xmms2-client 0.0.3.8 → 0.0.3.9
raw patch · 14 files changed
+3285/−3 lines, 14 files
Files
- Makefile.in +47/−0
- aclocal.m4 +171/−0
- configure +3014/−0
- configure.ac +25/−0
- src/Control/Makefile.in +1/−0
- src/Control/Monad/Makefile.in +1/−0
- src/Makefile.in +1/−0
- src/XMMS2/Client/Bindings/Makefile.in +1/−0
- src/XMMS2/Client/Bindings/Types/Makefile.in +1/−0
- src/XMMS2/Client/Makefile.in +1/−0
- src/XMMS2/Client/Types/Makefile.in +1/−0
- src/XMMS2/Makefile.in +1/−0
- xmms2-client.buildinfo.in +3/−0
- xmms2-client.cabal +17/−3
+ Makefile.in view
@@ -0,0 +1,47 @@+CABAL_FILE := xmms2-client.cabal++ABS_TOP_SRCDIR := @abs_top_srcdir@+ifeq ($(ABS_TOP_SRCDIR),$(shell pwd))+all-dev: build register-inplace++build: configure-dev+ ./Setup.hs build++register-inplace:+ ./Setup.hs register --user --inplace++configure-dev: config.status++config.status: $(CABAL_FILE) configure+ ./Setup.hs configure --user++configure: configure.ac+ autoconf++doc:+ ./Setup.hs haddock++clean:+ ./Setup.hs clean++lint:+ rm -f hlint.out+ -find ./src/ -type f -name "*.hs" -exec hlint {} \; | \+ grep -v '^No suggestions$$' >> hlint.out++.PHONY: all-dev build configure-dev register-inplace doc clean lint+else+all-dev:+ $(MAKE) -C $(ABS_TOP_SRCDIR) $@++doc:+ $(MAKE) -C $(ABS_TOP_SRCDIR) $@++clean:+ $(MAKE) -C $(ABS_TOP_SRCDIR) $@++lint:+ $(MAKE) -C $(ABS_TOP_SRCDIR) $@++.PHONY: all-dev doc clean lint+endif
+ aclocal.m4 view
@@ -0,0 +1,171 @@+# generated automatically by aclocal 1.10.2 -*- Autoconf -*-++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,+# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.+# This file is free software; the Free Software Foundation+# gives unlimited permission to copy and/or distribute it,+# with or without modifications, as long as this notice is preserved.++# This program is distributed in the hope that it will be useful,+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A+# PARTICULAR PURPOSE.++# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-+# +# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.+#+# This program is free software; you can redistribute it and/or modify+# it under the terms of the GNU General Public License as published by+# the Free Software Foundation; either version 2 of the License, or+# (at your option) any later version.+#+# This program is distributed in the hope that it will be useful, but+# WITHOUT ANY WARRANTY; without even the implied warranty of+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU+# General Public License for more details.+#+# You should have received a copy of the GNU General Public License+# along with this program; if not, write to the Free Software+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.+#+# As a special exception to the GNU General Public License, if you+# distribute this file as part of a program that contains a+# configuration script generated by Autoconf, you may include it under+# the same distribution terms that you use for the rest of that program.++# PKG_PROG_PKG_CONFIG([MIN-VERSION])+# ----------------------------------+AC_DEFUN([PKG_PROG_PKG_CONFIG],+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])+m4_pattern_allow([^PKG_CONFIG(_PATH)?$])+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then+ AC_PATH_TOOL([PKG_CONFIG], [pkg-config])+fi+if test -n "$PKG_CONFIG"; then+ _pkg_min_version=m4_default([$1], [0.9.0])+ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then+ AC_MSG_RESULT([yes])+ else+ AC_MSG_RESULT([no])+ PKG_CONFIG=""+ fi+ +fi[]dnl+])# PKG_PROG_PKG_CONFIG++# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])+#+# Check to see whether a particular set of modules exists. Similar+# to PKG_CHECK_MODULES(), but does not set variables or print errors.+#+#+# Similar to PKG_CHECK_MODULES, make sure that the first instance of+# this or PKG_CHECK_MODULES is called, or make sure to call+# PKG_CHECK_EXISTS manually+# --------------------------------------------------------------+AC_DEFUN([PKG_CHECK_EXISTS],+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl+if test -n "$PKG_CONFIG" && \+ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then+ m4_ifval([$2], [$2], [:])+m4_ifvaln([$3], [else+ $3])dnl+fi])+++# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])+# ---------------------------------------------+m4_define([_PKG_CONFIG],+[if test -n "$PKG_CONFIG"; then+ if test -n "$$1"; then+ pkg_cv_[]$1="$$1"+ else+ PKG_CHECK_EXISTS([$3],+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],+ [pkg_failed=yes])+ fi+else+ pkg_failed=untried+fi[]dnl+])# _PKG_CONFIG++# _PKG_SHORT_ERRORS_SUPPORTED+# -----------------------------+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then+ _pkg_short_errors_supported=yes+else+ _pkg_short_errors_supported=no+fi[]dnl+])# _PKG_SHORT_ERRORS_SUPPORTED+++# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],+# [ACTION-IF-NOT-FOUND])+#+#+# Note that if there is a possibility the first call to+# PKG_CHECK_MODULES might not happen, you should be sure to include an+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac+#+#+# --------------------------------------------------------------+AC_DEFUN([PKG_CHECK_MODULES],+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl++pkg_failed=no+AC_MSG_CHECKING([for $1])++_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])+_PKG_CONFIG([$1][_LIBS], [libs], [$2])++m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS+and $1[]_LIBS to avoid the need to call pkg-config.+See the pkg-config man page for more details.])++if test $pkg_failed = yes; then+ _PKG_SHORT_ERRORS_SUPPORTED+ if test $_pkg_short_errors_supported = yes; then+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"`+ else + $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`+ fi+ # Put the nasty error message in config.log where it belongs+ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD++ ifelse([$4], , [AC_MSG_ERROR(dnl+[Package requirements ($2) were not met:++$$1_PKG_ERRORS++Consider adjusting the PKG_CONFIG_PATH environment variable if you+installed software in a non-standard prefix.++_PKG_TEXT+])],+ [AC_MSG_RESULT([no])+ $4])+elif test $pkg_failed = untried; then+ ifelse([$4], , [AC_MSG_FAILURE(dnl+[The pkg-config script could not be found or is too old. Make sure it+is in your PATH or set the PKG_CONFIG environment variable to the full+path to pkg-config.++_PKG_TEXT++To get pkg-config, see <http://pkg-config.freedesktop.org/>.])],+ [$4])+else+ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS+ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS+ AC_MSG_RESULT([yes])+ ifelse([$3], , :, [$3])+fi[]dnl+])# PKG_CHECK_MODULES+
+ configure view
@@ -0,0 +1,3014 @@+#! /bin/sh+# Guess values for system-dependent variables and create Makefiles.+# Generated by GNU Autoconf 2.65 for xmms2-client 0.0.2.0.+#+# Report bugs to <upwawet@gmail.com>.+#+#+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,+# Inc.+#+#+# This configure script is free software; the Free Software Foundation+# gives unlimited permission to copy, distribute and modify it.+## -------------------- ##+## M4sh Initialization. ##+## -------------------- ##++# Be more Bourne compatible+DUALCASE=1; export DUALCASE # for MKS sh+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :+ emulate sh+ NULLCMD=:+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which+ # is contrary to our usage. Disable this feature.+ alias -g '${1+"$@"}'='"$@"'+ setopt NO_GLOB_SUBST+else+ case `(set -o) 2>/dev/null` in #(+ *posix*) :+ set -o posix ;; #(+ *) :+ ;;+esac+fi+++as_nl='+'+export as_nl+# Printing a long string crashes Solaris 7 /usr/bin/printf.+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo+# Prefer a ksh shell builtin over an external printf program on Solaris,+# but without wasting forks for bash or zsh.+if test -z "$BASH_VERSION$ZSH_VERSION" \+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then+ as_echo='print -r --'+ as_echo_n='print -rn --'+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then+ as_echo='printf %s\n'+ as_echo_n='printf %s'+else+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'+ as_echo_n='/usr/ucb/echo -n'+ else+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'+ as_echo_n_body='eval+ arg=$1;+ case $arg in #(+ *"$as_nl"*)+ expr "X$arg" : "X\\(.*\\)$as_nl";+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;+ esac;+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"+ '+ export as_echo_n_body+ as_echo_n='sh -c $as_echo_n_body as_echo'+ fi+ export as_echo_body+ as_echo='sh -c $as_echo_body as_echo'+fi++# The user is always right.+if test "${PATH_SEPARATOR+set}" != set; then+ PATH_SEPARATOR=:+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||+ PATH_SEPARATOR=';'+ }+fi+++# IFS+# We need space, tab and new line, in precisely that order. Quoting is+# there to prevent editors from complaining about space-tab.+# (If _AS_PATH_WALK were called with IFS unset, it would disable word+# splitting by setting IFS to empty value.)+IFS=" "" $as_nl"++# Find who we are. Look in the path if we contain no directory separator.+case $0 in #((+ *[\\/]* ) as_myself=$0 ;;+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break+ done+IFS=$as_save_IFS++ ;;+esac+# We did not find ourselves, most probably we were run as `sh COMMAND'+# in which case we are not to be found in the path.+if test "x$as_myself" = x; then+ as_myself=$0+fi+if test ! -f "$as_myself"; then+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2+ exit 1+fi++# Unset variables that we do not need and which cause bugs (e.g. in+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"+# suppresses any "Segmentation fault" message there. '((' could+# trigger a bug in pdksh 5.2.14.+for as_var in BASH_ENV ENV MAIL MAILPATH+do eval test x\${$as_var+set} = xset \+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :+done+PS1='$ '+PS2='> '+PS4='+ '++# NLS nuisances.+LC_ALL=C+export LC_ALL+LANGUAGE=C+export LANGUAGE++# CDPATH.+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH++if test "x$CONFIG_SHELL" = x; then+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :+ emulate sh+ NULLCMD=:+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which+ # is contrary to our usage. Disable this feature.