phladiprelio-ukrainian-simple 0.20.2.0 → 0.20.2.1

raw patch · 4 files changed

+7/−3 lines, 4 filesPVP ok

version bump matches the API change (PVP)

API changes (from Hackage documentation)

Files

• CHANGELOG.md +4/−0
• Main.hs +1/−1
• README.md +1/−1
• phladiprelio-ukrainian-simple.cabal +1/−1

@@ -231,3 +231,7 @@  * Twentieth version revised B. Fixed issue with +l2 ... -l2 group of arguments. Updated the dependency of phladiprelio-general-datatype. Some documentation improvements. +  ## 0.20.2.1 -- 2024-04-09++* Twentieth version revised C. Fixed issue with documentation in music mode of operation. +

@@ -179,7 +179,7 @@   | xs == "k" = putStrLn "+k \t— and then the number greater than 2 (better, greater than 12, the default value if not specified is 20). The greater value leads to greater numbers. The number less than some infimum here leads to wiping of some information from the result and, therefore, probably is not the desired behaviour. For most cases the default value is just enough sensible, but you can give it a try for other values.\n"   | xs == "x" = putStrLn "+x \t— If specified with the further natural number then means that instead of maximum 7 words or their concatenations that can be analysed together as a line there will be taken the specified number here or 9 if the number is greater than 8. More words leads to more computations, therefore, please, use with this caution in mind. It can be useful mostly for the cases with the additional constraints specified (+a ... -a or +b ... -b groups, see above).\n"   | xs == "m" = putStrLn "+m \t— If present followed with two arguments — the name of the file to be used for reading data for multiline processment and the second one — the number of line to be processed. The numeration of the lines in the file for the phladiprelioUkr program here starts from 1 (so, it is: 1, 2, 3, 4,.. etc). The program then uses instead of text the specified line from the file specified here and prints information about its previous and next lines (if available).\n"-  | xs == "m2" || xs == "m3" = putStrLn "+m2 \t— If present, it means that the line with the corresponding number specified here will be taken from the same file specified as +m <file>. For example, the entry +m <file> 1 +m2 4 means that 1 line will be taken from the file <file> for the similarity analysis and it will be compared not with contents of +l2 ... -l2, but with the 4th line from the same file. \nThe abbreviation for +m <file> <num1> +m2 <num2> is +m3 <file> <num1> <num2>, which has the same meaning but a slightly shorter entry. \nIf <num1> == <num2>, then there is at least one of all the options with a property value of 0. \nYou can also use the \"music\" mode, which allows you to write better lyrics and music. To do this, you can add a record of the form _{set of digits} or ={set of digits} to a word or between syllables after the needed to be referred to, and this set of digits will be converted to a positive double-precision number by the program so that the first digit in the record is a whole number and the rest is a fraction (mantissa). \nIf you have added _{set of digits} then this number will be multiplied by the duration of the syllable to which this insertion refers, and the resulting number will be placed among the others in the place where this entry is inserted. \nIf you have added ={a set of digits} then this number will also be multiplied by the duration of the syllable to which this insertion refers, and the resulting number will be placed instead the duration that it was multiplied by. This allows to make syllables longer or shorter to follow language or creative intentions and rules (e. g. in French there have been noticed that the duration of the last syllable in the word, especially in the sentence or phrase is prolonged to some extent, so you can use '=12' or '=13' or '=14'  here). Not as for the _{set of digits} group, you can place it only after the syllable and only once to change the duration of the syllable. If you use this option, the following _{set of digits} will be referred to the new changed duration here, so that \"так\"=2_05_1 will mean that you will use instead of the usual duration of the syllable \"так\" the twice as much duration, and then half of this twice as much (therefore, equal to duration of the syllable without altering) and then again the twice as much duration etc. The insertion of =1, =10, =100, =1000 etc will not change anything at all, except for the time of computations (you probably do not need this). \nThese two additional possibilities allows you to change rhythmic structures, and interpret this insert as a musical pause or, conversely, a musical phrase inserted to change the rhythm. What syllable does this insertion refer to? It refers to the previous syllable in the line. There can be several such inserts, their number is not limited by the program itself (in the program code), but a significant number of inserts can significantly increase the duration of the calculation. \n\nWhen the results of the program are displayed on the screen, these inserts will also be displayed in the appropriate places. \n\nIf you specify _1, _10, _100, _1000, etc. as such an insertion, the program will assume that this insertion duration is equal to the duration of the syllable to which it refers. If the set of digits is preceded by a 0, the insertion has a shorter duration, if the 1 in the first 4 examples above is followed by digits other than 0, or if another digit is used instead of 1 or 0, the insertion has a longer duration. For example, _05 means exactly half the duration of the syllable, and _2 means double the duration.\n\nFor the \"music\" mode the number of syllables printed for the line does include the inserts (since the version 0.15.2.0).