock_gettime" >&5 +printf %s "checking for library containing clock_gettime... " >&6; } +if test ${ac_cv_search_clock_gettime+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. + The 'extern "C"' is for builds by C++ compilers; + although this is not generally supported in C code supporting it here + has little cost and some practical benefit (sr 110532). */ +#ifdef __cplusplus +extern "C" +#endif +char clock_gettime (void); +int +main (void) +{ +return clock_gettime (); + ; + return 0; +} +_ACEOF +for ac_lib in '' rt +do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO" +then : + ac_cv_search_clock_gettime=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext + if test ${ac_cv_search_clock_gettime+y} +then : + break +fi +done +if test ${ac_cv_search_clock_gettime+y} +then : + +else case e in #( + e) ac_cv_search_clock_gettime=no ;; +esac +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_clock_gettime" >&5 +printf '%s\n' "$ac_cv_search_clock_gettime" >&6; } +ac_res=$ac_cv_search_clock_gettime +if test "$ac_res" != no +then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +fi + +ac_fn_c_check_func "$LINENO" "clock_gettime" "ac_cv_func_clock_gettime" +if test "x$ac_cv_func_clock_gettime" = xyes +then : + printf '%s\n' "#define HAVE_CLOCK_GETTIME 1" >>confdefs.h + +fi + +ac_fn_check_decl "$LINENO" "CLOCK_MONOTONIC" "ac_cv_have_decl_CLOCK_MONOTONIC" "#include +" "$ac_c_undeclared_builtin_options$ac_c_future_darwin_options" "CFLAGS" +if test "x$ac_cv_have_decl_CLOCK_MONOTONIC" = xyes +then : + +printf '%s\n' "#define HAVE_CLOCK_MONOTONIC 1" >>confdefs.h + +fi + +# Find the best function to set timestamps. + + for ac_func in futimens futimes futimesat utimes _futime utime +do : + as_ac_var=`printf '%s\n' "ac_cv_func_$ac_func" | sed "$as_sed_sh"` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes" +then : + cat >>confdefs.h <<_ACEOF +#define `printf '%s\n' "HAVE_$ac_func" | sed "$as_sed_cpp"` 1 +_ACEOF + break +fi + +done + +# This is nice to have but not mandatory. +ac_fn_c_check_func "$LINENO" "posix_fadvise" "ac_cv_func_posix_fadvise" +if test "x$ac_cv_func_posix_fadvise" = xyes +then : + printf '%s\n' "#define HAVE_POSIX_FADVISE 1" >>confdefs.h + +fi + + + + + + + + + +ac_fn_check_decl "$LINENO" "program_invocation_name" "ac_cv_have_decl_program_invocation_name" "#include +" "$ac_c_undeclared_builtin_options$ac_c_future_darwin_options" "CFLAGS" +if test "x$ac_cv_have_decl_program_invocation_name" = xyes +then : + +printf '%s\n' "#define HAVE_PROGRAM_INVOCATION_NAME 1" >>confdefs.h + +fi + + + + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if __builtin_bswap16/32/64 are supported" >&5 +printf %s "checking if __builtin_bswap16/32/64 are supported... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ +__builtin_bswap16(1); + __builtin_bswap32(1); + __builtin_bswap64(1); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + +printf '%s\n' "#define HAVE___BUILTIN_BSWAPXX 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + +else case e in #( + e) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + + # Look for other byteswapping methods. + for ac_header in byteswap.h sys/endian.h sys/byteorder.h +do : + as_ac_Header=`printf '%s\n' "ac_cv_header_$ac_header" | sed "$as_sed_sh"` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes" +then : + cat >>confdefs.h <<_ACEOF +#define `printf '%s\n' "HAVE_$ac_header" | sed "$as_sed_cpp"` 1 +_ACEOF + break +fi + +done + + # Even if we have byteswap.h we may lack the specific macros/functions. + if test x$ac_cv_header_byteswap_h = xyes ; then + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if bswap_16 is available" >&5 +printf %s "checking if bswap_16 is available... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +int +main(void) +{ + bswap_16(42); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + +printf '%s\n' "#define HAVE_BSWAP_16 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if bswap_32 is available" >&5 +printf %s "checking if bswap_32 is available... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +int +main(void) +{ + bswap_32(42); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + +printf '%s\n' "#define HAVE_BSWAP_32 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if bswap_64 is available" >&5 +printf %s "checking if bswap_64 is available... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +int +main(void) +{ + bswap_64(42); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + +printf '%s\n' "#define HAVE_BSWAP_64 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + +else case e in #( + e) { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + + fi + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + +# On archs that we use tuklib_integer_strict_align() (see below), we need +# objdump to detect support for unaligned access. (Libtool needs objdump +# too, so Libtool does this same tool check as well.) +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_OBJDUMP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 +printf '%s\n' "$OBJDUMP" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +printf %s "checking for $ac_word... " >&6; } +if test ${ac_cv_prog_ac_ct_OBJDUMP+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + case $as_dir in #((( + '') as_dir=./ ;; + */) ;; + *) as_dir=$as_dir/ ;; + esac + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + printf '%s\n' "$as_me:${as_lineno-$LINENO}: found $as_dir$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi ;; +esac +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 +printf '%s\n' "$ac_ct_OBJDUMP" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +printf '%s\n' "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + + +# An internal helper that attempts to detect if -mstrict-align or +# -mno-strict-align is in effect. This sets enable_unaligned_access=yes +# if compilation succeeds and the regex passed as an argument does *not* +# match the objdump output of a check program. Otherwise this sets +# enable_unaligned_access=no. +tuklib_integer_strict_align () +{ + # First guess no. + enable_unaligned_access=no + + # Force -O2 because without optimizations the memcpy() + # won't be optimized out. + tuklib_integer_saved_CFLAGS=$CFLAGS + CFLAGS="$CFLAGS -O2" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #include + unsigned int check_strict_align(const void *p) + { + unsigned int i; + memcpy(&i, p, sizeof(i)); + return i; + } + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + + # Disassemble the test function from the object file. + if $OBJDUMP -d conftest.$ac_objext > conftest.s ; then + # This function should be passed a regex that + # matches if there are instructions that load + # unsigned bytes. Such instructions indicate + # that -mstrict-align is in effect. + # + # NOTE: Use braces to avoid M4 parameter + # expansion. + if grep -- "${1}" conftest.s > /dev/null ; then + : + else + # No single-byte unsigned load + # instructions were found, + # so it seems that -mno-strict-align + # is in effect. + # Override our earlier guess. + enable_unaligned_access=yes + fi + fi + +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + CFLAGS=$tuklib_integer_saved_CFLAGS +} + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if unaligned memory access should be used" >&5 +printf %s "checking if unaligned memory access should be used... " >&6; } +# Check whether --enable-unaligned-access was given. +if test ${enable_unaligned_access+y} +then : + enableval=$enable_unaligned_access; +else case e in #( + e) enable_unaligned_access=auto ;; +esac +fi + +if test "x$enable_unaligned_access" = xauto ; then + # NOTE: There might be other architectures on which unaligned access + # is fast. + case $host_cpu in + i?86|x86_64|powerpc|powerpc64|powerpc64le) + enable_unaligned_access=yes + ;; + arm*|riscv*) + # On 32-bit ARM, GCC and Clang + # #define __ARM_FEATURE_UNALIGNED + # if and only if unaligned access is supported. + # + # RISC-V C API Specification says that if + # __riscv_misaligned_fast is defined then + # unaligned access is known to be fast. + # + # MSVC is handled as a special case: We assume that + # 32-bit ARM supports fast unaligned access. + # If MSVC gets RISC-V support then this will assume + # fast unaligned access on RISC-V too. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #if !defined(__ARM_FEATURE_UNALIGNED) \ + && !defined(__riscv_misaligned_fast) \ + && !defined(_MSC_VER) + compile error + #endif + int main(void) { return 0; } + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + enable_unaligned_access=yes +else case e in #( + e) enable_unaligned_access=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + ;; + aarch64*) + # On ARM64, Clang defines __ARM_FEATURE_UNALIGNED + # if and only if unaligned access is supported. + # However, GCC (at least up to 15.2.0) defines it + # even when using -mstrict-align, so autodetection + # with this macro doesn't work with GCC on ARM64. + # (It does work on 32-bit ARM.) See: + # + # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=111555 + # + # We need three checks: + # + # 1. If __ARM_FEATURE_UNALIGNED is defined and the + # compiler isn't GCC, unaligned access is enabled. + # If the compiler is MSVC, unaligned access is + # enabled even without __ARM_FEATURE_UNALIGNED. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #if defined(__ARM_FEATURE_UNALIGNED) \ + && (!defined(__GNUC__) \ + || defined(__clang__)) + #elif defined(_MSC_VER) + #else + compile error + #endif + int main(void) { return 0; } + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + enable_unaligned_access=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + + # 2. If __ARM_FEATURE_UNALIGNED is not defined, + # unaligned access is disabled. + if test "x$enable_unaligned_access" = xauto ; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #ifdef __ARM_FEATURE_UNALIGNED + compile error + #endif + int main(void) { return 0; } + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + enable_unaligned_access=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + fi + + # 3. Use heuristics to detect if -mstrict-align is + # in effect when building with GCC. + if test "x$enable_unaligned_access" = xauto ; then + tuklib_integer_strict_align \ + '[[:blank:]]ldrb[[:blank:]]' + fi + ;; + loongarch*) + # See sections 7.4, 8.1, and 8.2: + # https://github.com/loongson/la-softdev-convention/blob/v0.2/la-softdev-convention.adoc + # + # That is, desktop and server processors likely support + # unaligned access in hardware but embedded processors + # might not. GCC defaults to -mno-strict-align and so + # do majority of GNU/Linux distributions. As of + # GCC 15.2, there is no predefined macro to detect + # if -mstrict-align or -mno-strict-align is in effect. + # Use heuristics based on compiler output. + + tuklib_integer_strict_align \ + '[[:blank:]]ld\.bu[[:blank:]]' + + ;; + *) + enable_unaligned_access=no + ;; + esac +fi +if test "x$enable_unaligned_access" = xyes ; then + +printf '%s\n' "#define TUKLIB_FAST_UNALIGNED_ACCESS 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if unsafe type punning should be used" >&5 +printf %s "checking if unsafe type punning should be used... " >&6; } +# Check whether --enable-unsafe-type-punning was given. +if test ${enable_unsafe_type_punning+y} +then : + enableval=$enable_unsafe_type_punning; +else case e in #( + e) enable_unsafe_type_punning=no ;; +esac +fi + +if test "x$enable_unsafe_type_punning" = xyes ; then + +printf '%s\n' "#define TUKLIB_USE_UNSAFE_TYPE_PUNNING 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } +else + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } +fi + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if __builtin_assume_aligned is supported" >&5 +printf %s "checking if __builtin_assume_aligned is supported... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ +__builtin_assume_aligned("", 1); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + +printf '%s\n' "#define HAVE___BUILTIN_ASSUME_ALIGNED 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + +else case e in #( + e) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + + + + +# sys/param.h might be needed by sys/sysctl.h. +ac_fn_c_check_header_compile "$LINENO" "sys/param.h" "ac_cv_header_sys_param_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_param_h" = xyes +then : + printf '%s\n' "#define HAVE_SYS_PARAM_H 1" >>confdefs.h + +fi + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to detect the amount of physical memory" >&5 +printf %s "checking how to detect the amount of physical memory... " >&6; } +if test ${tuklib_cv_physmem_method+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) + +# Maybe checking $host_os would be enough but this matches what +# tuklib_physmem.c does. +# +# NOTE: IRIX has a compiler that doesn't error out with #error, so use +# a non-compilable text instead of #error to generate an error. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if defined(_WIN32) || defined(__CYGWIN__) || defined(__OS2__) \ + || defined(__DJGPP__) || defined(__VMS) \ + || defined(AMIGA) || defined(__AROS__) || defined(__QNX__) +int main(void) { return 0; } +#else +compile error +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + tuklib_cv_physmem_method=special +else case e in #( + e) + +# Look for AIX-specific solution before sysconf(), because the test +# for sysconf() will pass on AIX but won't actually work +# (sysconf(_SC_PHYS_PAGES) compiles but always returns -1 on AIX). +# +# NOTE: There is no need to link the check program because it's not calling +# any functions and thus implicit function declarations aren't a problem. +# The unused reference to _system_configuration.physmem might get optimized +# away, and thus the linker might not see that symbol anyway. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include + +int +main(void) +{ + (void)_system_configuration.physmem; + return 0; +} + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + tuklib_cv_physmem_method=aix +else case e in #( + e) + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +int +main(void) +{ + long i; + i = sysconf(_SC_PAGESIZE); + i = sysconf(_SC_PHYS_PAGES); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_physmem_method=sysconf +else case e in #( + e) + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_SYS_PARAM_H +# include +#endif +#include +int +main(void) +{ + int name[2] = { CTL_HW, HW_PHYSMEM }; + unsigned long mem; + size_t mem_ptr_size = sizeof(mem); + sysctl(name, 2, &mem, &mem_ptr_size, NULL, 0); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_physmem_method=sysctl +else case e in #( + e) + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main(void) +{ + int memkb; + int start = 0; + getsysinfo(GSI_PHYSMEM, (caddr_t)&memkb, sizeof(memkb), &start); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_physmem_method=getsysinfo +else case e in #( + e) + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main(void) +{ + struct pst_static pst; + pstat_getstatic(&pst, sizeof(pst), 1, 