+ alias -g '\${1+\"\$@\"}'='\"\$@\"'+ setopt NO_GLOB_SUBST+else+ case \`(set -o) 2>/dev/null\` in #(+ *posix*) :+ set -o posix ;; #(+ *) :+ ;;+esac+fi+"+ as_required="as_fn_return () { (exit \$1); }+as_fn_success () { as_fn_return 0; }+as_fn_failure () { as_fn_return 1; }+as_fn_ret_success () { return 0; }+as_fn_ret_failure () { return 1; }++exitcode=0+as_fn_success || { exitcode=1; echo as_fn_success failed.; }+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :++else+ exitcode=1; echo positional parameters were not saved.+fi+test x\$exitcode = x0 || exit 1"+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"+ if (eval "$as_required") 2>/dev/null; then :+ as_have_required=yes+else+ as_have_required=no+fi+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :++else+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+as_found=false+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ as_found=:+ case $as_dir in #(+ /*)+ for as_base in sh bash ksh sh5; do+ # Try only shells that exist, to save several forks.+ as_shell=$as_dir/$as_base+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :+ CONFIG_SHELL=$as_shell as_have_required=yes+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :+ break 2+fi+fi+ done;;+ esac+ as_found=false+done+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :+ CONFIG_SHELL=$SHELL as_have_required=yes+fi; }+IFS=$as_save_IFS+++ if test "x$CONFIG_SHELL" != x; then :+ # We cannot yet assume a decent shell, so we have to provide a+ # neutralization value for shells without unset; and this also+ # works around shells that cannot unset nonexistent variables.+ BASH_ENV=/dev/null+ ENV=/dev/null+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV+ export CONFIG_SHELL+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}+fi++ if test x$as_have_required = xno; then :+ $as_echo "$0: This script requires a shell more modern than all"+ $as_echo "$0: the shells that I found on your system."+ if test x${ZSH_VERSION+set} = xset ; then+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."+ else+ $as_echo "$0: Please tell bug-autoconf@gnu.org and upwawet@gmail.com+$0: about your system, including any error possibly output+$0: before this message. Then install a modern shell, or+$0: manually run the script under such a shell if you do+$0: have one."+ fi+ exit 1+fi+fi+fi+SHELL=${CONFIG_SHELL-/bin/sh}+export SHELL+# Unset more variables known to interfere with behavior of common tools.+CLICOLOR_FORCE= GREP_OPTIONS=+unset CLICOLOR_FORCE GREP_OPTIONS++## --------------------- ##+## M4sh Shell Functions. ##+## --------------------- ##+# as_fn_unset VAR+# ---------------+# Portably unset VAR.+as_fn_unset ()+{+ { eval $1=; unset $1;}+}+as_unset=as_fn_unset++# as_fn_set_status STATUS+# -----------------------+# Set $? to STATUS, without forking.+as_fn_set_status ()+{+ return $1+} # as_fn_set_status++# as_fn_exit STATUS+# -----------------+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.+as_fn_exit ()+{+ set +e+ as_fn_set_status $1+ exit $1+} # as_fn_exit++# as_fn_mkdir_p+# -------------+# Create "$as_dir" as a directory, including parents if necessary.+as_fn_mkdir_p ()+{++ case $as_dir in #(+ -*) as_dir=./$as_dir;;+ esac+ test -d "$as_dir" || eval $as_mkdir_p || {+ as_dirs=+ while :; do+ case $as_dir in #(+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(+ *) as_qdir=$as_dir;;+ esac+ as_dirs="'$as_qdir' $as_dirs"+ as_dir=`$as_dirname -- "$as_dir" ||+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \+ X"$as_dir" : 'X\(//\)[^/]' \| \+ X"$as_dir" : 'X\(//\)$' \| \+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||+$as_echo X"$as_dir" |+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{+ s//\1/+ q+ }+ /^X\(\/\/\)[^/].*/{+ s//\1/+ q+ }+ /^X\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`+ test -d "$as_dir" && break+ done+ test -z "$as_dirs" || eval "mkdir $as_dirs"+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"+++} # as_fn_mkdir_p+# as_fn_append VAR VALUE+# ----------------------+# Append the text in VALUE to the end of the definition contained in VAR. Take+# advantage of any shell optimizations that allow amortized linear growth over+# repeated appends, instead of the typical quadratic growth present in naive+# implementations.+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :+ eval 'as_fn_append ()+ {+ eval $1+=\$2+ }'+else+ as_fn_append ()+ {+ eval $1=\$$1\$2+ }+fi # as_fn_append++# as_fn_arith ARG...+# ------------------+# Perform arithmetic evaluation on the ARGs, and store the result in the+# global $as_val. Take advantage of shells that can avoid forks. The arguments+# must be portable across $(()) and expr.+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :+ eval 'as_fn_arith ()+ {+ as_val=$(( $* ))+ }'+else+ as_fn_arith ()+ {+ as_val=`expr "$@" || test $? -eq 1`+ }+fi # as_fn_arith+++# as_fn_error ERROR [LINENO LOG_FD]+# ---------------------------------+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the+# script with status $?, using 1 if that was 0.+as_fn_error ()+{+ as_status=$?; test $as_status -eq 0 && as_status=1+ if test "$3"; then+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3+ fi+ $as_echo "$as_me: error: $1" >&2+ as_fn_exit $as_status+} # as_fn_error++if expr a : '\(a\)' >/dev/null 2>&1 &&+ test "X`expr 00001 : '.*\(...\)'`" = X001; then+ as_expr=expr+else+ as_expr=false+fi++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then+ as_basename=basename+else+ as_basename=false+fi++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then+ as_dirname=dirname+else+ as_dirname=false+fi++as_me=`$as_basename -- "$0" ||+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \+ X"$0" : 'X\(//\)$' \| \+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||+$as_echo X/"$0" |+ sed '/^.*\/\([^/][^/]*\)\/*$/{+ s//\1/+ q+ }+ /^X\/\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\/\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`++# Avoid depending upon Character Ranges.+as_cr_letters='abcdefghijklmnopqrstuvwxyz'+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'+as_cr_Letters=$as_cr_letters$as_cr_LETTERS+as_cr_digits='0123456789'+as_cr_alnum=$as_cr_Letters$as_cr_digits+++ as_lineno_1=$LINENO as_lineno_1a=$LINENO+ as_lineno_2=$LINENO as_lineno_2a=$LINENO+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)+ sed -n '+ p+ /[$]LINENO/=+ ' <$as_myself |+ sed '+ s/[$]LINENO.*/&-/+ t lineno+ b+ :lineno+ N+ :loop+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/+ t loop+ s/-\n.*//+ ' >$as_me.lineno &&+ chmod +x "$as_me.lineno" ||+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }++ # Don't try to exec as it changes $[0], causing all sort of problems+ # (the dirname of $[0] is not the place where we might find the+ # original and so on. Autoconf is especially sensitive to this).+ . "./$as_me.lineno"+ # Exit status is that of the last command.+ exit+}++ECHO_C= ECHO_N= ECHO_T=+case `echo -n x` in #(((((+-n*)+ case `echo 'xy\c'` in+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.+ xy) ECHO_C='\c';;+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null+ ECHO_T=' ';;+ esac;;+*)+ ECHO_N='-n';;+esac++rm -f conf$$ conf$$.exe conf$$.file+if test -d conf$$.dir; then+ rm -f conf$$.dir/conf$$.file+else+ rm -f conf$$.dir+ mkdir conf$$.dir 2>/dev/null+fi+if (echo >conf$$.file) 2>/dev/null; then+ if ln -s conf$$.file conf$$ 2>/dev/null; then+ as_ln_s='ln -s'+ # ... but there are two gotchas:+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.+ # In both cases, we have to default to `cp -p'.+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||+ as_ln_s='cp -p'+ elif ln conf$$.file conf$$ 2>/dev/null; then+ as_ln_s=ln+ else+ as_ln_s='cp -p'+ fi+else+ as_ln_s='cp -p'+fi+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file+rmdir conf$$.dir 2>/dev/null++if mkdir -p . 2>/dev/null; then+ as_mkdir_p='mkdir -p "$as_dir"'+else+ test -d ./-p && rmdir ./-p+ as_mkdir_p=false+fi++if test -x / >/dev/null 2>&1; then+ as_test_x='test -x'+else+ if ls -dL / >/dev/null 2>&1; then+ as_ls_L_option=L+ else+ as_ls_L_option=+ fi+ as_test_x='+ eval sh -c '\''+ if test -d "$1"; then+ test -d "$1/.";+ else+ case $1 in #(+ -*)set "./$1";;+ esac;+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((+ ???[sx]*):;;*)false;;esac;fi+ '\'' sh+ '+fi+as_executable_p=$as_test_x++# Sed expression to map a string onto a valid CPP name.+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"++# Sed expression to map a string onto a valid variable name.+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"+++test -n "$DJDIR" || exec 7<&0 </dev/null+exec 6>&1++# Name of the host.+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,+# so uname gets run too.+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`++#+# Initializations.+#+ac_default_prefix=/usr/local+ac_clean_files=+ac_config_libobj_dir=.+LIBOBJS=+cross_compiling=no+subdirs=+MFLAGS=+MAKEFLAGS=++# Identity of this package.+PACKAGE_NAME='xmms2-client'+PACKAGE_TARNAME='xmms2-client'+PACKAGE_VERSION='0.0.2.0'+PACKAGE_STRING='xmms2-client 0.0.2.0'+PACKAGE_BUGREPORT='upwawet@gmail.com'+PACKAGE_URL=''++ac_unique_file="xmms2-client.cabal"+ac_subst_vars='LTLIBOBJS+LIBOBJS+BUILD_PACKAGE_BOOL+XMMS2_CLIENT_LIBS+XMMS2_CLIENT_CFLAGS+PKG_CONFIG+target_alias+host_alias+build_alias+LIBS+ECHO_T+ECHO_N+ECHO_C+DEFS+mandir+localedir+libdir+psdir+pdfdir+dvidir+htmldir+infodir+docdir+oldincludedir+includedir+localstatedir+sharedstatedir+sysconfdir+datadir+datarootdir+libexecdir+sbindir+bindir+program_transform_name+prefix+exec_prefix+PACKAGE_URL+PACKAGE_BUGREPORT+PACKAGE_STRING+PACKAGE_VERSION+PACKAGE_TARNAME+PACKAGE_NAME+PATH_SEPARATOR+SHELL'+ac_subst_files=''+ac_user_opts='+enable_option_checking+with_compiler+'+ ac_precious_vars='build_alias+host_alias+target_alias+PKG_CONFIG+XMMS2_CLIENT_CFLAGS+XMMS2_CLIENT_LIBS'+++# Initialize some variables set by options.+ac_init_help=+ac_init_version=false+ac_unrecognized_opts=+ac_unrecognized_sep=+# The variables have the same names as the options, with+# dashes changed to underlines.+cache_file=/dev/null+exec_prefix=NONE+no_create=+no_recursion=+prefix=NONE+program_prefix=NONE+program_suffix=NONE+program_transform_name=s,x,x,+silent=+site=+srcdir=+verbose=+x_includes=NONE+x_libraries=NONE++# Installation directory options.+# These are left unexpanded so users can "make install exec_prefix=/foo"+# and all the variables that are supposed to be based on exec_prefix+# by default will actually change.+# Use braces instead of parens because sh, perl, etc. also accept them.+# (The list follows the same order as the GNU Coding Standards.)