\n"+  | xs == "m2" || xs == "m3" = putStrLn "+m2 \t— If present, it means that the line with the corresponding number specified here will be taken from the same file specified as +m <file>. For example, the entry +m <file> 1 +m2 4 means that 1 line will be taken from the file <file> for the similarity analysis and it will be compared not with contents of +l2 ... -l2, but with the 4th line from the same file. \n\nThe abbreviation for +m <file> <num1> +m2 <num2> is +m3 <file> <num1> <num2>, which has the same meaning but a slightly shorter entry. \n\nIf <num1> == <num2>, then there is at least one of all the options with a property value of 0. \n\nYou can also use the \"music\" mode, which allows you to write better lyrics and music. To do this, you can add a record of the form _{set of digits} or ={set of digits} to a word or between syllables after the needed to be referred to, and this set of digits will be converted to a non-negative Double number by the program and then used to modulate the duration of the previous syllable or of the additional one(s) added here. The first digit in the record after '=' or '_' is a whole number and the rest is a fraction (mantissa). \n\nIf you have added _{set of digits} then this number will be multiplied by the duration of the syllable to which this insertion refers, and the resulting number will be rounded so that is can be no more than 255 (the maximum possible value of Word8 datatype that is used internally to calculate the statistics). Afterwards, this value is placed among the others in the place where this entry is inserted. \n\nIf you have added ={a set of digits} then this number will also be multiplied by the duration of the syllable to which this insertion refers, and the resulting number will be rounded and then will be placed instead of the duration that it was multiplied by (again, the maximum resulting value here can be 255, so that the greater values are rounded to this limit). This allows to make syllables longer or shorter to follow language or creative intentions and rules (e. g. in French there have been noticed that the duration of the last syllable in the word, especially in the sentence or phrase is prolonged to some extent, so you can use '=12' or '=13' or '=14'  here). Not as for the _{set of digits} group, you can place it only after the syllable and only once to change the duration of the syllable. If you use this option, the following _{set of digits} will be referred to the new changed duration here, so that \"так\"=2_05_1 will mean that you will use instead of the usual duration of the syllable \"так\" the twice as much duration, and then half of this twice as much (therefore, equal to duration of the syllable without altering) and then again the twice as much duration etc. The insertion of =1, =10, =100, =1000 etc will not change anything at all, except for the time of computations (you probably do not need this). \n\nThese two additional possibilities allows you to change rhythmic structures, and interpret this insert as a musical pause or, conversely, a musical phrase inserted to change the rhythm. What syllable does this insertion refer to? It refers to the previous syllable in the line. There can be several such inserts, their number is not limited by the program itself (in the program code), but a significant number of inserts can significantly increase the duration of the calculation. \n\nWhen the results of the program are displayed on the screen, these inserts will also be displayed in the appropriate places. \n\nIf you specify _1, _10, _100, _1000, etc. as such an insertion, the program will assume that this insertion duration is equal to the duration of the syllable to which it refers. If the set of digits is preceded by a 0, the insertion has a shorter duration, if the 1 in the first 4 examples above is followed by digits other than 0, or if another digit is used instead of 1 or 0, the insertion has a longer duration. For example, _05 means exactly half the duration of the syllable, and _2 means double the duration. In any case the resulting values cannot be greater than 255, the greater ones are rounded to 255.\n\nFor the \"music\" mode the number of syllables printed for the line does include the inserts (since the version 0.15.2.0).\n"   | xs == "cm" = putStrLn "-cm \t— If present, the program works in a special comparative mode reading information from the several files line-by-line and prompting to choose the resulting option from the files given. If some files do not have such lines, then the resulting option for the file is empty. You choose the resulting option by typing its number on the terminal. In the version 0.16.0.0 the total number of sources is limited to no more than 14. For more information, please refer to the link: https://oleksandr-zhabenko.github.io/uk/rhythmicity/PhLADiPreLiO.Eng.21.html#comparative-mode-of-operation-c "   | otherwise = helpFE xs     where helpFE xs = mapM helpPrint js >> return ()

@@ -131,7 +131,7 @@  On the 08/03/2024 there is International Women's Day. -On the 12/03/2024 there was a Birthday of Emma Kok, the foundation founder. She turned 16. Therefore, the releases 0.20.0.0, 0.20.1.0 and 0.20.2.0 are additionally devoted i.e. tributed to her.+On the 12/03/2024 there was a Birthday of Emma Kok, the foundation founder. She turned 16. Therefore, the releases 0.20.0.0, 0.20.1.0, 0.20.2.0 and 0.20.2.1 are additionally devoted i.e. tributed to her.  Besides, you can support Ukrainian people in various forms. 

@@ -1,6 +1,6 @@ cabal-version:      2.4 name:               phladiprelio-ukrainian-simple-version:            0.20.2.0+version:            0.20.2.1  -- A short (one-line) description of the package. synopsis:           A PhLADiPreLiO implementation for Ukrainian that uses hashes and asynchronous concurrency.