megaparsec 9.6.1 → 9.8.2

raw patch · 21 files changed

Files

• CHANGELOG.md +76/−0
• README.md +117/−89
• Text/Megaparsec.hs +35/−31
• Text/Megaparsec/Byte.hs +3/−3
• Text/Megaparsec/Byte/Binary.hs +6/−6
• Text/Megaparsec/Byte/Lexer.hs +31/−31
• Text/Megaparsec/Char.hs +9/−9
• Text/Megaparsec/Char/Lexer.hs +48/−48
• Text/Megaparsec/Class.hs +30/−29
• Text/Megaparsec/Common.hs +3/−3
• Text/Megaparsec/Debug.hs +23/−23
• Text/Megaparsec/Error.hs +97/−41
• Text/Megaparsec/Error/Builder.hs +5/−6
• Text/Megaparsec/Internal.hs +50/−26
• Text/Megaparsec/Lexer.hs +10/−10
• Text/Megaparsec/Pos.hs +11/−12
• Text/Megaparsec/State.hs +11/−12
• Text/Megaparsec/Stream.hs +82/−53
• Text/Megaparsec/Unicode.hs +94/−0
• Text/Megaparsec/Unicode/Tables.hs +560/−0
• megaparsec.cabal +16/−11

@@ -1,5 +1,81 @@ *Megaparsec follows [SemVer](https://semver.org/).* +## Megaparsec 9.8.2++* Fixed tab expansion in the rendering of the offending line so that it+  takes into account the display width of the preceding characters.+  Previously a tab that followed a wide or zero-width character was expanded+  to the wrong number of spaces, which made the position marker `^`+  misaligned or missing.+* Fixed the regression introduced by the fix for the [issue+  412](https://github.com/mrkkrp/megaparsec/issues/412) which caused `(<|>)`+  to report a parse error at the position where the alternation started even+  when both of its branches had failed ahead of that position (which can+  happen because of `try`). Such an error mentioned a position that did not+  correspond to the unexpected item it reported and lost all expected items.+  In that case the longest match is now preferred again.+* Fixed `takeP` reporting that it had consumed input when asked to take zero+  (or a negative number of) tokens. Since it consumes nothing in that case,+  it now signals that fact, so that e.g. the second branch of `(<|>)` is+  still tried after it.+* Fixed column calculation for `ByteString` streams (strict and lazy) so+  that it agrees with the way the offending line is rendered. Previously the+  byte `0xad` was counted as one column even though it is displayed as a+  zero-width soft hyphen, which could shift the position marker `^` or make+  it disappear altogether.+* Updated the character width data used by `Text.Megaparsec.Unicode` to+  Unicode 17.0.0. The previous data was extracted from Unicode 12.0.0 and+  was moreover incomplete: it did not know about the CJK ideograph+  extensions G through I, about any of the emoji added since, or about most+  combining marks, including all of the variation selectors and everything+  outside of the Latin, Cyrillic, Hebrew, and Arabic scripts. As a result+  the position marker `^` did not line up with the offending line for input+  containing such characters.+* `isWideChar` now returns `False` for the few characters that are Wide+  according to their East Asian Width but are also combining marks, such as+  `U+302A`. They occupy no columns of their own, which `charLength` and+  `isZeroWidthChar` already reported.+* The position marker `^` is no longer omitted when the offending line turns+  out to be shorter than the column of the parse error.++## Megaparsec 9.8.1++* Fixed the regression introduced by the fix for the [issue+  572](https://github.com/mrkkrp/megaparsec/issues/572) which caused the+  position marker `^` to be missing in certain cases.+* This release officially supports GHC 9.6. This is the oldest GHC version+  we support at this time.++## Megaparsec 9.8.0++* Fixed the associativity of the `(<|>)` operator. [Issue+  412](https://github.com/mrkkrp/megaparsec/issues/412).+* Fixed the loss of precision in `decimal`, `binary`, `octal`, and+  `hexadecimal` functions in `Text.Megaparsec.Byte.Lexer` and+  `Text.Megaparsec.Char.Lexer` when they are used to parse floating point+  numbers. [Issue 479](https://github.com/mrkkrp/megaparsec/issues/479).+* Fixed handling of zero-width characters in error messages. To that end,+  added `isZeroWidthChar` function in `Text.Megaparsec.Unicode`. [Issue+  572](https://github.com/mrkkrp/megaparsec/issues/572).++## Megaparsec 9.7.1++* Typo fixes and compatibility with `QuickCheck >= 2.17` for+  `megaparsec-tests`.++## Megaparsec 9.7.0++* Implemented correct handling of wide Unicode characters in error messages.+  To that end, a new module `Text.Megaparsec.Unicode` was introduced. [Issue+  370](https://github.com/mrkkrp/megaparsec/issues/370).+* Inlined `Applicative` operators `(<*)` and `(*>)`. [PR+  566](https://github.com/mrkkrp/megaparsec/pull/566).+* `many` and `some` of the `Alternative` instance of `ParsecT` are now more+  efficient, since they use the monadic implementations under the hood.+  [Issue 567](https://github.com/mrkkrp/megaparsec/issues/567).+* Added `Text.Megaparsec.Error.errorBundlePrettyForGhcPreProcessors`. [PR+  573](https://github.com/mrkkrp/megaparsec/pull/573).+ ## Megaparsec 9.6.1  * Exposed `Text.Megaparsec.State`, so that the new functions (`initialState`

@@ -4,7 +4,7 @@ [![Hackage](https://img.shields.io/hackage/v/megaparsec.svg?style=flat)](https://hackage.haskell.org/package/megaparsec) [![Stackage Nightly](http://stackage.org/package/megaparsec/badge/nightly)](http://stackage.org/nightly/package/megaparsec) [![Stackage LTS](http://stackage.org/package/megaparsec/badge/lts)](http://stackage.org/lts/package/megaparsec)-![CI](https://github.com/mrkkrp/megaparsec/workflows/CI/badge.svg?branch=master)+[![CI](https://github.com/mrkkrp/megaparsec/actions/workflows/ci.yaml/badge.svg)](https://github.com/mrkkrp/megaparsec/actions/workflows/ci.yaml)  * [Features](#features)     * [Core features](#core-features)@@ -20,6 +20,7 @@     * [Megaparsec vs Parsec](#megaparsec-vs-parsec)     * [Megaparsec vs Trifecta](#megaparsec-vs-trifecta)     * [Megaparsec vs Earley](#megaparsec-vs-earley)+    * [Megaparsec vs Flatparse](#megaparsec-vs-flatparse) * [Related packages](#related-packages) * [Prominent projects that use Megaparsec](#prominent-projects-that-use-megaparsec) * [Links to announcements and blog posts](#links-to-announcements-and-blog-posts)@@ -27,56 +28,55 @@ * [License](#license)  This is an industrial-strength monadic parser combinator library. Megaparsec-is a feature-rich package that tries to find a nice balance between speed,-flexibility, and quality of parse errors.+is a feature-rich package that strikes a nice balance between speed,+flexibility, and the quality of parse errors.  ## Features -The project provides flexible solutions to satisfy common parsing needs. The-section describes them shortly. If you're looking for comprehensive+The project provides flexible solutions for common parsing needs. This+section describes them briefly. If you're looking for comprehensive documentation, see the [section about documentation](#documentation).  ### Core features -The package is built around `MonadParsec`, an MTL-style monad transformer.-Most features work with all instances of `MonadParsec`. One can achieve-various effects combining monad transformers, i.e. building a monadic stack.-Since the common monad transformers like `WriterT`, `StateT`, `ReaderT` and-others are instances of the `MonadParsec` type class, one can also wrap-`ParsecT` *in* these monads, achieving, for example, backtracking state.+The package is built around `MonadParsec`, an MTL-style type class. Most+features work with all instances of `MonadParsec`. You can achieve various+effects by combining monad transformers, i.e. by building a monadic stack.+Since the common monad transformers like `WriterT`, `StateT`, and `ReaderT`+are instances of the `MonadParsec` type class, you can also wrap `ParsecT`+*in* these monads, achieving, for example, backtracking state. -On the other hand `ParsecT` is an instance of many type classes as well. The-most useful ones are `Monad`, `Applicative`, `Alternative`, and-`MonadParsec`.+`ParsecT` is also an instance of many type classes itself. The most useful+ones are `Monad`, `Applicative`, `Alternative`, and `MonadParsec`.  Megaparsec includes all functionality that is typically available in Parsec-like libraries and also features some special combinators:  * `parseError` allows us to end parsing and report an arbitrary parse error.-* `withRecovery` can be used to recover from parse errors “on-the-fly” and-  continue parsing. Once parsing is finished, several parse errors may be-  reported or ignored altogether.+* `withRecovery` can be used to recover from parse errors “on the fly” and+  continue parsing. Once parsing is finished, the collected parse errors may+  be reported or ignored altogether. * `observing` makes it possible to “observe” parse errors without ending   parsing. -In addition to that, Megaparsec features high-performance combinators-similar to those found in [Attoparsec][attoparsec]:+In addition, Megaparsec features high-performance combinators similar to+those found in [Attoparsec][attoparsec]:  * `tokens` makes it easy to parse several tokens in a row (`string` and-  `string'` are built on top of this primitive). This is about 100 times-  faster than matching a string token by token. `tokens` returns “chunk” of-  original input, meaning that if you parse `Text`, it'll return `Text`-  without repacking.-* `takeWhile` and `takeWhile1` are about 150 times faster than approaches-  involving `many`, `manyTill` and other similar combinators.-* `takeP` allows us to grab n tokens from the stream and returns them as a+  `string'` are built on top of this primitive). It is about 100 times+  faster than matching a string token by token. `tokens` returns a “chunk”+  of the original input, meaning that if you parse `Text`, it'll return+  `Text` without repacking.+* `takeWhileP` and `takeWhile1P` are about 150 times faster than approaches+  involving `many`, `manyTill`, and other similar combinators.+* `takeP` allows us to grab `n` tokens from the stream and returns them as a   “chunk” of the stream.  Megaparsec is about as fast as Attoparsec if you write your parser carefully (see also [the section about performance](#performance)).  The library can currently work with the following types of input stream-out-of-the-box:+out of the box:  * `String = [Char]` * `ByteString` (strict and lazy)@@ -90,20 +90,19 @@ * Megaparsec has typed error messages and the ability to signal custom parse   errors that better suit the user's domain of interest. -* Since version 8, the location of parse errors can independent of current-  offset in the input stream. It is useful when you want a parse error to-  point to a particular position after performing some checks.+* The location of a parse error can be independent of the current offset in+  the input stream. This is useful when you want a parse error to point to a+  particular position after performing some checks. -* Instead of a single parse error Megaparsec produces so-called-  `ParseErrorBundle` data type that helps to manage multi-error messages and-  pretty-print them. Since version 8, reporting multiple parse errors at-  once has become easier.+* Instead of a single parse error, Megaparsec produces a `ParseErrorBundle`+  data type that helps manage multi-error messages and pretty-print them,+  making it easy to report multiple parse errors at once.  ### External lexers  Megaparsec works well with streams of tokens produced by tools like Alex.-The design of the `Stream` type class has been changed significantly in the-recent versions, but user can still work with custom streams of tokens.+The design of the `Stream` type class has changed significantly in recent+versions, but you can still work with custom streams of tokens.  ### Character and binary parsing @@ -119,13 +118,13 @@ “fixes” its particularly inflexible `Text.Parsec.Token`.  [`Text.Megaparsec.Char.Lexer`][tm-char-lexer] is intended to be imported-using a qualified import, it's not included in [`Text.Megaparsec`][tm]. The-module doesn't impose how you should write your parser, but certain-approaches may be more elegant than others. An especially important theme is-parsing of white space, comments, and indentation.+qualified, and it's not included in [`Text.Megaparsec`][tm]. The module+doesn't impose how you should write your parser, but certain approaches may+be more elegant than others. An especially important theme is the parsing of+white space, comments, and indentation. -The design of the module allows one quickly solve simple tasks and doesn't-get in the way when the need to implement something less standard arises.+The design of the module lets you solve simple tasks quickly and doesn't get+in the way when you need to implement something less standard.  [`Text.Megaparsec.Byte.Lexer`][tm-byte-lexer] is also available for users who wish to parse binary data.@@ -138,8 +137,7 @@ ## Tutorials  You can find the most complete Megaparsec tutorial [here][the-tutorial]. It-should provide sufficient guidance to help you start with your parsing-tasks.+should provide enough guidance to get you started with your parsing tasks.  ## Performance @@ -170,38 +168,37 @@  ## Comparison with other solutions -There are quite a few libraries that can be used for parsing in Haskell,-let's compare Megaparsec with some of them.+There are quite a few libraries that can be used for parsing in Haskell.+Let's compare Megaparsec with some of them.  ### Megaparsec vs Attoparsec  [Attoparsec][attoparsec] is another prominent Haskell library for parsing. Although both libraries deal with parsing, it's usually easy to decide which-you will need in particular project:+one you need for a particular project: -* *Attoparsec* is sometimes faster but not that feature-rich. It should be-  used when you want to process large amounts of data where performance-  matters more than quality of error messages.+* *Attoparsec* is sometimes faster but not as feature-rich. It should be used+  when you want to process large amounts of data and performance matters more+  than the quality of error messages. -* *Megaparsec* is good for parsing of source code or other human-readable-  texts. It has better error messages and it's implemented as a monad-  transformer.+* *Megaparsec* is good for parsing source code or other human-readable text.+  It has better error messages and is implemented as a monad transformer. -So, if you work with something human-readable where the size of input data-is moderate, it makes sense to go with Megaparsec, otherwise Attoparsec may-be a better choice.+In short, if you work with something human-readable where the size of the+input data is moderate, it makes sense to go with Megaparsec; otherwise+Attoparsec may be a better choice.  ### Megaparsec vs Parsec  Since Megaparsec is a fork of [Parsec][parsec], we are bound to list the main differences between the two libraries: -* Better error messages. Megaparsec has typed error messages and custom-  error messages, it can also report multiple parse errors at once.+* Better error messages. Megaparsec has typed and custom error messages, and+  it can also report multiple parse errors at once. -* Megaparsec can show the line on which parse error happened as part of-  parse error. This makes it a lot easier to figure out where the error-  happened.+* Megaparsec can include the line on which a parse error happened as part of+  the parse error. This makes it a lot easier to figure out where the error+  occurred.  * Some quirks and bugs of Parsec are fixed. @@ -215,17 +212,16 @@ * Megaparsec can recover from parse errors “on the fly” and continue   parsing. -* Megaparsec allows us to conditionally process parse errors inside a-  running parser. In particular, it's possible to define regions in which-  parse errors, should they happen, will get a “context tag”, e.g. we could-  build a context stack like “in function definition foo”, “in expression-  x”, etc.+* Megaparsec allows us to conditionally process parse errors inside a running+  parser. In particular, it's possible to define regions in which parse+  errors, should they happen, get a “context tag”. This lets us build a+  context stack like “in function definition foo”, “in expression x”, etc. -* Megaparsec is faster and supports efficient operations `tokens`,-  `takeWhileP`, `takeWhile1P`, `takeP`, like Attoparsec.+* Like Attoparsec, Megaparsec is faster and supports the efficient operations+  `tokens`, `takeWhileP`, `takeWhile1P`, and `takeP`. -If you want to see a detailed change log, `CHANGELOG.md` may be helpful.-Also see [this original announcement][original-announcement] for another+If you want to see a detailed change log, `CHANGELOG.md` may be helpful. Also+see [this original announcement][original-announcement] for another comparison.  ### Megaparsec vs Trifecta@@ -234,43 +230,67 @@ messages. These are the common reasons why Trifecta may be problematic to use: -* Complicated, doesn't have any tutorials available, and documentation+* It is complicated, has no tutorials available, and its documentation   doesn't help much.  * Trifecta can parse `String` and `ByteString` natively, but not `Text`. -* Depends on `lens`, which is a very heavy dependency. If you're not into+* It depends on `lens`, which is a very heavy dependency. If you're not into   `lens`, you may not like the API. -[Idris][idris] has switched from Trifecta to Megaparsec which allowed it to+[Idris][idris] switched from Trifecta to Megaparsec, which allowed it to [have better error messages and fewer dependencies][idris-testimony].  ### Megaparsec vs Earley  [Earley][earley] is a newer library that allows us to safely parse-context-free grammars (CFG). Megaparsec is a lower-level library compared to+context-free grammars (CFGs). Megaparsec is a lower-level library compared to Earley, but there are still enough reasons to choose it:  * Megaparsec is faster. -* Your grammar may be not context-free or you may want introduce some sort-  of state to the parsing process. Almost all non-trivial parsers require-  state. Even if your grammar is context-free, state may allow for+* Your grammar may not be context-free, or you may want to introduce some+  sort of state into the parsing process. Almost all non-trivial parsers+  require state. Even if your grammar is context-free, state may allow for   additional niceties. Earley does not support that. -* Megaparsec's error messages are more flexible allowing to include+* Megaparsec's error messages are more flexible, allowing you to include   arbitrary data in them, return multiple error messages, mark regions that-  affect any error that happens in those regions, etc.+  affect any error that happens within them, etc.  In other words, Megaparsec is less safe but also more powerful. +### Megaparsec vs Flatparse++[Flatparse][flatparse] is a newer library that focuses squarely on raw+parsing speed. On microbenchmarks it can be several times faster than both+Megaparsec and Attoparsec, and it produces considerably smaller object code.+It achieves this by making a number of trade-offs:++* Flatparse works only with strict `ByteString`. It does not support `Text`,+  `String`, lazy input, or incremental parsing, whereas Megaparsec works with+  all of these and with custom token streams via the `Stream` type class.++* Flatparse provides only a low-level interface to error handling and source+  positions. Megaparsec has typed, custom, and multi-error messages out of+  the box, along with error recovery and context-tagged regions.++* Flatparse distinguishes recoverable failures from unrecoverable errors and+  leaves grammar and error propagation largely up to you, so it sits at a+  lower level of abstraction than Megaparsec.++In short, if you need the absolute best performance and are willing to work+at a lower level with `ByteString` only, Flatparse is worth a look.+Megaparsec is the better choice when you value error messages, flexibility,+and support for a variety of input streams.+ ## Related packages  The following packages are designed to be used with Megaparsec (open a PR if you want to add something to the list):  * [`hspec-megaparsec`](https://hackage.haskell.org/package/hspec-megaparsec)—utilities-  for testing Megaparsec parsers with with+  for testing Megaparsec parsers with   [Hspec](https://hackage.haskell.org/package/hspec). * [`replace-megaparsec`](https://hackage.haskell.org/package/replace-megaparsec)—Stream   editing and find-and-replace with Megaparsec.@@ -283,13 +303,22 @@   Megaparsec. * [`parser-combinators`](https://hackage.haskell.org/package/parser-combinators)—provides permutation and expression parsers [previously bundled with Megaparsec](https://markkarpov.com/post/megaparsec-7.html#parsercombinators-grows-megaparsec-shrinks). * [`faster-megaparsec`](https://hackage.haskell.org/package/faster-megaparsec)—speeds up parsing-  by trying a simple `MonadParsec` instance and falls back to `ParsecT` to report errors.+  by trying a simple `MonadParsec` instance and falling back to `ParsecT` to report errors.+* [`parsers-megaparsec`](https://hackage.haskell.org/package/parsers-megaparsec)—provides+  instances of the [`parsers`](https://hackage.haskell.org/package/parsers)+  type classes (`Parsing`, `CharParsing`, `LookAheadParsing`, and+  `TokenParsing`) for Megaparsec.+* [`headed-megaparsec`](https://hackage.haskell.org/package/headed-megaparsec)—helps+  produce more informative parsers by distinguishing a parser's “head” from+  its “body”.+* [`htoml-megaparsec`](https://hackage.haskell.org/package/htoml-megaparsec)—a+  parser for [TOML](https://toml.io) files built with Megaparsec.  ## Prominent projects that use Megaparsec  Some prominent projects that use Megaparsec: -* [Idris](https://github.com/idris-lang/Idris-dev)—a general-purpose+* [Idris](https://github.com/idris-lang/Idris2)—a general-purpose   functional programming language with dependent types * [Dhall](https://github.com/dhall-lang/dhall-haskell)—an advanced   configuration language@@ -301,8 +330,8 @@  ## Links to announcements and blog posts -Here are some blog posts mainly announcing new features of the project and-describing what sort of things are now possible:+Here are some blog posts, mainly announcing new features of the project and+describing what sort of things they make possible:  * [Megaparsec 8](https://markkarpov.com/post/megaparsec-8.html) * [Megaparsec 7](https://markkarpov.com/post/megaparsec-7.html)@@ -315,8 +344,8 @@  ## Contribution -Issues (bugs, feature requests or otherwise feedback) may be reported in-[the GitHub issue tracker for this+Issues (bugs, feature requests, or other feedback) may be reported in [the+GitHub issue tracker for this project](https://github.com/mrkkrp/megaparsec/issues).  Pull requests are also welcome. If you would like to contribute to the@@ -344,9 +373,8 @@ [parsec]: https://hackage.haskell.org/package/parsec [trifecta]: https://hackage.haskell.org/package/trifecta [earley]: https://hackage.haskell.org/package/Earley+[flatparse]: https://hackage.haskell.org/package/flatparse [idris]: https://www.idris-lang.org/-[idris-testimony]: https://twitter.com/edwinbrady/status/950084043282010117?s=09+[idris-testimony]: https://x.com/edwinbrady/status/950084043282010117 -[parsers-bench]: https://github.com/mrkkrp/parsers-bench-[fast-parser]: https://markkarpov.com/megaparsec/writing-a-fast-parser.html [original-announcement]: https://mail.haskell.org/pipermail/haskell-cafe/2015-September/121530.html