+bindir='${exec_prefix}/bin'+sbindir='${exec_prefix}/sbin'+libexecdir='${exec_prefix}/libexec'+datarootdir='${prefix}/share'+datadir='${datarootdir}'+sysconfdir='${prefix}/etc'+sharedstatedir='${prefix}/com'+localstatedir='${prefix}/var'+includedir='${prefix}/include'+oldincludedir='/usr/include'+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'+infodir='${datarootdir}/info'+htmldir='${docdir}'+dvidir='${docdir}'+pdfdir='${docdir}'+psdir='${docdir}'+libdir='${exec_prefix}/lib'+localedir='${datarootdir}/locale'+mandir='${datarootdir}/man'++ac_prev=+ac_dashdash=+for ac_option+do+ # If the previous option needs an argument, assign it.+ if test -n "$ac_prev"; then+ eval $ac_prev=\$ac_option+ ac_prev=+ continue+ fi++ case $ac_option in+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;+ *) ac_optarg=yes ;;+ esac++ # Accept the important Cygnus configure options, so we can diagnose typos.++ case $ac_dashdash$ac_option in+ --)+ ac_dashdash=yes ;;++ -bindir | --bindir | --bindi | --bind | --bin | --bi)+ ac_prev=bindir ;;+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)+ bindir=$ac_optarg ;;++ -build | --build | --buil | --bui | --bu)+ ac_prev=build_alias ;;+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)+ build_alias=$ac_optarg ;;++ -cache-file | --cache-file | --cache-fil | --cache-fi \+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)+ ac_prev=cache_file ;;+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)+ cache_file=$ac_optarg ;;++ --config-cache | -C)+ cache_file=config.cache ;;++ -datadir | --datadir | --datadi | --datad)+ ac_prev=datadir ;;+ -datadir=* | --datadir=* | --datadi=* | --datad=*)+ datadir=$ac_optarg ;;++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \+ | --dataroo | --dataro | --datar)+ ac_prev=datarootdir ;;+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)+ datarootdir=$ac_optarg ;;++ -disable-* | --disable-*)+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`+ # Reject names that are not valid shell variable names.+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&+ as_fn_error "invalid feature name: $ac_useropt"+ ac_useropt_orig=$ac_useropt+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`+ case $ac_user_opts in+ *"+"enable_$ac_useropt"+"*) ;;+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"+ ac_unrecognized_sep=', ';;+ esac+ eval enable_$ac_useropt=no ;;++ -docdir | --docdir | --docdi | --doc | --do)+ ac_prev=docdir ;;+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)+ docdir=$ac_optarg ;;++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)+ ac_prev=dvidir ;;+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)+ dvidir=$ac_optarg ;;++ -enable-* | --enable-*)+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`+ # Reject names that are not valid shell variable names.+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&+ as_fn_error "invalid feature name: $ac_useropt"+ ac_useropt_orig=$ac_useropt+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`+ case $ac_user_opts in+ *"+"enable_$ac_useropt"+"*) ;;+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"+ ac_unrecognized_sep=', ';;+ esac+ eval enable_$ac_useropt=\$ac_optarg ;;++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \+ | --exec | --exe | --ex)+ ac_prev=exec_prefix ;;+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \+ | --exec=* | --exe=* | --ex=*)+ exec_prefix=$ac_optarg ;;++ -gas | --gas | --ga | --g)+ # Obsolete; use --with-gas.+ with_gas=yes ;;++ -help | --help | --hel | --he | -h)+ ac_init_help=long ;;+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)+ ac_init_help=recursive ;;+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)+ ac_init_help=short ;;++ -host | --host | --hos | --ho)+ ac_prev=host_alias ;;+ -host=* | --host=* | --hos=* | --ho=*)+ host_alias=$ac_optarg ;;++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)+ ac_prev=htmldir ;;+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \+ | --ht=*)+ htmldir=$ac_optarg ;;++ -includedir | --includedir | --includedi | --included | --include \+ | --includ | --inclu | --incl | --inc)+ ac_prev=includedir ;;+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \+ | --includ=* | --inclu=* | --incl=* | --inc=*)+ includedir=$ac_optarg ;;++ -infodir | --infodir | --infodi | --infod | --info | --inf)+ ac_prev=infodir ;;+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)+ infodir=$ac_optarg ;;++ -libdir | --libdir | --libdi | --libd)+ ac_prev=libdir ;;+ -libdir=* | --libdir=* | --libdi=* | --libd=*)+ libdir=$ac_optarg ;;++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \+ | --libexe | --libex | --libe)+ ac_prev=libexecdir ;;+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \+ | --libexe=* | --libex=* | --libe=*)+ libexecdir=$ac_optarg ;;++ -localedir | --localedir | --localedi | --localed | --locale)+ ac_prev=localedir ;;+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)+ localedir=$ac_optarg ;;++ -localstatedir | --localstatedir | --localstatedi | --localstated \+ | --localstate | --localstat | --localsta | --localst | --locals)+ ac_prev=localstatedir ;;+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)+ localstatedir=$ac_optarg ;;++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)+ ac_prev=mandir ;;+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)+ mandir=$ac_optarg ;;++ -nfp | --nfp | --nf)+ # Obsolete; use --without-fp.+ with_fp=no ;;++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \+ | --no-cr | --no-c | -n)+ no_create=yes ;;++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)+ no_recursion=yes ;;++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \+ | --oldin | --oldi | --old | --ol | --o)+ ac_prev=oldincludedir ;;+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)+ oldincludedir=$ac_optarg ;;++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)+ ac_prev=prefix ;;+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)+ prefix=$ac_optarg ;;++ -program-prefix | --program-prefix | --program-prefi | --program-pref \+ | --program-pre | --program-pr | --program-p)+ ac_prev=program_prefix ;;+ -program-prefix=* | --program-prefix=* | --program-prefi=* \+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)+ program_prefix=$ac_optarg ;;++ -program-suffix | --program-suffix | --program-suffi | --program-suff \+ | --program-suf | --program-su | --program-s)+ ac_prev=program_suffix ;;+ -program-suffix=* | --program-suffix=* | --program-suffi=* \+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)+ program_suffix=$ac_optarg ;;++ -program-transform-name | --program-transform-name \+ | --program-transform-nam | --program-transform-na \+ | --program-transform-n | --program-transform- \+ | --program-transform | --program-transfor \+ | --program-transfo | --program-transf \+ | --program-trans | --program-tran \+ | --progr-tra | --program-tr | --program-t)+ ac_prev=program_transform_name ;;+ -program-transform-name=* | --program-transform-name=* \+ | --program-transform-nam=* | --program-transform-na=* \+ | --program-transform-n=* | --program-transform-=* \+ | --program-transform=* | --program-transfor=* \+ | --program-transfo=* | --program-transf=* \+ | --program-trans=* | --program-tran=* \+ | --progr-tra=* | --program-tr=* | --program-t=*)+ program_transform_name=$ac_optarg ;;++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)+ ac_prev=pdfdir ;;+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)+ pdfdir=$ac_optarg ;;++ -psdir | --psdir | --psdi | --psd | --ps)+ ac_prev=psdir ;;+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)+ psdir=$ac_optarg ;;++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \+ | -silent | --silent | --silen | --sile | --sil)+ silent=yes ;;++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)+ ac_prev=sbindir ;;+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \+ | --sbi=* | --sb=*)+ sbindir=$ac_optarg ;;++ -sharedstatedir | --sharedstatedir | --sharedstatedi \+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \+ | --sharedst | --shareds | --shared | --share | --shar \+ | --sha | --sh)+ ac_prev=sharedstatedir ;;+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \+ | --sha=* | --sh=*)+ sharedstatedir=$ac_optarg ;;++ -site | --site | --sit)+ ac_prev=site ;;+ -site=* | --site=* | --sit=*)+ site=$ac_optarg ;;++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)+ ac_prev=srcdir ;;+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)+ srcdir=$ac_optarg ;;++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \+ | --syscon | --sysco | --sysc | --sys | --sy)+ ac_prev=sysconfdir ;;+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)+ sysconfdir=$ac_optarg ;;++ -target | --target | --targe | --targ | --tar | --ta | --t)+ ac_prev=target_alias ;;+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)+ target_alias=$ac_optarg ;;++ -v | -verbose | --verbose | --verbos | --verbo | --verb)+ verbose=yes ;;++ -version | --version | --versio | --versi | --vers | -V)+ ac_init_version=: ;;++ -with-* | --with-*)+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`+ # Reject names that are not valid shell variable names.+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&+ as_fn_error "invalid package name: $ac_useropt"+ ac_useropt_orig=$ac_useropt+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`+ case $ac_user_opts in+ *"+"with_$ac_useropt"+"*) ;;+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"+ ac_unrecognized_sep=', ';;+ esac+ eval with_$ac_useropt=\$ac_optarg ;;++ -without-* | --without-*)+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`+ # Reject names that are not valid shell variable names.+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&+ as_fn_error "invalid package name: $ac_useropt"+ ac_useropt_orig=$ac_useropt+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`+ case $ac_user_opts in+ *"+"with_$ac_useropt"+"*) ;;+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"+ ac_unrecognized_sep=', ';;+ esac+ eval with_$ac_useropt=no ;;++ --x)+ # Obsolete; use --with-x.+ with_x=yes ;;++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \+ | --x-incl | --x-inc | --x-in | --x-i)+ ac_prev=x_includes ;;+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)+ x_includes=$ac_optarg ;;++ -x-libraries | --x-libraries | --x-librarie | --x-librari \+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)+ ac_prev=x_libraries ;;+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)+ x_libraries=$ac_optarg ;;++ -*) as_fn_error "unrecognized option: \`$ac_option'+Try \`$0 --help' for more information."