DBus 0.1 → 0.2
raw patch · 11 files changed
+3030/−303 lines, 11 filesdep +bytestringsetup-changednew-uploader
Dependencies added: bytestring
Files
- DBus.buildinfo.in +0/−2
- DBus.cabal +16/−29
- DBus/Connection.hsc +15/−4
- DBus/Message.hsc +131/−12
- README +0/−25
- Setup.hs +2/−0
- Setup.lhs +0/−3
- configure +2866/−0
- demo/Demo.hs +0/−84
- demo/Monitor.hs +0/−132
- doc-prologue.txt +0/−12
− DBus.buildinfo.in
@@ -1,2 +0,0 @@-cc-options: @DBUS_CFLAGS@-ld-options: @DBUS_LIBS@
DBus.cabal view
@@ -1,33 +1,20 @@-name: DBus-version: 0.1--license: BSD3-license-file: LICENSE-copyright: Copyright (C) 2006 Evan Martin <martine@danga.com>-author: Evan Martin <martine@danga.com>-maintainer: Unmaintained--stability: Experimental-Category: System-synopsis: DBus bindings-description: Bindings for the D-Bus API.+name: DBus+version: 0.2+license: BSD3+license-file: LICENSE+copyright: Copyright (C) 2006 Evan Martin <martine@danga.com>+ 2008 David Himmelstrup <lemmih@gmail.com>+author: Evan Martin <martine@danga.com>, David Himmelstrup <lemmih@gmail.com>+homepage: http://neugierig.org/software/hdbus+synopsis: DBus bindings+description: Bindings for the D-Bus API. For details on D-Bus, see the D-Bus wiki at: <http://www.freedesktop.org/wiki/Software/dbus>- .- It's worth noting that this binding is not stable or- even well-tested at all. Use this library at your own risk.-homepage: http://neugierig.org/software/hdbus--build-depends: base-build-type: Simple-tested-with: GHC==6.8.2-+build-depends: base, bytestring+build-type: Configure+extensions: ForeignFunctionInterface, OverlappingInstances,+ ExistentialQuantification exposed-modules: DBus, DBus.Message, DBus.Connection other-modules: DBus.Internal, DBus.Shared--extensions: ForeignFunctionInterface, OverlappingInstances,- ExistentialQuantification, PatternSignatures,- ScopedTypeVariables, FlexibleInstances, TypeSynonymInstances--data-files: README, doc-prologue.txt-extra-source-files: configure.ac, DBus.buildinfo.in, demo/Demo.hs, demo/Monitor.hs+extra-source-files: configure configure.ac+extra-tmp-files: autom4te.cache config.log config.status DBus.buildinfo
DBus/Connection.hsc view
@@ -8,7 +8,7 @@ -- * Connection Basics Connection, BusType(..),- busGet,+ busGet, busConnectionUnref, send, sendWithReplyAndBlock, flush, close, withConnection,@@ -32,16 +32,26 @@ type Connection = ForeignPtr ConnectionTag -data BusType = Session -- ^The login session bus.- | System -- ^The systemwide bus.+-- |Multiple buses may be active simultaneously on a single system.+-- The BusType indicates which one to use.+data BusType = Session -- ^The session bus is restricted to the user's current+ -- GNOME session.+ | System -- ^This bus is system-wide. | Starter -- ^The bus that started us, if any. foreign import ccall unsafe "&dbus_connection_unref" connection_unref :: FunPtr (ConnectionP -> IO ())+ connectionPTOConnection conn = do when (conn == nullPtr) $ fail "null connection" newForeignPtr connection_unref conn +-- |Force the dereference of a connection. Note that this is usually not+-- necessary since the connections are garbage collected automatically.+busConnectionUnref :: Connection -> IO ()+busConnectionUnref = finalizeForeignPtr++ foreign import ccall unsafe "dbus_bus_get" bus_get :: CInt -> ErrorP -> IO ConnectionP -- |Connect to a standard bus.@@ -67,6 +77,7 @@ -- |Close a connection. A connection must be closed before its last -- reference disappears.+-- You may not close a connection created with @busGet@. foreign import ccall unsafe "dbus_connection_close" connection_close :: ConnectionP -> IO () close :: Connection -> IO ()@@ -75,7 +86,7 @@ -- |Open a connection and run an IO action, ensuring it is properly closed when -- you're done. withConnection :: BusType -> (Connection -> IO a) -> IO a-withConnection bt = bracket (busGet bt) close+withConnection bt = bracket (busGet bt) busConnectionUnref foreign import ccall unsafe "dbus_connection_send" connection_send :: ConnectionP -> MessageP -> Ptr Word32 -> IO Bool
DBus/Message.hsc view
@@ -1,4 +1,5 @@-{-# LANGUAGE ScopedTypeVariables, FlexibleInstances, TypeSynonymInstances #-}+{-# LANGUAGE PatternSignatures, TypeSynonymInstances, FlexibleInstances #-}+{-# OPTIONS -fglasgow-exts #-} -- HDBus -- Haskell bindings for D-Bus. -- Copyright (C) 2006 Evan Martin <martine@danga.com> @@ -16,6 +17,9 @@ getDestination, getSender, -- * Arguments+ Arg(..), args, addArgs,+ signature, stringSig, variantSig+{- Arg(..), args, addArgs, -- ** Dictionaries@@ -26,19 +30,25 @@ -- | Some D-Bus functions allow variants, which are similar to -- 'Data.Dynamic' dynamics but restricted to D-Bus data types. Variant, variant+-} ) where import Control.Monad (when) import Data.Int import Data.Word+import Data.Char import Data.Dynamic import Foreign import Foreign.C.String import Foreign.C.Types (CInt)+import System.IO.Unsafe import DBus.Internal import DBus.Shared +import qualified Data.ByteString as B+import qualified Data.ByteString.Internal as B+ type Message = ForeignPtr MessageTag foreign import ccall unsafe "dbus_message_new_signal"@@ -110,6 +120,106 @@ type IterTag = () type Iter = Ptr IterTag ++data Arg = Byte Word8 | Boolean Bool | Int16 Int16 | Word16 Word16 | Int32 Int32 | Word32 Word32+ | Int64 Int64 | Word64 Word64 | Double Double | String String | ObjectPath {- ? -}+ | TypeSignature {- ? -} | Array String [Arg] | Variant Arg | Struct {- ? -} | DictEntry Arg Arg+ | ByteString B.ByteString | Invalid+ deriving (Show,Read,Typeable)++stringSig :: String+stringSig = signature String{}++variantSig = signature Variant{}++signature Byte{} = #{const_str DBUS_TYPE_BYTE_AS_STRING}+signature Boolean{} = #{const_str DBUS_TYPE_BOOLEAN_AS_STRING}+signature Int32{} = #{const_str DBUS_TYPE_INT32_AS_STRING}+signature (Array sig _) = #{const_str DBUS_TYPE_ARRAY_AS_STRING} ++ sig+signature ByteString{} = signature (Array (signature (Byte 0)) [])+signature (DictEntry argA argB) = "{"++signature argA ++ signature argB ++ "}"+signature Variant{} = #{const_str DBUS_TYPE_VARIANT_AS_STRING}+signature String{} = #{const_str DBUS_TYPE_STRING_AS_STRING}+signature arg = error $ "DBus.Message.signature: " ++ show arg++decodeArgs iter+ = let loop = unsafeInterleaveIO $+ do arg <- decodeArg iter+ has_next <- message_iter_next iter+ if has_next then fmap (arg:) loop+ else return [arg]+ in loop++decodeArg iter+ = do arg_type <- message_iter_get_arg_type iter+ case arg_type of+ #{const DBUS_TYPE_INT32} -> fmap Int32 getBasic+ #{const DBUS_TYPE_UINT32} -> fmap Word32 getBasic+ #{const DBUS_TYPE_STRING} -> fmap String (getBasic >>= peekCString)+ #{const DBUS_TYPE_ARRAY} -> decodeArray iter+ #{const DBUS_TYPE_BOOLEAN}-> fmap Boolean getBasic+ #{const DBUS_TYPE_INVALID}-> return Invalid+ _ -> error $ "Unknown argument type: " ++ show arg_type ++ " ("++show (chr arg_type)++")"+ where getBasic :: Storable a => IO a+ getBasic = alloca $ \ptr -> do+ message_iter_get_basic iter ptr+ peek ptr++decodeArray iter+ = withIter $ \sub ->+ do message_iter_recurse iter sub+ len <- message_iter_get_array_len iter+ elt_type <- message_iter_get_element_type iter+ case elt_type of+ #{const DBUS_TYPE_BYTE} -> if len > 0 then decodeByteArray iter+ else return $ ByteString B.empty+ _other -> withIter $ \sub ->+ do message_iter_recurse iter sub+ sig <- getIterSignature sub+ lst <- if len > 0 then getArray sub else return []+ return $ Array sig lst+ where getArray sub = do x <- decodeArg sub+ has_next <- message_iter_next sub+ if has_next+ then do xs <- getArray sub+ return (x:xs)+ else return [x]++decodeByteArray iter+ = alloca $ \elts_ptr ->+ alloca $ \n_ptr ->+ do message_iter_get_fixed_array iter elts_ptr n_ptr+ byte_ptr <- peek elts_ptr+ len <- peek n_ptr+ fptr <- newForeignPtr_ byte_ptr+ return $ ByteString $ B.fromForeignPtr fptr 0 (fromIntegral len)+++encodeArg iter arg+ = case arg of+ Int32 i32 -> putSimple #{const DBUS_TYPE_INT32} i32+ Word32 u32 -> putSimple #{const DBUS_TYPE_UINT32} u32+ String str -> withCString str $ \cstr -> putSimple #{const DBUS_TYPE_STRING} cstr+ Array sig lst -> encodeArray iter sig lst+ DictEntry argA argB -> encodeDict iter argA argB+ _ -> error $ "Can't encode argument: " ++ show arg+ where putSimple ty val = with val $ putBasic iter ty++encodeArray iter sig lst+ = withCString sig $ \csig ->+ withContainer iter #{const DBUS_TYPE_ARRAY} csig $ \sub ->+ mapM_ (encodeArg sub) lst++encodeDict iter argA argB+ = withContainer iter #{const DBUS_TYPE_DICT_ENTRY} nullPtr $ \sub ->+ do message_iter_recurse iter sub+ encodeArg sub argA+ encodeArg sub argB+++++{- class Show a => Arg a where toIter :: a -> Iter -> IO () fromIter :: Iter -> IO a@@ -126,14 +236,15 @@ when (arg_type /= expected_type) $ fail $ "Expected arg type " ++ show expected_type ++ " but got " ++ show arg_type-+-} putBasic iter typ val = catchOom (message_iter_append_basic iter typ val)+ withContainer iter typ sig f = withIter $ \sub -> do catchOom $ (message_iter_open_container iter typ sig sub) f sub catchOom $ (message_iter_close_container iter sub)-+{- instance Arg () where toIter _ _ = return () fromIter _ = return ()@@ -217,8 +328,8 @@ mapM_ (\v -> toIter v sub) arg signature a = "a" ++ signature (undefined :: a) --- instance (Show a,Show b,Show c,Show d,Show e,Show f,Show g,Show h) => Show (a,b,c,d,e,f,g,h) where--- show _ = "[show not implemented]"+--instance (Show a,Show b,Show c,Show d,Show e,Show f,Show g,Show h) => Show (a,b,c,d,e,f,g,h) where+-- show _ = "[show not implemented]" newtype DictEntry a b = DictEntry (a,b) instance (Show a, Show b) => Show (DictEntry a b) where@@ -354,7 +465,7 @@ loop xs iter in loop list iter signature _ = "d"-+-} foreign import ccall unsafe "dbus_message_iter_init" message_iter_init :: MessageP -> Iter -> IO Bool foreign import ccall unsafe "dbus_message_iter_init_append"@@ -363,6 +474,10 @@ message_iter_get_arg_type :: Iter -> IO Int foreign import ccall unsafe "dbus_message_iter_get_element_type" message_iter_get_element_type :: Iter -> IO Int+foreign import ccall unsafe "dbus_message_iter_get_fixed_array"+ message_iter_get_fixed_array :: Iter -> Ptr a -> Ptr CInt -> IO ()+foreign import ccall unsafe "dbus_message_iter_get_signature"+ message_iter_get_signature :: Iter -> IO CString foreign import ccall unsafe "dbus_message_iter_get_basic" message_iter_get_basic :: Iter -> Ptr a -> IO () foreign import ccall unsafe "dbus_message_iter_get_array_len"@@ -378,21 +493,25 @@ foreign import ccall unsafe "dbus_message_iter_close_container" message_iter_close_container :: Iter -> Iter -> IO Bool +getIterSignature :: Iter -> IO String+getIterSignature iter = message_iter_get_signature iter >>= peekCString+ withIter = allocaBytes #{size DBusMessageIter} -- |Retrieve the arguments from a message.-args :: (Arg a) => Message -> IO a-args msg =+args :: Message -> [Arg]+args msg = unsafePerformIO $ withForeignPtr msg $ \msg -> do withIter $ \iter -> do has_args <- message_iter_init msg iter- fromIter iter+ if has_args then decodeArgs iter+ else return [] -- |Add arguments to a message.-addArgs :: (Arg a) => Message -> a -> IO ()-addArgs msg arg =+addArgs :: Message -> [Arg] -> IO ()+addArgs msg args = withForeignPtr msg $ \msg -> allocInit #{size DBusMessageIter} (message_iter_init_append msg) $ \iter ->- toIterInternal arg iter+ mapM_ (encodeArg iter) args -- vim: set ts=2 sw=2 tw=72 et ft=haskell :
− README
@@ -1,25 +0,0 @@-HDBus -- Haskell bindings for D-Bus.-Copyright (C) 2006 Evan Martin <martine@danga.com>--== About-"D-Bus is a message bus system, a simple way for applications to talk to one-another." It's particularly popular on free software desktops (Gnome, KDE).-See http://www.freedesktop.org/wiki/Software/dbus for details.--== Installation-You must have the D-Bus headers and libraries installed.-Install on Debian-based systems with:- apt-get install libdbus-1-dev-Check your installation with:- pkg-config --modversion dbus-1--The module code is in module/, and it's the standard series of cabal steps:- runhaskell Setup.lhs configure- runhaskell Setup.lhs build- runhaskell Setup.lhs install--== How to Use it-See demo/Demo.hs for some example calls.--== License-BSD. See module/LICENSE for details.