@@ -23,8 +23,8 @@ -- at the tutorial <https://markkarpov.com/tutorial/megaparsec.html>. -- -- In addition to the "Text.Megaparsec" module, which exports and re-exports--- almost everything that you may need, we advise to import--- "Text.Megaparsec.Char" if you plan to work with a stream of 'Char' tokens+-- almost everything that you may need, we advise importing+-- "Text.Megaparsec.Char" if you plan to work with a stream of 'Char' tokens, -- or "Text.Megaparsec.Byte" if you intend to parse binary data. -- -- It is common to start working with the library by defining a type synonym@@ -36,9 +36,9 @@ -- > Custom error component    Input stream type -- -- Then you can write type signatures like @Parser 'Int'@—for a parser that--- returns an 'Int' for example.+-- returns an 'Int', for example. ----- Similarly (since it's known to cause confusion), you should use+-- Similarly (since it's known to cause confusion), you should use the -- 'ParseErrorBundle' type parametrized like this: -- -- > ParseErrorBundle Text Void@@ -47,7 +47,7 @@ -- >  Input stream type    Custom error component (the same you used in Parser) -- -- Megaparsec uses some type-level machinery to provide flexibility without--- compromising on type safety. Thus type signatures are sometimes necessary+-- compromising on type safety. Thus, type signatures are sometimes necessary -- to avoid ambiguous types. If you're seeing an error message that reads -- like “Type variable @e0@ is ambiguous …”, you need to give an explicit -- signature to your parser to resolve the ambiguity. It's a good idea to@@ -130,12 +130,16 @@ -- -- Note that we re-export monadic combinators from -- "Control.Monad.Combinators" because these are more efficient than--- 'Applicative'-based ones. Thus 'many' and 'some' may clash with the--- functions from "Control.Applicative". You need to hide the functions like+-- 'Applicative'-based ones (†). Thus 'many' and 'some' may clash with the+-- functions from "Control.Applicative". You need to hide those functions like -- this: -- -- > import Control.Applicative hiding (many, some) --+-- † As of Megaparsec 9.7.0 'Control.Applicative.many' and+-- 'Control.Applicative.some' are as efficient as their monadic+-- counterparts.+-- -- Also note that you can import "Control.Monad.Combinators.NonEmpty" if you -- wish that combinators like 'some' return 'NonEmpty' lists. The module -- lives in the @parser-combinators@ package (you need at least version@@ -148,7 +152,7 @@ -- Other modules of interest are: -- --     * "Control.Monad.Combinators.Expr" for parsing of expressions.---     * "Control.Applicative.Permutations" for parsing of permutations+--     * "Control.Applicative.Permutations" for parsing of permutation --       phrases.  ----------------------------------------------------------------------------@@ -192,8 +196,8 @@ -- will fail. -- -- The function is supposed to be useful for lightweight parsing, where--- error messages (and thus file names) are not important and entire input--- should be consumed. For example, it can be used for parsing of a single+-- error messages (and thus file names) are not important and the entire+-- input should be consumed. For example, it can be used for parsing a single -- number according to a specification of its format. parseMaybe :: (Ord e, Stream s) => Parsec e s a -> s -> Maybe a parseMaybe p s =@@ -237,8 +241,8 @@   Either (ParseErrorBundle s e) a runParser p name s = snd $ runParser' p (initialState name s) --- | The function is similar to 'runParser' with the difference that it--- accepts and returns the parser state. This allows us e.g. to specify+-- | The function is similar to 'runParser', with the difference that it+-- accepts and returns the parser state. This allows us, e.g., to specify an -- arbitrary textual position at the beginning of parsing. This is the most -- general way to run a parser over the 'Identity' monad. --@@ -300,10 +304,10 @@  -- $parse-errors ----- The most general function to fail and end parsing is 'parseError'. These--- are built on top of it. The section also includes functions starting with--- the @register@ prefix which allow users to register “delayed”--- 'ParseError's.+-- The most general function to fail and end parsing is 'parseError'. The+-- others are built on top of it. This section also includes functions+-- starting with the @register@ prefix, which allow users to register+-- “delayed” 'ParseError's.  -- | Stop parsing and report a trivial 'ParseError'. --@@ -334,8 +338,8 @@   parseError (FancyError o xs) {-# INLINE fancyFailure #-} --- | The parser @'unexpected' item@ fails with an error message telling--- about unexpected item @item@ without consuming any input.+-- | The parser @'unexpected' item@ fails with an error message telling the+-- user about the unexpected item @item@ without consuming any input. -- -- > unexpected item = failure (Just item) Set.empty unexpected :: (MonadParsec e s m) => ErrorItem (Token s) -> m a@@ -355,8 +359,8 @@ -- | Specify how to process 'ParseError's that happen inside of this -- wrapper. This applies to both normal and delayed 'ParseError's. ----- As a side-effect of the implementation the inner computation will start--- with an empty collection of delayed errors and they will be updated and+-- As a side effect of the implementation, the inner computation will start+-- with an empty collection of delayed errors, and they will be updated and -- “restored” on the way out of 'region'. -- -- @since 5.3.0@@ -382,8 +386,8 @@ -- | Register a 'ParseError' for later reporting. This action does not end -- parsing and has no effect except for adding the given 'ParseError' to the -- collection of “delayed” 'ParseError's which will be taken into--- consideration at the end of parsing. Only if this collection is empty the--- parser will succeed. This is the main way to report several parse errors+-- consideration at the end of parsing. Only if this collection is empty will+-- the parser succeed. This is the main way to report several parse errors -- at once. -- -- @since 8.0.0@@ -516,10 +520,10 @@   -- | Collection of matching tokens   f (Token s) ->   m (Token s)-oneOf cs = satisfy (`elem` cs)+oneOf cs = satisfy (\x -> elem x cs) {-# INLINE oneOf #-} --- | As the dual of 'oneOf', @'noneOf' ts@ succeeds if the current token+-- | As the dual of 'oneOf', @'noneOf' ts@ succeeds if the current token is -- /not/ in the supplied list of tokens @ts@. Returns the parsed character. -- Note that this parser cannot automatically generate the “expected” -- component of error message, so usually you should label it manually with@@ -535,10 +539,10 @@ -- @since 7.0.0 noneOf ::   (Foldable f, MonadParsec e s m) =>-  -- | Collection of taken we should not match+  -- | Collection of tokens we should not match   f (Token s) ->   m (Token s)-noneOf cs = satisfy (`notElem` cs)+noneOf cs = satisfy (\x -> notElem x cs) {-# INLINE noneOf #-}  -- | @'chunk' chk@ only matches the chunk @chk@.@@ -564,10 +568,10 @@ (<?>) = flip label {-# INLINE (<?>) #-} --- | Return both the result of a parse and a chunk of input that was+-- | Return both the result of a parse and the chunk of input that was -- consumed during parsing. This relies on the change of the 'stateOffset' -- value to evaluate how many tokens were consumed. If you mess with it--- manually in the argument parser, prepare for troubles.+-- manually in the argument parser, prepare for trouble. -- -- @since 5.3.0 match :: (MonadParsec e s m) => m a -> m (Tokens s, a)@@ -616,9 +620,9 @@ setInput s = updateParserState (\(State _ o pst de) -> State s o pst de) {-# INLINE setInput #-} --- | Return the current source position. This function /is not cheap/, do--- not call it e.g. on matching of every token, that's a bad idea. Still you--- can use it to get 'SourcePos' to attach to things that you parse.+-- | Return the current source position. This function /is not cheap/, so do+-- not call it, e.g., on matching of every token—that's a bad idea. Still,+-- you can use it to get a 'SourcePos' to attach to things that you parse. -- -- The function works under the assumption that we move in the input stream -- only forwards and never backwards, which is always true unless the user

@@ -143,18 +143,18 @@ letterChar = satisfy (isLetter . toChar) <?> "letter" {-# INLINE letterChar #-} --- | Parse an alphabetic or digit characters.+-- | Parse an alphabetic or digit character. alphaNumChar :: (MonadParsec e s m, Token s ~ Word8) => m (Token s) alphaNumChar = satisfy (isAlphaNum . toChar) <?> "alphanumeric character" {-# INLINE alphaNumChar #-} --- | Parse a printable character: letter, number, mark, punctuation, symbol+-- | Parse a printable character: letter, number, mark, punctuation, symbol, -- or space. printChar :: (MonadParsec e s m, Token s ~ Word8) => m (Token s) printChar = satisfy (isPrint . toChar) <?> "printable character" {-# INLINE printChar #-} --- | Parse an ASCII digit, i.e between “0” and “9”.+-- | Parse an ASCII digit, i.e. between “0” and “9”. digitChar :: (MonadParsec e s m, Token s ~ Word8) => m (Token s) digitChar = satisfy isDigit' <?> "digit"   where

@@ -50,7 +50,7 @@ import Data.Word import Text.Megaparsec --- | Data types that can be converted to little- or big- endian numbers.+-- | Data types that can be converted to little- or big-endian numbers. class BinaryChunk chunk where   convertChunkBE :: (Bits a, Num a) => chunk -> a   convertChunkLE :: (Bits a, Num a) => chunk -> a@@ -132,18 +132,18 @@  -- | Parse a little-endian 'Word64'. word64le :: (MonadParsec e s m, BinaryChunk (Tokens s)) => m Word64-word64le = anyLE (Just "little-endian 64 word")+word64le = anyLE (Just "little-endian 64 bit word") {-# INLINE word64le #-}  -- | Parse a big-endian 'Word64'. word64be :: (MonadParsec e s m, BinaryChunk (Tokens s)) => m Word64-word64be = anyBE (Just "big-endian 64 word")+word64be = anyBE (Just "big-endian 64 bit word") {-# INLINE word64be #-}  ---------------------------------------------------------------------------- -- Parsing signed values --- | Parse a 'Int8'.+-- | Parse an 'Int8'. int8 :: (MonadParsec e s m, BinaryChunk (Tokens s)) => m Int8 int8 = anyBE (Just "8 bit int") {-# INLINE int8 #-}@@ -170,12 +170,12 @@  -- | Parse a little-endian 'Int64'. int64le :: (MonadParsec e s m, BinaryChunk (Tokens s)) => m Int64-int64le = anyLE (Just "little-endian 64 int")+int64le = anyLE (Just "little-endian 64 bit int") {-# INLINE int64le #-}  -- | Parse a big-endian 'Int64'. int64be :: (MonadParsec e s m, BinaryChunk (Tokens s)) => m Int64-int64be = anyBE (Just "big-endian 64 int")+int64be = anyBE (Just "big-endian 64 bit int") {-# INLINE int64be #-}  --------------------------------------------------------------------------------