+ ;;++ *=*)+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`+ # Reject names that are not valid shell variable names.+ case $ac_envvar in #(+ '' | [0-9]* | *[!_$as_cr_alnum]* )+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;+ esac+ eval $ac_envvar=\$ac_optarg+ export $ac_envvar ;;++ *)+ # FIXME: should be removed in autoconf 3.0.+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}+ ;;++ esac+done++if test -n "$ac_prev"; then+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`+ as_fn_error "missing argument to $ac_option"+fi++if test -n "$ac_unrecognized_opts"; then+ case $enable_option_checking in+ no) ;;+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;+ esac+fi++# Check all directory arguments for consistency.+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \+ datadir sysconfdir sharedstatedir localstatedir includedir \+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \+ libdir localedir mandir+do+ eval ac_val=\$$ac_var+ # Remove trailing slashes.+ case $ac_val in+ */ )+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`+ eval $ac_var=\$ac_val;;+ esac+ # Be sure to have absolute directory names.+ case $ac_val in+ [\\/$]* | ?:[\\/]* ) continue;;+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;+ esac+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"+done++# There might be people who depend on the old broken behavior: `$host'+# used to hold the argument of --host etc.+# FIXME: To remove some day.+build=$build_alias+host=$host_alias+target=$target_alias++# FIXME: To remove some day.+if test "x$host_alias" != x; then+ if test "x$build_alias" = x; then+ cross_compiling=maybe+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.+ If a cross compiler is detected then cross compile mode will be used." >&2+ elif test "x$build_alias" != "x$host_alias"; then+ cross_compiling=yes+ fi+fi++ac_tool_prefix=+test -n "$host_alias" && ac_tool_prefix=$host_alias-++test "$silent" = yes && exec 6>/dev/null+++ac_pwd=`pwd` && test -n "$ac_pwd" &&+ac_ls_di=`ls -di .` &&+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||+ as_fn_error "working directory cannot be determined"+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||+ as_fn_error "pwd does not report name of working directory"+++# Find the source files, if location was not specified.+if test -z "$srcdir"; then+ ac_srcdir_defaulted=yes+ # Try the directory containing this script, then the parent directory.+ ac_confdir=`$as_dirname -- "$as_myself" ||+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \+ X"$as_myself" : 'X\(//\)[^/]' \| \+ X"$as_myself" : 'X\(//\)$' \| \+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||+$as_echo X"$as_myself" |+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{+ s//\1/+ q+ }+ /^X\(\/\/\)[^/].*/{+ s//\1/+ q+ }+ /^X\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`+ srcdir=$ac_confdir+ if test ! -r "$srcdir/$ac_unique_file"; then+ srcdir=..+ fi+else+ ac_srcdir_defaulted=no+fi+if test ! -r "$srcdir/$ac_unique_file"; then+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"+fi+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"+ac_abs_confdir=`(+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"+ pwd)`+# When building in place, set srcdir=.+if test "$ac_abs_confdir" = "$ac_pwd"; then+ srcdir=.+fi+# Remove unnecessary trailing slashes from srcdir.+# Double slashes in file names in object file debugging info+# mess up M-x gdb in Emacs.+case $srcdir in+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;+esac+for ac_var in $ac_precious_vars; do+ eval ac_env_${ac_var}_set=\${${ac_var}+set}+ eval ac_env_${ac_var}_value=\$${ac_var}+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}+ eval ac_cv_env_${ac_var}_value=\$${ac_var}+done++#+# Report the --help message.+#+if test "$ac_init_help" = "long"; then+ # Omit some internal or obsolete options to make the list less imposing.+ # This message is too long to be a string in the A/UX 3.1 sh.+ cat <<_ACEOF+\`configure' configures xmms2-client 0.0.2.0 to adapt to many kinds of systems.++Usage: $0 [OPTION]... [VAR=VALUE]...++To assign environment variables (e.g., CC, CFLAGS...), specify them as+VAR=VALUE. See below for descriptions of some of the useful variables.++Defaults for the options are specified in brackets.++Configuration:+ -h, --help display this help and exit+ --help=short display options specific to this package+ --help=recursive display the short help of all the included packages+ -V, --version display version information and exit+ -q, --quiet, --silent do not print \`checking...' messages+ --cache-file=FILE cache test results in FILE [disabled]+ -C, --config-cache alias for \`--cache-file=config.cache'+ -n, --no-create do not create output files+ --srcdir=DIR find the sources in DIR [configure dir or \`..']++Installation directories:+ --prefix=PREFIX install architecture-independent files in PREFIX+ [$ac_default_prefix]+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX+ [PREFIX]++By default, \`make install' will install all the files in+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify+an installation prefix other than \`$ac_default_prefix' using \`--prefix',+for instance \`--prefix=\$HOME'.++For better control, use the options below.++Fine tuning of the installation directories:+ --bindir=DIR user executables [EPREFIX/bin]+ --sbindir=DIR system admin executables [EPREFIX/sbin]+ --libexecdir=DIR program executables [EPREFIX/libexec]+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]+ --libdir=DIR object code libraries [EPREFIX/lib]+ --includedir=DIR C header files [PREFIX/include]+ --oldincludedir=DIR C header files for non-gcc [/usr/include]+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]+ --infodir=DIR info documentation [DATAROOTDIR/info]+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]+ --mandir=DIR man documentation [DATAROOTDIR/man]+ --docdir=DIR documentation root [DATAROOTDIR/doc/xmms2-client]+ --htmldir=DIR html documentation [DOCDIR]+ --dvidir=DIR dvi documentation [DOCDIR]+ --pdfdir=DIR pdf documentation [DOCDIR]+ --psdir=DIR ps documentation [DOCDIR]+_ACEOF++ cat <<\_ACEOF+_ACEOF+fi++if test -n "$ac_init_help"; then+ case $ac_init_help in+ short | recursive ) echo "Configuration of xmms2-client 0.0.2.0:";;+ esac+ cat <<\_ACEOF++Optional Packages:+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)+++Some influential environment variables:+ PKG_CONFIG path to pkg-config utility+ XMMS2_CLIENT_CFLAGS+ C compiler flags for XMMS2_CLIENT, overriding pkg-config+ XMMS2_CLIENT_LIBS+ linker flags for XMMS2_CLIENT, overriding pkg-config++Use these variables to override the choices made by `configure' or to help+it to find libraries and programs with nonstandard names/locations.++Report bugs to <upwawet@gmail.com>.+_ACEOF+ac_status=$?+fi++if test "$ac_init_help" = "recursive"; then+ # If there are subdirs, report their specific --help.+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue+ test -d "$ac_dir" ||+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||+ continue+ ac_builddir=.++case "$ac_dir" in+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;+*)+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`+ # A ".." for each directory in $ac_dir_suffix.+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`+ case $ac_top_builddir_sub in+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;+ esac ;;+esac+ac_abs_top_builddir=$ac_pwd+ac_abs_builddir=$ac_pwd$ac_dir_suffix+# for backward compatibility:+ac_top_builddir=$ac_top_build_prefix++case $srcdir in+ .) # We are building in place.+ ac_srcdir=.+ ac_top_srcdir=$ac_top_builddir_sub+ ac_abs_top_srcdir=$ac_pwd ;;+ [\\/]* | ?:[\\/]* ) # Absolute name.+ ac_srcdir=$srcdir$ac_dir_suffix;+ ac_top_srcdir=$srcdir+ ac_abs_top_srcdir=$srcdir ;;+ *) # Relative name.+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix+ ac_top_srcdir=$ac_top_build_prefix$srcdir+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;+esac+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix++ cd "$ac_dir" || { ac_status=$?; continue; }+ # Check for guested configure.+ if test -f "$ac_srcdir/configure.gnu"; then+ echo &&+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive+ elif test -f "$ac_srcdir/configure"; then+ echo &&+ $SHELL "$ac_srcdir/configure" --help=recursive+ else+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2+ fi || ac_status=$?+ cd "$ac_pwd" || { ac_status=$?; break; }+ done+fi++test -n "$ac_init_help" && exit $ac_status+if $ac_init_version; then+ cat <<\_ACEOF+xmms2-client configure 0.0.2.0+generated by GNU Autoconf 2.65++Copyright (C) 2009 Free Software Foundation, Inc.+This configure script is free software; the Free Software Foundation+gives unlimited permission to copy, distribute and modify it.+_ACEOF+ exit+fi++## ------------------------ ##+## Autoconf initialization. ##+## ------------------------ ##+cat >config.log <<_ACEOF+This file contains any messages produced by compilers while+running configure, to aid debugging if configure makes a mistake.++It was created by xmms2-client $as_me 0.0.2.0, which was+generated by GNU Autoconf 2.65. Invocation command line was++ $ $0 $@++_ACEOF+exec 5>>config.log+{+cat <<_ASUNAME+## --------- ##+## Platform. ##+## --------- ##++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`+uname -m = `(uname -m) 2>/dev/null || echo unknown`+uname -r = `(uname -r) 2>/dev/null || echo unknown`+uname -s = `(uname -s) 2>/dev/null || echo unknown`+uname -v = `(uname -v) 2>/dev/null || echo unknown`++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`++_ASUNAME++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ $as_echo "PATH: $as_dir"+ done+IFS=$as_save_IFS++} >&5++cat >&5 <<_ACEOF+++## ----------- ##+## Core tests. ##+## ----------- ##++_ACEOF+++# Keep a trace of the command line.+# Strip out --no-create and --no-recursion so they do not pile up.+# Strip out --silent because we don't want to record it for future runs.+# Also quote any args containing shell meta-characters.+# Make two passes to allow for proper duplicate-argument suppression.+ac_configure_args=+ac_configure_args0=+ac_configure_args1=+ac_must_keep_next=false+for ac_pass in 1 2+do+ for ac_arg+ do+ case $ac_arg in+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \+ | -silent | --silent | --silen | --sile | --sil)+ continue ;;+ *\'*)+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;+ esac+ case $ac_pass in+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;+ 2)+ as_fn_append ac_configure_args1 " '$ac_arg'"+ if test $ac_must_keep_next = true; then+ ac_must_keep_next=false # Got value, back to normal.