+ Setup.hs view
@@ -0,0 +1,2 @@+import Distribution.Simple+main = defaultMain
− Setup.lhs
@@ -1,3 +0,0 @@-#!/usr/bin/runhaskell-> import Distribution.Simple-> main = defaultMainWithHooks autoconfUserHooks
+ configure view
@@ -0,0 +1,2866 @@+#! /bin/sh+# Guess values for system-dependent variables and create Makefiles.+# Generated by GNU Autoconf 2.61 for HDBus 0.1.+#+# Report bugs to <martine@danga.com>.+#+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.+# This configure script is free software; the Free Software Foundation+# gives unlimited permission to copy, distribute and modify it.+## --------------------- ##+## M4sh Initialization. ##+## --------------------- ##++# Be more Bourne compatible+DUALCASE=1; export DUALCASE # for MKS sh+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then+ emulate sh+ NULLCMD=:+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which+ # is contrary to our usage. Disable this feature.+ alias -g '${1+"$@"}'='"$@"'+ setopt NO_GLOB_SUBST+else+ case `(set -o) 2>/dev/null` in+ *posix*) set -o posix ;;+esac++fi+++++# PATH needs CR+# Avoid depending upon Character Ranges.+as_cr_letters='abcdefghijklmnopqrstuvwxyz'+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'+as_cr_Letters=$as_cr_letters$as_cr_LETTERS+as_cr_digits='0123456789'+as_cr_alnum=$as_cr_Letters$as_cr_digits++# The user is always right.+if test "${PATH_SEPARATOR+set}" != set; then+ echo "#! /bin/sh" >conf$$.sh+ echo "exit 0" >>conf$$.sh+ chmod +x conf$$.sh+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then+ PATH_SEPARATOR=';'+ else+ PATH_SEPARATOR=:+ fi+ rm -f conf$$.sh+fi++# Support unset when possible.+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then+ as_unset=unset+else+ as_unset=false+fi+++# IFS+# We need space, tab and new line, in precisely that order. Quoting is+# there to prevent editors from complaining about space-tab.+# (If _AS_PATH_WALK were called with IFS unset, it would disable word+# splitting by setting IFS to empty value.)+as_nl='+'+IFS=" "" $as_nl"++# Find who we are. Look in the path if we contain no directory separator.+case $0 in+ *[\\/]* ) as_myself=$0 ;;+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break+done+IFS=$as_save_IFS++ ;;+esac+# We did not find ourselves, most probably we were run as `sh COMMAND'+# in which case we are not to be found in the path.+if test "x$as_myself" = x; then+ as_myself=$0+fi+if test ! -f "$as_myself"; then+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2+ { (exit 1); exit 1; }+fi++# Work around bugs in pre-3.0 UWIN ksh.+for as_var in ENV MAIL MAILPATH+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var+done+PS1='$ '+PS2='> '+PS4='+ '++# NLS nuisances.+for as_var in \+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \+ LC_TELEPHONE LC_TIME+do+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then+ eval $as_var=C; export $as_var+ else+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var+ fi+done++# Required to use basename.+if expr a : '\(a\)' >/dev/null 2>&1 &&+ test "X`expr 00001 : '.*\(...\)'`" = X001; then+ as_expr=expr+else+ as_expr=false+fi++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then+ as_basename=basename+else+ as_basename=false+fi+++# Name of the executable.+as_me=`$as_basename -- "$0" ||+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \+ X"$0" : 'X\(//\)$' \| \+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||+echo X/"$0" |+ sed '/^.*\/\([^/][^/]*\)\/*$/{+ s//\1/+ q+ }+ /^X\/\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\/\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`++# CDPATH.+$as_unset CDPATH+++if test "x$CONFIG_SHELL" = x; then+ if (eval ":") 2>/dev/null; then+ as_have_required=yes+else+ as_have_required=no+fi++ if test $as_have_required = yes && (eval ":+(as_func_return () {+ (exit \$1)+}+as_func_success () {+ as_func_return 0+}+as_func_failure () {+ as_func_return 1+}+as_func_ret_success () {+ return 0+}+as_func_ret_failure () {+ return 1+}++exitcode=0+if as_func_success; then+ :+else+ exitcode=1+ echo as_func_success failed.+fi++if as_func_failure; then+ exitcode=1+ echo as_func_failure succeeded.+fi++if as_func_ret_success; then+ :+else+ exitcode=1+ echo as_func_ret_success failed.+fi++if as_func_ret_failure; then+ exitcode=1+ echo as_func_ret_failure succeeded.+fi++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then+ :+else+ exitcode=1+ echo positional parameters were not saved.+fi++test \$exitcode = 0) || { (exit 1); exit 1; }++(+ as_lineno_1=\$LINENO+ as_lineno_2=\$LINENO+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }+") 2> /dev/null; then+ :+else+ as_candidate_shells=+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ case $as_dir in+ /*)+ for as_base in sh bash ksh sh5; do+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"+ done;;+ esac+done+IFS=$as_save_IFS+++ for as_shell in $as_candidate_shells $SHELL; do+ # Try only shells that exist, to save several forks.+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&+ { ("$as_shell") 2> /dev/null <<\_ASEOF+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then+ emulate sh+ NULLCMD=:+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which+ # is contrary to our usage. Disable this feature.+ alias -g '${1+"$@"}'='"$@"'+ setopt NO_GLOB_SUBST+else+ case `(set -o) 2>/dev/null` in+ *posix*) set -o posix ;;+esac++fi+++:+_ASEOF+}; then+ CONFIG_SHELL=$as_shell+ as_have_required=yes+ if { "$as_shell" 2> /dev/null <<\_ASEOF+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then+ emulate sh+ NULLCMD=:+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which+ # is contrary to our usage. Disable this feature.+ alias -g '${1+"$@"}'='"$@"'+ setopt NO_GLOB_SUBST+else+ case `(set -o) 2>/dev/null` in+ *posix*) set -o posix ;;+esac++fi+++:+(as_func_return () {+ (exit $1)+}+as_func_success () {+ as_func_return 0+}+as_func_failure () {+ as_func_return 1+}+as_func_ret_success () {+ return 0+}+as_func_ret_failure () {+ return 1+}++exitcode=0+if as_func_success; then+ :+else+ exitcode=1+ echo as_func_success failed.+fi++if as_func_failure; then+ exitcode=1+ echo as_func_failure succeeded.+fi++if as_func_ret_success; then+ :+else+ exitcode=1+ echo as_func_ret_success failed.+fi++if as_func_ret_failure; then+ exitcode=1+ echo as_func_ret_failure succeeded.+fi++if ( set x; as_func_ret_success y && test x = "$1" ); then+ :+else+ exitcode=1+ echo positional parameters were not saved.+fi++test $exitcode = 0) || { (exit 1); exit 1; }++(+ as_lineno_1=$LINENO+ as_lineno_2=$LINENO+ test "x$as_lineno_1" != "x$as_lineno_2" &&+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }++_ASEOF+}; then+ break+fi++fi++ done++ if test "x$CONFIG_SHELL" != x; then+ for as_var in BASH_ENV ENV+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var+ done+ export CONFIG_SHELL+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}+fi+++ if test $as_have_required = no; then+ echo This script requires a shell more modern than all the+ echo shells that I found on your system. Please install a+ echo modern shell, or manually run the script under such a+ echo shell if you do have one.+ { (exit 1); exit 1; }+fi+++fi++fi++++(eval "as_func_return () {+ (exit \$1)+}+as_func_success () {+ as_func_return 0+}+as_func_failure () {+ as_func_return 1+}+as_func_ret_success () {+ return 0+}+as_func_ret_failure () {+ return 1+}++exitcode=0+if as_func_success; then+ :+else+ exitcode=1+ echo as_func_success failed.+fi++if as_func_failure; then+ exitcode=1+ echo as_func_failure succeeded.+fi++if as_func_ret_success; then+ :+else+ exitcode=1+ echo as_func_ret_success failed.+fi++if as_func_ret_failure; then+ exitcode=1+ echo as_func_ret_failure succeeded.+fi++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then+ :+else+ exitcode=1+ echo positional parameters were not saved.+fi++test \$exitcode = 0") || {+ echo No shell found that supports shell functions.+ echo Please tell autoconf@gnu.org about your system,+ echo including any error possibly output before this+ echo message+}++++ as_lineno_1=$LINENO+ as_lineno_2=$LINENO+ test "x$as_lineno_1" != "x$as_lineno_2" &&+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO+ # uniformly replaced by the line number. The first 'sed' inserts a+ # line-number line after each line using $LINENO; the second 'sed'+ # does the real work. The second script uses 'N' to pair each+ # line-number line with the line containing $LINENO, and appends+ # trailing '-' during substitution so that $LINENO is not a special+ # case at line end.+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the+ # scripts with optimization help from Paolo Bonzini. Blame Lee+ # E. McMahon (1931-1989) for sed's syntax. :-)+ sed -n '+ p+ /[$]LINENO/=+ ' <$as_myself |+ sed '+ s/[$]LINENO.*/&-/+ t lineno+ b+ :lineno+ N+ :loop+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/+ t loop+ s/-\n.*//+ ' >$as_me.lineno &&+ chmod +x "$as_me.lineno" ||+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2+ { (exit 1); exit 1; }; }++ # Don't try to exec as it changes $[0], causing all sort of problems+ # (the dirname of $[0] is not the place where we might find the+ # original and so on. Autoconf is especially sensitive to this).+ . "./$as_me.lineno"+ # Exit status is that of the last command.+ exit+}+++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then+ as_dirname=dirname+else+ as_dirname=false+fi++ECHO_C= ECHO_N= ECHO_T=+case `echo -n x` in+-n*)+ case `echo 'x\c'` in+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.+ *) ECHO_C='\c';;+ esac;;+*)+ ECHO_N='-n';;+esac++if expr a : '\(a\)' >/dev/null 2>&1 &&+ test "X`expr 00001 : '.*\(...\)'`" = X001; then+ as_expr=expr+else+ as_expr=false+fi++rm -f conf$$ conf$$.exe conf$$.file+if test -d conf$$.dir; then+ rm -f conf$$.dir/conf$$.file+else+ rm -f conf$$.dir+ mkdir conf$$.dir+fi+echo >conf$$.file+if ln -s conf$$.file conf$$ 2>/dev/null; then+ as_ln_s='ln -s'+ # ... but there are two gotchas:+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.+ # In both cases, we have to default to `cp -p'.+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||+ as_ln_s='cp -p'+elif ln conf$$.file conf$$ 2>/dev/null; then+ as_ln_s=ln+else+ as_ln_s='cp -p'+fi+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file+rmdir conf$$.dir 2>/dev/null++if mkdir -p . 2>/dev/null; then+ as_mkdir_p=:+else+ test -d ./-p && rmdir ./-p+ as_mkdir_p=false+fi++if test -x / >/dev/null 2>&1; then+ as_test_x='test -x'+else+ if ls -dL / >/dev/null 2>&1; then+ as_ls_L_option=L+ else+ as_ls_L_option=+ fi+ as_test_x='+ eval sh -c '\''+ if test -d "$1"; then+ test -d "$1/.";+ else+ case $1 in+ -*)set "./$1";;+ esac;+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in+ ???[sx]*):;;*)false;;esac;fi+ '\'' sh+ '+fi+as_executable_p=$as_test_x++# Sed expression to map a string onto a valid CPP name.+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"++# Sed expression to map a string onto a valid variable name.