@@ -41,7 +41,7 @@  import Control.Applicative import Data.Functor (void)-import Data.List (foldl')+import qualified Data.List import Data.Proxy import Data.Scientific (Scientific) import qualified Data.Scientific as Sci@@ -53,10 +53,10 @@ ---------------------------------------------------------------------------- -- White space --- | Given a comment prefix this function returns a parser that skips line+-- | Given a comment prefix, this function returns a parser that skips line -- comments. Note that it stops just before the newline character but--- doesn't consume the newline. Newline is either supposed to be consumed by--- 'space' parser or picked up manually.+-- doesn't consume the newline. The newline is supposed to be either consumed+-- by the 'space' parser or picked up manually. skipLineComment ::   (MonadParsec e s m, Token s ~ Word8) =>   -- | Line comment prefix@@ -66,7 +66,7 @@   B.string prefix *> void (takeWhileP (Just "character") (/= 10)) {-# INLINEABLE skipLineComment #-} --- | @'skipBlockComment' start end@ skips non-nested block comment starting+-- | @'skipBlockComment' start end@ skips a non-nested block comment starting -- with @start@ and ending with @end@. skipBlockComment ::   (MonadParsec e s m) =>@@ -81,7 +81,7 @@     n = B.string end {-# INLINEABLE skipBlockComment #-} --- | @'skipBlockCommentNested' start end@ skips possibly nested block+-- | @'skipBlockCommentNested' start end@ skips a possibly nested block -- comment starting with @start@ and ending with @end@. -- -- @since 5.0.0@@ -122,14 +122,14 @@   m a decimal_ = mkNum <$> takeWhile1P (Just "digit") isDigit   where-    mkNum = foldl' step 0 . chunkToTokens (Proxy :: Proxy s)+    mkNum = fromInteger . Data.List.foldl' step 0 . chunkToTokens (Proxy :: Proxy s)     step a w = a * 10 + fromIntegral (w - 48) {-# INLINE decimal_ #-}  -- | Parse an integer in the binary representation. The binary number is -- expected to be a non-empty sequence of zeroes “0” and ones “1”. ----- You could of course parse some prefix before the actual number:+-- You could, of course, parse some prefix before the actual number: -- -- > binary = char 48 >> char' 98 >> L.binary --@@ -145,18 +145,18 @@     <$> takeWhile1P Nothing isBinDigit     <?> "binary integer"   where-    mkNum = foldl' step 0 . chunkToTokens (Proxy :: Proxy s)+    mkNum = fromInteger . Data.List.foldl' step 0 . chunkToTokens (Proxy :: Proxy s)     step a w = a * 2 + fromIntegral (w - 48)     isBinDigit w = w == 48 || w == 49 {-# INLINEABLE binary #-}  -- | Parse an integer in the octal representation. The format of the octal--- number is expected to be according to the Haskell report except for the--- fact that this parser doesn't parse “0o” or “0O” prefix. It is a--- responsibility of the programmer to parse correct prefix before parsing--- the number itself.+-- number is expected to be according to the Haskell report, except for the+-- fact that this parser doesn't parse the “0o” or “0O” prefix. It is the+-- responsibility of the programmer to parse the correct prefix before+-- parsing the number itself. ----- For example you can make it conform to the Haskell report like this:+-- For example, you can make it conform to the Haskell report like this: -- -- > octal = char 48 >> char' 111 >> L.octal --@@ -170,18 +170,18 @@     <$> takeWhile1P Nothing isOctDigit     <?> "octal integer"   where-    mkNum = foldl' step 0 . chunkToTokens (Proxy :: Proxy s)+    mkNum = fromInteger . Data.List.foldl' step 0 . chunkToTokens (Proxy :: Proxy s)     step a w = a * 8 + fromIntegral (w - 48)     isOctDigit w = w - 48 < 8 {-# INLINEABLE octal #-}  -- | Parse an integer in the hexadecimal representation. The format of the--- hexadecimal number is expected to be according to the Haskell report--- except for the fact that this parser doesn't parse “0x” or “0X” prefix.--- It is a responsibility of the programmer to parse correct prefix before--- parsing the number itself.+-- hexadecimal number is expected to be according to the Haskell report,+-- except for the fact that this parser doesn't parse the “0x” or “0X”+-- prefix. It is the responsibility of the programmer to parse the correct+-- prefix before parsing the number itself. ----- For example you can make it conform to the Haskell report like this:+-- For example, you can make it conform to the Haskell report like this: -- -- > hexadecimal = char 48 >> char' 120 >> L.hexadecimal --@@ -195,7 +195,7 @@     <$> takeWhile1P Nothing isHexDigit     <?> "hexadecimal integer"   where-    mkNum = foldl' step 0 . chunkToTokens (Proxy :: Proxy s)+    mkNum = fromInteger . Data.List.foldl' step 0 . chunkToTokens (Proxy :: Proxy s)     step a w       | w >= 48 && w <= 57 = a * 16 + fromIntegral (w - 48)       | w >= 97 = a * 16 + fromIntegral (w - 87)@@ -207,14 +207,14 @@ {-# INLINEABLE hexadecimal #-}  -- | Parse a floating point value as a 'Scientific' number. 'Scientific' is--- great for parsing of arbitrary precision numbers coming from an untrusted--- source. See documentation in "Data.Scientific" for more information.+-- great for parsing arbitrary-precision numbers coming from an untrusted+-- source. See the documentation in "Data.Scientific" for more information. -- -- The parser can be used to parse integers or floating point values. Use -- functions like 'Data.Scientific.floatingOrInteger' from "Data.Scientific" -- to test and extract integer or real values. ----- This function does not parse sign, if you need to parse signed numbers,+-- This function does not parse a sign; if you need to parse signed numbers, -- see 'signed'. scientific ::   forall e s m.@@ -232,7 +232,7 @@ -- | Parse a floating point number according to the syntax for floating -- point literals described in the Haskell report. ----- This function does not parse sign, if you need to parse signed numbers,+-- This function does not parse a sign; if you need to parse signed numbers, -- see 'signed'. -- -- __Note__: in versions /6.0.0/–/6.1.1/ this function accepted plain integers.@@ -256,7 +256,7 @@   m SP dotDecimal_ pxy c' = do   void (B.char 46)-  let mkNum = foldl' step (SP c' 0) . chunkToTokens pxy+  let mkNum = Data.List.foldl' step (SP c' 0) . chunkToTokens pxy       step (SP a e') w =         SP           (a * 10 + fromIntegral (w - 48))@@ -273,13 +273,13 @@   (+ e') <$> signed (return ()) decimal_ {-# INLINE exponent_ #-} --- | @'signed' space p@ parser parses an optional sign character (“+” or--- “-”), then if there is a sign it consumes optional white space (using--- @space@ parser), then it runs parser @p@ which should return a number.--- Sign of the number is changed according to the previously parsed sign+-- | @'signed' space p@ parses an optional sign character (“+” or “-”), then,+-- if there is a sign, it consumes optional white space (using the @space@+-- parser), then it runs the parser @p@, which should return a number. The+-- sign of the number is changed according to the previously parsed sign -- character. ----- For example, to parse signed integer you can write:+-- For example, to parse a signed integer you can write: -- -- > lexeme        = L.lexeme spaceConsumer -- > integer       = lexeme L.decimal

@@ -158,7 +158,7 @@ letterChar = satisfy isLetter <?> "letter" {-# INLINE letterChar #-} --- | Parse an alphabetic or numeric digit Unicode characters.+-- | Parse an alphabetic or numeric digit Unicode character. -- -- Note that the numeric digits outside the ASCII range are parsed by this -- parser but not by 'digitChar'. Such digits may be part of identifiers but@@ -168,12 +168,12 @@ {-# INLINE alphaNumChar #-}  -- | Parse a printable Unicode character: letter, number, mark, punctuation,--- symbol or space.+-- symbol, or space. printChar :: (MonadParsec e s m, Token s ~ Char) => m (Token s) printChar = satisfy isPrint <?> "printable character" {-# INLINE printChar #-} --- | Parse an ASCII digit, i.e between “0” and “9”.+-- | Parse an ASCII digit, i.e. between “0” and “9”. digitChar :: (MonadParsec e s m, Token s ~ Char) => m (Token s) digitChar = satisfy isDigit <?> "digit" {-# INLINE digitChar #-}@@ -211,18 +211,18 @@ {-# INLINE numberChar #-}  -- | Parse a Unicode punctuation character, including various kinds of--- connectors, brackets and quotes.+-- connectors, brackets, and quotes. punctuationChar :: (MonadParsec e s m, Token s ~ Char) => m (Token s) punctuationChar = satisfy isPunctuation <?> "punctuation" {-# INLINE punctuationChar #-} --- | Parse a Unicode symbol characters, including mathematical and currency+-- | Parse a Unicode symbol character, including mathematical and currency -- symbols. symbolChar :: (MonadParsec e s m, Token s ~ Char) => m (Token s) symbolChar = satisfy isSymbol <?> "symbol" {-# INLINE symbolChar #-} --- | Parse a Unicode space and separator characters.+-- | Parse a Unicode space or separator character. separatorChar :: (MonadParsec e s m, Token s ~ Char) => m (Token s) separatorChar = satisfy isSeparator <?> "separator" {-# INLINE separatorChar #-}@@ -239,8 +239,8 @@ latin1Char = satisfy isLatin1 <?> "Latin-1 character" {-# INLINE latin1Char #-} --- | @'charCategory' cat@ parses character in Unicode General Category--- @cat@, see 'Data.Char.GeneralCategory'.+-- | @'charCategory' cat@ parses a character in the Unicode General Category+-- @cat@; see 'Data.Char.GeneralCategory'. charCategory ::   (MonadParsec e s m, Token s ~ Char) =>   GeneralCategory ->@@ -248,7 +248,7 @@ charCategory cat = satisfy ((== cat) . generalCategory) <?> categoryName cat {-# INLINE charCategory #-} --- | Return the human-readable name of Unicode General Category.+-- | Return the human-readable name of a Unicode General Category. categoryName :: GeneralCategory -> String categoryName = \case   UppercaseLetter -> "uppercase letter"

@@ -69,7 +69,7 @@ import Control.Applicative import Control.Monad (void) import qualified Data.Char as Char-import Data.List (foldl')+import qualified Data.List import Data.List.NonEmpty (NonEmpty (..)) import Data.Maybe (fromMaybe, isJust, listToMaybe) import Data.Proxy@@ -83,10 +83,10 @@ ---------------------------------------------------------------------------- -- White space --- | Given a comment prefix this function returns a parser that skips line+-- | Given a comment prefix, this function returns a parser that skips line -- comments. Note that it stops just before the newline character but--- doesn't consume the newline. Newline is either supposed to be consumed by--- 'space' parser or picked up manually.+-- doesn't consume the newline. The newline is supposed to be either consumed+-- by the 'space' parser or picked up manually. skipLineComment ::   (MonadParsec e s m, Token s ~ Char) =>   -- | Line comment prefix@@ -96,7 +96,7 @@   C.string prefix *> void (takeWhileP (Just "character") (/= '\n')) {-# INLINEABLE skipLineComment #-} --- | @'skipBlockComment' start end@ skips non-nested block comment starting+-- | @'skipBlockComment' start end@ skips a non-nested block comment starting -- with @start@ and ending with @end@. skipBlockComment ::   (MonadParsec e s m) =>@@ -111,7 +111,7 @@     n = C.string end {-# INLINEABLE skipBlockComment #-} --- | @'skipBlockCommentNested' start end@ skips possibly nested block+-- | @'skipBlockCommentNested' start end@ skips a possibly nested block -- comment starting with @start@ and ending with @end@. -- -- @since 5.0.0@@ -143,8 +143,8 @@ indentLevel = sourceColumn <$> getSourcePos {-# INLINE indentLevel #-} --- | Fail reporting incorrect indentation error. The error has attached--- information:+-- | Fail, reporting an incorrect indentation error. The error has the+-- following attached information: -- --     * Desired ordering between reference level and actual level --     * Reference indentation level@@ -166,15 +166,16 @@ {-# INLINEABLE incorrectIndent #-}  -- | @'indentGuard' spaceConsumer ord ref@ first consumes all white space--- (indentation) with @spaceConsumer@ parser, then it checks the column--- position. Ordering between current indentation level and the reference--- indentation level @ref@ should be @ord@, otherwise the parser fails. On--- success the current column position is returned.+-- (indentation) with the @spaceConsumer@ parser, then it checks the column+-- position. The ordering between the current indentation level and the+-- reference indentation level @ref@ should be @ord@, otherwise the parser+-- fails. On success the current column position is returned. -- -- When you want to parse a block of indentation, first run this parser with -- arguments like @'indentGuard' spaceConsumer 'GT' 'pos1'@—this will make--- sure you have some indentation. Use returned value to check indentation--- on every subsequent line according to syntax of your language.+-- sure you have some indentation. Use the returned value to check+-- indentation on every subsequent line according to the syntax of your+-- language. indentGuard ::   (TraversableStream s, MonadParsec e s m) =>   -- | How to consume indentation (white space)@@ -194,7 +195,7 @@ {-# INLINEABLE indentGuard #-}  -- | Parse a non-indented construction. This ensures that there is no--- indentation before actual data. Useful, for example, as a wrapper for+-- indentation before the actual data. Useful, for example, as a wrapper for -- top-level function definitions. -- -- @since 4.3.0@@ -208,8 +209,7 @@ nonIndented sc p = indentGuard sc EQ pos1 *> p {-# INLINEABLE nonIndented #-} --- | Behaviors for parsing of indented tokens. This is used in--- 'indentBlock', which see.+-- | Behaviors for parsing of indented tokens. This is used in 'indentBlock'. -- -- @since 4.3.0 data IndentOpt m a b@@ -226,7 +226,7 @@  -- | Parse a “reference” token and a number of other tokens that have a -- greater (but the same for all of them) level of indentation than that of--- the “reference” token. The reference token can influence parsing, see+-- the “reference” token. The reference token can influence parsing; see -- 'IndentOpt' for more information. -- -- __Note__: the first argument of this function /must/ consume newlines@@ -265,7 +265,7 @@       f (x : xs) {-# INLINEABLE indentBlock #-} --- | Grab indented items. This is a helper for 'indentBlock', it's not a+-- | Grab indented items. This is a helper for 'indentBlock'; it's not a -- part of the public API. indentedItems ::   (TraversableStream s, MonadParsec e s m) =>@@ -293,10 +293,10 @@             | otherwise -> incorrectIndent EQ lvl pos  -- | Create a parser that supports line-folding. The first argument is used--- to consume white space between components of line fold, thus it /must/+-- to consume white space between components of a line fold, thus it /must/ -- consume newlines in order to work properly. The second argument is a -- callback that receives a custom space-consuming parser as an argument.--- This parser should be used after separate components of line fold that+-- This parser should be used after separate components of the line fold that -- can be put on different lines. -- -- An example should clarify the usage pattern:@@ -357,8 +357,8 @@ -- -- If you need to parse signed integers, see the 'signed' combinator. ----- __Note__: before the version /6.0.0/ the function returned 'Integer',--- i.e. it wasn't polymorphic in its return type.+-- __Note__: before version /6.0.0/ the function returned 'Integer', i.e. it+-- wasn't polymorphic in its return type. -- -- __Warning__: this function does not perform range checks. decimal :: (MonadParsec e s m, Token s ~ Char, Num a) => m a@@ -372,14 +372,14 @@   m a decimal_ = mkNum <$> takeWhile1P (Just "digit") Char.isDigit   where-    mkNum = foldl' step 0 . chunkToTokens (Proxy :: Proxy s)+    mkNum = fromInteger . Data.List.foldl' step 0 . chunkToTokens (Proxy :: Proxy s)     step a c = a * 10 + fromIntegral (Char.digitToInt c) {-# INLINE decimal_ #-}  -- | Parse an integer in binary representation. The binary number is -- expected to be a non-empty sequence of zeroes “0” and ones “1”. ----- You could of course parse some prefix before the actual number:+-- You could, of course, parse some prefix before the actual number: -- -- > binary = char '0' >> char' 'b' >> L.binary --@@ -395,18 +395,18 @@     <$> takeWhile1P Nothing isBinDigit     <?> "binary integer"   where-    mkNum = foldl' step 0 . chunkToTokens (Proxy :: Proxy s)+    mkNum = fromInteger . Data.List.foldl' step 0 . chunkToTokens (Proxy :: Proxy s)     step a c = a * 2 + fromIntegral (Char.digitToInt c)     isBinDigit x = x == '0' || x == '1' {-# INLINEABLE binary #-}  -- | Parse an integer in the octal representation. The format of the octal--- number is expected to be according to the Haskell report except for the--- fact that this parser doesn't parse “0o” or “0O” prefix. It is a--- responsibility of the programmer to parse correct prefix before parsing--- the number itself.+-- number is expected to be according to the Haskell report, except for the+-- fact that this parser doesn't parse the “0o” or “0O” prefix. It is the+-- responsibility of the programmer to parse the correct prefix before+-- parsing the number itself. ----- For example you can make it conform to the Haskell report like this:+-- For example, you can make it conform to the Haskell report like this: -- -- > octal = char '0' >> char' 'o' >> L.octal --@@ -423,17 +423,17 @@     <$> takeWhile1P Nothing Char.isOctDigit     <?> "octal integer"   where-    mkNum = foldl' step 0 . chunkToTokens (Proxy :: Proxy s)+    mkNum = fromInteger . Data.List.foldl' step 0 . chunkToTokens (Proxy :: Proxy s)     step a c = a * 8 + fromIntegral (Char.digitToInt c) {-# INLINEABLE octal #-}  -- | Parse an integer in the hexadecimal representation. The format of the--- hexadecimal number is expected to be according to the Haskell report--- except for the fact that this parser doesn't parse “0x” or “0X” prefix.--- It is a responsibility of the programmer to parse correct prefix before--- parsing the number itself.+-- hexadecimal number is expected to be according to the Haskell report,+-- except for the fact that this parser doesn't parse the “0x” or “0X”+-- prefix. It is the responsibility of the programmer to parse the correct+-- prefix before parsing the number itself. ----- For example you can make it conform to the Haskell report like this:+-- For example, you can make it conform to the Haskell report like this: -- -- > hexadecimal = char '0' >> char' 'x' >> L.hexadecimal --@@ -450,19 +450,19 @@     <$> takeWhile1P Nothing Char.isHexDigit     <?> "hexadecimal integer"   where-    mkNum = foldl' step 0 . chunkToTokens (Proxy :: Proxy s)+    mkNum = fromInteger . Data.List.foldl' step 0 . chunkToTokens (Proxy :: Proxy s)     step a c = a * 16 + fromIntegral (Char.digitToInt c) {-# INLINEABLE hexadecimal #-}  -- | Parse a floating point value as a 'Scientific' number. 'Scientific' is--- great for parsing of arbitrary precision numbers coming from an untrusted--- source. See documentation in "Data.Scientific" for more information.+-- great for parsing arbitrary-precision numbers coming from an untrusted+-- source. See the documentation in "Data.Scientific" for more information. -- -- The parser can be used to parse integers or floating point values. Use -- functions like 'Data.Scientific.floatingOrInteger' from "Data.Scientific" -- to test and extract integer or real values. ----- This function does not parse sign, if you need to parse signed numbers,+-- This function does not parse a sign; if you need to parse signed numbers, -- see 'signed'. -- -- @since 5.0.0@@ -482,7 +482,7 @@ -- | Parse a floating point number according to the syntax for floating -- point literals described in the Haskell report. ----- This function does not parse sign, if you need to parse signed numbers,+-- This function does not parse a sign; if you need to parse signed numbers, -- see 'signed'. -- -- __Note__: before version /6.0.0/ the function returned 'Double', i.e. it@@ -510,7 +510,7 @@   m SP dotDecimal_ pxy c' = do   void (C.char '.')-  let mkNum = foldl' step (SP c' 0) . chunkToTokens pxy+  let mkNum = Data.List.foldl' step (SP c' 0) . chunkToTokens pxy       step (SP a e') c =         SP           (a * 10 + fromIntegral (Char.digitToInt c))@@ -527,13 +527,13 @@   (+ e') <$> signed (return ()) decimal_ {-# INLINE exponent_ #-} --- | @'signed' space p@ parses an optional sign character (“+” or “-”), then--- if there is a sign it consumes optional white space (using the @space@--- parser), then it runs the parser @p@ which should return a number. Sign--- of the number is changed according to the previously parsed sign+-- | @'signed' space p@ parses an optional sign character (“+” or “-”), then,+-- if there is a sign, it consumes optional white space (using the @space@+-- parser), then it runs the parser @p@, which should return a number. The+-- sign of the number is changed according to the previously parsed sign -- character. ----- For example, to parse signed integer you can write:+-- For example, to parse a signed integer you can write: -- -- > lexeme        = L.lexeme spaceConsumer -- > integer       = lexeme L.decimal