+ else+ case $ac_arg in+ *=* | --config-cache | -C | -disable-* | --disable-* \+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \+ | -with-* | --with-* | -without-* | --without-* | --x)+ case "$ac_configure_args0 " in+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;+ esac+ ;;+ -* ) ac_must_keep_next=true ;;+ esac+ fi+ as_fn_append ac_configure_args " '$ac_arg'"+ ;;+ esac+ done+done+{ ac_configure_args0=; unset ac_configure_args0;}+{ ac_configure_args1=; unset ac_configure_args1;}++# When interrupted or exit'd, cleanup temporary files, and complete+# config.log. We remove comments because anyway the quotes in there+# would cause problems or look ugly.+# WARNING: Use '\'' to represent an apostrophe within the trap.+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.+trap 'exit_status=$?+ # Save into config.log some information that might help in debugging.+ {+ echo++ cat <<\_ASBOX+## ---------------- ##+## Cache variables. ##+## ---------------- ##+_ASBOX+ echo+ # The following way of writing the cache mishandles newlines in values,+(+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do+ eval ac_val=\$$ac_var+ case $ac_val in #(+ *${as_nl}*)+ case $ac_var in #(+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;+ esac+ case $ac_var in #(+ _ | IFS | as_nl) ;; #(+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(+ *) { eval $ac_var=; unset $ac_var;} ;;+ esac ;;+ esac+ done+ (set) 2>&1 |+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(+ *${as_nl}ac_space=\ *)+ sed -n \+ "s/'\''/'\''\\\\'\'''\''/g;+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"+ ;; #(+ *)+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"+ ;;+ esac |+ sort+)+ echo++ cat <<\_ASBOX+## ----------------- ##+## Output variables. ##+## ----------------- ##+_ASBOX+ echo+ for ac_var in $ac_subst_vars+ do+ eval ac_val=\$$ac_var+ case $ac_val in+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;+ esac+ $as_echo "$ac_var='\''$ac_val'\''"+ done | sort+ echo++ if test -n "$ac_subst_files"; then+ cat <<\_ASBOX+## ------------------- ##+## File substitutions. ##+## ------------------- ##+_ASBOX+ echo+ for ac_var in $ac_subst_files+ do+ eval ac_val=\$$ac_var+ case $ac_val in+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;+ esac+ $as_echo "$ac_var='\''$ac_val'\''"+ done | sort+ echo+ fi++ if test -s confdefs.h; then+ cat <<\_ASBOX+## ----------- ##+## confdefs.h. ##+## ----------- ##+_ASBOX+ echo+ cat confdefs.h+ echo+ fi+ test "$ac_signal" != 0 &&+ $as_echo "$as_me: caught signal $ac_signal"+ $as_echo "$as_me: exit $exit_status"+ } >&5+ rm -f core *.core core.conftest.* &&+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&+ exit $exit_status+' 0+for ac_signal in 1 2 13 15; do+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal+done+ac_signal=0++# confdefs.h avoids OS command line length limits that DEFS can exceed.+rm -f -r conftest* confdefs.h++$as_echo "/* confdefs.h */" > confdefs.h++# Predefined preprocessor variables.++cat >>confdefs.h <<_ACEOF+#define PACKAGE_NAME "$PACKAGE_NAME"+_ACEOF++cat >>confdefs.h <<_ACEOF+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"+_ACEOF++cat >>confdefs.h <<_ACEOF+#define PACKAGE_VERSION "$PACKAGE_VERSION"+_ACEOF++cat >>confdefs.h <<_ACEOF+#define PACKAGE_STRING "$PACKAGE_STRING"+_ACEOF++cat >>confdefs.h <<_ACEOF+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"+_ACEOF++cat >>confdefs.h <<_ACEOF+#define PACKAGE_URL "$PACKAGE_URL"+_ACEOF+++# Let the site file select an alternate cache file if it wants to.+# Prefer an explicitly selected file to automatically selected ones.+ac_site_file1=NONE+ac_site_file2=NONE+if test -n "$CONFIG_SITE"; then+ ac_site_file1=$CONFIG_SITE+elif test "x$prefix" != xNONE; then+ ac_site_file1=$prefix/share/config.site+ ac_site_file2=$prefix/etc/config.site+else+ ac_site_file1=$ac_default_prefix/share/config.site+ ac_site_file2=$ac_default_prefix/etc/config.site+fi+for ac_site_file in "$ac_site_file1" "$ac_site_file2"+do+ test "x$ac_site_file" = xNONE && continue+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5+$as_echo "$as_me: loading site script $ac_site_file" >&6;}+ sed 's/^/| /' "$ac_site_file" >&5+ . "$ac_site_file"+ fi+done++if test -r "$cache_file"; then+ # Some versions of bash will fail to source /dev/null (special files+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5+$as_echo "$as_me: loading cache $cache_file" >&6;}+ case $cache_file in+ [\\/]* | ?:[\\/]* ) . "$cache_file";;+ *) . "./$cache_file";;+ esac+ fi+else+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5+$as_echo "$as_me: creating cache $cache_file" >&6;}+ >$cache_file+fi++# Check that the precious variables saved in the cache have kept the same+# value.+ac_cache_corrupted=false+for ac_var in $ac_precious_vars; do+ eval ac_old_set=\$ac_cv_env_${ac_var}_set+ eval ac_new_set=\$ac_env_${ac_var}_set+ eval ac_old_val=\$ac_cv_env_${ac_var}_value+ eval ac_new_val=\$ac_env_${ac_var}_value+ case $ac_old_set,$ac_new_set in+ set,)+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}+ ac_cache_corrupted=: ;;+ ,set)+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}+ ac_cache_corrupted=: ;;+ ,);;+ *)+ if test "x$ac_old_val" != "x$ac_new_val"; then+ # differences in whitespace do not lead to failure.+ ac_old_val_w=`echo x $ac_old_val`+ ac_new_val_w=`echo x $ac_new_val`+ if test "$ac_old_val_w" != "$ac_new_val_w"; then+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}+ ac_cache_corrupted=:+ else+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}+ eval $ac_var=\$ac_old_val+ fi+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}+ fi;;+ esac+ # Pass precious variables to config.status.+ if test "$ac_new_set" = set; then+ case $ac_new_val in+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;+ *) ac_arg=$ac_var=$ac_new_val ;;+ esac+ case " $ac_configure_args " in+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;+ esac+ fi+done+if $ac_cache_corrupted; then+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5+fi+## -------------------- ##+## Main body of script. ##+## -------------------- ##++ac_ext=c+ac_cpp='$CPP $CPPFLAGS'+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'+ac_compiler_gnu=$ac_cv_c_compiler_gnu++++++# Check whether --with-compiler was given.+if test "${with_compiler+set}" = set; then :+ withval=$with_compiler;+fi+++c2hs --copy-library++++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then+ if test -n "$ac_tool_prefix"; then+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5+$as_echo_n "checking for $ac_word... " >&6; }+if test "${ac_cv_path_PKG_CONFIG+set}" = set; then :+ $as_echo_n "(cached) " >&6+else+ case $PKG_CONFIG in+ [\\/]* | ?:[\\/]*)+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.+ ;;+ *)+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ for ac_exec_ext in '' $ac_executable_extensions; do+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5+ break 2+ fi+done+ done+IFS=$as_save_IFS++ ;;+esac+fi+PKG_CONFIG=$ac_cv_path_PKG_CONFIG+if test -n "$PKG_CONFIG"; then+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5+$as_echo "$PKG_CONFIG" >&6; }+else+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5+$as_echo "no" >&6; }+fi+++fi+if test -z "$ac_cv_path_PKG_CONFIG"; then+ ac_pt_PKG_CONFIG=$PKG_CONFIG+ # Extract the first word of "pkg-config", so it can be a program name with args.+set dummy pkg-config; ac_word=$2+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5+$as_echo_n "checking for $ac_word... " >&6; }+if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then :+ $as_echo_n "(cached) " >&6+else+ case $ac_pt_PKG_CONFIG in+ [\\/]* | ?:[\\/]*)+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.+ ;;+ *)+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ for ac_exec_ext in '' $ac_executable_extensions; do+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5+ break 2+ fi+done+ done+IFS=$as_save_IFS++ ;;+esac+fi+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG+if test -n "$ac_pt_PKG_CONFIG"; then+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5+$as_echo "$ac_pt_PKG_CONFIG" >&6; }+else+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5+$as_echo "no" >&6; }+fi++ if test "x$ac_pt_PKG_CONFIG" = x; then+ PKG_CONFIG=""+ else+ case $cross_compiling:$ac_tool_warned in+yes:)+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}+ac_tool_warned=yes ;;+esac+ PKG_CONFIG=$ac_pt_PKG_CONFIG+ fi+else+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"+fi++fi+if test -n "$PKG_CONFIG"; then+ _pkg_min_version=0.9.0+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5+$as_echo "yes" >&6; }+ else+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5+$as_echo "no" >&6; }+ PKG_CONFIG=""+ fi++fi++pkg_failed=no+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for XMMS2_CLIENT" >&5+$as_echo_n "checking for XMMS2_CLIENT... " >&6; }++if test -n "$PKG_CONFIG"; then+ if test -n "$XMMS2_CLIENT_CFLAGS"; then+ pkg_cv_XMMS2_CLIENT_CFLAGS="$XMMS2_CLIENT_CFLAGS"+ else+ if test -n "$PKG_CONFIG" && \+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xmms2-client\""; } >&5+ ($PKG_CONFIG --exists --print-errors "xmms2-client") 2>&5+ ac_status=$?+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5+ test $ac_status = 0; }; then+ pkg_cv_XMMS2_CLIENT_CFLAGS=`$PKG_CONFIG --cflags "xmms2-client" 2>/dev/null`+else+ pkg_failed=yes+fi+ fi+else+ pkg_failed=untried+fi+if test -n "$PKG_CONFIG"; then+ if test -n "$XMMS2_CLIENT_LIBS"; then+ pkg_cv_XMMS2_CLIENT_LIBS="$XMMS2_CLIENT_LIBS"+ else+ if test -n "$PKG_CONFIG" && \+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"xmms2-client\""; } >&5+ ($PKG_CONFIG --exists --print-errors "xmms2-client") 2>&5+ ac_status=$?