0); + (void)pst.physical_memory; + (void)pst.page_size; + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_physmem_method=pstat_getstatic +else case e in #( + e) + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +int +main(void) +{ + inv_state_t *st = NULL; + setinvent_r(&st); + getinvent_r(st); + endinvent_r(st); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_physmem_method=getinvent_r +else case e in #( + e) + +# This version of sysinfo() is Linux-specific. Some non-Linux systems have +# different sysinfo() so we must check $host_os. +case $host_os in + linux*) + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +int +main(void) +{ + struct sysinfo si; + sysinfo(&si); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + tuklib_cv_physmem_method=sysinfo + +else case e in #( + e) + tuklib_cv_physmem_method=unknown + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + ;; + *) + tuklib_cv_physmem_method=unknown + ;; +esac + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $tuklib_cv_physmem_method" >&5 +printf '%s\n' "$tuklib_cv_physmem_method" >&6; } + +case $tuklib_cv_physmem_method in + aix) + +printf '%s\n' "#define TUKLIB_PHYSMEM_AIX 1" >>confdefs.h + + ;; + sysconf) + +printf '%s\n' "#define TUKLIB_PHYSMEM_SYSCONF 1" >>confdefs.h + + ;; + sysctl) + +printf '%s\n' "#define TUKLIB_PHYSMEM_SYSCTL 1" >>confdefs.h + + ;; + getsysinfo) + +printf '%s\n' "#define TUKLIB_PHYSMEM_GETSYSINFO 1" >>confdefs.h + + ;; + pstat_getstatic) + +printf '%s\n' "#define TUKLIB_PHYSMEM_PSTAT_GETSTATIC 1" >>confdefs.h + + ;; + getinvent_r) + +printf '%s\n' "#define TUKLIB_PHYSMEM_GETINVENT_R 1" >>confdefs.h + + ;; + sysinfo) + +printf '%s\n' "#define TUKLIB_PHYSMEM_SYSINFO 1" >>confdefs.h + + ;; +esac + + + + +# sys/param.h might be needed by sys/sysctl.h. +ac_fn_c_check_header_compile "$LINENO" "sys/param.h" "ac_cv_header_sys_param_h" "$ac_includes_default" +if test "x$ac_cv_header_sys_param_h" = xyes +then : + printf '%s\n' "#define HAVE_SYS_PARAM_H 1" >>confdefs.h + +fi + + +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking how to detect the number of available CPU cores" >&5 +printf %s "checking how to detect the number of available CPU cores... " >&6; } +if test ${tuklib_cv_cpucores_method+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) + +# Maybe checking $host_os would be enough but this matches what +# tuklib_cpucores.c does. +# +# NOTE: IRIX has a compiler that doesn't error out with #error, so use +# a non-compilable text instead of #error to generate an error. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if defined(_WIN32) || defined(__CYGWIN__) +int main(void) { return 0; } +#else +compile error +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + tuklib_cv_cpucores_method=special +else case e in #( + e) + +# glibc-based systems (GNU/Linux and GNU/kFreeBSD) have sched_getaffinity(). +# The CPU_COUNT() macro was added in glibc 2.9 so we try to link the +# test program instead of merely compiling it. glibc 2.9 is old enough that +# if someone uses the code on older glibc, the fallback to sysconf() should +# be good enough. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +int +main(void) +{ + cpu_set_t cpu_mask; + sched_getaffinity(0, sizeof(cpu_mask), &cpu_mask); + return CPU_COUNT(&cpu_mask); +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_cpucores_method=sched_getaffinity +else case e in #( + e) + +# FreeBSD has both cpuset and sysctl. Look for cpuset first because +# it's a better approach. +# +# This test would match on GNU/kFreeBSD too but it would require +# -lfreebsd-glue when linking and thus in the current form this would +# fail on GNU/kFreeBSD. The above test for sched_getaffinity() matches +# on GNU/kFreeBSD so the test below should never run on that OS. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main(void) +{ + cpuset_t set; + cpuset_getaffinity(CPU_LEVEL_WHICH, CPU_WHICH_PID, -1, + sizeof(set), &set); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_cpucores_method=cpuset +else case e in #( + e) + +# On OS/2, both sysconf() and sysctl() pass the tests in this file, +# but only sysctl() works. On QNX it's the opposite: only sysconf() works +# (although it assumes that _POSIX_SOURCE, _XOPEN_SOURCE, and _POSIX_C_SOURCE +# are undefined or alternatively _QNX_SOURCE is defined). +# +# We test sysctl() first and intentionally break the sysctl() test on QNX +# so that sysctl() is never used on QNX. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef __QNX__ +compile error +#endif +#ifdef HAVE_SYS_PARAM_H +# include +#endif +#include +int +main(void) +{ +#ifdef HW_NCPUONLINE + /* This is preferred on OpenBSD, see tuklib_cpucores.c. */ + int name[2] = { CTL_HW, HW_NCPUONLINE }; +#else + int name[2] = { CTL_HW, HW_NCPU }; +#endif + int cpus; + size_t cpus_size = sizeof(cpus); + sysctl(name, 2, &cpus, &cpus_size, NULL, 0); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_cpucores_method=sysctl +else case e in #( + e) + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +int +main(void) +{ + long i; +#ifdef _SC_NPROCESSORS_ONLN + /* Many systems using sysconf() */ + i = sysconf(_SC_NPROCESSORS_ONLN); +#else + /* IRIX */ + i = sysconf(_SC_NPROC_ONLN); +#endif + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_cpucores_method=sysconf +else case e in #( + e) + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main(void) +{ + struct pst_dynamic pst; + pstat_getdynamic(&pst, sizeof(pst), 1, 0); + (void)pst.psd_proc_cnt; + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + tuklib_cv_cpucores_method=pstat_getdynamic +else case e in #( + e) + + tuklib_cv_cpucores_method=unknown + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $tuklib_cv_cpucores_method" >&5 +printf '%s\n' "$tuklib_cv_cpucores_method" >&6; } + +case $tuklib_cv_cpucores_method in + sched_getaffinity) + +printf '%s\n' "#define TUKLIB_CPUCORES_SCHED_GETAFFINITY 1" >>confdefs.h + + ;; + cpuset) + +printf '%s\n' "#define TUKLIB_CPUCORES_CPUSET 1" >>confdefs.h + + ;; + sysctl) + +printf '%s\n' "#define TUKLIB_CPUCORES_SYSCTL 1" >>confdefs.h + + ;; + sysconf) + +printf '%s\n' "#define TUKLIB_CPUCORES_SYSCONF 1" >>confdefs.h + + ;; + pstat_getdynamic) + +printf '%s\n' "#define TUKLIB_CPUCORES_PSTAT_GETDYNAMIC 1" >>confdefs.h + + ;; +esac + + + + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc and mbstate_t are properly declared" >&5 +printf %s "checking whether mbrtowc and mbstate_t are properly declared... " >&6; } +if test ${ac_cv_func_mbrtowc+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main (void) +{ +wchar_t wc; + char const s[] = ""; + size_t n = 1; + mbstate_t state; + return ! (sizeof state && (mbrtowc) (&wc, s, n, &state)); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + ac_cv_func_mbrtowc=yes +else case e in #( + e) ac_cv_func_mbrtowc=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mbrtowc" >&5 +printf '%s\n' "$ac_cv_func_mbrtowc" >&6; } + if test $ac_cv_func_mbrtowc = yes; then + +printf '%s\n' "#define HAVE_MBRTOWC 1" >>confdefs.h + + fi + +ac_fn_c_check_func "$LINENO" "wcwidth" "ac_cv_func_wcwidth" +if test "x$ac_cv_func_wcwidth" = xyes +then : + printf '%s\n' "#define HAVE_WCWIDTH 1" >>confdefs.h + +fi +ac_fn_c_check_func "$LINENO" "vasprintf" "ac_cv_func_vasprintf" +if test "x$ac_cv_func_vasprintf" = xyes +then : + printf '%s\n' "#define HAVE_VASPRINTF 1" >>confdefs.h + +fi + + + +# If requested, check for system-provided SHA-256. At least the following +# implementations are supported: +# +# OS Headers Library Type Function +# FreeBSD sys/types.h + sha256.h libmd SHA256_CTX SHA256_Init +# NetBSD sys/types.h + sha2.h SHA256_CTX SHA256_Init +# OpenBSD sys/types.h + sha2.h SHA2_CTX SHA256Init +# Solaris sys/types.h + sha2.h libmd SHA256_CTX SHA256Init +# MINIX 3 sys/types.h + sha2.h SHA256_CTX SHA256_Init +# Darwin CommonCrypto/CommonDigest.h CC_SHA256_CTX CC_SHA256_Init +# +# Note that Darwin's CC_SHA256_Update takes buffer size as uint32_t instead +# of size_t. +# +sha256_header_found=no +sha256_type_found=no +sha256_func_found=no +if test "x$enable_external_sha256" = "xyes" +then : + + # Test for Common Crypto before others, because Darwin has sha256.h + # too and we don't want to use that, because on older versions it + # uses OpenSSL functions, whose SHA256_Init is not guaranteed to + # succeed. + for ac_header in CommonCrypto/CommonDigest.h sha256.h sha2.h +do : + as_ac_Header=`printf '%s\n' "ac_cv_header_$ac_header" | sed "$as_sed_sh"` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes" +then : + cat >>confdefs.h <<_ACEOF +#define `printf '%s\n' "HAVE_$ac_header" | sed "$as_sed_cpp"` 1 +_ACEOF + sha256_header_found=yes ; break +fi + +done + if test "x$sha256_header_found" = xyes; then + ac_fn_c_check_type "$LINENO" "CC_SHA256_CTX" "ac_cv_type_CC_SHA256_CTX" "#ifdef HAVE_SYS_TYPES_H + # include + #endif + #ifdef HAVE_COMMONCRYPTO_COMMONDIGEST_H + # include + #endif + #ifdef HAVE_SHA256_H + # include + #endif + #ifdef HAVE_SHA2_H + # include + #endif +" +if test "x$ac_cv_type_CC_SHA256_CTX" = xyes +then : + +printf '%s\n' "#define HAVE_CC_SHA256_CTX 1" >>confdefs.h + +sha256_type_found=yes +fi +ac_fn_c_check_type "$LINENO" "SHA256_CTX" "ac_cv_type_SHA256_CTX" "#ifdef HAVE_SYS_TYPES_H + # include + #endif + #ifdef HAVE_COMMONCRYPTO_COMMONDIGEST_H + # include + #endif + #ifdef HAVE_SHA256_H + # include + #endif + #ifdef HAVE_SHA2_H + # include + #endif +" +if test "x$ac_cv_type_SHA256_CTX" = xyes +then : + +printf '%s\n' "#define HAVE_SHA256_CTX 1" >>confdefs.h + +sha256_type_found=yes +fi +ac_fn_c_check_type "$LINENO" "SHA2_CTX" "ac_cv_type_SHA2_CTX" "#ifdef HAVE_SYS_TYPES_H + # include + #endif + #ifdef HAVE_COMMONCRYPTO_COMMONDIGEST_H + # include + #endif + #ifdef HAVE_SHA256_H + # include + #endif + #ifdef HAVE_SHA2_H + # include + #endif +" +if test "x$ac_cv_type_SHA2_CTX" = xyes +then : + +printf '%s\n' "#define HAVE_SHA2_CTX 1" >>confdefs.h + +sha256_type_found=yes +fi + + if test "x$sha256_type_found" = xyes ; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for library containing SHA256Init" >&5 +printf %s "checking for library containing