@@ -16,8 +16,8 @@ -- Stability   :  experimental -- Portability :  portable ----- Definition of 'MonadParsec'—type class describing monads that implement--- the full set of primitive parsers.+-- Definition of 'MonadParsec'—the type class describing monads that+-- implement the full set of primitive parsers. -- -- @since 6.5.0 module Text.Megaparsec.Class@@ -61,7 +61,7 @@   label :: String -> m a -> m a    -- | @'hidden' p@ behaves just like parser @p@, but it doesn't show any-  -- “expected” tokens in error message when @p@ fails.+  -- “expected” tokens in the error message when @p@ fails.   --   -- Please use 'hidden' instead of the old @'label' ""@ idiom.   hidden :: m a -> m a@@ -71,7 +71,7 @@   -- backtracks the parser state when @p@ fails (either consuming input or   -- not).   ---  -- This combinator is used whenever arbitrary look ahead is needed. Since+  -- This combinator is used whenever arbitrary lookahead is needed. Since   -- it pretends that it hasn't consumed any input when @p@ fails, the   -- ('A.<|>') combinator will try its second alternative even if the first   -- parser failed while consuming input.@@ -107,11 +107,11 @@   -- alternatives are complex, composite parsers.   try :: m a -> m a -  -- | If @p@ in @'lookAhead' p@ succeeds (either consuming input or not)-  -- the whole parser behaves like @p@ succeeded without consuming anything-  -- (parser state is not updated as well). If @p@ fails, 'lookAhead' has no-  -- effect, i.e. it will fail consuming input if @p@ fails consuming input.-  -- Combine with 'try' if this is undesirable.+  -- | If @p@ in @'lookAhead' p@ succeeds (either consuming input or not),+  -- the whole parser behaves as if @p@ succeeded without consuming anything+  -- (the parser state is not updated either). If @p@ fails, 'lookAhead' has+  -- no effect, i.e. it will fail consuming input if @p@ fails consuming+  -- input. Combine with 'try' if this is undesirable.   lookAhead :: m a -> m a    -- | @'notFollowedBy' p@ only succeeds when the parser @p@ fails. This@@ -126,8 +126,8 @@   -- to the point where the next object starts.   --   -- Note that if @r@ fails, the original error message is reported as if-  -- without 'withRecovery'. In no way recovering parser @r@ can influence-  -- error messages.+  -- 'withRecovery' had not been used. In no way can the recovering parser @r@+  -- influence error messages.   --   -- @since 4.4.0   withRecovery ::@@ -139,10 +139,10 @@     m a    -- | @'observing' p@ allows us to “observe” failure of the @p@ parser,-  -- should it happen, without actually ending parsing but instead getting-  -- the 'ParseError' in 'Left'. On success parsed value is returned in+  -- should it happen, without actually ending parsing, but instead getting+  -- the 'ParseError' in 'Left'. On success, the parsed value is returned in   -- 'Right' as usual. Note that this primitive just allows you to observe-  -- parse errors as they happen, it does not backtrack or change how the+  -- parse errors as they happen; it does not backtrack or change how the   -- @p@ parser works in any way.   --   -- @since 5.1.0@@ -156,7 +156,7 @@    -- | The parser @'token' test expected@ accepts tokens for which the   -- matching function @test@ returns 'Just' results. If 'Nothing' is-  -- returned the @expected@ set is used to report the items that were+  -- returned, the @expected@ set is used to report the items that were   -- expected.   --   -- For example, the 'Text.Megaparsec.satisfy' parser is implemented as:@@ -165,7 +165,7 @@   -- >   where   -- >     testToken x = if f x then Just x else Nothing   ---  -- __Note__: type signature of this primitive was changed in the version+  -- __Note__: the type signature of this primitive was changed in version   -- /7.0.0/.   token ::     -- | Matching function for the token to parse@@ -179,15 +179,15 @@   -- given and parsed chunks after a candidate chunk of correct length is   -- fetched from the stream.   ---  -- This can be used for example to write 'Text.Megaparsec.chunk':+  -- This can be used, for example, to write 'Text.Megaparsec.chunk':   --   -- > chunk = tokens (==)   ---  -- Note that beginning from Megaparsec 4.4.0, this is an auto-backtracking+  -- Note that beginning with Megaparsec 4.4.0, this is an auto-backtracking   -- primitive, which means that if it fails, it never consumes any input.   -- This is done to make its consumption model match how error messages for-  -- this primitive are reported (which becomes an important thing as user-  -- gets more control with primitives like 'withRecovery'):+  -- this primitive are reported (which becomes important as the user gets+  -- more control with primitives like 'withRecovery'):   --   -- >>> parseTest (string "abc") "abd"   -- 1:1:@@ -217,7 +217,7 @@   --   -- @since 6.0.0   takeWhileP ::-    -- | Name for a single token in the row+    -- | Name for a single token in the resulting chunk     Maybe String ->     -- | Predicate to use to test tokens     (Token s -> Bool) ->@@ -237,7 +237,7 @@   --   -- @since 6.0.0   takeWhile1P ::-    -- | Name for a single token in the row+    -- | Name for a single token in the resulting chunk     Maybe String ->     -- | Predicate to use to test tokens     (Token s -> Bool) ->@@ -245,22 +245,23 @@     m (Tokens s)    -- | Extract the specified number of tokens from the input stream and-  -- return them packed as a chunk of stream. If there is not enough tokens-  -- in the stream, a parse error will be signaled. It's guaranteed that if-  -- the parser succeeds, the requested number of tokens will be returned.+  -- return them packed as a chunk of the stream. If there are not enough+  -- tokens in the stream, a parse error will be signaled. It's guaranteed+  -- that if the parser succeeds, the requested number of tokens will be+  -- returned.   --   -- The parser is roughly equivalent to:   --   -- > takeP (Just "foo") n = count n (anySingle <?> "foo")   -- > takeP Nothing      n = count n anySingle   ---  -- Note that if the combinator fails due to insufficient number of tokens-  -- in the input stream, it backtracks automatically. No 'try' is necessary-  -- with 'takeP'.+  -- Note that if the combinator fails due to an insufficient number of+  -- tokens in the input stream, it backtracks automatically. No 'try' is+  -- necessary with 'takeP'.   --   -- @since 6.0.0   takeP ::-    -- | Name for a single token in the row+    -- | Name for a single token in the resulting chunk     Maybe String ->     -- | How many tokens to extract     Int ->

@@ -10,7 +10,7 @@ -- Stability   :  experimental -- Portability :  portable ----- Common token combinators. This module is not public, the functions from+-- Common token combinators. This module is not public; the functions from -- it are re-exported in "Text.Megaparsec.Byte" and "Text.Megaparsec.Char". -- -- @since 7.0.0@@ -29,8 +29,8 @@ string = chunk {-# INLINE string #-} --- | The same as 'string', but case-insensitive. On success returns string--- cased as the parsed input.+-- | The same as 'string', but case-insensitive. On success returns the+-- string cased as the parsed input. -- -- >>> parseTest (string' "foobar") "foObAr" -- "foObAr"

@@ -46,18 +46,18 @@ -- -- @since 9.3.0 class (MonadParsec e s m) => MonadParsecDbg e s m where-  -- | @'dbg' label p@ parser works exactly like @p@, but when it's evaluated-  -- it prints information useful for debugging. The @label@ is only used to-  -- refer to this parser in the debugging output. This combinator uses the-  -- 'trace' function from "Debug.Trace" under the hood.+  -- | The @'dbg' label p@ parser works exactly like @p@, but when it's+  -- evaluated it prints information useful for debugging. The @label@ is only+  -- used to refer to this parser in the debugging output. This combinator+  -- uses the 'trace' function from "Debug.Trace" under the hood.   ---  -- Typical usage is to wrap every sub-parser in misbehaving parser with-  -- 'dbg' assigning meaningful labels. Then give it a shot and go through the-  -- print-out. As of current version, this combinator prints all available-  -- information except for /hints/, which are probably only interesting to-  -- the maintainer of Megaparsec itself and may be quite verbose to output in-  -- general. Let me know if you would like to be able to see hints in the-  -- debugging output.+  -- Typical usage is to wrap every sub-parser of a misbehaving parser with+  -- 'dbg', assigning meaningful labels. Then give it a shot and go through+  -- the print-out. As of the current version, this combinator prints all+  -- available information except for /hints/, which are probably only+  -- interesting to the maintainer of Megaparsec itself and may be quite+  -- verbose to output in general. Let me know if you would like to be able to+  -- see hints in the debugging output.   --   -- The output itself is pretty self-explanatory, although the following   -- abbreviations should be clarified (they are derived from the low-level@@ -68,9 +68,9 @@   --     * @EOK@—“empty OK”. The parser succeeded without consuming input.   --     * @EERR@—“empty error”. The parser failed without consuming input.   ---  -- __Note__: up until the version /9.3.0/ this was a non-polymorphic-  -- function that worked only in 'ParsecT'. It was first introduced in the-  -- version /7.0.0/.+  -- __Note__: up until version /9.3.0/ this was a non-polymorphic function+  -- that worked only in 'ParsecT'. It was first introduced in version+  -- /7.0.0/.   dbg ::     (Show a) =>     -- | Debugging label@@ -144,8 +144,8 @@   where   dbg str wma = S.WriterT $ dbgWithComment "LOG" str $ S.runWriterT wma --- | @RWST@ works like @StateT@ inside a @WriterT@: subparser's log and its--- final state is printed:+-- | @RWST@ works like @StateT@ inside a @WriterT@: the subparser's log and+-- its final state are printed: -- -- >>> p = tell [0] >> modify succ >> dbg "a" (single 'a' >> tell [1] >> modify succ) -- >>> parseTest (runRWST p () 0) "a"@@ -164,8 +164,8 @@     ((a, st), w) <- first unComment . unComment <$> dbg str smth     pure (a, st, w) --- | @RWST@ works like @StateT@ inside a @WriterT@: subparser's log and its--- final state is printed:+-- | @RWST@ works like @StateT@ inside a @WriterT@: the subparser's log and+-- its final state are printed: -- -- >>> p = tell [0] >> modify succ >> dbg "a" (single 'a' >> tell [1] >> modify succ) -- >>> parseTest (runRWST p () 0) "a"@@ -189,7 +189,7 @@  -- | @'dbgWithComment' label_a label_c m@ traces the first component of the -- result produced by @m@ with @label_a@ and the second component with--- @label_b@.+-- @label_c@. dbgWithComment ::   (MonadParsecDbg e s m, Show a, Show c) =>   -- | Debugging label (for @a@)@@ -294,12 +294,12 @@       let (h, r) = splitAt 40 (showTokens pxy ne)        in if null r then h else h ++ " <…>" --- | Calculate number of consumed tokens given 'State' of parser before and--- after parsing.+-- | Calculate the number of consumed tokens given the 'State' of the parser+-- before and after parsing. streamDelta ::-  -- | State of parser before consumption+  -- | State of the parser before consumption   State s e ->-  -- | State of parser after consumption+  -- | State of the parser after consumption   State s e ->   -- | Number of consumed tokens   Int