+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5+ test $ac_status = 0; }; then+ pkg_cv_XMMS2_CLIENT_LIBS=`$PKG_CONFIG --libs "xmms2-client" 2>/dev/null`+else+ pkg_failed=yes+fi+ fi+else+ pkg_failed=untried+fi++++if test $pkg_failed = yes; then++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then+ _pkg_short_errors_supported=yes+else+ _pkg_short_errors_supported=no+fi+ if test $_pkg_short_errors_supported = yes; then+ XMMS2_CLIENT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "xmms2-client"`+ else+ XMMS2_CLIENT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xmms2-client"`+ fi+ # Put the nasty error message in config.log where it belongs+ echo "$XMMS2_CLIENT_PKG_ERRORS" >&5++ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5+$as_echo "no" >&6; }+ no_xmms2_client=yes+elif test $pkg_failed = untried; then+ no_xmms2_client=yes+else+ XMMS2_CLIENT_CFLAGS=$pkg_cv_XMMS2_CLIENT_CFLAGS+ XMMS2_CLIENT_LIBS=$pkg_cv_XMMS2_CLIENT_LIBS+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5+$as_echo "yes" >&6; }+ :+fi+if test "$no_xmms2_client" = yes+then BUILD_PACKAGE_BOOL=False+else BUILD_PACKAGE_BOOL=True+fi+++ac_config_files="$ac_config_files xmms2-client.buildinfo Makefile src/Makefile src/Control/Makefile src/Control/Monad/Makefile src/XMMS2/Makefile src/XMMS2/Client/Makefile src/XMMS2/Client/Types/Makefile src/XMMS2/Client/Bindings/Makefile src/XMMS2/Client/Bindings/Types/Makefile"++cat >confcache <<\_ACEOF+# This file is a shell script that caches the results of configure+# tests run on this system so they can be shared between configure+# scripts and configure runs, see configure's option --config-cache.+# It is not useful on other systems. If it contains results you don't+# want to keep, you may remove or edit it.+#+# config.status only pays attention to the cache file if you give it+# the --recheck option to rerun configure.+#+# `ac_cv_env_foo' variables (set or unset) will be overridden when+# loading this file, other *unset* `ac_cv_foo' will be assigned the+# following values.++_ACEOF++# The following way of writing the cache mishandles newlines in values,+# but we know of no workaround that is simple, portable, and efficient.+# So, we kill variables containing newlines.+# Ultrix sh set writes to stderr and can't be redirected directly,+# and sets the high bit in the cache file unless we assign to the vars.+(+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do+ eval ac_val=\$$ac_var+ case $ac_val in #(+ *${as_nl}*)+ case $ac_var in #(+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;+ esac+ case $ac_var in #(+ _ | IFS | as_nl) ;; #(+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(+ *) { eval $ac_var=; unset $ac_var;} ;;+ esac ;;+ esac+ done++ (set) 2>&1 |+ case $as_nl`(ac_space=' '; set) 2>&1` in #(+ *${as_nl}ac_space=\ *)+ # `set' does not quote correctly, so add quotes: double-quote+ # substitution turns \\\\ into \\, and sed turns \\ into \.+ sed -n \+ "s/'/'\\\\''/g;+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"+ ;; #(+ *)+ # `set' quotes correctly as required by POSIX, so do not add quotes.+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"+ ;;+ esac |+ sort+) |+ sed '+ /^ac_cv_env_/b end+ t clear+ :clear+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/+ t end+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/+ :end' >>confcache+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else+ if test -w "$cache_file"; then+ test "x$cache_file" != "x/dev/null" &&+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5+$as_echo "$as_me: updating cache $cache_file" >&6;}+ cat confcache >$cache_file+ else+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}+ fi+fi+rm -f confcache++test "x$prefix" = xNONE && prefix=$ac_default_prefix+# Let make expand exec_prefix.+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'++# Transform confdefs.h into DEFS.+# Protect against shell expansion while executing Makefile rules.+# Protect against Makefile macro expansion.+#+# If the first sed substitution is executed (which looks for macros that+# take arguments), then branch to the quote section. Otherwise,+# look for a macro that doesn't take arguments.+ac_script='+:mline+/\\$/{+ N+ s,\\\n,,+ b mline+}+t clear+:clear+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g+t quote+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g+t quote+b any+:quote+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g+s/\[/\\&/g+s/\]/\\&/g+s/\$/$$/g+H+:any+${+ g+ s/^\n//+ s/\n/ /g+ p+}+'+DEFS=`sed -n "$ac_script" confdefs.h`+++ac_libobjs=+ac_ltlibobjs=+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue+ # 1. Remove the extension, and $U if already installed.+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR+ # will be set to the directory where LIBOBJS objects are built.+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'+done+LIBOBJS=$ac_libobjs++LTLIBOBJS=$ac_ltlibobjs++++: ${CONFIG_STATUS=./config.status}+ac_write_fail=0+ac_clean_files_save=$ac_clean_files+ac_clean_files="$ac_clean_files $CONFIG_STATUS"+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}+as_write_fail=0+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1+#! $SHELL+# Generated by $as_me.+# Run this file to recreate the current configuration.+# Compiler output produced by configure, useful for debugging+# configure, is in config.log if it exists.++debug=false+ac_cs_recheck=false+ac_cs_silent=false++SHELL=\${CONFIG_SHELL-$SHELL}+export SHELL+_ASEOF+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1+## -------------------- ##+## M4sh Initialization. ##+## -------------------- ##++# Be more Bourne compatible+DUALCASE=1; export DUALCASE # for MKS sh+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :+ emulate sh+ NULLCMD=:+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which+ # is contrary to our usage. Disable this feature.+ alias -g '${1+"$@"}'='"$@"'+ setopt NO_GLOB_SUBST+else+ case `(set -o) 2>/dev/null` in #(+ *posix*) :+ set -o posix ;; #(+ *) :+ ;;+esac+fi+++as_nl='+'+export as_nl+# Printing a long string crashes Solaris 7 /usr/bin/printf.+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo+# Prefer a ksh shell builtin over an external printf program on Solaris,+# but without wasting forks for bash or zsh.+if test -z "$BASH_VERSION$ZSH_VERSION" \+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then+ as_echo='print -r --'+ as_echo_n='print -rn --'+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then+ as_echo='printf %s\n'+ as_echo_n='printf %s'+else+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'+ as_echo_n='/usr/ucb/echo -n'+ else+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'+ as_echo_n_body='eval+ arg=$1;+ case $arg in #(+ *"$as_nl"*)+ expr "X$arg" : "X\\(.*\\)$as_nl";+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;+ esac;+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"+ '+ export as_echo_n_body+ as_echo_n='sh -c $as_echo_n_body as_echo'+ fi+ export as_echo_body+ as_echo='sh -c $as_echo_body as_echo'+fi++# The user is always right.+if test "${PATH_SEPARATOR+set}" != set; then+ PATH_SEPARATOR=:+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||+ PATH_SEPARATOR=';'+ }+fi+++# IFS+# We need space, tab and new line, in precisely that order. Quoting is+# there to prevent editors from complaining about space-tab.+# (If _AS_PATH_WALK were called with IFS unset, it would disable word+# splitting by setting IFS to empty value.)+IFS=" "" $as_nl"++# Find who we are. Look in the path if we contain no directory separator.+case $0 in #((+ *[\\/]* ) as_myself=$0 ;;+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break+ done+IFS=$as_save_IFS++ ;;+esac+# We did not find ourselves, most probably we were run as `sh COMMAND'+# in which case we are not to be found in the path.+if test "x$as_myself" = x; then+ as_myself=$0+fi+if test ! -f "$as_myself"; then+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2+ exit 1+fi++# Unset variables that we do not need and which cause bugs (e.g. in+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"+# suppresses any "Segmentation fault" message there. '((' could+# trigger a bug in pdksh 5.2.14.+for as_var in BASH_ENV ENV MAIL MAILPATH+do eval test x\${$as_var+set} = xset \+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :+done+PS1='$ '+PS2='> '+PS4='+ '++# NLS nuisances.+LC_ALL=C+export LC_ALL+LANGUAGE=C+export LANGUAGE++# CDPATH.+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH+++# as_fn_error ERROR [LINENO LOG_FD]+# ---------------------------------+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the+# script with status $?, using 1 if that was 0.+as_fn_error ()+{+ as_status=$?; test $as_status -eq 0 && as_status=1+ if test "$3"; then+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3+ fi+ $as_echo "$as_me: error: $1" >&2+ as_fn_exit $as_status+} # as_fn_error+++# as_fn_set_status STATUS+# -----------------------+# Set $? to STATUS, without forking.+as_fn_set_status ()+{+ return $1+} # as_fn_set_status++# as_fn_exit STATUS+# -----------------+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.+as_fn_exit ()+{+ set +e+ as_fn_set_status $1+ exit $1+} # as_fn_exit++# as_fn_unset VAR+# ---------------+# Portably unset VAR.+as_fn_unset ()+{+ { eval $1=; unset $1;}+}+as_unset=as_fn_unset+# as_fn_append VAR VALUE+# ----------------------+# Append the text in VALUE to the end of the definition contained in VAR. Take+# advantage of any shell optimizations that allow amortized linear growth over+# repeated appends, instead of the typical quadratic growth present in naive+# implementations.+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :+ eval 'as_fn_append ()+ {+ eval $1+=\$2+ }'+else+ as_fn_append ()+ {+ eval $1=\$$1\$2+ }+fi # as_fn_append++# as_fn_arith ARG...+# ------------------+# Perform arithmetic evaluation on the ARGs, and store the result in the+# global $as_val. Take advantage of shells that can avoid forks. The arguments+# must be portable across $(()) and expr.+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :+ eval 'as_fn_arith ()+ {+ as_val=$(( $* ))+ }'+else+ as_fn_arith ()+ {+ as_val=`expr "$@" || test $? -eq 1`+ }+fi # as_fn_arith+++if expr a : '\(a\)' >/dev/null 2>&1 &&+ test "X`expr 00001 : '.*\(...\)'`" = X001; then+ as_expr=expr+else+ as_expr=false+fi++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then+ as_basename=basename+else+ as_basename=false+fi++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then+ as_dirname=dirname+else+ as_dirname=false+fi++as_me=`$as_basename -- "$0" ||+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \+ X"$0" : 'X\(//\)$' \| \+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||+$as_echo X/"$0" |+ sed '/^.*\/\([^/][^/]*\)\/*$/{+ s//\1/+ q+ }+ /^X\/\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\/\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`++# Avoid depending upon Character Ranges.