+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"++++exec 7<&0 </dev/null 6>&1++# Name of the host.+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,+# so uname gets run too.+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`++#+# Initializations.+#+ac_default_prefix=/usr/local+ac_clean_files=+ac_config_libobj_dir=.+LIBOBJS=+cross_compiling=no+subdirs=+MFLAGS=+MAKEFLAGS=+SHELL=${CONFIG_SHELL-/bin/sh}++# Identity of this package.+PACKAGE_NAME='HDBus'+PACKAGE_TARNAME='HDBus'+PACKAGE_VERSION='0.1'+PACKAGE_STRING='HDBus 0.1'+PACKAGE_BUGREPORT='martine@danga.com'++ac_unique_file="DBus.cabal"+ac_subst_vars='SHELL+PATH_SEPARATOR+PACKAGE_NAME+PACKAGE_TARNAME+PACKAGE_VERSION+PACKAGE_STRING+PACKAGE_BUGREPORT+exec_prefix+prefix+program_transform_name+bindir+sbindir+libexecdir+datarootdir+datadir+sysconfdir+sharedstatedir+localstatedir+includedir+oldincludedir+docdir+infodir+htmldir+dvidir+pdfdir+psdir+libdir+localedir+mandir+DEFS+ECHO_C+ECHO_N+ECHO_T+LIBS+build_alias+host_alias+target_alias+PKG_CONFIG+DBUS_CFLAGS+DBUS_LIBS+LIBOBJS+LTLIBOBJS'+ac_subst_files=''+ ac_precious_vars='build_alias+host_alias+target_alias+PKG_CONFIG+DBUS_CFLAGS+DBUS_LIBS'+++# Initialize some variables set by options.+ac_init_help=+ac_init_version=false+# The variables have the same names as the options, with+# dashes changed to underlines.+cache_file=/dev/null+exec_prefix=NONE+no_create=+no_recursion=+prefix=NONE+program_prefix=NONE+program_suffix=NONE+program_transform_name=s,x,x,+silent=+site=+srcdir=+verbose=+x_includes=NONE+x_libraries=NONE++# Installation directory options.+# These are left unexpanded so users can "make install exec_prefix=/foo"+# and all the variables that are supposed to be based on exec_prefix+# by default will actually change.+# Use braces instead of parens because sh, perl, etc. also accept them.+# (The list follows the same order as the GNU Coding Standards.)+bindir='${exec_prefix}/bin'+sbindir='${exec_prefix}/sbin'+libexecdir='${exec_prefix}/libexec'+datarootdir='${prefix}/share'+datadir='${datarootdir}'+sysconfdir='${prefix}/etc'+sharedstatedir='${prefix}/com'+localstatedir='${prefix}/var'+includedir='${prefix}/include'+oldincludedir='/usr/include'+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'+infodir='${datarootdir}/info'+htmldir='${docdir}'+dvidir='${docdir}'+pdfdir='${docdir}'+psdir='${docdir}'+libdir='${exec_prefix}/lib'+localedir='${datarootdir}/locale'+mandir='${datarootdir}/man'++ac_prev=+ac_dashdash=+for ac_option+do+ # If the previous option needs an argument, assign it.+ if test -n "$ac_prev"; then+ eval $ac_prev=\$ac_option+ ac_prev=+ continue+ fi++ case $ac_option in+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;+ *) ac_optarg=yes ;;+ esac++ # Accept the important Cygnus configure options, so we can diagnose typos.++ case $ac_dashdash$ac_option in+ --)+ ac_dashdash=yes ;;++ -bindir | --bindir | --bindi | --bind | --bin | --bi)+ ac_prev=bindir ;;+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)+ bindir=$ac_optarg ;;++ -build | --build | --buil | --bui | --bu)+ ac_prev=build_alias ;;+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)+ build_alias=$ac_optarg ;;++ -cache-file | --cache-file | --cache-fil | --cache-fi \+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)+ ac_prev=cache_file ;;+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)+ cache_file=$ac_optarg ;;++ --config-cache | -C)+ cache_file=config.cache ;;++ -datadir | --datadir | --datadi | --datad)+ ac_prev=datadir ;;+ -datadir=* | --datadir=* | --datadi=* | --datad=*)+ datadir=$ac_optarg ;;++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \+ | --dataroo | --dataro | --datar)+ ac_prev=datarootdir ;;+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)+ datarootdir=$ac_optarg ;;++ -disable-* | --disable-*)+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`+ # Reject names that are not valid shell variable names.+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2+ { (exit 1); exit 1; }; }+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`+ eval enable_$ac_feature=no ;;++ -docdir | --docdir | --docdi | --doc | --do)+ ac_prev=docdir ;;+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)+ docdir=$ac_optarg ;;++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)+ ac_prev=dvidir ;;+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)+ dvidir=$ac_optarg ;;++ -enable-* | --enable-*)+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`+ # Reject names that are not valid shell variable names.+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2+ { (exit 1); exit 1; }; }+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`+ eval enable_$ac_feature=\$ac_optarg ;;++ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \+ | --exec | --exe | --ex)+ ac_prev=exec_prefix ;;+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \+ | --exec=* | --exe=* | --ex=*)+ exec_prefix=$ac_optarg ;;++ -gas | --gas | --ga | --g)+ # Obsolete; use --with-gas.+ with_gas=yes ;;++ -help | --help | --hel | --he | -h)+ ac_init_help=long ;;+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)+ ac_init_help=recursive ;;+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)+ ac_init_help=short ;;++ -host | --host | --hos | --ho)+ ac_prev=host_alias ;;+ -host=* | --host=* | --hos=* | --ho=*)+ host_alias=$ac_optarg ;;++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)+ ac_prev=htmldir ;;+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \+ | --ht=*)+ htmldir=$ac_optarg ;;++ -includedir | --includedir | --includedi | --included | --include \+ | --includ | --inclu | --incl | --inc)+ ac_prev=includedir ;;+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \+ | --includ=* | --inclu=* | --incl=* | --inc=*)+ includedir=$ac_optarg ;;++ -infodir | --infodir | --infodi | --infod | --info | --inf)+ ac_prev=infodir ;;+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)+ infodir=$ac_optarg ;;++ -libdir | --libdir | --libdi | --libd)+ ac_prev=libdir ;;+ -libdir=* | --libdir=* | --libdi=* | --libd=*)+ libdir=$ac_optarg ;;++ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \+ | --libexe | --libex | --libe)+ ac_prev=libexecdir ;;+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \+ | --libexe=* | --libex=* | --libe=*)+ libexecdir=$ac_optarg ;;++ -localedir | --localedir | --localedi | --localed | --locale)+ ac_prev=localedir ;;+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)+ localedir=$ac_optarg ;;++ -localstatedir | --localstatedir | --localstatedi | --localstated \+ | --localstate | --localstat | --localsta | --localst | --locals)+ ac_prev=localstatedir ;;+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)+ localstatedir=$ac_optarg ;;++ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)+ ac_prev=mandir ;;+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)+ mandir=$ac_optarg ;;++ -nfp | --nfp | --nf)+ # Obsolete; use --without-fp.+ with_fp=no ;;++ -no-create | --no-create | --no-creat | --no-crea | --no-cre \+ | --no-cr | --no-c | -n)+ no_create=yes ;;++ -no-recursion | --no-recursion | --no-recursio | --no-recursi \+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)+ no_recursion=yes ;;++ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \+ | --oldin | --oldi | --old | --ol | --o)+ ac_prev=oldincludedir ;;+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)+ oldincludedir=$ac_optarg ;;++ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)+ ac_prev=prefix ;;+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)+ prefix=$ac_optarg ;;++ -program-prefix | --program-prefix | --program-prefi | --program-pref \+ | --program-pre | --program-pr | --program-p)+ ac_prev=program_prefix ;;+ -program-prefix=* | --program-prefix=* | --program-prefi=* \+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)+ program_prefix=$ac_optarg ;;++ -program-suffix | --program-suffix | --program-suffi | --program-suff \+ | --program-suf | --program-su | --program-s)+ ac_prev=program_suffix ;;+ -program-suffix=* | --program-suffix=* | --program-suffi=* \+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)+ program_suffix=$ac_optarg ;;++ -program-transform-name | --program-transform-name \+ | --program-transform-nam | --program-transform-na \+ | --program-transform-n | --program-transform- \+ | --program-transform | --program-transfor \+ | --program-transfo | --program-transf \+ | --program-trans | --program-tran \+ | --progr-tra | --program-tr | --program-t)+ ac_prev=program_transform_name ;;+ -program-transform-name=* | --program-transform-name=* \+ | --program-transform-nam=* | --program-transform-na=* \+ | --program-transform-n=* | --program-transform-=* \+ | --program-transform=* | --program-transfor=* \+ | --program-transfo=* | --program-transf=* \+ | --program-trans=* | --program-tran=* \+ | --progr-tra=* | --program-tr=* | --program-t=*)+ program_transform_name=$ac_optarg ;;++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)+ ac_prev=pdfdir ;;+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)+ pdfdir=$ac_optarg ;;++ -psdir | --psdir | --psdi | --psd | --ps)+ ac_prev=psdir ;;+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)+ psdir=$ac_optarg ;;++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \+ | -silent | --silent | --silen | --sile | --sil)+ silent=yes ;;++ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)+ ac_prev=sbindir ;;+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \+ | --sbi=* | --sb=*)+ sbindir=$ac_optarg ;;++ -sharedstatedir | --sharedstatedir | --sharedstatedi \+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \+ | --sharedst | --shareds | --shared | --share | --shar \+ | --sha | --sh)+ ac_prev=sharedstatedir ;;+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \+ | --sha=* | --sh=*)+ sharedstatedir=$ac_optarg ;;++ -site | --site | --sit)+ ac_prev=site ;;+ -site=* | --site=* | --sit=*)+ site=$ac_optarg ;;++ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)+ ac_prev=srcdir ;;+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)+ srcdir=$ac_optarg ;;++ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \+ | --syscon | --sysco | --sysc | --sys | --sy)+ ac_prev=sysconfdir ;;+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)+ sysconfdir=$ac_optarg ;;++ -target | --target | --targe | --targ | --tar | --ta | --t)+ ac_prev=target_alias ;;+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)+ target_alias=$ac_optarg ;;++ -v | -verbose | --verbose | --verbos | --verbo | --verb)+ verbose=yes ;;++ -version | --version | --versio | --versi | --vers | -V)+ ac_init_version=: ;;++ -with-* | --with-*)+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`+ # Reject names that are not valid shell variable names.+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&+ { echo "$as_me: error: invalid package name: $ac_package" >&2+ { (exit 1); exit 1; }; }+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`+ eval with_$ac_package=\$ac_optarg ;;++ -without-* | --without-*)+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`+ # Reject names that are not valid shell variable names.