@@ -41,12 +41,15 @@     -- * Pretty-printing     ShowErrorComponent (..),     errorBundlePretty,+    errorBundlePrettyForGhcPreProcessors,+    errorBundlePrettyWith,     parseErrorPretty,     parseErrorTextPretty,     showErrorItem,   ) where +import Control.Arrow ((>>>)) import Control.DeepSeq import Control.Exception import Control.Monad.State.Strict@@ -64,11 +67,12 @@ import Text.Megaparsec.Pos import Text.Megaparsec.State import Text.Megaparsec.Stream+import qualified Text.Megaparsec.Unicode as Unicode  ---------------------------------------------------------------------------- -- Parse error type --- | A data type that is used to represent “unexpected\/expected” items in+-- | A data type that is used to represent “unexpected\/expected” items in a -- 'ParseError'. It is parametrized over the token type @t@. -- -- @since 5.0.0@@ -79,17 +83,17 @@     Label (NonEmpty Char)   | -- | End of input     EndOfInput-  deriving (Show, Read, Eq, Ord, Data, Typeable, Generic, Functor)+  deriving (Show, Read, Eq, Ord, Data, Generic, Functor)  instance (NFData t) => NFData (ErrorItem t) --- | Additional error data, extendable by user. When no custom data is+-- | Additional error data, extendable by the user. When no custom data is -- necessary, the type is typically indexed by 'Void' to “cancel” the -- 'ErrorCustom' constructor. -- -- @since 6.0.0 data ErrorFancy e-  = -- | 'fail' has been used in parser monad+  = -- | 'fail' has been used in the parser monad     ErrorFail String   | -- | Incorrect indentation error: desired ordering between reference     -- level and actual level, reference indentation level, actual@@ -97,7 +101,7 @@     ErrorIndentation Ordering Pos Pos   | -- | Custom error data     ErrorCustom e-  deriving (Show, Read, Eq, Ord, Data, Typeable, Generic, Functor)+  deriving (Show, Read, Eq, Ord, Data, Generic, Functor)  instance (NFData a) => NFData (ErrorFancy a) where   rnf (ErrorFail str) = rnf str@@ -119,13 +123,13 @@     -- constructor includes the offset of error, unexpected token (if any),     -- and expected tokens.     ---    -- Type of the first argument was changed in the version /7.0.0/.+    -- The type of the first argument was changed in version /7.0.0/.     TrivialError Int (Maybe (ErrorItem (Token s))) (Set (ErrorItem (Token s)))   | -- | Fancy, custom errors.     ---    -- Type of the first argument was changed in the version /7.0.0/.+    -- The type of the first argument was changed in version /7.0.0/.     FancyError Int (Set (ErrorFancy e))-  deriving (Typeable, Generic)+  deriving (Generic)  deriving instance   ( Show (Token s),@@ -164,8 +168,7 @@   {-# INLINE mappend #-}  instance-  ( Show s,-    Show (Token s),+  ( Show (Token s),     Show e,     ShowErrorComponent e,     VisualStream s,@@ -202,11 +205,11 @@ setErrorOffset o (TrivialError _ u p) = TrivialError o u p setErrorOffset o (FancyError _ x) = FancyError o x --- | Merge two error data structures into one joining their collections of--- message items and preferring the longest match. In other words, earlier--- error message is discarded. This may seem counter-intuitive, but+-- | Merge two error data structures into one, joining their collections of+-- message items and preferring the longest match. In other words, the+-- earlier error message is discarded. This may seem counter-intuitive, but -- 'mergeError' is only used to merge error messages of alternative branches--- of parsing and in this case longest match should be preferred.+-- of parsing, and in this case the longest match should be preferred. mergeError ::   (Stream s, Ord e) =>   ParseError s e ->@@ -239,7 +242,7 @@     n (Just x) (Just y) = Just (max x y) {-# INLINE mergeError #-} --- | A non-empty collection of 'ParseError's equipped with 'PosState' that+-- | A non-empty collection of 'ParseError's equipped with a 'PosState' that -- allows us to pretty-print the errors efficiently and correctly. -- -- @since 7.0.0@@ -266,13 +269,6 @@   Eq (ParseErrorBundle s e)  deriving instance-  ( Typeable s,-    Typeable (Token s),-    Typeable e-  ) =>-  Typeable (ParseErrorBundle s e)--deriving instance   ( Data s,     Data (Token s),     Ord (Token s),@@ -337,8 +333,8 @@   -- | Pretty-print a component of 'ParseError'.   showErrorComponent :: a -> String -  -- | Length of the error component in characters, used for highlighting of-  -- parse errors in input string.+  -- | Length of the error component in characters, used for highlighting+  -- parse errors in the input string.   --   -- @since 7.0.0   errorComponentLen :: a -> Int@@ -348,24 +344,24 @@   showErrorComponent = absurd  -- | Pretty-print a 'ParseErrorBundle'. All 'ParseError's in the bundle will--- be pretty-printed in order together with the corresponding offending--- lines by doing a single pass over the input stream. The rendered 'String'--- always ends with a newline.+-- be pretty-printed in order, by applying a provided format function, with+-- a single pass over the input stream. ----- @since 7.0.0-errorBundlePretty ::+-- @since 9.7.0+errorBundlePrettyWith ::   forall s e.   ( VisualStream s,-    TraversableStream s,-    ShowErrorComponent e+    TraversableStream s   ) =>+  -- | Format function for a single 'ParseError'+  (Maybe String -> SourcePos -> ParseError s e -> String) ->   -- | Parse error bundle to display   ParseErrorBundle s e ->   -- | Textual rendition of the bundle   String-errorBundlePretty ParseErrorBundle {..} =+errorBundlePrettyWith format ParseErrorBundle {..} =   let (r, _) = foldl f (id, bundlePosState) bundleErrors-   in drop 1 (r "")+   in r ""   where     f ::       (ShowS, PosState s) ->@@ -375,6 +371,33 @@       where         (msline, pst') = reachOffset (errorOffset e) pst         epos = pstateSourcePos pst'+        outChunk = format msline epos e++-- | Pretty-print a 'ParseErrorBundle'. All 'ParseError's in the bundle will+-- be pretty-printed in order together with the corresponding offending+-- lines by doing a single pass over the input stream. The rendered 'String'+-- always ends with a newline.+--+-- @since 7.0.0+errorBundlePretty ::+  forall s e.+  ( VisualStream s,+    TraversableStream s,+    ShowErrorComponent e+  ) =>+  -- | Parse error bundle to display+  ParseErrorBundle s e ->+  -- | Textual rendition of the bundle+  String+errorBundlePretty = drop 1 . errorBundlePrettyWith format+  where+    format ::+      Maybe String ->+      SourcePos ->+      ParseError s e ->+      String+    format msline epos e = outChunk+      where         outChunk =           "\n"             <> sourcePosPretty epos@@ -385,19 +408,17 @@           case msline of             Nothing -> ""             Just sline ->-              let rpadding =-                    if pointerLen > 0-                      then replicate rpshift ' '-                      else ""+              let rpadding = replicate rpshift ' '                   pointerLen =-                    if rpshift + elen > slineLen-                      then slineLen - rpshift + 1-                      else elen+                    max 1 $+                      if rpshift + elen > slineLen+                        then slineLen - rpshift + 1+                        else elen                   pointer = replicate pointerLen '^'                   lineNumber = (show . unPos . sourceLine) epos                   padding = replicate (length lineNumber + 1) ' '                   rpshift = unPos (sourceColumn epos) - 1-                  slineLen = length sline+                  slineLen = Unicode.stringLength sline                in padding                     <> "|\n"                     <> lineNumber@@ -416,6 +437,41 @@             TrivialError _ (Just x) _ -> errorItemLength pxy x             FancyError _ xs ->               E.foldl' (\a b -> max a (errorFancyLength b)) 1 xs++-- | Pretty-print a 'ParseErrorBundle'. All 'ParseError's in the bundle will+-- be pretty-printed in order by doing a single pass over the input stream.+--+-- The rendered format is suitable for custom GHC pre-processors (as can be+-- specified with -F -pgmF).+--+-- @since 9.7.0+errorBundlePrettyForGhcPreProcessors ::+  forall s e.+  ( VisualStream s,+    TraversableStream s,+    ShowErrorComponent e+  ) =>+  -- | Parse error bundle to display+  ParseErrorBundle s e ->+  -- | Textual rendition of the bundle+  String+errorBundlePrettyForGhcPreProcessors = errorBundlePrettyWith format+  where+    format ::+      Maybe String ->+      SourcePos ->+      ParseError s e ->+      String+    format _msline epos e =+      sourcePosPretty epos+        <> ":"+        <> indent (parseErrorTextPretty e)++    indent :: String -> String+    indent =+      lines >>> \case+        [err] -> err+        err -> intercalate "\n" $ map (" " <>) err  -- | Pretty-print a 'ParseError'. The rendered 'String' always ends with a -- newline.

@@ -47,7 +47,6 @@ import Data.Proxy import Data.Set (Set) import qualified Data.Set as E-import Data.Typeable (Typeable) import GHC.Generics import Text.Megaparsec.Error import Text.Megaparsec.Stream@@ -57,7 +56,7 @@  -- | Auxiliary type for construction of trivial parse errors. data ET s = ET (Maybe (ErrorItem (Token s))) (Set (ErrorItem (Token s)))-  deriving (Typeable, Generic)+  deriving (Generic)  deriving instance (Eq (Token s)) => Eq (ET s) @@ -84,7 +83,7 @@  -- | Auxiliary type for construction of fancy parse errors. newtype EF e = EF (Set (ErrorFancy e))-  deriving (Eq, Ord, Data, Typeable, Generic)+  deriving (Eq, Ord, Data, Generic)  instance (Ord e) => Semigroup (EF e) where   EF xs0 <> EF xs1 = EF (E.union xs0 xs1)@@ -125,8 +124,8 @@ utok :: Token s -> ET s utok = unexp . Tokens . nes --- | Construct an “unexpected tokens” error component. Empty chunk produces--- 'EndOfInput'.+-- | Construct an “unexpected tokens” error component. An empty chunk+-- produces 'EndOfInput'. utoks :: forall s. (Stream s) => Tokens s -> ET s utoks = unexp . canonicalizeTokens (Proxy :: Proxy s) @@ -145,7 +144,7 @@ etok :: Token s -> ET s etok = expe . Tokens . nes --- | Construct an “expected tokens” error component. Empty chunk produces+-- | Construct an “expected tokens” error component. An empty chunk produces -- 'EndOfInput'. etoks :: forall s. (Stream s) => Tokens s -> ET s etoks = expe . canonicalizeTokens (Proxy :: Proxy s)

@@ -46,6 +46,7 @@  import Control.Applicative import Control.Monad+import qualified Control.Monad.Combinators import Control.Monad.Cont.Class import Control.Monad.Error.Class import qualified Control.Monad.Fail as Fail@@ -70,10 +71,10 @@ ---------------------------------------------------------------------------- -- Data types --- | 'Hints' represent a collection of 'ErrorItem's to be included into--- 'ParseError' (when it's a 'TrivialError') as “expected” message items--- when a parser fails without consuming input right after successful parser--- that produced the hints.+-- | 'Hints' represent a collection of 'ErrorItem's to be included in a+-- 'ParseError' (when it's a 'TrivialError') as “expected” message items when+-- a parser fails without consuming input right after a successful parser that+-- produced the hints. -- -- For example, without hints you could get: --@@ -98,8 +99,8 @@  -- | All information available after parsing. This includes consumption of -- input, success (with the returned value) or failure (with the parse--- error), and parser state at the end of parsing. 'Reply' can also be used--- to resume parsing.+-- error), and the parser state at the end of parsing. 'Reply' can also be+-- used to resume parsing. -- -- See also: 'Consumption', 'Result'. data Reply e s a = Reply (State s e) Consumption (Result s e a)@@ -109,7 +110,7 @@ -- -- See also: 'Result', 'Reply'. data Consumption-  = -- | Some part of input stream was consumed+  = -- | Some part of the input stream was consumed     Consumed   | -- | No input was consumed     NotConsumed@@ -125,8 +126,8 @@     Error (ParseError s e)   deriving (Functor) --- | @'ParsecT' e s m a@ is a parser with custom data component of error--- @e@, stream type @s@, underlying monad @m@ and return type @a@.+-- | @'ParsecT' e s m a@ is a parser with custom error data component @e@,+-- stream type @s@, underlying monad @m@, and return type @a@. newtype ParsecT e s m a = ParsecT   { unParser ::       forall b.@@ -174,7 +175,9 @@   pure = pPure   (<*>) = pAp   p1 *> p2 = p1 `pBind` const p2+  {-# INLINE (*>) #-}   p1 <* p2 = do x1 <- p1; void p2; return x1+  {-# INLINE (<*) #-}  pPure :: (Stream s) => a -> ParsecT e s m a pPure x = ParsecT $ \s _ _ eok _ -> eok x s mempty@@ -209,6 +212,8 @@ instance (Ord e, Stream s) => Alternative (ParsecT e s m) where   empty = mzero   (<|>) = mplus+  many = Control.Monad.Combinators.many+  some = Control.Monad.Combinators.some  -- | 'return' returns a parser that __succeeds__ without consuming input. instance (Stream s) => Monad (ParsecT e s m) where@@ -329,9 +334,9 @@ -- __Note__: strictly speaking, this instance is unlawful. The right -- identity law does not hold, e.g. in general this is not true: ----- > v >> mzero = mero+-- > v >> mzero = mzero ----- However the following holds:+-- However, the following holds: -- -- > try v >> mzero = mzero instance (Ord e, Stream s) => MonadPlus (ParsecT e s m) where@@ -352,9 +357,20 @@   let meerr err ms =         let ncerr err' s' = cerr (err' <> err) (longestMatch ms s')             neok x s' hs = eok x s' (toHints (stateOffset s') err <> hs)-            neerr err' s' = eerr (err' <> err) (longestMatch ms s')+            neerr err' s' =+              let combinedErr = combineErrors (stateOffset s) err err'+               in eerr combinedErr (longestMatch ms s')          in unParser n s cok ncerr neok neerr    in unParser m s cok cerr eok meerr+  where+    combineErrors altOffset e1 e2 = case (e1, e2) of+      (TrivialError o1 u1 p1, TrivialError o2 _ _)+        | o1 == altOffset && o2 > altOffset ->+            TrivialError altOffset u1 p1+      (TrivialError o1 _ _, TrivialError o2 u2 p2)+        | o2 == altOffset && o1 > altOffset ->+            TrivialError altOffset u2 p2+      _ -> e2 <> e1 {-# INLINE pPlus #-}  -- | From two states, return the one with the greater number of processed@@ -435,10 +451,10 @@ pNotFollowedBy :: (Stream s) => ParsecT e s m a -> ParsecT e s m () pNotFollowedBy p = ParsecT $ \s@(State input o _ _) _ _ eok eerr ->   let what = maybe EndOfInput (Tokens . nes . fst) (take1_ input)-      unexpect u = TrivialError o (pure u) E.empty-      cok' _ _ _ = eerr (unexpect what) s+      unexpected u = TrivialError o (pure u) E.empty+      cok' _ _ _ = eerr (unexpected what) s       cerr' _ _ = eok () s mempty-      eok' _ _ _ = eerr (unexpect what) s+      eok' _ _ _ = eerr (unexpected what) s       eerr' _ _ = eok () s mempty    in unParser p s cok' cerr' eok' eerr' {-# INLINE pNotFollowedBy #-}@@ -516,14 +532,14 @@   ParsecT e s m (Tokens s) pTokens f tts = ParsecT $ \s@(State input o pst de) cok _ eok eerr ->   let pxy = Proxy :: Proxy s-      unexpect pos' u =+      unexpected pos' u =         let us = pure u             ps = (E.singleton . Tokens . NE.fromList . chunkToTokens pxy) tts          in TrivialError pos' us ps       len = chunkLength pxy tts    in case takeN_ len input of         Nothing ->-          eerr (unexpect o EndOfInput) s+          eerr (unexpected o EndOfInput) s         Just (tts', input') ->           if f tts tts'             then@@ -533,7 +549,7 @@                     else cok tts' st mempty             else               let ps = (Tokens . NE.fromList . chunkToTokens pxy) tts'-               in eerr (unexpect o ps) (State input o pst de)+               in eerr (unexpected o ps) (State input o pst de) {-# INLINE pTokens #-}  pTakeWhileP ::@@ -589,7 +605,7 @@   Maybe String ->   Int ->   ParsecT e s m (Tokens s)-pTakeP ml n' = ParsecT $ \s@(State input o pst de) cok _ _ eerr ->+pTakeP ml n' = ParsecT $ \s@(State input o pst de) cok _ eok eerr ->   let n = max 0 n'       pxy = Proxy :: Proxy s       el = Label <$> (ml >>= NE.nonEmpty)@@ -599,12 +615,19 @@           eerr (TrivialError o (pure EndOfInput) ps) s         Just (ts, input') ->           let len = chunkLength pxy ts+              st = State input' (o + len) pst de            in if len /= n                 then                   eerr                     (TrivialError (o + len) (pure EndOfInput) ps)                     (State input o pst de)-                else cok ts (State input' (o + len) pst de) mempty+                else+                  -- NOTE When nothing has been taken we must report that no+                  -- input has been consumed, otherwise e.g. ('<|>') would+                  -- not try its second branch after this parser.+                  if chunkEmpty pxy ts+                    then eok ts st mempty+                    else cok ts st mempty {-# INLINE pTakeP #-}  pGetParserState :: (Stream s) => ParsecT e s m (State s e)@@ -625,7 +648,7 @@ -- | Convert a 'ParseError' record into 'Hints'. toHints ::   (Stream s) =>-  -- | Current offset in input stream+  -- | Current offset in the input stream   Int ->   -- | Parse error to convert   ParseError s e ->@@ -642,10 +665,11 @@   FancyError _ _ -> mempty {-# INLINE toHints #-} --- | @'withHints' hs c@ makes “error” continuation @c@ use given hints @hs@.+-- | @'withHints' hs c@ makes the “error” continuation @c@ use the given+-- hints @hs@. ----- __Note__ that if resulting continuation gets 'ParseError' that has custom--- data in it, hints are ignored.+-- __Note__ that if the resulting continuation gets a 'ParseError' that has+-- custom data in it, the hints are ignored. withHints ::   (Stream s) =>   -- | Hints to use@@ -663,8 +687,8 @@     _ -> c e {-# INLINE withHints #-} --- | @'accHints' hs c@ results in “OK” continuation that will add given--- hints @hs@ to third argument of original continuation @c@.+-- | @'accHints' hs c@ results in an “OK” continuation that will add the given+-- hints @hs@ to the third argument of the original continuation @c@. accHints ::   (Stream s) =>   -- | 'Hints' to add