+as_cr_letters='abcdefghijklmnopqrstuvwxyz'+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'+as_cr_Letters=$as_cr_letters$as_cr_LETTERS+as_cr_digits='0123456789'+as_cr_alnum=$as_cr_Letters$as_cr_digits++ECHO_C= ECHO_N= ECHO_T=+case `echo -n x` in #(((((+-n*)+ case `echo 'xy\c'` in+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.+ xy) ECHO_C='\c';;+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null+ ECHO_T=' ';;+ esac;;+*)+ ECHO_N='-n';;+esac++rm -f conf$$ conf$$.exe conf$$.file+if test -d conf$$.dir; then+ rm -f conf$$.dir/conf$$.file+else+ rm -f conf$$.dir+ mkdir conf$$.dir 2>/dev/null+fi+if (echo >conf$$.file) 2>/dev/null; then+ if ln -s conf$$.file conf$$ 2>/dev/null; then+ as_ln_s='ln -s'+ # ... but there are two gotchas:+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.+ # In both cases, we have to default to `cp -p'.+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||+ as_ln_s='cp -p'+ elif ln conf$$.file conf$$ 2>/dev/null; then+ as_ln_s=ln+ else+ as_ln_s='cp -p'+ fi+else+ as_ln_s='cp -p'+fi+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file+rmdir conf$$.dir 2>/dev/null+++# as_fn_mkdir_p+# -------------+# Create "$as_dir" as a directory, including parents if necessary.+as_fn_mkdir_p ()+{++ case $as_dir in #(+ -*) as_dir=./$as_dir;;+ esac+ test -d "$as_dir" || eval $as_mkdir_p || {+ as_dirs=+ while :; do+ case $as_dir in #(+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(+ *) as_qdir=$as_dir;;+ esac+ as_dirs="'$as_qdir' $as_dirs"+ as_dir=`$as_dirname -- "$as_dir" ||+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \+ X"$as_dir" : 'X\(//\)[^/]' \| \+ X"$as_dir" : 'X\(//\)$' \| \+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||+$as_echo X"$as_dir" |+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{+ s//\1/+ q+ }+ /^X\(\/\/\)[^/].*/{+ s//\1/+ q+ }+ /^X\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`+ test -d "$as_dir" && break+ done+ test -z "$as_dirs" || eval "mkdir $as_dirs"+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"+++} # as_fn_mkdir_p+if mkdir -p . 2>/dev/null; then+ as_mkdir_p='mkdir -p "$as_dir"'+else+ test -d ./-p && rmdir ./-p+ as_mkdir_p=false+fi++if test -x / >/dev/null 2>&1; then+ as_test_x='test -x'+else+ if ls -dL / >/dev/null 2>&1; then+ as_ls_L_option=L+ else+ as_ls_L_option=+ fi+ as_test_x='+ eval sh -c '\''+ if test -d "$1"; then+ test -d "$1/.";+ else+ case $1 in #(+ -*)set "./$1";;+ esac;+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((+ ???[sx]*):;;*)false;;esac;fi+ '\'' sh+ '+fi+as_executable_p=$as_test_x++# Sed expression to map a string onto a valid CPP name.+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"++# Sed expression to map a string onto a valid variable name.+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"+++exec 6>&1+## ----------------------------------- ##+## Main body of $CONFIG_STATUS script. ##+## ----------------------------------- ##+_ASEOF+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1+# Save the log message, to keep $0 and so on meaningful, and to+# report actual input values of CONFIG_FILES etc. instead of their+# values after options handling.+ac_log="+This file was extended by xmms2-client $as_me 0.0.2.0, which was+generated by GNU Autoconf 2.65. Invocation command line was++ CONFIG_FILES = $CONFIG_FILES+ CONFIG_HEADERS = $CONFIG_HEADERS+ CONFIG_LINKS = $CONFIG_LINKS+ CONFIG_COMMANDS = $CONFIG_COMMANDS+ $ $0 $@++on `(hostname || uname -n) 2>/dev/null | sed 1q`+"++_ACEOF++case $ac_config_files in *"+"*) set x $ac_config_files; shift; ac_config_files=$*;;+esac++++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1+# Files that config.status was made for.+config_files="$ac_config_files"++_ACEOF++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1+ac_cs_usage="\+\`$as_me' instantiates files and other configuration actions+from templates according to the current configuration. Unless the files+and actions are specified as TAGs, all are instantiated by default.++Usage: $0 [OPTION]... [TAG]...++ -h, --help print this help, then exit+ -V, --version print version number and configuration settings, then exit+ --config print configuration, then exit+ -q, --quiet, --silent+ do not print progress messages+ -d, --debug don't remove temporary files+ --recheck update $as_me by reconfiguring in the same conditions+ --file=FILE[:TEMPLATE]+ instantiate the configuration file FILE++Configuration files:+$config_files++Report bugs to <upwawet@gmail.com>."++_ACEOF+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"+ac_cs_version="\\+xmms2-client config.status 0.0.2.0+configured by $0, generated by GNU Autoconf 2.65,+ with options \\"\$ac_cs_config\\"++Copyright (C) 2009 Free Software Foundation, Inc.+This config.status script is free software; the Free Software Foundation+gives unlimited permission to copy, distribute and modify it."++ac_pwd='$ac_pwd'+srcdir='$srcdir'+test -n "\$AWK" || AWK=awk+_ACEOF++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1+# The default lists apply if the user does not specify any file.+ac_need_defaults=:+while test $# != 0+do+ case $1 in+ --*=*)+ ac_option=`expr "X$1" : 'X\([^=]*\)='`+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`+ ac_shift=:+ ;;+ *)+ ac_option=$1+ ac_optarg=$2+ ac_shift=shift+ ;;+ esac++ case $ac_option in+ # Handling of the options.+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)+ ac_cs_recheck=: ;;+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )+ $as_echo "$ac_cs_version"; exit ;;+ --config | --confi | --conf | --con | --co | --c )+ $as_echo "$ac_cs_config"; exit ;;+ --debug | --debu | --deb | --de | --d | -d )+ debug=: ;;+ --file | --fil | --fi | --f )+ $ac_shift+ case $ac_optarg in+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;+ esac+ as_fn_append CONFIG_FILES " '$ac_optarg'"+ ac_need_defaults=false;;+ --he | --h | --help | --hel | -h )+ $as_echo "$ac_cs_usage"; exit ;;+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \+ | -silent | --silent | --silen | --sile | --sil | --si | --s)+ ac_cs_silent=: ;;++ # This is an error.+ -*) as_fn_error "unrecognized option: \`$1'+Try \`$0 --help' for more information." ;;++ *) as_fn_append ac_config_targets " $1"+ ac_need_defaults=false ;;++ esac+ shift+done++ac_configure_extra_args=++if $ac_cs_silent; then+ exec 6>/dev/null+ ac_configure_extra_args="$ac_configure_extra_args --silent"+fi++_ACEOF+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1+if \$ac_cs_recheck; then+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion+ shift+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6+ CONFIG_SHELL='$SHELL'+ export CONFIG_SHELL+ exec "\$@"+fi++_ACEOF+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1+exec 5>>config.log+{+ echo+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX+## Running $as_me. ##+_ASBOX+ $as_echo "$ac_log"+} >&5++_ACEOF+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1+_ACEOF++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1++# Handling of arguments.+for ac_config_target in $ac_config_targets+do+ case $ac_config_target in+ "xmms2-client.buildinfo") CONFIG_FILES="$CONFIG_FILES xmms2-client.buildinfo" ;;+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;+ "src/Control/Makefile") CONFIG_FILES="$CONFIG_FILES src/Control/Makefile" ;;+ "src/Control/Monad/Makefile") CONFIG_FILES="$CONFIG_FILES src/Control/Monad/Makefile" ;;+ "src/XMMS2/Makefile") CONFIG_FILES="$CONFIG_FILES src/XMMS2/Makefile" ;;+ "src/XMMS2/Client/Makefile") CONFIG_FILES="$CONFIG_FILES src/XMMS2/Client/Makefile" ;;+ "src/XMMS2/Client/Types/Makefile") CONFIG_FILES="$CONFIG_FILES src/XMMS2/Client/Types/Makefile" ;;+ "src/XMMS2/Client/Bindings/Makefile") CONFIG_FILES="$CONFIG_FILES src/XMMS2/Client/Bindings/Makefile" ;;+ "src/XMMS2/Client/Bindings/Types/Makefile") CONFIG_FILES="$CONFIG_FILES src/XMMS2/Client/Bindings/Types/Makefile" ;;++ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;+ esac+done+++# If the user did not use the arguments to specify the items to instantiate,+# then the envvar interface is used. Set only those that are not.+# We use the long form for the default assignment because of an extremely+# bizarre bug on SunOS 4.1.3.+if $ac_need_defaults; then+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files+fi++# Have a temporary directory for convenience. Make it in the build tree+# simply because there is no reason against having it here, and in addition,+# creating and moving files from /tmp can sometimes cause problems.+# Hook for its removal unless debugging.+# Note that there is a small window in which the directory will not be cleaned:+# after its creation but before its name has been assigned to `$tmp'.+$debug ||+{+ tmp=+ trap 'exit_status=$?+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status+' 0+ trap 'as_fn_exit 1' 1 2 13 15+}+# Create a (secure) tmp directory for tmp files.++{+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&+ test -n "$tmp" && test -d "$tmp"+} ||+{+ tmp=./conf$$-$RANDOM+ (umask 077 && mkdir "$tmp")+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5++# Set up the scripts for CONFIG_FILES section.+# No need to generate them if there are no CONFIG_FILES.+# This happens for instance with `./config.status config.h'.+if test -n "$CONFIG_FILES"; then+++ac_cr=`echo X | tr X '\015'`+# On cygwin, bash can eat \r inside `` if the user requested igncr.+# But we know of no other shell where ac_cr would be empty at this+# point, so we can use a bashism as a fallback.+if test "x$ac_cr" = x; then+ eval ac_cr=\$\'\\r\'+fi+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then+ ac_cs_awk_cr='\r'+else+ ac_cs_awk_cr=$ac_cr+fi++echo 'BEGIN {' >"$tmp/subs1.awk" &&+_ACEOF+++{+ echo "cat >conf$$subs.awk <<_ACEOF" &&+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&+ echo "_ACEOF"+} >conf$$subs.sh ||+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`+ac_delim='%!_!# '+for ac_last_try in false false false false false :; do+ . ./conf$$subs.sh ||+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5++ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`+ if test $ac_delim_n = $ac_delim_num; then+ break+ elif $ac_last_try; then+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5+ else+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "+ fi+done+rm -f conf$$subs.sh++cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&+_ACEOF+sed -n '+h+s/^/S["/; s/!.*/"]=/+p+g+s/^[^!]*!//+:repl+t repl+s/'"$ac_delim"'$//+t delim+:nl+h+s/\(.\{148\}\)..