+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&+ { echo "$as_me: error: invalid package name: $ac_package" >&2+ { (exit 1); exit 1; }; }+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`+ eval with_$ac_package=no ;;++ --x)+ # Obsolete; use --with-x.+ with_x=yes ;;++ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \+ | --x-incl | --x-inc | --x-in | --x-i)+ ac_prev=x_includes ;;+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)+ x_includes=$ac_optarg ;;++ -x-libraries | --x-libraries | --x-librarie | --x-librari \+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)+ ac_prev=x_libraries ;;+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)+ x_libraries=$ac_optarg ;;++ -*) { echo "$as_me: error: unrecognized option: $ac_option+Try \`$0 --help' for more information." >&2+ { (exit 1); exit 1; }; }+ ;;++ *=*)+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`+ # Reject names that are not valid shell variable names.+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2+ { (exit 1); exit 1; }; }+ eval $ac_envvar=\$ac_optarg+ export $ac_envvar ;;++ *)+ # FIXME: should be removed in autoconf 3.0.+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}+ ;;++ esac+done++if test -n "$ac_prev"; then+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`+ { echo "$as_me: error: missing argument to $ac_option" >&2+ { (exit 1); exit 1; }; }+fi++# Be sure to have absolute directory names.+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \+ datadir sysconfdir sharedstatedir localstatedir includedir \+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \+ libdir localedir mandir+do+ eval ac_val=\$$ac_var+ case $ac_val in+ [\\/$]* | ?:[\\/]* ) continue;;+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;+ esac+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2+ { (exit 1); exit 1; }; }+done++# There might be people who depend on the old broken behavior: `$host'+# used to hold the argument of --host etc.+# FIXME: To remove some day.+build=$build_alias+host=$host_alias+target=$target_alias++# FIXME: To remove some day.+if test "x$host_alias" != x; then+ if test "x$build_alias" = x; then+ cross_compiling=maybe+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.+ If a cross compiler is detected then cross compile mode will be used." >&2+ elif test "x$build_alias" != "x$host_alias"; then+ cross_compiling=yes+ fi+fi++ac_tool_prefix=+test -n "$host_alias" && ac_tool_prefix=$host_alias-++test "$silent" = yes && exec 6>/dev/null+++ac_pwd=`pwd` && test -n "$ac_pwd" &&+ac_ls_di=`ls -di .` &&+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||+ { echo "$as_me: error: Working directory cannot be determined" >&2+ { (exit 1); exit 1; }; }+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||+ { echo "$as_me: error: pwd does not report name of working directory" >&2+ { (exit 1); exit 1; }; }+++# Find the source files, if location was not specified.+if test -z "$srcdir"; then+ ac_srcdir_defaulted=yes+ # Try the directory containing this script, then the parent directory.+ ac_confdir=`$as_dirname -- "$0" ||+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \+ X"$0" : 'X\(//\)[^/]' \| \+ X"$0" : 'X\(//\)$' \| \+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||+echo X"$0" |+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{+ s//\1/+ q+ }+ /^X\(\/\/\)[^/].*/{+ s//\1/+ q+ }+ /^X\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`+ srcdir=$ac_confdir+ if test ! -r "$srcdir/$ac_unique_file"; then+ srcdir=..+ fi+else+ ac_srcdir_defaulted=no+fi+if test ! -r "$srcdir/$ac_unique_file"; then+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2+ { (exit 1); exit 1; }; }+fi+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"+ac_abs_confdir=`(+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2+ { (exit 1); exit 1; }; }+ pwd)`+# When building in place, set srcdir=.+if test "$ac_abs_confdir" = "$ac_pwd"; then+ srcdir=.+fi+# Remove unnecessary trailing slashes from srcdir.+# Double slashes in file names in object file debugging info+# mess up M-x gdb in Emacs.+case $srcdir in+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;+esac+for ac_var in $ac_precious_vars; do+ eval ac_env_${ac_var}_set=\${${ac_var}+set}+ eval ac_env_${ac_var}_value=\$${ac_var}+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}+ eval ac_cv_env_${ac_var}_value=\$${ac_var}+done++#+# Report the --help message.+#+if test "$ac_init_help" = "long"; then+ # Omit some internal or obsolete options to make the list less imposing.+ # This message is too long to be a string in the A/UX 3.1 sh.+ cat <<_ACEOF+\`configure' configures HDBus 0.1 to adapt to many kinds of systems.++Usage: $0 [OPTION]... [VAR=VALUE]...++To assign environment variables (e.g., CC, CFLAGS...), specify them as+VAR=VALUE. See below for descriptions of some of the useful variables.++Defaults for the options are specified in brackets.++Configuration:+ -h, --help display this help and exit+ --help=short display options specific to this package+ --help=recursive display the short help of all the included packages+ -V, --version display version information and exit+ -q, --quiet, --silent do not print \`checking...' messages+ --cache-file=FILE cache test results in FILE [disabled]+ -C, --config-cache alias for \`--cache-file=config.cache'+ -n, --no-create do not create output files+ --srcdir=DIR find the sources in DIR [configure dir or \`..']++Installation directories:+ --prefix=PREFIX install architecture-independent files in PREFIX+ [$ac_default_prefix]+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX+ [PREFIX]++By default, \`make install' will install all the files in+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify+an installation prefix other than \`$ac_default_prefix' using \`--prefix',+for instance \`--prefix=\$HOME'.++For better control, use the options below.++Fine tuning of the installation directories:+ --bindir=DIR user executables [EPREFIX/bin]+ --sbindir=DIR system admin executables [EPREFIX/sbin]+ --libexecdir=DIR program executables [EPREFIX/libexec]+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]+ --libdir=DIR object code libraries [EPREFIX/lib]+ --includedir=DIR C header files [PREFIX/include]+ --oldincludedir=DIR C header files for non-gcc [/usr/include]+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]+ --infodir=DIR info documentation [DATAROOTDIR/info]+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]+ --mandir=DIR man documentation [DATAROOTDIR/man]+ --docdir=DIR documentation root [DATAROOTDIR/doc/HDBus]+ --htmldir=DIR html documentation [DOCDIR]+ --dvidir=DIR dvi documentation [DOCDIR]+ --pdfdir=DIR pdf documentation [DOCDIR]+ --psdir=DIR ps documentation [DOCDIR]+_ACEOF++ cat <<\_ACEOF+_ACEOF+fi++if test -n "$ac_init_help"; then+ case $ac_init_help in+ short | recursive ) echo "Configuration of HDBus 0.1:";;+ esac+ cat <<\_ACEOF++Some influential environment variables:+ PKG_CONFIG path to pkg-config utility+ DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config+ DBUS_LIBS linker flags for DBUS, overriding pkg-config++Use these variables to override the choices made by `configure' or to help+it to find libraries and programs with nonstandard names/locations.++Report bugs to <martine@danga.com>.+_ACEOF+ac_status=$?+fi++if test "$ac_init_help" = "recursive"; then+ # If there are subdirs, report their specific --help.+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue+ test -d "$ac_dir" || continue+ ac_builddir=.++case "$ac_dir" in+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;+*)+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`+ # A ".." for each directory in $ac_dir_suffix.+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`+ case $ac_top_builddir_sub in+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;+ esac ;;+esac+ac_abs_top_builddir=$ac_pwd+ac_abs_builddir=$ac_pwd$ac_dir_suffix+# for backward compatibility:+ac_top_builddir=$ac_top_build_prefix++case $srcdir in+ .) # We are building in place.+ ac_srcdir=.+ ac_top_srcdir=$ac_top_builddir_sub+ ac_abs_top_srcdir=$ac_pwd ;;+ [\\/]* | ?:[\\/]* ) # Absolute name.+ ac_srcdir=$srcdir$ac_dir_suffix;+ ac_top_srcdir=$srcdir+ ac_abs_top_srcdir=$srcdir ;;+ *) # Relative name.+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix+ ac_top_srcdir=$ac_top_build_prefix$srcdir+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;+esac+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix++ cd "$ac_dir" || { ac_status=$?; continue; }+ # Check for guested configure.+ if test -f "$ac_srcdir/configure.gnu"; then+ echo &&+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive+ elif test -f "$ac_srcdir/configure"; then+ echo &&+ $SHELL "$ac_srcdir/configure" --help=recursive+ else+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2+ fi || ac_status=$?+ cd "$ac_pwd" || { ac_status=$?; break; }+ done+fi++test -n "$ac_init_help" && exit $ac_status+if $ac_init_version; then+ cat <<\_ACEOF+HDBus configure 0.1+generated by GNU Autoconf 2.61++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.+This configure script is free software; the Free Software Foundation+gives unlimited permission to copy, distribute and modify it.+_ACEOF+ exit+fi+cat >config.log <<_ACEOF+This file contains any messages produced by compilers while+running configure, to aid debugging if configure makes a mistake.++It was created by HDBus $as_me 0.1, which was+generated by GNU Autoconf 2.61. Invocation command line was++ $ $0 $@++_ACEOF+exec 5>>config.log+{+cat <<_ASUNAME+## --------- ##+## Platform. ##+## --------- ##++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`+uname -m = `(uname -m) 2>/dev/null || echo unknown`+uname -r = `(uname -r) 2>/dev/null || echo unknown`+uname -s = `(uname -s) 2>/dev/null || echo unknown`+uname -v = `(uname -v) 2>/dev/null || echo unknown`++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`++_ASUNAME++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ echo "PATH: $as_dir"+done+IFS=$as_save_IFS++} >&5++cat >&5 <<_ACEOF+++## ----------- ##+## Core tests. ##+## ----------- ##++_ACEOF+++# Keep a trace of the command line.+# Strip out --no-create and --no-recursion so they do not pile up.+# Strip out --silent because we don't want to record it for future runs.+# Also quote any args containing shell meta-characters.+# Make two passes to allow for proper duplicate-argument suppression.+ac_configure_args=+ac_configure_args0=+ac_configure_args1=+ac_must_keep_next=false+for ac_pass in 1 2+do+ for ac_arg+ do+ case $ac_arg in+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \+ | -silent | --silent | --silen | --sile | --sil)+ continue ;;+ *\'*)+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;+ esac+ case $ac_pass in+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;+ 2)+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"+ if test $ac_must_keep_next = true; then+ ac_must_keep_next=false # Got value, back to normal.