@@ -2,7 +2,7 @@ {-# LANGUAGE Safe #-}  -- |--- Module      :  Text.Megaparsec.Common+-- Module      :  Text.Megaparsec.Lexer -- Copyright   :  © 2018–present Megaparsec contributors -- License     :  FreeBSD --@@ -10,7 +10,7 @@ -- Stability   :  experimental -- Portability :  portable ----- Common token combinators. This module is not public, the functions from+-- Common token combinators. This module is not public; the functions from -- it are re-exported in "Text.Megaparsec.Byte" and "Text.Megaparsec.Char". -- -- @since 7.0.0@@ -38,9 +38,9 @@ -- -- @sc@ is used to parse blocks of space characters. You can use -- 'Text.Megaparsec.Char.space1' from "Text.Megaparsec.Char" for this--- purpose as well as your own parser (if you don't want to automatically+-- purpose, as well as your own parser (if you don't want to automatically -- consume newlines, for example). Make sure that the parser does not--- succeed on the empty input though. In an earlier version of the library+-- succeed on empty input though. In an earlier version of the library, -- 'Text.Megaparsec.Char.spaceChar' was recommended, but now parsers based -- on 'takeWhile1P' are preferred because of their speed. --@@ -51,8 +51,8 @@ -- @skipBlockComment@ or @skipBlockCommentNested@ if you don't need anything -- special. ----- If you don't want to allow a kind of comment, simply pass 'empty' which--- will fail instantly when parsing of that sort of comment is attempted and+-- If you don't want to allow a kind of comment, simply pass 'empty', which+-- will fail instantly when parsing of that sort of comment is attempted, and -- 'space' will just move on or finish depending on whether there is more -- white space for it to consume. space ::@@ -79,9 +79,9 @@ -- > integer = lexeme L.decimal lexeme ::   (MonadParsec e s m) =>-  -- | How to consume white space after lexeme+  -- | How to consume white space after the lexeme   m () ->-  -- | How to parse actual lexeme+  -- | How to parse the actual lexeme   m a ->   m a lexeme spc p = p <* spc@@ -103,7 +103,7 @@ -- > dot       = symbol "." symbol ::   (MonadParsec e s m) =>-  -- | How to consume white space after lexeme+  -- | How to consume white space after the lexeme   m () ->   -- | Symbol to parse   Tokens s ->@@ -115,7 +115,7 @@ -- working with case-insensitive languages. symbol' ::   (MonadParsec e s m, CI.FoldCase (Tokens s)) =>-  -- | How to consume white space after lexeme+  -- | How to consume white space after the lexeme   m () ->   -- | Symbol to parse (case-insensitive)   Tokens s ->

@@ -12,8 +12,8 @@ -- Stability   :  experimental -- Portability :  portable ----- Textual source position. The position includes name of file, line number,--- and column number.+-- Textual source position. The position includes the name of the file, the+-- line number, and the column number. -- -- You probably do not want to import this module directly because -- "Text.Megaparsec" re-exports it anyway.@@ -36,20 +36,19 @@ import Control.DeepSeq import Control.Exception import Data.Data (Data)-import Data.Typeable (Typeable) import GHC.Generics  ---------------------------------------------------------------------------- -- Abstract position  -- | 'Pos' is the type for positive integers. This is used to represent line--- number, column number, and similar things like indentation level.+-- number, column number, and similar things like indentation level. The -- 'Semigroup' instance can be used to safely and efficiently add 'Pos'es -- together. -- -- @since 5.0.0 newtype Pos = Pos Int-  deriving (Show, Eq, Ord, Data, Generic, Typeable, NFData)+  deriving (Show, Eq, Ord, Data, Generic, NFData)  -- | Construction of 'Pos' from 'Int'. The function throws -- 'InvalidPosException' when given a non-positive argument.@@ -75,9 +74,9 @@ pos1 :: Pos pos1 = mkPos 1 --- | Value of tab width used by default. Always prefer this constant when--- you want to refer to the default tab width because actual value /may/--- change in future.+-- | The value of the tab width used by default. Always prefer this constant+-- when you want to refer to the default tab width, because the actual value+-- /may/ change in the future. -- -- Currently: --@@ -105,7 +104,7 @@ newtype InvalidPosException   = -- | Contains the actual value that was passed to 'mkPos'     InvalidPosException Int-  deriving (Eq, Show, Data, Typeable, Generic)+  deriving (Eq, Show, Data, Generic)  instance Exception InvalidPosException @@ -126,12 +125,12 @@     -- | Column number     sourceColumn :: !Pos   }-  deriving (Show, Read, Eq, Ord, Data, Typeable, Generic)+  deriving (Show, Read, Eq, Ord, Data, Generic)  instance NFData SourcePos --- | Construct initial position (line 1, column 1) given name of source--- file.+-- | Construct the initial position (line 1, column 1) given the name of the+-- source file. initialPos :: FilePath -> SourcePos initialPos n = SourcePos n pos1 pos1 

@@ -29,15 +29,14 @@  import Control.DeepSeq (NFData) import Data.Data (Data)-import Data.Typeable (Typeable) import GHC.Generics import {-# SOURCE #-} Text.Megaparsec.Error (ParseError) import Text.Megaparsec.Pos --- | This is the Megaparsec's state parametrized over stream type @s@ and--- custom error component type @e@.+-- | This is Megaparsec's state, parametrized over the stream type @s@ and+-- the custom error component type @e@. data State s e = State-  { -- | The rest of input to process+  { -- | The rest of the input to process     stateInput :: s,     -- | Number of processed tokens so far     --@@ -53,7 +52,7 @@     -- @since 8.0.0     stateParseErrors :: [ParseError s e]   }-  deriving (Typeable, Generic)+  deriving (Generic)  deriving instance   ( Show (ParseError s e),@@ -76,7 +75,7 @@  instance (NFData s, NFData (ParseError s e)) => NFData (State s e) --- | Given the name of the source file and the input construct the initial+-- | Given the name of the source file and the input, construct the initial -- state for a parser. -- -- @since 9.6.0@@ -99,22 +98,22 @@ -- -- @since 7.0.0 data PosState s = PosState-  { -- | The rest of input to process+  { -- | The rest of the input to process     pstateInput :: s,-    -- | Offset corresponding to beginning of 'pstateInput'+    -- | Offset corresponding to the beginning of 'pstateInput'     pstateOffset :: !Int,-    -- | Source position corresponding to beginning of 'pstateInput'+    -- | Source position corresponding to the beginning of 'pstateInput'     pstateSourcePos :: !SourcePos,     -- | Tab width to use for column calculation     pstateTabWidth :: Pos,-    -- | Prefix to prepend to offending line+    -- | Prefix to prepend to the offending line     pstateLinePrefix :: String   }-  deriving (Show, Eq, Data, Typeable, Generic)+  deriving (Show, Eq, Data, Generic)  instance (NFData s) => NFData (PosState s) --- | Given the name of source file and the input construct the initial+-- | Given the name of the source file and the input, construct the initial -- positional state. -- -- @since 9.6.0

@@ -40,8 +40,9 @@ import qualified Data.ByteString.Lazy as BL import qualified Data.ByteString.Lazy.Char8 as BL8 import Data.Char (chr)-import Data.Foldable (foldl', toList)+import Data.Foldable (toList) import Data.Kind (Type)+import qualified Data.List import Data.List.NonEmpty (NonEmpty (..)) import qualified Data.List.NonEmpty as NE import Data.Maybe (fromMaybe)@@ -52,6 +53,7 @@ import Data.Word (Word8) import Text.Megaparsec.Pos import Text.Megaparsec.State+import qualified Text.Megaparsec.Unicode as Unicode  -- | Type class for inputs that can be consumed by the library. --@@ -61,7 +63,7 @@ -- retain the current behaviour and are concerned with maximum performance you -- should consider using the 'ShareInput' wrapper explicitly. ----- __Note__: before the version /9.0.0/ the class included the methods from+-- __Note__: before version /9.0.0/ the class included the methods from -- 'VisualStream' and 'TraversableStream'. class (Ord (Token s), Ord (Tokens s)) => Stream s where   -- | Type of token in the stream.@@ -70,29 +72,29 @@   -- | Type of “chunk” of the stream.   type Tokens s :: Type -  -- | Lift a single token to chunk of the stream. The default+  -- | Lift a single token to a chunk of the stream. The default   -- implementation is:   --   -- > tokenToChunk pxy = tokensToChunk pxy . pure   ---  -- However for some types of stream there may be a more efficient way to+  -- However, for some types of stream there may be a more efficient way to   -- lift.   tokenToChunk :: Proxy s -> Token s -> Tokens s   tokenToChunk pxy = tokensToChunk pxy . pure -  -- | The first method that establishes isomorphism between list of tokens-  -- and chunk of the stream. Valid implementation should satisfy:+  -- | The first method that establishes the isomorphism between a list of+  -- tokens and a chunk of the stream. A valid implementation should satisfy:   --   -- > chunkToTokens pxy (tokensToChunk pxy ts) == ts   tokensToChunk :: Proxy s -> [Token s] -> Tokens s -  -- | The second method that establishes isomorphism between list of tokens-  -- and chunk of the stream. Valid implementation should satisfy:+  -- | The second method that establishes the isomorphism between a list of+  -- tokens and a chunk of the stream. A valid implementation should satisfy:   --   -- > tokensToChunk pxy (chunkToTokens pxy chunk) == chunk   chunkToTokens :: Proxy s -> Tokens s -> [Token s] -  -- | Return length of a chunk of the stream.+  -- | Return the length of a chunk of the stream.   chunkLength :: Proxy s -> Tokens s -> Int    -- | Check if a chunk of the stream is empty. The default implementation@@ -100,16 +102,16 @@   --   -- > chunkEmpty pxy ts = chunkLength pxy ts <= 0   ---  -- However for many streams there may be a more efficient implementation.+  -- However, for many streams there may be a more efficient implementation.   chunkEmpty :: Proxy s -> Tokens s -> Bool   chunkEmpty pxy ts = chunkLength pxy ts <= 0 -  -- | Extract a single token form the stream. Return 'Nothing' if the+  -- | Extract a single token from the stream. Return 'Nothing' if the   -- stream is empty.   take1_ :: s -> Maybe (Token s, s)    -- | @'takeN_' n s@ should try to extract a chunk of length @n@, or if the-  -- stream is too short, the rest of the stream. Valid implementation+  -- stream is too short, the rest of the stream. A valid implementation   -- should follow the rules:   --   --     * If the requested length @n@ is 0 (or less), 'Nothing' should@@ -118,16 +120,16 @@   --       stream (second argument).   --     * If the requested length is greater than 0 and the stream is   --       empty, 'Nothing' should be returned indicating end of input.-  --     * In other cases, take chunk of length @n@ (or shorter if the+  --     * In other cases, take a chunk of length @n@ (or shorter if the   --       stream is not long enough) from the input stream and return the   --       chunk along with the rest of the stream.   takeN_ :: Int -> s -> Maybe (Tokens s, s) -  -- | Extract chunk of the stream taking tokens while the supplied+  -- | Extract a chunk of the stream, taking tokens while the supplied   -- predicate returns 'True'. Return the chunk and the rest of the stream.   ---  -- For many types of streams, the method allows for significant-  -- performance improvements, although it is not strictly necessary from+  -- For many types of streams, this method allows for significant+  -- performance improvements, although it is not strictly necessary from a   -- conceptual point of view.   takeWhile_ :: (Token s -> Bool) -> s -> (Tokens s, s) @@ -172,11 +174,11 @@ -- 'T.split'. -- -- Note that using slices is in general faster than copying; on the other--- hand it also has the potential for causing surprising memory leaks: if+-- hand, it also has the potential for causing surprising memory leaks: if -- any slice of the input survives in the output, holding on to the output -- will force the entire input 'T.Text'/'B.ByteString' to stay in memory! -- Even when using lazy 'TL.Text'/'BL.ByteString' we will hold on to whole--- chunks at a time leading to to significantly worse memory residency in+-- chunks at a time, leading to significantly worse memory residency in -- some cases. -- -- See 'NoShareInput' for a somewhat slower implementation that avoids this@@ -255,7 +257,7 @@ -- garbage collected. -- -- For maximum performance you might consider using 'ShareInput' instead,--- but beware of its pitfalls!+-- but beware its pitfalls! -- -- @since 9.3.0 newtype NoShareInput a = NoShareInput {unNoShareInput :: a}@@ -410,7 +412,7 @@ -- -- @since 9.0.0 class (Stream s) => VisualStream s where-  -- | Pretty-print non-empty stream of tokens. This function is also used+  -- | Pretty-print a non-empty stream of tokens. This function is also used   -- to print single tokens (represented as singleton lists).   --   -- @since 7.0.0@@ -426,6 +428,7 @@  instance VisualStream String where   showTokens Proxy = stringPretty+  tokensLength Proxy = Unicode.stringLength  instance VisualStream B.ByteString where   showTokens Proxy = stringPretty . fmap (chr . fromIntegral)@@ -435,9 +438,11 @@  instance VisualStream T.Text where   showTokens Proxy = stringPretty+  tokensLength Proxy = Unicode.stringLength  instance VisualStream TL.Text where   showTokens Proxy = stringPretty+  tokensLength Proxy = Unicode.stringLength  -- | Type class for inputs that can also be used for error reporting. --@@ -445,7 +450,7 @@ class (Stream s) => TraversableStream s where   {-# MINIMAL reachOffset | reachOffsetNoLine #-} -  -- | Given an offset @o@ and initial 'PosState', adjust the state in such+  -- | Given an offset @o@ and an initial 'PosState', adjust the state in such   -- a way that it starts at the offset.   --   -- Return two values (in order):@@ -458,20 +463,21 @@   --     * The updated 'PosState' which can be in turn used to locate   --       another offset @o'@ given that @o' >= o@.   ---  -- The 'String' representing the offending line in input stream should+  -- The 'String' representing the offending line in the input stream should   -- satisfy the following:   ---  --     * It should adequately represent location of token at the offset of-  --       interest, that is, character at 'sourceColumn' of the returned-  --       'SourcePos' should correspond to the token at the offset @o@.+  --     * It should adequately represent the location of the token at the+  --       offset of interest, that is, the character at 'sourceColumn' of the+  --       returned 'SourcePos' should correspond to the token at the offset+  --       @o@.   --     * It should not include the newline at the end.-  --     * It should not be empty, if the line happens to be empty, it+  --     * It should not be empty; if the line happens to be empty, it   --       should be replaced with the string @\"\<empty line\>\"@.-  --     * Tab characters should be replaced by appropriate number of+  --     * Tab characters should be replaced by an appropriate number of   --       spaces, which is determined by the 'pstateTabWidth' field of   --       'PosState'.   ---  -- __Note__: type signature of the function was changed in the version+  -- __Note__: the type signature of the function was changed in version   -- /9.0.0/.   --   -- @since 7.0.0@@ -486,14 +492,14 @@     (Nothing, reachOffsetNoLine o pst)    -- | A version of 'reachOffset' that may be faster because it doesn't need-  -- to fetch the line at which the given offset in located.+  -- to fetch the line at which the given offset is located.   --   -- The default implementation is this:   --   -- > reachOffsetNoLine o pst =   -- >   snd (reachOffset o pst)   ---  -- __Note__: type signature of the function was changed in the version+  -- __Note__: the type signature of the function was changed in version   -- /8.0.0/.   --   -- @since 7.0.0@@ -510,37 +516,37 @@ instance TraversableStream String where   -- NOTE Do not eta-reduce these (breaks inlining)   reachOffset o pst =-    reachOffset' splitAt foldl' id id ('\n', '\t') o pst+    reachOffset' splitAt Data.List.foldl' id id ('\n', '\t') charInc o pst   reachOffsetNoLine o pst =-    reachOffsetNoLine' splitAt foldl' ('\n', '\t') o pst+    reachOffsetNoLine' splitAt Data.List.foldl' ('\n', '\t') charInc o pst  instance TraversableStream B.ByteString where   -- NOTE Do not eta-reduce these (breaks inlining)   reachOffset o pst =-    reachOffset' B.splitAt B.foldl' B8.unpack (chr . fromIntegral) (10, 9) o pst+    reachOffset' B.splitAt B.foldl' B8.unpack (chr . fromIntegral) (10, 9) byteInc o pst   reachOffsetNoLine o pst =-    reachOffsetNoLine' B.splitAt B.foldl' (10, 9) o pst+    reachOffsetNoLine' B.splitAt B.foldl' (10, 9) byteInc o pst  instance TraversableStream BL.ByteString where   -- NOTE Do not eta-reduce these (breaks inlining)   reachOffset o pst =-    reachOffset' splitAtBL BL.foldl' BL8.unpack (chr . fromIntegral) (10, 9) o pst+    reachOffset' splitAtBL BL.foldl' BL8.unpack (chr . fromIntegral) (10, 9) byteInc o pst   reachOffsetNoLine o pst =-    reachOffsetNoLine' splitAtBL BL.foldl' (10, 9) o pst+    reachOffsetNoLine' splitAtBL BL.foldl' (10, 9) byteInc o pst  instance TraversableStream T.Text where   -- NOTE Do not eta-reduce (breaks inlining of reachOffset').   reachOffset o pst =-    reachOffset' T.splitAt T.foldl' T.unpack id ('\n', '\t') o pst+    reachOffset' T.splitAt T.foldl' T.unpack id ('\n', '\t') charInc o pst   reachOffsetNoLine o pst =-    reachOffsetNoLine' T.splitAt T.foldl' ('\n', '\t') o pst+    reachOffsetNoLine' T.splitAt T.foldl' ('\n', '\t') charInc o pst  instance TraversableStream TL.Text where   -- NOTE Do not eta-reduce (breaks inlining of reachOffset').   reachOffset o pst =-    reachOffset' splitAtTL TL.foldl' TL.unpack id ('\n', '\t') o pst+    reachOffset' splitAtTL TL.foldl' TL.unpack id ('\n', '\t') charInc o pst   reachOffsetNoLine o pst =-    reachOffsetNoLine' splitAtTL TL.foldl' ('\n', '\t') o pst+    reachOffsetNoLine' splitAtTL TL.foldl' ('\n', '\t') charInc o pst  ---------------------------------------------------------------------------- -- Helpers@@ -554,16 +560,18 @@ reachOffset' ::   forall s.   (Stream s) =>-  -- | How to split input stream at given offset+  -- | How to split the input stream at a given offset   (Int -> s -> (Tokens s, s)) ->-  -- | How to fold over input stream+  -- | How to fold over the input stream   (forall b. (b -> Token s -> b) -> b -> Tokens s -> b) ->-  -- | How to convert chunk of input stream into a 'String'+  -- | How to convert a chunk of the input stream into a 'String'   (Tokens s -> String) ->   -- | How to convert a token into a 'Char'   (Token s -> Char) ->   -- | Newline token and tab token   (Token s, Token s) ->+  -- | Update column position for a token+  (Token s -> Pos -> Pos) ->   -- | Offset to reach   Int ->   -- | Initial 'PosState' to use@@ -576,6 +584,7 @@   fromToks   fromTok   (newlineTok, tabTok)+  columnIncrement   o   PosState {..} =     ( Just $ case expandTab pstateTabWidth@@ -624,7 +633,7 @@                     (g . (fromTok ch :))               | otherwise ->                   St-                    (SourcePos n l (c <> pos1))+                    (SourcePos n l (columnIncrement ch c))                     (g . (fromTok ch :)) {-# INLINE reachOffset' #-} @@ -632,12 +641,14 @@ reachOffsetNoLine' ::   forall s.   (Stream s) =>-  -- | How to split input stream at given offset+  -- | How to split the input stream at a given offset   (Int -> s -> (Tokens s, s)) ->-  -- | How to fold over input stream+  -- | How to fold over the input stream   (forall b. (b -> Token s -> b) -> b -> Tokens s -> b) ->   -- | Newline token and tab token   (Token s, Token s) ->+  -- | Update column position for a token+  (Token s -> Pos -> Pos) ->   -- | Offset to reach   Int ->   -- | Initial 'PosState' to use@@ -648,6 +659,7 @@   splitAt'   foldl''   (newlineTok, tabTok)+  columnIncrement   o   PosState {..} =     ( PosState@@ -670,7 +682,7 @@               | ch == tabTok ->                   SourcePos n l (mkPos $ c' + w - ((c' - 1) `rem` w))               | otherwise ->-                  SourcePos n l (c <> pos1)+                  SourcePos n l (columnIncrement ch c) {-# INLINE reachOffsetNoLine' #-}  -- | Like 'BL.splitAt' but accepts the index as an 'Int'.@@ -683,8 +695,8 @@ splitAtTL n = TL.splitAt (fromIntegral n) {-# INLINE splitAtTL #-} --- | @stringPretty s@ returns pretty representation of string @s@. This is--- used when printing string tokens in error messages.+-- | @stringPretty s@ returns a pretty representation of the string @s@. This+-- is used when printing string tokens in error messages. stringPretty :: NonEmpty Char -> String stringPretty (x :| []) = charPretty x stringPretty ('\r' :| "\n") = "crlf newline"@@ -695,8 +707,8 @@         Nothing -> [ch]         Just pretty -> "<" <> pretty <> ">" --- | @charPretty ch@ returns user-friendly string representation of given--- character @ch@, suitable for using in error messages.+-- | @charPretty ch@ returns a user-friendly string representation of the+-- given character @ch@, suitable for use in error messages. charPretty :: Char -> String charPretty ' ' = "space" charPretty ch = fromMaybe ("'" <> [ch] <> "'") (charPretty' ch)@@ -741,7 +753,7 @@   '\160' -> Just "non-breaking space"   _ -> Nothing --- | Replace tab characters with given number of spaces.+-- | Replace tab characters with the given number of spaces. expandTab ::   Pos ->   String ->@@ -750,6 +762,23 @@   where     go _ 0 [] = []     go !i 0 ('\t' : xs) = go i (w - (i `rem` w)) xs-    go !i 0 (x : xs) = x : go (i + 1) 0 xs+    go !i 0 (x : xs) = x : go (i + Unicode.charLength x) 0 xs     go !i n xs = ' ' : go (i + 1) (n - 1) xs     w = unPos w'++-- | Return updated column position that corresponds to the given 'Char'.+charInc :: Char -> Pos -> Pos+charInc ch c =+  case Unicode.charLength ch of+    0 -> c+    2 -> c <> pos1 <> pos1+    _ -> c <> pos1++-- | Return updated column position that corresponds to the given 'Word8'.+byteInc :: Word8 -> Pos -> Pos+byteInc w c+  | w < 0x20 -- C0 control chars+      || (w >= 0x7f && w < 0xa0) -- DEL and C1 control chars+      || w == 0xad = -- soft hyphen+      c+  | otherwise = c <> pos1