*/\1/+t more1+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/+p+n+b repl+:more1+s/["\\]/\\&/g; s/^/"/; s/$/"\\/+p+g+s/.\{148\}//+t nl+:delim+h+s/\(.\{148\}\)..*/\1/+t more2+s/["\\]/\\&/g; s/^/"/; s/$/"/+p+b+:more2+s/["\\]/\\&/g; s/^/"/; s/$/"\\/+p+g+s/.\{148\}//+t delim+' <conf$$subs.awk | sed '+/^[^""]/{+ N+ s/\n//+}+' >>$CONFIG_STATUS || ac_write_fail=1+rm -f conf$$subs.awk+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1+_ACAWK+cat >>"\$tmp/subs1.awk" <<_ACAWK &&+ for (key in S) S_is_set[key] = 1+ FS = ""++}+{+ line = $ 0+ nfields = split(line, field, "@")+ substed = 0+ len = length(field[1])+ for (i = 2; i < nfields; i++) {+ key = field[i]+ keylen = length(key)+ if (S_is_set[key]) {+ value = S[key]+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)+ len += length(value) + length(field[++i])+ substed = 1+ } else+ len += 1 + keylen+ }++ print line+}++_ACAWK+_ACEOF+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"+else+ cat+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \+ || as_fn_error "could not setup config files machinery" "$LINENO" 5+_ACEOF++# VPATH may cause trouble with some makes, so we remove $(srcdir),+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and+# trailing colons and then remove the whole line if VPATH becomes empty+# (actually we leave an empty line to preserve line numbers).+if test "x$srcdir" = x.; then+ ac_vpsub='/^[ ]*VPATH[ ]*=/{+s/:*\$(srcdir):*/:/+s/:*\${srcdir}:*/:/+s/:*@srcdir@:*/:/+s/^\([^=]*=[ ]*\):*/\1/+s/:*$//+s/^[^=]*=[ ]*$//+}'+fi++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1+fi # test -n "$CONFIG_FILES"+++eval set X " :F $CONFIG_FILES "+shift+for ac_tag+do+ case $ac_tag in+ :[FHLC]) ac_mode=$ac_tag; continue;;+ esac+ case $ac_mode$ac_tag in+ :[FHL]*:*);;+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;+ :[FH]-) ac_tag=-:-;;+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;+ esac+ ac_save_IFS=$IFS+ IFS=:+ set x $ac_tag+ IFS=$ac_save_IFS+ shift+ ac_file=$1+ shift++ case $ac_mode in+ :L) ac_source=$1;;+ :[FH])+ ac_file_inputs=+ for ac_f+ do+ case $ac_f in+ -) ac_f="$tmp/stdin";;+ *) # Look for the file first in the build tree, then in the source tree+ # (if the path is not absolute). The absolute path cannot be DOS-style,+ # because $ac_f cannot contain `:'.+ test -f "$ac_f" ||+ case $ac_f in+ [\\/$]*) false;;+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;+ esac ||+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;+ esac+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac+ as_fn_append ac_file_inputs " '$ac_f'"+ done++ # Let's still pretend it is `configure' which instantiates (i.e., don't+ # use $as_me), people would be surprised to read:+ # /* config.h. Generated by config.status. */+ configure_input='Generated from '`+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'+ `' by configure.'+ if test x"$ac_file" != x-; then+ configure_input="$ac_file. $configure_input"+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5+$as_echo "$as_me: creating $ac_file" >&6;}+ fi+ # Neutralize special characters interpreted by sed in replacement strings.+ case $configure_input in #(+ *\&* | *\|* | *\\* )+ ac_sed_conf_input=`$as_echo "$configure_input" |+ sed 's/[\\\\&|]/\\\\&/g'`;; #(+ *) ac_sed_conf_input=$configure_input;;+ esac++ case $ac_tag in+ *:-:* | *:-) cat >"$tmp/stdin" \+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;+ esac+ ;;+ esac++ ac_dir=`$as_dirname -- "$ac_file" ||+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \+ X"$ac_file" : 'X\(//\)[^/]' \| \+ X"$ac_file" : 'X\(//\)$' \| \+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||+$as_echo X"$ac_file" |+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{+ s//\1/+ q+ }+ /^X\(\/\/\)[^/].*/{+ s//\1/+ q+ }+ /^X\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`+ as_dir="$ac_dir"; as_fn_mkdir_p+ ac_builddir=.++case "$ac_dir" in+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;+*)+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`+ # A ".." for each directory in $ac_dir_suffix.+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`+ case $ac_top_builddir_sub in+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;+ esac ;;+esac+ac_abs_top_builddir=$ac_pwd+ac_abs_builddir=$ac_pwd$ac_dir_suffix+# for backward compatibility:+ac_top_builddir=$ac_top_build_prefix++case $srcdir in+ .) # We are building in place.+ ac_srcdir=.+ ac_top_srcdir=$ac_top_builddir_sub+ ac_abs_top_srcdir=$ac_pwd ;;+ [\\/]* | ?:[\\/]* ) # Absolute name.+ ac_srcdir=$srcdir$ac_dir_suffix;+ ac_top_srcdir=$srcdir+ ac_abs_top_srcdir=$srcdir ;;+ *) # Relative name.+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix+ ac_top_srcdir=$ac_top_build_prefix$srcdir+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;+esac+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix+++ case $ac_mode in+ :F)+ #+ # CONFIG_FILE+ #++_ACEOF++cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1+# If the template does not know about datarootdir, expand it.+# FIXME: This hack should be removed a few years after 2.60.+ac_datarootdir_hack=; ac_datarootdir_seen=+ac_sed_dataroot='+/datarootdir/ {+ p+ q+}+/@datadir@/p+/@docdir@/p+/@infodir@/p+/@localedir@/p+/@mandir@/p'+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in+*datarootdir*) ac_datarootdir_seen=yes;;+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}+_ACEOF+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1+ ac_datarootdir_hack='+ s&@datadir@&$datadir&g+ s&@docdir@&$docdir&g+ s&@infodir@&$infodir&g+ s&@localedir@&$localedir&g+ s&@mandir@&$mandir&g+ s&\\\${datarootdir}&$datarootdir&g' ;;+esac+_ACEOF++# Neutralize VPATH when `$srcdir' = `.'.+# Shell code in configure.ac might set extrasub.+# FIXME: do we really want to maintain this feature?+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1+ac_sed_extra="$ac_vpsub+$extrasub+_ACEOF+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1+:t+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b+s|@configure_input@|$ac_sed_conf_input|;t t+s&@top_builddir@&$ac_top_builddir_sub&;t t+s&@top_build_prefix@&$ac_top_build_prefix&;t t+s&@srcdir@&$ac_srcdir&;t t+s&@abs_srcdir@&$ac_abs_srcdir&;t t+s&@top_srcdir@&$ac_top_srcdir&;t t+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t+s&@builddir@&$ac_builddir&;t t+s&@abs_builddir@&$ac_abs_builddir&;t t+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t+$ac_datarootdir_hack+"+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \+ || as_fn_error "could not create $ac_file" "$LINENO" 5++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'+which seems to be undefined. Please make sure it is defined." >&5+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'+which seems to be undefined. Please make sure it is defined." >&2;}++ rm -f "$tmp/stdin"+ case $ac_file in+ -) cat "$tmp/out" && rm -f "$tmp/out";;+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;+ esac \+ || as_fn_error "could not create $ac_file" "$LINENO" 5+ ;;++++ esac++done # for ac_tag+++as_fn_exit 0+_ACEOF+ac_clean_files=$ac_clean_files_save++test $ac_write_fail = 0 ||+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5+++# configure is writing to config.log, and then calls config.status.+# config.status does its own redirection, appending to config.log.+# Unfortunately, on DOS this fails, as config.log is still kept open+# by configure, so config.status won't be able to write to it; its+# output is simply discarded. So we exec the FD to /dev/null,+# effectively closing config.log, so it can be properly (re)opened and+# appended to by config.status. When coming back to configure, we+# need to make the FD available again.+if test "$no_create" != yes; then+ ac_cs_success=:+ ac_config_status_args=+ test "$silent" = yes &&+ ac_config_status_args="$ac_config_status_args --quiet"+ exec 5>/dev/null+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false+ exec 5>>config.log+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which+ # would make configure fail if this is the last instruction.+ $ac_cs_success || as_fn_exit $?+fi+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}+fi+
+ configure.ac view
@@ -0,0 +1,25 @@+AC_INIT(xmms2-client, [0.0.2.0], [upwawet@gmail.com])+AC_CONFIG_SRCDIR([xmms2-client.cabal])++AC_ARG_WITH(compiler, [])++c2hs --copy-library++PKG_CHECK_MODULES(XMMS2_CLIENT, xmms2-client, , no_xmms2_client=yes)+if test "$no_xmms2_client" = yes+then BUILD_PACKAGE_BOOL=False+else BUILD_PACKAGE_BOOL=True+fi+AC_SUBST(BUILD_PACKAGE_BOOL)++AC_CONFIG_FILES(xmms2-client.buildinfo+ Makefile+ src/Makefile+ src/Control/Makefile+ src/Control/Monad/Makefile+ src/XMMS2/Makefile+ src/XMMS2/Client/Makefile+ src/XMMS2/Client/Types/Makefile+ src/XMMS2/Client/Bindings/Makefile+ src/XMMS2/Client/Bindings/Types/Makefile)+AC_OUTPUT
+ src/Control/Makefile.in view
@@ -0,0 +1,1 @@+include @abs_top_srcdir@/Makefile
+ src/Control/Monad/Makefile.in view
@@ -0,0 +1,1 @@+include @abs_top_srcdir@/Makefile
+ src/Makefile.in view
@@ -0,0 +1,1 @@+include @abs_top_srcdir@/Makefile
+ src/XMMS2/Client/Bindings/Makefile.in view
@@ -0,0 +1,1 @@+include @abs_top_srcdir@/Makefile
+ src/XMMS2/Client/Bindings/Types/Makefile.in view
@@ -0,0 +1,1 @@+include @abs_top_srcdir@/Makefile
+ src/XMMS2/Client/Makefile.in view
@@ -0,0 +1,1 @@+include @abs_top_srcdir@/Makefile
+ src/XMMS2/Client/Types/Makefile.in view
@@ -0,0 +1,1 @@+include @abs_top_srcdir@/Makefile
+ src/XMMS2/Makefile.in view
@@ -0,0 +1,1 @@+include @abs_top_srcdir@/Makefile
+ xmms2-client.buildinfo.in view
@@ -0,0 +1,3 @@+buildable: @BUILD_PACKAGE_BOOL@+cc-options: @XMMS2_CLIENT_CFLAGS@+ld-options: @XMMS2_CLIENT_LIBS@
xmms2-client.cabal view
@@ -1,5 +1,5 @@ name: xmms2-client-version: 0.0.3.8+version: 0.0.3.9 author: Oleg Belozeorov maintainer: Oleg Belozeorov <upwawet@gmail.com>@@ -17,7 +17,21 @@ cabal-version: >= 1.6 build-type: Simple-extra-source-files: src/c/xmms2hs-client.h+extra-source-files: xmms2-client.buildinfo.in,+ src/c/xmms2hs-client.h,+ configure.ac,+ configure,+ aclocal.m4,+ src/Makefile.in,+ src/XMMS2/Makefile.in,+ src/XMMS2/Client/Bindings/Makefile.in,+ src/XMMS2/Client/Bindings/Types/Makefile.in,+ src/XMMS2/Client/Makefile.in,+ src/XMMS2/Client/Types/Makefile.in,+ src/Control/Makefile.in,+ src/Control/Monad/Makefile.in,+ Makefile.in+ extra-tmp-files: config.status, config.log, xmms2-client.buildinfo, C2HS.hs, hlint.out@@ -85,4 +99,4 @@ type: git location: git://github.com/upwawet/xmms2hs.git subdir: client- tag: v0.0.3.8+ tag: v0.0.3.9