+ else+ case $ac_arg in+ *=* | --config-cache | -C | -disable-* | --disable-* \+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \+ | -with-* | --with-* | -without-* | --without-* | --x)+ case "$ac_configure_args0 " in+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;+ esac+ ;;+ -* ) ac_must_keep_next=true ;;+ esac+ fi+ ac_configure_args="$ac_configure_args '$ac_arg'"+ ;;+ esac+ done+done+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }++# When interrupted or exit'd, cleanup temporary files, and complete+# config.log. We remove comments because anyway the quotes in there+# would cause problems or look ugly.+# WARNING: Use '\'' to represent an apostrophe within the trap.+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.+trap 'exit_status=$?+ # Save into config.log some information that might help in debugging.+ {+ echo++ cat <<\_ASBOX+## ---------------- ##+## Cache variables. ##+## ---------------- ##+_ASBOX+ echo+ # The following way of writing the cache mishandles newlines in values,+(+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do+ eval ac_val=\$$ac_var+ case $ac_val in #(+ *${as_nl}*)+ case $ac_var in #(+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;+ esac+ case $ac_var in #(+ _ | IFS | as_nl) ;; #(+ *) $as_unset $ac_var ;;+ esac ;;+ esac+ done+ (set) 2>&1 |+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(+ *${as_nl}ac_space=\ *)+ sed -n \+ "s/'\''/'\''\\\\'\'''\''/g;+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"+ ;; #(+ *)+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"+ ;;+ esac |+ sort+)+ echo++ cat <<\_ASBOX+## ----------------- ##+## Output variables. ##+## ----------------- ##+_ASBOX+ echo+ for ac_var in $ac_subst_vars+ do+ eval ac_val=\$$ac_var+ case $ac_val in+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;+ esac+ echo "$ac_var='\''$ac_val'\''"+ done | sort+ echo++ if test -n "$ac_subst_files"; then+ cat <<\_ASBOX+## ------------------- ##+## File substitutions. ##+## ------------------- ##+_ASBOX+ echo+ for ac_var in $ac_subst_files+ do+ eval ac_val=\$$ac_var+ case $ac_val in+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;+ esac+ echo "$ac_var='\''$ac_val'\''"+ done | sort+ echo+ fi++ if test -s confdefs.h; then+ cat <<\_ASBOX+## ----------- ##+## confdefs.h. ##+## ----------- ##+_ASBOX+ echo+ cat confdefs.h+ echo+ fi+ test "$ac_signal" != 0 &&+ echo "$as_me: caught signal $ac_signal"+ echo "$as_me: exit $exit_status"+ } >&5+ rm -f core *.core core.conftest.* &&+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&+ exit $exit_status+' 0+for ac_signal in 1 2 13 15; do+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal+done+ac_signal=0++# confdefs.h avoids OS command line length limits that DEFS can exceed.+rm -f -r conftest* confdefs.h++# Predefined preprocessor variables.++cat >>confdefs.h <<_ACEOF+#define PACKAGE_NAME "$PACKAGE_NAME"+_ACEOF+++cat >>confdefs.h <<_ACEOF+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"+_ACEOF+++cat >>confdefs.h <<_ACEOF+#define PACKAGE_VERSION "$PACKAGE_VERSION"+_ACEOF+++cat >>confdefs.h <<_ACEOF+#define PACKAGE_STRING "$PACKAGE_STRING"+_ACEOF+++cat >>confdefs.h <<_ACEOF+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"+_ACEOF+++# Let the site file select an alternate cache file if it wants to.+# Prefer explicitly selected file to automatically selected ones.+if test -n "$CONFIG_SITE"; then+ set x "$CONFIG_SITE"+elif test "x$prefix" != xNONE; then+ set x "$prefix/share/config.site" "$prefix/etc/config.site"+else+ set x "$ac_default_prefix/share/config.site" \+ "$ac_default_prefix/etc/config.site"+fi+shift+for ac_site_file+do+ if test -r "$ac_site_file"; then+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5+echo "$as_me: loading site script $ac_site_file" >&6;}+ sed 's/^/| /' "$ac_site_file" >&5+ . "$ac_site_file"+ fi+done++if test -r "$cache_file"; then+ # Some versions of bash will fail to source /dev/null (special+ # files actually), so we avoid doing that.+ if test -f "$cache_file"; then+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5+echo "$as_me: loading cache $cache_file" >&6;}+ case $cache_file in+ [\\/]* | ?:[\\/]* ) . "$cache_file";;+ *) . "./$cache_file";;+ esac+ fi+else+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5+echo "$as_me: creating cache $cache_file" >&6;}+ >$cache_file+fi++# Check that the precious variables saved in the cache have kept the same+# value.+ac_cache_corrupted=false+for ac_var in $ac_precious_vars; do+ eval ac_old_set=\$ac_cv_env_${ac_var}_set+ eval ac_new_set=\$ac_env_${ac_var}_set+ eval ac_old_val=\$ac_cv_env_${ac_var}_value+ eval ac_new_val=\$ac_env_${ac_var}_value+ case $ac_old_set,$ac_new_set in+ set,)+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}+ ac_cache_corrupted=: ;;+ ,set)+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}+ ac_cache_corrupted=: ;;+ ,);;+ *)+ if test "x$ac_old_val" != "x$ac_new_val"; then+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5+echo "$as_me: former value: $ac_old_val" >&2;}+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5+echo "$as_me: current value: $ac_new_val" >&2;}+ ac_cache_corrupted=:+ fi;;+ esac+ # Pass precious variables to config.status.+ if test "$ac_new_set" = set; then+ case $ac_new_val in+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;+ *) ac_arg=$ac_var=$ac_new_val ;;+ esac+ case " $ac_configure_args " in+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;+ esac+ fi+done+if $ac_cache_corrupted; then+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5+echo "$as_me: error: changes in the environment can compromise the build" >&2;}+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}+ { (exit 1); exit 1; }; }+fi++++++++++++++++++++++++++ac_ext=c+ac_cpp='$CPP $CPPFLAGS'+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'+ac_compiler_gnu=$ac_cv_c_compiler_gnu++++++if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then+ if test -n "$ac_tool_prefix"; then+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2+{ echo "$as_me:$LINENO: checking for $ac_word" >&5+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }+if test "${ac_cv_path_PKG_CONFIG+set}" = set; then+ echo $ECHO_N "(cached) $ECHO_C" >&6+else+ case $PKG_CONFIG in+ [\\/]* | ?:[\\/]*)+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.+ ;;+ *)+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ for ac_exec_ext in '' $ac_executable_extensions; do+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5+ break 2+ fi+done+done+IFS=$as_save_IFS++ ;;+esac+fi+PKG_CONFIG=$ac_cv_path_PKG_CONFIG+if test -n "$PKG_CONFIG"; then+ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5+echo "${ECHO_T}$PKG_CONFIG" >&6; }+else+ { echo "$as_me:$LINENO: result: no" >&5+echo "${ECHO_T}no" >&6; }+fi+++fi+if test -z "$ac_cv_path_PKG_CONFIG"; then+ ac_pt_PKG_CONFIG=$PKG_CONFIG+ # Extract the first word of "pkg-config", so it can be a program name with args.+set dummy pkg-config; ac_word=$2+{ echo "$as_me:$LINENO: checking for $ac_word" >&5+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }+if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then+ echo $ECHO_N "(cached) $ECHO_C" >&6+else+ case $ac_pt_PKG_CONFIG in+ [\\/]* | ?:[\\/]*)+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.+ ;;+ *)+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ for ac_exec_ext in '' $ac_executable_extensions; do+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5+ break 2+ fi+done+done+IFS=$as_save_IFS++ ;;+esac+fi+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG+if test -n "$ac_pt_PKG_CONFIG"; then+ { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5+echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; }+else+ { echo "$as_me:$LINENO: result: no" >&5+echo "${ECHO_T}no" >&6; }+fi++ if test "x$ac_pt_PKG_CONFIG" = x; then+ PKG_CONFIG=""+ else+ case $cross_compiling:$ac_tool_warned in+yes:)+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools+whose name does not start with the host triplet. If you think this+configuration is useful to you, please write to autoconf@gnu.org." >&5+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools+whose name does not start with the host triplet. If you think this+configuration is useful to you, please write to autoconf@gnu.org." >&2;}+ac_tool_warned=yes ;;+esac+ PKG_CONFIG=$ac_pt_PKG_CONFIG+ fi+else+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"+fi++fi+if test -n "$PKG_CONFIG"; then+ _pkg_min_version=0.9.0+ { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5+echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; }+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then+ { echo "$as_me:$LINENO: result: yes" >&5+echo "${ECHO_T}yes" >&6; }+ else+ { echo "$as_me:$LINENO: result: no" >&5+echo "${ECHO_T}no" >&6; }+ PKG_CONFIG=""+ fi++fi++pkg_failed=no+{ echo "$as_me:$LINENO: checking for DBUS" >&5+echo $ECHO_N "checking for DBUS... $ECHO_C" >&6; }++if test -n "$PKG_CONFIG"; then+ if test -n "$DBUS_CFLAGS"; then+ pkg_cv_DBUS_CFLAGS="$DBUS_CFLAGS"+ else+ if test -n "$PKG_CONFIG" && \+ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1\"") >&5+ ($PKG_CONFIG --exists --print-errors "dbus-1") 2>&5+ ac_status=$?+ echo "$as_me:$LINENO: \$? = $ac_status" >&5+ (exit $ac_status); }; then+ pkg_cv_DBUS_CFLAGS=`$PKG_CONFIG --cflags "dbus-1" 2>/dev/null`+else+ pkg_failed=yes+fi+ fi+else+ pkg_failed=untried+fi+if test -n "$PKG_CONFIG"; then+ if test -n "$DBUS_LIBS"; then+ pkg_cv_DBUS_LIBS="$DBUS_LIBS"+ else+ if test -n "$PKG_CONFIG" && \+ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"dbus-1\"") >&5+ ($PKG_CONFIG --exists --print-errors "dbus-1") 2>&5+ ac_status=$?+ echo "$as_me:$LINENO: \$? = $ac_status" >&5+ (exit $ac_status); }; then+ pkg_cv_DBUS_LIBS=`$PKG_CONFIG --libs "dbus-1" 2>/dev/null`+else+ pkg_failed=yes+fi+ fi+else+ pkg_failed=untried+fi++++if test $pkg_failed = yes; then++if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then+ _pkg_short_errors_supported=yes+else+ _pkg_short_errors_supported=no+fi+ if test $_pkg_short_errors_supported = yes; then+ DBUS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "dbus-1"`+ else+ DBUS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "dbus-1"`+ fi+ # Put the nasty error message in config.log where it belongs+ echo "$DBUS_PKG_ERRORS" >&5++ { { echo "$as_me:$LINENO: error: Package requirements (dbus-1) were not met:++$DBUS_PKG_ERRORS++Consider adjusting the PKG_CONFIG_PATH environment variable if you+installed software in a non-standard prefix.++Alternatively, you may set the environment variables DBUS_CFLAGS+and DBUS_LIBS to avoid the need to call pkg-config.+See the pkg-config man page for more details.+" >&5+echo "$as_me: error: Package requirements (dbus-1) were not met:++$DBUS_PKG_ERRORS++Consider adjusting the PKG_CONFIG_PATH environment variable if you+installed software in a non-standard prefix.++Alternatively, you may set the environment variables DBUS_CFLAGS+and DBUS_LIBS to avoid the need to call pkg-config.