SHA256Init... " >&6; } +if test ${ac_cv_search_SHA256Init+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. + The 'extern "C"' is for builds by C++ compilers; + although this is not generally supported in C code supporting it here + has little cost and some practical benefit (sr 110532). */ +#ifdef __cplusplus +extern "C" +#endif +char SHA256Init (void); +int +main (void) +{ +return SHA256Init (); + ; + return 0; +} +_ACEOF +for ac_lib in '' md +do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO" +then : + ac_cv_search_SHA256Init=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext + if test ${ac_cv_search_SHA256Init+y} +then : + break +fi +done +if test ${ac_cv_search_SHA256Init+y} +then : + +else case e in #( + e) ac_cv_search_SHA256Init=no ;; +esac +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_SHA256Init" >&5 +printf '%s\n' "$ac_cv_search_SHA256Init" >&6; } +ac_res=$ac_cv_search_SHA256Init +if test "$ac_res" != no +then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +fi + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for library containing SHA256_Init" >&5 +printf %s "checking for library containing SHA256_Init... " >&6; } +if test ${ac_cv_search_SHA256_Init+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. + The 'extern "C"' is for builds by C++ compilers; + although this is not generally supported in C code supporting it here + has little cost and some practical benefit (sr 110532). */ +#ifdef __cplusplus +extern "C" +#endif +char SHA256_Init (void); +int +main (void) +{ +return SHA256_Init (); + ; + return 0; +} +_ACEOF +for ac_lib in '' md +do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO" +then : + ac_cv_search_SHA256_Init=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext + if test ${ac_cv_search_SHA256_Init+y} +then : + break +fi +done +if test ${ac_cv_search_SHA256_Init+y} +then : + +else case e in #( + e) ac_cv_search_SHA256_Init=no ;; +esac +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_SHA256_Init" >&5 +printf '%s\n' "$ac_cv_search_SHA256_Init" >&6; } +ac_res=$ac_cv_search_SHA256_Init +if test "$ac_res" != no +then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +fi + + + for ac_func in CC_SHA256_Init SHA256Init SHA256_Init +do : + as_ac_var=`printf '%s\n' "ac_cv_func_$ac_func" | sed "$as_sed_sh"` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes" +then : + cat >>confdefs.h <<_ACEOF +#define `printf '%s\n' "HAVE_$ac_func" | sed "$as_sed_cpp"` 1 +_ACEOF + sha256_func_found=yes ; break +fi + +done + fi + fi + +fi + if test "x$sha256_func_found" = xno; then + COND_INTERNAL_SHA256_TRUE= + COND_INTERNAL_SHA256_FALSE='#' +else + COND_INTERNAL_SHA256_TRUE='#' + COND_INTERNAL_SHA256_FALSE= +fi + +if test "x$enable_external_sha256$sha256_func_found" = xyesno; then + as_fn_error $? "--enable-external-sha256 was specified but no supported external SHA-256 implementation was found" "$LINENO" 5 +fi + +# Check for SSE2 intrinsics. There is no run-time detection for SSE2 so if +# compiler options enable SSE2 then SSE2 support is required by the binaries. +# The compile-time check for SSE2 is done with #ifdefs because some compilers +# (ICC, MSVC) allow SSE2 intrinsics even when SSE2 isn't enabled. +ac_fn_check_decl "$LINENO" "_mm_movemask_epi8" "ac_cv_have_decl__mm_movemask_epi8" "#ifdef HAVE_IMMINTRIN_H +#include +#endif +" "$ac_c_undeclared_builtin_options$ac_c_future_darwin_options" "CFLAGS" +if test "x$ac_cv_have_decl__mm_movemask_epi8" = xyes +then : + +printf '%s\n' "#define HAVE__MM_MOVEMASK_EPI8 1" >>confdefs.h + +fi + +# For faster CRC on 32/64-bit x86 and E2K (see also crc64_fast.c): +# +# - Check for the CLMUL intrinsic _mm_clmulepi64_si128 in . +# Check also for _mm_set_epi64x for consistency with CMake build +# where it's needed to disable CLMUL with VS2013. +# +# - Check that __attribute__((__target__("ssse3,sse4.1,pclmul"))) works +# together with _mm_clmulepi64_si128 from . The attribute +# was added in GCC 4.4 but some GCC 4.x versions don't allow intrinsics +# with it. Exception: it must be not be used with EDG-based compilers +# like ICC and the compiler on E2K. +# +# If everything above is supported, runtime detection will be used to keep the +# binaries working on systems that don't support the required extensions. +# +# NOTE: Use a check that links and not merely compiles to ensure that +# missing intrinsics don't get accepted with compilers that allow +# implicit function declarations. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if _mm_clmulepi64_si128 is usable" >&5 +printf %s "checking if _mm_clmulepi64_si128 is usable... " >&6; } +if test "x$enable_clmul_crc" = xno +then : + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, --disable-clmul-crc was used" >&5 +printf '%s\n' "no, --disable-clmul-crc was used" >&6; } + +else case e in #( + e) + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include + +// CLMUL works on older E2K instruction set but it is slow due to emulation. +#if defined(__e2k__) && __iset__ < 6 +# error +#endif + +// Intel's old compiler (ICC) can define __GNUC__ but the attribute must not +// be used with it. The new Clang-based ICX needs the attribute. +// Checking for !defined(__EDG__) catches ICC and other EDG-based compilers. +#if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__) +__attribute__((__target__("ssse3,sse4.1,pclmul"))) +#endif +int main(void) +{ + __m128i a = _mm_set_epi64x(1, 2); + a = _mm_clmulepi64_si128(a, a, 0); + return 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + +printf '%s\n' "#define HAVE_USABLE_CLMUL 1" >>confdefs.h + + enable_clmul_crc=yes + +else case e in #( + e) + enable_clmul_crc=no + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_clmul_crc" >&5 +printf '%s\n' "$enable_clmul_crc" >&6; } + ;; +esac +fi + +# ARM64 C Language Extensions define CRC32 functions in arm_acle.h. +# These are supported by at least GCC and Clang which both need +# __attribute__((__target__("+crc"))), unless the needed compiler flags +# are used to support the CRC instruction. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if ARM64 CRC32 instruction is usable" >&5 +printf %s "checking if ARM64 CRC32 instruction is usable... " >&6; } +if test "x$enable_arm64_crc32" = xno +then : + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, --disable-arm64-crc32 was used" >&5 +printf '%s\n' "no, --disable-arm64-crc32 was used" >&6; } + +else case e in #( + e) + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +#if (defined(__GNUC__) || defined(__clang__)) && !defined(__EDG__) +__attribute__((__target__("+crc"))) +#endif +int main(void) +{ + return __crc32d(1, 2) != 0; +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + +printf '%s\n' "#define HAVE_ARM64_CRC32 1" >>confdefs.h + + enable_arm64_crc32=yes + +else case e in #( + e) + enable_arm64_crc32=no + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_arm64_crc32" >&5 +printf '%s\n' "$enable_arm64_crc32" >&6; } + ;; +esac +fi + +# Check for ARM64 CRC32 instruction runtime detection. +# +# - getauxval() is supported on Linux. +# +# - elf_aux_info() is supported on FreeBSD and OpenBSD >= 7.6. +# +# - sysctlbyname("hw.optional.armv8_crc32", ...) is supported on Darwin +# (macOS, iOS, etc.). Note that sysctlbyname() is supported on FreeBSD, +# NetBSD, and possibly others too but the string is specific to Apple +# OSes. The C code is responsible for checking defined(__APPLE__) +# before using sysctlbyname("hw.optional.armv8_crc32", ...). +# +if test "x$enable_arm64_crc32" = xyes +then : + + + for ac_func in getauxval elf_aux_info sysctlbyname +do : + as_ac_var=`printf '%s\n' "ac_cv_func_$ac_func" | sed "$as_sed_sh"` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes" +then : + cat >>confdefs.h <<_ACEOF +#define `printf '%s\n' "HAVE_$ac_func" | sed "$as_sed_cpp"` 1 +_ACEOF + break +fi + +done + +fi + + +# LoongArch CRC32 intrinsics are in larchintrin.h. +# These are supported by at least GCC and Clang. +# +# Only 64-bit LoongArch is currently supported. +# It doesn't need runtime detection. +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if LoongArch CRC32 instructions are usable" >&5 +printf %s "checking if LoongArch CRC32 instructions are usable... " >&6; } +if test "x$enable_loongarch_crc32" = xno +then : + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no, --disable-loongarch-crc32 was used" >&5 +printf '%s\n' "no, --disable-loongarch-crc32 was used" >&6; } + +else case e in #( + e) + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#if !(defined(__loongarch__) && __loongarch_grlen >= 64) +# error +#endif + +#include +int main(void) +{ + return __crc_w_w_w(1, 2); +} + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + +printf '%s\n' "#define HAVE_LOONGARCH_CRC32 1" >>confdefs.h + + enable_loongarch_crc32=yes + +else case e in #( + e) + enable_loongarch_crc32=no + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $enable_loongarch_crc32" >&5 +printf '%s\n' "$enable_loongarch_crc32" >&6; } + ;; +esac +fi + + +# Check for sandbox support. If one is found, set enable_sandbox=found. +# +# About -fsanitize: Of our three sandbox methods, only Landlock is +# incompatible with -fsanitize. FreeBSD 13.2 with Capsicum was tested with +# -fsanitize=address,undefined and had no issues. OpenBSD (as of version +# 7.4) has minimal support for process instrumentation. OpenBSD does not +# distribute the additional libraries needed (libasan, libubsan, etc.) with +# GCC or Clang needed for runtime sanitization support and instead only +# support -fsanitize-minimal-runtime for minimal undefined behavior +# sanitization. This minimal support is compatible with our use of the +# Pledge sandbox. So only Landlock will result in a build that cannot +# compress or decompress a single file to standard out. +case $enable_sandbox in #( + auto | capsicum) : + + + for ac_func in cap_rights_limit +do : + ac_fn_c_check_func "$LINENO" "cap_rights_limit" "ac_cv_func_cap_rights_limit" +if test "x$ac_cv_func_cap_rights_limit" = xyes +then : + printf '%s\n' "#define HAVE_CAP_RIGHTS_LIMIT 1" >>confdefs.h + enable_sandbox=found +fi + +done + + ;; #( + *) : + ;; +esac +case $enable_sandbox in #( + auto | pledge) : + + + for ac_func in pledge +do : + ac_fn_c_check_func "$LINENO" "pledge" "ac_cv_func_pledge" +if test "x$ac_cv_func_pledge" = xyes +then : + printf '%s\n' "#define HAVE_PLEDGE 1" >>confdefs.h + enable_sandbox=found +fi + +done + + ;; #( + *) : + ;; +esac +case $enable_sandbox in #( + auto | landlock) : + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking if Linux Landlock is usable" >&5 +printf %s "checking if Linux Landlock is usable... " >&6; } + + # A compile check is done here because some systems have + # linux/landlock.h, but do not have the syscalls defined + # in order to actually use Linux Landlock. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #include + #include + #include + + int main(void) + { + (void)prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0); + (void)SYS_landlock_create_ruleset; + (void)SYS_landlock_restrict_self; + (void)LANDLOCK_CREATE_RULESET_VERSION; + return 0; + } + +_ACEOF +if ac_fn_c_try_link "$LINENO" +then : + + enable_sandbox=found + + case "$CC $CFLAGS" in #( + *-fsanitize=*) : + as_fn_error $? " + CC or CFLAGS contain '-fsanitize=' which is incompatible with the Landlock + sandboxing. Use --disable-sandbox when using '-fsanitize'." "$LINENO" 5 ;; #( + *) : + ;; +esac + + +printf '%s\n' "#define HAVE_LINUX_LANDLOCK 1" >>confdefs.h + + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +printf '%s\n' "yes" >&6; } + +else case e in #( + e) + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: no" >&5 +printf '%s\n' "no" >&6; } + ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam \ + conftest$ac_exeext conftest.$ac_ext + + ;; #( + *) : + ;; +esac + +# If a specific sandboxing method was explicitly requested and it wasn't +# found, give an error. +case $enable_sandbox in + auto | no | found) + ;; + *) + as_fn_error $? "$enable_sandbox support not found" "$LINENO" 5 + ;; +esac + + +############################################################################### +# If using GCC, set some additional AM_CFLAGS: +############################################################################### + +if test "$GCC" = yes ; then + echo + echo "GCC extensions:" +fi + +# Always do the visibility check but don't set AM_CFLAGS on Windows. +# This way things get set properly even on Windows. + + + CFLAG_VISIBILITY= + HAVE_VISIBILITY=0 + if test -n "$GCC"; then + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking whether the -Werror option is usable" >&5 +printf %s "checking whether the -Werror option is usable... " >&6; } +if test ${gl_cv_cc_vis_werror+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) gl_saved_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -Werror" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + gl_cv_cc_vis_werror=yes +else case e in #( + e) gl_cv_cc_vis_werror=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + CFLAGS="$gl_saved_CFLAGS" + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gl_cv_cc_vis_werror" >&5 +printf '%s\n' "$gl_cv_cc_vis_werror" >&6; } + { printf '%s\n' "$as_me:${as_lineno-$LINENO}: checking for simple visibility declarations" >&5 +printf %s "checking for simple visibility declarations... " >&6; } +if test ${gl_cv_cc_visibility+y} +then : + printf %s "(cached) " >&6 +else case e in #( + e) gl_saved_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fvisibility=hidden" + if test $gl_cv_cc_vis_werror = yes; then + CFLAGS="$CFLAGS -Werror" + fi + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +extern __attribute__((__visibility__("hidden"))) int hiddenvar; + extern __attribute__((__visibility__("default"))) int exportedvar; + extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void); + extern __attribute__((__visibility__("default"))) int exportedfunc (void); + void dummyfunc (void); + int hiddenvar; + int exportedvar; + int hiddenfunc (void) { return 51; } + int exportedfunc (void) { return 1225736919; } + void dummyfunc (void) {} + +int +main (void) +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO" +then : + gl_cv_cc_visibility=yes +else case e in #( + e) gl_cv_cc_visibility=no ;; +esac +fi +rm -f core conftest.err conftest.$ac_objext conftest.beam conftest.$ac_ext + CFLAGS="$gl_saved_CFLAGS" + ;; +esac +fi +{ printf '%s\n' "$as_me:${as_lineno-$LINENO}: result: $gl_cv_cc_visibility" >&5 +printf '%s\n' "$gl_cv_cc_visibility" >&6; } + if test $gl_cv_cc_visibility = yes; then + CFLAG_VISIBILITY="-fvisibility=hidden" + HAVE_VISIBILITY=1 + fi + fi + + + +printf '%s\n' "#define HAVE_VISIBILITY $HAVE_VISIBILITY" >>confdefs.h + + if test -n "$CFLAG_VISIBILITY" && test "$is_w32" = no; then AM_CFLAGS="$AM_CFLAGS $CFLAG_VISIBILITY" fi diff --git a/xz-clib.cabal b/xz-clib.cabal --- a/xz-clib.cabal +++ b/xz-clib.cabal @@ -1,6 +1,6 @@ cabal-version: 2.2 name: xz-clib -version: 5.8.3 +version: 5.8.4 synopsis: LZMA/XZ clibs description: C source code for the LZMA/XZ compression and decompression library