@@ -0,0 +1,94 @@+{-# LANGUAGE Safe #-}++-- |+-- Module      :  Text.Megaparsec.Unicode+-- Copyright   :  © 2024–present Megaparsec contributors+-- License     :  FreeBSD+--+-- Maintainer  :  Mark Karpov <markkarpov92@gmail.com>+-- Stability   :  experimental+-- Portability :  portable+--+-- Utility functions for working with Unicode.+--+-- @since 9.7.0+module Text.Megaparsec.Unicode+  ( stringLength,+    charLength,+    isWideChar,+    isZeroWidthChar,+  )+where++import Data.Array (Array, bounds, (!))+import Data.Char (ord)+import Text.Megaparsec.Unicode.Tables++-- | Calculate the length of a string, taking into account the fact that+-- certain 'Char's may span more than 1 column.+--+-- @since 9.7.0+stringLength :: (Traversable t) => t Char -> Int+stringLength = sum . fmap charLength++-- | Return the length of an individual 'Char'.+--+-- @since 9.7.0+charLength :: Char -> Int+charLength ch+  | n < simpleCharLimit = if isSimpleZeroWidth n then 0 else 1+  -- The two tables are disjoint, so the order of the lookups only affects+  -- speed. Wide characters are looked up first because scripts that use+  -- them use them for nearly every character, while combining marks are+  -- interspersed with characters that are in neither table.+  | inRanges wideCharRanges n = 2+  | inRanges zeroWidthCharRanges n = 0+  | otherwise = 1+  where+    n = ord ch++-- | Determine whether the given 'Char' is “wide”, that is, whether it spans+-- 2 columns instead of one.+--+-- @since 9.7.0+isWideChar :: Char -> Bool+isWideChar ch = n >= simpleCharLimit && inRanges wideCharRanges n+  where+    n = ord ch++-- | Determine whether the given 'Char' is “zero-width”, that is, whether it+-- has no visible representation and does not advance the cursor position.+-- This includes control characters and certain Unicode zero-width+-- characters.+--+-- @since 9.8.0+isZeroWidthChar :: Char -> Bool+isZeroWidthChar ch+  | n < simpleCharLimit = isSimpleZeroWidth n+  | otherwise = inRanges zeroWidthCharRanges n+  where+    n = ord ch++-- | Decide whether a code point below 'simpleCharLimit' is zero-width. Only+-- the control characters and the soft hyphen are; the generator checks that+-- this agrees with the data it produces.+isSimpleZeroWidth :: Int -> Bool+isSimpleZeroWidth n =+  n < 0x20 -- C0 control chars+    || (n >= 0x7f && n <= 0x9f) -- DEL and C1 control chars+    || n == 0xad -- soft hyphen+{-# INLINE isSimpleZeroWidth #-}++-- | Look up a code point in a sorted collection of ranges that neither+-- overlap nor touch.+inRanges :: Array Int (Int, Int) -> Int -> Bool+inRanges ranges n = go (bounds ranges)+  where+    go (lo, hi)+      | hi < lo = False+      | a <= n && n <= b = True+      | n < a = go (lo, pred mid)+      | otherwise = go (succ mid, hi)+      where+        mid = (lo + hi) `div` 2+        (a, b) = ranges ! mid