+See the pkg-config man page for more details.+" >&2;}+ { (exit 1); exit 1; }; }+elif test $pkg_failed = untried; then+ { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it+is in your PATH or set the PKG_CONFIG environment variable to the full+path to pkg-config.++Alternatively, you may set the environment variables DBUS_CFLAGS+and DBUS_LIBS to avoid the need to call pkg-config.+See the pkg-config man page for more details.++To get pkg-config, see <http://pkg-config.freedesktop.org/>.+See \`config.log' for more details." >&5+echo "$as_me: error: The pkg-config script could not be found or is too old. Make sure it+is in your PATH or set the PKG_CONFIG environment variable to the full+path to pkg-config.++Alternatively, you may set the environment variables DBUS_CFLAGS+and DBUS_LIBS to avoid the need to call pkg-config.+See the pkg-config man page for more details.++To get pkg-config, see <http://pkg-config.freedesktop.org/>.+See \`config.log' for more details." >&2;}+ { (exit 1); exit 1; }; }+else+ DBUS_CFLAGS=$pkg_cv_DBUS_CFLAGS+ DBUS_LIBS=$pkg_cv_DBUS_LIBS+ { echo "$as_me:$LINENO: result: yes" >&5+echo "${ECHO_T}yes" >&6; }+ :+fi+ac_config_files="$ac_config_files DBus.buildinfo"++cat >confcache <<\_ACEOF+# This file is a shell script that caches the results of configure+# tests run on this system so they can be shared between configure+# scripts and configure runs, see configure's option --config-cache.+# It is not useful on other systems. If it contains results you don't+# want to keep, you may remove or edit it.+#+# config.status only pays attention to the cache file if you give it+# the --recheck option to rerun configure.+#+# `ac_cv_env_foo' variables (set or unset) will be overridden when+# loading this file, other *unset* `ac_cv_foo' will be assigned the+# following values.++_ACEOF++# The following way of writing the cache mishandles newlines in values,+# but we know of no workaround that is simple, portable, and efficient.+# So, we kill variables containing newlines.+# Ultrix sh set writes to stderr and can't be redirected directly,+# and sets the high bit in the cache file unless we assign to the vars.+(+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do+ eval ac_val=\$$ac_var+ case $ac_val in #(+ *${as_nl}*)+ case $ac_var in #(+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;+ esac+ case $ac_var in #(+ _ | IFS | as_nl) ;; #(+ *) $as_unset $ac_var ;;+ esac ;;+ esac+ done++ (set) 2>&1 |+ case $as_nl`(ac_space=' '; set) 2>&1` in #(+ *${as_nl}ac_space=\ *)+ # `set' does not quote correctly, so add quotes (double-quote+ # substitution turns \\\\ into \\, and sed turns \\ into \).+ sed -n \+ "s/'/'\\\\''/g;+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"+ ;; #(+ *)+ # `set' quotes correctly as required by POSIX, so do not add quotes.+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"+ ;;+ esac |+ sort+) |+ sed '+ /^ac_cv_env_/b end+ t clear+ :clear+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/+ t end+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/+ :end' >>confcache+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else+ if test -w "$cache_file"; then+ test "x$cache_file" != "x/dev/null" &&+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5+echo "$as_me: updating cache $cache_file" >&6;}+ cat confcache >$cache_file+ else+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5+echo "$as_me: not updating unwritable cache $cache_file" >&6;}+ fi+fi+rm -f confcache++test "x$prefix" = xNONE && prefix=$ac_default_prefix+# Let make expand exec_prefix.+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'++# Transform confdefs.h into DEFS.+# Protect against shell expansion while executing Makefile rules.+# Protect against Makefile macro expansion.+#+# If the first sed substitution is executed (which looks for macros that+# take arguments), then branch to the quote section. Otherwise,+# look for a macro that doesn't take arguments.+ac_script='+t clear+:clear+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g+t quote+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g+t quote+b any+:quote+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g+s/\[/\\&/g+s/\]/\\&/g+s/\$/$$/g+H+:any+${+ g+ s/^\n//+ s/\n/ /g+ p+}+'+DEFS=`sed -n "$ac_script" confdefs.h`+++ac_libobjs=+ac_ltlibobjs=+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue+ # 1. Remove the extension, and $U if already installed.+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'+ ac_i=`echo "$ac_i" | sed "$ac_script"`+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR+ # will be set to the directory where LIBOBJS objects are built.+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'+done+LIBOBJS=$ac_libobjs++LTLIBOBJS=$ac_ltlibobjs++++: ${CONFIG_STATUS=./config.status}+ac_clean_files_save=$ac_clean_files+ac_clean_files="$ac_clean_files $CONFIG_STATUS"+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5+echo "$as_me: creating $CONFIG_STATUS" >&6;}+cat >$CONFIG_STATUS <<_ACEOF+#! $SHELL+# Generated by $as_me.+# Run this file to recreate the current configuration.+# Compiler output produced by configure, useful for debugging+# configure, is in config.log if it exists.++debug=false+ac_cs_recheck=false+ac_cs_silent=false+SHELL=\${CONFIG_SHELL-$SHELL}+_ACEOF++cat >>$CONFIG_STATUS <<\_ACEOF+## --------------------- ##+## M4sh Initialization. ##+## --------------------- ##++# Be more Bourne compatible+DUALCASE=1; export DUALCASE # for MKS sh+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then+ emulate sh+ NULLCMD=:+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which+ # is contrary to our usage. Disable this feature.+ alias -g '${1+"$@"}'='"$@"'+ setopt NO_GLOB_SUBST+else+ case `(set -o) 2>/dev/null` in+ *posix*) set -o posix ;;+esac++fi+++++# PATH needs CR+# Avoid depending upon Character Ranges.+as_cr_letters='abcdefghijklmnopqrstuvwxyz'+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'+as_cr_Letters=$as_cr_letters$as_cr_LETTERS+as_cr_digits='0123456789'+as_cr_alnum=$as_cr_Letters$as_cr_digits++# The user is always right.+if test "${PATH_SEPARATOR+set}" != set; then+ echo "#! /bin/sh" >conf$$.sh+ echo "exit 0" >>conf$$.sh+ chmod +x conf$$.sh+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then+ PATH_SEPARATOR=';'+ else+ PATH_SEPARATOR=:+ fi+ rm -f conf$$.sh+fi++# Support unset when possible.+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then+ as_unset=unset+else+ as_unset=false+fi+++# IFS+# We need space, tab and new line, in precisely that order. Quoting is+# there to prevent editors from complaining about space-tab.+# (If _AS_PATH_WALK were called with IFS unset, it would disable word+# splitting by setting IFS to empty value.)+as_nl='+'+IFS=" "" $as_nl"++# Find who we are. Look in the path if we contain no directory separator.+case $0 in+ *[\\/]* ) as_myself=$0 ;;+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR+for as_dir in $PATH+do+ IFS=$as_save_IFS+ test -z "$as_dir" && as_dir=.+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break+done+IFS=$as_save_IFS++ ;;+esac+# We did not find ourselves, most probably we were run as `sh COMMAND'+# in which case we are not to be found in the path.+if test "x$as_myself" = x; then+ as_myself=$0+fi+if test ! -f "$as_myself"; then+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2+ { (exit 1); exit 1; }+fi++# Work around bugs in pre-3.0 UWIN ksh.+for as_var in ENV MAIL MAILPATH+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var+done+PS1='$ '+PS2='> '+PS4='+ '++# NLS nuisances.+for as_var in \+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \+ LC_TELEPHONE LC_TIME+do+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then+ eval $as_var=C; export $as_var+ else+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var+ fi+done++# Required to use basename.+if expr a : '\(a\)' >/dev/null 2>&1 &&+ test "X`expr 00001 : '.*\(...\)'`" = X001; then+ as_expr=expr+else+ as_expr=false+fi++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then+ as_basename=basename+else+ as_basename=false+fi+++# Name of the executable.+as_me=`$as_basename -- "$0" ||+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \+ X"$0" : 'X\(//\)$' \| \+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||+echo X/"$0" |+ sed '/^.*\/\([^/][^/]*\)\/*$/{+ s//\1/+ q+ }+ /^X\/\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\/\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`++# CDPATH.+$as_unset CDPATH++++ as_lineno_1=$LINENO+ as_lineno_2=$LINENO+ test "x$as_lineno_1" != "x$as_lineno_2" &&+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO+ # uniformly replaced by the line number. The first 'sed' inserts a+ # line-number line after each line using $LINENO; the second 'sed'+ # does the real work. The second script uses 'N' to pair each+ # line-number line with the line containing $LINENO, and appends+ # trailing '-' during substitution so that $LINENO is not a special+ # case at line end.+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the+ # scripts with optimization help from Paolo Bonzini. Blame Lee+ # E. McMahon (1931-1989) for sed's syntax. :-)+ sed -n '+ p+ /[$]LINENO/=+ ' <$as_myself |+ sed '+ s/[$]LINENO.*/&-/+ t lineno+ b+ :lineno+ N+ :loop+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/+ t loop+ s/-\n.*//+ ' >$as_me.lineno &&+ chmod +x "$as_me.lineno" ||+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2+ { (exit 1); exit 1; }; }++ # Don't try to exec as it changes $[0], causing all sort of problems+ # (the dirname of $[0] is not the place where we might find the+ # original and so on. Autoconf is especially sensitive to this).+ . "./$as_me.lineno"+ # Exit status is that of the last command.+ exit+}+++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then+ as_dirname=dirname+else+ as_dirname=false+fi++ECHO_C= ECHO_N= ECHO_T=+case `echo -n x` in+-n*)+ case `echo 'x\c'` in+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.+ *) ECHO_C='\c';;+ esac;;+*)+ ECHO_N='-n';;+esac++if expr a : '\(a\)' >/dev/null 2>&1 &&+ test "X`expr 00001 : '.*\(...\)'`" = X001; then+ as_expr=expr+else+ as_expr=false+fi++rm -f conf$$ conf$$.exe conf$$.file+if test -d conf$$.dir; then+ rm -f conf$$.dir/conf$$.file+else+ rm -f conf$$.dir+ mkdir conf$$.dir+fi+echo >conf$$.file+if ln -s conf$$.file conf$$ 2>/dev/null; then+ as_ln_s='ln -s'+ # ... but there are two gotchas:+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.+ # In both cases, we have to default to `cp -p'.+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||+ as_ln_s='cp -p'+elif ln conf$$.file conf$$ 2>/dev/null; then+ as_ln_s=ln+else+ as_ln_s='cp -p'+fi+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file+rmdir conf$$.dir 2>/dev/null++if mkdir -p . 2>/dev/null; then+ as_mkdir_p=:+else+ test -d ./-p && rmdir ./-p+ as_mkdir_p=false+fi++if test -x / >/dev/null 2>&1; then+ as_test_x='test -x'+else+ if ls -dL / >/dev/null 2>&1; then+ as_ls_L_option=L+ else+ as_ls_L_option=+ fi+ as_test_x='+ eval sh -c '\''+ if test -d "$1"; then+ test -d "$1/.";+ else+ case $1 in+ -*)set "./$1";;+ esac;+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in+ ???[sx]*):;;*)false;;esac;fi+ '\'' sh+ '+fi+as_executable_p=$as_test_x++# Sed expression to map a string onto a valid CPP name.+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"++# Sed expression to map a string onto a valid variable name.+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"+++exec 6>&1++# Save the log message, to keep $[0] and so on meaningful, and to+# report actual input values of CONFIG_FILES etc. instead of their+# values after options handling.+ac_log="+This file was extended by HDBus $as_me 0.1, which was+generated by GNU Autoconf 2.61. Invocation command line was++ CONFIG_FILES = $CONFIG_FILES+ CONFIG_HEADERS = $CONFIG_HEADERS+ CONFIG_LINKS = $CONFIG_LINKS+ CONFIG_COMMANDS = $CONFIG_COMMANDS+ $ $0 $@++on `(hostname || uname -n) 2>/dev/null | sed 1q`+"++_ACEOF++cat >>$CONFIG_STATUS <<_ACEOF+# Files that config.status was made for.+config_files="$ac_config_files"++_ACEOF++cat >>$CONFIG_STATUS <<\_ACEOF+ac_cs_usage="\+\`$as_me' instantiates files from templates according to the+current configuration.++Usage: $0 [OPTIONS] [FILE]...++ -h, --help print this help, then exit+ -V, --version print version number and configuration settings, then exit+ -q, --quiet do not print progress messages+ -d, --debug don't remove temporary files+ --recheck update $as_me by reconfiguring in the same conditions+ --file=FILE[:TEMPLATE]+ instantiate the configuration file FILE++Configuration files:+$config_files++Report bugs to <bug-autoconf@gnu.org>."++_ACEOF+cat >>$CONFIG_STATUS <<_ACEOF+ac_cs_version="\\+HDBus config.status 0.1+configured by $0, generated by GNU Autoconf 2.61,+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"++Copyright (C) 2006 Free Software Foundation, Inc.+This config.status script is free software; the Free Software Foundation+gives unlimited permission to copy, distribute and modify it."++ac_pwd='$ac_pwd'+srcdir='$srcdir'+_ACEOF++cat >>$CONFIG_STATUS <<\_ACEOF+# If no file are specified by the user, then we need to provide default+# value. By we need to know if files were specified by the user.+ac_need_defaults=:+while test $# != 0+do+ case $1 in+ --*=*)+ ac_option=`expr "X$1" : 'X\([^=]*\)='`+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`+ ac_shift=:+ ;;+ *)+ ac_option=$1+ ac_optarg=$2+ ac_shift=shift+ ;;+ esac++ case $ac_option in+ # Handling of the options.+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)+ ac_cs_recheck=: ;;+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )+ echo "$ac_cs_version"; exit ;;+ --debug | --debu | --deb | --de | --d | -d )+ debug=: ;;+ --file | --fil | --fi | --f )+ $ac_shift+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"+ ac_need_defaults=false;;+ --he | --h | --help | --hel | -h )+ echo "$ac_cs_usage"; exit ;;+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \+ | -silent | --silent | --silen | --sile | --sil | --si | --s)+ ac_cs_silent=: ;;++ # This is an error.+ -*) { echo "$as_me: error: unrecognized option: $1+Try \`$0 --help' for more information." >&2+ { (exit 1); exit 1; }; } ;;++ *) ac_config_targets="$ac_config_targets $1"+ ac_need_defaults=false ;;++ esac+ shift+done++ac_configure_extra_args=++if $ac_cs_silent; then+ exec 6>/dev/null+ ac_configure_extra_args="$ac_configure_extra_args --silent"+fi++_ACEOF+cat >>$CONFIG_STATUS <<_ACEOF+if \$ac_cs_recheck; then+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6+ CONFIG_SHELL=$SHELL+ export CONFIG_SHELL+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion+fi++_ACEOF+cat >>$CONFIG_STATUS <<\_ACEOF+exec 5>>config.log+{+ echo+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX+## Running $as_me. ##+_ASBOX+ echo "$ac_log"+} >&5++_ACEOF+cat >>$CONFIG_STATUS <<_ACEOF+_ACEOF++cat >>$CONFIG_STATUS <<\_ACEOF++# Handling of arguments.+for ac_config_target in $ac_config_targets+do+ case $ac_config_target in+ "DBus.buildinfo") CONFIG_FILES="$CONFIG_FILES DBus.buildinfo" ;;++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}+ { (exit 1); exit 1; }; };;+ esac+done+++# If the user did not use the arguments to specify the items to instantiate,+# then the envvar interface is used. Set only those that are not.+# We use the long form for the default assignment because of an extremely+# bizarre bug on SunOS 4.1.3.+if $ac_need_defaults; then+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files+fi++# Have a temporary directory for convenience. Make it in the build tree+# simply because there is no reason against having it here, and in addition,+# creating and moving files from /tmp can sometimes cause problems.+# Hook for its removal unless debugging.+# Note that there is a small window in which the directory will not be cleaned:+# after its creation but before its name has been assigned to `$tmp'.+$debug ||+{+ tmp=+ trap 'exit_status=$?+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status+' 0+ trap '{ (exit 1); exit 1; }' 1 2 13 15+}+# Create a (secure) tmp directory for tmp files.++{+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&+ test -n "$tmp" && test -d "$tmp"+} ||+{+ tmp=./conf$$-$RANDOM+ (umask 077 && mkdir "$tmp")+} ||+{+ echo "$me: cannot create a temporary directory in ." >&2+ { (exit 1); exit 1; }+}++#+# Set up the sed scripts for CONFIG_FILES section.+#++# No need to generate the scripts if there are no CONFIG_FILES.+# This happens for instance when ./config.status config.h+if test -n "$CONFIG_FILES"; then++_ACEOF++++ac_delim='%!_!# '+for ac_last_try in false false false false false :; do+ cat >conf$$subs.sed <<_ACEOF+SHELL!$SHELL$ac_delim+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim+PACKAGE_NAME!$PACKAGE_NAME$ac_delim+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim+PACKAGE_STRING!$PACKAGE_STRING$ac_delim+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim+exec_prefix!$exec_prefix$ac_delim+prefix!$prefix$ac_delim+program_transform_name!$program_transform_name$ac_delim+bindir!$bindir$ac_delim+sbindir!$sbindir$ac_delim+libexecdir!$libexecdir$ac_delim+datarootdir!$datarootdir$ac_delim+datadir!$datadir$ac_delim+sysconfdir!$sysconfdir$ac_delim+sharedstatedir!$sharedstatedir$ac_delim+localstatedir!$localstatedir$ac_delim+includedir!$includedir$ac_delim+oldincludedir!$oldincludedir$ac_delim+docdir!$docdir$ac_delim+infodir!$infodir$ac_delim+htmldir!$htmldir$ac_delim+dvidir!$dvidir$ac_delim+pdfdir!$pdfdir$ac_delim+psdir!$psdir$ac_delim+libdir!$libdir$ac_delim+localedir!$localedir$ac_delim+mandir!$mandir$ac_delim+DEFS!$DEFS$ac_delim+ECHO_C!$ECHO_C$ac_delim+ECHO_N!$ECHO_N$ac_delim+ECHO_T!$ECHO_T$ac_delim+LIBS!$LIBS$ac_delim+build_alias!$build_alias$ac_delim+host_alias!$host_alias$ac_delim+target_alias!$target_alias$ac_delim+PKG_CONFIG!$PKG_CONFIG$ac_delim+DBUS_CFLAGS!$DBUS_CFLAGS$ac_delim+DBUS_LIBS!$DBUS_LIBS$ac_delim+LIBOBJS!$LIBOBJS$ac_delim+LTLIBOBJS!$LTLIBOBJS$ac_delim+_ACEOF++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 42; then+ break+ elif $ac_last_try; then+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}+ { (exit 1); exit 1; }; }+ else+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "+ fi+done++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`+if test -n "$ac_eof"; then+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`+ ac_eof=`expr $ac_eof + 1`+fi++cat >>$CONFIG_STATUS <<_ACEOF+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end+_ACEOF+sed '+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g+s/^/s,@/; s/!/@,|#_!!_#|/+:n+t n+s/'"$ac_delim"'$/,g/; t+s/$/\\/; p+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n+' >>$CONFIG_STATUS <conf$$subs.sed+rm -f conf$$subs.sed+cat >>$CONFIG_STATUS <<_ACEOF+:end+s/|#_!!_#|//g+CEOF$ac_eof+_ACEOF+++# VPATH may cause trouble with some makes, so we remove $(srcdir),+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and+# trailing colons and then remove the whole line if VPATH becomes empty+# (actually we leave an empty line to preserve line numbers).+if test "x$srcdir" = x.; then+ ac_vpsub='/^[ ]*VPATH[ ]*=/{+s/:*\$(srcdir):*/:/+s/:*\${srcdir}:*/:/+s/:*@srcdir@:*/:/+s/^\([^=]*=[ ]*\):*/\1/+s/:*$//+s/^[^=]*=[ ]*$//+}'+fi++cat >>$CONFIG_STATUS <<\_ACEOF+fi # test -n "$CONFIG_FILES"+++for ac_tag in :F $CONFIG_FILES+do+ case $ac_tag in+ :[FHLC]) ac_mode=$ac_tag; continue;;+ esac+ case $ac_mode$ac_tag in+ :[FHL]*:*);;+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5+echo "$as_me: error: Invalid tag $ac_tag." >&2;}+ { (exit 1); exit 1; }; };;+ :[FH]-) ac_tag=-:-;;+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;+ esac+ ac_save_IFS=$IFS+ IFS=:+ set x $ac_tag+ IFS=$ac_save_IFS+ shift+ ac_file=$1+ shift++ case $ac_mode in+ :L) ac_source=$1;;+ :[FH])+ ac_file_inputs=+ for ac_f+ do+ case $ac_f in+ -) ac_f="$tmp/stdin";;+ *) # Look for the file first in the build tree, then in the source tree+ # (if the path is not absolute). The absolute path cannot be DOS-style,+ # because $ac_f cannot contain `:'.+ test -f "$ac_f" ||+ case $ac_f in+ [\\/$]*) false;;+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;+ esac ||+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5+echo "$as_me: error: cannot find input file: $ac_f" >&2;}+ { (exit 1); exit 1; }; };;+ esac+ ac_file_inputs="$ac_file_inputs $ac_f"+ done++ # Let's still pretend it is `configure' which instantiates (i.e., don't+ # use $as_me), people would be surprised to read:+ # /* config.h. Generated by config.status. */+ configure_input="Generated from "`IFS=:+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."+ if test x"$ac_file" != x-; then+ configure_input="$ac_file. $configure_input"+ { echo "$as_me:$LINENO: creating $ac_file" >&5+echo "$as_me: creating $ac_file" >&6;}+ fi++ case $ac_tag in+ *:-:* | *:-) cat >"$tmp/stdin";;+ esac+ ;;+ esac++ ac_dir=`$as_dirname -- "$ac_file" ||+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \+ X"$ac_file" : 'X\(//\)[^/]' \| \+ X"$ac_file" : 'X\(//\)$' \| \+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||+echo X"$ac_file" |+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{+ s//\1/+ q+ }+ /^X\(\/\/\)[^/].*/{+ s//\1/+ q+ }+ /^X\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`+ { as_dir="$ac_dir"+ case $as_dir in #(+ -*) as_dir=./$as_dir;;+ esac+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {+ as_dirs=+ while :; do+ case $as_dir in #(+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(+ *) as_qdir=$as_dir;;+ esac+ as_dirs="'$as_qdir' $as_dirs"+ as_dir=`$as_dirname -- "$as_dir" ||+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \+ X"$as_dir" : 'X\(//\)[^/]' \| \+ X"$as_dir" : 'X\(//\)$' \| \+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||+echo X"$as_dir" |+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{+ s//\1/+ q+ }+ /^X\(\/\/\)[^/].*/{+ s//\1/+ q+ }+ /^X\(\/\/\)$/{+ s//\1/+ q+ }+ /^X\(\/\).*/{+ s//\1/+ q+ }+ s/.