@@ -0,0 +1,560 @@+{-# LANGUAGE Safe #-}++-- |+-- Module      :  Text.Megaparsec.Unicode.Tables+-- Copyright   :  © 2026–present Megaparsec contributors+-- License     :  FreeBSD+--+-- Maintainer  :  Mark Karpov <markkarpov92@gmail.com>+-- Stability   :  experimental+-- Portability :  portable+--+-- Character width data extracted from the Unicode Character+-- Database.+--+-- __This module is generated by @script\/GenUnicodeTables.hs@, do not+-- edit it by hand.__+module Text.Megaparsec.Unicode.Tables+  ( unicodeVersion,+    simpleCharLimit,+    wideCharRanges,+    zeroWidthCharRanges,+  )+where++import Data.Array (Array, listArray)++-- | The version of the Unicode Character Database that the tables in+-- this module were extracted from.+unicodeVersion :: String+unicodeVersion = "17.0.0"++-- | Below this code point a character is neither wide nor zero-width,+-- with the exception of the C0 and C1 control characters and the soft+-- hyphen. This is what allows the common case to avoid a table lookup+-- altogether.+simpleCharLimit :: Int+simpleCharLimit = 0x000300++-- | Ranges of characters that span two columns, that is, those whose+-- East Asian Width is Wide or Fullwidth. Zero-width characters are+-- excluded, so the two tables are disjoint.+wideCharRanges :: Array Int (Int, Int)+wideCharRanges =+  listArray+    (0, 123)+    [ (0x001100, 0x00115f),+      (0x00231a, 0x00231b),+      (0x002329, 0x00232a),+      (0x0023e9, 0x0023ec),+      (0x0023f0, 0x0023f0),+      (0x0023f3, 0x0023f3),+      (0x0025fd, 0x0025fe),+      (0x002614, 0x002615),+      (0x002630, 0x002637),+      (0x002648, 0x002653),+      (0x00267f, 0x00267f),+      (0x00268a, 0x00268f),+      (0x002693, 0x002693),+      (0x0026a1, 0x0026a1),+      (0x0026aa, 0x0026ab),+      (0x0026bd, 0x0026be),+      (0x0026c4, 0x0026c5),+      (0x0026ce, 0x0026ce),+      (0x0026d4, 0x0026d4),+      (0x0026ea, 0x0026ea),+      (0x0026f2, 0x0026f3),+      (0x0026f5, 0x0026f5),+      (0x0026fa, 0x0026fa),+      (0x0026fd, 0x0026fd),+      (0x002705, 0x002705),+      (0x00270a, 0x00270b),+      (0x002728, 0x002728),+      (0x00274c, 0x00274c),+      (0x00274e, 0x00274e),+      (0x002753, 0x002755),+      (0x002757, 0x002757),+      (0x002795, 0x002797),+      (0x0027b0, 0x0027b0),+      (0x0027bf, 0x0027bf),+      (0x002b1b, 0x002b1c),+      (0x002b50, 0x002b50),+      (0x002b55, 0x002b55),+      (0x002e80, 0x002e99),+      (0x002e9b, 0x002ef3),+      (0x002f00, 0x002fd5),+      (0x002ff0, 0x003029),+      (0x00302e, 0x00303e),+      (0x003041, 0x003096),+      (0x00309b, 0x0030ff),+      (0x003105, 0x00312f),+      (0x003131, 0x00318e),+      (0x003190, 0x0031e5),+      (0x0031ef, 0x00321e),+      (0x003220, 0x003247),+      (0x003250, 0x00a48c),+      (0x00a490, 0x00a4c6),+      (0x00a960, 0x00a97c),+      (0x00ac00, 0x00d7a3),+      (0x00f900, 0x00faff),+      (0x00fe10, 0x00fe19),+      (0x00fe30, 0x00fe52),+      (0x00fe54, 0x00fe66),+      (0x00fe68, 0x00fe6b),+      (0x00ff01, 0x00ff60),+      (0x00ffe0, 0x00ffe6),+      (0x016fe0, 0x016fe3),+      (0x016ff0, 0x016ff6),+      (0x017000, 0x018cd5),+      (0x018cff, 0x018d1e),+      (0x018d80, 0x018df2),+      (0x01aff0, 0x01aff3),+      (0x01aff5, 0x01affb),+      (0x01affd, 0x01affe),+      (0x01b000, 0x01b122),+      (0x01b132, 0x01b132),+      (0x01b150, 0x01b152),+      (0x01b155, 0x01b155),+      (0x01b164, 0x01b167),+      (0x01b170, 0x01b2fb),+      (0x01d300, 0x01d356),+      (0x01d360, 0x01d376),+      (0x01f004, 0x01f004),+      (0x01f0cf, 0x01f0cf),+      (0x01f18e, 0x01f18e),+      (0x01f191, 0x01f19a),+      (0x01f200, 0x01f202),+      (0x01f210, 0x01f23b),+      (0x01f240, 0x01f248),+      (0x01f250, 0x01f251),+      (0x01f260, 0x01f265),+      (0x01f300, 0x01f320),+      (0x01f32d, 0x01f335),+      (0x01f337, 0x01f37c),+      (0x01f37e, 0x01f393),+      (0x01f3a0, 0x01f3ca),+      (0x01f3cf, 0x01f3d3),+      (0x01f3e0, 0x01f3f0),+      (0x01f3f4, 0x01f3f4),+      (0x01f3f8, 0x01f43e),+      (0x01f440, 0x01f440),+      (0x01f442, 0x01f4fc),+      (0x01f4ff, 0x01f53d),+      (0x01f54b, 0x01f54e),+      (0x01f550, 0x01f567),+      (0x01f57a, 0x01f57a),+      (0x01f595, 0x01f596),+      (0x01f5a4, 0x01f5a4),+      (0x01f5fb, 0x01f64f),+      (0x01f680, 0x01f6c5),+      (0x01f6cc, 0x01f6cc),+      (0x01f6d0, 0x01f6d2),+      (0x01f6d5, 0x01f6d8),+      (0x01f6dc, 0x01f6df),+      (0x01f6eb, 0x01f6ec),+      (0x01f6f4, 0x01f6fc),+      (0x01f7e0, 0x01f7eb),+      (0x01f7f0, 0x01f7f0),+      (0x01f90c, 0x01f93a),+      (0x01f93c, 0x01f945),+      (0x01f947, 0x01f9ff),+      (0x01fa70, 0x01fa7c),+      (0x01fa80, 0x01fa8a),+      (0x01fa8e, 0x01fac6),+      (0x01fac8, 0x01fac8),+      (0x01facd, 0x01fadc),+      (0x01fadf, 0x01faea),+      (0x01faef, 0x01faf8),+      (0x020000, 0x02fffd),+      (0x030000, 0x03fffd)+    ]+{-# NOINLINE wideCharRanges #-}++-- | Ranges of characters that take up no space at all: control+-- characters, non-spacing and enclosing marks, formatting characters,+-- and conjoining Hangul jamo of the medial and final kinds.+zeroWidthCharRanges :: Array Int (Int, Int)+zeroWidthCharRanges =+  listArray+    (0, 378)+    [ (0x000000, 0x00001f),+      (0x00007f, 0x00009f),+      (0x0000ad, 0x0000ad),+      (0x000300, 0x00036f),+      (0x000483, 0x000489),+      (0x000591, 0x0005bd),+      (0x0005bf, 0x0005bf),+      (0x0005c1, 0x0005c2),+      (0x0005c4, 0x0005c5),+      (0x0005c7, 0x0005c7),+      (0x000600, 0x000605),+      (0x000610, 0x00061a),+      (0x00061c, 0x00061c),+      (0x00064b, 0x00065f),+      (0x000670, 0x000670),+      (0x0006d6, 0x0006dd),+      (0x0006df, 0x0006e4),+      (0x0006e7, 0x0006e8),+      (0x0006ea, 0x0006ed),+      (0x00070f, 0x00070f),+      (0x000711, 0x000711),+      (0x000730, 0x00074a),+      (0x0007a6, 0x0007b0),+      (0x0007eb, 0x0007f3),+      (0x0007fd, 0x0007fd),+      (0x000816, 0x000819),+      (0x00081b, 0x000823),+      (0x000825, 0x000827),+      (0x000829, 0x00082d),+      (0x000859, 0x00085b),+      (0x000890, 0x000891),+      (0x000897, 0x00089f),+      (0x0008ca, 0x000902),+      (0x00093a, 0x00093a),+      (0x00093c, 0x00093c),+      (0x000941, 0x000948),+      (0x00094d, 0x00094d),+      (0x000951, 0x000957),+      (0x000962, 0x000963),+      (0x000981, 0x000981),+      (0x0009bc, 0x0009bc),+      (0x0009c1, 0x0009c4),+      (0x0009cd, 0x0009cd),+      (0x0009e2, 0x0009e3),+      (0x0009fe, 0x0009fe),+      (0x000a01, 0x000a02),+      (0x000a3c, 0x000a3c),+      (0x000a41, 0x000a42),+      (0x000a47, 0x000a48),+      (0x000a4b, 0x000a4d),+      (0x000a51, 0x000a51),+      (0x000a70, 0x000a71),+      (0x000a75, 0x000a75),+      (0x000a81, 0x000a82),+      (0x000abc, 0x000abc),+      (0x000ac1, 0x000ac5),+      (0x000ac7, 0x000ac8),+      (0x000acd, 0x000acd),+      (0x000ae2, 0x000ae3),+      (0x000afa, 0x000aff),+      (0x000b01, 0x000b01),+      (0x000b3c, 0x000b3c),+      (0x000b3f, 0x000b3f),+      (0x000b41, 0x000b44),+      (0x000b4d, 0x000b4d),+      (0x000b55, 0x000b56),+      (0x000b62, 0x000b63),+      (0x000b82, 0x000b82),+      (0x000bc0, 0x000bc0),+      (0x000bcd, 0x000bcd),+      (0x000c00, 0x000c00),+      (0x000c04, 0x000c04),+      (0x000c3c, 0x000c3c),+      (0x000c3e, 0x000c40),+      (0x000c46, 0x000c48),+      (0x000c4a, 0x000c4d),+      (0x000c55, 0x000c56),+      (0x000c62, 0x000c63),+      (0x000c81, 0x000c81),+      (0x000cbc, 0x000cbc),+      (0x000cbf, 0x000cbf),+      (0x000cc6, 0x000cc6),+      (0x000ccc, 0x000ccd),+      (0x000ce2, 0x000ce3),+      (0x000d00, 0x000d01),+      (0x000d3b, 0x000d3c),+      (0x000d41, 0x000d44),+      (0x000d4d, 0x000d4d),+      (0x000d62, 0x000d63),+      (0x000d81, 0x000d81),+      (0x000dca, 0x000dca),+      (0x000dd2, 0x000dd4),+      (0x000dd6, 0x000dd6),+      (0x000e31, 0x000e31),+      (0x000e34, 0x000e3a),+      (0x000e47, 0x000e4e),+      (0x000eb1, 0x000eb1),+      (0x000eb4, 0x000ebc),+      (0x000ec8, 0x000ece),+      (0x000f18, 0x000f19),+      (0x000f35, 0x000f35),+      (0x000f37, 0x000f37),+      (0x000f39, 0x000f39),+      (0x000f71, 0x000f7e),+      (0x000f80, 0x000f84),+      (0x000f86, 0x000f87),+      (0x000f8d, 0x000f97),+      (0x000f99, 0x000fbc),+      (0x000fc6, 0x000fc6),+      (0x00102d, 0x001030),+      (0x001032, 0x001037),+      (0x001039, 0x00103a),+      (0x00103d, 0x00103e),+      (0x001058, 0x001059),+      (0x00105e, 0x001060),+      (0x001071, 0x001074),+      (0x001082, 0x001082),+      (0x001085, 0x001086),+      (0x00108d, 0x00108d),+      (0x00109d, 0x00109d),+      (0x001160, 0x0011ff),+      (0x00135d, 0x00135f),+      (0x001712, 0x001714),+      (0x001732, 0x001733),+      (0x001752, 0x001753),+      (0x001772, 0x001773),+      (0x0017b4, 0x0017b5),+      (0x0017b7, 0x0017bd),+      (0x0017c6, 0x0017c6),+      (0x0017c9, 0x0017d3),+      (0x0017dd, 0x0017dd),+      (0x00180b, 0x00180f),+      (0x001885, 0x001886),+      (0x0018a9, 0x0018a9),+      (0x001920, 0x001922),+      (0x001927, 0x001928),+      (0x001932, 0x001932),+      (0x001939, 0x00193b),+      (0x001a17, 0x001a18),+      (0x001a1b, 0x001a1b),+      (0x001a56, 0x001a56),+      (0x001a58, 0x001a5e),+      (0x001a60, 0x001a60),+      (0x001a62, 0x001a62),+      (0x001a65, 0x001a6c),+      (0x001a73, 0x001a7c),+      (0x001a7f, 0x001a7f),+      (0x001ab0, 0x001add),+      (0x001ae0, 0x001aeb),+      (0x001b00, 0x001b03),+      (0x001b34, 0x001b34),+      (0x001b36, 0x001b3a),+      (0x001b3c, 0x001b3c),+      (0x001b42, 0x001b42),+      (0x001b6b, 0x001b73),+      (0x001b80, 0x001b81),+      (0x001ba2, 0x001ba5),+      (0x001ba8, 0x001ba9),+      (0x001bab, 0x001bad),+      (0x001be6, 0x001be6),+      (0x001be8, 0x001be9),+      (0x001bed, 0x001bed),+      (0x001bef, 0x001bf1),+      (0x001c2c, 0x001c33),+      (0x001c36, 0x001c37),+      (0x001cd0, 0x001cd2),+      (0x001cd4, 0x001ce0),+      (0x001ce2, 0x001ce8),+      (0x001ced, 0x001ced),+      (0x001cf4, 0x001cf4),+      (0x001cf8, 0x001cf9),+      (0x001dc0, 0x001dff),+      (0x00200b, 0x00200f),+      (0x00202a, 0x00202e),+      (0x002060, 0x002064),+      (0x002066, 0x00206f),+      (0x0020d0, 0x0020f0),+      (0x002cef, 0x002cf1),+      (0x002d7f, 0x002d7f),+      (0x002de0, 0x002dff),+      (0x00302a, 0x00302d),+      (0x003099, 0x00309a),+      (0x00a66f, 0x00a672),+      (0x00a674, 0x00a67d),+      (0x00a69e, 0x00a69f),+      (0x00a6f0, 0x00a6f1),+      (0x00a802, 0x00a802),+      (0x00a806, 0x00a806),+      (0x00a80b, 0x00a80b),+      (0x00a825, 0x00a826),+      (0x00a82c, 0x00a82c),+      (0x00a8c4, 0x00a8c5),+      (0x00a8e0, 0x00a8f1),+      (0x00a8ff, 0x00a8ff),+      (0x00a926, 0x00a92d),+      (0x00a947, 0x00a951),+      (0x00a980, 0x00a982),+      (0x00a9b3, 0x00a9b3),+      (0x00a9b6, 0x00a9b9),+      (0x00a9bc, 0x00a9bd),+      (0x00a9e5, 0x00a9e5),+      (0x00aa29, 0x00aa2e),+      (0x00aa31, 0x00aa32),+      (0x00aa35, 0x00aa36),+      (0x00aa43, 0x00aa43),+      (0x00aa4c, 0x00aa4c),+      (0x00aa7c, 0x00aa7c),+      (0x00aab0, 0x00aab0),+      (0x00aab2, 0x00aab4),+      (0x00aab7, 0x00aab8),+      (0x00aabe, 0x00aabf),+      (0x00aac1, 0x00aac1),+      (0x00aaec, 0x00aaed),+      (0x00aaf6, 0x00aaf6),+      (0x00abe5, 0x00abe5),+      (0x00abe8, 0x00abe8),+      (0x00abed, 0x00abed),+      (0x00fb1e, 0x00fb1e),+      (0x00fe00, 0x00fe0f),+      (0x00fe20, 0x00fe2f),+      (0x00feff, 0x00feff),+      (0x00fff9, 0x00fffb),+      (0x0101fd, 0x0101fd),+      (0x0102e0, 0x0102e0),+      (0x010376, 0x01037a),+      (0x010a01, 0x010a03),+      (0x010a05, 0x010a06),+      (0x010a0c, 0x010a0f),+      (0x010a38, 0x010a3a),+      (0x010a3f, 0x010a3f),+      (0x010ae5, 0x010ae6),+      (0x010d24, 0x010d27),+      (0x010d69, 0x010d6d),+      (0x010eab, 0x010eac),+      (0x010efa, 0x010eff),+      (0x010f46, 0x010f50),+      (0x010f82, 0x010f85),+      (0x011001, 0x011001),+      (0x011038, 0x011046),+      (0x011070, 0x011070),+      (0x011073, 0x011074),+      (0x01107f, 0x011081),+      (0x0110b3, 0x0110b6),+      (0x0110b9, 0x0110ba),+      (0x0110bd, 0x0110bd),+      (0x0110c2, 0x0110c2),+      (0x0110cd, 0x0110cd),+      (0x011100, 0x011102),+      (0x011127, 0x01112b),+      (0x01112d, 0x011134),+      (0x011173, 0x011173),+      (0x011180, 0x011181),+      (0x0111b6, 0x0111be),+      (0x0111c9, 0x0111cc),+      (0x0111cf, 0x0111cf),+      (0x01122f, 0x011231),+      (0x011234, 0x011234),+      (0x011236, 0x011237),+      (0x01123e, 0x01123e),+      (0x011241, 0x011241),+      (0x0112df, 0x0112df),+      (0x0112e3, 0x0112ea),+      (0x011300, 0x011301),+      (0x01133b, 0x01133c),+      (0x011340, 0x011340),+      (0x011366, 0x01136c),+      (0x011370, 0x011374),+      (0x0113bb, 0x0113c0),+      (0x0113ce, 0x0113ce),+      (0x0113d0, 0x0113d0),+      (0x0113d2, 0x0113d2),+      (0x0113e1, 0x0113e2),+      (0x011438, 0x01143f),+      (0x011442, 0x011444),+      (0x011446, 0x011446),+      (0x01145e, 0x01145e),+      (0x0114b3, 0x0114b8),+      (0x0114ba, 0x0114ba),+      (0x0114bf, 0x0114c0),+      (0x0114c2, 0x0114c3),+      (0x0115b2, 0x0115b5),+      (0x0115bc, 0x0115bd),+      (0x0115bf, 0x0115c0),+      (0x0115dc, 0x0115dd),+      (0x011633, 0x01163a),+      (0x01163d, 0x01163d),+      (0x01163f, 0x011640),+      (0x0116ab, 0x0116ab),+      (0x0116ad, 0x0116ad),+      (0x0116b0, 0x0116b5),+      (0x0116b7, 0x0116b7),+      (0x01171d, 0x01171d),+      (0x01171f, 0x01171f),+      (0x011722, 0x011725),+      (0x011727, 0x01172b),+      (0x01182f, 0x011837),+      (0x011839, 0x01183a),+      (0x01193b, 0x01193c),+      (0x01193e, 0x01193e),+      (0x011943, 0x011943),+      (0x0119d4, 0x0119d7),+      (0x0119da, 0x0119db),+      (0x0119e0, 0x0119e0),+      (0x011a01, 0x011a0a),+      (0x011a33, 0x011a38),+      (0x011a3b, 0x011a3e),+      (0x011a47, 0x011a47),+      (0x011a51, 0x011a56),+      (0x011a59, 0x011a5b),+      (0x011a8a, 0x011a96),+      (0x011a98, 0x011a99),+      (0x011b60, 0x011b60),+      (0x011b62, 0x011b64),+      (0x011b66, 0x011b66),+      (0x011c30, 0x011c36),+      (0x011c38, 0x011c3d),+      (0x011c3f, 0x011c3f),+      (0x011c92, 0x011ca7),+      (0x011caa, 0x011cb0),+      (0x011cb2, 0x011cb3),+      (0x011cb5, 0x011cb6),+      (0x011d31, 0x011d36),+      (0x011d3a, 0x011d3a),+      (0x011d3c, 0x011d3d),+      (0x011d3f, 0x011d45),+      (0x011d47, 0x011d47),+      (0x011d90, 0x011d91),+      (0x011d95, 0x011d95),+      (0x011d97, 0x011d97),+      (0x011ef3, 0x011ef4),+      (0x011f00, 0x011f01),+      (0x011f36, 0x011f3a),+      (0x011f40, 0x011f40),+      (0x011f42, 0x011f42),+      (0x011f5a, 0x011f5a),+      (0x013430, 0x013440),+      (0x013447, 0x013455),+      (0x01611e, 0x016129),+      (0x01612d, 0x01612f),+      (0x016af0, 0x016af4),+      (0x016b30, 0x016b36),+      (0x016f4f, 0x016f4f),+      (0x016f8f, 0x016f92),+      (0x016fe4, 0x016fe4),+      (0x01bc9d, 0x01bc9e),+      (0x01bca0, 0x01bca3),+      (0x01cf00, 0x01cf2d),+      (0x01cf30, 0x01cf46),+      (0x01d167, 0x01d169),+      (0x01d173, 0x01d182),+      (0x01d185, 0x01d18b),+      (0x01d1aa, 0x01d1ad),+      (0x01d242, 0x01d244),+      (0x01da00, 0x01da36),+      (0x01da3b, 0x01da6c),+      (0x01da75, 0x01da75),+      (0x01da84, 0x01da84),+      (0x01da9b, 0x01da9f),+      (0x01daa1, 0x01daaf),+      (0x01e000, 0x01e006),+      (0x01e008, 0x01e018),+      (0x01e01b, 0x01e021),+      (0x01e023, 0x01e024),+      (0x01e026, 0x01e02a),+      (0x01e08f, 0x01e08f),+      (0x01e130, 0x01e136),+      (0x01e2ae, 0x01e2ae),+      (0x01e2ec, 0x01e2ef),+      (0x01e4ec, 0x01e4ef),+      (0x01e5ee, 0x01e5ef),+      (0x01e6e3, 0x01e6e3),+      (0x01e6e6, 0x01e6e6),+      (0x01e6ee, 0x01e6ef),+      (0x01e6f5, 0x01e6f5),+      (0x01e8d0, 0x01e8d6),+      (0x01e944, 0x01e94a),+      (0x0e0001, 0x0e0001),+      (0x0e0020, 0x0e007f),+      (0x0e0100, 0x0e01ef)+    ]+{-# NOINLINE zeroWidthCharRanges #-}

@@ -1,6 +1,6 @@ cabal-version:   2.4 name:            megaparsec-version:         9.6.1+version:         9.8.2 license:         BSD-2-Clause license-file:    LICENSE.md maintainer:      Mark Karpov <markkarpov92@gmail.com>@@ -9,7 +9,9 @@     Paolo Martini <paolo@nemail.it>,     Daan Leijen <daan@microsoft.com> -tested-with:     ghc ==9.4.7 ghc ==9.6.3 ghc ==9.8.1+tested-with:+    ghc ==9.6.7 ghc ==9.8.4 ghc ==9.10.3 ghc ==9.12.4 ghc ==9.14.1+ homepage:        https://github.com/mrkkrp/megaparsec bug-reports:     https://github.com/mrkkrp/megaparsec/issues synopsis:        Monadic parser combinators@@ -48,18 +50,21 @@         Text.Megaparsec.Pos         Text.Megaparsec.State         Text.Megaparsec.Stream+        Text.Megaparsec.Unicode      other-modules:         Text.Megaparsec.Class         Text.Megaparsec.Common         Text.Megaparsec.Lexer+        Text.Megaparsec.Unicode.Tables      default-language: Haskell2010     build-depends:-        base >=4.15 && <5,+        array >=0.5.3 && <0.6,+        base >=4.18 && <5,         bytestring >=0.2 && <0.13,         case-insensitive >=1.2 && <1.3,-        containers >=0.5 && <0.8,+        containers >=0.5 && <0.9,         deepseq >=1.3 && <1.6,         mtl >=2.2.2 && <3,         parser-combinators >=1.0 && <2,@@ -70,7 +75,7 @@     if flag(dev)         ghc-options:             -Wall -Werror -Wredundant-constraints -Wpartial-fields-            -Wunused-packages+            -Wunused-packages -haddock -Winvalid-haddock      else         ghc-options: -O2 -Wall@@ -84,9 +89,9 @@     hs-source-dirs:   bench/speed     default-language: Haskell2010     build-depends:-        base >=4.15 && <5,+        base >=4.18 && <5,         bytestring >=0.2 && <0.13,-        containers >=0.5 && <0.8,+        containers >=0.5 && <0.9,         criterion >=0.6.2.1 && <1.7,         deepseq >=1.3 && <1.6,         megaparsec,@@ -95,7 +100,7 @@     if flag(dev)         ghc-options:             -Wall -Werror -Wredundant-constraints -Wpartial-fields-            -Wunused-packages+            -Wunused-packages -haddock -Winvalid-haddock      else         ghc-options: -O2 -Wall@@ -106,9 +111,9 @@     hs-source-dirs:   bench/memory     default-language: Haskell2010     build-depends:-        base >=4.15 && <5,+        base >=4.18 && <5,         bytestring >=0.2 && <0.13,-        containers >=0.5 && <0.8,+        containers >=0.5 && <0.9,         deepseq >=1.3 && <1.6,         megaparsec,         text >=0.2 && <2.2,@@ -117,7 +122,7 @@     if flag(dev)         ghc-options:             -Wall -Werror -Wredundant-constraints -Wpartial-fields-            -Wunused-packages+            -Wunused-packages -haddock -Winvalid-haddock      else         ghc-options: -O2 -Wall