*/./; q'`+ test -d "$as_dir" && break+ done+ test -z "$as_dirs" || eval "mkdir $as_dirs"+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5+echo "$as_me: error: cannot create directory $as_dir" >&2;}+ { (exit 1); exit 1; }; }; }+ ac_builddir=.++case "$ac_dir" in+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;+*)+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`+ # A ".." for each directory in $ac_dir_suffix.+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`+ case $ac_top_builddir_sub in+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;+ esac ;;+esac+ac_abs_top_builddir=$ac_pwd+ac_abs_builddir=$ac_pwd$ac_dir_suffix+# for backward compatibility:+ac_top_builddir=$ac_top_build_prefix++case $srcdir in+ .) # We are building in place.+ ac_srcdir=.+ ac_top_srcdir=$ac_top_builddir_sub+ ac_abs_top_srcdir=$ac_pwd ;;+ [\\/]* | ?:[\\/]* ) # Absolute name.+ ac_srcdir=$srcdir$ac_dir_suffix;+ ac_top_srcdir=$srcdir+ ac_abs_top_srcdir=$srcdir ;;+ *) # Relative name.+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix+ ac_top_srcdir=$ac_top_build_prefix$srcdir+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;+esac+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix+++ case $ac_mode in+ :F)+ #+ # CONFIG_FILE+ #++_ACEOF++cat >>$CONFIG_STATUS <<\_ACEOF+# If the template does not know about datarootdir, expand it.+# FIXME: This hack should be removed a few years after 2.60.+ac_datarootdir_hack=; ac_datarootdir_seen=++case `sed -n '/datarootdir/ {+ p+ q+}+/@datadir@/p+/@docdir@/p+/@infodir@/p+/@localedir@/p+/@mandir@/p+' $ac_file_inputs` in+*datarootdir*) ac_datarootdir_seen=yes;;+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}+_ACEOF+cat >>$CONFIG_STATUS <<_ACEOF+ ac_datarootdir_hack='+ s&@datadir@&$datadir&g+ s&@docdir@&$docdir&g+ s&@infodir@&$infodir&g+ s&@localedir@&$localedir&g+ s&@mandir@&$mandir&g+ s&\\\${datarootdir}&$datarootdir&g' ;;+esac+_ACEOF++# Neutralize VPATH when `$srcdir' = `.'.+# Shell code in configure.ac might set extrasub.+# FIXME: do we really want to maintain this feature?+cat >>$CONFIG_STATUS <<_ACEOF+ sed "$ac_vpsub+$extrasub+_ACEOF+cat >>$CONFIG_STATUS <<\_ACEOF+:t+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b+s&@configure_input@&$configure_input&;t t+s&@top_builddir@&$ac_top_builddir_sub&;t t+s&@srcdir@&$ac_srcdir&;t t+s&@abs_srcdir@&$ac_abs_srcdir&;t t+s&@top_srcdir@&$ac_top_srcdir&;t t+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t+s&@builddir@&$ac_builddir&;t t+s&@abs_builddir@&$ac_abs_builddir&;t t+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t+$ac_datarootdir_hack+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'+which seems to be undefined. Please make sure it is defined." >&5+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'+which seems to be undefined. Please make sure it is defined." >&2;}++ rm -f "$tmp/stdin"+ case $ac_file in+ -) cat "$tmp/out"; rm -f "$tmp/out";;+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;+ esac+ ;;++++ esac++done # for ac_tag+++{ (exit 0); exit 0; }+_ACEOF+chmod +x $CONFIG_STATUS+ac_clean_files=$ac_clean_files_save+++# configure is writing to config.log, and then calls config.status.+# config.status does its own redirection, appending to config.log.+# Unfortunately, on DOS this fails, as config.log is still kept open+# by configure, so config.status won't be able to write to it; its+# output is simply discarded. So we exec the FD to /dev/null,+# effectively closing config.log, so it can be properly (re)opened and+# appended to by config.status. When coming back to configure, we+# need to make the FD available again.+if test "$no_create" != yes; then+ ac_cs_success=:+ ac_config_status_args=+ test "$silent" = yes &&+ ac_config_status_args="$ac_config_status_args --quiet"+ exec 5>/dev/null+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false+ exec 5>>config.log+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which+ # would make configure fail if this is the last instruction.+ $ac_cs_success || { (exit 1); exit 1; }+fi+
− demo/Demo.hs
@@ -1,84 +0,0 @@-{-# OPTIONS -fglasgow-exts -fallow-overlapping-instances #-}--- HDBus -- Haskell bindings for DBus.--- Copyright (C) 2006 Evan Martin <martine@danga.com>--import qualified DBus-import qualified DBus.Connection-import qualified DBus.Message-import Control.Exception-import Data.Int-import Data.Word--main :: IO ()-main = do- DBus.Connection.withConnection DBus.Connection.Session $ \bus -> do- (t1 :: [String]) <- testMethodCall bus DBus.serviceDBus DBus.pathDBus- DBus.interfaceDBus "ListNames" ()- (t2 :: String) <- testMethodCall bus DBus.serviceDBus DBus.pathDBus- DBus.interfaceIntrospectable "Introspect" ()-- --testGaim bus- --testBmp bus- testNotify bus-- signalTest bus--testGaim bus = do- accounts <- gaimCall "GaimAccountsGetAll" ()- let account :: Int32 = head accounts- username <- gaimCall "GaimAccountGetUsername" account- putStrLn $ "First account is " ++ username ++ "." where- gaimCall :: (DBus.Message.Arg a, DBus.Message.Arg b) => String -> a -> IO b- gaimCall = testMethodCall bus "net.sf.gaim.GaimService"- "/net/sf/gaim/GaimObject"- "net.sf.gaim.GaimInterface"--testBmp bus = do- bmpCall "VolumeGet" []- bmpCall "VolumeSet" [50 :: Int32] where- bmpCall = testMethodCall bus "org.beepmediaplayer.bmp" "/SystemControl" "org.beepmediaplayer.bmp"--testNotify bus = do- -- For details on this API, see the desktop notification spec at- -- http://www.galago-project.org/specs/notification/- let args = ("hdbus",- 0 :: Word32, -- don't replace anybody- "", -- no icon- "hdbus calling",- "This message was sent via hdbus.",- [] :: [String],- [] :: DBus.Message.Dict String DBus.Message.Variant,- 3*1000 :: Int32 -- timeout- )- () <- notifyCall "Notify" args- return () where- notifyCall = testMethodCall bus "org.freedesktop.Notifications"- "/org/freedesktop/Notifications"- "org.freedesktop.Notifications"--showArgs :: DBus.Message.Arg a => a -> String-showArgs args = show args ++ " (sig: " ++ DBus.Message.signature args ++ ")"--testMethodCall :: (DBus.Message.Arg a, DBus.Message.Arg b)- => DBus.Connection.Connection- -> DBus.ServiceName -> DBus.PathName -> DBus.InterfaceName- -> String -> a -> IO b-testMethodCall bus name path iface method args = do- putStrLn ""- putStrLn $ "Calling: " ++ show [name, path, iface, method]- putStrLn $ " with args:" ++ showArgs args- do- msg <- DBus.Message.newMethodCall name path iface method- DBus.Message.addArgs msg args- reply <- DBus.Connection.sendWithReplyAndBlock bus msg 2000- replyargs <- DBus.Message.args reply- putStrLn $ "Result: " ++ showArgs replyargs- return replyargs- `catchDyn` (\(e :: DBus.Error) -> do print e; fail "fatal: dbus error")--signalTest bus = do- msg <- DBus.Message.newSignal "/org/neugierig/HDBusTest" "org.neugierg.HDBus" "Test"- ret <- DBus.Connection.send bus msg 0- print ret---- vim: set ts=2 sw=2 et ft=haskell :
− demo/Monitor.hs
@@ -1,132 +0,0 @@-{-# OPTIONS -fglasgow-exts #-}---- ghc --make -ldbus-1 -o monitor Monitor.hs--import qualified DBus-import qualified DBus.Connection-import qualified DBus.Message-import Control.Exception(catchDyn)-import Data.Int-import Data.Word-import Data.Dynamic-import DBus.Message(Arg, variant)-import DBus.Connection(withConnection, readWriteDispatch, addFilter, addMatch, BusType(Session))---type Variant = DBus.Message.Variant-type Bus = DBus.Connection.Connection-type NotifyArgs = (String, Word32, String, String, String,- [String], DBus.Message.Dict String Variant, Int32)---main :: IO ()-main = do- let loop bus = (readWriteDispatch bus (-1) >> loop bus)- withConnection Session $ \bus -> do- addFilter bus $ \msg -> do- path <- DBus.Message.getPath msg- iface <- DBus.Message.getInterface msg- member <- DBus.Message.getMember msg- src <- DBus.Message.getSender msg- dst <- DBus.Message.getDestination msg- errname <- DBus.Message.getErrorName msg- sig <- DBus.Message.getSignature msg- t <- DBus.Message.getType msg- let cstr (Just s) = s- cstr (Nothing) = "null"- let s = "sender="++ cstr src ++ " -> dest="++cstr dst ++ " sig=" ++ sig- let ms = s ++ " path=" ++ cstr path ++ "; interface="++ cstr iface- ++ "; member=" ++ cstr member ++ "\n"- case t of- DBus.Message.MethodCall -> putStr $ "Call " ++ ms- DBus.Message.MethodReturn -> putStr $ "Return " ++ s ++ "\n"- DBus.Message.Error -> putStr $ "Error " ++ s ++ " errname=" ++ cstr errname ++ "\n"- DBus.Message.Signal -> putStr $ "Signal " ++ ms- DBus.Message.Other x -> putStr $ "Other: " ++ (show x) ++ ms- vars <- variantArgs msg- mapM_ (\var -> do- putStr "\t"- print var)- vars- return True- addMatch bus False "type='method_call'"- addMatch bus False "type='method_return'"- addMatch bus False "type='error'"- addMatch bus False "type='signal'"- loop bus--data Tagged = I32 Int32 | W32 Word32 | S String | A [Dynamic] | B Bool | E [Dynamic] [Dynamic] | Invalid--tag :: Dynamic -> Tagged-tag dyn =- case fromDynamic dyn of- Just (i :: Int32) -> I32 i- Nothing ->- case fromDynamic dyn of- Just (word :: Word32) -> W32 word- Nothing ->- case fromDynamic dyn of- Just (s :: String) -> S s - Nothing ->- case fromDynamic dyn of- Just (arr :: [Dynamic]) -> A arr- Nothing ->- case fromDynamic dyn of- Just (b :: Bool) -> B b- Nothing ->- case fromDynamic dyn of- Just (a, b) -> E a b- Nothing -> Invalid--toVariant :: Dynamic -> Variant-toVariant dyn =- case tag dyn of- I32 i -> variant i- W32 w -> variant w- S s -> variant s- A arr -> variant (map toVariant arr)- B b -> variant (if b then (1 :: Int32) else 0)- E a b -> variant (map toVariant a, map toVariant b)- Invalid -> variant "<invalid>"--variantArgs msg = do- (args :: [Dynamic]) <- DBus.Message.args msg- return $ map toVariant args--{--variantArgs msg =- let load msg =- do args <- DBus.Message.args msg;- return args- try cmp els =- catch (do val <- cmp- return $ DBus.Message.variant val)- (\err -> els)- in try ((load msg) :: IO [Dynamic]) $- try ((load msg) :: IO Int32) $- try ((load msg) :: IO Word32) $- try ((load msg) :: IO String) $- try ((load msg) :: IO ()) $- try ((load msg) :: IO [Int32]) $- try ((load msg) :: IO [Word32]) $- try ((load msg) :: IO [String]) $- try ((load msg) :: IO [()]) $- try ((load msg) :: IO NotifyArgs) $- try ((load msg) :: IO Variant)- (putStr "variantArgs failed\n" >> fail "Cannot figure out the type\n")--}--{--snoop :: Arg a => DBus.Message.Message -> IO a-snoop msg = do- args <- DBus.Message.args msg- print (DBus.Message.variant args)- return args--eat :: IO a -> IO ()-eat cmp = cmp >> return ()--try :: IO a -> IO () -> IO ()-try cmp els =- catch (eat cmp) (\err -> els)--}
− doc-prologue.txt
@@ -1,12 +0,0 @@-See the HDBus home page (<http://neugierig.org/software/hdbus/>) for details.--This documentation assumes you already know how the D-Bus API works.--* See the D-Bus wiki- (<http://www.freedesktop.org/wiki/Software/dbus>) for an overview.--* See the D-Bus low-level API tutorial- (<http://www.matthew.ath.cx/misc/dbus>) for more detail.--* See the D-Bus API reference- (<http://dbus.freedesktop.org/doc/api/html/>) for per-function documentation.